This can be used to implement offloaded rssi
threshold, beacon miss or even automatic
in-firmware BSS roaming in the future.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Commit 370e567363 ("ath10k: fix broken traffic for 802.1x in client mode")
introduced a regression on WPA crypto. All keys were treated as if they were
WEP which resulted in WPA being incorrectly installed to fw/hw and subsequently
no traffic.
Reported-by: Marek Puzyniak <marek.puzyniak@tieto.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Commit 548462133d ("ath10k: fix interrupt storm") introduced a
regression. The condition responsible for bringing up monitor vdev was broken
and it was never started for CAC so effectivelly CAC would not detect radar
pulses.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Mistakenly v1 of `ath10k: fix AP/IBSS CSA with
template based fw`
(81a9a17db5) was
applied.
This patch applies the missing bits from v2:
* remove unnecessary locking
* add some (sanity) checks
There are no practical functionality differences
between v1 and v2.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
nfnl_cthelper_parse_tuple() is called from nfnl_cthelper_new(),
nfnl_cthelper_get() and nfnl_cthelper_del(). In each case they pass
a pointer to an nf_conntrack_tuple data structure local variable:
struct nf_conntrack_tuple tuple;
...
ret = nfnl_cthelper_parse_tuple(&tuple, tb[NFCTH_TUPLE]);
The problem is that this local variable is not initialized, and
nfnl_cthelper_parse_tuple() only initializes two fields: src.l3num and
dst.protonum. This leaves all other fields with undefined values
based on whatever is on the stack:
tuple->src.l3num = ntohs(nla_get_be16(tb[NFCTH_TUPLE_L3PROTONUM]));
tuple->dst.protonum = nla_get_u8(tb[NFCTH_TUPLE_L4PROTONUM]);
The symptom observed was that when the rpc and tns helpers were added
then traffic to port 1536 was being sent to user-space.
Signed-off-by: Ian Wilson <iwilson@brocade.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
On a platform in ACPI Hardware-reduced mode, the legacy PIC and
PIT may not be initialized even though they may be present in
silicon. Touching these legacy components causes unexpected
results on the system.
On the Bay Trail-T(ASUS-T100) platform, touching these legacy
components blocks platform hardware low idle power state(S0ix)
during system suspend. So we should bypass them in ACPI hardware
reduced mode.
Suggested-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Li Aubrey <aubrey.li@linux.intel.com>
Cc: <alan@linux.intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/54FFF81C.20703@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
crypto: vmx - Fix assembler perl to use _GLOBAL
Rather than doing things by hand for global symbols to deal with
different calling conventions we already have a macro _GLOBAL in
Linux to handle this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Bring the Kconfig entry up to date with parts supported by
the driver.
Signed-off-by: Soeren Andersen <san@rosetechnology.dk>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
spin_unlock_irqrestore() is called at several
different places before exiting. This patch uses a goto statement
to factorize these calls.
Coccinelle was used to generate this patch.
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces goto statments for error handling
and in cases where a lock needs to be released.
A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)
@candidates exists@
identifier f, label;
statement s;
position p1, p2, p3;
@@
f@p1(...) {
...when any
if@p2(...) {
...when any
s
return@p3 ...;
}
...when any
}
@good1 exists@
identifier candidates.f, candidates.label;
statement candidates.s;
position candidates.p1, candidates.p2;
@@
f@p1(...) {
...when any
if(...) {
...when any
s
return ...;
}
...when any
if@p2(...) {...}
...when any
}
@depends on good1@
identifier candidates.f, candidates.label;
position candidates.p1, candidates.p3;
@@
f@p1(...) {
...when any
* return@p3 ...;
}
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using #ifdefs let's mark suspend and resume methods as
__maybe_unused which will suppress compiler warnings about them being
unused and provide better compile coverage.
Because SIMPLE_DEV_PM_OPS() produces an empty omap_rng_pm structure in
case of !CONFIG_PM_SLEEP neither omap_rng_suspend nor omap_rng_resume
will end up being referenced and the change will not result in
increasing image size.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This implements the GHASH hash algorithm (as used by the GCM AEAD
chaining mode) using the AArch32 version of the 64x64 to 128 bit
polynomial multiplication instruction (vmull.p64) that is part of
the ARMv8 Crypto Extensions.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This implements the ECB, CBC, CTR and XTS asynchronous block ciphers
using the AArch32 versions of the ARMv8 Crypto Extensions for AES.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This implements the SHA-224/256 secure hash algorithm using the AArch32
versions of the ARMv8 Crypto Extensions for SHA2.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This implements the SHA1 secure hash algorithm using the AArch32
versions of the ARMv8 Crypto Extensions for SHA1.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This moves all Kconfig symbols defined in crypto/Kconfig that depend
on CONFIG_ARM to a dedicated Kconfig file in arch/arm/crypto, which is
where the code that implements those features resides as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes the redundant parentheses inorder to make code
simplified. While doing this, the precedence order of the operation
is taken into consideration to keep the logic of the code intact.
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is called on the previous and the next failure branches.
This patch adds the call on the branch where it seems to be missing.
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove FSF address because it's known in the past that it has changed.
Also, remove the pointless "do not change the coding style" comments
because it's one of the reasons why it's in staging and it's quite
contradictory to what it says in TODO. Also, they contain wrong e-mails
of people which are responsible for these drivers - see TODO or
MAINTAINERS for that. We can preserve the original copyright at the top
of the most files because it shows who originally made them.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dgnc_state array of strings is never used anywhere and it seems pretty
useless anyway since the board state enum names speak for themselves.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch uses kcalloc instead of kzalloc function.
A coccinelle script was used to make this change.
Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"dgnc_NumBoards" is the number of initialized elements in the
dgnc_Board[] array so the comparison should be ">=" instead of ">" so we
don't read invalid data. We can remove the special handling of the
empty array now that we've fixed this bug.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the lines are over 80 characters in dgnc_driver.c so fix them by
moving the comments closer to the code, tidying the comments to make
them smaller, and remove a redundant space after +.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the lines are over 80 characters so fix that by moving the
comments before the struct definition and before #define's.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a lot double of blank lines in dgnc_cls.c thus remove them to make
the file follow the CodingStyle. Also, remove one blank line at the
end of dgnc_cls.c.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid deprecated usage of EXTRA_CFLAGS by moving definition of DG_PART into dgnc_driver.h
Signed-off-by: Cass May <cass@cassm.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up Makefile by removing unnecessary definition of DG_NAME.
Signed-off-by: Cass May <cass@cassm.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On success, callback function returns 0. So invert the if condition
check so that we can break out of loop.
Cc: stable@vger.kernel.org
Signed-off-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This reverts commit e4df3a0b62
("i2c: core: Dispose OF IRQ mapping at client removal time")
Calling irq_dispose_mapping() will destroy the mapping and disassociate
the IRQ from the IRQ chip to which it belongs. Keeping it is OK, because
existent mappings are reused properly.
Also, this commit breaks drivers using devm* for IRQ management on
OF-based systems because devm* cleanup happens in device code, after
bus's remove() method returns.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Reported-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[wsa: updated the commit message with findings fromt the other bug report]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Fixes: e4df3a0b62
The device complies to the UAC1 standard but hides that fact with
proprietary descriptors. The autodetect quirk for Roland devices
catches the audio interface but misses the MIDI part, so a specific
quirk is needed.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-by: Rafa Lafuente <rafalafuente@gmail.com>
Tested-by: Raphaël Doursenaud <raphael@doursenaud.fr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In order to facilitate clocksource validation, add a
'max_cycles' field to the clocksource structure which
will hold the maximum cycle value that can safely be
multiplied without potentially causing an overflow.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-4-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The clocksource logic has a number of places where we try to
include a safety margin. Most of these are 12% safety margins,
but they are inconsistently applied and sometimes are applied
on top of each other.
Additionally, in the previous patch, we corrected an issue
where we unintentionally in effect created a 50% safety margin,
which these 12.5% margins where then added to.
So to simplify the logic here, this patch removes the various
12.5% margins, and consolidates adding the margin in one place:
clocks_calc_max_nsecs().
Additionally, Linus prefers a 50% safety margin, as it allows
bad clock values to be more easily caught. This should really
have no net effect, due to the corrected issue earlier which
caused greater then 50% margins to be used w/o issue.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org> (for the sched_clock.c bit)
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The previous clocks_calc_max_nsecs() code had some unecessarily
complex bit logic to find the max interval that could cause
multiplication overflows. Since this is not in the hot
path, just do the divide to make it easier to read.
The previous implementation also had a subtle issue
that it avoided overflows with signed 64-bit values, where
as the intervals are always unsigned. This resulted in
overly conservative intervals, which other safety margins
were then added to, reducing the intended interval length.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a DT binding that lets the DMIC reference voltage source be
specified for each input.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Change flash cell identifiers from max77693-flash to max77693-led
to avoid confusion with NOR/NAND Flash.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add a macro for obtaining the mask of ITORCH register bit fields
related either to FLED1 or FLED2 current output. The expected
arguments are TORCH_IOUT1_SHIFT or TORCH_IOUT2_SHIFT.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The flash part of the max77693 device will depend only on OF, and thus
will not use board files. Since there are no other users of the
struct max77693_led_platform_data its existence is unjustified.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Modify FLASH_EN_SHIFT and TORCH_EN_SHIFT macros to work properly
when passed enum max77693_fled values (0 for FLED1 and 1 for FLED2)
from leds-max77693 driver. Previous definitions were compatible with
one of the previous RFC versions of leds-max77693.c driver, which was
not merged.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
In Quark X1000, there's a single PCI device that provides both
an I2C controller and a GPIO controller. This MFD driver will
split the 2 devices for their respective drivers.
This patch is based on Josef Ahmad's initial work for Quark enabling.
Acked-by: Michael Turquette <mturquette@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Weike Chen <alvin.chen@intel.com>
Signed-off-by: Raymond Tan <raymond.tan@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
