Document the PCIe controller on the IPQ5424 platform using the
IPQ9574 bindings as a fallback, since the PCIe on the IPQ5424
is similar to IPQ9574.
Link: https://lore.kernel.org/r/20241213134950.234946-2-quic_mmanikan@quicinc.com
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPU. This interrupt can be used by the device driver to handle
PCIe link specific events such as Link up and Link down, which give the
driver a chance to start bus enumeration on its own when link is up and
initiate link training if link goes to a bad state. The PCIe driver can
still work without this interrupt but it will provide a nice user
experience when device gets plugged and removed.
Document the interrupt as optional for SM8550 and SM8650 platforms.
Link: https://lore.kernel.org/r/20241126-topic-sm8x50-pcie-global-irq-v1-1-4049cfccd073@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Convert device tree binding document mobiveil-pcie.txt to YAML format
and merge layerscape-pcie-gen4.txt into this file.
Additional changes:
- interrupt-names: "aer", "pme", "intr", which align order in examples.
- reg-names: reorder as csr_axi_slave, config_axi_slave to match
layerscape-pcie-gen4 and existing Layerscape DTS users.
Fix below CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dtb: /soc/pcie@3400000: failed to match any schema with compatible: ['fsl,lx2160a-pcie']
Link: https://lore.kernel.org/r/20241211171318.4129818-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: fix typos, whitespace, consistent bus-range usage]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Extended support for more SoCs in apple cpufreq driver (Hector Martin
and Nick Chan).
- Add new cpufreq driver for Airoha SoCs (Christian Marangi).
- Fix using cpufreq-dt as module (Andreas Kemnade).
- Minor fixes for Sparc, scmi, and Qcom drivers (Ethan Carter Edwards,
Sibi Sankar and Manivannan Sadhasivam).
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmeNxBsACgkQ0rkcPK6B
EhyhQBAArv2A97hZz0frOz4PWNpZ7DUSsp8UUhBZ5pzM+ZK3hckgReyxm/n14qbJ
iOvX+S8VenJrartsWDH9ucDiK8r2JvJpc+TNliPKvGkMd1qGDizC3+mgb/zdtJwz
ZrspIdE/5HQ/yVyOylXQr8mpUe6o4Jz/n1vjPZV6CcbxCj8OUvdBriqFvUVAm+Dq
s5EUWeziSdXgholUDlCM2E03yzkLSnf9aJJKzdRhm4raDoMm4rT8RkPXUvPrB+TY
tv1ykTWyLnn6gzRT5o7odAi0lenjWNLJWZcixcY/CAjax6/5RjirYze2vdwZ+g8k
EWd+y84eGSvmcBK5LVvuxN6XZja8pP5sEaZLGknmOsNkIOuNeXKPQXGKBg+SzQlp
atWiHeoTLorkDkCW5Hu6NFnHOKJM+nqPo8vqQPpQty2fUarc3L/k6jZTsyx0+0gX
46axncUenJasvXNQ1Oab3tW4SJ9hpv8AaHUY6TQEwIvGlkBctq/wr37wKDAN0KRy
WhtvCuybIvlaJ2FES61nPMDITV8ZYbKRHYbPP074qqiI2W4sIAjbT+qlx3f/3XWx
Ese7PaPiPg7ZoqUfXPdk77KKSDtbxsg8rCY3eaoKfusgMn5XkVFZgK5N19fAYPtP
5VA2vHQxLpRV8C/yZrmyhrQWFSFdFdtFeMvQrPeBn4QGYR+Rcms=
=J/XA
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.14 from Viresh Kumar:
"- Extended support for more SoCs in apple cpufreq driver (Hector Martin
and Nick Chan).
- Add new cpufreq driver for Airoha SoCs (Christian Marangi).
- Fix using cpufreq-dt as module (Andreas Kemnade).
- Minor fixes for Sparc, scmi, and Qcom drivers (Ethan Carter Edwards,
Sibi Sankar and Manivannan Sadhasivam)."
* tag 'cpufreq-arm-updates-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver
cpufreq: sparc: change kzalloc to kcalloc
cpufreq: qcom: Implement clk_ops::determine_rate() for qcom_cpufreq* clocks
cpufreq: qcom: Fix qcom_cpufreq_hw_recalc_rate() to query LUT if LMh IRQ is not available
cpufreq: apple-soc: Add Apple A7-A8X SoC cpufreq support
cpufreq: apple-soc: Set fallback transition latency to APPLE_DVFS_TRANSITION_TIMEOUT
cpufreq: apple-soc: Increase cluster switch timeout to 400us
cpufreq: apple-soc: Use 32-bit read for status register
cpufreq: apple-soc: Allow per-SoC configuration of APPLE_DVFS_CMD_PS1
cpufreq: apple-soc: Drop setting the PS2 field on M2+
dt-bindings: cpufreq: apple,cluster-cpufreq: Add A7-A11, T2 compatibles
dt-bindings: cpufreq: Document support for Airoha EN7581 CPUFreq
cpufreq: fix using cpufreq-dt as module
cpufreq: scmi: Register for limit change notifications
Document SM8750 compatible for the True Random Number Generator.
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document the crypto engine on the SM8750 Platform.
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmeKvq8RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtJ3wf/bMRrED1k1xtC117yxBthXOZj7Ae0MG3s
cqIDBZ2MSmi596jfmc/FRFTN6Rie7+WQg8MGhpWpJt4WyvCd+IqmluLwuJGg3oHz
KdDQHN766cPb50mykTBY0m+Uh9eqyhaoozzK+KbrJZNLUt/Ri3DOdPInWP/ODKuT
uo9xv25zmOMQuUJlhOlFpOW68y6isuMsnPpgTvbtjndw3nPe+tVIfGPdg3xeQnq1
SG05wmOeJ8obmO1VsnmHPN20F5PfS5t2asu12UafR7KTiJOdP2QXKGNTy+ag7fQ/
9Sq6SzuPpbHHJJ93f0aJOkTUKdQVmk2xfCYNOyPNu1ewLqiVlvnkew==
=Vu+D
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a dt-binding for the Microchip Inter-Processor Communication (IPC)
mailbox controller.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Charlie Jenkins <charlie@rivosinc.com> says:
xtheadvector is a custom extension that is based upon riscv vector
version 0.7.1 [1]. All of the vector routines have been modified to
support this alternative vector version based upon whether xtheadvector
was determined to be supported at boot.
vlenb is not supported on the existing xtheadvector hardware, so a
devicetree property thead,vlenb is added to provide the vlenb to Linux.
There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is
used to request which thead vendor extensions are supported on the
current platform. This allows future vendors to allocate hwprobe keys
for their vendor.
Support for xtheadvector is also added to the vector kselftests.
[1] 95358cb2cc/xtheadvector.adoc
* b4-shazam-merge:
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-0-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add a property analogous to the vlenb CSR so that software can detect
the vector length of each CPU prior to it being brought online.
Currently software has to assume that the vector length read from the
boot CPU applies to all possible CPUs. On T-Head CPUs implementing
pre-ratification vector, reading the th.vlenb CSR may produce an illegal
instruction trap, so this property is required on such systems.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-2-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The xtheadvector ISA extension is described on the T-Head extension spec
Github page [1] at commit 95358cb2cca9.
Link: 95358cb2cc/xtheadvector.adoc [1]
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-1-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Introduce a new property to describe the power budget of the regulator.
This property will allow power management support for regulator consumers
like PSE controllers, enabling them to make decisions based on the
available power capacity.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250115-feature_regulator_pw_budget-v2-2-0a44b949e6bc@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Synopsys DWC3 core is found either as a standalone block or
integrated with vendor glue logic. So far the latter has been described
as two separate IP blocks in DeviceTree, but the two parts are not
separate.
In the case where the core is integrated together with vendor glue,
resources such as clock and resets are often customized by the vendor,
such that the standard properties doesn't make sense.
Split the snps,dwc3 binding in a description of the core properties and
the standard "glue" properties, in order to allow vendor bindings to
inherit the core properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250113-dwc3-refactor-v3-1-d1722075df7b@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Found SpacemiT's K1 uart controller is compatible with
Intel's Xscale uart, but it's still worth to introduce a new compatible.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Add DT binding documentation for the SpacemiT K1 SoC[1] and the Banana
Pi BPi-F3 board[2] which used it.
Link: https://www.spacemit.com/en/spacemit-key-stone-2/ [1]
Link: https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3 [2]
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Matthias Brugger <matthias.bgg@kernel.org>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
The X60 is RISC-V CPU cores from SpacemiT and currently used in their K1
SoC.
Link: https://www.spacemit.com/en/spacemit-x60-core/
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Previous Refclk of i.MX95 PCIe RC is on when system boot to kernel. But
boot firmware change the behavior, it is off when boot. So it must be
turned on when it is used. Also it needs be turned off/on for suspend and
resume.
Add one Refclk for i.MX95 PCIe RC. Increase clocks' maxItems to 5 and keep
the same restriction with other compatible string.
Link: https://lore.kernel.org/r/20241126075702.4099164-2-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add new compatible string fsl,imx8q-pcie-ep for iMX8Q.
The 'reg-names' property only needs 'dbi' and 'addr_space' because the
others are located at a default offset. The new 'clock-names' property
aligns with the Root Complex (RC) naming.
Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-5-c4bfa5193288@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
- Document the System Control registers found on early Meson SoC
-----BEGIN PGP SIGNATURE-----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=LihB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DkTt
-----END PGP SIGNATURE-----
Merge tag 'amlogic-drivers-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic drivers changes for v6.14:
- Document the System Control registers found on early Meson SoC
* tag 'amlogic-drivers-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: Document the System Control registers found on early Meson SoC
Link: https://lore.kernel.org/r/d22513cc-c326-443c-982b-78adf755d3dc@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for the new Snapdragon 8 Elite platform with MTP and
QRD boards, QCS615 platform with the Ride board, QCS8300 platform with
its Ride board, IPQ5424 platform with the RDP466 board, MSM8917 platform
with Xiaomi Redmi 5A, and the SAR2130P platform with the Snapdragon AR2
Gen1 Smart Viewer Development Kit.
On X Elite the HP Omnibook X laptop and the Snapdragon Devkit are added.
The 8cx Gen3-based Huawaei Matebook E Go and Microsoft Windows Dev Kit
2023 are introduced.
IPQ9574 gains PCIe and TRNG descriptions, together with a few other
smaller improvements. TRNG is also enabled on the IPQ5332 platform.
On MSM8994, Huawei Nexus 6P gains power and volume keys support. USB
interrupts are corrected.
On QCM6490 the FairPhone 5 gains camera EEPROM and Rb3Gen2 development
kit gains description of the onboard LEDs.
On QRB4210 RB2 support for HDMI audio playback is added.
SA8775P gains missing clock controllers, CPUs are tied to PSCI power
domains, DisplayPort is introduced and enabled on the Ride board.
On SDM670 the GPU components are described and enabled for Google Pixel
3a, together with camera clock controller and flash LED.
Xiaomi Mi Pad 5 Pro, on SM8250, gets WiFi and Bluetooth enabled.
"global" IRQ for PCIe RC controllers are described on SM8550 and SM8650,
to allow for hotplug events.
Coresight support is added for SM8450, SM8650, X 1 Elite, QCS615,
and QCS8300.
The X Elite platform gains QUP power domains and OPPs, another PCIe
controller, another UART, and its SDHCI controllers. The ASUS Vivobook S
15 gets GPU and lid switch enabled. Microsoft Surface Laptop 7 gains
audio configuration, SD card reader support, and USB retimers. The
Lenovo Yoga Slim 7x gets its LID switch described. Dell XPS 13 gains
retimers described. The Lenovo Thinkpad T14s has additional USB ports
enabled, as well as sound and fingerprint sensor.
USB U1/U2 entry is disabled across a variety of platforms, to improve
USB stability.
sleep clock frequencies are reviewed and corrected for a variety of
platforms, so is also various remoteproc mmio address ranges.
-----BEGIN PGP SIGNATURE-----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=DnFP
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XqwN
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.14
This adds support for the new Snapdragon 8 Elite platform with MTP and
QRD boards, QCS615 platform with the Ride board, QCS8300 platform with
its Ride board, IPQ5424 platform with the RDP466 board, MSM8917 platform
with Xiaomi Redmi 5A, and the SAR2130P platform with the Snapdragon AR2
Gen1 Smart Viewer Development Kit.
On X Elite the HP Omnibook X laptop and the Snapdragon Devkit are added.
The 8cx Gen3-based Huawaei Matebook E Go and Microsoft Windows Dev Kit
2023 are introduced.
IPQ9574 gains PCIe and TRNG descriptions, together with a few other
smaller improvements. TRNG is also enabled on the IPQ5332 platform.
On MSM8994, Huawei Nexus 6P gains power and volume keys support. USB
interrupts are corrected.
On QCM6490 the FairPhone 5 gains camera EEPROM and Rb3Gen2 development
kit gains description of the onboard LEDs.
On QRB4210 RB2 support for HDMI audio playback is added.
SA8775P gains missing clock controllers, CPUs are tied to PSCI power
domains, DisplayPort is introduced and enabled on the Ride board.
On SDM670 the GPU components are described and enabled for Google Pixel
3a, together with camera clock controller and flash LED.
Xiaomi Mi Pad 5 Pro, on SM8250, gets WiFi and Bluetooth enabled.
"global" IRQ for PCIe RC controllers are described on SM8550 and SM8650,
to allow for hotplug events.
Coresight support is added for SM8450, SM8650, X 1 Elite, QCS615,
and QCS8300.
The X Elite platform gains QUP power domains and OPPs, another PCIe
controller, another UART, and its SDHCI controllers. The ASUS Vivobook S
15 gets GPU and lid switch enabled. Microsoft Surface Laptop 7 gains
audio configuration, SD card reader support, and USB retimers. The
Lenovo Yoga Slim 7x gets its LID switch described. Dell XPS 13 gains
retimers described. The Lenovo Thinkpad T14s has additional USB ports
enabled, as well as sound and fingerprint sensor.
USB U1/U2 entry is disabled across a variety of platforms, to improve
USB stability.
sleep clock frequencies are reviewed and corrected for a variety of
platforms, so is also various remoteproc mmio address ranges.
* tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (240 commits)
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
arm64: dts: qcom: ipq5424: add scm node
arm64: dts: qcom: sm8250: Fix interrupt types of camss interrupts
arm64: dts: qcom: sdm845: Fix interrupt types of camss interrupts
arm64: dts: qcom: sc8280xp: Fix interrupt type of camss interrupts
arm64: dts: qcom: qcs8300-ride: Enable USB controllers
arm64: dts: qcom: qcs8300: Add support for usb nodes
arm64: dts: qcom: qcs8300: Add support for clock controllers
arm64: dts: qcom: sm8450: Add coresight nodes
arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions
arm64: dts: qcom: qcs615-ride: Enable UFS node
arm64: dts: qcom: qcs615: add UFS node
arm64: dts: qcom: ipq5424: Add USB controller and phy nodes
...
Link: https://lore.kernel.org/r/20250111181025.394631-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
(SoM + baseboard) and Pi2 (SBC), Firefly ITX-3588J (Core-3588J SoM),
Orange Pi 5 Max.
A interesting case is the Radxa E52C using a soc called rk3582. This is
rk3588-variant where some cpu cores are disabled during production and
the bootloader needs to read the available cores from efuses and adapt
the DT it hands over to the kernel.
New supported peripherals are just the naneng combophy + the usb
controllers using them on the rk3576 as well as the arm,smmu attached
to the PCI controller on rk3588.
And finally there are of course a number of board-specific enablements
and refinements (MCU on Qnap-TS433, USB3 on NanoPi R6C/R6S and Orange Pi
5+ etc.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmeBsd0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgb3ACACUZKG31p8IQ2dzkbR+0HZSNef3F2q+ENcP
/NLqeLSzMbs2FbyWu4yRrymrQyeBsIsrH0/catdoj+Z5fMp8VvD6eabN6u/35pEy
Tl0K8PgYs6FAQ4Lm4dl0Z+D/g7R1/uOphQdRbrcsFKnfC4rXGkXrWb9fbg1ejN9A
tOPORXVXXOv4aCMV7gmyC5WdlkFTjpG0prgFf88edj1LQSTfk9mRE0G+tTe9jvQq
FfDqCF71ckODrV2yrYJMw6+7t/oi0ewxfM8J33dofs8xxDjT5kw+3FR9PxCe8cBL
NnyjC0ntYykgDWTrTJSDeETto2zA4BoRU4LSizD+ZZQrcUZirVj6
=4vmj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=c5iW
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards rk3576-evb1, H96 Max V58 TV Box (rk3588), BigTreeTech CB2
(SoM + baseboard) and Pi2 (SBC), Firefly ITX-3588J (Core-3588J SoM),
Orange Pi 5 Max.
A interesting case is the Radxa E52C using a soc called rk3582. This is
rk3588-variant where some cpu cores are disabled during production and
the bootloader needs to read the available cores from efuses and adapt
the DT it hands over to the kernel.
New supported peripherals are just the naneng combophy + the usb
controllers using them on the rk3576 as well as the arm,smmu attached
to the PCI controller on rk3588.
And finally there are of course a number of board-specific enablements
and refinements (MCU on Qnap-TS433, USB3 on NanoPi R6C/R6S and Orange Pi
5+ etc.
* tag 'v6.14-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits)
arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM
dt-bindings: arm: rockchip: Add Firefly ITX-3588J board
arm64: dts: rockchip: Add Orange Pi 5 Max board
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max
arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
arm64: dts: rockchip: add WLAN to rk3588-evb1 controller
arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma
arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes
arm64: dts: rockchip: enable hdmi out audio on wolfvision pf5
arm64: dts: rockchip: fix num-channels property of wolfvision pf5 mic
arm64: dts: rockchip: Enable the USB 3.0 port on NanoPi R6C/R6S
arm64: dts: rockchip: Add FRAM MB85RS128TY to rk3568-mecsbc
arm64: dts: rockchip: Remove unused i2c2 node from rk3568-mecsbc
arm64: dts: rockchip: Fix PCIe3 handling for Edgeble-6TOPS Modules
arm64: dts: rockchip: Add Radxa E52C
dt-bindings: arm: rockchip: Add Radxa E52C
arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2
dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2
arm64: dts: rockchip: Enable USB 3.0 ports on orangepi-5-plus
arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC
...
Link: https://lore.kernel.org/r/2193001.3Lj2Plt8kZ@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 6.14:
- Dave adds the display pipeline DT nodes on BCM2712 (Raspberry Pi 5)
- Rob removes some undocumented properties
- Same ensures that the CFE stub area is reserved to allow secondary
CPUs to be successfully brought up in Linux, also making sure that the
address used in the spin table is also carved out. Finally he adds
support for the Zyxel EX3510-B router using BCM4906
- Rosen converts the BCM4908 platforms to use the more flexible
nvmem-layout representation
-----BEGIN PGP SIGNATURE-----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=Cpr3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=tcyR
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.14/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.14:
- Dave adds the display pipeline DT nodes on BCM2712 (Raspberry Pi 5)
- Rob removes some undocumented properties
- Same ensures that the CFE stub area is reserved to allow secondary
CPUs to be successfully brought up in Linux, also making sure that the
address used in the spin table is also carved out. Finally he adds
support for the Zyxel EX3510-B router using BCM4906
- Rosen converts the BCM4908 platforms to use the more flexible
nvmem-layout representation
* tag 'arm-soc/for-6.14/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: bcm4908: nvmem-layout conversion
arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B
dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906
arm64: dts: broadcom: bcmbca: bcm4908: Protect cpu-release-addr
arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
arm64: dts: broadcom: Remove unused and undocumented properties
arm64: dts: broadcom: Add DT for D-step version of BCM2712
arm64: dts: broadcom: Add display pipeline support to BCM2712
arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT
Link: https://lore.kernel.org/r/20250109224756.3632025-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 6.14, please pull the following:
- Rob removes some unused and undocumented properties pertaining to the
SPI flash controller on Broadcom boards
- Linus adds a number of BCM6846 peripherals: HWRNG, watchdog, GPIO,
MDIO, LED controller, DMA and then proceeds with adding support for
the GEnexsis XG6846B PON router
- Rosen sets the MAC address NVMEM reference on the Meraki MR26 platform
-----BEGIN PGP SIGNATURE-----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=mywr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zz0Y
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.14/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 6.14, please pull the following:
- Rob removes some unused and undocumented properties pertaining to the
SPI flash controller on Broadcom boards
- Linus adds a number of BCM6846 peripherals: HWRNG, watchdog, GPIO,
MDIO, LED controller, DMA and then proceeds with adding support for
the GEnexsis XG6846B PON router
- Rosen sets the MAC address NVMEM reference on the Meraki MR26 platform
* tag 'arm-soc/for-6.14/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: meraki-mr26: set mac address for gmac0
ARM: dts: broadcom: Add Genexis XG6846B DTS file
dt-bindings: arm: bcmbca: Add Genexis XG6846B
dt-bindings: vendor-prefixes: Add Genexis
ARM: dts: bcm6846: Add ARM PL081 DMA block
ARM: dts: bcm6846: Add LED controller
ARM: dts: bcm6846: Add MDIO control block
ARM: dts: bcm6846: Add GPIO blocks
ARM: dts: bcm6846: Enable watchdog
ARM: dts: bcm6846: Add iproc rng
arm: dts: broadcom: Remove unused and undocumented properties
Link: https://lore.kernel.org/r/20250109224756.3632025-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add support for DMA engine and audio codec on F1C100s
and enable audio codec on Lichee Pi Nano
- Add syscon and SRAM nodes for A100
- Enable CPU DVFS for Tanix TX1
- Explicitly configure TCON0 pixel clock parent according to display
output used
This includes one commit shared with the clock tree
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
which adds the macros for the TCON0 pixel clock parents.
-----BEGIN PGP SIGNATURE-----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=+zy6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zhiA
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.14
- Add support for DMA engine and audio codec on F1C100s
and enable audio codec on Lichee Pi Nano
- Add syscon and SRAM nodes for A100
- Enable CPU DVFS for Tanix TX1
- Explicitly configure TCON0 pixel clock parent according to display
output used
This includes one commit shared with the clock tree
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
which adds the macros for the TCON0 pixel clock parents.
* tag 'sunxi-dt-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: explicitly assign clock parent for TCON0
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
arm64: dts: allwinner: h313: enable DVFS for Tanix TX1
arm64: dts: allwinner: a100: Add syscon nodes
dt-bindings: sram: sunxi-sram: Add A100 compatible
ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano
ARM: dts: suniv: f1c100s: Add support for Audio Codec
ARM: dts: suniv: f1c100s: Add support for DMA
Link: https://lore.kernel.org/r/Z36h2FwUxro8rouO@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds a few cleanups, enhances support for upstreamed SoCs
and machines, other than adding new ones.
In particular, fixes and improvements:
- MT8516 gets a few fixes for GICv2, Watchdog and I2C, and
support for the Keypad controller;
- MT8390 Genio 700 board gets basic audio support;
- MT8365 gets an alias for its integrated ethernet controller;
- MT8195 gets an important fix for system suspend: all of the
machines based on this SoC and its IoT variant can now
properly perform PM Suspend to RAM;
- MT8188 gets support for its Mali GPU with DVFS and a fix for
the OVL Hardware found in the Display Controller using the
right compatible strings;
- MT8186 Chromebooks can now suspend properly thanks to a fix
moving the USB wakeups from XHCI to MTU3 (USB) controller;
- MT8183 Chromebooks get a fix for their DMIC microphone and
proper support for their second-source touchscreen;
- MT7988 SoC and the BananaPi R4 board gets support for Pinctrl,
eMMC/SD, Thermal, CPU DVFS, PCI-Express, and peripherals like
the RT5190A PMIC, PCA9545 I2C mux, and others;
- MT7986 BananaPi R3 board gets support for SATA power socket;
And cleanups:
- Dropped regulator-compatible property from MediaTek DTs;
- Aligned thermal node names with bindings on MT8183 Kukui;
- MT6397 PMIC get proper sub-node names, fixing dt validation;
- The property enabling Wake-On-Lan feature changed in all of
the boards and driver to match the actual meaning of it
(mediatek,mac-wol now enables wol on mac instead of phy);
- Compatibles for MediaTek PMIC Keypad are added to bindings
and can now pass dts validation;
...and the newly added machines are:
- MT8188 (Ciri) Lenovo Chromebook Duet
- MT8186 (Starmie) ASUS Chromebook Enterprise CM30
- MT8186 (Chinchou) ASUS Chromebook CZ12 and CZ12 Flip
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZ35MmigcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4JE4A/3Bj
3aajf1GuDl8oxKuTGmx4k8ih3QpfwkhFE/R6FOvzAQDzsZBOHqJtXSuaRCWxvpR9
ezFHytWtk3w2NJuRjK8vDw==
=HRtU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=YYJ2
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts64-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.14
This adds a few cleanups, enhances support for upstreamed SoCs
and machines, other than adding new ones.
In particular, fixes and improvements:
- MT8516 gets a few fixes for GICv2, Watchdog and I2C, and
support for the Keypad controller;
- MT8390 Genio 700 board gets basic audio support;
- MT8365 gets an alias for its integrated ethernet controller;
- MT8195 gets an important fix for system suspend: all of the
machines based on this SoC and its IoT variant can now
properly perform PM Suspend to RAM;
- MT8188 gets support for its Mali GPU with DVFS and a fix for
the OVL Hardware found in the Display Controller using the
right compatible strings;
- MT8186 Chromebooks can now suspend properly thanks to a fix
moving the USB wakeups from XHCI to MTU3 (USB) controller;
- MT8183 Chromebooks get a fix for their DMIC microphone and
proper support for their second-source touchscreen;
- MT7988 SoC and the BananaPi R4 board gets support for Pinctrl,
eMMC/SD, Thermal, CPU DVFS, PCI-Express, and peripherals like
the RT5190A PMIC, PCA9545 I2C mux, and others;
- MT7986 BananaPi R3 board gets support for SATA power socket;
And cleanups:
- Dropped regulator-compatible property from MediaTek DTs;
- Aligned thermal node names with bindings on MT8183 Kukui;
- MT6397 PMIC get proper sub-node names, fixing dt validation;
- The property enabling Wake-On-Lan feature changed in all of
the boards and driver to match the actual meaning of it
(mediatek,mac-wol now enables wol on mac instead of phy);
- Compatibles for MediaTek PMIC Keypad are added to bindings
and can now pass dts validation;
...and the newly added machines are:
- MT8188 (Ciri) Lenovo Chromebook Duet
- MT8186 (Starmie) ASUS Chromebook Enterprise CM30
- MT8186 (Chinchou) ASUS Chromebook CZ12 and CZ12 Flip
* tag 'mtk-dts64-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (71 commits)
arm64: dts: mediatek: mt8516: add keypad node
arm64: dts: mediatek: add per-SoC compatibles for keypad nodes
dt-bindings: mediatek,mt6779-keypad: add more compatibles
arm64: dts: mediatek: mt8365-evk: Set ethernet alias
dts: arm64: mediatek: mt8195: Remove MT8183 compatible for OVL
dts: arm64: mediatek: mt8188: Update OVL compatible from MT8183 to MT8195
dt-bindings: display: mediatek: ovl: Modify rules for MT8195/MT8188
dt-bindings: display: mediatek: ovl: Add compatible strings for MT8188 MDP3
dt-bindings: arm: mediatek: Drop MT8192 Chromebook variants that never shipped
arm64: dts: mediatek: mt8192: Drop Chromebook variants that never shipped
arm64: dts: mediatek: mt7988a-bpi-r4: Add proc-supply for cpus
arm64: dts: mediatek: mt7988a-bpi-r4: Add MediaTek MT6682A/RT5190A PMIC
arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie
arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm
arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4
arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1
arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux
arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers
arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout
arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart
...
Link: https://lore.kernel.org/r/20250108100826.32458-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This update includes:
- power monitor support for the SAM9X75 Curiosity board (using the PAC1934
device)
- fix the VDDSDMMC rail to 3.3V to avoid breaking USB (for SAMA5D27 WLSOM1
EK and SAMA5D29 Curiosity boards)
- partial support for the SAMA7D65 SoC
- cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZ3qRtwAKCRCejrg/N2X7
/QaMAQCTOEeY9AZ7WZ5fPawhHiRWi/uGmxVGPFoUhaRg8Npu1AEA45yPIoJiIUHu
0XdWX02XZyKBwvWVppsKlbwF6fASiw8=
=REnr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=r64K
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.14
This update includes:
- power monitor support for the SAM9X75 Curiosity board (using the PAC1934
device)
- fix the VDDSDMMC rail to 3.3V to avoid breaking USB (for SAMA5D27 WLSOM1
EK and SAMA5D29 Curiosity boards)
- partial support for the SAMA7D65 SoC
- cleanups
* tag 'at91-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sam9x7: Add address/size to spi-controller nodes
ARM: dts: microchip: sam9x60: Add address/size to spi-controller nodes
ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node
ARM: dts: microchip: sama5d29_curiosity: Add no-1-8-v property to sdmmc0 node
ARM: dts: at91: Add sama7d65 pinmux
dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT
dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity
ARM: dts: microchip: sam9x75_curiosity: Add power monitor support
ARM: dts: microchip: sam9x7: Move i2c address/size to dtsi
Link: https://lore.kernel.org/r/20250107081424.758980-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add pin control support for the RZ/G3E SoC and the RZ/G3E SMARC
Carrier-II EVK development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V4H SoC,
- Describe odd C-PHY wiring on the White Hawk CSI/DSI sub-board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ3wB8AAKCRCKwlD9ZEnx
cIvMAQCrRApne6xtA5WnNe5GCDkg/AddJgTImIJ7VvYJdNRi1gEA+2wlAtzO/s+S
UB1i0B7ApeY+SeL/gO7+ntK4if3R1g4=
=/DFi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wfr/
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.14-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.14 (take two)
- Add pin control support for the RZ/G3E SoC and the RZ/G3E SMARC
Carrier-II EVK development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V4H SoC,
- Describe odd C-PHY wiring on the White Hawk CSI/DSI sub-board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.14-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
arm64: dts: renesas: r8a779g0: Add VSPX instances
arm64: dts: renesas: r8a779g0: Add FCPVX instances
arm64: dts: renesas: r9a09g047e57-smarc: Add SCIF pincontrol
arm64: dts: renesas: r9a09g047: Add pincontrol node
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Replace RZG2L macros
dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H
Link: https://lore.kernel.org/r/cover.1736180859.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add compatibles for i.MX8MP based SoM and carrier from ABB
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmd6TFoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7JmAgApQZmi/iEzyy+WcUxDXyKoeP/jL5r
WQrWHDvAIeIrEvqR+eb34MSy1gDrThk0XceegHF3w0wxnutz1isueIV7GwT4RBYs
VDc3tcw3H+A3B86UdRgJ4k75ZavOYcMqy6KMQrdE4nUMcI0tegXFodpvDDiO8fSd
b8kb6hux38zxLrFIljUdfALH3FV8uEZtUIh1iYlBmuLvI8N+uQTpinYnwKXmKrAs
7gwgqIFVOmXyKjTCxdmvYqc8qjA+mOaR9wr0Bm49ceUS2hvptCR3KOPl5tnbc4qu
H8EDrao5axaaACKZn7D8jIBXkpYS9HBoVupOnowkDj8GeqQ6kNIMzkGNEQ==
=O9l8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xX5g
-----END PGP SIGNATURE-----
Merge tag 'imx-bindings-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings change for 6.14:
- Add compatibles for i.MX8MP based SoM and carrier from ABB
* tag 'imx-bindings-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add ABB SoM and carrier
Link: https://lore.kernel.org/r/20250105095139.714590-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains the interconnect changes for the 6.14-rc1 merge
window. It contains one new driver and DT documentation updates for L3
and bandwidth monitors.
Driver changes:
- New driver for the SM8750 platform
- Add DT compatibles for QCS615 BWMON and SM8650 OSM
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=eGKk
-----END PGP SIGNATURE-----
Merge tag 'icc-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Pull interconnect changes from Georgi:
interconnect changes for 6.14
This pull request contains the interconnect changes for the 6.14-rc1 merge
window. It contains one new driver and DT documentation updates for L3
and bandwidth monitors.
Driver changes:
- New driver for the SM8750 platform
- Add DT compatibles for QCS615 BWMON and SM8650 OSM
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
interconnect: qcom: Add interconnect provider driver for SM8750
dt-bindings: interconnect: add interconnect bindings for SM8750
Given timing so late in cycle and that they are all confined to
specific drivers, it is fine for these to go upstream early in the
6.14 cycle.
hid-sensors
- Handle processed attention channel rather than just returning
an error.
adi,ad3552r
- Fix output ranges for ad3541r and ad3542r.
- Clear the reset status flag so that we can pick up any resets
during operation.
adi,ad5791
- Fix a misleading dt binding example where the sense of the
interrupt was reversed.
adi,ad7606
- Fix some hard coded offsets that should be taking the number of
channels on a particular part into account. These were missed
due to some racing changes.
ams,as73211
- Fix an off by one in optimized path for just reading the colour
channels.
bosch,bme680
- Fix type of variable passed as pointer, ensuring it works on
big endian systems and doesn't expose uninitialized data.
-----BEGIN PGP SIGNATURE-----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=J9mF
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.13b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Merge from Jonathan:
IIO: 2nd set of fixes for the 6.13 cycle.
Given timing so late in cycle and that they are all confined to
specific drivers, it is fine for these to go upstream early in the
6.14 cycle.
hid-sensors
- Handle processed attention channel rather than just returning
an error.
adi,ad3552r
- Fix output ranges for ad3541r and ad3542r.
- Clear the reset status flag so that we can pick up any resets
during operation.
adi,ad5791
- Fix a misleading dt binding example where the sense of the
interrupt was reversed.
adi,ad7606
- Fix some hard coded offsets that should be taking the number of
channels on a particular part into account. These were missed
due to some racing changes.
ams,as73211
- Fix an off by one in optimized path for just reading the colour
channels.
bosch,bme680
- Fix type of variable passed as pointer, ensuring it works on
big endian systems and doesn't expose uninitialized data.
* tag 'iio-fixes-for-6.13b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
iio: light: as73211: fix channel handling in only-color triggered buffer
dt-bindings: iio: dac: ad5791: ldac gpio is active low
iio: hid-sensor-prox: Fix invalid read_raw for attention
iio: adc: ad7606: Fix hardcoded offset in the ADC channels
The addition of DT bindings for enabling and tuning spread spectrum
clocking generation is available only for the main PLL of stm32f{4,7}
platforms.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114182021.670435-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The patch converts st,stm32-rcc.txt to the JSON schema, but it does more
than that. The old bindings, in fact, only covered the stm32f{4,7}
platforms and not the stm32h7. Therefore, to avoid patch submission tests
failing, it was necessary to add the corresponding compatible (i. e.
st,stm32h743-rcc) and specify that, in this case, 3 are the clocks instead
of the 2 required for the stm32f{4,7} platforms.
Additionally, the old bindings made no mention of the st,syscfg property,
which is used by both the stm32f{4,7} and the stm32h7 platforms.
The patch also fixes the files referencing to the old st,stm32-rcc.txt.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114182021.670435-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Changes to support DTR with spi-mem.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeGgAIACgkQJNaLcl1U
h9CodQf9Eek9Usqn6GzjYI8MEAv5XfB0TjG/gleATAtc7Zk4R0Vwo4COnx2+5Fo/
03CV8yAt4Z0fjsD5mzWdnoiVNKCumpS+aFlzwVlOMq1KMYMH1AZAjqYeK9nHYpSn
U5lGse0C9DGrv2jb2KNA5yKGHL/ZquRyY4h0+CKG85jGpmpAWqBAcXaqXm02ts2Q
lTlymD0yefnatQ/0MrGj8bZF0q90Y7oTARDwMyh/MKMpPJslYI5AUT2USKT0qZsp
7sp9SpDE6gyoZy3q0sDXrmRKvMLpV5oLVN5amREnnokNeD9FAP8swDbNH48Fbrlm
4zE4CaHWv2mPSrcbBSJRZRNT/+Neqg==
=uA3v
-----END PGP SIGNATURE-----
Merge tag 'spi-mem-dtr-2' into nand/next
spi: Support DTR in spi-mem
Changes to support DTR with spi-mem.
1. Exynos8895: Add UART nodes, PMU (performance) for the M2 cluster and
I2C controllers in the camera block (HSI2C in CAM0-3).
2. Exynos990: Add Power Management Unit (Samsung block), PMU
(performance) for M5 cluster and two clock controllers.
3. ExynosAutov920: Add watchdog and DMA controllers.
4. Google GS101: Minor fixes for phy and USB. Add USB Type-C.
5. Exynos850-e850-96 board: Drop gap in memory layout.
6. New SoC: Exynos9810.
7. New boards, all mobile phones:
- Exynos9810:
Samsung Galaxy S9 (SM-G960F)
- Exynos990:
Samsung Galaxy S20 FE (SM-G780F)
Samsung Galaxy S20 5G (SM-G980F)
-----BEGIN PGP SIGNATURE-----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=Ps/u
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iQYo
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.14
1. Exynos8895: Add UART nodes, PMU (performance) for the M2 cluster and
I2C controllers in the camera block (HSI2C in CAM0-3).
2. Exynos990: Add Power Management Unit (Samsung block), PMU
(performance) for M5 cluster and two clock controllers.
3. ExynosAutov920: Add watchdog and DMA controllers.
4. Google GS101: Minor fixes for phy and USB. Add USB Type-C.
5. Exynos850-e850-96 board: Drop gap in memory layout.
6. New SoC: Exynos9810.
7. New boards, all mobile phones:
- Exynos9810:
Samsung Galaxy S9 (SM-G960F)
- Exynos990:
Samsung Galaxy S20 FE (SM-G780F)
Samsung Galaxy S20 5G (SM-G980F)
* tag 'samsung-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (23 commits)
arm64: dts: exynos8895: Add camera hsi2c nodes
arm64: dts: exynos990: Add clock management unit nodes
arm64: dts: exynos: gs101-oriole: add pd-disable and typec-power-opmode
arm64: dts: exynos: gs101-oriole: enable Maxim max77759 TCPCi
arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
arm64: dts: exynos: Add Exynos9810 SoC support
arm64: dts: exynos850-e850-96: Specify reserved secure memory explicitly
arm64: dts: exynos990: Add a PMU node for the third cluster
arm64: dts: exynosautov920: Add DMA nodes
arm64: dts: exynos8895: Add a PMU node for the second cluster
dt-bindings: clock: samsung: Add Exynos990 SoC CMU bindings
arm64: dts: exynosautov920: add watchdog DT node
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 (x1slte)
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (x1s-common)
dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board
arm64: dts: exynos: gs101: allow stable USB phy Vbus detection
arm64: dts: exynos: gs101: phy region for exynos5-usbdrd is larger
MAINTAINERS: add myself and Tudor as reviewers for Google Tensor SoC
arm64: dts: exynos990: Add pmu and syscon-reboot nodes
...
Link: https://lore.kernel.org/r/20241231131742.134329-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This development cycle again featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, this time including the device
grouping infrastructure, and the advertisement of MLO support to the
wireless core. However the MLO feature is still considered to be
incomplete.
In addition, there was the usual set of bug fixes and cleanups, mostly
in ath12k, but also in ath9k.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCZ4bgBAAKCRAsFbugiYzL
eyZoAQDoItj55hlA93r/BuzUc7/lCUztH/IOQBWitMrA9ZQ+8AEAxVVUctcRk0kC
VxVtQIg1OQONeftlfXAt6wAsGOtmOA8=
=Ve3o
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20250114' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.14
This development cycle again featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, this time including the device
grouping infrastructure, and the advertisement of MLO support to the
wireless core. However the MLO feature is still considered to be
incomplete.
In addition, there was the usual set of bug fixes and cleanups, mostly
in ath12k, but also in ath9k.