Now that the clocks are available in the R-Car Gen2 DT,
add clocks property description to the sata_rcar bindings.
The clocks have been tested on r8a7791 so we use that
as an example of the R-Car SATA node.
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
[geert: Reworded clocks property]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use vmalloc to allocate the buffer for firmware/coefficient download and
rely on the SPI core to split this up into DMA-able chunks. This should
give better performance and means we no longer need to manually split
the download into page size chunks to avoid allocating overly large
continuous memory regions.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Running the driver without execlists and hence PPGTT (either aliasing or
full) isn't a supported configuration on gen9+.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The use of the AHCI_HFLAG_NO_PMP flag is something which we inherited from
the Allwinner android kernel sources, and I've always wanted to test if this
is really necessary.
So recently I've bought a sata port multiplexer, and I've given this a test
spin on both A10 and A20 devices, and it seems to work fine:
[ 2.154456] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.161092] ata1.15: Port Multiplier 1.2, 0x197b:0x0325 r0, 5 ports, feat 0x5/0xf
[ 2.175511] ata1.00: hard resetting link
[ 2.524929] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 2.531430] ata1.01: hard resetting link
[ 2.974465] ata1.01: link resume succeeded after 1 retries
[ 3.094932] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.101431] ata1.02: hard resetting link
[ 4.174466] ata1.02: failed to resume link (SControl 0)
[ 4.180065] ata1.02: SATA link down (SStatus 0 SControl 0)
(and the same for links 3 and 4)
Once the NO_PMP flag is removed it correctly sees the 2 disks which I've
attached, and I can mount and use them just fine.
Unfortunately when I then directly attached a disk to the sata port on the
sunxi SoC, and booted a kernel without the AHCI_HFLAG_NO_PMP flag, it would
not recognize that disk.
It turns out that the sata controller in the sunxi SoCs fails to handle
soft-resets issued to directly attached disks, and when pmp support is
enabled the kernel will always issue a soft-reset.
So add a module parameter to enable pmp usage, and default this to off, so
that directly attached disks keep working normally.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
After removal of the central spinlock nf_conntrack_lock, in
commit 93bb0ceb75 ("netfilter: conntrack: remove central
spinlock nf_conntrack_lock"), it is possible to race against
get_next_corpse().
The race is against the get_next_corpse() cleanup on
the "unconfirmed" list (a per-cpu list with seperate locking),
which set the DYING bit.
Fix this race, in __nf_conntrack_confirm(), by removing the CT
from unconfirmed list before checking the DYING bit. In case
race occured, re-add the CT to the dying list.
While at this, fix coding style of the comment that has been
updated.
Fixes: 93bb0ceb75 ("netfilter: conntrack: remove central spinlock nf_conntrack_lock")
Reported-by: bill bonaparte <programme110@gmail.com>
Signed-off-by: bill bonaparte <programme110@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
intel_ddi.c:955:41: sparse: constant 8400000000 is so big it is long
intel_ddi.c:955:53: sparse: constant 9000000000 is so big it is long
intel_ddi.c:955:65: sparse: constant 9600000000 is so big it is long
intel_ddi.c:1028:23: sparse: constant 9600000000 is so big it is long
intel_ddi.c:1031:23: sparse: constant 9000000000 is so big it is long
intel_ddi.c:1034:23: sparse: constant 8400000000 is so big it is long
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The ARM SMMU driver is compatible with the notion of a type-1 IOMMU in
VFIO.
This patch allows VFIO_IOMMU_TYPE1 to be selected if ARM_SMMU=y.
Signed-off-by: Will Deacon <will.deacon@arm.com>
[aw: update for existing S390 patch]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When domains are set with the DOMAIN_ATTR_NESTING flag, we must ensure
that we allocate them to stage-2 context banks if the hardware permits
it.
This patch adds support for the attribute to the ARM SMMU driver, with
the actual stage being determined depending on the features supported
by the hardware.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently the driver registers IOMMU bus operations for all busses even
if no ARM SMMU is present on a system. Depending on the driver probing
order this prevents the driver for the real IOMMU to register itself as
the bus-wide IOMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Some versions of GCC get unduly upset when confronted with a switch
that doesn't explicitly handle all cases of an enum, despite having an
implicit default case following the actualy switch statement:
drivers/iommu/amd_iommu.c: In function 'amd_iommu_capable':
>> drivers/iommu/amd_iommu.c:3409:2: warning: enumeration value 'IOMMU_CAP_NOEXEC' not handled in switch [-Wswitch]
switch (cap) {
This patch adds a case for IOMMU_CAP_NOEXEC to the amd IOMMU driver to
remove this warning.
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ARM SMMU supports the IOMMU_NOEXEC protection flag. Add the
corresponding IOMMU capability.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Some IOMMUs accept an IOMMU_NOEXEC protection flag in addition to
IOMMU_READ and IOMMU_WRITE. Expose this as an IOMMU capability.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Exposing the XN flag of the SMMU driver as IOMMU_NOEXEC instead of
IOMMU_EXEC makes it enforceable, since for IOMMUs that don't support
the XN flag pages will always be executable.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This completes the optimization from the previous patch, by
removing the KVM_MEM_SLOTS_NUM-iteration loop from insert_memslot.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* pm-domains:
PM / Domains: Fix initial default state of the need_restore flag
PM / Domains: Change prototype for the attach and detach callbacks
* pm-sleep:
PM / sleep: Fix entering suspend-to-IDLE if no freeze_oops is set
* pm-cpufreq:
cpufreq: Avoid crash in resume on SMP without OPP
cpufreq: cpufreq-dt: Fix arguments in clock failure error message
gfs2_fallocate() wasn't updating ctime and mtime when modifying the
inode. Add a call to file_update_time() to do that.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This addresses an issue caught by fsx where the inode size was not being
updated to the expected value after fallocate(2) with mode 0.
The problem was caused by the offset and len parameters being converted
to multiples of the file system's block size, so i_size would be rounded
up to the nearest block size multiple instead of the requested size.
This replaces the per-chunk i_size updates with a single i_size_write on
successful completion of the operation. With this patch gfs2 gets
through a complete run of fsx.
For clarity, the check for (error == 0) following the loop is removed as
all failures before that point jump to out_* labels or return.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
gfs2_fallocate wasn't checking inode_newsize_ok nor get_write_access.
Split out the context setup and inode locking pieces into a separate
function to make it more clear and add these missing calls.
inode_newsize_ok is called conditional on FALLOC_FL_KEEP_SIZE as there
is no need to enforce a file size limit if it isn't going to change.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
One of the reasons for having the simplefb nodes in /chosen, and doing
explicit enumeration of the nodes there, is too allow enumerating them sooner,
so that we get a console earlier on.
Doing this earlier then fs_initcall is not useful, since the fb only turns
into a console when fbcon intializes, which is a fs_initcall too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Various fb drivers register themselves before module_init so as to have a
console as early as possible, this is of little use if fbcon does not
initialize early too.
Fbcon cannot initialize earlier then fs_initcall, because then the creation
of /sys/class/graphics/fbcon will fail.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Update simplefb to support the new preferred location for simplefb dt nodes
under /chosen.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Keep the extern declaration of of_allnodes and friends, when building without
of support, this way code using them can be written like this:
if (IS_ENABLED(CONFIG_OF_PLATFORM) && of_chosen) {
for_each_child_of_node(of_chosen, np)
...
}
And rely on the compiler optimizing it away, avoiding the need for #ifdef-ery.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Since simplefb nodes do not relate directly to hw typically they have been
placed in the root of the devicetree. As the represent runtime information
having them as sub-nodes of /chosen is more logical, specify this.
Also specify when to set the chosen stdout-path property to a simplefb node.
For reliable handover to a hardware specific driver, that driver needs to
know which simplefb to unregister when taking over, specify how the hw driver
can find the matching simplefb node.
Last add some advice on how to fill and use simplefb nodes from a firmware
pov.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This claims and enables clocks listed in the simple framebuffer dt node.
This is needed so that the display engine, in case the required clocks
are known by the kernel code and are described in the dt, will remain
properly enabled.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
[hdegoede@redhat.com: Change clks from list to dynamic array]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use the usual kernel style of goto error_foo to free resources on probe
error. This is a preparation patch for adding clocks support.
While at it also update ioremap_wc error return from ENODEV to ENOMEM.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add a proper struct describing simplefb private data, with the palette in there,
instead of directly storing the palette in the fb_info->par pointer.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Stephen Warren <swarren@nvidia.com>
[hdegoede@redhat.com: drop unnecessary void * cast]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
A simple-framebuffer node represents a framebuffer setup by the firmware /
bootloader. Such a framebuffer may have a number of clocks in use, add a
property to communicate this to the OS.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
During the discussion about adding clock handling code to simplefb, it became
clear that simplefb currently does not have an active maintainer.
I've discussed this with Stephen Warren <swarren@wwwdotorg.org>, the original
author of simplefb, and with his permisson I'm picking up maintainership of
simplefb.
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
earlier we were ignoring the return value of snd_ak4114_create and
always returning 0.
now we are returning the actual status. revo_init is calling this
function, and revo_init is checking the return value.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
buf_size was initialized with snd_pcm_lib_buffer_bytes,
but never used. and so it is safe to be deleted.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
the functions:
snd_ice1712_akm4xxx_build_controls
snd_ice1712_build_pro_mixer
snd_ctl_add
snd_ak4114_build
prodigy192_ak4114_init
snd_ak4113_build
are all returning either 0 or a negetive error value.
so we can easily remove the check for a negative value and return
the value instead.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Usually, "msecs" notation means milli-seconds, and "usecs" notation
means micro-seconds. Since the unit used in the code is micro-seconds,
the notation should be replaced from msecs to usecs.
Link: http://lkml.kernel.org/r/1415171926-9782-2-git-send-email-byungchul.park@lge.com
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On the function_graph tracer, the print_graph_irq() function prints a
trace line with the flag ==========> on an irq handler entry, and the
flag <========== on an irq handler return.
But when the latency-format is enable, it is not printing the
latency-format flags, causing the following error in the trace output:
0) ==========> |
0) d... | smp_apic_timer_interrupt() {
This patch fixes this issue by printing the latency-format flags when
it is enable.
Link: http://lkml.kernel.org/r/7c2e226dac20c940b6242178fab7f0e3c9b5ce58.1415233316.git.bristot@redhat.com
Reviewed-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Printing a single character to a seqfile might as well be done with
seq_putc instead of seq_puts; this avoids a strlen() call and a memory
access. It also shaves another few bytes off the generated code.
Link: http://lkml.kernel.org/r/1415479332-25944-4-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This adds a DT binding documentation for the MT6592 SoC from Mediatek.
Signed-off-by: Howard Chen <ibanezchen@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The mt6592-evb is an evaluation board based on the MT6592 SoC.
Signed-off-by: Howard Chen <ibanezchen@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
* A dtsi for boards based on Mediatek MT6592 SoCs
* Compatible string in arch/arm/mach-mediatek/mediatek.c
Signed-off-by: Howard Chen <ibanezchen@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This allows the "make dtbs" to build the moose and mt8135-evbp1
for MediaTek SoC
Signed-off-by: Joe.C <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
We support more MediaTek SoCs now, update the description.
Signed-off-by: Joe.C <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This patah separate bias level off to standby and off. The standby
level will provide the necessary power for JD and push button
functions.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Found by the UC-KLEE tool: A user could supply less input to
firewire-cdev ioctls than write- or write/read-type ioctl handlers
expect. The handlers used data from uninitialized kernel stack then.
This could partially leak back to the user if the kernel subsequently
generated fw_cdev_event_'s (to be read from the firewire-cdev fd)
which notably would contain the _u64 closure field which many of the
ioctl argument structures contain.
The fact that the handlers would act on random garbage input is a
lesser issue since all handlers must check their input anyway.
The fix simply always null-initializes the entire ioctl argument buffer
regardless of the actual length of expected user input. That is, a
runtime overhead of memset(..., 40) is added to each firewirew-cdev
ioctl() call. [Comment from Clemens Ladisch: This part of the stack is
most likely to be already in the cache.]
Remarks:
- There was never any leak from kernel stack to the ioctl output
buffer itself. IOW, it was not possible to read kernel stack by a
read-type or write/read-type ioctl alone; the leak could at most
happen in combination with read()ing subsequent event data.
- The actual expected minimum user input of each ioctl from
include/uapi/linux/firewire-cdev.h is, in bytes:
[0x00] = 32, [0x05] = 4, [0x0a] = 16, [0x0f] = 20, [0x14] = 16,
[0x01] = 36, [0x06] = 20, [0x0b] = 4, [0x10] = 20, [0x15] = 20,
[0x02] = 20, [0x07] = 4, [0x0c] = 0, [0x11] = 0, [0x16] = 8,
[0x03] = 4, [0x08] = 24, [0x0d] = 20, [0x12] = 36, [0x17] = 12,
[0x04] = 20, [0x09] = 24, [0x0e] = 4, [0x13] = 40, [0x18] = 4.
Reported-by: David Ramos <daramos@stanford.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Add the last ACPI module support which also uses core module like the PCI
part
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The TS3A227E is an autonomous audio accessory detection and
configuration switch that detects 3-pole or 4-pole audio accessories
and configures internal switches to route the signals accordingly.
This chip also has built-in support for the new button standard
described in the Android "Wired audio headset specification" v1.0.
These buttons will be reported on the jack as buttons 0-3 mapped to
KEY_MEDIA, KEY_VOLUMEUP, KEY_VOLUMEDOWN, and KEY_VOICE_COMMAND.
This will be added as an aux_dev and have the jack passed in from the
machine driver.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The push/pop instructions can be suboptimal when saving/restoring large
amounts of data to/from the stack, for example on entry/exit from the
kernel. This is because:
(1) They act on descending addresses (i.e. the newly decremented sp),
which may defeat some hardware prefetchers
(2) They introduce an implicit dependency between each instruction, as
the sp has to be updated in order to resolve the address of the
next access.
This patch removes the push/pop instructions from our kernel entry/exit
macros in favour of ldp/stp plus offset.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Using an explicit adr instruction to set the link register to point at
ret_fast_syscall/ret_to_user can defeat branch and return stack predictors.
Instead, use the standard calling instructions (bl, blr) and have an
unconditional branch as the following instruction.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit d7a49086f2 (arm64: cpuinfo: print info for all CPUs)
attempted to clean up /proc/cpuinfo, but due to concerns regarding
further changes was reverted in commit 5e39977edf (Revert "arm64:
cpuinfo: print info for all CPUs").
There are two major issues with the arm64 /proc/cpuinfo format
currently:
* The "Features" line describes (only) the 64-bit hwcaps, which is
problematic for some 32-bit applications which attempt to parse it. As
the same names are used for analogous ISA features (e.g. aes) despite
these generally being architecturally unrelated, it is not possible to
simply append the 64-bit and 32-bit hwcaps in a manner that might not
be misleading to some applications.
Various potential solutions have appeared in vendor kernels. Typically
the format of the Features line varies depending on whether the task
is 32-bit.
* Information is only printed regarding a single CPU. This does not
match the ARM format, and does not provide sufficient information in
big.LITTLE systems where CPUs are heterogeneous. The CPU information
printed is queried from the current CPU's registers, which is racy
w.r.t. cross-cpu migration.
This patch attempts to solve these issues. The following changes are
made:
* When a task with a LINUX32 personality attempts to read /proc/cpuinfo,
the "Features" line contains the decoded 32-bit hwcaps, as with the
arm port. Otherwise, the decoded 64-bit hwcaps are shown. This aligns
with the behaviour of COMPAT_UTS_MACHINE and COMPAT_ELF_PLATFORM. In
the absense of compat support, the Features line is empty.
The set of hwcaps injected into a task's auxval are unaffected.
* Properties are printed per-cpu, as with the ARM port. The per-cpu
information is queried from pre-recorded cpu information (as used by
the sanity checks).
* As with the previous attempt at fixing up /proc/cpuinfo, the hardware
field is removed. The only users so far are 32-bit applications tied
to particular boards, so no portable applications should be affected,
and this should prevent future tying to particular boards.
The following differences remain:
* No model_name is printed, as this cannot be queried from the hardware
and cannot be provided in a stable fashion. Use of the CPU
{implementor,variant,part,revision} fields is sufficient to identify a
CPU and is portable across arm and arm64.
* The following system-wide properties are not provided, as they are not
possible to provide generally. Programs relying on these are already
tied to particular (32-bit only) boards:
- Hardware
- Revision
- Serial
No software has yet been identified for which these remaining
differences are problematic.
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: cross-distro@lists.linaro.org
Cc: linux-api@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>