"asm/unaligned.h" is more generic than "access_ok.h", and it may include
"access_ok.h", so need use it instead of "access_ok.h".
During building, "rtllib.h" has already include "asm/unaligned.h", so
will cause building issue. The related error (with allmodconfig under
parisc):
CC [M] drivers/staging/rtl8192e/rtl819x_BAProc.o
In file included from ./arch/parisc/include/asm/unaligned.h:4:0,
from include/linux/ieee80211.h:22,
from include/net/lib80211.h:31,
from drivers/staging/rtl8192e/rtllib.h:45,
from drivers/staging/rtl8192e/rtl819x_BAProc.c:20:
include/linux/unaligned/be_struct.h:6:19: error: redefinition of 'get_unaligned_be16'
static inline u16 get_unaligned_be16(const void *p)
^
In file included from drivers/staging/rtl8192e/rtl819x_BAProc.c:19:0:
include/linux/unaligned/access_ok.h:22:19: note: previous definition of 'get_unaligned_be16' was here
static inline u16 get_unaligned_be16(const void *p)
^
...
For independent from other include files, still suggest it includes
"asm/unaligned.h" too. And also include "asm/byteorder.h" since it is
the first include file".
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The clk_name gets the return value from kasprintf (part of which does the
allocation of the returned buffer). So check the return pointer
before using it for clk_register_fixed_factor.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Reviewed-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get rid of the alternate code paths since these weren't used and have
never been tested according to the in-code comments.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a separate variable to hold the value of REG_SPS0_CTRL to avoid it
getting clobbered and writing out garbage to it, for the case of
eRFPowerState == rf_sleep/rf_off && bRegSSPwrLvl == 1.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix the checkpatch.pl warning
WARNING: Missing a blank line after declaration
Signed-off-by: Anjana Sasindran <anjanasasindran123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skb->len is available locally use that instead.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skb->data is available locally so use that instead.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
*puMACfragNum was part of old legacy functions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Packet filtering is already done in vnt_configure.
A call to MACvSetPacketFilter is not necessary in MACvInitialize as
this will be done by vnt_configure when interface is up.
Also remove macros associated with this function.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move more or less all LCD-related state into struct lcd
in order to get better cohesion; use bool instead of int
where it makes sense.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a defined value instead of magic number comparison
for checking whether a module param value has been set.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rework lcd_init method to make it a little bit more clear about
the precedence of the params, move LCD geometry and pins layout
to the LCD struct and thus make the LCD-related module params
effectively read-only.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make keypad_type and lcd_type module params read-only.
This step also starts making it more clear what is
the precedence of device params coming from different
sources (device profile, runtime module param values etc).
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Start decoupling module params from the actual device state,
both for lcd and keypad, by keeping the params read-only
and moving the device state to related structs.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid magic number and use a comparison with a defined value instead
that checks whether module param has been set by the user to some
value at loading time.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get rid of magic numbers indicating that the value of a module param
is not set. Use a defined value instead.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove useless function and let the kernel call the actual
init function directly.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set default parport module param value to DEFAULT_PARPORT so that
a if-block can be avoided.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixing 80 character limit warnings in octeon/ethernet-rx.c
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DMA operations used by the driver may have been set up to acquire
data from unwanted channels in addition to the wanted channels.
Currently, `interrupt_pci9118_ai_dma()` calls `defragment_dma_buffer()`
to move all the wanted data to the start of the DMA buffer and then
calls `comedi_buf_write_samples()` to copy it all to the comedi async
buffer. Those two functions used to be called from
`move_block_from_dma()` which was absorbed into
`interrupt_pci9118_ai_dma()`.
Reinstate `move_block_from_dma()` but rewrite it to copy data directly
from the wanted fragments of the DMA buffer to the comedi async buffer
without defragmenting the buffer first.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>