Commit graph

536,164 commits

Author SHA1 Message Date
Markos Chandras
4ee486274e MIPS: mm: c-r4k: Set the correct ISA level
The local_r4k_flush_cache_sigtramp function uses the 'cache'
instruction inside an asm block. However, MIPS R6 changed the
opcode for the cache instruction and as a result of which we
need to set the correct ISA level.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:31 +00:00
Leonid Yegoshin
77f3ee59ee MIPS: mm: tlbex: Use cpu_has_mips_r2_exec_hazard for the EHB instruction
MIPS uses the cpu_has_mips_r2_exec_hazard macro to determine whether the
EHB instruction is available or not. This is necessary for MIPS R6
which also supports the EHB instruction.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:30 +00:00
Markos Chandras
d2e6d30ad1 MIPS: mm: page: Add MIPS R6 support
The MIPS R6 pref instruction only has 9 bits for the immediate
field so skip the micro-assembler PREF instruction if the offset
does not fit in 9 bits. Moreover, bit 30 (Pref_PrepareForStore) is
no longer valid in MIPS R6, so we change the default for all MIPS R6
processors to bit 5 (Pref_StoreStreamed).

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:30 +00:00
Leonid Yegoshin
8c56208aff MIPS: lib: memset: Add MIPS R6 support
MIPS R6 dropped the unaligned load and store instructions so
we need to re-write this part of the code for R6 to store
one byte at a time.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:30 +00:00
Leonid Yegoshin
b0ce4bd535 MIPS: lib: memcpy: Add MIPS R6 support
MIPS R6 does not support the unaligned load and store instructions
so we add a special MIPS R6 case to copy one byte at a time if we
need to read/write to unaligned memory addresses.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:29 +00:00
Markos Chandras
fee313d4b8 MIPS: kernel: syscall: Set the appropriate ISA level for MIPS R6
MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the appropriate ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:29 +00:00
Leonid Yegoshin
0593a44c64 MIPS: kernel: unaligned: Add support for the MIPS R6
The load/store unaligned instructions have been removed in MIPS R6
so we need to re-implement the related macros using the regular
load/store instructions. Moreover, the load/store from coprocessor 2
instructions have been reallocated in Release 6 so we will handle them
in the emulator instead.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:28 +00:00
Markos Chandras
acac4108df MIPS: kernel: cps-vec: Replace "addi" with "addiu"
The "addi" instruction will trap on overflows which is not something
we need in this code, so we replace that with "addiu".

Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00430.html
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: <stable@vger.kernel.org> # v3.15+
Cc: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:28 +00:00
Markos Chandras
938c12824b MIPS: kernel: genex: Set correct ISA level
The jr instruction opcode has changed in R6 so make sure
the correct ISA level is set prior using that instruction.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:28 +00:00
Leonid Yegoshin
8d5b9b771e MIPS: kernel: r4k_fpu: Add support for MIPS R6
Add the MIPS R6 related preprocessor definitions for FPU signal
related functions. MIPS R6 only has FR=1 so avoid checking that
bit on the C0/Status register.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:27 +00:00
Leonid Yegoshin
207083b1da MIPS: kernel: r4k_switch: Add support for MIPS R6
Add the MIPS R6 related preprocessor definitions for save/restore
FPU related functions. We also set the appropriate ISA level
so the final return instruction "jr ra" will produce the correct
opcode on R6.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:27 +00:00
Leonid Yegoshin
9c7d576868 MIPS: kernel: traps: Add MIPS R6 related definitions
Add MIPS R6 support to cache and ftlb exceptions, as well as
to the hwrena and ebase register configuration.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:27 +00:00
Markos Chandras
515a6393db MIPS: kernel: proc: Add MIPS R6 support to /proc/cpuinfo
Print 'mips64r6' and/or 'mips32r6' if the kernel is running on
a MIPS R6 core.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:26 +00:00
Markos Chandras
6ebb496ffc MIPS: kernel: entry.S: Add MIPS R6 related definitions
The instruction hazard barrier in the form of:

jr.hb	ra
nop

is valid on MIPS R6 as well.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:26 +00:00
Leonid Yegoshin
8b8aa636f0 MIPS: kernel: cpu-probe.c: Add support for MIPS R6
Add MIPS R6 support when decoding the config0 c0 register.
Also add MIPS R6 support when examining the ebase c0 register
to get the core number and when getting the shadow set number
from the srsctl c0 register.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:25 +00:00
Leonid Yegoshin
54dac95083 MIPS: kernel: cevt-r4k: Add MIPS R6 to the c0_compare_interrupt handler
Just like MIPS R2, in MIPS R6 it is possible to determine if a
timer interrupt has happened or not.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:25 +00:00
Leonid Yegoshin
180b1e3bfe MIPS: kernel: cpu-bugs64: Do not check R6 cores for existing 64-bit bugs
The current HW bugs checked in cpu-bugs64, do not apply to R6 cores
and they cause compilation problems due to removed <R6 instructions,
so do not check for them for the time being.

Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:24 +00:00
Markos Chandras
82e7ce8149 MIPS: asm: local: Set the appropriate ISA level for MIPS R6
MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the appropriate ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:24 +00:00
Markos Chandras
5753762cbd MIPS: asm: spinlock: Replace "sub" instruction with "addiu"
"sub $reg, imm" is not a real MIPS instruction. The assembler can
replace that with "addi $reg, -imm". However, addi has been removed
from R6, so we replace the "sub" instruction with the "addiu" one.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:23 +00:00
Markos Chandras
1922c356ab MIPS: asm: futex: Set the appropriate ISA level for MIPS R6
MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the appropriate ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:23 +00:00
Markos Chandras
87a927eff4 MIPS: asm: bitops: Update ISA constraints for MIPS R6 support
MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the correct ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:22 +00:00
Markos Chandras
0038df2240 MIPS: asm: atomic: Update ISA constraints for MIPS R6 support
MIPS R6 changed the opcodes for LL/SC instructions so we need to
set the correct ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:22 +00:00
Markos Chandras
fa998ebbc0 MIPS: asm: cmpxchg: Update ISA constraints for MIPS R6 support
MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the correct ISA.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:22 +00:00
Markos Chandras
123e4b3bbc MIPS: Use the new "ZC" constraint for MIPS R6
GCC versions supporting MIPS R6 use the ZC constraint to enforce a
9-bit offset for MIPS R6. We will use that for all MIPS R6 LL/SC
instructions.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:21 +00:00
Markos Chandras
94bfb75ace MIPS: asm: Rename GCC_OFF12_ASM to GCC_OFF_SMALL_ASM
The GCC_OFF12_ASM macro is used for 12-bit immediate constrains
but we will also use it for 9-bit constrains on MIPS R6 so we
rename it to something more appropriate.

Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:21 +00:00
Markos Chandras
a7e07b1ae5 MIPS: asm: spram: Add new symbol for MIPS scratch pad storage
MIPS R6, just like MIPS R2, have scratch pad storage, so add a new
symbol which is selected by MIPS R2 and R6.

Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00389.html
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:20 +00:00
Markos Chandras
934c79231c MIPS: asm: r4kcache: Add MIPS R6 cache unroll functions
MIPS R6 changed the 'cache' instruction opcode and reduced the
offset field to 8 bits. This means we now have to adjust the
base register every 256 bytes and as a result of which we can
no longer use the previous cache functions.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:20 +00:00
Markos Chandras
8716a76356 MIPS: asm: irqflags: Add MIPS R6 related definitions
Add the MIPS R6 related definitions to the IRQ related macros

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:20 +00:00
Markos Chandras
f52fca9713 MIPS: asm: hazards: Add MIPSR6 definitions
Add the MIPSR6 related definitions to MIPS hazards

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:19 +00:00
Leonid Yegoshin
34c56fc1c1 MIPS: asm: cpu: Add MIPSR6 ISA definitions
Add MIPS R6 to the ISA definitions

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:19 +00:00
Markos Chandras
4e0748f5be MIPS: Use generic checksum functions for MIPS R6
The following instructions have been removed from MIPS R6

ulw, ulh, swl, lwr, lwl, swr.

However, all of them are used in the MIPS specific checksum implementation.
As a result of which, we will use the generic checksum on MIPS R6

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:19 +00:00
Markos Chandras
98a833c1fa MIPS: asm: asmmacro: Replace "add" instructions with "addu"
The "add" instruction is actually a macro in binutils and depending on
the size of the immediate it can expand to an "addi" instruction.
However, the "addi" instruction traps on overflows which is not
something we want on address calculation.

Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00121.html
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:18 +00:00
Leonid Yegoshin
226da55f48 MIPS: asm: asmmacro: Add MIPS R6 support to the simple EI/DI variants
EI/DI instructions are available in MIPS R6 so add the needed
definitions.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:18 +00:00
Leonid Yegoshin
6a0e9865b9 MIPS: asm: stackframe: Do not preserve the HI/LO registers on MIPS R6
The HI/LO registers have been removed from MIPS R6. Instructions
such as MULT and DIV have been replaced with a new pair of
instructions for the HI/LO operations for example:

MULT -> MUL, MUH
DIV -> DIV, MOD

So we avoid preserving the pre-R6 HI/LO registers in MIPS R6

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:17 +00:00
Leonid Yegoshin
b840a82c54 MIPS: asm: module: define MODULE_PROC_FAMILY for MIPS R6
Define the MODULE_PROC_FAMILY for the MIPS R6 ISA.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:17 +00:00
Markos Chandras
be5136988e MIPS: asm: compiler: Add new macros to set ISA and arch asm annotations
There are certain places where the code uses .set mips32 or .set mips64
or .set arch=r4000. In preparation of MIPS R6 support, and in order to
use as less #ifdefs as possible, we define new macros to set similar
annotations for MIPS R6.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:14 +00:00
Helge Deller
35e88d5c22 fs/binfmt_som: Drop kernel support for HP-UX SOM binaries
The parisc arch has been the only user of HP-UX SOM binaries.

Support for HP-UX executables was never finished and since we now drop support
for the HP-UX compat layer anyway, it does not makes sense to keep the
BINFMT_SOM support.

Cc: linux-fsdevel@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
2015-02-17 16:29:36 +01:00
Tony Battersby
7772855a99 sg: fix EWOULDBLOCK errors with scsi-mq
With scsi-mq enabled, userspace programs can get unexpected EWOULDBLOCK
(a.k.a. EAGAIN) errors when submitting commands to the SCSI generic
driver.  Fix by calling blk_get_request() with GFP_KERNEL instead of
GFP_ATOMIC.

Note: to avoid introducing a potential deadlock, this patch should be
applied after the patch titled "sg: fix unkillable I/O wait deadlock
with scsi-mq".

Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-02-17 06:57:54 -08:00
Tony Battersby
7568615c10 sg: fix unkillable I/O wait deadlock with scsi-mq
When using the write()/read() interface for submitting commands, the
SCSI generic driver does not call blk_put_request() on a completed SCSI
command until userspace calls read() to get the command completion.
Since scsi-mq uses a fixed number of preallocated requests, this makes
it possible for userspace to exhaust the entire preallocated supply of
requests.  For places in the kernel that call blk_get_request() with
GFP_KERNEL, this can cause the calling process to deadlock in a
permanent unkillable I/O wait in blk_get_request() -> ... -> bt_get().
For places in the kernel that call blk_get_request() with GFP_ATOMIC,
this can cause blk_get_request() always to return -EWOULDBLOCK.  Note
that these problems happen only if scsi-mq is enabled.  Prevent the
problems by calling blk_put_request() as soon as the SCSI command
completes instead of waiting for userspace to call read().

Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-02-17 06:55:32 -08:00
Geert Uytterhoeven
4d9cbff5aa regulator: da9210: Mask all interrupt sources to deassert interrupt line
After boot-up, some events may be set, and cause the da9210 interrupt
line to be asserted. As the da9210 driver doesn't have interrupt support
yet, this causes havoc on systems where the interrupt line is shared
among multiple devices.

This is the case on e.g. r8a7791/koelsch, where the interrupt line is
shared with a da9063 regulator, and the following events are set:

    EVENT_A = 0x00000011 (GPI0 | GPI4)
    EVENT_B = 0x00000002 (NPWRGOOD)

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-17 23:04:15 +09:00
Takashi Iwai
922c88a836 ALSA: hda - Embed struct hda_bus_unsolicited into struct hda_bus
There is no big merit to handle hda_bus_unsolicited object
individually, as it's tightly coupled with the hda_bus object itself.
Embedding it makes the code simpler in the end.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 14:46:40 +01:00
Takashi Iwai
ef7449780e ALSA: hda - Drop hda_bus_template for snd_hda_bus_new()
Instead of copying from the given template, let the caller fills the
fields after creation.  This simplifies the code after all.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 14:23:57 +01:00
Srinivas Pandruvada
ed11977095 HID: sensor-hub: correct dyn_callback_lock IRQ-safe change
Commit 0ccf091d1f ("HID: sensor-hub:
make dyn_callback_lock IRQ-safe) was supposed to change locks
in sensor_hub_get_callback(), but missed.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-17 13:34:45 +01:00
Srinivas Pandruvada
f9d904acb3 HID: hid-sensor-hub: Correct documentation
During changes to the interface, some documentation field comments
were missed. Added missing comments.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-17 13:34:44 +01:00
Darren Salt
afe98939b3 HID: saitek: add USB ID for older R.A.T. 7
Signed-off-by: Darren Salt <devspam@moreofthesa.me.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-17 13:28:00 +01:00
Andrew Duggan
70e003f75f HID: rmi: Print the firmware id of the touchpad
Knowing the firmware id is extremely useful when debugging issues related to
the touchpad. It can be used to determine the hardware, firmware version,
and configuation of the touchpad. This patch queries the firmware id and
prints it as the touchpad is starting so that it will show up in the dmesg
output included in bug reports.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-17 13:25:03 +01:00
Mika Westerberg
f2de746c3f HID: i2c-hid: The interrupt should be level sensitive
The Microsoft HID over I2C specification says two things regarding the
interrupt:

 1) The interrupt should be level sensitive
 2) The device keeps the interrupt asserted as long as it has more reports
    available.

We've seen that at least some Atmel and N-Trig panels keep the line low as
long as they have something to send. The current version of the driver only
detects the first edge but then fails to read rest of the reports (as the
line is still asserted).

Make the driver follow the specification and configure the HID interrupt to
be level sensitive.

The Windows HID over I2C driver also seems to do the same.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-17 13:23:13 +01:00
Lauri Kasanen
a7de9b867b HID: sony: Enable Gasia third-party PS3 controllers
Without this, my "Gasia Co.,Ltd PS(R) Gamepad" would not send
any events. Now everything works including the leds.

Based on work by Andrew Haines and Antonio Ospite.

cc: Antonio Ospite <ao2@ao2.it>
cc: Andrew Haines <AndrewD207@aol.com>
Signed-off-by: Lauri Kasanen <cand@gmx.com>
Reviewed-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-17 13:17:45 +01:00
Milan Plzik
feb6faf1e5 HID: kye: Fix report descriptor for Genius PenSketch M912
Genius PenSketch M912 digitizer tablet sends incorrect report descriptor by
default. This patch replaces it with a corrected one.

Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Reviewed-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-17 13:13:45 +01:00
Rickard Strandqvist
3d66b810eb parisc: Remove unused function
Remove the function smp_send_start() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Helge Deller <deller@gmx.de>
2015-02-17 10:41:19 +01:00