Some clock branches require inverted logic for memory gating, where
disabling the memory involves setting a bit and enabling it involves
clearing the same bit. This behavior differs from the standard approach
memory branch clocks ops where enabling typically sets the bit.
The mem_enable_invert to allow conditional handling of these sequences
of the inverted control logic for memory operations required on those
memory clock branches.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-3-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ECPRI clock controller’s mem_ops clocks used the mem_enable_ack_mask
directly for both setting and polling.
Add the newly introduced 'mem_enable_mask' to the memory control branch
clocks of ECPRI clock controller to align to the new mem_ops handling.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-2-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce mem_enable_mask and mem_enable_invert in clk_mem_branch to
describe memory gating implementations that use a separate mask and/or
inverted enable logic. This documents hardware behavior in data instead
of code and will be used by upcoming platform descriptions.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-1-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add offset for display subsystem reset in multimedia clock controller
block, which is necessary to reset display when there is some
configuration in display controller left by previous stock (Android)
bootloader to provide continuous splash functionaluty.
Before 6.17 power domains were turned off for long enough to clear
registers, now this is not the case and a proper reset is needed to
have functioning display.
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251116-sdm660-mdss-reset-v2-2-6219bec0a97f@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Both the IPQ_APSS_5424 and IPQ_APSS_6018 symbols are using the same
prompt which complicates to see that which option corresponds to which
driver.
Add a prefix to both prompts to make it easier to differentiate the
two options.
While at it, also fix a typo in the help text of the IPQ_APSS_5424
symbol.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20251113-clk-qcom-apss-ipq-prompt-v1-1-b62cf2142609@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update the register offsets for all the clock ref branches to match the
new address mapping in the TCSR subsystem.
Fixes: 2c1d6ce4f3 ("clk: qcom: Add TCSR clock driver for Glymur SoC")
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-tcsrcc_glymur-v1-1-0efb031f0ac5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix "gcc_sdcc2_apps_clk_src: rcg didn't update its configuration" during
boot. This happens due to the floor_ops tries to update the rcg
configuration even if the clock is not enabled.
The shared_floor_ops ensures that the RCG is safely parked and the new
parent configuration is cached in the parked_cfg when the clock is off.
Ensure to use the ops for the other SDCC clock instances as well.
Fixes: 39d6dcf67f ("clk: qcom: gcc: Add support for QCS615 GCC clocks")
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251029-sdcc_rcg2_shared_ops-v3-1-ecf47d9601d1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 'Agera' PLLs (with clk_agera_pll_configure) do not take some of the
parameters that are provided in the vendor driver. Instead the upstream
configuration should provide the final user_ctl value that is written to
the USER_CTL register.
Fix the config so that the PLL is configured correctly.
Fixes: 9f0532da42 ("clk: qcom: Add Camera Clock Controller driver for SM7150")
Suggested-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251021-agera-pll-fixups-v1-2-8c1d8aff4afc@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 'Agera' PLLs (with clk_agera_pll_configure) do not take some of the
parameters that are provided in the vendor driver. Instead the upstream
configuration should provide the final user_ctl value that is written to
the USER_CTL register.
Fix the config so that the PLL is configured correctly, and fixes
CAMCC_MCLK* being stuck off.
Fixes: 80f5451d9a ("clk: qcom: Add camera clock controller driver for SM6350")
Suggested-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251021-agera-pll-fixups-v1-1-8c1d8aff4afc@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
NSS (Network Subsystem) clock controller provides the clocks and resets
to the networking hardware blocks of the IPQ5424 SoC.
The icc-clk framework is used to enable NoC related clocks to create
paths so that the networking blocks can connect to these NoCs.
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-8-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clock gpll0_out_aux acts as the parent clock for some of the NSS
(Network Subsystem) clocks.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-6-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add NSS NoC clocks using the icc-clk framework to create interconnect
paths. The network subsystem (NSS) can be connected to these NoCs.
Additionally, add the LPASS CNOC and SNOC nodes to establish the complete
interconnect path.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-4-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update to use the expected icc_first_node_id for registering the icc
clocks, ensuring correct association of clocks with interconnect nodes.
Fixes: 170f3d2c06 ("clk: qcom: ipq5424: Use icc-clk for enabling NoC related clocks")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-1-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB4 HPG says this frequency remains unused, remove it from the
frequency table to avoid any misunderstandings.
The reason it's unused seems to be that the lower RPMh level required
to support it (LOW_SVS) is not enough for other pieces of the pipeline
which require SVS, which in turn is enough to support a faster, 175-ish
MHz rate.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251010-topic-gcc_usb4_unused_freq-v1-3-4be5e77d2307@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB4 HPG says this frequency remains unused, remove it from the
frequency table to avoid any misunderstandings.
The reason it's unused seems to be that the lower RPMh level required
to support it (LOW_SVS) is not enough for other pieces of the pipeline
which require SVS, which in turn is enough to support a faster, 175 MHz
rate.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251010-topic-gcc_usb4_unused_freq-v1-2-4be5e77d2307@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB4 HPG says this frequency remains unused, remove it from the
frequency table to avoid any misunderstandings.
The reason it's unused seems to be that the lower RPMh level required
to support it (LOW_SVS) is not enough for other pieces of the pipeline
which require SVS, which in turn is enough to support a faster, 175 MHz
rate.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251010-topic-gcc_usb4_unused_freq-v1-1-4be5e77d2307@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It is possible to select CONFIG_SM_GCC_6350 when targeting ARCH=arm,
causing a Kconfig warning when selecting CONFIG_SM_GCC_6350 without
its dependencies, CONFIG_ARM64 or CONFIG_COMPILE_TEST.
WARNING: unmet direct dependencies detected for SM_GCC_6350
Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=m] && (ARM64 || COMPILE_TEST [=n])
Selected by [m]:
- SM_VIDEOCC_6350 [=m] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=m]
Add the same dependency to clear up the warning.
Cc: stable@vger.kernel.org
Fixes: 720b1e8f20 ("clk: qcom: Add video clock controller driver for SM6350")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250930-clk-qcom-kconfig-fixes-arm-v1-1-15ae1ae9ec9f@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The pipe clocks for PCIE and USB are externally sourced and they should
not be polled by the clock driver. Update the halt_check flags to 'SKIP'
to disable polling for these clocks.
This helps avoid the clock status stuck at 'off' warnings, which are
benign, since all consumers of the PHYs must initialize a given instance
before performing any operations.
Fixes: efe504300a ("clk: qcom: gcc: Add support for Global Clock Controller")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250925-glymur_gcc_usb_fixes-v2-1-ee4619571efe@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SD card support requires a 37.5MHz clock; add it to the frequency
list for the storage SW driver to be able to request for the frequency.
Fixes: 3267c774f3 ("clk: qcom: Add support for GCC on SM8750")
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250924-sm8750_gcc_sdcc2_frequency-v1-1-541fd321125f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Set CLK_OPS_PARENT_ENABLE to ensure the parent gets prepared and enabled
when switching to it, fixing an "rcg didn't update its configuration"
warning.
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250919-sm7150-dispcc-fixes-v1-3-308ad47c5fce@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the offsets for two resets inside the dispcc on SM6350 SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250919-sm6350-mdss-reset-v1-2-48dcac917c73@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This was previously (mis)represented in the interconnect driver, move
the resource under the clk-rpmh driver control, just like we did for
all platforms in the past, see e.g. Commit aa055bf158 ("clk: qcom:
rpmh: define IPA clocks where required")
Fixes: 42a1905a10 ("clk: qcom: rpmhcc: Add support for QCS615 Clocks")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250627-topic-qcs615_icc_ipa-v1-4-dc47596cde69@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
other GDSC power domains provided by the SM8450 camera clock controller,
including IPE, BPS and SBI ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-7-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
other GDSC power domains provided by the SM8250 camera clock controller,
including IPE, BPS and SBI ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-6-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
other GDSC power domains provided by the SM7150 camera clock controller,
including IPE0/1 and BPS ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-5-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be properly described in the power domain provider driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
other GDSC power domains provided by the SDM845 camera clock controller,
including IPE0/1 and BPS ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-4-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
all other GDSC power domains provided by the SM6350 camera clock controller
to enforce a correct sequence of enabling and disabling power domains by
the consumers, this fixes the CAMCC as a supplier of power domains to CAMSS
IP and its driver.
Fixes: 80f5451d9a ("clk: qcom: Add camera clock controller driver for SM6350")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
all other GDSC power domains provided by the SM8550 camera clock controller
to enforce a correct sequence of enabling and disabling power domains by
the consumers, this fixes the CAMCC as a supplier of power domains to CAMSS
IP and its driver.
Fixes: ccc4e6a061 ("clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently, some of the USB4 clocks/resets are described, but not all
of the back-end muxes are present. Configuring them properly is
necessary for proper operation of the hardware.
Add all the resets & muxes and wire up any unaccounted USB4 clock paths.
Fixes: 161b7c401f ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251003-topic-hamoa_gcc_usb4-v2-2-61d27a14ee65@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
struct clk_ops::determine_rate() instead of the round_rate() one so that we can
remove the round_rate clk_op entirely. Brian has taken up that task which
nobody else has wanted to do for close to a decade. Thanks Brian! This is all
prerequisite work to get to the real task of improving the clk rate setting
process. Once we have determine_rate() used everywhere, we'll be able to do
things like chain the rate request structs in linked lists to order the rate
setting operations or add more parameters without having to change every clk
driver in existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad this is
getting done.
Beyond this change we also have a tweak to the clk_lookup() function in the
core framework to use hashing on the clk name instead of a clk tree walk with
string comparisons. We _still_ rely on the clk name to be unique, because
historically we've used globally unique strings to describe the clk tree
topology. This tree walk becomes increasingly slow as more clks are added to
the system. Searching from the roots for a duplicate is simple but pretty dumb
and it wastes boot time so we're using a hash table as an improvement. Ideally
we wouldn't rely on the strings to be unique at all, relegating them to simply
debug information, but that is future work that will likely require some sort
of Kconfig knob indicating strings aren't used for topology description.
Outside of the core framework changes we have the usual new SoC support and
fixes to clk drivers for things that were discovered once the clks were used by
consumer drivers. Nothing in particular is jumping out at me in the "misc"
pile, except maybe the Amlogic driver that has gone through a refactoring. That
series got a fix from testing in -next though so it seems likely that things
have been getting good test coverage for a couple weeks already.
-----BEGIN PGP SIGNATURE-----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=fjY4
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
* clk-determine-rate: (120 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: scmi: migrate round_rate() to determine_rate()
clk: ti: fapll: convert from round_rate() to determine_rate()
clk: ti: dra7-atl: convert from round_rate() to determine_rate()
clk: ti: divider: convert from round_rate() to determine_rate()
clk: ti: composite: convert from round_rate() to determine_rate()
clk: ti: dpll: convert from round_rate() to determine_rate()
clk: ti: dpll: change error return from ~0 to -EINVAL
clk: ti: dpll: remove round_rate() in favor of determine_rate()
clk: tegra: tegra210-emc: convert from round_rate() to determine_rate()
clk: tegra: super: convert from round_rate() to determine_rate()
clk: tegra: pll: convert from round_rate() to determine_rate()
clk: tegra: periph: divider: convert from round_rate() to determine_rate()
clk: tegra: divider: convert from round_rate() to determine_rate()
clk: tegra: audio-sync: convert from round_rate() to determine_rate()
clk: fixed-factor: drop round_rate() clk ops
clk: divider: remove round_rate() in favor of determine_rate()
clk: visconti: pll: convert from round_rate() to determine_rate()
clk: versatile: vexpress-osc: convert from round_rate() to determine_rate()
...
- Speed up clk_core_lookup() by using a hashtable
* clk-microchip:
ARM: at91: remove default values for PMC_PLL_ACR
clk: at91: add ACR in all PLL settings
clk: at91: sam9x7: Add peripheral clock id for pmecc
clk: at91: clk-master: Add check for divide by 3
clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register
ARM: at91: pm: save and restore ACR during PLL disable/enable
* clk-lookup:
clk: Use hashtable for global clk lookups
clk: Sort include statements
* clk-st:
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
Second set of RISC-V updates for the v6.18 merge window, consisting
of:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its
use cases is to enable M-mode firmware to act as a single RPMI client
for all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
This PR also includes a recent, one-line Kconfig patch from Geert to
keep non-RISC-V users from being asked about building the RPMI virtual
clock driver when !COMPILE_TEST. THere's nothing preventing
non-RISC-V SoCs from implementing RPMI, but until some users show up,
let's not annoy others with it.
-----BEGIN PGP SIGNATURE-----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=Ys1m
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its use
cases is to enable M-mode firmware to act as a single RPMI client for
all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
clk: COMMON_CLK_RPMI should depend on RISCV
ACPI: support BGRT table on RISC-V
MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
irqchip/riscv-rpmi-sysmsi: Add ACPI support
mailbox/riscv-sbi-mpxy: Add ACPI support
irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
ACPI: RISC-V: Add RPMI System MSI to GSI mapping
ACPI: RISC-V: Add support to update gsi range
ACPI: RISC-V: Create interrupt controller list in sorted order
ACPI: scan: Update honor list for RPMI System MSI
ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
irqchip: Add driver for the RPMI system MSI service group
dt-bindings: Add RPMI system MSI interrupt controller bindings
dt-bindings: Add RPMI system MSI message proxy bindings
clk: Add clock driver for the RISC-V RPMI clock service group
dt-bindings: clock: Add RPMI clock service controller bindings
dt-bindings: clock: Add RPMI clock service message proxy bindings
mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
...
The RISC-V platform management interface (RPMI) is only available on
RISC-V platforms. Hence add a dependency on RISCV, to prevent asking
the user about this driver when configuring a kernel for a different
architecture.
Fixes: 5ba9f520f4 ("clk: Add clock driver for the RISC-V RPMI clock service group")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Lots of platform specific updates for Qualcomm SoCs, including a
new TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with the
M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed, Broadcom,
Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0.
-----BEGIN PGP SIGNATURE-----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=mcZR
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation of
high-end workstations and laptops from Apple. Linux has been working
on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that
was part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences
being mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial bedded
SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and Axis
ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon
X1 chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into
improving hardware support on the existing machines and cleaning
up contents for validation.
-----BEGIN PGP SIGNATURE-----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=9OtD
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older
chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
of high-end workstations and laptops from Apple. Linux has been
working on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that was
part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences being
mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
bedded SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and
Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into improving
hardware support on the existing machines and cleaning up contents for
validation"
* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
ARM: dts: microchip: sam9x7: Add qspi controller
arm64: dts: qcom: Add MST pixel streams for displayport
arm64: dts: qcom: sm6350: correct DP compatibility strings
arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
arm64: dts: allwinner: h313: Add Amediatech X96Q
dt-bindings: arm: sunxi: Add Amediatech X96Q
arm64: dts: apple: t8015: Add SPMI node
arm64: dts: apple: t8012: Add SPMI node
arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
arm64: dts: rockchip: update pinctrl names for Radxa E52C
arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
arm64: dts: apple: Add J474s, J475c and J475d device trees
arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
...
Fix compiler error caused by the round_rate() to determine_rate()
migration.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509280327.jsapR0Ww-lkp@intel.com/
Signed-off-by: Brian Masney <bmasney@redhat.com>
Fixes: e9f039c08c ("clk: microchip: core: convert from round_rate() to determine_rate()")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The RPMI specification defines a clock service group which can be
accessed via SBI MPXY extension or dedicated S-mode RPMI transport.
Add mailbox client based clock driver for the RISC-V RPMI clock
service group.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Link: https://lore.kernel.org/r/20250818040920.272664-11-apatel@ventanamicro.com
[pjw@kernel.org: converted rpmi_clkrate_u64 macro to a function; replaced bare constant with a macro]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The sp7021 clock driver has its own shifted high word mask macro,
similar to the ones many Rockchip drivers have.
Remove it, and replace instances of it with hw_bitfield.h's
FIELD_PREP_WM16 macro, which does the same thing except in a common
macro that also does compile-time error checking.
This was compile-tested with 32-bit ARM with Clang, no runtime tests
were performed as I lack the hardware. However, I verified that fix
commit 5c667d5a5a ("clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()")
is not regressed. No warning is produced.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
struct tegra_bpmp::clocks is a pointer to a dynamically allocated array
of pointers to 'struct tegra_bpmp_clk'.
But the size of the allocated area is calculated like it is an array
containing actual 'struct tegra_bpmp_clk' objects - it's not true, there
are just pointers.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: 2db12b15c6 ("clk: tegra: Register clocks from root to leaf")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>