Commit graph

536,164 commits

Author SHA1 Message Date
Laurent Pinchart
b8f80bffd5 iommu/ipmmu-vmsa: Cleanup failures of ARM mapping creation or attachment
The ARM IOMMU mapping needs to be released when attaching the device
fails. Add arm_iommu_release_mapping() to the error code path. This is
safe to call with a NULL mapping, so no specific check is needed.

Cleanup is also missing when failing to create a mapping. Jump to the
error code path in that case instead of returning immediately.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-01-16 18:03:04 +02:00
Kamlakant Patel
866010fb7e gpio: ge: convert to use basic mmio gpio library
This patch converts GE GPIO driver to use basic_mmio_gpio
generic library.

Signed-off-by: Kamlakant Patel <kamlakant.patel@linaro.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-16 16:25:26 +01:00
Sylvain Rochet
73734551f8 ARM: at91/dt: disable pull-up on vbus-gpio (PB16) to reduce power consumption
There is an external resistor divider on PB16, acting like a pull-down,
the pull-up increase power consumption and prevent the vbus detect pin
to reach Vss voltage, ~1.5V mesured on my board, it might not even work
if the pull-up is stronger than usual.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16 16:07:05 +01:00
Krzysztof Kozlowski
67c2b9cb30 ARM: 8207/1: amba: Use inlines instead of macros for amba_pclk_enable/disable
Replace the amba_pclk_enable and amba_pclk_disable macros with static
inline functions and remove checks for IS_ERR. The amba bus clock won't
be ERR because probe would fail before the use of these functions.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-16 14:52:03 +00:00
Nicolas Pitre
c25630381c ARM: 8285/1: remove ARMv3 user access code again
This code was restored with commit 080fc66fb5 ("ARM: Bring back ARMv3 IO
and user access code") because the RiscPC memory bus does not understand
half-word load/stores.  However only the IO code needed restoring since
the alternative user access code contains no half-word accesses, is
already used when CONFIG_PREEMPT is set and runs faster on a StrongARM.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-16 14:49:08 +00:00
Tomasz Figa
56b60b8bce ARM: 8265/1: dts: exynos4: Add nodes for L2 cache controller
This patch adds device tree nodes for L2 cache controller present on
Exynos4 SoCs.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-16 14:35:41 +00:00
Tomasz Figa
30ad527a64 ARM: 8264/1: EXYNOS: Add support for non-secure L2X0 resume
On Exynos SoCs it is necessary to resume operation of L2C early in
assembly code, because otherwise certain systems will crash. This patch
adds necessary code to non-secure resume handler.

[rewrote the code accessing l2x0_saved_regs]

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-16 14:35:39 +00:00
Tomasz Figa
5445b640f3 ARM: 8263/1: EXYNOS: Add .write_sec outer cache callback for L2C-310
Exynos4 SoCs equipped with an L2C-310 cache controller and running under
secure firmware require certain registers of aforementioned IP to be
accessed only from secure mode. This means that SMC calls are required
for certain register writes. To handle this, an implementation of
.write_sec and .configure callbacks is provided by this patch.

[added comment and reworked unconditional call to SMC_CMD_L2X0INVALL]

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-16 14:35:37 +00:00
Tomasz Figa
cf0681ca4c ARM: 8262/1: l2c: Add support for overriding prefetch settings
Firmware on certain boards (e.g. ODROID-U3) can leave incorrect L2C prefetch
settings configured in registers leading to crashes if L2C is enabled
without overriding them. This patch introduces bindings to enable
prefetch settings to be specified from DT and necessary support in the
driver.

[mszyprow: rebased onto v3.18-rc1, added error message when prefetch related
 dt property has been provided without any value]

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-16 14:35:35 +00:00
Tomasz Figa
0c4c2edcae ARM: 8261/1: l2c: Get outer cache .write_sec callback from mach_desc only if not NULL
Certain platforms (i.e. Exynos) might need to set .write_sec callback
from firmware initialization which is happenning in .init_early callback
of machine descriptor. However current code will overwrite the pointer
with whatever is present in machine descriptor, even though it can be
already set earlier. This patch fixes this by making the assignment
conditional, depending on whether current .write_sec callback is NULL.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-16 14:35:33 +00:00
Tomasz Figa
c6d1a2d007 ARM: 8260/1: l2c: Add interface to ask hypervisor to configure L2C
Because certain secure hypervisor do not allow writes to individual L2C
registers, but rather expect set of parameters to be passed as argument
to secure monitor calls, there is a need to provide an interface for the
L2C driver to ask the firmware to configure the hardware according to
specified parameters. This patch adds such.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-16 14:35:31 +00:00
Tomasz Figa
6b49241ac2 ARM: 8259/1: l2c: Refactor the driver to use commit-like interface
Certain implementations of secure hypervisors (namely the one found on
Samsung Exynos-based boards) do not provide access to individual L2C
registers. This makes the .write_sec()-based interface insufficient and
provoking ugly hacks.

This patch is first step to make the driver not rely on availability of
writes to individual registers. This is achieved by refactoring the
driver to use a commit-like operation scheme: all register values are
prepared first and stored in an instance of l2x0_regs struct and then a
single callback is responsible to flush those values to the hardware.

[mszyprow: rebased onto 'ARM: l2c: use l2c_write_sec() for restoring
 latency and filter regs' patch]

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-16 14:35:28 +00:00
Marek Szyprowski
00218241aa ARM: 8258/1: l2c: use l2c_write_sec() for restoring latency and filter regs
All four register for latency and filter settings cannot be written in
non-secure mode and they should go through l2c_write_sec(). More on this
can be found in CoreLink Level 2 Cache Controller L2C-310 Technical
Reference Manual, 3.2. Register summary, table 3.1. This have been checked
the TRM for r3p3, but it should be uniform for all revisions.

Reported-by: Nishanth Menon <nm@ti.com>
Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-16 14:35:26 +00:00
Marek Szyprowski
944e9df1d4 ARM: 8257/1: OMAP2+: use common l2cache initialization code
This patch implements generic DT L2C initialisation (the one from
init_IRQ in arch/arm/kernel/irq.c) for Omap4 and AM43 platforms and
kills the SoC specific stuff in arch/arm/mach-omap2/omap4-common.c.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-16 14:35:24 +00:00
Yalin Wang
0b7857dbeb ARM: 8287/1: add bitrev.h file to support rbit instruction
This patch add bitrev.h file to support rbit instruction,
so that we can do bitrev operation by hardware.

Signed-off-by: Yalin Wang <yalin.wang@sonymobile.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-16 14:06:18 +00:00
Rob Herring
7b09777c18 MIPS: Add struct pci_ops member names to initialization
Some instances of pci_ops initialization rely on the read/write members'
location in the struct. This is fragile and may break when adding new
members to the beginning of the struct.

[ralf@linux-mips.org: indent = with tabs for consistency.]

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Patchwork: https://patchwork.linux-mips.org/patch/8915/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-16 15:04:38 +01:00
Catalin Marinas
0145058c3d arm64: partially revert "ARM: 8167/1: extend the reserved memory for initrd to be page aligned"
This patch partially reverts commit 421520ba98
(only the arm64 part). There is no guarantee that the boot-loader places other
images like dtb in a different page than initrd start/end, especially when the
kernel is built with 64KB pages. When this happens, such pages must not be
freed. The free_reserved_area() already takes care of rounding up "start" and
rounding down "end" to avoid freeing partially used pages.

Cc: <stable@vger.kernel.org> # 3.17+
Reported-by: Peter Maydell <Peter.Maydell@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-01-16 13:57:33 +00:00
Mario Smarduch
7276030a08 KVM: arm/arm64: Enable Dirty Page logging for ARMv8
This patch enables ARMv8 ditry page logging support. Plugs ARMv8 into generic
layer through Kconfig symbol, and drops earlier ARM64 constraints to enable
logging at architecture layer.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 14:42:49 +01:00
Mario Smarduch
9836c6b9ff KVM: arm64: Add HYP interface to flush VM Stage 1/2 TLB entries
This patch adds support for arm64 hyp interface to flush all TLBs associated
with VMID.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 14:42:49 +01:00
Mario Smarduch
8199ed0e7c KVM: arm64: ARMv8 header changes for page logging
This patch adds arm64 helpers to write protect pmds/ptes and retrieve
permissions while logging dirty pages. Also adds prototype to write protect
a memory slot and adds a pmd define to check for read-only pmds.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 14:42:48 +01:00
Mario Smarduch
15a49a44fc KVM: arm: page logging 2nd stage fault handling
This patch adds support for 2nd stage page fault handling while dirty page
logging. On huge page faults, huge pages are dissolved to normal pages, and
rebuilding of 2nd stage huge pages is blocked. In case migration is
canceled this restriction is removed and huge pages may be rebuilt again.

Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-16 14:42:44 +01:00
Mario Smarduch
53c810c364 KVM: arm: dirty logging write protect support
Add support to track dirty pages between user space KVM_GET_DIRTY_LOG ioctl
calls. We call kvm_get_dirty_log_protect() function to do most of the work.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 14:40:15 +01:00
Mario Smarduch
c64735554c KVM: arm: Add initial dirty page locking support
Add support for initial write protection of VM memslots. This patch
series assumes that huge PUDs will not be used in 2nd stage tables, which is
always valid on ARMv7

Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 14:40:14 +01:00
Mario Smarduch
72fc36b600 KVM: arm: Add ARMv7 API to flush TLBs
This patch adds ARMv7 architecture TLB Flush function.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 14:40:14 +01:00
Paolo Bonzini
e108ff2f80 KVM: x86: switch to kvm_get_dirty_log_protect
We now have a generic function that does most of the work of
kvm_vm_ioctl_get_dirty_log, now use it.

Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 14:40:14 +01:00
Mario Smarduch
ba0513b5b8 KVM: Add generic support for dirty page logging
kvm_get_dirty_log() provides generic handling of dirty bitmap, currently reused
by several architectures. Building on that we intrdoduce
kvm_get_dirty_log_protect() adding write protection to mark these pages dirty
for future write access, before next KVM_GET_DIRTY_LOG ioctl call from user
space.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 14:40:14 +01:00
Mario Smarduch
a6d5101661 KVM: Add architecture-defined TLB flush support
Allow architectures to override the generic kvm_flush_remote_tlbs()
function via HAVE_KVM_ARCH_TLB_FLUSH_ALL. ARMv7 will need this to
provide its own TLB flush interface.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
2015-01-16 14:40:14 +01:00
Sravanthi Tangeda
300c34c13e i40e/i40evf: Bump i40e and i40evf versions
Bump i40e to 1.2.6 and i40evf to 1.2.0 version.

Change-ID: Ice127eee3a5a5d1b8765d83cff8c30f9f3b1bc32
Signed-off-by: Sravanthi Tangeda <sravanthi.tangeda@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 05:21:10 -08:00
Neerav Parikh
63d7e5a413 i40e: Support for NPAR iSCSI partition with DCB
Add parsing and reporting of iSCSI capability for a given device or
function.

Also add support for iSCSI partition type with DCB in NPAR mode.
In this mode it is expected that software would configure both the LAN
and iSCSI traffic classes for the iSCSI partition; whereas all the NIC
type partitions will use LAN TC (TC0) only.
Hence, the patch enables querying of DCB configuration in MFP mode and
configures TCs for iSCSI partition type.

Though NIC type partitions may not have more than 1 TC enabled for them
the port may have multiple TCs enabled and hence I40E_FLAG_DCB_ENABLED
will be set/reset on all the partitions based on number of TCs on the
port. This is required as in DCB environment it is expected that all
traffic will be priority tagged.

Change-ID: I8c6e1cfd46c46d8a39c57d9020d9ff8d42ed8a7d
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 05:21:04 -08:00
Jacob Keller
4fda14ca0f i40e: when Rx timestamps disabled set specific mode
Instead of leaving the Rx timestamps in the same mode as before if we
disable the Rx logic, we can set it into a mode that has the fewest
possible timestamps generated. To do this, select only V1 mode, but do
not enable UDP packet recognition. This should eliminate all (or at
least almost all) Rx timestamps, since V1 packets are always over UDP.

Change-ID: If847288e0030a716e059c4c33ab114f2cf038f05
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 05:20:56 -08:00
Jacob Keller
b535a01319 i40e: use same check for Rx hang as for Rx timestamps
It's possible that the user configured only Tx hardware timestamping,
and thus we might be receiving PTP traffic which we timestamp but which
software never reads. In this case we don't want to check for Rx
timestamp hang, because we already know that software won't be handling
them. Thus, we add the same check against pf->ptp_rx as we have in the
Rx timestamp code path.

Change-ID: I66486c8dba307facbff8eace4e52e2f083789d1b
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 05:20:47 -08:00
Shannon Nelson
672415c5f0 i40e: AQ API updates for new commands
Add lldp control commands, add oem ocsd and ocbb commands.

Change-ID: I89eba2bd02013d0a44e1ce900559c54bb15f4a66
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 05:20:37 -08:00
Felix Fietkau
a3e6c1eff5 MIPS: IRQ: Fix disable_irq on CPU IRQs
If the irq_chip does not define .irq_disable, any call to disable_irq
will defer disabling the IRQ until it fires while marked as disabled.
This assumes that the handler function checks for this condition, which
handle_percpu_irq does not. In this case, calling disable_irq leads to
an IRQ storm, if the interrupt fires while disabled.

This optimization is only useful when disabling the IRQ is slow, which
is not true for the MIPS CPU IRQ.

Disable this optimization by implementing .irq_disable and .irq_enable

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8949/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-16 14:03:17 +01:00
Jeff Kirsher
e910ca7cfc i40e: AQ API updates
Fix up NVM config read and write data structs.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 05:02:52 -08:00
Ken Wilson
23244404e2 spi: orion: Add multiple chip select support to spi-orion
This commit adds support for multiple hardware chip selects to spi-orion.
Different SoCs support different number of chip selects (up to
8 on some platforms). The driver allows up to this number, and it is up
to the implementer to only use the chip selects that are available.

Signed-off-by: Ken Wilson <ken.wilson@opengear.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-16 12:38:54 +00:00
Shannon Nelson
8d5e33ad72 i40e: add more struct size checks
Add struct size checks to many of the indirect structs and a few
command structs that were left out previously.

Change-ID: I7810b9af0f04e3ced670639f8671daf7df9b3f4d
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 04:37:49 -08:00
Neerav Parikh
b686ece59b i40e: Issue "Stop LLDP" command for firmware older than v4.3
Disable firmware LLDP agent for NICs with firmware version lower than
v4.3. Added a message when driver disables the firmware LLDP agent on
such NICs.

Change-ID: Ia8abf89439c70cb50e23db82753d7d282265506b
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 04:37:49 -08:00
Johannes Berg
5e06a9e8b6 mac80211: remove doubled semicolon
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-16 13:27:56 +01:00
Geert Uytterhoeven
250215ccf6 MIPS: Remove unused dt_setup_arch()
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8928/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-16 13:10:42 +01:00
Maxime COQUELIN
dd548cf910 ARM: STi: Add STiH418 SoC support
This patch adds support to STiH418 SoC.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-01-16 13:10:21 +01:00
Mark Brown
113620bb89 Merge remote-tracking branch 'regulator/fix/s2mps11' into regulator-linus 2015-01-16 12:05:35 +00:00
Mark Brown
d56133793a Merge remote-tracking branch 'regulator/fix/core' into regulator-linus 2015-01-16 12:05:35 +00:00
James Hogan
c3f134fb39 MIPS: smp-mt,smp-cmp: Enable all HW IRQs on secondary CPUs
Commit 18743d2781 ("irqchip: mips-gic: Stop using per-platform mapping
tables") in v3.19-rc1 changed the routing of IPIs through the GIC to go
to the HW0 IRQ pin along with the rest of the GIC interrupts, rather
than to HW1 and HW2 pins.

This breaks SMP boot using the CMP or MT SMP implementations because HW0
doesn't get unmasked when secondary CPUs are initialised so the IPIs
will never interrupt secondary CPUs (nor any other interrupts routed
through the GIC).

Commit ff1e29ade4 ("MIPS: smp-cps: Enable all hardware interrupts on
secondary CPUs") fixed this in advance for the CPS SMP implementation by
unmasking all hardware interrupt lines for secondary CPUs, so lets do
the same for the CMP and MT implementations.

Fixes: 18743d2781 ("irqchip: mips-gic: Stop using per-platform mapping tables")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9025/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-16 13:02:40 +01:00
Gabriel FERNANDEZ
89ae11c41e ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe & USB3) PHY
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-01-16 13:00:55 +01:00
Gabriel FERNANDEZ
b26373c0da ARM: DT: STi: STiH407: Add DT node for MiPHY28lp
The MiPHY28lp is a Generic PHY which can serve various SATA, PCIe or
USB3 devices. The two first ports can be use for either; both SATA, both
PCIe or one of each in any configuration.
The Third port is only for USB3.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-01-16 12:57:12 +01:00
Jacob Keller
22b4777da2 i40e: check I40E_FLAG_PTP before handling Tx or Rx timestamps
We should not be doing Tx or Rx timestamps if we do not have PTP
enabled. Add checks to ensure that we don't attempt to handle any PTP
related timestamping code if we have not enabled PTP on that PF.

Change-ID: I4335942ae2d5c5f91abfdbeeea02bcace49e7677
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 03:56:54 -08:00
Jacob Keller
ab437b5a0f i40e: only enable PTP interrupt cause if PTP is enabled
We should not blindly enable the PTP interrupt flags for all PFs. We
should only enable the PTP interrupt in PFs which have enabled
PTP.

Change-ID: I051a17cae4c199a2f3cf7852266e27eda6630525
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 03:56:53 -08:00
Catherine Sullivan
65b206d24e i40e/i40evf: Bump i40e/i40evf versions
Bump i40e to 1.2.5 and i40evf to 1.0.7.

Change-ID: I622556829056e3ed42d3b9d285fc5ffb693b21cc
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 03:56:53 -08:00
Sravanthi Tangeda
d67079e539 i40e: Dump Stats string removed from debugfs help command
Dump Stats string has been removed from functional debugfs
help message. Now it does not show up when we echo command to
debugfs/Fortville queue.

Change-ID: I9333473826b574f1afa6ddb785fd7adfbdcb2884
Signed-off-by: Sravanthi Tangeda <sravanthi.tangeda@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 03:56:52 -08:00
Carolyn Wyborny
b294ac70fc i40e: Add define for interrupt name string len
This patch creates a define for interrupt name string configuration that
is large enough to contain full bus/slot info, rather than just netdev->name.

Change-ID: Iaac0d23dfb8526defeed69d91cea85ed4a50ddb2
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16 03:56:52 -08:00