Nothing in this file splices a socket whose last decrypt failed, so
the check that fails tls_sw_splice_read() on a broken connection can
be removed without a test noticing. Such a splice hands the
application plaintext that recvmsg() and read_sock() already refuse
to return.
Extend the bad_auth pattern. Corrupt an authenticated record, confirm
recvmsg() reports EBADMSG, then splice the same socket and require
EBADMSG again. A synchronous decrypt fails again on the still-queued
record, so only an async decrypt reaches EBADMSG through the
recorded-failure check alone.
bad_auth builds the same corrupted record, so its construction moves
into a helper the two tests share.
Signed-off-by: Chuck Lever <cel@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260806-tls-splice-crypto-fix-v1-2-a2624005a286@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When an async decrypt fails, tls_decrypt_done() records the error in
ctx->async_wait.err and calls tls_err_abort(), which stores it in
sk_err. tls_sw_recvmsg() and tls_sw_read_sock() each read
async_wait.err once they hold the reader lock and fail the call: a
record that did not authenticate breaks the connection.
tls_sw_splice_read() has no such check, and sk_err does not stand in
for one. tls_rx_rec_wait() tests sk_err only inside the loop it
skips whenever a record is already parsed, and the first reader to
reach sock_error() clears it, while async_wait.err persists. A
splice therefore keeps delivering records on a connection that
recvmsg() and read_sock() refuse to read.
Read async_wait.err in tls_sw_splice_read() as the other two readers
do.
Fixes: f314bfee81 ("tls: rx: return the already-copied data on crypto error")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Chuck Lever <cel@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260806-tls-splice-crypto-fix-v1-1-a2624005a286@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
'select' does not work on config options in a 'choice', so currently the
'select VIRT_CPU_ACCOUNTING_GEN' for NO_HZ_FULL is dead, with the choice
option VIRT_CPU_ACCOUNTING_GEN only being enabled when NO_HZ_FULL=y because
the other choice members depend on NO_HZ_FULL=n.
Remove the dead select, and encode this relationship as a default of the
choice, instead.
This dead select was found by kconfirm, a static analysis tool for Kconfig.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Bradley Morgan <include@grrlz.net>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260801160140.2391000-1-julianbraha@gmail.com
Currently, when exiting to kernel mode, we attempt involuntary
preemption. The preemption logic expects IRQs to be disabled, which is
why we call local_irq_disable() before attempting preemption.
However, depending on the context, local_irq_disable() may be
unnecessary:
- __el1_irq(), the non-NMI EL1 IRQ path, already has IRQs disabled, so
local_irq_disable() is redundant.
- irqentry_exit_to_kernel_mode_preempt() immediately returns when
exiting from an NMI-like context, so calling local_irq_disable()
beforehand is unnecessary work.
Furthermore, it confuses the pNMI state tracking when we are in a
context with interrupts disabled and the GIC_PRIO_PSR_I_SET bit is set
in the PMR, leading to a warning when
CONFIG_ARM64_DEBUG_PRIORITY_MASKING=y:
WARNING: ./arch/arm64/include/asm/irqflags.h:63 at arm64_exit_to_kernel_mode+0xb8/0xc0, CPU#40: retsnoop/31805
CPU: 40 UID: 0 PID: 31805 Comm: retsnoop Not tainted 7.2.0-rc6-next-20260805 #7 PREEMPTLAZY
pstate: 234013c9 (nzCv DAIF +PAN -UAO +TCO +DIT +SSBS BTYPE=--)
pc : arm64_exit_to_kernel_mode (arch/arm64/kernel/entry-common.c:63)
lr : el1_abort (arch/arm64/kernel/entry-common.c:323)
pmr: 000000f0
Call trace:
arm64_exit_to_kernel_mode (arch/arm64/kernel/entry-common.c:63) (P)
el1_abort (arch/arm64/kernel/entry-common.c:323)
el1h_64_sync_handler (arch/arm64/kernel/entry-common.c:449)
el1h_64_sync (arch/arm64/kernel/entry.S:589)
[...]
Split arm64_exit_to_kernel_mode() into preempt, non-preempt, and
dispatch parts so that we can avoid this extra work where it is not
needed and avoid breaking the pNMI tracking logic.
Reported-by: Breno Leitao <leitao@debian.org>
Fixes: ae654112ea ("arm64: entry: Use split preemption logic")
Link: https://lore.kernel.org/all/20260807-arm64_fix-v1-1-d069ccf9d71b@debian.org/
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
`gic_arch_enable_irqs()` is only used when handling IRQs (which could
be pseudo-NMIs) and unmasking pseudo-NMIs.
The chain of `gic_pmr_mask_irqs()` and `gic_arch_enable_irqs()` for it
is slightly confusing without further explanation.
Remove `gic_arch_enable_irqs()` and instead do the whole pseudo-NMI
umasking in `gic_unmask_pnmis()`, making the operation explicit.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
In non-MSI-X mode (such as legacy INTx or single MSI), wx->msix_entry is
not allocated or initialized. Calling NGBE_INTR_MISC(wx) dereferences
wx->msix_entry->entry, leading to a NULL pointer dereference crash.
This issue was introduced by fixing the IRQ vector when the number of
VFs is 7. Fix the issue by explicitly checking `pdev->msix_enabled` to
determine the correct vector index.
Additionally, as a side fix, set the interrupt mask to BIT(0) for the
non-MSI-X fallback. In MSI/INTx mode, the MISC and queue interrupts
share vector 0, and the WX_PX_MISC_IVAR register is only valid in the
MSI-X case. Thus, BIT(0) is the correct mask for the miscellaneous cause
when MSI-X is disabled.
Fixes: 4174c0c331 ("net: ngbe: specify IRQ vector when the number of VFs is 7")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/B2693E9A8BFAD110+20260807062214.410838-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wei Fang says:
====================
Fix wrong transport_header when sending VLAN-tagged frames
When sending a VLAN-tagged frame via AF_PACKET or tap, calling
skb_set_network_header() before skb_probe_transport_header() causes
the flow dissector to misinterpret the inner protocol header as a
VLAN header. As a result, transport_header is never set and remains
at its uninitialized sentinel value (~0U).
Move skb_probe_transport_header() to before skb_set_network_header()
so the flow dissector sees network_header still pointing to the VLAN
header and can correctly identify the transport layer.
====================
Link: https://patch.msgid.link/20260807063405.688780-1-wei.fang@oss.nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In tap_get_user_xdp(), when processing a VLAN-tagged frame (e.g.
ETH_P_8021Q), skb_set_network_header() is called first to advance
network_header past the VLAN tag to the inner protocol header.
skb_probe_transport_header() is then called with skb->protocol still
set to ETH_P_8021Q, while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.
In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at the current nhoff via __skb_header_pointer(),
but that offset contains the inner protocol header (e.g. an IP header).
The bytes are misinterpreted as a VLAN header, yielding a garbage
encapsulated EtherType that matches no known protocol. The dissector
returns false, so skb_probe_transport_header() never calls
skb_set_transport_header(), leaving transport_header at its uninitialized
sentinel value (~0U).
Move skb_set_network_header() to after skb_probe_transport_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header (offset ETH_HLEN), so nhoff is correct and the
flow dissector can parse the VLAN header, extract the inner EtherType,
and advance nhoff to the inner protocol header, allowing transport_header
to be set correctly.
Fixes: 8c76e77f90 ("tap: call skb_probe_transport_header after setting skb->dev")
Assisted-by: WChat:claude-opus-4-8
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260807063405.688780-3-wei.fang@oss.nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In packet_parse_headers(), when processing a VLAN-tagged frame,
skb_set_network_header() is called to advance network_header past the
VLAN tag to the inner protocol header. skb_probe_transport_header() is
then called with skb->protocol still set to the outer VLAN EtherType
(e.g. ETH_P_8021Q), while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.
In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at nhoff via __skb_header_pointer(), but that
offset contains the inner protocol header (e.g. an IP header). The bytes
are misinterpreted as a VLAN header, yielding a garbage encapsulated
EtherType that matches no known protocol. The dissector returns false,
so skb_probe_transport_header() never calls skb_set_transport_header(),
leaving transport_header at its uninitialized sentinel value (~0U).
Move skb_probe_transport_header() to before skb_set_network_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header, so nhoff correctly points to the VLAN header.
The flow dissector can then parse the VLAN header, extract the inner
EtherType, and advance nhoff to the inner protocol header, allowing
transport_header to be set correctly.
Fixes: dfed913e8b ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO")
Assisted-by: WChat:claude-opus-4-8
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260807063405.688780-2-wei.fang@oss.nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
MXC and MMCX were initially omitted as they were believed to have no
consumers, and they were not present downstream either.
The Iris video codec requires these power domains, so add MXC and MMCX
along with the MXC_AO and MMCX_AO.
Fixes: f387ecdd49 ("pmdomain: qcom: rpmhpd: Add Eliza RPMh Power Domains")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
vxlan_changelink() arms vxlan->age_timer whenever the requested ageing
interval differs from the configured one:
if (conf.age_interval != vxlan->cfg.age_interval)
mod_timer(&vxlan->age_timer, jiffies);
There is no netif_running() test, so the timer is armed even on a device
that was never brought up. The only synchronous cancel in the driver is
the timer_delete_sync() in vxlan_stop(), which is .ndo_stop.
netif_close_many() drops devices without IFF_UP before
__dev_close_many() runs, so that cancel is skipped for such a device.
vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a
member of struct vxlan_dev, so free_netdev() releases the allocation the
timer lives in while it is still queued on a timer_base.
expire_timers() unlinks the entry before it loads timer->function, so
the timer core writes through the freed object's list pointers:
BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654
Write of size 8 at addr ffff00001adace68 by task true/192
__asan_store8+0x84/0xac
__run_timers+0x208/0x654
run_timer_softirq+0x154/0x18c
Allocated by task 189:
alloc_netdev_mqs+0x64/0x720
rtnl_create_link+0x4ac/0x520
rtnl_newlink+0x758/0xd00
Freed by task 191:
netdev_release+0x40/0x58
netdev_run_todo+0x4a4/0x8c0
rtnl_dellink+0x200/0x4e8
The rtnl operations involved are netns-scoped, so an unprivileged user
can perform them in a new user and network namespace.
Arming the timer on a down device never had an effect: vxlan_cleanup()
returns early on !netif_running(), and vxlan_open() arms the timer for
any non-zero interval once the device is brought up. Add the missing
test.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 40051c4dca ("vxlan: Allow changing ageing time")
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260809111829.78834-1-baul.lee@xbow.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add `shr_exact` in the vein of `try_shrink` which shifts a bounded right
only if it loses no set bits. This is useful for getting a shifted down
integer while simultaneously checking that it's aligned.
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260810-pramin-split-v2-3-65a00b3c7309@nvidia.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Make `shr` reject shifts of at least the type's bit width at build
time, instead of panicking or masking the shift amount at runtime.
[ This implies we can break the type invariant, which in turn means
we can trigger UB via `Deref`, e.g.:
rust_kernel: panicked at rust/kernel/num/bounded.rs:528:22:
unsafe precondition(s) violated: hint::unreachable_unchecked must never be reached
- Miguel ]
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Cc: stable@vger.kernel.org
Fixes: c59a2d14cd ("rust: num: add `shr` and `shl` methods to `Bounded`")
Link: https://patch.msgid.link/20260810-pramin-split-v2-2-65a00b3c7309@nvidia.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
rust/uapi/uapi_helper.h was directly including <uapi/asm-generic/ioctl.h>
instead of the proper <uapi/linux/ioctl.h>.
On powerpc, <uapi/linux/ioctl.h> pulls in <uapi/asm/ioctl.h> first, which
defines _IOC_SIZEBITS, _IOC_DIRBITS, _IOC_NONE, and _IOC_WRITE with the
arch-specific values, before falling through to <asm-generic/ioctl.h>.
By bypassing that chain and including <asm-generic/ioctl.h> directly,
the arch-specific overrides never ran first, so when other headers in
the compilation later brought in the full arch-aware chain, Clang saw
those four macros being defined a second time and emitted:
clang diag: arch/powerpc/include/uapi/asm/ioctl.h:5:9: warning: '_IOC_SIZEBITS' macro redefined [-Wmacro-redefined]
clang diag: arch/powerpc/include/uapi/asm/ioctl.h:6:9: warning: '_IOC_DIRBITS' macro redefined [-Wmacro-redefined]
clang diag: arch/powerpc/include/uapi/asm/ioctl.h:8:9: warning: '_IOC_NONE' macro redefined [-Wmacro-redefined]
clang diag: arch/powerpc/include/uapi/asm/ioctl.h:10:9: warning: '_IOC_WRITE' macro redefined [-Wmacro-redefined]
Fix this by replacing the direct include of <uapi/asm-generic/ioctl.h>
with <uapi/linux/ioctl.h>, which is the correct arch-aware entry point
and already maintains the intended include order.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202608050618.9dekfjtF-lkp@intel.com/
Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Fixes: 4e17466568 ("rust: uapi: Add UAPI crate")
Link: https://patch.msgid.link/20260811063345.685884-1-mkchauras@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a ceiling variant, mirroring the existing as_micros_ceil() since
the existing as_millis() truncates towards zero.
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://patch.msgid.link/20260808062839.1159990-4-tomo@flapping.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a Jiffy time unit with isize as its representation and provide
Delta<Jiffy>::from_jiffies() and as_jiffies() as the unit-specific
constructor and accessor, mirroring from_nanos()/as_nanos() on the
nanosecond Delta.
Represent the jiffies span as isize: Delta is a signed span (nanoseconds
use i64) and, as a timeout, the value only needs to reach
MAX_JIFFY_OFFSET ((LONG_MAX >> 1) - 1). isize is signed and matches the
kernel's c_long, so it meets both.
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://patch.msgid.link/20260808062839.1159990-3-tomo@flapping.org
[ Added intra-doc links. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Delta hardcodes its value as i64 nanoseconds. A later patch adds a
jiffies span, whose natural representation is isize jiffies rather than
i64 nanoseconds, and a separate type per unit would duplicate the
arithmetic and comparison machinery.
Make Delta generic over its time unit so the jiffies span can reuse that
machinery. The nanosecond Delta keeps its current representation and API
via the default unit parameter, so no functional change.
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://patch.msgid.link/20260808062839.1159990-2-tomo@flapping.org
[ Reworded to remove stray word. Added intra-doc links. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but
RTNL does not serialize this walk with PMTU exception updates. The walk
uses rcu_dereference_protected() with a constant true condition without
holding fnhe_lock.
The following interleaving can therefore occur:
CPU 0 CPU 1
fib_nhc_update_mtu() update_or_create_fnhe()
load fnhe spin_lock_bh(&fnhe_lock)
fnhe_remove_oldest()
unlink fnhe
kfree_rcu(fnhe, rcu)
<quiescent state>
access fnhe after grace period
KASAN reported:
BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410
Read of size 8 at addr ffff888107d49000 by task poc/90
Call Trace:
fib_nhc_update_mtu+0x3df/0x410
fib_sync_mtu+0x7a/0xd0
fib_netdev_event+0x229/0x3f0
netif_set_mtu_ext+0x33a/0x570
dev_set_mtu+0x88/0x120
The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a
pair and other writers serialize them with fnhe_lock. RCU alone prevents
reclamation, but would still allow concurrent writers to leave a mixed
pair.
Walk the table under RCU and acquire fnhe_lock only while updating each
exception. RCU keeps the current entry alive while the short critical
section serializes its paired PMTU fields. This avoids holding the global
lock while scanning all 2048 buckets for every nexthop.
Fixes: af7d6cce53 ("net: ipv4: update fnhe_pmtu when first hop's MTU changes")
Cc: stable@vger.kernel.org
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260807181710.1178747-1-nicoyip.dev@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ntb_netdev_rx_handler() hands the received skb to the network stack
before allocating its replacement. If the allocation fails, nothing is
reposted. Every failure therefore takes one buffer out of the RX queue
while the interface remains up, and enough failures eventually stall
reception.
A retry path could refill the queue later, but ntb_netdev has none.
Allocate the replacement first instead. If that fails, drop the packet
and repost the same skb. This keeps the queue full and lets packet
delivery resume as soon as memory is available again.
Fixes: 548c237c0a ("net: Add support for NTB virtual ethernet device")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260806032537.3526498-1-den@valinux.co.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sync up the kernel and tooling headers to fix this build warning:
Warning: Kernel ABI header at 'tools/include/linux/objtool_types.h' differs from latest version at 'include/linux/objtool_types.h'
Fixes: 6e5716b187 ("objtool: Replace __ASSEMBLY__ with __ASSEMBLER__ in header files")
Cc: Thomas Huth <thuth@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In PowerPC (pseries) a non-virtualized adapter will have 2 DMA windows -
2GB default and a larger Dynamic DMA Window (DDW). DDW is large enough to
map total RAM to a device.
During normal functioning of OS, since RAM is pre-mapped, 2GB default
window is not used. The only scenario it might get used is when buffers in
pmemory are mapped to the device for DMA.
As of today, during kdump, during early device discovery, pci_dma_find()
finds that the device has 2 DMA windows. It selects to use DDW. This is a
kdump path and DMA window is needed for IO to the device.
Although commit 09a3c1e461 ("powerpc/pseries/iommu: IOMMU table is not
initialized for kdump over SR-IOV") fixed an issue during kdump with SR-IOV
case, but this also made the kdump prefer DDW over the default DMA window
when both are present (dedicated adapter case). Since the DDW is fully
mapped by the previous kernel, iommu_table_clear() can free only
KDUMP_MIN_TCE_ENTRIES (2048) TCEs for use by kdump kernel.
This is not enough when the dump device is NVMe over Fibre Channel.
Because nvme-fc driver DMA-maps the cmds and resp IUs of every
pre-allocated request and each such mapping consumes roughly:
32 (IO queues, one per cpus = nr_cpus) *
64 (queue_depth, blk-mq kdump limit) *
2 (cmd+resp) = 4096
This is already double of what we have without counting admin queues and
lpfc driver's own allocations / mapping requirement. Hence this results
into iommu_alloc failures like -
lpfc 0153:70:00.0: iommu_alloc failed,
tbl 0000000034ebcf5e vaddr 00000000d814df0b npages 1
lpfc 0153:70:00.0: FCP Op failed - cmdiu dma mapping failed.
lpfc 0153:70:00.0: iommu_alloc failed,
tbl 0000000034ebcf5e vaddr 000000009779e4d2 npages 1
lpfc 0153:70:00.0: FCP Op failed - cmdiu dma mapping failed.
iommu_map_phys+0x1c4/0x1f0 (unreliable)
dma_iommu_map_phys+0x54/0xa0
dma_map_phys+0x3f8/0x590
__nvme_fc_init_request+0x110/0x300 [nvme_fc]
nvme_fc_init_request+0x60/0xb8 [nvme_fc]
blk_mq_alloc_map_and_rqs+0x388/0x510
blk_mq_alloc_tag_set+0x2a4/0x5f0
nvme_alloc_io_tag_set+0xe0/0x1e0 [nvme_core]
nvme_fc_connect_ctrl_work+0x85c/0xdac [nvme_fc]
process_one_work+0x1e4/0x5a0
worker_thread+0x1ec/0x3e0
Increasing the number of free TCE entries in iommu_table_clear() will
increase the probability of hitting EEH since there could still be some
active IOs from the previous life of the kernel.
Hence this patch partially reverts the previous fixes commit and
switches the kdump's default back to 2GB default DMA window instead of
DDW window. This window will mostly be empty. Or, could be slightly used
if buffers in pmemory were mapped for IO.
Fixes: 09a3c1e461 ("powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV")
Cc: stable@vger.kernel.org
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260803224029.60538-1-gbatra@linux.ibm.com
Convert `use` imports to vertical layout for better readability and
maintainability.
Signed-off-by: Guru Das Srinagesh <linux@gurudas.dev>
Reviewed-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://patch.msgid.link/20260721-pwm-rust-vert-imp-v2-1-9f91547f5e07@gurudas.dev
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
All types in `bindings` implement `Zeroable` if they can, so use
`pin_init::zeroed` instead of relying on `unsafe` code.
If this ends up not compiling in the future, something in bindgen or on
the C side changed and is most likely incorrect.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1189
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com>
Link: https://patch.msgid.link/20260603160910.159307-1-laniel_francis@privacyrequired.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Before commit e3c4ff6d8c ("EDAC: Remove EDAC_MM_EDAC") EDAC_MM_EDAC
selected RAS, after that commit, EDAC depends on RAS, but nobody enables
it. Enable it in the config again.
Fixes: e3c4ff6d8c ("EDAC: Remove EDAC_MM_EDAC")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260730105546.3658570-1-mwalle@kernel.org
By using __cleanup(aes_cmac_zeroize_key) for clearing the key data, we
can save one line of code here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260807125845.1477067-6-thuth@redhat.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
In kunit_run_irq_test(), call destroy_hrtimer_on_stack() and
destroy_work_on_stack() to unregister the hrtimer and work from the
debugobjects infrastructure (when CONFIG_DEBUG_OBJECTS_TIMERS=y and
CONFIG_DEBUG_OBJECTS_WORK=y) before the function returns.
Found via code review; the lack of the unregistrations didn't actually
cause a warning, since the objects are inactive upon return anyway. But
they should be there, otherwise debugobjects keeps tracking the objects.
Fixes: 950a81224e ("lib/crypto: tests: Add hash-test-template.h and gen-hash-testvecs.py")
Reviewed-by: David Gow <david@davidgow.net>
Link: https://patch.msgid.link/20260806053804.106724-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Currently, kunit_irq_test_timer_func() stops increasing the hrtimer
interval as soon as some forward progress is made in each of softirq and
task context. Update it to use a more aggressive strategy: increase the
interval as long as the hrtimer is running significantly faster than
either context.
This resolves an occasional hang in the CRC and crypto library tests
under qemu-system-s390x. It was exposed by the change in the default
preemption model on s390 from NONE to LAZY. That seems to have exposed
the issue by allowing some forward progress to be made while the actual
system timer tick is still starved, preventing jiffies from increasing
or the task context from making much progress towards max_iterations.
Fixes: 201ceb94aa ("kunit: irq: Ensure timer doesn't fire too frequently")
Cc: stable@vger.kernel.org
Reviewed-by: David Gow <david@davidgow.net>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260803181842.44648-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a KUnit test suite for the AES-GCM library API.
It consists of:
- All the shared test cases from aead-test-template.h. These include
extensive consistency tests, a "Monte-Carlo test", and a benchmark.
- Tests against hardcoded AES-GCM test vectors from external sources.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a KUnit test suite for the AES-CCM library API.
It consists of:
- All the shared test cases from aead-test-template.h. These include
extensive consistency tests, a "Monte-Carlo test", and a benchmark.
- Tests against hardcoded AES-CCM test vectors from external sources.
- Tests for CCM-specific message length validation.
To generate the expected aes_ccm_monte_carlo_checksum[] value, add a
script gen-aead-testvecs.py which computes it using python-cryptography.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add aead-test-template.h which contains shared test logic for AEAD
algorithms. It's similar to the existing hash-test-template.h, which
contains shared test logic for hash algorithms.
The initial use cases for this will be AES-CCM and AES-GCM.
It may be used by the existing ChaCha20Poly1305 test suite in the future
as well, though the ChaCha20Poly1305 API currently lacks some of the
functionality that the "template" expects to be present.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Make the test cases more self-contained by replacing the test suite
scoped guarded buffer ('test_buf') with buffers allocated by each test
case using the helper functions in test-utils.h.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Move hash-test-template's test RNG code and the buffer allocation code
from various test suites into a header test-utils.h. This allows them
to be shared by other test suites.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Upcoming changes will wire up architecture-optimized implementations of
GCM and CCM. FIPS labs can consider such designs to meet the threshold
for separate self-tests to be needed.
Therefore, add FIPS self-tests for encryption and decryption in these
modes.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802222408.91757-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Upcoming changes will wire up architecture-optimized implementations of
ECB, CBC, CBC-CTS, CTR, and XTS. FIPS labs can consider such designs to
meet the threshold for separate self-tests to be needed.
The inverse direction of the block cipher also needs to be exercised,
which the existing CMAC self-test doesn't do.
Therefore, add FIPS self-tests for encryption and decryption in these
modes as well as the "bare" AES.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802222408.91757-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
In preparation for adding FIPS self-tests for AES encryption modes,
split fips.h into separate files for the AES and SHA test vectors.
They are still generated by the same script, but this keeps things a bit
more organized.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802222408.91757-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Code that uses AES-CMAC might need to zeroize their local aes_cmac_key
and/or aes_cmac_ctx structures after use to avoid leaking sensitive
material on the stack.
Provide an aes_cmac_zeroize_key() and an aes_cmac_zeroize_ctx() helper
function that can be used with __cleanup() to automatically clear the
key and context when they go out of scope.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260807125845.1477067-2-thuth@redhat.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a tdc case covering the leak fixed by the previous patch.
The test attaches "action ct" to a clsact ingress chain and injects ten
IPv6 frames whose nexthdr says hop-by-hop but which carry nothing after
the 40-byte header, so ipv6_find_hdr() fails and
tcf_ct_ipv6_is_fragment() returns -EPROTO.
Before the fix act_ct returned TC_ACT_CONSUMED for these packets, so
tc_run() never reached its TC_ACT_SHOT arm and the clsact drop counter
stayed at zero while the skbs leaked. After the fix the packets are
dropped properly and the counter reflects them, which is what the test
matches on:
before: Sent 476 bytes 11 pkt (dropped 0, overlimits 0 requeues 0)
after: Sent 400 bytes 10 pkt (dropped 10, overlimits 0 requeues 0)
Signed-off-by: Hyunjung Ko <hj351016@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260806101235.809370-2-hj351016@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_ct_handle_fragments() runs its header sanity checks before handing
anything to the defragmentation engine:
if (family == NFPROTO_IPV4)
err = tcf_ct_ipv4_is_fragment(skb, &frag);
else
err = tcf_ct_ipv6_is_fragment(skb, &frag);
if (err || !frag)
return err;
tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM;
tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of
them frees or queues the skb, so on that path the caller still owns it.
tcf_ct_act() however funnels every non-zero return into the
ownership-transfer exit:
err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag);
if (err)
goto out_frag;
...
out_frag:
if (err != -EINPROGRESS)
tcf_action_inc_drop_qstats(&c->common);
return TC_ACT_CONSUMED;
TC_ACT_CONSUMED means the action took ownership of the skb, so no caller
frees it - sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for that verdict. The
skb is therefore orphaned: one sk_buff plus its data buffer is leaked per
malformed packet, unbounded. Note the drop counter is already incremented
for these errors, so the statistics claim a drop that never happens.
Three different ownership states reach out_frag: today - the skb may be
queued by the defrag engine (-EINPROGRESS), already freed by
nf_ct_handle_fragments(), or still owned by us. Tell the caller which of
those it is, and free the packet ourselves in the last case, which
restores the TC_ACT_SHOT behaviour that predated the Fixes: commit.
Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6
header with nexthdr = 0 (hop-by-hop) and nothing after it, on a
clsact ingress chain with "action ct". kmemleak reports one leaked
232-byte skbuff_head_cache object plus its 704-byte data buffer per
packet; with this patch it reports none.
Fixes: 3f14b377d0 ("net/sched: act_ct: fix skb leak and crash on ooo frags")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Hyunjung Ko <hj351016@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260806101235.809370-1-hj351016@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Variables handling inode numbers - such as the 'i_ino' member of the
inode structure - have been converted to 'u64' within the kernel to
ensure consistency. However, some parts of the nilfs2 implementation
still use 'ino_t' or 'unsigned long' - both of which are
architecture-dependent types - to handle inode numbers.
Replace those remaining instances of 'ino_t' or 'unsigned long' with
'u64'.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
In rtlgen_write_mmd(), the MDIO_AN_EEE_ADV case swaps the arguments to
rtlgen_write_vend2(): it passes the MMD register number as the OCP address
and the OCP address constant as the value. The caller's value is discarded
and the write lands on the wrong register, so the EEE advertisement cannot
be configured on the affected PHYs.
Mirror rtlgen_read_mmd() and write the value to RTL_MDIO_AN_EEE_ADV.
Fixes: da681ed73f ("net: phy: realtek: improve mmd register access for internal PHY's")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260806134716.3511821-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On cross-region connections we observed delayed ACKs suddenly turning
into immediate ACKs plus a TCP_MAX_QUICKACKS burst, as if the
connection had just received its first data segment.
Commit 95b9a87c6a ("tcp: record last received ipv6 flowlabel")
squeezed icsk_ack.ato into 8 bits, sized for TCP_DELACK_MAX. But both
writers still bound ato by icsk_rto, which can be well above 255
jiffies, so the bitfield assignment silently wraps mod 256: repeated
delack timer misses double ato up to icsk_rto, storing 320 as 64 and
256 as 0, and ato == 0 is the "first data packet" sentinel in
tcp_event_data_recv().
Clamp both writers to TCP_DELACK_MAX, which the static_assert already
guarantees to fit and tcp_send_delayed_ack() effectively caps ato at
anyway.
Fixes: 95b9a87c6a ("tcp: record last received ipv6 flowlabel")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260807014437.36687-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a warning on nilfs_btree_assign:
WARNING: fs/nilfs2/btree.c:2302 at nilfs_btree_assign+0x983/0xbe0 fs/nilfs2/btree.c:2302,
Analysis found that a corrupted file has the following btree layout:
Level2(key/ptr): [ 256/15 ]
Level1(key/ptr): [ 0/8, 1/9, 0/10, 3/11, 4/12, 5/13, 6/14,
139637976727559/16, 0/17 ]
The test truncated the file to 2 bytes, which partially zeroes the first
block and adds the file to the dirty list. When the segment constructor
writes it and assigns a new blocknr for the index block, it searches the
btree with key=0 and min level=2, and apparently returns -ENOENT.
Therefore, we should perform more checks on the btree nodes and return
early.
[ryusuke: split long lines in btree.c to satisfy checkpatch and
improved the error message format for clarity]
Reported-by: syzbot+158be45e4d99232e1900@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=158be45e4d99232e1900
Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
Fixes: 17c76b0104 ("nilfs2: B-tree based block mapping")
Cc: stable+noautosel@kernel.org # Warning suppression primarily
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
tcf_action_check_ctrlact() range checks the primary control action:
if (!opcode)
ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0;
TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it
cannot be set that way. But act_gact and act_police each carry a second,
independent control action supplied by user space that never reaches that
helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject
TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned
verbatim from the action.
In particular user space can store TC_ACT_CONSUMED, which is
TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value
range. That verdict tells every caller the action took ownership of the
skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for it. The result is
one leaked sk_buff plus its data buffer per packet traversing the filter,
unbounded, for all traffic on the chain including kernel-generated
packets.
Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so
with pval = 1 gact_determ() returns the fallback for every packet.
act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and
tcf_police_mtu_check() always passes.
TC_ACT_CONSUMED was added by commit 720f22fed8 ("net: sched: refactor
reinsert action"), after both goto-chain guards were written:
commit 9469f375ab ("net/sched: act_gact: disallow 'goto chain' on
fallback control action") and
commit c08f5ed5d6 ("net/sched: act_police: disallow 'goto chain' on
fallback control action"). Neither guard was widened when the new
verdict appeared.
Factor the existing range test out of tcf_action_check_ctrlact() as
tcf_action_valid() and apply it to both fallbacks. The helper cannot call
tcf_action_check_ctrlact() directly because that also allocates a
goto_chain, which is exactly what these two sites must not do.
Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte
skbuff_head_cache object plus its 704-byte data buffer per packet. With
this patch both configurations are rejected with -EINVAL and kmemleak
reports none.
Fixes: 720f22fed8 ("net: sched: refactor reinsert action")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Hyunjung Ko <hj351016@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260806101252.809593-1-hj351016@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
veth_poll() derives the index of the peer TX queue to wake from
rq->xdp_rxq.queue_index. That field is only initialized by
xdp_rxq_info_reg() in veth_enable_xdp_range(), which runs only when an
XDP program is attached. On the plain GRO/NAPI path
(veth_napi_enable_range()) xdp_rxq_info_reg() is never called, so
queue_index stays 0 for every queue, as priv->rq is zero-allocated.
So in a multi-queue setup with GRO enabled and no XDP program attached,
every NAPI instance looks at the peer's TX queue 0. If veth_xmit() stops
peer TX queue 1 because the ptr_ring is full (NETDEV_TX_BUSY), nothing
ever wakes it again: the poller draining queue 1 wakes queue 0 instead.
veth implements no ndo_tx_timeout, so the netdev watchdog does not kick
in either, and the queue stays stopped indefinitely.
Derive the index from the position of the rq within priv->rq instead,
which is correct regardless of whether XDP was ever enabled.
Scripts to reproduce the stall are available at
https://github.com/netoptimizer/veth-backpressure-performance-testing
Fixes: dc82a33297 ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Signed-off-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Tested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20260806-veth-fix-poll-queue-idx-v1-1-c5357fb7573d@tu-berlin.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
