Commit graph

25,255 commits

Author SHA1 Message Date
Anuj Gupta
18623503a3 scsi: add support for user-meta interface
Add support for sending user-meta buffer. Set tags to be checked
using flags specified by user/block-layer.
With this change, BIP_CTRL_NOCHECK becomes unused. Remove it.

Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241128112240.8867-10-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-12-23 08:17:17 -07:00
Andrew Donnellan
f117051514 scsi/cxlflash: Deprecate driver
We intend to remove the cxlflash driver in an upcoming release. It is
already marked as Obsolete in MAINTAINERS.

The cxlflash driver has received minimal maintenance for some time, and
the CAPI Flash hardware that uses it is no longer commercially available.

Add a warning message on probe and change Kconfig to label the driver as
deprecated and not build the driver by default.

Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241210054055.144813-3-ajd@linux.ibm.com
2024-12-13 09:15:29 +05:30
Christophe JAILLET
c9a71ca13f scsi: Constify struct pci_device_id
'struct pci_device_id' is not modified in these drivers.

Constifying this structure moves some data to a read-only section, so
increase overall security.

On a x86_64, with allmodconfig, as an example:
Before:
======
   text	   data	    bss	    dec	    hex	filename
  70237	   9137	    320	  79694	  1374e	drivers/scsi/3w-9xxx.o

After:
=====
   text	   data	    bss	    dec	    hex	filename
  70461	   8913	    320	  79694	  1374e	drivers/scsi/3w-9xxx.o

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/fc61b1946488c1ea8f7a17a06cf40fbd05dcc6de.1733590049.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-09 21:59:52 -05:00
Michael Kelley
6cb7063feb scsi: storvsc: Don't assume cpu_possible_mask is dense
Current code allocates the stor_chns array with size num_possible_cpus().
This code assumes cpu_possible_mask is dense, which is not true in the
general case per [1]. If cpu_possible_mask is sparse, the array might be
indexed by a value beyond the size of the array.

However, the configurations that Hyper-V provides to guest VMs on x86 and
ARM64 hardware, in combination with how architecture specific code assigns
Linux CPU numbers, *does* always produce a dense cpu_possible_mask.  So the
dense assumption is not currently causing failures. But for robustness
against future changes in how cpu_possible_mask is populated, update the
code to no longer assume dense.

The correct approach is to allocate and initialize the array using size
"nr_cpu_ids". While this leaves unused array entries corresponding to holes
in cpu_possible_mask, the holes are assumed to be minimal and hence the
amount of memory wasted by unused entries is minimal.

[1] https://lore.kernel.org/lkml/SN6PR02MB4157210CC36B2593F8572E5ED4692@SN6PR02MB4157.namprd02.prod.outlook.com/

Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20241003035333.49261-5-mhklinux@outlook.com
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-09 21:57:52 -05:00
Randy Dunlap
c17618cf66 scsi: Eliminate scsi_register() and scsi_unregister() usage & docs
scsi_mid_low_api.rst refers to scsi_register() and scsi_unregister() but
these functions don't exist. They have been replaced by more meaningful
names.

Update one driver (megaraid_mbox.c) that uses "scsi_unregister" in a
warning message. Update scsi_mid_low_api.rst to eliminate references to
scsi_register() and scsi_unregister().

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20241205041839.164404-1-rdunlap@infradead.org
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Cc: megaraidlinux.pdl@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-09 21:53:01 -05:00
Martin K. Petersen
2486e60bdd Merge patch series "Replace the "slave_*" function names"
Bart Van Assche <bvanassche@acm.org> says:

Hi Martin,

The text "slave_" in multiple function names does not make it clear what
the purpose of these functions is. Hence this patch series that renames all
SCSI functions that have the word "slave" in their function name. Please
consider this patch series for the next merge window.

Thanks,

Bart.

Link: https://lore.kernel.org/r/20241022180839.2712439-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 16:54:10 -05:00
Bart Van Assche
0f98212d96 scsi: core: Remove the .slave_configure() method
Now that all SCSI drivers have been converted from .slave_configure() to
.sdev_configure(), remove support for .slave_configure() from the SCSI
core.

Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 15:34:28 -05:00
Bart Van Assche
49515b7fe5 scsi: Convert SCSI drivers to .sdev_configure()
The only difference between the .sdev_configure() and .slave_configure()
methods is that the former accepts an additional 'limits' argument.
Convert all SCSI drivers that define a .slave_configure() method to
.sdev_configure(). This patch prepares for removing the
.slave_configure() method. No functionality has been changed.

Acked-by: Geoff Levand <geoff@infradead.org> # for ps3rom
Acked-by: Khalid Aziz <khalid@gonehiking.org> # for the BusLogic driver
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 15:34:28 -05:00
Bart Van Assche
47c2e30afc scsi: Rename .device_configure() into .sdev_configure()
Improve naming consistency with the .sdev_prep() and .sdev_destroy()
methods by renaming .device_configure() into .sdev_configure().

Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 15:34:28 -05:00
Bart Van Assche
ed638918f4 scsi: Rename .slave_alloc() and .slave_destroy()
Rename .slave_alloc() into .sdev_init() and .slave_destroy() into
.sdev_destroy(). The new names make it clear that these are actions on
SCSI devices. Make this change in the SCSI core, SCSI drivers and also
in the ATA drivers. No functionality has been changed.

This patch has been created as follows:
* Change the text "slave_alloc" into "sdev_init" in all source files
  except those in drivers/net/ and Documentation/.
* Change the text "slave_destroy" into "sdev_destroy" in all source
  files except those in drivers/net/ and Documentation/.
* Rename lpfc_no_slave() into lpfc_no_sdev().
* Manually adjust whitespace where necessary to restore vertical
  alignment (dc395x driver and include/linux/libata.h).

Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 15:34:28 -05:00
Vishakha Channapattan
5efff64c6b scsi: pm80xx: Improve debugging for aborted commands
Improves the debugging capabilities of the driver by adding more context to
debug messages:

 1. Introduce a new function to show pending commands.

 2. Include the tag number in NCQ EH path debug messages.

 3. Add logging for ata_tag along with pm80xx tag to map I/Os aborted with
    ATA logs.

Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20241126225546.975441-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 14:50:50 -05:00
Igor Pylypiv
b64004dbcd scsi: pm80xx: Increase reserved tags from 8 to 128
Increase the number of reserved tags to prevent command processing failures
when the driver is under stress. 8 reserved tags are quickly getting all
used up leading to errors when command completions are delayed.

The driver needs ~512 ccbs/tags for maximum I/O utilization:

  16 (max disks) * 32 (max SATA queue depth) = ~512 ccbs/tags.

By reserving 128 tags the driver will still have plenty of tags/ccbs left:

  1024 (max ccbs) - 128 (reserved slot) = 896 tags/ccbs left.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20241126224923.973528-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 14:46:58 -05:00
Jolly Shah
4c567a9d0e scsi: pm80xx: Use dynamic tag numbers for PHY start and stop
Other commands were not aware if tag 0x01 was in use or not which meant
multiple commands could share the same tag number.

Prevent tag 0x01 from being used by multiple commands at the same time.

Signed-off-by: Jolly Shah <jollys@google.com>
Signed-off-by: Terrence Adams <tadamsjr@google.com>
Link: https://lore.kernel.org/r/20241125213343.3272478-1-tadamsjr@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 14:45:14 -05:00
Igor Pylypiv
0f630c58e3 scsi: pm80xx: Do not use libsas port ID
libsas port IDs can differ from the controller's port IDs.  Using libsas
port ID to index pm8001_ha->port array is a bug.

Remove sas_find_local_port_id(). We can use pm8001_ha->phy[phy_id].port to
get the port ID.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Terrence Adams <tadamsjr@google.com>
Link: https://lore.kernel.org/r/20241121194915.3039073-1-tadamsjr@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 14:43:48 -05:00
John Garry
6918141d81 scsi: scsi_debug: Fix hrtimer support for ndelay
Since commit 771f712ba5 ("scsi: scsi_debug: Fix cmd duration
calculation"), ns_from_boot value is only evaluated in schedule_resp()
for polled requests.

However, ns_from_boot is also required for hrtimer support for when
ndelay is less than INCLUSIVE_TIMING_MAX_NS, so fix up the logic to
decide when to evaluate ns_from_boot.

Fixes: 771f712ba5 ("scsi: scsi_debug: Fix cmd duration calculation")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241202130045.2335194-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 13:22:59 -05:00
Cathy Avery
b1aee7f034 scsi: storvsc: Do not flag MAINTENANCE_IN return of SRB_STATUS_DATA_OVERRUN as an error
This partially reverts commit 812fe6420a ("scsi: storvsc: Handle
additional SRB status values").

HyperV does not support MAINTENANCE_IN resulting in FC passthrough
returning the SRB_STATUS_DATA_OVERRUN value. Now that
SRB_STATUS_DATA_OVERRUN is treated as an error, multipath ALUA paths go
into a faulty state as multipath ALUA submits RTPG commands via
MAINTENANCE_IN.

[    3.215560] hv_storvsc 1d69d403-9692-4460-89f9-a8cbcc0f94f3:
tag#230 cmd 0xa3 status: scsi 0x0 srb 0x12 hv 0xc0000001
[    3.215572] scsi 1:0:0:32: alua: rtpg failed, result 458752

Make MAINTENANCE_IN return success to avoid the error path as is
currently done with INQUIRY and MODE_SENSE.

Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Cathy Avery <cavery@redhat.com>
Link: https://lore.kernel.org/r/20241127181324.3318443-1-cavery@redhat.com
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 13:22:59 -05:00
Suraj Sonawane
f10593ad9b scsi: sg: Fix slab-use-after-free read in sg_release()
Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN:

BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30
kernel/locking/lockdep.c:5838
__mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912
sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407

In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is
called before releasing the open_rel_lock mutex. The kref_put() call may
decrement the reference count of sfp to zero, triggering its cleanup
through sg_remove_sfp(). This cleanup includes scheduling deferred work
via sg_remove_sfp_usercontext(), which ultimately frees sfp.

After kref_put(), sg_release() continues to unlock open_rel_lock and may
reference sfp or sdp. If sfp has already been freed, this results in a
slab-use-after-free error.

Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the
open_rel_lock mutex. This ensures:

 - No references to sfp or sdp occur after the reference count is
   decremented.

 - Cleanup functions such as sg_remove_sfp() and
   sg_remove_sfp_usercontext() can safely execute without impacting the
   mutex handling in sg_release().

The fix has been tested and validated by syzbot. This patch closes the
bug reported at the following syzkaller link and ensures proper
sequencing of resource cleanup and mutex operations, eliminating the
risk of use-after-free errors in sg_release().

Reported-by: syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7efb5850a17ba6ce098b
Tested-by: syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com
Fixes: cc833acbee ("sg: O_EXCL and other lock handling")
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://lore.kernel.org/r/20241120125944.88095-1-surajsonawane0215@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 13:22:59 -05:00
Nilesh Javali
35002a8ec5 scsi: qla2xxx: Update version to 10.02.09.400-k
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 13:22:59 -05:00
Anil Gurumurthy
e4e268f898 scsi: qla2xxx: Supported speed displayed incorrectly for VPorts
The fc_function_template for vports was missing the
.show_host_supported_speeds. The base port had the same.

Add .show_host_supported_speeds to the vport template as well.

Cc: stable@vger.kernel.org
Fixes: 2c3dfe3f6a ("[SCSI] qla2xxx: add support for NPIV")
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 13:22:59 -05:00
Quinn Tran
4812b7796c scsi: qla2xxx: Fix NVMe and NPIV connect issue
NVMe controller fails to send connect command due to failure to locate
hw context buffer for NVMe queue 0 (blk_mq_hw_ctx, hctx_idx=0). The
cause of the issue is NPIV host did not initialize the vha->irq_offset
field.  This field is given to blk-mq (blk_mq_pci_map_queues) to help
locate the beginning of IO Queues which in turn help locate NVMe queue
0.

Initialize this field to allow NVMe to work properly with NPIV host.

 kernel: nvme nvme5: Connect command failed, errno: -18
 kernel: nvme nvme5: qid 0: secure concatenation is not supported
 kernel: nvme nvme5: NVME-FC{5}: create_assoc failed, assoc_id 2e9100 ret 401
 kernel: nvme nvme5: NVME-FC{5}: reset: Reconnect attempt failed (401)
 kernel: nvme nvme5: NVME-FC{5}: Reconnect attempt in 2 seconds

Cc: stable@vger.kernel.org
Fixes: f0783d43dd ("scsi: qla2xxx: Use correct number of vectors for online CPUs")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 13:22:59 -05:00
Saurav Kashyap
833c70e212 scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cnt
Firmware supports multiple sg_cnt for request and response for CT
commands, so remove the redundant check. A check is there where sg_cnt
for request and response should be same. This is not required as driver
and FW have code to handle multiple and different sg_cnt on request and
response.

Cc: stable@vger.kernel.org
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 13:22:59 -05:00
Quinn Tran
841df27d61 scsi: qla2xxx: Move FCE Trace buffer allocation to user control
Currently FCE Tracing is enabled to log additional ELS events. Instead,
user will enable or disable this feature through debugfs.

Modify existing DFS knob to allow user to enable or disable this
feature.

echo [1 | 0] > /sys/kernel/debug/qla2xxx/qla2xxx_??/fce
cat  /sys/kernel/debug/qla2xxx/qla2xxx_??/fce

Cc: stable@vger.kernel.org
Fixes: df613b9607 ("[SCSI] qla2xxx: Add Fibre Channel Event (FCE) tracing support.")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-4-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 13:21:53 -05:00
Prateek Singh Rathore
a9a099575d scsi: csiostor: Fix typo doesnt->doesn't
Signed-off-by: Prateek Singh Rathore <prateek.singh.rathore@gmail.com>
Link: https://lore.kernel.org/r/20241123113038.11188-1-prateek.singh.rathore@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 13:17:52 -05:00
Thorsten Blum
5f8822c4a4 scsi: fnic: Use vcalloc() instead of vmalloc() and memset(0)
Use vcalloc() instead of vmalloc() followed by memset(0) to simplify the
functions fnic_trace_buf_init() and fnic_fc_trace_init().

Compile-tested only.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20241107104300.1252-1-thorsten.blum@linux.dev
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 13:03:27 -05:00
Quinn Tran
07c903db0a scsi: qla2xxx: Fix use after free on unload
System crash is observed with stack trace warning of use after
free. There are 2 signals to tell dpc_thread to terminate (UNLOADING
flag and kthread_stop).

On setting the UNLOADING flag when dpc_thread happens to run at the time
and sees the flag, this causes dpc_thread to exit and clean up
itself. When kthread_stop is called for final cleanup, this causes use
after free.

Remove UNLOADING signal to terminate dpc_thread.  Use the kthread_stop
as the main signal to exit dpc_thread.

[596663.812935] kernel BUG at mm/slub.c:294!
[596663.812950] invalid opcode: 0000 [#1] SMP PTI
[596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G          IOE    --------- -  - 4.18.0-240.el8.x86_64 #1
[596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012
[596663.812974] RIP: 0010:__slab_free+0x17d/0x360

...
[596663.813008] Call Trace:
[596663.813022]  ? __dentry_kill+0x121/0x170
[596663.813030]  ? _cond_resched+0x15/0x30
[596663.813034]  ? _cond_resched+0x15/0x30
[596663.813039]  ? wait_for_completion+0x35/0x190
[596663.813048]  ? try_to_wake_up+0x63/0x540
[596663.813055]  free_task+0x5a/0x60
[596663.813061]  kthread_stop+0xf3/0x100
[596663.813103]  qla2x00_remove_one+0x284/0x440 [qla2xxx]

Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 12:30:13 -05:00
Quinn Tran
c423263082 scsi: qla2xxx: Fix abort in bsg timeout
Current abort of bsg on timeout prematurely clears the
outstanding_cmds[]. Abort does not allow FW to return the IOCB/SRB. In
addition, bsg_job_done() is not called to return the BSG (i.e. leak).

Abort the outstanding bsg/SRB and wait for the completion. The
completion IOCB will wake up the bsg_timeout thread. If abort is not
successful, then driver will forcibly call bsg_job_done() and free the
srb.

Err Inject:

 - qaucli -z
 - assign CT Passthru IOCB's NportHandle with another initiator
   nport handle to trigger timeout.  Remote port will drop CT request.
 - bsg_job_done is properly called as part of cleanup

kernel: qla2xxx [0000:21:00.1]-7012:7: qla2x00_process_ct : 286 : Error Inject.
kernel: qla2xxx [0000:21:00.1]-7016:7: bsg rqst type: FC_BSG_HST_CT else type: 101 - loop-id=1 portid=fffffa.
kernel: qla2xxx [0000:21:00.1]-70bb:7: qla24xx_bsg_timeout CMD timeout. bsg ptr ffff9971a42f0838 msgcode 80000004 vendor cmd fa010000
kernel: qla2xxx [0000:21:00.1]-507c:7: Abort command issued - hdl=4b, type=5
kernel: qla2xxx [0000:21:00.1]-5040:7: ELS-CT pass-through-ct pass-through error hdl=4b comp_status-status=0x5 error subcode 1=0x0 error subcode 2=0xaf882e80.
kernel: qla2xxx [0000:21:00.1]-7009:7: qla2x00_bsg_job_done: sp hdl 4b, result=70000 bsg ptr ffff9971a42f0838
kernel: qla2xxx [0000:21:00.1]-802c:7: Aborting bsg ffff9971a42f0838 sp=ffff99760b87ba80 handle=4b rval=0
kernel: qla2xxx [0000:21:00.1]-708a:7: bsg abort success. bsg ffff9971a42f0838 sp=ffff99760b87ba80 handle=0x4b
kernel: qla2xxx [0000:21:00.1]-7012:7: qla2x00_process_ct : 286 : Error Inject.
kernel: qla2xxx [0000:21:00.1]-7016:7: bsg rqst type: FC_BSG_HST_CT else type: 101 - loop-id=1 portid=fffffa.
kernel: qla2xxx [0000:21:00.1]-70bb:7: qla24xx_bsg_timeout CMD timeout. bsg ptr ffff9971a42f43b8 msgcode 80000004 vendor cmd fa010000
kernel: qla2xxx [0000:21:00.1]-7012:7: qla_bsg_found : 2206 : Error Inject 2.
kernel: qla2xxx [0000:21:00.1]-802c:7: Aborting bsg ffff9971a42f43b8 sp=ffff99762c304440 handle=5e rval=5
kernel: qla2xxx [0000:21:00.1]-704f:7: bsg abort fail.  bsg=ffff9971a42f43b8 sp=ffff99762c304440 rval=5.
kernel: qla2xxx [0000:21:00.1]-7051:7: qla_bsg_found bsg_job_done : bsg ffff9971a42f43b8 result 0xfffffffa sp ffff99762c304440.

Cc: stable@vger.kernel.org
Fixes: c449b41987 ("scsi: qla2xxx: Use QP lock to search for bsg")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20241115130313.46826-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 12:30:13 -05:00
Ranjan Kumar
0deb37c2f4 scsi: mpi3mr: Update driver version to 8.12.0.3.50
Update driver version to 8.12.0.3.50.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20241110194405.10108-6-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 12:21:05 -05:00
Ranjan Kumar
fb6eb98f39 scsi: mpi3mr: Handling of fault code for insufficient power
Before retrying initialization, check and abort if the fault code
indicates insufficient power. Also mark the controller as unrecoverable
instead of issuing reset in the watch dog timer if the fault code
indicates insufficient power.

Signed-off-by: Prayas Patel <prayas.patel@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20241110194405.10108-5-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 12:21:05 -05:00
Ranjan Kumar
0d32014f1e scsi: mpi3mr: Start controller indexing from 0
Instead of displaying the controller index starting from '1' make the
driver display the controller index starting from '0'.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20241110194405.10108-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 12:21:05 -05:00
Ranjan Kumar
711201a8b8 scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
The driver, through the SAS transport, exposes a sysfs interface to
enable/disable PHYs in a controller/expander setup.  When multiple PHYs
are disabled and enabled in rapid succession, the persistent and current
config pages related to SAS IO unit/SAS Expander pages could get
corrupted.

Use separate memory for each config request.

Signed-off-by: Prayas Patel <prayas.patel@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20241110194405.10108-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 12:21:05 -05:00
Ranjan Kumar
367ac16e5f scsi: mpi3mr: Synchronize access to ioctl data buffer
The driver serializes ioctls through a mutex lock but access to the
ioctl data buffer is not guarded by the mutex. This results in multiple
user threads being able to write to the driver's ioctl buffer
simultaneously.

Protect the ioctl buffer with the ioctl mutex.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20241110194405.10108-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 12:21:05 -05:00
Ranjan Kumar
6050471545 scsi: mpt3sas: Update driver version to 51.100.00.00
Update driver version to 51.100.00.00.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20241110173341.11595-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 12:04:44 -05:00
Ranjan Kumar
3f5eb062e8 scsi: mpt3sas: Diag-Reset when Doorbell-In-Use bit is set during driver load time
Issue a Diag-Reset when the "Doorbell-In-Use" bit is set during the
driver load/initialization.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20241110173341.11595-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04 12:04:44 -05:00
Martin K. Petersen
e7d3b4079d Merge branch '6.13/scsi-queue' into 6.13/scsi-fixes
Pull in outstanding changes from 6.13/scsi-queue.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-02 12:36:18 -05:00
Linus Torvalds
55cb93fd24 Driver core changes for 6.13-rc1
Here is a small set of driver core changes for 6.13-rc1.
 
 Nothing major for this merge cycle, except for the 2 simple merge
 conflicts are here just to make life interesting.
 
 Included in here are:
   - sysfs core changes and preparations for more sysfs api cleanups that
     can come through all driver trees after -rc1 is out
   - fw_devlink fixes based on many reports and debugging sessions
   - list_for_each_reverse() removal, no one was using it!
   - last-minute seq_printf() format string bug found and fixed in many
     drivers all at once.
   - minor bugfixes and changes full details in the shortlog
 
 As mentioned above, there is 2 merge conflicts with your tree, one is
 where the file is removed (easy enough to resolve), the second is a
 build time error, that has been found in linux-next and the fix can be
 seen here:
 	https://lore.kernel.org/r/20241107212645.41252436@canb.auug.org.au
 
 Other than that, the changes here have been in linux-next with no other
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lEog8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym+0ACgw6wN+LkLVIHWhxTq5DYHQ0QCxY8AoJrRIcKe
 78h0+OU3OXhOy8JGz62W
 =oI5S
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is a small set of driver core changes for 6.13-rc1.

  Nothing major for this merge cycle, except for the two simple merge
  conflicts are here just to make life interesting.

  Included in here are:

   - sysfs core changes and preparations for more sysfs api cleanups
     that can come through all driver trees after -rc1 is out

   - fw_devlink fixes based on many reports and debugging sessions

   - list_for_each_reverse() removal, no one was using it!

   - last-minute seq_printf() format string bug found and fixed in many
     drivers all at once.

   - minor bugfixes and changes full details in the shortlog"

* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
  Fix a potential abuse of seq_printf() format string in drivers
  cpu: Remove spurious NULL in attribute_group definition
  s390/con3215: Remove spurious NULL in attribute_group definition
  perf: arm-ni: Remove spurious NULL in attribute_group definition
  driver core: Constify bin_attribute definitions
  sysfs: attribute_group: allow registration of const bin_attribute
  firmware_loader: Fix possible resource leak in fw_log_firmware_info()
  drivers: core: fw_devlink: Fix excess parameter description in docstring
  driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
  cacheinfo: Use of_property_present() for non-boolean properties
  cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
  drivers: core: fw_devlink: Make the error message a bit more useful
  phy: tegra: xusb: Set fwnode for xusb port devices
  drm: display: Set fwnode for aux bus devices
  driver core: fw_devlink: Stop trying to optimize cycle detection logic
  driver core: Constify attribute arguments of binary attributes
  sysfs: bin_attribute: add const read/write callback variants
  sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
  sysfs: treewide: constify attribute callback of bin_attribute::llseek()
  sysfs: treewide: constify attribute callback of bin_attribute::mmap()
  ...
2024-11-29 11:43:29 -08:00
Linus Torvalds
0637a68b9c SCSI misc on 20241125
Updates to the usual drivers (ufs, lpfc, hisi_sas, st). Amazingly
 enough, no core changes with the biggest set of driver changes being
 ufs (which conflicted with it's own fixes a bit, hence the merges) and
 the rest being minor fixes and updates.
 
 Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ0SFmyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdA6AQC+yzhe
 jx0+EBw1RkjRoT6vapBsjN8Sc1rOr/8+TuJ8KwEA0eVuXSiFEx/ieeKLD2VuE6y4
 NPRB36MZdOxfQaDZAY4=
 =Fj/G
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, lpfc, hisi_sas, st).

  Amazingly enough, no core changes with the biggest set of driver
  changes being ufs (which conflicted with it's own fixes a bit, hence
  the merges) and the rest being minor fixes and updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
  scsi: st: New session only when Unit Attention for new tape
  scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset
  scsi: st: Don't modify unknown block number in MTIOCGET
  scsi: ufs: core: Restore SM8650 support
  scsi: sun3: Mark driver struct with __refdata to prevent section mismatch
  scsi: sg: Enable runtime power management
  scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
  scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb()
  scsi: fusion: Remove unused variable 'rc'
  scsi: bfa: Fix use-after-free in bfad_im_module_exit()
  scsi: esas2r: Remove unused esas2r_build_cli_req()
  scsi: target: Fix incorrect function name in pscsi_create_type_disk()
  scsi: ufs: Replace deprecated PCI functions
  scsi: Switch back to struct platform_driver::remove()
  scsi: pm8001: Increase request sg length to support 4MiB requests
  scsi: pm8001: Initialize devices in pm8001_alloc_dev()
  scsi: pm8001: Use module param to set pcs event log severity
  scsi: ufs: ufs-mediatek: Configure individual LU queue flags
  scsi: MAINTAINERS: Update UFS Exynos entry
  scsi: lpfc: Copyright updates for 14.4.0.6 patches
  ...
2024-11-25 18:50:55 -08:00
Tomas Henzl
50740f4dc7 scsi: megaraid_sas: Fix for a potential deadlock
This fixes a 'possible circular locking dependency detected' warning
      CPU0                    CPU1
      ----                    ----
 lock(&instance->reset_mutex);
                              lock(&shost->scan_mutex);
                              lock(&instance->reset_mutex);
 lock(&shost->scan_mutex);

Fix this by temporarily releasing the reset_mutex.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20240923174833.45345-1-thenzl@redhat.com
Acked-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-11-20 21:53:43 -05:00
liujing
2c354d1230 scsi: lpfc: Fix spelling errors 'asynchronously'
Signed-off-by: liujing <liujing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241108070935.10427-1-liujing@cmss.chinamobile.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-11-20 21:52:06 -05:00
Dr. David Alan Gilbert
575143abcb scsi: bfa: Remove unused parsers
bfa has a set of structure parsers, of which quite a few are unused.
Remove the unused set.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241117135215.38771-3-linux@treblig.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-11-20 21:39:51 -05:00
Dr. David Alan Gilbert
52172a352c scsi: bfa: Remove unused structure builders
bfa has a large set of structure builders, of which only about 60% are
used; remove the rest.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241117135215.38771-2-linux@treblig.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-11-20 21:39:51 -05:00
Magnus Lindholm
c064de86d2 scsi: qla1280: Fix hw revision numbering for ISP1020/1040
Fix the hardware revision numbering for Qlogic ISP1020/1040 boards.  HWMASK
suggests that the revision number only needs four bits, this is consistent
with how NetBSD does things in their ISP driver. Verified on a IPS1040B
which is seen as rev 5 not as BIT_4.

Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20241113225636.2276-1-linmag7@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-11-20 21:32:48 -05:00
Martin K. Petersen
8e3b6345d1 Merge branch '6.12/scsi-fixes' into 6.13/scsi-staging
Pull in the fixes branch to resolve conflict in UFS core.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-11-20 21:26:59 -05:00
Linus Torvalds
5c2b050848 A set of updates for the interrupt subsystem:
- Tree wide:
 
     * Make nr_irqs static to the core code and provide accessor functions
       to remove existing and prevent future aliasing problems with local
       variables or function arguments of the same name.
 
   - Core code:
 
     * Prevent freeing an interrupt in the devres code which is not managed
       by devres in the first place.
 
     * Use seq_put_decimal_ull_width() for decimal values output in
       /proc/interrupts which increases performance significantly as it
       avoids parsing the format strings over and over.
 
     * Optimize raising the timer and hrtimer soft interrupts by using the
       'set bit only' variants instead of the combined version which checks
       whether ksoftirqd should be woken up. The latter is a pointless
       exercise as both soft interrupts are raised in the context of the
       timer interrupt and therefore never wake up ksoftirqd.
 
     * Delegate timer/hrtimer soft interrupt processing to a dedicated thread
       on RT.
 
       Timer and hrtimer soft interrupts are always processed in ksoftirqd
       on RT enabled kernels. This can lead to high latencies when other
       soft interrupts are delegated to ksoftirqd as well.
 
       The separate thread allows to run them seperately under a RT
       scheduling policy to reduce the latency overhead.
 
   - Drivers:
 
     * New drivers or extensions of existing drivers to support Renesas
       RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
       chips
 
     * Support for multi-cluster GICs on MIPS.
 
       MIPS CPUs can come with multiple CPU clusters, where each CPU cluster
       has its own GIC (Generic Interrupt Controller). This requires to
       access the GIC of a remote cluster through a redirect register block.
 
       This is encapsulated into a set of helper functions to keep the
       complexity out of the actual code paths which handle the GIC details.
 
     * Support for encrypted guests in the ARM GICV3 ITS driver
 
       The ITS page needs to be shared with the hypervisor and therefore
       must be decrypted.
 
     * Small cleanups and fixes all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7ggcTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoaf7D/9G6FgJXx/60zqnpnOr9Yx0hxjaI47x
 PFyCd3P05qyVMBYXfI99vrSKuVdMZXJ/fH5L83y+sOaTASyLTzg37igZycIDJzLI
 FnHh/m/+UA8k2aIC5VUiNAjne2RLaTZiRN15uEHFVjByC5Y+YTlCNUE4BBhg5RfQ
 hKmskeffWdtui3ou13CSNvbFn+pmqi4g6n1ysUuLhiwM2E5b1rZMprcCOnun/cGP
 IdUQsODNWTTv9eqPJez985M6A1x2SCGNv7Z73h58B9N0pBRPEC1xnhUnCJ1sA0cJ
 pnfde2C1lztEjYbwDngy0wgq0P6LINjQ5Ma2YY2F2hTMsXGJxGPDZm24/u5uR46x
 N/gsOQMXqw6f5yvbiS7Asx9WzR6ry8rJl70QRgTyozz7xxJTaiNm2HqVFe2wc+et
 Q/BzaKdhmUJj1GMZmqD2rrgwYeDcb4wWYNtwjM4PVHHxYlJVq0mEF1kLLS8YDyjf
 HuGPVqtSkt3E0+Br3FKcv5ltUQP8clXbudc6L1u98YBfNK12hW8L+c3YSvIiFoYM
 ZOAeANPM7VtQbP2Jg2q81Dd3CShImt5jqL2um+l8g7+mUE7l9gyuO/w/a5dQ57+b
 kx7mHHIW2zCeHrkZZbRUYzI2BJfMCCOVN4Ax5OZxTLnLsL9VEehy8NM8QYT4TS8R
 XmTOYW3U9XR3gw==
 =JqxC
 -----END PGP SIGNATURE-----

Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull interrupt subsystem updates from Thomas Gleixner:
 "Tree wide:

   - Make nr_irqs static to the core code and provide accessor functions
     to remove existing and prevent future aliasing problems with local
     variables or function arguments of the same name.

  Core code:

   - Prevent freeing an interrupt in the devres code which is not
     managed by devres in the first place.

   - Use seq_put_decimal_ull_width() for decimal values output in
     /proc/interrupts which increases performance significantly as it
     avoids parsing the format strings over and over.

   - Optimize raising the timer and hrtimer soft interrupts by using the
     'set bit only' variants instead of the combined version which
     checks whether ksoftirqd should be woken up. The latter is a
     pointless exercise as both soft interrupts are raised in the
     context of the timer interrupt and therefore never wake up
     ksoftirqd.

   - Delegate timer/hrtimer soft interrupt processing to a dedicated
     thread on RT.

     Timer and hrtimer soft interrupts are always processed in ksoftirqd
     on RT enabled kernels. This can lead to high latencies when other
     soft interrupts are delegated to ksoftirqd as well.

     The separate thread allows to run them seperately under a RT
     scheduling policy to reduce the latency overhead.

  Drivers:

   - New drivers or extensions of existing drivers to support Renesas
     RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
     chips

   - Support for multi-cluster GICs on MIPS.

     MIPS CPUs can come with multiple CPU clusters, where each CPU
     cluster has its own GIC (Generic Interrupt Controller). This
     requires to access the GIC of a remote cluster through a redirect
     register block.

     This is encapsulated into a set of helper functions to keep the
     complexity out of the actual code paths which handle the GIC
     details.

   - Support for encrypted guests in the ARM GICV3 ITS driver

     The ITS page needs to be shared with the hypervisor and therefore
     must be decrypted.

   - Small cleanups and fixes all over the place"

* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
  irqchip/riscv-aplic: Prevent crash when MSI domain is missing
  genirq/proc: Use seq_put_decimal_ull_width() for decimal values
  softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
  timers: Use __raise_softirq_irqoff() to raise the softirq.
  hrtimer: Use __raise_softirq_irqoff() to raise the softirq
  riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
  irqchip: Add T-HEAD C900 ACLINT SSWI driver
  dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
  irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
  irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
  irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
  irqchip/mips-gic: Multi-cluster support
  irqchip/mips-gic: Setup defaults in each cluster
  irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
  irqchip/mips-gic: Replace open coded online CPU iterations
  genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
  genirq/devres: Don't free interrupt which is not managed by devres
  irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
  irqchip/aspeed-intc: Add AST27XX INTC support
  dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
  ...
2024-11-19 15:54:19 -08:00
Linus Torvalds
77a0cfafa9 for-6.13/block-20241118
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmc7S40QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjHVD/43rDZ8ehs+IAAr6S0RemNX1SRG0mK2UOEb
 kMoNogS7StO/c4JYW3JuzCyLRn5ZsgeWV/muqxwDEWQrmTGrvi+V45KikrZPwm3k
 p0ump33qV9EU2jiR1MKZjtwK2P0CI7/DD3W8ww6IOvKbTT7RcqQcdHznvXArFBtc
 xCuQPpayFG7ZasC+N9VaBwtiUEVgU3Ek9AFT7UVZRWajjHPNalQwaooJWayO0rEG
 KdoW5yG0ryLrgCY2ACSvRLS+2s14EJtb8hgT08WKHTNgd5LxhSKxfsTapamua+7U
 FdVS6Ij0tEkgu2jpvgj7QKO0Uw10Cnep2gj7RHts/LVewvkliS6XcheOzqRS1jWU
 I2EI+UaGOZ11OUiw52VIveEVS5zV/NWhgy5BSP9LYEvXw0BUAHRDYGMem8o5G1V1
 SWqjIM1UWvcQDlAnMF9FDVzojvjVUmYWvcAlFFztO8J0B7SavHR3NcfHwEf57reH
 rNoUbi/9c4/wjJJF33gejiR5pU+ewy/Mk75GrtX3xpEqlztfRbf9/FbPCMEAO1KR
 DF/b3lkUV9i2/BRW6a0SpZ5RDSmSYMnateel6TrPyVSRnpiSSFO8FrbynwUOa17b
 6i49YDFWzzXOrR1YWDg6IEtTrcmBEmvi7F6aoDs020qUnL0hwLn1ZuoIxuiFEpor
 Z0iFF1B/nw==
 =PWTH
 -----END PGP SIGNATURE-----

Merge tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - NVMe updates via Keith:
      - Use uring_cmd helper (Pavel)
      - Host Memory Buffer allocation enhancements (Christoph)
      - Target persistent reservation support (Guixin)
      - Persistent reservation tracing (Guixen)
      - NVMe 2.1 specification support (Keith)
      - Rotational Meta Support (Matias, Wang, Keith)
      - Volatile cache detection enhancment (Guixen)

 - MD updates via Song:
      - Maintainers update
      - raid5 sync IO fix
      - Enhance handling of faulty and blocked devices
      - raid5-ppl atomic improvement
      - md-bitmap fix

 - Support for manually defining embedded partition tables

 - Zone append fixes and cleanups

 - Stop sending the queued requests in the plug list to the driver
   ->queue_rqs() handle in reverse order.

 - Zoned write plug cleanups

 - Cleanups disk stats tracking and add support for disk stats for
   passthrough IO

 - Add preparatory support for file system atomic writes

 - Add lockdep support for queue freezing. Already found a bunch of
   issues, and some fixes for that are in here. More will be coming.

 - Fix race between queue stopping/quiescing and IO queueing

 - ublk recovery improvements

 - Fix ublk mmap for 64k pages

 - Various fixes and cleanups

* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
  MAINTAINERS: Update git tree for mdraid subsystem
  block: make struct rq_list available for !CONFIG_BLOCK
  block/genhd: use seq_put_decimal_ull for diskstats decimal values
  block: don't reorder requests in blk_mq_add_to_batch
  block: don't reorder requests in blk_add_rq_to_plug
  block: add a rq_list type
  block: remove rq_list_move
  virtio_blk: reverse request order in virtio_queue_rqs
  nvme-pci: reverse request order in nvme_queue_rqs
  btrfs: validate queue limits
  block: export blk_validate_limits
  nvmet: add tracing of reservation commands
  nvme: parse reservation commands's action and rtype to string
  nvmet: report ns's vwc not present
  md/raid5: Increase r5conf.cache_name size
  block: remove the ioprio field from struct request
  block: remove the write_hint field from struct request
  nvme: check ns's volatile write cache not present
  nvme: add rotational support
  nvme: use command set independent id ns if available
  ...
2024-11-18 16:50:08 -08:00
Christoph Hellwig
61952bb734 block: remove the write_hint field from struct request
The write_hint is only used for read/write requests, which must have a
bio attached to them.  Just use the bio field instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241112170050.1612998-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-11-12 14:42:02 -07:00
Christoph Hellwig
559218d43e block: pre-calculate max_zone_append_sectors
max_zone_append_sectors differs from all other queue limits in that the
final value used is not stored in the queue_limits but needs to be
obtained using queue_limits_max_zone_append_sectors helper.  This not
only adds (tiny) extra overhead to the I/O path, but also can be easily
forgotten in file system code.

Add a new max_hw_zone_append_sectors value to queue_limits which is
set by the driver, and calculate max_zone_append_sectors from that and
the other inputs in blk_validate_zoned_limits, similar to how
max_sectors is calculated to fix this.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241104073955.112324-3-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241108154657.845768-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-11-11 09:20:36 -07:00
Linus Torvalds
c291c9cfd7 SCSI fixes on 20241108
Two small fixes, the drivers one in ufs simply delays running a work
 queue and the generic one in zoned storage switches to a more correct
 API that tries the standard buddy allocator first (for small
 allocations); this fixes an allocation problem with small allocations
 seen under memory pressure.
 
 Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZy5pZSYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdonAQCeHKnp
 BkxbSls2uPQn4DAxak1tCfxTujMFWxQHP2Y92gEA2q3chF7P136z2rYp0wGfm7P4
 ivxddAWZth4tV7TUUw8=
 =by5B
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two small fixes, the drivers one in ufs simply delays running a work
  queue and the generic one in zoned storage switches to a more correct
  API that tries the standard buddy allocator first (for small
  allocations); this fixes an allocation problem with small allocations
  seen under memory pressure"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Start the RTC update work later
  scsi: sd_zbc: Use kvzalloc() to allocate REPORT ZONES buffer
2024-11-08 09:56:27 -10:00
Jens Axboe
ab9bc81c1c Revert "block: pre-calculate max_zone_append_sectors"
This causes issue on, at least, nvme-mpath where my boot fails with:

WARNING: CPU: 354 PID: 2729 at block/blk-settings.c:75 blk_validate_limits+0x356/0x380
Modules linked in: tg3(+) nvme usbcore scsi_mod ptp i2c_piix4 libphy nvme_core crc32c_intel scsi_common usb_common pps_core i2c_smbus
CPU: 354 UID: 0 PID: 2729 Comm: kworker/u2061:1 Not tainted 6.12.0-rc6+ #181
Hardware name: Dell Inc. PowerEdge R7625/06444F, BIOS 1.8.3 04/02/2024
Workqueue: async async_run_entry_fn
RIP: 0010:blk_validate_limits+0x356/0x380
Code: f6 47 01 04 75 28 83 bf 94 00 00 00 00 75 39 83 bf 98 00 00 00 00 75 34 83 7f 68 00 75 32 31 c0 83 7f 5c 00 0f 84 9b fd ff ff <0f> 0b eb 13 0f 0b eb 0f 48 c7 c0 74 12 58 92 48 89 c7 e8 13 76 46
RSP: 0018:ffffa8a1dfb93b30 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff9232829c8388 RCX: 0000000000000088
RDX: 0000000000000080 RSI: 0000000000000200 RDI: ffffa8a1dfb93c38
RBP: 000000000000000c R08: 00000000ffffffff R09: 000000000000ffff
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9232829b9000
R13: ffff9232829b9010 R14: ffffa8a1dfb93c38 R15: ffffa8a1dfb93c38
FS:  0000000000000000(0000) GS:ffff923867c80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055c1b92480a8 CR3: 0000002484ff0002 CR4: 0000000000370ef0
Call Trace:
 <TASK>
 ? __warn+0xca/0x1a0
 ? blk_validate_limits+0x356/0x380
 ? report_bug+0x11a/0x1a0
 ? handle_bug+0x5e/0x90
 ? exc_invalid_op+0x16/0x40
 ? asm_exc_invalid_op+0x16/0x20
 ? blk_validate_limits+0x356/0x380
 blk_alloc_queue+0x7a/0x250
 __blk_alloc_disk+0x39/0x80
 nvme_mpath_alloc_disk+0x13d/0x1b0 [nvme_core]
 nvme_scan_ns+0xcc7/0x1010 [nvme_core]
 async_run_entry_fn+0x27/0x120
 process_scheduled_works+0x1a0/0x360
 worker_thread+0x2bc/0x350
 ? pr_cont_work+0x1b0/0x1b0
 kthread+0x111/0x120
 ? kthread_unuse_mm+0x90/0x90
 ret_from_fork+0x30/0x40
 ? kthread_unuse_mm+0x90/0x90
 ret_from_fork_asm+0x11/0x20
 </TASK>
---[ end trace 0000000000000000 ]---

presumably due to max_zone_append_sectors not being cleared to zero,
resulting in blk_validate_zoned_limits() complaining and failing.

This reverts commit 2a8f6153e1.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-11-07 05:45:34 -07:00
Martin K. Petersen
128faa1845 Merge patch series "scsi: st: Device reset patches"
Kai Mäkisara <Kai.Makisara@kolumbus.fi> says:

These three patches were developed in response to Bugzilla report

  https://bugzilla.kernel.org/show_bug.cgi?id=219419

After device reset, the tape driver allows only operations that don't
write or read anything from tape. The reason for this is that many
(most ?) drives rewind the tape after reset and the subsequent reads
or writes would not be at the tape location the user expects. Reading
and writing is allowed again when the user does something to position the
tape (e.g., rewind).

The Bugzilla report considers the case when a user, after reset, tries
to read the drive status with MTIOCGET ioctl, but it fails. MTIOCGET
does not return much useful data after reset, but it can be allowed.
MTLOAD positions the tape and it should be allowed. The second patch
adds these to the set of allowed operations after device reset.

The first patch fixes a bug seen when developing the second patch.

V2: The third patch is added to fix a bug that resulted in not
blocking writes if reset occurs while the device file is not open.

Link: https://lore.kernel.org/r/20241106095723.63254-1-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-11-06 21:19:06 -05:00
Kai Mäkisara
a4550b28c8 scsi: st: New session only when Unit Attention for new tape
Currently the code starts new tape session when any Unit Attention
(UA) is seen when opening the device. This leads to incorrectly
clearing pos_unknown when the UA is for reset. Set new session only
when the UA is for a new tape.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20241106095723.63254-4-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-11-06 21:18:16 -05:00