Commit graph

3,837 commits

Author SHA1 Message Date
Vladimir Oltean
ffcbfb5f97 net: phylink: improve phylink_sfp_config_phy() error message with missing PHY driver
It seems that phylink does not support driving PHYs in SFP modules using
the Generic PHY or Generic Clause 45 PHY driver. I've come to this
conclusion after analyzing these facts:

- sfp_sm_probe_phy(), who is our caller here, first calls
  phy_device_register() and then sfp_add_phy() -> ... ->
  phylink_sfp_connect_phy().

- phydev->supported is populated by phy_probe()

- phy_probe() is usually called synchronously from phy_device_register()
  via phy_bus_match(), if a precise device driver is found for the PHY.
  In that case, phydev->supported has a good chance of being set to a
  non-zero mask.

- There is an exceptional case for the PHYs for which phy_bus_match()
  didn't find a driver. Those devices sit for a while without a driver,
  then phy_attach_direct() force-binds the genphy_c45_driver or
  genphy_driver to them. Again, this triggers phy_probe() and renders
  a good chance of phydev->supported being populated, assuming
  compatibility with genphy_read_abilities() or
  genphy_c45_pma_read_abilities().

- phylink_sfp_config_phy() does not support the exceptional case of
  retrieving phydev->supported from the Generic PHY driver, due to its
  code flow. It expects the phydev->supported mask to already be
  non-empty, because it first calls phylink_validate() on it, and only
  calls phylink_attach_phy() if that succeeds. Thus, phylink_attach_phy()
  -> phy_attach_direct() has no chance of running.

It is not my wish to change the state of affairs by altering the code
flow, but merely to document the limitation rather than have the current
unspecific error:

[   61.800079] mv88e6085 d0032004.mdio-mii:12 sfp: validation with support 00,00000000,00000000,00000000 failed: -EINVAL
[   61.820743] sfp sfp: sfp_add_phy failed: -EINVAL

On the premise that an empty phydev->supported is going to make
phylink_validate() fail anyway, and that this is caused by a missing PHY
driver, it would be more informative to single out that case, undercut
the entire phylink_sfp_config_phy() call, including phylink_validate(),
and print a more specific message for this common gotcha:

[   37.076403] mv88e6085 d0032004.mdio-mii:12 sfp: PHY i2c:sfp:16 (id 0x01410cc2) has no driver loaded
[   37.089157] mv88e6085 d0032004.mdio-mii:12 sfp: Drivers which handle known common cases: CONFIG_BCM84881_PHY, CONFIG_MARVELL_PHY
[   37.108047] sfp sfp: sfp_add_phy failed: -EINVAL

Link: https://lore.kernel.org/netdev/20241113144229.3ff4bgsalvj7spb7@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20241212140834.278894-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15 13:47:21 -08:00
Dimitri Fedrau
53e3b54095 net: phy: dp83822: Add support for GPIO2 clock output
The GPIO2 pin on the DP83822 can be configured as clock output. Add support
for configuration via DT.

Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-15 21:12:37 +00:00
Dimitri Fedrau
4eb0308d78 net: phy: dp83822: Replace DP83822_DEVADDR with MDIO_MMD_VEND2
Instead of using DP83822_DEVADDR which is locally defined use
MDIO_MMD_VEND2.

Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241209-dp83822-mdio-mmd-vend2-v1-1-4473c7284b94@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10 18:28:32 -08:00
Russell King (Oracle)
f899c594e1 net: phy: update phy_ethtool_get_eee() documentation
Update the phy_ethtool_get_eee() documentation to make it clear that
all members of struct ethtool_keee are written by this function.

keee.supported, keee.advertised, keee.lp_advertised and keee.eee_active
are all written by genphy_c45_ethtool_get_eee().

keee.tx_lpi_timer, keee.tx_lpi_enabled and keee.eee_enabled are all
written by eeecfg_to_eee().

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tJ9JH-006LIz-SO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-06 17:47:32 -08:00
Russell King (Oracle)
8f1c716090 net: phy: remove genphy_c45_eee_is_active()'s is_enabled arg
All callers to genphy_c45_eee_is_active() now pass NULL as the
is_enabled argument, which means we never use the value computed
in this function. Remove the argument and clean up this function.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/E1tJ9JC-006LIt-Ne@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-06 17:47:31 -08:00
Russell King (Oracle)
92f7acb825 net: phy: avoid genphy_c45_ethtool_get_eee() setting eee_enabled
genphy_c45_ethtool_get_eee() is only called from phy_ethtool_get_eee(),
which then calls eeecfg_to_eee(). eeecfg_to_eee() will overwrite
keee.eee_enabled, so there's no point setting keee.eee_enabled in
genphy_c45_ethtool_get_eee(). Remove this assignment.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/E1tJ9J7-006LIn-Jr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-06 17:47:31 -08:00
Russell King (Oracle)
bac3d0f21c net: phy: marvell: use phydev->eee_cfg.eee_enabled
Rather than calling genphy_c45_ethtool_get_eee() to retrieve whether
EEE is enabled, use the value stored in the phy_device eee_cfg
structure.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/E1tJ9J2-006LIh-Fl@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-06 17:47:31 -08:00
Jakub Kicinski
302cc446cb Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.13-rc2).

No conflicts or adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-05 11:50:14 -08:00
Russell King (Oracle)
77ac9a8b25 net: phylink: remove phylink_phy_no_inband()
Remove phylink_phy_no_inband() now that we are handling the lack of
inband negotiation by querying the capabilities of the PHY and PCS,
and the BCM84881 PHY driver provides us the information necessary to
make the decision.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUsO-006IUt-KN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04 19:19:08 -08:00
Russell King (Oracle)
5fd0f1a02e net: phylink: add negotiation of in-band capabilities
Support for in-band signalling with Serdes links is uncertain. Some
PHYs do not support in-band for e.g. SGMII. Some PCS do not support
in-band for 2500Base-X. Some PCS require in-band for Base-X protocols.

Simply using what is in DT is insufficient when we have hot-pluggable
PHYs e.g. in the form of SFP modules, which may not provide the
in-band signalling.

In order to address this, we have introduced phy_inband_caps() and
pcs_inband_caps() functions to allow phylink to retrieve the
capabilities from each end of the PCS/PHY link. This commit adds code
to resolve whether in-band will be used in the various scenarios that
we have: In-band not being used, PHY present using SGMII or Base-X,
PHY not present. We also deal with no capabilties provided.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUsJ-006IUn-H3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04 19:19:08 -08:00
Russell King (Oracle)
df874f9e52 net: phylink: add pcs_inband_caps() method
Add a pcs_inband_caps() method to query the PCS for its inband link
capabilities, and use this to determine whether link modes used with
optical SFPs can be supported.

When a PCS does not provide a method, we allow inband negotiation to
be either on or off, making this a no-op until the pcs_inband_caps()
method is implemented by a PCS driver.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUs4-006IUU-7K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04 19:19:07 -08:00
Russell King (Oracle)
a219912e0f net: phy: marvell: implement config_inband() method
Implement the config_inband() method for Marvell 88E1112, 88E1111,
and Finisar's 88E1111 variant.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrz-006IUO-3r@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04 19:19:07 -08:00
Russell King (Oracle)
5d58a890c0 net: phy: add phy_config_inband()
Add a method to configure the PHY's in-band mode.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUru-006IUI-08@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04 19:19:07 -08:00
Russell King (Oracle)
1c86828dff net: phy: marvell: implement phy_inband_caps() method
Provide an implementation for phy_inband_caps() for Marvell PHYs used
on SFP modules, so that phylink knows the PHYs capabilities.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUro-006IUC-Rq@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04 19:19:07 -08:00
Russell King (Oracle)
c64c7fa0a7 net: phy: bcm84881: implement phy_inband_caps() method
BCM84881 has no support for inband signalling, so this is a trivial
implementation that returns no support for inband.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/E1tIUrj-006IU6-ON@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04 19:19:07 -08:00
Russell King (Oracle)
b4c7698dd9 net: phy: add phy_inband_caps()
Add a method to query the PHY's in-band capabilities for a PHY
interface mode.

Where the interface mode does not have in-band capability, or the PHY
driver has not been updated to return this information, then
phy_inband_caps() should return zero. Otherwise, PHY drivers will
return a value consisting of the following flags:

LINK_INBAND_DISABLE indicates that the hardware does not support
in-band signalling, or can have in-band signalling configured via
software to be disabled.

LINK_INBAND_ENABLE indicates that the hardware will use in-band
signalling, or can have in-band signalling configured via software
to be enabled.

LINK_INBAND_BYPASS indicates that the hardware has the ability to
bypass in-band signalling when enabled after a timeout if the link
partner does not respond to its in-band signalling.

This reports the PHY capabilities for the particular interface mode,
not the current configuration.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUre-006ITz-KF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04 19:19:06 -08:00
Russell King (Oracle)
4e7d000286 net: phylink: add debug for phylink_major_config()
Now that we have a more complexity in phylink_major_config(), augment
the debugging so we can see what's going on there.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrZ-006ITt-Fa@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04 19:19:06 -08:00
Russell King (Oracle)
1f92ead7e1 net: phylink: split cur_link_an_mode into requested and active
There is an interdependence between the current link_an_mode and
pcs_neg_mode that some drivers rely upon to know whether inband or PHY
mode will be used.

In order to support detection of PCS and PHY inband capabilities
resulting in automatic selection of inband or PHY mode, we need to
cater for this, and support changing the MAC link_an_mode. However, we
end up with an inter-dependency between the current link_an_mode and
pcs_neg_mode.

To solve this, split the current link_an_mode into the requested
link_an_mode and active link_an_mode. The requested link_an_mode will
always be passed to phylink_pcs_neg_mode(), and the active link_an_mode
will be used for everything else, and only updated during
phylink_major_config(). This will ensure that phylink_pcs_neg_mode()'s
link_an_mode will not depend on the active link_an_mode that will,
in a future patch, depend on pcs_neg_mode.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrU-006ITn-Ai@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04 19:19:06 -08:00
Russell King (Oracle)
17ed1911f9 net: phylink: pass phylink and pcs into phylink_pcs_neg_mode()
Move the call to phylink_pcs_neg_mode() in phylink_major_config() after
we have selected the appropriate PCS to allow the PCS to be passed in.

Add struct phylink and struct phylink_pcs pointers to
phylink_pcs_neg_mode() and pass in the appropriate structures. Set
pl->pcs_neg_mode before returning, and remove the return value.

This will allow the capabilities of the PCS and any PHY to be used when
deciding which pcs_neg_mode should be used.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrP-006ITh-6u@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04 19:19:06 -08:00
Oleksij Rempel
ccb989e4d1 net: phy: microchip: Reset LAN88xx PHY to ensure clean link state on LAN7800/7850
Fix outdated MII_LPA data in the LAN88xx PHY, which is used in LAN7800
and LAN7850 USB Ethernet controllers. Due to a hardware limitation, the
PHY cannot reliably update link status after parallel detection when the
link partner does not support auto-negotiation. To mitigate this, add a
PHY reset in `lan88xx_link_change_notify()` when `phydev->state` is
`PHY_NOLINK`, ensuring the PHY starts in a clean state and reports
accurate fixed link parallel detection results.

Fixes: 792aec47d5 ("add microchip LAN88xx phy driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241125084050.414352-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-02 18:56:41 -08:00
Russell King (Oracle)
e2668c34b7 net: phy: fix phy_ethtool_set_eee() incorrectly enabling LPI
When phy_ethtool_set_eee_noneg() detects a change in the LPI
parameters, it attempts to update phylib state and trigger the link
to cycle so the MAC sees the updated parameters.

However, in doing so, it sets phydev->enable_tx_lpi depending on
whether the EEE configuration allows the MAC to generate LPI without
taking into account the result of negotiation.

This can be demonstrated with a 1000base-T FD interface by:

 # ethtool --set-eee eno0 advertise 8   # cause EEE to be not negotiated
 # ethtool --set-eee eno0 tx-lpi off
 # ethtool --set-eee eno0 tx-lpi on

This results in being true, despite EEE not having been negotiated and:
 # ethtool --show-eee eno0
	EEE status: enabled - inactive
	Tx LPI: 250 (us)
	Supported EEE link modes:  100baseT/Full
	                           1000baseT/Full
	Advertised EEE link modes:  100baseT/Full
	                                         1000baseT/Full

Fix this by keeping track of whether EEE was negotiated via a new
eee_active member in struct phy_device, and include this state in
the decision whether phydev->enable_tx_lpi should be set.

Fixes: 3e43b903da ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tErSe-005RhB-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-28 09:26:13 +01:00
Heiner Kallweit
f26a29a038 net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled
This is a follow-up to 41ffcd9501 ("net: phy: fix phylib's dual
eee_enabled") and resolves an issue with genphy_c45_an_config_eee_aneg()
(called from genphy_c45_ethtool_set_eee) not seeing the new value of
phydev->eee_cfg.eee_enabled.

Fixes: 49168d1980 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-24 14:49:41 +00:00
Paolo Abeni
dd7207838d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes to prepare for the 6.13 net-next PR.

Conflicts:

include/linux/phy.h
  41ffcd9501 net: phy: fix phylib's dual eee_enabled
  721aa69e70 net: phy: convert eee_broken_modes to a linkmode bitmap
https://lore.kernel.org/all/20241118135512.1039208b@canb.auug.org.au/

drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
  2160428bcb net: txgbe: fix null pointer to pcs
  2160428bcb net: txgbe: remove GPIO interrupt controller

Adjacent commits:

include/linux/phy.h
  41ffcd9501 net: phy: fix phylib's dual eee_enabled
  516a5f11eb net: phy: respect cached advertising when re-enabling EEE

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-19 13:56:02 +01:00
Tarun Alle
025b2bbc5a net: phy: microchip_t1: Clause-45 PHY loopback support for LAN887x
Adds support for clause-45 PHY loopback for the Microchip LAN887x driver.

Signed-off-by: Tarun Alle <Tarun.Alle@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241114101951.382996-1-Tarun.Alle@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15 15:22:10 -08:00
Russell King (Oracle)
41ffcd9501 net: phy: fix phylib's dual eee_enabled
phylib has two eee_enabled members. Some parts of the code are using
phydev->eee_enabled, other parts are using phydev->eee_cfg.eee_enabled.
This leads to incorrect behaviour as their state goes out of sync.
ethtool --show-eee shows incorrect information, and --set-eee sometimes
doesn't take effect.

Fix this by only having one eee_enabled member - that in eee_cfg.

Fixes: 49168d1980 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/E1tBXAF-00341F-EQ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15 14:27:37 -08:00
Romain Gantois
378e8feea9 net: phy: dp83869: fix status reporting for 1000base-x autonegotiation
The DP83869 PHY transceiver supports converting from RGMII to 1000base-x.
In this operation mode, autonegotiation can be performed, as described in
IEEE802.3.

The DP83869 has a set of fiber-specific registers located at offset 0xc00.
When the transceiver is configured in RGMII-to-1000base-x mode, these
registers are mapped onto offset 0, which should make reading the
autonegotiation status transparent.

However, the fiber registers at offset 0xc04 and 0xc05 follow the bit
layout specified in Clause 37, and genphy_read_status() assumes a Clause 22
layout. Thus, genphy_read_status() doesn't properly read the capabilities
advertised by the link partner, resulting in incorrect link parameters.

Similarly, genphy_config_aneg() doesn't properly write advertised
capabilities.

Fix the 1000base-x autonegotiation procedure by replacing
genphy_read_status() and genphy_config_aneg() with their Clause 37
equivalents.

Fixes: a29de52ba2 ("net: dp83869: Add ability to advertise Fiber connection")
Cc: stable@vger.kernel.org
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://patch.msgid.link/20241112-dp83869-1000base-x-v3-1-36005f4ab0d9@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14 19:11:03 -08:00
Heiner Kallweit
721aa69e70 net: phy: convert eee_broken_modes to a linkmode bitmap
eee_broken_modes has a eee_cap1 register layout currently. This doen't
allow to flag e.g. 2.5Gbps or 5Gbps BaseT EEE as broken. To overcome
this limitation switch eee_broken_modes to a linkmode bitmap.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/dfe0c9ff-84b0-4328-86d7-e917ebc084a1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14 18:01:37 -08:00
Jakub Kicinski
a79993b5fc Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.12-rc8).

Conflicts:

tools/testing/selftests/net/.gitignore
  252e01e682 ("selftests: net: add netlink-dumps to .gitignore")
  be43a6b238 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw")
https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/

drivers/net/phy/phylink.c
  671154f174 ("net: phylink: ensure PHY momentary link-fails are handled")
  7530ea26c8 ("net: phylink: remove "using_mac_select_pcs"")

Adjacent changes:

drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
  5b366eae71 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
  e96321fad3 ("net: ethernet: Switch back to struct platform_driver::remove()")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14 11:29:15 -08:00
Russell King (Oracle)
671154f174 net: phylink: ensure PHY momentary link-fails are handled
Normally, phylib won't notify changes in quick succession. However, as
a result of commit 3e43b903da ("net: phy: Immediately call
adjust_link if only tx_lpi_enabled changes") this is no longer true -
it is now possible that phy_link_down() and phy_link_up() will both
complete before phylink's resolver has run, which means it'll miss that
pl->phy_state.link momentarily became false.

Rename "mac_link_dropped" to be more generic "link_failed" since it will
cover more than the MAC/PCS end of the link failing, and arrange to set
this in phylink_phy_change() if we notice that the PHY reports that the
link is down.

This will ensure that we capture an EEE reconfiguration event.

Fixes: 3e43b903da ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/E1tAtcW-002RBS-LB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13 18:52:54 -08:00
Heiner Kallweit
3bf8163a36 net: phy: c45: don't use temporary linkmode bitmaps in genphy_c45_ethtool_get_eee
genphy_c45_eee_is_active() populates both bitmaps only if it returns
successfully. So we can avoid the overhead of the temporary bitmaps.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/b0832102-28ab-4223-b879-91fb1fc11278@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13 18:50:11 -08:00
SkyLake.Huang
219cecbb3e net: phy: mediatek: add MT7530 & MT7531's PHY ID macros
This patch adds MT7530 & MT7531's PHY ID macros in mtk-ge.c so that
it follows the same rule of mtk-ge-soc.c.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13 13:06:04 +00:00
SkyLake.Huang
3cb1a3c9cb net: phy: mediatek: Integrate read/write page helper functions
This patch integrates read/write page helper functions as MTK phy lib.
They are basically the same in mtk-ge.c & mtk-ge-soc.c.

Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13 13:06:04 +00:00
SkyLake.Huang
477c200aa7 net: phy: mediatek: Improve readability of mtk-phy-lib.c's mtk_phy_led_hw_ctrl_set()
This patch removes parens around TRIGGER_NETDEV_RX/TRIGGER_NETDEV_TX in
mtk_phy_led_hw_ctrl_set(), which improves readability.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13 13:06:04 +00:00
SkyLake.Huang
7f9c320c98 net: phy: mediatek: Move LED helper functions into mtk phy lib
This patch creates mtk-phy-lib.c & mtk-phy.h and integrates mtk-ge-soc.c's
LED helper functions so that we can use those helper functions in other
MTK's ethernet phy driver.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13 13:06:04 +00:00
SkyLake.Huang
4c452f7ea8 net: phy: mediatek: Re-organize MediaTek ethernet phy drivers
Re-organize MediaTek ethernet phy driver files and get ready to integrate
some common functions and add new 2.5G phy driver.
mtk-ge.c: MT7530 Gphy on MT7621 & MT7531 Gphy
mtk-ge-soc.c: Built-in Gphy on MT7981 & Built-in switch Gphy on MT7988
mtk-2p5ge.c: Planned for built-in 2.5G phy on MT7988

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13 13:06:04 +00:00
Russell King (Oracle)
bc08ce37d9 net: phylink: clean up phylink_resolve()
Now that we have reduced the indentation level, clean up the code
formatting.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t9RQz-002Ff5-EA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11 19:05:14 -08:00
Russell King (Oracle)
d1a16dbbd8 net: phylink: remove switch() statement in resolve handling
The switch() statement doesn't sit very well with the preceeding if()
statements, so let's just convert everything to if()s. As a result of
the two preceding commits, there is now only one case in the switch()
statement. Remove the switch statement and reduce the code indentation.
Code reformatting will be in the following commit.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t9RQu-002Fez-AA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11 19:05:14 -08:00
Russell King (Oracle)
f0f46c2a3d net: phylink: move MLO_AN_PHY resolve handling to if() statement
The switch() statement doesn't sit very well with the preceeding if()
statements, and results in excessive indentation that spoils code
readability. Continue cleaning this up by converting the MLO_AN_PHY
case to use an if() statmeent.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t9RQp-002Fet-5W@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11 19:05:14 -08:00
Russell King (Oracle)
92abfcb4ce net: phylink: move MLO_AN_FIXED resolve handling to if() statement
The switch() statement doesn't sit very well with the preceeding if()
statements, and results in excessive indentation that spoils code
readability. Begin cleaning this up by converting the MLO_AN_FIXED case
to an if() statement.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t9RQk-002Fen-1A@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11 19:05:13 -08:00
Russell King (Oracle)
8cc5f4cb94 net: phylink: move manual flow control setting
Move the handling of manual flow control configuration to a common
location during resolve. We currently evaluate this for all but
fixed links.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t9RQe-002Feh-T1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11 19:05:13 -08:00
Paul Davey
bc3d60bd4c net: phy: aquantia: Add mdix config and reporting
Add support for configuring MDI-X state of PHY.
Add reporting of resolved MDI-X state in status information.

Tested on AQR113C.

Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Link: https://patch.msgid.link/20241106222057.3965379-1-paul.davey@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11 16:43:29 -08:00
Heiner Kallweit
db73835f54 net: phy: remove genphy_config_eee_advert
bcm_config_lre_aneg() doesn't use genphy_config_eee_advert() any longer.
As this was the only user, we can remove genphy_config_eee_advert() now.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/37da7f3e-b883-4c07-9881-b8c0516822b7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07 20:31:06 -08:00
Heiner Kallweit
3cc97d2fa9 net: phy: broadcom: use genphy_c45_an_config_eee_aneg in bcm_config_lre_aneg
bcm_config_lre_aneg() is the only user of genphy_config_eee_advert(),
therefore use genphy_c45_an_config_eee_aneg() instead. The resulting
functionality is equivalent, and bcm_config_lre_aneg() follows the
structure of __genphy_config_aneg().
In a follow-up step genphy_config_eee_advert() can be removed.

Note: We preserve the current behavior to ignore errors.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/6e5cd4ab-28bb-4d82-b449-fec85f3d1e8a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07 20:31:06 -08:00
Heiner Kallweit
bcfb95c989 net: phy: export genphy_c45_an_config_eee_aneg
We'll use this function in bcm_config_lre_aneg(), therefore export it.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/02bd7c39-7413-4433-bafc-a276089bd292@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07 20:31:06 -08:00
Heiner Kallweit
9c477088b6 net: phy: make genphy_c45_write_eee_adv() static
genphy_c45_write_eee_adv() isn't used outside phy-c45.c,
so make it static.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/d23bd784-44e6-4a15-af3a-b37379156521@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07 20:31:06 -08:00
Jakub Kicinski
2696e451df Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.12-rc7).

Conflicts:

drivers/net/ethernet/freescale/enetc/enetc_pf.c
  e15c5506dd ("net: enetc: allocate vf_state during PF probes")
  3774409fd4 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au

Adjacent changes:

drivers/net/ethernet/ti/am65-cpsw-nuss.c
  de794169cf ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7")
  4a7b2ba94a ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07 13:44:16 -08:00
Rosen Penev
fda960354e net: broadcom: use ethtool string helpers
The latter is the preferred way to copy ethtool strings.

Avoids manually incrementing the pointer. Cleans up the code quite well.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20241104205317.306140-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-06 17:51:02 -08:00
Heiner Kallweit
516a5f11eb net: phy: respect cached advertising when re-enabling EEE
If we remove modes from EEE advertisement and disable / re-enable EEE,
then advertisement is set to all supported modes. I don't think this is
what the user expects. So respect the cached advertisement and just fall
back to all supported modes if cached advertisement is empty.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/c75f7f8b-5571-429f-abd3-ce682d178a4b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-06 17:33:10 -08:00
Diogo Silva
256748d548 net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
DP83848	datasheet (section 4.7.2) indicates that the reset pin should be
toggled after the clocks are running. Add the PHY_RST_AFTER_CLK_EN to
make sure that this indication is respected.

In my experience not having this flag enabled would lead to, on some
boots, the wrong MII mode being selected if the PHY was initialized on
the bootloader and was receiving data during Linux boot.

Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 34e45ad937 ("net: phy: dp83848: Add TI DP83848 Ethernet PHY")
Link: https://patch.msgid.link/20241102151504.811306-1-paissilva@ld-100007.ds1.internal
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-05 17:46:03 -08:00
Rosen Penev
1441df3a37 net: phy: use ethtool string helpers
These are the preferred way to copy ethtool strings.

Avoids incrementing pointers all over the place.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20241029234641.11448-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-03 11:07:46 -08:00