Each variable-length property like interrupts or resets must have fixed
constraints on number of items for given variant in binding. The
clauses in "if:then:" block should define both limits: upper and lower.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250128094719.63776-1-krzysztof.kozlowski@linaro.org
In order to explain the name clean-ups in GSP RPC routines, a kernel
doc to explain the memory layout and terms is required.
Add a kernel doc to introduce the GSP RPC.
Cc: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
[ Fix bullet list indentation; add SPDX-License-Identifier. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-2-zhiw@nvidia.com
RK3576 HDMI TX Controller is very similar to that of RK3588, but
with some control bits for IO and interrupts status scattered across
different GRF.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231094425.253398-3-andyshrk@163.com
Define how to handle buffers with multiple possible placement so we
don't get incompatible implementations. Callout the resident requirement
for drm-purgeable- explicitly. Remove the requirement for there to be
only drm-memory- or only drm-resident-, it's not what's implemented and
having both is better for back-compat. Also re-order the paragraphs to
flow better.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-4-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
The DP subsystem for ZynqMP supports audio via two channels, and the DP
DMA has dma-engines for those channels. For some reason the DT binding
has not specified those channels, even if the picture included in
xlnx,zynqmp-dpsub.yaml shows "2 x aud" DMAs.
This hasn't caused any issues as the drivers have not supported audio,
and has thus gone unnoticed.
To make it possible to add the audio support to the driver, add the two
audio DMAs to the binding. While strictly speaking this is an ABI break,
there should be no regressions caused by this as we're adding new
entries at the end of the dmas list, and, after the audio support has
been added in "arm64: dts: zynqmp: Add DMA for DP audio", the driver
will treat the audio DMAs as optional to also support the old bindings.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023-xilinx-dp-audio-v4-1-5128881457be@ideasonboard.com
Extend the Renesas DSI display bindings to support the r8a779h0 V4M.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-5-e77421093c05@ideasonboard.com
Extend the Renesas DU display bindings to support the r8a779h0 V4M.
Note that we remove the requirement for two ports from the global part
of the bindings, as each conditional part defines the number of required
ports already. This came up with r8a779h0 as it's the first one that has
only one port.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-4-e77421093c05@ideasonboard.com
The binding is missing maxItems for all renesas,cmms and renesas,vsps
properties. As the amount of cmms or vsps is always a fixed amount, set
the maxItems to match the minItems.
Also add the minItems and maxItems to the top level properties.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-3-e77421093c05@ideasonboard.com
The Display Serial Interface 2 (DSI-2) is part of a group of communication
protocols defined by the MIPI Alliance. The RK3588 implements this
specification in its two MIPI DSI-2 Host Controllers that are based on a
new Synopsys IP.
Tested-by: Dmitry Yashin <dmt.yashin@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209231021.2180582-3-heiko@sntech.de
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
- MTE/hugetlbfs:
- Set VM_MTE_ALLOWED in the arch code and remove it from the core code
for hugetlbfs mappings
- Fix copy_highpage() warning when the source is a huge page but not
MTE tagged, taking the wrong small page path
- drivers/virt/coco:
- Add the pKVM and Arm CCA drivers under the arm64 maintainership
- Fix the pkvm driver to fall back to ioremap() (and warn) if the
MMIO_GUARD hypercall fails
- Keep the Arm CCA driver default 'n' rather than 'm'
- A series of fixes for the arm64 ptrace() implementation, potentially
leading to the kernel consuming uninitialised stack variables when
PTRACE_SETREGSET is invoked with a length of 0
- Fix zone_dma_limit calculation when RAM starts below 4GB and ZONE_DMA
is capped to this limit
- Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a call
to page_to_phys() (from patch_map()) which checks pfn_valid() before
vmemmap has been set up
- Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI ops
when the kernel assumes 8-bit ASIDs but running under a hypervisor on
a system that implements 16-bit ASIDs (found running Linux under
Parallels on Apple M4)
- ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it is
using the same SMMU PMCG as HIP09 and suffers from the same errata
- Add GCS to cpucap_is_possible(), missed in the recent merge
-----BEGIN PGP SIGNATURE-----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=zZ4I
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Nothing major, some left-overs from the recent merging window (MTE,
coco) and some newly found issues like the ptrace() ones.
- MTE/hugetlbfs:
- Set VM_MTE_ALLOWED in the arch code and remove it from the core
code for hugetlbfs mappings
- Fix copy_highpage() warning when the source is a huge page but
not MTE tagged, taking the wrong small page path
- drivers/virt/coco:
- Add the pKVM and Arm CCA drivers under the arm64 maintainership
- Fix the pkvm driver to fall back to ioremap() (and warn) if the
MMIO_GUARD hypercall fails
- Keep the Arm CCA driver default 'n' rather than 'm'
- A series of fixes for the arm64 ptrace() implementation,
potentially leading to the kernel consuming uninitialised stack
variables when PTRACE_SETREGSET is invoked with a length of 0
- Fix zone_dma_limit calculation when RAM starts below 4GB and
ZONE_DMA is capped to this limit
- Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a
call to page_to_phys() (from patch_map()) which checks pfn_valid()
before vmemmap has been set up
- Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI
ops when the kernel assumes 8-bit ASIDs but running under a
hypervisor on a system that implements 16-bit ASIDs (found running
Linux under Parallels on Apple M4)
- ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it
is using the same SMMU PMCG as HIP09 and suffers from the same
errata
- Add GCS to cpucap_is_possible(), missed in the recent merge"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
arm64: cpufeature: Add GCS to cpucap_is_possible()
coco: virt: arm64: Do not enable cca guest driver by default
arm64: mte: Fix copy_highpage() warning on hugetlb folios
arm64: Ensure bits ASID[15:8] are masked out when the kernel uses 8-bit ASIDs
ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A
MAINTAINERS: Add CCA and pKVM CoCO guest support to the ARM64 entry
drivers/virt: pkvm: Don't fail ioremap() call if MMIO_GUARD fails
arm64: patching: avoid early page_to_phys()
arm64: mm: Fix zone_dma_limit calculation
arm64: mte: set VM_MTE_ALLOWED for hugetlbfs at correct place
- Fix a couple of memory-leaks during genpd init/remove
pmdomain providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain layer
-----BEGIN PGP SIGNATURE-----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=fCUR
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix a couple of memory-leaks during genpd init/remove
Providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain
layer"
* tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Adjust delay after power up handshake
pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails
pmdomain: core: Add missing put_device()
dt-bindings: power: mediatek: Add another nested power-domain layer
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth: bnxt_en: support header page pool in queue API
- eth: ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth: mlxsw: use correct key block on Spectrum-4
- eth: mlx5: fix memory leak in mlx5hws_definer_calc_layout
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=nkPk
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmdO8FgACgkQ+iyteGJfRsqdmgCgqPArbZweV/LTPcZXx89MaIEd
hG8AoLrh8n5L08d6r5v1sII5To4KoZI7
=IX0/
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
HiSilicon HIP09A platforms using the same SMMU PMCG with HIP09
and thus suffers the same erratum. List them in the PMCG platform
information list without introducing a new SMMU PMCG Model.
Update the silicon-errata.rst as well.
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Link: https://lore.kernel.org/r/20241205013331.1484017-1-xiaqinxin@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts the misconversions introduced by commit cdd30ebb1b
("module: Convert symbol namespace to string literal").
The affected descriptions refer to MODULE_IMPORT_NS() tags in general,
rather than suggesting the use of the empty string ("") as the
namespace.
Fixes: cdd30ebb1b ("module: Convert symbol namespace to string literal")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The MT8188 SoC has a more in-depth power-domain tree, and the
CHECK_DTBS=y check could fail because the current MediaTek power
dt-binding is insufficient to cover its CAM_SUBA and CAM_SUBB
sub-domains.
Add one more nested power-domain layer to pass the check.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Fei Shao <fshao@chromium.org>
Message-ID: <20241001113052.3124869-2-fshao@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause some
virtual interrupts to get lost
- More platform_driver::remove() conversion
-----BEGIN PGP SIGNATURE-----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=xeni
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Move the ->select callback to the correct ops structure in
irq-mvebu-sei to fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause
some virtual interrupts to get lost
- More platform_driver::remove() conversion
* tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Switch back to struct platform_driver::remove()
irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801
irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
by erratum 1386 so that the matching loop actually terminates instead of
going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the relocatable
kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN has been
disabled
-----BEGIN PGP SIGNATURE-----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=RC2M
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a terminating zero end-element to the array describing AMD CPUs
affected by erratum 1386 so that the matching loop actually
terminates instead of going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the
relocatable kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN
has been disabled
* tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Terminate the erratum_1386_microcode array
x86/Documentation: Update algo in init_size description of boot protocol
x86/microcode/AMD: Flush patch buffer mapping after application
x86/mm: Carve out INVLPG inline asm for use by others
x86/cpu: Fix PPIN initialization
* Fixes.
RISC-V:
* Svade and Svadu (accessed and dirty bit) extension support for host and
guest. This was acked on the mailing list by the RISC-V maintainer, see
https://patchew.org/linux/20240726084931.28924-1-yongxuan.wang@sifive.com/.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmdKS0QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP7hggAmt5CJesFGIuDwQgJX1KuNWAS84AX
Oq5SPZLH0XjE5YDm6AusSzvbtOhRM6mARU5/iqMRE6Mqpf4MXpP9tOo6xaDiL7+m
bOFsDYEO73WQyrIfFUCZ7dXiTbDVtQfNH8Z1yQwHPsa1d+WDYY3tLbCe5qCdqYMF
JDiB7K0cQzPDmhCwf3Zf8mW2ZRI0QsTqiuFUfVGGNgFDspWfBFBqkLCkrMNmbp9z
ye375oKb2VCe6OBJCY+Nl6tdoBUkz+CtZDCxkxuh0Uk4NmsUC9JMye9iwgU9DuI7
nagFuvpUGcgbZvrx1ly47TL+wcEFLwnBJ0xBZTGIgVoZHj/wX9GM+tSgIw==
=semZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
- ARM fixes
- RISC-V Svade and Svadu (accessed and dirty bit) extension support for
host and guest
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test
RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM
dt-bindings: riscv: Add Svade and Svadu Entries
RISC-V: Add Svade and Svadu Extensions Support
KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters
KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status
KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure
KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes
KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition
KVM: arm64: vgic: Make vgic_get_irq() more robust
KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR
The BareUDP documentation had several grammar and spelling mistakes,
making it harder to read. This patch fixes those errors to improve
clarity and readability for developers.
Signed-off-by: Vyshnav Ajith <puthen1977@gmail.com>
Link: https://patch.msgid.link/20241121224827.12293-1-puthen1977@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
-----BEGIN PGP SIGNATURE-----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=GDKD
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
* tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits)
kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms
gitignore: Don't ignore 'tags' directory
kbuild: add dependency from vmlinux to resolve_btfids
modpost: replace tdb_hash() with hash_str()
kbuild: deb-pkg: add python3:native to build dependency
genksyms: reduce indentation in export_symbol()
modpost: improve error messages in device_id_check()
modpost: rename alias symbol for MODULE_DEVICE_TABLE()
modpost: rename variables in handle_moddevtable()
modpost: move strstarts() to modpost.h
modpost: convert do_usb_table() to a generic handler
modpost: convert do_of_table() to a generic handler
modpost: convert do_pnp_device_entry() to a generic handler
modpost: convert do_pnp_card_entries() to a generic handler
modpost: call module_alias_printf() from all do_*_entry() functions
modpost: pass (struct module *) to do_*_entry() functions
modpost: remove DEF_FIELD_ADDR_VAR() macro
modpost: deduplicate MODULE_ALIAS() for all drivers
modpost: introduce module_alias_printf() helper
modpost: remove unnecessary check in do_acpi_entry()
...
Here is a small set of tty and serial driver updates for 6.13-rc1.
Nothing major at all this time, only some small changes:
- few device tree binding updates
- 8250_exar serial driver updates
- imx serial driver updates
- sprd_serial driver updates
- other tiny serial driver updates, full details in the shortlog
All of these have been in linux-next for a while with one reported
issue, but that commit has now been reverted.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0s3DA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykmgQCeIDU0GHWFuzEiZNmsO5bLN8AcoFQAn1rlOaHu
9lOOf7xVSCUBU0GgynI5
=SEtJ
-----END PGP SIGNATURE-----
Merge tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is a small set of tty and serial driver updates for 6.13-rc1.
Nothing major at all this time, only some small changes:
- few device tree binding updates
- 8250_exar serial driver updates
- imx serial driver updates
- sprd_serial driver updates
- other tiny serial driver updates, full details in the shortlog
All of these have been in linux-next for a while with one reported
issue, but that commit has now been reverted"
* tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits)
Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
serial: amba-pl011: fix build regression
dt-bindings: serial: Add a new compatible string for ums9632
serial: sprd: Add support for sc9632
tty/serial/altera_uart: unwrap error log string
tty/serial/altera_jtaguart: unwrap error log string
serial: amba-pl011: Fix RX stall when DMA is used
tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
serial: 8250_fintek: Add support for F81216E
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
tty: atmel_serial: Fix typo retreives to retrieves
tty: atmel_serial: Use devm_platform_ioremap_resource()
serial: 8250: omap: Move pm_runtime_get_sync
tty: serial: samsung: Add Exynos8895 compatible
dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible
serial: 8250_dw: Add Sophgo SG2044 quirk
dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry.
altera_jtaguart: Use dev_err() to report error attaching IRQ
altera_uart: Use dev_err() to report error attaching IRQ handler
...
A collection of small fixes. Majority of changes are device-specific
fixes and quirks, while there are a few core fixes to address
regressions and corner cases spotted by fuzzers.
- Fix of spinlock range that wrongly covered kvfree() call in rawmidi
- Fix potential NULL dereference at PCM mmap
- Fix incorrectly advertised MIDI 2.0 UMP Function Block info
- Various ASoC AMD quirks and fixes
- ASoC SOF Intel, Mediatek, HDMI-codec fixes
- A few more quirks and TAS2781 codec fix for HD-audio
- A couple of fixes for USB-audio for malicious USB descriptors
-----BEGIN PGP SIGNATURE-----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=FLBb
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. Majority of changes are device-specific
fixes and quirks, while there are a few core fixes to address
regressions and corner cases spotted by fuzzers.
- Fix of spinlock range that wrongly covered kvfree() call in rawmidi
- Fix potential NULL dereference at PCM mmap
- Fix incorrectly advertised MIDI 2.0 UMP Function Block info
- Various ASoC AMD quirks and fixes
- ASoC SOF Intel, Mediatek, HDMI-codec fixes
- A few more quirks and TAS2781 codec fix for HD-audio
- A couple of fixes for USB-audio for malicious USB descriptors"
* tag 'sound-fix-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda: improve bass speaker support for ASUS Zenbook UM5606WA
ALSA: hda/realtek: Apply quirk for Medion E15433
ASoC: amd: yc: Add a quirk for microfone on Lenovo ThinkPad P14s Gen 5 21MES00B00
ASoC: SOF: ipc3-topology: Convert the topology pin index to ALH dai index
ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe
ASoC: amd: yc: Fix for enabling DMIC on acp6x via _DSD entry
ALSA: ump: Fix evaluation of MIDI 1.0 FB info
ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc()
ALSA: hda: Show the codec quirk info at probing
ALSA: asihpi: Remove unused variable
ALSA: hda/realtek: Set PCBeep to default value for ALC274
ALSA: hda/tas2781: Add speaker id check for ASUS projects
ALSA: hda/realtek: Update ALC225 depop procedure
ALSA: hda/realtek: Enable speaker pins for Medion E15443 platform
ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook X G1i
ALSA: usb-audio: Fix out of bounds reads when finding clock sources
ALSA: rawmidi: Fix kvfree() call in spinlock
ALSA: hda/realtek: Fix Internal Speaker and Mic boost of Infinix Y4 Max
ASoC: amd: yc: Add quirk for microphone on Lenovo Thinkpad T14s Gen 6 21M1CTO1WW
ASoC: doc: dapm: Add location information for dapm-graph tool
...
Here is the "big and hairy" char/misc/iio and other small driver
subsystem updates for 6.13-rc1. Sorry for doing this at the end of the
merge window, conference and holiday travel got in the way on my side
(hence the 5am pull request emails...)
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible. I think this is the tipping point,
expect to see way more rust drivers going forward now that these
bindings are present. Next merge window hopefully we will have pci
and platform drivers working, which will fully enable almost all
driver subsystems to start accepting (or at least getting) rust
drivers. This is the end result of a lot of work from a lot of
people, congrats to all of them for getting this far, you've proved
many of us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
Note, there is a semi-hairy rust merge conflict when pulling this. The
resolution has been in linux-next for a while and can be seen here:
https://lore.kernel.org/all/20241111173459.2646d4af@canb.auug.org.au/
All of these have been in linux-next for a while, with no other reported
issues other than that merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKHQCgvI4Muu2tpdINBVe24Zc8S3ozg0AAnRNg3F7r
ikneftUDYtuviSGU/Rs8
=CW+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the 2 simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups that
can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog
As mentioned above, there is 2 merge conflicts with your tree, one is
where the file is removed (easy enough to resolve), the second is a
build time error, that has been found in linux-next and the fix can be
seen here:
https://lore.kernel.org/r/20241107212645.41252436@canb.auug.org.au
Other than that, the changes here have been in linux-next with no other
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lEog8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym+0ACgw6wN+LkLVIHWhxTq5DYHQ0QCxY8AoJrRIcKe
78h0+OU3OXhOy8JGz62W
=oI5S
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
Here is the big set of USB and Thunderbolt changes for 6.13-rc1.
Overall, a pretty slow development cycle, the majority of the work going
into the debugfs interface for the thunderbolt (i.e. USB4) code, to help
with debugging the myrad ways that hardware vendors get their interfaces
messed up. Other than that, here's the highlights:
- thunderbolt changes and additions to debugfs interfaces
- lots of device tree updates for new and old hardware
- UVC configfs gadget updates and new apis for features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- typec driver updates and fixes
- lots of other small updates and fixes, full details in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lBqA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynTXQCfSs0ldBqZoINU/22q8BUg7ybb+pcAoL5EbbEm
b2igfp6YIEWAtUkactmO
=gwwq
-----END PGP SIGNATURE-----
Merge tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.13-rc1.
Overall, a pretty slow development cycle, the majority of the work
going into the debugfs interface for the thunderbolt (i.e. USB4) code,
to help with debugging the myrad ways that hardware vendors get their
interfaces messed up. Other than that, here's the highlights:
- thunderbolt changes and additions to debugfs interfaces
- lots of device tree updates for new and old hardware
- UVC configfs gadget updates and new apis for features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- typec driver updates and fixes
- lots of other small updates and fixes, full details in the shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits)
usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property
dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property
dt-bindings: connector: Add time property for Sink BC12 detection completion
usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb
usb: dwc3: gadget: Cleanup SG handling
usb: dwc3: gadget: Fix looping of queued SG entries
usb: dwc3: gadget: Fix checking for number of TRBs left
usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED
Revert "usb: gadget: composite: fix OS descriptors w_value logic"
usb: ehci-spear: fix call balance of sehci clk handling routines
USB: make to_usb_device_driver() use container_of_const()
USB: make to_usb_driver() use container_of_const()
USB: properly lock dynamic id list when showing an id
USB: make single lock for all usb dynamic id lists
drivers/usb/storage: refactor min with min_t
drivers/usb/serial: refactor min with min_t
drivers/usb/musb: refactor min/max with min_t/max_t
drivers/usb/mon: refactor min with min_t
drivers/usb/misc: refactor min with min_t
drivers/usb/host: refactor min/max with min_t/max_t
...
- extend next/check table to add support for 2^24 states to the
state machine.
- rework capability audit cache to use broader cred information
instead of just the profile. Also add a time stamp so old
entries can be aged out of the cache.
* Bug Fixes
- fix 'Do simple duplicate message elimination' to clear previous
state when updating in capability audit cache
- Fix memory leak for aa_unpack_strdup()
- properly handle cx/px lookup failure when in complain mode
- allocate xmatch for nullpdb inside aa_alloc_null fixing a
NULL ptr deref of tracking profiles in when in complain mode
* Cleanups
- Remove everything being reported as deadcode
- replace misleading 'scrubbing environment' phrase in debug print
- Remove unnecessary NULL check before kvfree()
- clean up duplicated parts of handle_onexec()
- Use IS_ERR_OR_NULL() helper function
- move new_profile declaration to top of block instead immediately
after label to remove C23 extension warning
* Documentation
- add comment to document capability.c:profile_capable ad ptr
parameter can not be NULL
- add comment to document first entry is in packed perms struct is
reserved for future planned expansion.
- Update LSM/apparmor.rst add blurb for
CONFIG_DEFAULT_SECURITY_APPARMOR
-----BEGIN PGP SIGNATURE-----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=2M1G
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2024-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Features:
- extend next/check table to add support for 2^24 states to the state
machine.
- rework capability audit cache to use broader cred information
instead of just the profile. Also add a time stamp so old entries
can be aged out of the cache.
Bug Fixes:
- fix 'Do simple duplicate message elimination' to clear previous
state when updating in capability audit cache
- Fix memory leak for aa_unpack_strdup()
- properly handle cx/px lookup failure when in complain mode
- allocate xmatch for nullpdb inside aa_alloc_null fixing a NULL ptr
deref of tracking profiles in when in complain mode
Cleanups:
- Remove everything being reported as deadcode
- replace misleading 'scrubbing environment' phrase in debug print
- Remove unnecessary NULL check before kvfree()
- clean up duplicated parts of handle_onexec()
- Use IS_ERR_OR_NULL() helper function
- move new_profile declaration to top of block instead immediately
after label to remove C23 extension warning
Documentation:
- add comment to document capability.c:profile_capable ad ptr
parameter can not be NULL
- add comment to document first entry is in packed perms struct is
reserved for future planned expansion.
- Update LSM/apparmor.rst add blurb for DEFAULT_SECURITY_APPARMOR"
* tag 'apparmor-pr-2024-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: lift new_profile declaration to remove C23 extension warning
apparmor: replace misleading 'scrubbing environment' phrase in debug print
parser: drop dead code for XXX_comb macros
apparmor: Remove unused parameter L1 in macro next_comb
Docs: Update LSM/apparmor.rst
apparmor: audit_cap dedup based on subj_cred instead of profile
apparmor: add a cache entry expiration time aging out capability audit cache
apparmor: document capability.c:profile_capable ad ptr not being NULL
apparmor: fix 'Do simple duplicate message elimination'
apparmor: document first entry is in packed perms struct is reserved
apparmor: test: Fix memory leak for aa_unpack_strdup()
apparmor: Remove deadcode
apparmor: Remove unnecessary NULL check before kvfree()
apparmor: domain: clean up duplicated parts of handle_onexec()
apparmor: Use IS_ERR_OR_NULL() helper function
apparmor: add support for 2^24 states to the dfa state machine.
apparmor: properly handle cx/px lookup failure for complain
apparmor: allocate xmatch for nullpdb inside aa_alloc_null
- Make sparc64 compilable with clang
- Replace one-element array with flexible array member
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQfqfbgobF48oKMeq81AykqDLayywUCZ0hfaRQcYW5kcmVhc0Bn
YWlzbGVyLmNvbQAKCRA1AykqDLayy+1tAQCr0D3+1QdWB1HGam9yxoq2sNOeqjJ6
GLv1rjnIYL97nAEAoaiRbb2nukNWhmLcvJi7D6z9x5c/YAOd1oQuUfy7IAk=
=JlvH
-----END PGP SIGNATURE-----
Merge tag 'sparc-for-6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Make sparc64 compilable with clang
- Replace one-element array with flexible array member
* tag 'sparc-for-6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc/vdso: Add helper function for 64-bit right shift on 32-bit target
sparc: Replace one-element array with flexible array member
sparc/build: Add SPARC target flags for compiling with clang
sparc/build: Put usage of -fcall-used* flags behind cc-option
- Fix htmldocs errors in sysfs-bus-event_source-devices-vpa-pmu
- Fix warning due to missing #size-cells on powermac
Thanks to: Michael Ellerman, Yang Li, Rob Herring, Stephen Rothwell.
-----BEGIN PGP SIGNATURE-----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=/iVL
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix htmldocs errors in sysfs-bus-event_source-devices-vpa-pmu
- Fix warning due to missing #size-cells on powermac
Thanks to Michael Ellerman, Yang Li, Rob Herring, and Stephen Rothwell.
* tag 'powerpc-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/prom_init: Fixup missing powermac #size-cells
docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Fix htmldocs errors
powerpc/machdep: Remove duplicated include in svm.c
- Add trace flag for NEED_RESCHED_LAZY
Now that NEED_RESCHED_LAZY is upstream, add it to the status bits of the
common_flags. This will now show when the NEED_RESCHED_LAZY flag is set that
is used for debugging latency issues in the kernel via a trace.
- Remove leftover "__idx" variable when SRCU was removed from the tracepoint
code
- Add rcu_tasks_trace guard
To add a guard() around the tracepoint code, a rcu_tasks_trace guard needs
to be created first.
- Remove __DO_TRACE() macro and just call __DO_TRACE_CALL() directly
The DO_TRACE() macro has conditional locking depending on what was passed
into the macro parameters. As the guts of the macro has been moved to
__DO_TRACE_CALL() to handle static call logic, there's no reason to keep
the __DO_TRACE() macro around. It is better to just do the locking in
place without the conditionals and call __DO_TRACE_CALL() from those
locations. The "cond" passed in can also be moved out of that macro.
This simplifies the code.
- Remove the "cond" from the system call tracepoint macros
The "cond" variable was added to allow some tracepoints to check a
condition within the static_branch (jump/nop) logic. The system calls do
not need this. Removing it simplifies the code.
- Replace scoped_guard() with just guard() in the tracepoint logic
guard() works just as well as scoped_guard() in the tracepoint logic and
the scoped_guard() causes some issues.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ0dGmBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsZkAP9cm2psIGp2n1BgVjA+0tBRQJUnexEG
RualDkF5wAETLwD9FNFI/EUwDR/E8gNt0SY309EJZ1ijRiLjtU0spbQmdgs=
=awid
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing updates from Steven Rostedt:
- Add trace flag for NEED_RESCHED_LAZY
Now that NEED_RESCHED_LAZY is upstream, add it to the status bits of
the common_flags. This will now show when the NEED_RESCHED_LAZY flag
is set that is used for debugging latency issues in the kernel via a
trace.
- Remove leftover "__idx" variable when SRCU was removed from the
tracepoint code
- Add rcu_tasks_trace guard
To add a guard() around the tracepoint code, a rcu_tasks_trace guard
needs to be created first.
- Remove __DO_TRACE() macro and just call __DO_TRACE_CALL() directly
The DO_TRACE() macro has conditional locking depending on what was
passed into the macro parameters. As the guts of the macro has been
moved to __DO_TRACE_CALL() to handle static call logic, there's no
reason to keep the __DO_TRACE() macro around.
It is better to just do the locking in place without the conditionals
and call __DO_TRACE_CALL() from those locations. The "cond" passed in
can also be moved out of that macro. This simplifies the code.
- Remove the "cond" from the system call tracepoint macros
The "cond" variable was added to allow some tracepoints to check a
condition within the static_branch (jump/nop) logic. The system calls
do not need this. Removing it simplifies the code.
- Replace scoped_guard() with just guard() in the tracepoint logic
guard() works just as well as scoped_guard() in the tracepoint logic
and the scoped_guard() causes some issues.
* tag 'trace-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use guard() rather than scoped_guard()
tracing: Remove cond argument from __DECLARE_TRACE_SYSCALL
tracing: Remove conditional locking from __DO_TRACE()
rcupdate_trace: Define rcu_tasks_trace lock guard
tracing: Remove __idx variable from __DO_TRACE
tracing: Move it_func[0] comment to the relevant context
tracing: Record task flag NEED_RESCHED_LAZY.
A couple of fixes that came in during the merge window, plus
documetation of a new device ID for the Qualcomm LABIBB driver. There's
a core fix for the rarely used current constraints and a fix for the
Qualcomm RPMH driver which had described only one of the two voltage
ranges that the hardware could control, creating a potential
incompatibility with the configuration left by firmware.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdIcWQACgkQJNaLcl1U
h9DfPAf/T/w7ZNWOR52sK8et3itHVVu3YSxB92fMz/CdesUgApi2Q6Py/gw1sduQ
mY6vUd3aLkTI1Qi+XifeoRKOdRud0GRcgVILdg0J/KgzJ7EXEJ4pxE+uLE6Etuop
TGD9CY/rsX92vk9aOSPBPXfNtYB8JfBH4EgJSmHYl3V3kNe1jA32IbGUOVahA+vW
r9M1M40fuE6AsvfX47oN2mird9HyRjTRwwtrMzR8pqq3AZ8CRpPhngaxVpotmGOZ
UEaJj83WXKtja9iezYTQYmhj9yfw/c7A4UdqUFjAeScRHYxl3U+kue8MpjND1DQZ
kQfsgFoYLN6CTBhnognp1oyovixztQ==
=Lhu/
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, plus
documetation of a new device ID for the Qualcomm LABIBB driver.
There's a core fix for the rarely used current constraints and a fix
for the Qualcomm RPMH driver which had described only one of the two
voltage ranges that the hardware could control, creating a potential
incompatibility with the configuration left by firmware"
* tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Ignore unset max_uA constraints in current limit check
dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator
regulator: qcom-rpmh: Update ranges for FTSMPS525
* power-supply core
- replace power_supply_register_no_ws() with power_supply_register() and a
new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
* power-supply drivers
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc. small cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=vpkz
-----END PGP SIGNATURE-----
Merge tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- replace power_supply_register_no_ws() with power_supply_register()
and a new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
Power-supply drivers:
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc small cleanups and fixes"
* tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
power: reset: ep93xx: add AUXILIARY_BUS dependency
dt-bindings: power: reset: Convert mode-.* properties to array
power: supply: sc27xx: Fix battery detect GPIO probe
dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio
reset: keystone-reset: remove unused macros
power: supply: axp20x_battery: Use scaled iio_read_channel
power: supply: axp20x_usb_power: Use scaled iio_read_channel
power: supply: generic-adc-battery: change my gmail
power: supply: pmu_battery: Set power supply type to BATTERY
power: Switch back to struct platform_driver::remove()
power: supply: hwmon: move interface to private header
power: supply: rk817: Update battery capacity calibration
power: supply: rk817: stop updating info in suspend
power: supply: rt9471: Use IC status regfield to report real charger status
power: supply: rt9471: Fix wrong WDT function regfield declaration
dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example
power: supply: core: mark attribute arrays as ro_after_init
power: supply: core: unexport power_supply_property_is_writeable()
power: supply: core: use device mutex wrappers
power: supply: bq27xxx: Fix registers of bq27426
...
A pile of driver specific quirks and fixes that came in since the merge
window. One of the AMD fixes is a bit broken for some systems, I'm
expecting an incremental change to fix that but it seems better overall
to merge the rest of the fixes.
There's also one small documentation update that seemed sensible to
apply now, pointing to the dapm-graph tool.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdIbcgACgkQJNaLcl1U
h9DlTgf7BxJR5q38fnk2XxOr8CF8qngDgL+KTPmUqVFNTv8R8wypMaQ0IV4dxkHn
YB4ABuGkXnSiJml4cBXaPq+l+xU8wp3QM8GY+EwmXJApDGJ9dzDJI2S0m/+VrYm3
ZIHNKrwXu/f0KB5HMSPmg0gsuCi88Y89GcFqeI0+F2fnFjv87VmyFktbE5Qy7pNa
OQVoGuGHel7CYEW0arOXs/lbhSrYRiSzEr2fR9l1Yx6HbIyt/c1nDzWbJar6emYw
gDeyUETJtOEg1FqkFmjCFLIhZMVReoyA/VJ+OzaBn8CjHr2HLecl5zbZVoG3id4l
f9JhcMD+5Q19u9ijDYUdn9JgR9AhTw==
=/CdR
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.13-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A pile of driver specific quirks and fixes that came in since the merge
window. One of the AMD fixes is a bit broken for some systems, I'm
expecting an incremental change to fix that but it seems better overall
to merge the rest of the fixes.
There's also one small documentation update that seemed sensible to
apply now, pointing to the dapm-graph tool.
Fix typos and grammar where it improves readability.
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20241124230002.56058-1-leocstone@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Unless an explicit O= option is provided, external module builds must
start from the kernel directory.
This can be achieved by using the -C option:
$ make -C /path/to/kernel M=/path/to/external/module
This commit allows starting external module builds from any directory,
so you can also do the following:
$ make -f /path/to/kernel/Makefile M=/path/to/external/module
The key difference is that the -C option changes the working directory
and parses the Makefile located there, while the -f option only
specifies the Makefile to use.
As shown in the examples in Documentation/kbuild/modules.rst, external
modules usually have a wrapper Makefile that allows you to build them
without specifying any make arguments. The Makefile typically contains
a rule as follows:
KDIR ?= /path/to/kernel
default:
$(MAKE) -C $(KDIR) M=$(CURDIR) $(MAKECMDGOALS)
The log will appear as follows:
$ make
make -C /path/to/kernel M=/path/to/external/module
make[1]: Entering directory '/path/to/kernel'
make[2]: Entering directory '/path/to/external/module'
CC [M] helloworld.o
MODPOST Module.symvers
CC [M] helloworld.mod.o
CC [M] .module-common.o
LD [M] helloworld.ko
make[2]: Leaving directory '/path/to/external/module'
make[1]: Leaving directory '/path/to/kernel'
This changes the working directory twice because the -C option first
switches to the kernel directory, and then Kbuild internally recurses
back to the external module directory.
With this commit, the wrapper Makefile can directly include the kernel
Makefile:
KDIR ?= /path/to/kernel
export KBUILD_EXTMOD := $(realpath $(dir $(lastword $(MAKEFILE_LIST))))
include $(KDIR)/Makefile
This avoids unnecessary sub-make invocations:
$ make
CC [M] helloworld.o
MODPOST Module.symvers
CC [M] helloworld.mod.o
CC [M] .module-common.o
LD [M] helloworld.ko
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
