Fix minor cgroup v2 memory.stat documentation issues. Correct the
vmalloc per-node marker now that vmalloc uses the native NR_VMALLOC node
stat, and document zswap_incomp as a byte-valued memory amount instead
of as a page counter.
Fixes: c466412c73 ("mm: memcontrol: switch to native NR_VMALLOC vmstat counter")
Fixes: 5ad41a38c3 ("mm: zswap: add per-memcg stat for incompressible pages")
Signed-off-by: Doehyun Baek <doehyunbaek@gmail.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----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=h+xD
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
to the MSI IRQ support code (Yuanhe Shu)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AQ7U
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2026-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq fix from Ingo Molnar:
- Revert a change that added a bad iounmap(NULL) call
to the MSI IRQ support code (Yuanhe Shu)
* tag 'irq-msi-2026-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "PCI/MSI: Unmap MSI-X region on error"
- Align sparc to other archs by providing ucontext.h wrapper
- Fix buffer underflow in led driver
- Export mcount for clang and disable compat when using lld for linking
- API choice improvement for sysfs code for vio
- Fix build warnings and notification of missing prototype
- Remove dead code and dead configs
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQfqfbgobF48oKMeq81AykqDLayywUCajuFDhQcYW5kcmVhc0Bn
YWlzbGVyLmNvbQAKCRA1AykqDLayy2QqAQDLwIeGHu6ZzVpAvmZlBn3Hl823/UoZ
LnAn1UfSmXL3JQEAyeu/EN9/+8IVIDECWxYzSp+1OCLdla/v/cVrAvv7BQ4=
=cUkR
-----END PGP SIGNATURE-----
Merge tag 'sparc-for-7.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Align sparc to other archs by providing ucontext.h wrapper
- Fix buffer underflow in led driver
- Export mcount for clang and disable compat when using lld for linking
- API choice improvement for sysfs code for vio
- Fix build warnings and notification of missing prototype
- Remove dead code and dead configs
* tag 'sparc-for-7.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc: Remove remaining defconfig references to the pktcdvd driver
sparc: led: avoid trimming a newline from empty writes
sparc: Export mcount for Clang-built modules
sparc: Disable compat support with LLD
sparc: Avoid -Wunused-but-set-parameter in clear_user_page()
sparc: add _mcount() prototype
sparc64: uprobes: add missing break
sparc: remove unused SERIAL_CONSOLE config option
sparc32: remove deadwood swift_flush_tlb_page() debug code
sparc: uapi: Add ucontext.h
sparc: vio: use sysfs_emit in sysfs show functions
* Cleanups
- replace get_zeroed_page() with kzalloc()
- remove unnecessary goto and associated label
- change fn_label_build() to return err on failure instead of NULL or err
- free rawdata as soon as possible
- use explicit instead of implicit flex array in rawdata_f_data
- use __label_make_stale in __aa_proxy_redirect
- return correct error by propagate -ENOMEM correctly in unpack_table
- aa_label_alloc use aa_label_free on alloc failure
- add a conditional version of get_newest_label
* Bug Fixes
- mediate the implicit connect of TCP fast open sendmsg
- fix C23ism of label immediately before a declaration
- fix kernel-doc warnings
- fix spelling mistakes
- fix use-after-free in rawdata dedup loop
- Fix inverted comparison in cache_hold_inc()
- fix uninitialized pointer passed to audit_log_untrustedstring()
- don't audit files pointing to aa_null.dentry
- put secmark label after secid lookup
- fix aa_getprocattr free procattr leak on format failure
- release exe file resources on path failure
- fail policy unpack on accept2 allocation failure
- Fix return in ns_mkdir_op
- remove or add symlinks to rawdata according to export_binary
- fix NULL pointer dereference in unpack_pdb
- fix potential UAF in aa_replace_profiles
- grab ns lock and refresh when looking up changehat child profiles
- enable differential encoding
- check label build before no_new_privs test
- conditionally compile get_loaddata_common_ref()
- fix unix socket mediation cache update, and leak
-----BEGIN PGP SIGNATURE-----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=2jx/
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2026-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Another round of bug fixing and some code cleanups, there are no new
features. The biggest thing to note is Georgia is being added to help
co-maintain apparmor.
Cleanups:
- replace get_zeroed_page() with kzalloc()
- remove unnecessary goto and associated label
- change fn_label_build() to return err on failure instead of NULL or
err
- free rawdata as soon as possible
- use explicit instead of implicit flex array in rawdata_f_data
- use __label_make_stale in __aa_proxy_redirect
- return correct error by propagate -ENOMEM correctly in unpack_table
- aa_label_alloc use aa_label_free on alloc failure
- add a conditional version of get_newest_label
Bug Fixes:
- mediate the implicit connect of TCP fast open sendmsg
- fix C23ism of label immediately before a declaration
- fix kernel-doc warnings
- fix spelling mistakes
- fix use-after-free in rawdata dedup loop
- Fix inverted comparison in cache_hold_inc()
- fix uninitialized pointer passed to audit_log_untrustedstring()
- don't audit files pointing to aa_null.dentry
- put secmark label after secid lookup
- fix aa_getprocattr free procattr leak on format failure
- release exe file resources on path failure
- fail policy unpack on accept2 allocation failure
- Fix return in ns_mkdir_op
- remove or add symlinks to rawdata according to export_binary
- fix NULL pointer dereference in unpack_pdb
- fix potential UAF in aa_replace_profiles
- grab ns lock and refresh when looking up changehat child profiles
- enable differential encoding
- check label build before no_new_privs test
- conditionally compile get_loaddata_common_ref()
- fix unix socket mediation cache update, and leak"
* tag 'apparmor-pr-2026-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (35 commits)
apparmor: advertise the tcp fast open fix is applied
apparmor: mediate the implicit connect of TCP fast open sendmsg
apparmor: fix label can not be immediately before a declaration
apparmor: fix kernel-doc warnings
apparmor: replace get_zeroed_page() with kzalloc()
security: apparmor: fix two spelling mistakes
apparmor: fix use-after-free in rawdata dedup loop
apparmor: Fix inverted comparison in cache_hold_inc()
apparmor: fix uninitialised pointer passed to audit_log_untrustedstring()
apparmor: don't audit files pointing to aa_null.dentry
apparmor: put secmark label after secid lookup
apparmor: aa_getprocattr free procattr leak on format failure
apparmor: remove unnecessary goto and associated label
apparmor: release exe file resources on path failure
apparmor: fail policy unpack on accept2 allocation failure
apparmor: Fix return in ns_mkdir_op
apparmor: remove or add symlinks to rawdata according to export_binary
apparmor: fix NULL pointer dereference in unpack_pdb
apparmor: make fn_label_build() capable of handling not supported
apparmor: change fn_label_build() call to not return NULL
...
The deprecation notices for direct p->scx.slice/dsq_vtime writes and for
ops->cpu_acquire/release() use plain pr_warn(), so they repeat on every
scheduler (re)load and can flood the kernel log.
The slice/dsq_vtime notice is the worst offender: it is emitted from the
BPF verifier's btf_struct_access callback, which is re-evaluated as the
verifier explores program paths, so a single scheduler load can print it
many times -- hundreds of lines on some hosts, dozens within the same
second.
Switch both notices to pr_warn_ratelimited() so each deprecation is still
reported but bursts no longer spam the log, and add the missing newline
to the slice/dsq_vtime message.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- A new driver for Wacom W9000-series penabled touchscreens
- Updates to STM FTS driver adding support for reset line and preparing
the driver for STMFTS5 support
- Updates to RMI4 and IMS PCU drivers hardening the code
- Support for half-duplex mode restored in ADS7846 driver
- Updates to driver's device_id tables to use named initializers
- Removal of no longer used PCAP keys and touchscreen drivers (support
for the ezx series of phones was removed in 2022)
- Removal of xilinx_ps2 driver which is no longer used either
- Updates to userio to allow setting up additional serio port
characteristics (such as id, extra and proto)
- Assorted hardening and cleanup fixes for other drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCajs+4wAKCRBAj56VGEWX
nN+EAQDaknpx+XZLU28jQqm4mK2BZde1cbtZ9/D7VS3n50by9AD/e+Tr3aqDAjTs
hmDqdkrBIo8YlvlCvq4dosAKBH8gXA0=
=nZiu
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- A new driver for Wacom W9000-series penabled touchscreens
- Updates to STM FTS driver adding support for reset line and preparing
the driver for STMFTS5 support
- Updates to RMI4 and IMS PCU drivers hardening the code
- Support for half-duplex mode restored in ADS7846 driver
- Updates to driver's device_id tables to use named initializers
- Removal of no longer used PCAP keys and touchscreen drivers (support
for the ezx series of phones was removed in 2022)
- Removal of xilinx_ps2 driver which is no longer used either
- Updates to userio to allow setting up additional serio port
characteristics (such as id, extra and proto)
- Assorted hardening and cleanup fixes for other drivers
* tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (72 commits)
Input: mms114 - fix touch indexing for MMS134S and MMS136
Input: elan_i2c - prevent division by zero and arithmetic underflow
Input: stop force-feedback timer when unregistering input devices
Input: iforce - bound the device-reported force-feedback effect index
Input: goodix - clamp the device-reported contact count
Input: mms114 - reject an oversized device packet size
Input: touchwin - reset the packet index on every complete packet
Input: rmi4 - update formatting in F12
Input: rmi4 - propagate proper error code in F12 sensor tuning
Input: rmi4 - simplify size calculations in F12
Input: rmi4 - use sizeof(*ptr) and idiomatic checks in f12 allocators
Input: rmi4 - use devm_kmalloc for F12 data packet buffer
Input: rmi4 - use flexible array member for IRQ masks in F12
Input: rmi4 - use unaligned access helpers in F12
Input: rmi4 - change reg_size type to u32
Input: rmi4 - refactor F12 probe function
Input: rmi4 - use kzalloc_flex() for struct rmi_function
Input: rmi4 - refactor function allocation and registration
Input: rmi4 - use local presence map in rmi_read_register_desc()
Input: rmi4 - fix limit in rmi_register_desc_has_subpacket()
...
Added:
depth limit to indx_find_buffer() to prevent stack overflow
validate split-point offset in indx_insert_into_buffer()
bounds check to run_get_highest_vcn()
fileattr_get() and fileattr_set() support
zero stale pagecache beyond valid data length
handle delayed allocation overlap in run lookup
validate lcns_follow in log_replay() conversion
cap RESTART_TABLE free-chain walker at rt->used
resize log->one_page_buf when adopting on-disk page size
reject direct userspace writes to reserved $LX* xattrs
Fixed:
out-of-bounds read in decompress_lznt()
avoid -Wmaybe-uninitialized warnings
hold ni_lock across readdir metadata walk
preserve non-DOS attribute bits in system.dos_attrib
validate index entry key bounds
syncing wrong inode on DIRSYNC cross-directory rename
validate Dirty Page Table capacity in log_replay() copy_lcns
wrong LCN in run_remove_range() when splitting a run
allocate iomap inline_data using alloc_page
mount failure on 64K page-size kernels
out-of-bounds read in ntfs_dir_emit() and hdr_find_e()
bound attr_off in UpdateResidentValue against data_off
bound DeleteIndexEntryAllocation memmove length
bound copy_lcns dp->page_lcns[] index in analysis pass
bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}
prevent potential lcn remains uninitialized
Changed:
bound to_move in indx_insert_into_root() before hdr_insert_head()
call _ntfs_bad_inode() when failing to rename
fold resident writeback into writepages loop
force waiting for direct I/O completion
fold file size handling into ntfs_set_size()
reject SEEK_DATA and SEEK_HOLE past EOF early
format code, add descriptive comments and remove non-useful
-----BEGIN PGP SIGNATURE-----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=OVdT
-----END PGP SIGNATURE-----
Merge tag 'ntfs3_for_7.2' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"Added:
- depth limit to indx_find_buffer() to prevent stack overflow
- validate split-point offset in indx_insert_into_buffer()
- bounds check to run_get_highest_vcn()
- fileattr_get() and fileattr_set() support
- zero stale pagecache beyond valid data length
- handle delayed allocation overlap in run lookup
- validate lcns_follow in log_replay() conversion
- cap RESTART_TABLE free-chain walker at rt->used
- resize log->one_page_buf when adopting on-disk page size
- reject direct userspace writes to reserved $LX* xattrs
Fixed:
- out-of-bounds read in decompress_lznt()
- avoid -Wmaybe-uninitialized warnings
- hold ni_lock across readdir metadata walk
- preserve non-DOS attribute bits in system.dos_attrib
- validate index entry key bounds
- syncing wrong inode on DIRSYNC cross-directory rename
- validate Dirty Page Table capacity in log_replay() copy_lcns
- wrong LCN in run_remove_range() when splitting a run
- allocate iomap inline_data using alloc_page
- mount failure on 64K page-size kernels
- out-of-bounds read in ntfs_dir_emit() and hdr_find_e()
- bound attr_off in UpdateResidentValue against data_off
- bound DeleteIndexEntryAllocation memmove length
- bound copy_lcns dp->page_lcns[] index in analysis pass
- bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}
- prevent potential lcn remains uninitialized
Changed:
- bound to_move in indx_insert_into_root() before hdr_insert_head()
- call _ntfs_bad_inode() when failing to rename
- fold resident writeback into writepages loop
- force waiting for direct I/O completion
- fold file size handling into ntfs_set_size()
- reject SEEK_DATA and SEEK_HOLE past EOF early
- format code, add descriptive comments and remove non-useful"
* tag 'ntfs3_for_7.2' of https://github.com/Paragon-Software-Group/linux-ntfs3: (34 commits)
ntfs3: reject direct userspace writes to reserved $LX* xattrs
fs/ntfs3: resize log->one_page_buf when adopting on-disk page size
fs/ntfs3: prevent potential lcn remains uninitialized
ntfs3: cap RESTART_TABLE free-chain walker at rt->used
fs/ntfs3: bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}
fs/ntfs3: validate lcns_follow in log_replay conversion
fs/ntfs3: bound copy_lcns dp->page_lcns[] index in analysis pass
fs/ntfs3: bound DeleteIndexEntryAllocation memmove length
fs/ntfs3: bound attr_off in UpdateResidentValue against data_off
ntfs3: fix out-of-bounds read in ntfs_dir_emit() and hdr_find_e()
fs/ntfs3: fix mount failure on 64K page-size kernels
ntfs3: avoid another -Wmaybe-uninitialized warning
ntfs3: Allocate iomap inline_data using alloc_page
fs/ntfs3: format code, deal with comments
fs/ntfs3: reject SEEK_DATA and SEEK_HOLE past EOF early
fs/ntfs3: fold file size handling into ntfs_set_size()
fs/ntfs3: force waiting for direct I/O completion
fs/ntfs3: fold resident writeback into writepages loop
fs/ntfs3: handle delayed allocation overlap in run lookup
fs/ntfs3: zero stale pagecache beyond valid data length
...
When spi_imx_can_dma() selects DMA, the ECSPI is configured for DMA:
spi_imx_setupxfer() sets CTRL.SMC and clears dynamic_burst, and
spi_imx_dma_transfer() programs the dynamic-burst BURST_LENGTH and the
SDMA watermarks.
If the DMA descriptor cannot be prepared (dmaengine_prep_slave_single()
returns NULL), the transfer is failed with SPI_TRANS_FAIL_NO_START and
falls back to PIO. The dynamic-burst DMA path uses its own bounce
buffers instead of the SPI core's mapping, so xfer->{tx,rx}_sg_mapped
are not set and the core's DMA->PIO retry is skipped; the driver falls
back to PIO internally. But none of the DMA-mode configuration is
undone, so the PIO transfer runs with CTRL.SMC set, the wrong burst
length and dynamic_burst cleared, and the transferred data is corrupted.
This is easily hit on i.MX8MP boards that describe ECSPI DMA in the
device tree but run SDMA on ROM firmware (no external sdma-imx7d.bin):
every ECSPI DMA prepare fails. An Infineon SLB9670 TPM on ECSPI1 then
returns shifted TPM2_GetCapability data, is flagged "field failure
mode", /dev/tpmrm0 is never created.
Set controller->fallback before re-running spi_imx_setupxfer() so the
ECSPI is reconfigured exactly like a normal PIO transfer. With
controller->fallback set, spi_imx_setupxfer() sees spi_imx_can_dma()
return false, so it clears spi_imx->usedma and reprograms the controller
(clears CTRL.SMC, restores dynamic_burst and the PIO burst length). No
explicit spi_imx->usedma = false is needed: setupxfer() already updates
it from the can_dma() result.
Fixes: faa8e404ad ("spi: imx: support dynamic burst length for ECSPI DMA mode")
Cc: stable@vger.kernel.org
Signed-off-by: Javier Fernandez Pastrana <javier.pastrana@linutronix.de>
Acked-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260624151958.18626-1-javier.pastrana@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
smb2_set_sparse() converts every FSCTL_SET_SPARSE failure to false and
marks sparse support as broken for the share. Callers therefore report
EOPNOTSUPP even for errors such as ENOSPC or EACCES, and later sparse
operations remain disabled until the share is unmounted.
Return the SMB2 ioctl error directly. Set broken_sparse_sup only for
EOPNOTSUPP, which indicates that the server does not support the request.
Update smb3_punch_hole() to propagate the error returned by
smb2_set_sparse().
Fixes: 3d1a3745d8 ("Add sparse file support to SMB2/SMB3 mounts")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
receive_encrypted_standard() allocates next_buffer before checking
whether the number of compound PDUs already reached MAX_COMPOUND. If
the limit check fails, the function returns immediately and the newly
allocated next_buffer is not assigned to server->smallbuf/server->bigbuf,
making it leaked.
Move the MAX_COMPOUND check before allocating next_buffer.
Fixes: b24df3e30c ("cifs: update receive_encrypted_standard to handle compounded responses")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, __reconnect_target_locked() prints the error pointer
'hostname' using PTR_ERR() and %ld, printing only the error code.
Fix this by using by using %pe to print the error symbolic code instead,
and remove PTR_ERR().
Signed-off-by: Fredric Cover <fredric.cover.lkernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
FALLOC_FL_ALLOCATE_RANGE identifies the default fallocate
allocation mode and is defined as zero.
Use the symbolic name instead of a literal zero in
smb3_fallocate() to make the mode dispatch clearer. This
does not change behavior.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Ownership (chown) and group (chgrp) modifications were being ignored when
mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or
CIFS_MOUNT_MODE_FROM_SID were also explicitly set.
Fix this by checking for posix_extensions in cifs_setattr_nounix() when
updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map
and set the ownership/group information on the server.
Cc: stable@vger.kernel.org
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In id_mode_to_cifs_acl(), aclflag was initialized to CIFS_ACL_DACL by default.
This forced the client to request setting the DACL even when only an ownership
(chown) or group (chgrp) change was being performed.
Let build_sec_desc() do the proper flag calculation by initializing aclflag
to 0. build_sec_desc() sets the appropriate bits (CIFS_ACL_OWNER, CIFS_ACL_GROUP,
or CIFS_ACL_DACL) depending on what actually changed. During ownership transfer,
CIFS_ACL_DACL is only set if replace_sids_and_copy_aces() actually replaces the
SIDs inside any of the DACL's ACEs.
If build_sec_desc() results in aclflag being 0 (meaning no changes were mapped),
exit early to avoid sending an empty security descriptor update to the server.
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit
f2ba877402 ("arm64: mm: Map the kernel data/bss read-only in the linear map")
the linear alias of the .data and .bss regions is remapped read-only
early during the boot. (Note that a subsequent patch to unmap this
region entirely was reverted just before the v7.2 merge window, and will
be brought back in an improved form for the v7.3 cycle)
Fuad reports that in some cases, the KVM init code may apply relocations
to variables that reside in .data, and does so via the linear map. This
means that remapping .data read-only beforehand is a bad idea, and
results in an early boot crash.
These variables in .data are only present when CONFIG_NVHE_EL2_DEBUG or
CONFIG_NVHE_EL2_TRACING are enabled, which is why it was not spotted in
testing.
So move the remap to mark_rodata_ro(), which is a reasonable place to
put this, and ensures that it happens much later during the boot. It
also means that rodata=off is now taken into account, and so the linear
alias will remain writable in that case.
Fixes: f2ba877402 ("arm64: mm: Map the kernel data/bss read-only in the linear map")
Reviewed-by: Fuad Tabba <fuad.tabba@linux.dev>
Tested-by: Fuad Tabba <fuad.tabba@linux.dev>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
"fan-supply" already has a type and shouldn't have a type $ref. Drop the
$ref to fix the warning.
Fixes: 39dd85d924 ("dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU")
Link: https://patch.msgid.link/20260624133643.4146351-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
When function tracing or Kprobes is enabled, entering an ACPI Low
Power Idle (LPI) state triggers the following RCU splat:
RCU not on for: acpi_idle_lpi_enter+0x4/0xd8
WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228
The acpi_idle_lpi_enter() function is invoked within the cpuidle
path after RCU has already been disabled for the current local CPU.
Consequently, ftrace's function_trace_call() expects RCU to be
actively watching before recording trace data, emitting a warning
if it is not.
Fix this by annotating acpi_idle_lpi_enter(), the generic __weak
stub, and the RISC-V implementation of acpi_processor_ffh_lpi_enter()
with __cpuidle. This moves these functions into the '.cpuidle.text'
section, implicitly disabling ftrace instrumentation (notrace) along
this sensitive path and preventing trace-induced RCU warnings during
idle entry.
Fixes: a36a7fecfe ("ACPI / processor_idle: Add support for Low Power Idle(LPI) states")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: lihuisong@huawei.com
Link: https://patch.msgid.link/20260616072617.2272-1-lirongqing@baidu.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add bindings for the regulators found in the Spreadtrum/Unisoc SC2730
PMIC, used e.g. with the UMS512 and UMS9230 SoCs.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260620-sc2730-regulators-v6-1-bbd2db395231@abscue.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Commit 97f7d3f9c9 ("ACPICA: Replace strncpy() with strscpy_pad() in
acpi_ut_safe_strncpy()") switched over the ACPICA code in the kernel to
using strscpy_pad() instead of a combination of strncpy() and manual
NUL-termination of the destination string, but it overlooked the fact
that tools also use the code in question and strscpy_pad() is not
defined in those builds.
Address that by using the original ACPICA code in non-kernel builds.
Fixes: 97f7d3f9c9 ("ACPICA: Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy()")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/79e9e913-0fb1-4110-804b-c3b5d0edafe4@kernel
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Kees Cook <kees@kernel.org>
[ rjw: Fixed up the number of added code lines ]
Link: https://patch.msgid.link/12923581.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The example DTS is tested in a wrapped node with address/size-cells=1,
thus reg had incorrect entry leading to dt_binding_check fails:
thermal/amlogic,thermal.example.dtb: temperature-sensor@20000 (amlogic,t7-thermal): reg: [[0, 131072], [0, 80]] is too long
Fixes: b1c8ccdbd4 ("dt-bindings: thermal: amlogic: Add support for T7")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260622100231.438435-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The @filter_np parameter descriptions in of_map_id() and of_map_msi_id()
contained the text '*filter_np' in prose. Docutils interprets a leading
'*' as the start of RST emphasis (italic), but finds no closing '*',
triggering:
Documentation/devicetree/kernel-api:11: ./drivers/of/base.c:2134:
WARNING: Inline emphasis start-string without end-string. [docutils]
Documentation/devicetree/kernel-api:11: ./drivers/of/base.c:2260:
WARNING: Inline emphasis start-string without end-string. [docutils]
Fix by wrapping '*filter_np' in double backticks (*filter_np) to
render it as an RST inline code literal, which is also the correct
kernel-doc convention for pointer expressions.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606130111.ldC96rqf-lkp@intel.com/
Signed-off-by: Vijayanand Jitta <vijayanand.jitta@oss.qualcomm.com>
Link: https://patch.msgid.link/20260619-iommu_map_kdoc_fix-v1-1-9573e1cf30b3@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
fwnode_property_get_reference_args() should return -ENOENT when an out
of bound index is passed. An issue arised with the OF backend because
the OF API use signed indexes while the fwnode API use unsigned ones.
When an index value greater the INT_MAX was passed to the OF backend
it got casted to a negative value and it returned -EINVAL instead of
-ENOENT. This patch add a check to of_fwnode_get_reference_args() to
catch negative index before they are passed to the OF API and return
-ENOENT right away.
This issue appeared when the following pattern was used in the LED
subsystem:
index = fwnode_property_match_string(fwnode, "led-names", name)
led_node = fwnode_find_reference(fwnode, "leds", index);
Unlike the same pattern with the OF API, this pattern implicitly cast
the signed return value of fwnode_property_match_string() to an
unsigned index leading to the above issue with the OF backend. It can
be argued that the return value of fwnode_property_match_string()
should be checked separately, but I think there is value in supporting
such simple and straight to the point patterns.
Link: https://lore.kernel.org/linux-leds/aimVRwJPhlGxsIUj@tom-desktop/T/#mc43cbf7e0599991b56dd0d9680714d28d145fbc8
Cc: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260618152035.1600436-1-alban.bedel@lht.dlh.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Otherwise zone append commands will miss their integrity data. While
this works "fine" for auto-PI, it break file system PI and non-PI
metadata.
With this XFS on ZNS namespace with non-PI metadata and 512 byte sectors
with PI work, while PI 4k sector formats with PI work only when Caleb's
"block: fix integrity offset/length conversions" is applied as well.
Note that unlike regular writes, zone append does need remapping as
partitions are not supported on zoned block devices.
Fixes: df3c485e0e ("block: switch on bio operation in bio_integrity_prep")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://patch.msgid.link/20260624080014.1998650-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_integrity_alloc_buf usage of GFP_ flags is messed up. For one it
mixes GFP_NOFS and GFP_NOIO for neighbouring allocations, but it also
makes the allocations fail more often than needed. That code was copied
from bio_alloc_bioset which needs to do that so that it can punt to the
rescuer workqueue, but none of that is needed for the integrity
allocations that either sits in the file system or at the very bottom
of the I/O stack. Failing early means we'll do a fully waiting
allocation from the mempool ->alloc callback which is usually much
larger than required.
Fix this by passing a gfp_t so that the file system path can pass
GFP_NOFS and the auto-integrity code can pass GFP_NOIO, and don't
modify the allocation type except for disabling warnings.
Fixes: ec7f31b2a2 ("block: make bio auto-integrity deadlock safe")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://patch.msgid.link/20260624080014.1998650-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Take a css reference under RCU, drop RCU, and then associate the bio with
the blkg. This avoids nesting queue_lock under RCU and prepares to protect
blkcg with blkcg_mutex instead of queue_lock.
Use css_tryget() instead of css_tryget_online() so swap writeback for
pages charged to a dying memcg still passes the dying css to
bio_associate_blkg_from_css(). That preserves the existing closest-live
ancestor fallback instead of charging those bios to the root blkg.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/c910d2c39d3ec97f67de68af636a52394342d55f.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The correct lock order is q->queue_lock before blkcg->lock, and in order
to prevent deadlock from blkcg_destroy_blkgs(), trylock is used for
q->queue_lock while blkcg->lock is already held, this is hacky.
Refactor blkcg_destroy_blkgs() to hold blkcg->lock only long enough to
get the first blkg and then release it. Then take q->queue_lock and
blkcg->lock in the correct order to destroy the blkg. This is a very cold
path, so the extra lock/unlock cycles are acceptable.
Also prepare to convert protecting blkcg with blkcg_mutex instead of
queue_lock.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/00b03cf74a9937cb4d6dd67a189ddc00a3de0451.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a bio is already associated with a blkg, the blkcg is already pinned
until the bio is done, so there is no need for RCU protection. Otherwise,
protect blkcg_css() with RCU independently. Prepare to protect blkcg with
blkcg_mutex instead of queue_lock.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/8496fa234b21d4b31b7f068766906d0bffcac8e6.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change this in two steps:
1) hold rcu lock and do blkg_lookup() from fast path;
2) hold queue_lock directly from slow path, and don't nest it under rcu
lock;
Prepare to convert protecting blkcg with blkcg_mutex instead of
queue_lock.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/93f33cc9e5a39dddb78dcd934d0c1d04b564fb00.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With previous modification to delay freeing policy data after an RCU grace
period, prfill() can run under RCU instead of taking queue_lock. However,
policy teardown can still clear blkg->pd[plid] after blkcg_print_blkgs()
observes the policy enabled bit.
Load policy data once with READ_ONCE() and skip the blkg if teardown
already cleared it. Do the same in recursive stat walks for descendant
blkgs. Remove the stale BFQ debug queue_lock assertion because
blkcg_print_blkgs() no longer calls prfill() with queue_lock held. This
also lets ioc_qos_prfill() and ioc_cost_model_prfill() use IRQ-safe
ioc->lock locking without re-enabling IRQs while queue_lock is still held.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/db7633d5e263dd1c2bf9b901762545a84b7d714e.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently blkcg_print_blkgs() must hold RCU to iterate blkgs from a
blkcg, and prfill() must hold queue_lock to prevent policy data from
being freed by policy deactivation. As a consequence, queue_lock has to
be nested under RCU from blkcg_print_blkgs().
Delay freeing policy data until after an RCU grace period so prfill() can
be protected by RCU alone.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/e20e5d984b41a026d61851966bed35eb094c4bff.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg_print_one_stat() will be called for each blkg:
- access blkg->iostat, which is freed from rcu callback
blkg_free_workfn();
- access policy data from pd_stat_fn(), which is freed from
pd_free_fn(), while pd_free_fn() can be called by removing blkcg or
deactivating policy;
Take blkcg->lock while iterating so the blkgs stay online and both
blkg->iostat and policy data for activated policies stay valid. Use
irq-safe locking because blkcg->lock can be nested under q->queue_lock,
which is used from IRQ completion paths.
Prepare to convert protecting blkgs from request_queue with mutex.
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/05799877e720dcd300e2ddd4625e8e162959d7cc.1780621988.git.yukuai@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If device_link_add() fails in snd_soc_bind_card() just skip that
driver pair and carry on.
This means that ASoC must now keep track of which components it was
able to device_link to the card->dev. The new card_device_link member
of struct snd_soc_component is non-NULL if a device_link exists.
The intent of the device link is to ensure that the machine driver
system-suspends before the component drivers, to prevent ASoC
suspend attempting to reconfigure a driver that has already suspended.
It isn't possible to create this device link if the machine driver is
a parent of the component driver or already has a device_link in the
opposite direction. In this case skip the link. A warn is placed in
kernel log since this might indicate a genuine design problem with
those two drivers (this can be downgraded to dbg in future when
people are happy that all these special drivers correctly handle their
reversed shutdown order).
Fixes: 0f54ce994b ("ASoC: soc-core: Create device_link to ensure correct suspend order")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/linux-sound/61bd38e7-5eb9-4448-a93f-afa2ccbd1c9d@opensource.cirrus.com/T/#m496fe5a11b0a3649afd2e85da5e1cea82bb16d8a
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260623135821.4125543-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently that header is only included via:
<sound/dmaengine_pcm.h> ->
<sound/soc.h> ->
<linux/platform_device.h>
which doesn't look reliable, still more in the presence of the comment:
/* For the current users of sound/soc.h to avoid build issues */
in <sound/soc.h>.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260624083708.254517-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
da9121_i2c_probe() stores i2c_get_match_data() in chip->subvariant_id
and da9121_assign_chip_model() switches on DA9121_SUBTYPE_* values. The
OF table provides those subvariant values, but the I2C id table
currently provides DA9121_TYPE_* values.
Make the I2C id table use the same subvariant namespace as the OF table
so non-DT I2C matches feed the expected data type into the model
assignment code.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260624060024.61300-1-pengpeng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Use cpu_physical_id() instead of default_cpu_present_to_apicid() when
getting the APIC ID of the pCPU on which a vCPU is running/loaded, as the
kernel has gone way off the rails if a vCPU is loaded on a pCPU that has
been physically removed from the system. Even if the impossible were to
happen, the absolutely worst case scenario is that hardware will ring the
AIVC doorbell on the wrong pCPU, i.e. a severely broken system will
experience mild performance issues.
Kill off KVM's superfluous kvm_cpu_get_apicid() wrapper along with the
for-KVM export of default_cpu_present_to_apicid(), as they existed purely
for the wonky AVIC usage.
Cc: Kai Huang <kai.huang@intel.com>
Cc: Yosry Ahmed <yosry@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Message-ID: <20260612185459.591892-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Turn arch.n_used_mmu_pages into a stat, mmu_shadow_pages, as the number of
live shadow pages is arguably _the_ most critical datapoint when it comes
to analyzing the shadow MMU. Before the TDP MMU came along, i.e. when the
shadow MMU was the only MMU, explicitly tracking the number of shadow pages
wasn't as interesting, because the same information could more or less be
gleaned from the pages_{1g,2m,4k} stats. But with the TDP MMU, where the
shadow MMU is only used for nested TDP, it becomes extremely difficult, if
not impossible, to determine which SPTEs are coming from the TDP MMU, and
which are coming from the shadow MMU.
E.g. when triaging/debugging shadow MMU performance issues due to "too many
shadow pages", being able to observe that 99%+ of all shadow pages are
unsync is critical to being able to deduce that KVM is effectively leaking
shadow pages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260612133727.411902-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=OiBj
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-7.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
* Fix S390_USER_OPEREXEC so it can now be enabled regardless of other
unrelated capabilities
* Fix handling of the _PAGE_UNUSED pte bit that could lead to guest
memory corruption in some scenarios
* A bunch of misc gmap fixes (locking, behaviour under memory pressure)
* Fix CMMA dirty tracking
The GOP (and even Bspec on some platforms) is a bit inconsistent
on what the CDCLK_FREQ_DECIMAL divider should be. Currently any
mismatch there causes a full CDCLK PLL disable+re-enable, which
we really don't want to do if any displays are currently active.
Let's instead just reprogram CDCLK_FREQ_DECIMAL when that is the
only thing amiss. For any other (more serious) mismatch we still
punt to the full PLL reprogramming.
We also need to tweak the bxt_cdclk_cd2x_pipe() stuff a bit to
consistently select pipe==NONE since we have no idea which pipes
are enabled at this point. Since we're not actually changing the
CDCLK frequency here we don't need to sync the update to any
pipe.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16209
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-2-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
(cherry picked from commit 3f9de66f8a)
Fixes: ba91b9eecb ("drm/i915/cdclk: Decouple cdclk from state->modeset")
Fixes: d66a21947e ("drm/i915/bxt: Sanitize CDCLK to fix breakage during S4 resume")
Fixes: c73666f394 ("drm/i915/skl: If needed sanitize bios programmed cdclk")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits
when the guest's virtual TPR falls under the specified threshold,
allowing KVM to inject previously masked interrupts.
KVM handles these VM exits in handle_tpr_below_threshold().
Commit eb90f3417a ("KVM: vmx: speed up TPR below threshold vmexits")
optimized this function by calling apic_update_ppr() instead of raising
KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is
a pending, deliverable interrupt.
However, if there are no new interrupts pending, apic_update_ppr() does
not issue the request. Thus, kvm_lapic_update_cr8_intercept() and
vmx_update_cr8_intercept() are not called before VM entry, which results
in a high, stale TPR_THRESHOLD. This is problematic due to the following
sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM:
The following check is performed if the “use TPR shadow” VM-execution
control is 1 and the “virtualize APIC accesses” and “virtual-interrupt
delivery” VM-execution controls are both 0: the value of bits 3:0 of
the TPR threshold VM-execution control field should not be greater
than the value of bits 7:4 of VTPR.
This error condition is typically not observed when KVM runs on a bare
metal system because modern processors support APICv, which enables
virtual-interrupt delivery, and which KVM uses when possible. This
causes the processor to no longer generate TPR-below-threshold exits
and to no longer check TPR_THRESHOLD on entry. However, when running
on older platforms, or under nested virtualization on a hypervisor that
does not support virtual-interrupt delivery and enforces this check
(like Hyper-V) this can cause a VM entry failure with hardware error
0x7, as seen in [1].
Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not
find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT).
Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in
apic_update_ppr(), as they now become redundant. This ensures that any
path that updates the guest's PPR also figures out if KVM needs to wait
for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM).
Link: https://github.com/coconut-svsm/svsm/issues/1081 [1]
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Cc: stable@vger.kernel.org
Fixes: eb90f3417a ("KVM: vmx: speed up TPR below threshold vmexits")
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260618174347.1981064-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
