In fb_io_read(), if copy_to_user() performs a partial copy (e.g., due to
a faulty user buffer), the loop adjusts the chunk size 'c' and updates
the remaining 'count'. However, the hardware 'src' pointer has already
been eagerly advanced by the original chunk size.
If the loop is allowed to continue, the read will resume from an
incorrect, over-advanced offset. Since the remaining 'count' was only
decremented by the successful bytes, this desynchronization causes the
next iterations to execute more hardware reads than originally bounded,
eventually leading to out-of-bounds I/O reads.
Fix this by breaking out of the loop immediately upon a partial
copy_to_user(). A partial copy indicates a faulty user buffer, making
subsequent read attempts futile. Breaking out ensures we return the
number of successfully read bytes without risking out-of-bounds hardware
accesses in subsequent mismatched iterations.
Fixes: 6121cd9ef9 ("fbdev: Move I/O read and write code into helper functions")
Cc: stable@vger.kernel.org
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
show_mode(), show_modes(), and store_mode() access fb_info->modelist
and fb_info->mode without holding lock_fb_info(). store_modes() takes
lock_fb_info() while replacing the modelist and freeing the old one.
A concurrent reader or writer can load a pointer to an old modelist
entry before store_modes() frees it, then dereference freed memory or
store a stale freed pointer in fb_info->mode.
Take lock_fb_info() in show_mode(), show_modes(), and store_mode() to
serialize with store_modes(). In show_mode(), copy the mode to the
stack and format after dropping the lock. In store_mode(), split
activate() into a _locked variant to avoid double-locking, and hold
the locks for the modelist walk, mode conversion, activation, and
fb_info->mode assignment together.
Cc: stable@vger.kernel.org # v7.1+
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
fb_set_var() can delete a mode from info->modelist when userspace
passes FB_ACTIVATE_INV_MODE through FBIOPUT_VSCREENINFO. The code
checks that the mode being deleted is not the current info->var and
that fbcon is not using it, but it does not check fb_info->mode.
fb_info->mode may still point into the modelist entry being deleted.
If the entry is freed, later mode sysfs reads through show_mode() can
dereference a stale pointer.
Clear fb_info->mode before calling fb_delete_videomode() when it
matches the mode being removed.
Cc: stable@vger.kernel.org # v7.1+
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
mode_string() uses snprintf() which can return a value larger than the
remaining buffer space. show_modes() accumulates the return value into i
without checking whether i has reached PAGE_SIZE, causing the offset to
advance past the sysfs buffer if the modelist is long enough.
Add a size parameter to mode_string() and use scnprintf() to return
only the bytes actually written. Add an early return when offset
already exceeds the buffer. In show_modes(), stop accumulating once
the buffer is full.
Cc: stable@vger.kernel.org # v7.1+
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
In lparcfg_write(), a count of 0 results in kbuf[] being indexed at -1.
Check for count == 0 in the existing check for count > sizeof(kbuf) and
return -EINVAL if true.
Fixes: 74422e2b19 ("powerpc/pseries: Remove VLA from lparcfg_write()")
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: George Wilson <gcwilson@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
The checks on num_vfs in pseries_pci_sriov_enable() are ANDed where OR
was apparently intended. Change it to OR.
Fixes: 9a7f6b4386 ("powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV")
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Cc: stable@vger.kernel.org # 4.16
Signed-off-by: George Wilson <gcwilson@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
In papr_phy_attest_create_handle(), the params->cmd.length is not
validated before use, which can result in a buffer overlow. Check it and
return -EINVAL if it is either 0 or exceeds sizeof(params->cmd).
Also, params is freed on the success path but not error. Free it on
errors after memory allocation. And free it on negative fd.
Fixes: 86900ab620 ("powerpc/pseries: Add a char driver for physical-attestation RTAS")
Acked-by: Haren Myneni <haren@linux.ibm.com>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Cc: stable@vger.kernel.org # 6.16
Signed-off-by: George Wilson <gcwilson@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Map the email addresses used for previous kernel contributions to the
current OpenAI address. This prevents get_maintainer.pl from listing
historical addresses as patch recipients.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260806-b4-mailman-v1-1-b4d7bc0ffd1c@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sun Jian says:
====================
fix skb length accounting after XDP frag adjustment
This series fixes skb length accounting after an XDP program adjusts its
fragment area, in both the generic XDP path (net/core/dev.c) and the veth
native path (drivers/net/veth.c). When the fragment area is resized,
skb->len and skb->data_len can go out of sync, and in the reproduced UDP
receive path this leaked skb_shared_info contents (including a kernel
pointer) to userspace while truncating real payload.
====================
Link: https://patch.msgid.link/20260804054040.613675-1-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
veth exposes non-linear skb fragments through an xdp_buff. If an XDP
program adjusts the fragment area, veth_xdp_rcv_skb() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size, and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
Additionally, bpf_xdp_pull_data() can advance data_end while leaving
frags present. The skb is then still non-linear, so the old
__skb_put(skb, off) triggers SKB_LINEAR_ASSERT().
Use skb_set_tail_pointer() and update skb->len explicitly instead,
following bpf_prog_run_generic_xdp(). Unlike __skb_put(),
skb_set_tail_pointer() does not require a linear skb.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. A forced-tailroom reproducer also exercises
bpf_xdp_pull_data() with frags still present; the old code triggers
SKB_LINEAR_ASSERT(), while this fix passes 10/10 runs.
Fixes: 718a18a0c8 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb")
Cc: stable@vger.kernel.org
Reported-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://lore.kernel.org/bpf/80687d9c-9c27-494c-b3f2-efd0230b1895@gmail.com/
Suggested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260804054040.613675-3-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Generic XDP exposes non-linear skb fragments through an xdp_buff. If an
XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly.
Fixes: e6d5dbdd20 ("xdp: add multi-buff support for xdp running in generic mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/al9T9Eto%2FhRIzP5W@boxer/
Reviewed-by: Mohsin Bashir <hmohsin@meta.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260804054040.613675-2-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hwprobe vDSO data is populated by the first riscv_hwprobe syscall.
Some values, such as MISALIGNED_VECTOR_PERF, may depend on the async
vector unaligned access speed probe registered by
check_unaligned_access_all_cpus().
That initcall currently runs at late_initcall level. However,
rootfs_initcall enables usermode helpers before late initcalls run, so an
early helper can execute userspace and call riscv_hwprobe first.
In that case complete_hwprobe_vdso_data() consumes the initial
pending_boot_probes reference, populates the vDSO cache, and marks it
ready before the later async probe is registered. The eventual probe
result then cannot update the already-ready cache.
Move check_unaligned_access_all_cpus() to fs_initcall_sync. This still
runs after clocksource_done_booting(), so the ktime_get_mono_fast_ns()
benchmark uses a stable clocksource, but it runs before rootfs_initcall
enables usermode helpers.
Any async hwprobe probe is therefore registered before userspace can
trigger the one-time vDSO cache population.
Cc: stable@vger.kernel.org
Fixes: 6455c6c118 ("riscv: Clean up & optimize unaligned scalar access probe")
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://patch.msgid.link/20260721150511.1607105-1-qirui.001@bytedance.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
- Disable liknk power management on yet another misbehaving WD drive
(Niklas).
- Fix a use after free issue in the pata_sl82c105 driver (Hongyan).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCanZp5gAKCRDdoc3SxdoY
dtQwAP0Yq6NUePN6QaCMJL214S3VVASmM5HaDuj3pECJbXBUxgD+L+i3CkytaJKi
pII90cCwLvXXuRT35HO5XXQGxt3Z5AY=
=CUb4
-----END PGP SIGNATURE-----
Merge tag 'ata-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Disable link power management on yet another misbehaving WD drive
(Niklas)
- Fix a use after free issue in the pata_sl82c105 driver (Hongyan)
* tag 'ata-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_sl82c105: fix bridge revision use-after-free
ata: libata-core: Disable LPM on WDC WD141KFGX-68FH9N0
When cookie authentication is disabled, COOKIE_ECHO restores fixed-size
AUTH fields directly from peer-controlled cookie bytes. A forged RANDOM
length, HMAC list, or CHUNKS list can then reach association consumers
with lengths or identifiers that were never validated against the local
backing arrays.
A forged RANDOM length can cause out-of-bounds reads during key-vector
construction. A forged HMAC identifier also caused a 32-byte write past
a zero-length AUTH chunk, providing a primitive for a local privilege
escalation chain.
Validate the cookie's RANDOM, HMACS, and CHUNKS parameters at the cookie
trust boundary before copying them into the association. Reject invalid
types, malformed lengths, unsupported HMAC identifiers, HMAC lists
without SHA1, and forbidden chunk ids.
Fixes: bbd0d59809 ("[SCTP]: Implement the receive and verification of AUTH chunk")
Fixes: 1f485649f5 ("[SCTP]: Implement SCTP-AUTH internals")
Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260804200042.2412009-1-Jeremy.Jean@oss.cyber.gouv.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge updates related to system sleep handling and runtime PM, a power
capping update, and power management tools updates for 7.3-rc1:
- Rename the PM core module parameter prefix to "pm" and allow the PM
transition (DPM) watchdog to be disabled by default (Tzung-Bi Shih)
- Fix off-by-one in wakelocks number limit check in the system sleep
sysfs interface (Haowen Tu)
- Remove kernel-doc markings from helper descriptions in the core
hibernation code (Adi Nata)
- Use %pe to print error pointer values in the hibernation core (Ronan
Marchal)
- Fix memory leak in snapshot_write_next() error path (Malaya Kumar
Rout)
- Delay allocating and linking the next swap_map_page in the
hibernation image saving code until another image page actually
needs to be recorded (Haesung Kim)
- Stop setting runtime_error on runtime resume callback failures to
allow drivers to recover from resume issues (Praveen Talari)
- Handle PMU registration failure during probe in the intel_rapl_tpmi
driver (Sumeet Pawnikar)
- Avoid optional imports in intel_pstate_tracer unless they are really
needed (Yousef Alhouseen)
- Add generic CPPC performance display to the cpupower utility, build
and call CPPC information on non-AMD processors, make cpupower print
kernel and hardware frequency information, and add libm to cpupower
for generic CPPC view (Jeremy Linton)
- Remove conditional return with no effect from cpupower (Sang-Heon
Jeon)
* pm-sleep:
PM: sleep: Allow disabling DPM watchdog by default
PM: sleep: Rename module parameters prefix to "pm"
PM: hibernate: swap: defer linking the next map page
PM: hibernate: Fix memory leak in snapshot_write_next() error path
PM: hibernate: Use %pe to print error pointer values
PM: hibernate: Remove kernel-doc markings from helper descriptions
PM: sleep: Fix off-by-one in wakelocks number limit check
* pm-runtime:
PM: runtime: Only set runtime_error on suspend callback failures
* pm-powercap:
powercap: intel_rapl_tpmi: Handle PMU registration failure during probe
* pm-tools:
cpupower: remove conditional return with no effect
tools/power: intel_pstate_tracer: avoid optional imports for help
cpupower: Add libm to cpupower for generic CPPC view
cpupower: Print kernel and hardware frequency information
cpupower: Build and call CPPC information on non-AMD processors
cpupower: Add generic CPPC performance display
Merge updates of the thermal core, thermal drivers for Intel platforms
and the thermometer utility for 7.3-rc1:
- Use sysfs_emit_at() in trans_table_show() (Thorsten Blum)
- Remove hwmon class devices created for thermal zones when the thermal
zone devices holding them are removed (Rafael Wysocki)
- Add support for the Directed Package-level Thermal Interrupt to
the Intel thermal throttling driver to allow package-level thermal
interrupts to go to one specific CPU in a processor package instead
of going to all of the CPUs in it (Ricardo Neri)
- Clean up RFIM groups on DVFS failure and clean up ODVP on probe
failures in the int340x thermal driver (Pengpeng Hou)
- Remove redundant dev_err() from the int340x thermal driver and the
bxt_pmic driver (Pan Chuang)
- Simplify ptc_temperature_write() in the int340x thermal driver by
using kstrtou32_from_user() (Dmitry Antipov)
- Close fd on realloc() failure in the thermometer utility (Amarjeet)
* thermal-core:
thermal: sysfs: Use sysfs_emit_at() in trans_table_show()
* thermal-hwmon:
thermal: hwmon: Remove hwmon class device along with its parent
* thermal-intel:
thermal: intel: int340x: simplify ptc_temperature_write()
thermal: intel: bxt_pmic: Remove redundant dev_err()
thermal: intel: int340x: Remove redundant dev_err()
thermal: intel: int3400: clean up ODVP on probe failures
thermal: intel: int340x: clean up RFIM groups on DVFS failure
thermal: intel: Add a syscore shutdown callback for kexec reboot
thermal: intel: Add syscore callbacks for suspend and resume
thermal: intel: Enable the Directed Package-level Thermal Interrupt
thermal: intel: Add resources to handle directed package-level thermal interrupts
x86/thermal: Add bit definitions for Intel Directed Package Thermal Interrupt
* thermal-tools:
tools/thermal/thermometer: close fd on realloc() failure
- Avoid using deep idle states during initialization in the intel_idle
driver to work around device handling issues (Rafael Wysocki)
- Fix and refactor the ACPI processor driver code related to ACPI _LPI
support and add ACPI _LPI support to intel_idle based on that ACPI
processor driver update (Rafael Wysocki)
* pm-cpuidle:
intel_idle: Avoid using deep idle states during initialization
intel_idle: Update documentation after adding ACPI _LPI support
intel_idle: Add ACPI _LPI support
intel_idle: Prepare for adding ACPI _LPI support
ACPI: processor: idle: Add switch for strict _LPI processing
ACPI: processor: idle: Relocate acpi_processor_extract_lpi_info()
ACPI: processor: idle: Introduce acpi_processor_extract_lpi_info()
ACPI: processor: idle: Introduce too_many_states() for _LPI
ACPI: processor: idle: Rework flatten_lpi_states()
ACPI: processor: idle: Rearrange loop in acpi_processor_get_lpi_info()
ACPI: processor: idle: Drop redundant _LPI presence checks
ACPI: processor: idle: Rework first-level _LPI states processing
ACPI: processor: idle: Rearrange acpi_processor_get_lpi_info()
ACPI: processor: idle: Introduce lpi_state_debug()
ACPI: processor: idle: Split acpi_processor_evaluate_lpi()
ACPI: processor: idle: Rearrange acpi_processor_evaluate_lpi()
ACPI: processor: idle: Unify debug in acpi_processor_evaluate_lpi()
ACPI: processor: idle: Ignore _LPI states with SYSTEMIO entry method
ACPI: processor: idle: Expand _LPI package sanity checks
Qualcomm fixes: some incorrectly defined groups in IPQ9650,
two pins needing to be marked as GPIO in IPQ806X.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmp2K4kACgkQQRCzN7AZ
XXNfeRAAtZL/qwyt03wCaPCnpUVmtkcAdoKSKteUbGOf73w9VlEal8gZTY6K/EiE
gCiLGJqBoB7cZqDUlt7wnv2SeW08P7NCwZz7QGWG728cx2c8gUrWtxUHbNcDrhps
UpWIDF1E3khGDGki726nq2Qo1bYAG57tEVZtRsUjMTb+XQQI9JQKpvS3QECxTXwD
f/QLUbkT5rRuOqXq+PQzCoD3zSkZTCWgJIL+B2uC+/CuHK682FPC+qa19i4Xdeju
RZBbj6oEvt5jL52qq/jtFlRViUrdxPBb6ju1+2H3g2AUVLZe9kbSvbzO0XzO9Qvq
dfLHRLBm9CcSBIcYJJwC1dVhh2Ekn5o87cxEQzBajpEaErTAac/xmblkKRKkpX/u
VQTxH3IWs7ypoEB9u8c/nt6VixnvALJY/1ldznSANUstnSYrIO+mGQVDPqbfL41o
K/JxaNvIKYQHfOpGcWG69hVf0ZP+NSsftfKubapiK0NO4cYnqzFpazfAvqL06Jeg
jRiE0K4QWe/vraYXW/iXOw8Zb+IQAN3Z3w5KKeJg7qtPiYEdoyYp94mI3HQF5hdm
hh42y0CIK3J9uXdE+s+5iNq65HGNZDzKceQ45j+Aof6w1ZhokwB3iJ4z7iQzNNgs
7VtSnTDWaqF2PS34gwLv36dAoeQ8qT33bmzVPA4xOwnIOJl2wfo=
=8MB1
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Qualcomm fixes: some incorrectly defined groups in IPQ9650, two pins
needing to be marked as GPIO in IPQ806X"
* tag 'pinctrl-v7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: ipq806x: mark pci reset as a GPIO pin function
pinctrl: qcom: ipq806x: mark gpio as a GPIO pin function
pinctrl: qcom: ipq9650: fix audio_sec_mclk_in1/out1 group pins
Merge cpufreq updates for 7.3-rc1:
- Minor fixes and cleanups in assorted cpufreq drivers (Dan Carpenter,
Guru Das Srinagesh, Haoxiang Li, Karl Mehltretter, Sasha Finkelstein,
and Pan Chuang)
- Fix cpufreq table creation and bios_limits() callback in the Rust
bindings (Priya Bala Govindasamy)
- Add IPQ5210 support to qcom-nvmem driver (Varadarajan Narayanan)
- Adjust the .adjust_perf() cpufreq driver callback to allow the
maximum performance value to be passed to drivers and update the
intel_pstate driver to use it (Rafael Wysocki)
- Set policy->cur to the actual requested frequency in the intel_pstate
driver when the performance policy is used (Rafael Wysocki)
- Simplify HWP handling on Broadwell processors in intel_pstate (Rafael
Wysocki)
- Fix setting minimum P-state at init time in intel_pstate (Rafael
Wysocki)
- Consolidate frequency values computation in intel_pstate and clean up
code in that driver (Rafael Wysocki)
- Add missing kernel-doc desciptions for structure and union members in
the amd-pstate driver (David Vernet)
- Handle missing policy in dynamic EPP callbacks in the amd-pstate
driver (EDAMAMEX)
- Introduce EXPORT_SYMBOL_FOR_PSTATE_UT() to export amd-pstate driver
symbols to the amd-pstate-ut subdriver (K Prateek Nayak)
- Add dynamic EPP as an "energy_performance_preference" mode in
amd-pstate, remove the "amd_dynamic_epp" kernel command line option
and the "dynamic_epp" sysfs attribute, and update the dynamic_epp
documentation accordingly (K Prateek Nayak)
- Add unit tests for CPPC Performance Priority and the "dynamic" EPP
mode in the amd-pstate driver (K Prateek Nayak)
- Set min_limit_freq based on bios_min_perf in amd-pstate and remove
the defensive check for bios_min_perf from it (K Prateek Nayak)
- Fix EPP return type and handle errors in amd-pstate during
initialization, toggle auto_sel in active mode on shared memory
systems, and cache the firmware programmed EPP value (Marco Scardovi)
- Skip tests in amd-pstate-ut if the amd-pstate driver is not in active
use (Qianheng Peng)
- Replace sprintf() with sysfs_emit() in sysfs show in the cpufreq
schedutil governor and fix a self-contradictory comment in
sugov_iowait_apply() (Zhongqiu Han)
- Fix the usage example for the sampling_rate tunable of the ondemand
cpufreq governor in admin-guide (wangxiaodong)
* pm-cpufreq: (40 commits)
cpufreq: imx6q: fix out-of-bounds write when probed more than once
cpufreq: imx6q: fix devres accumulation across driver rebind
rust: cpufreq: Fix temporary write in Registration::bios_limit_callback
rust: cpufreq: Add CPUFREQ_TABLE_END as last table entry in TableBuilder::to_table
cpufreq: intel_pstate: Adjust policy->cur in active mode to policy
cpufreq/amd-pstate: Document missing kernel-doc members
cpufreq/amd-pstate-ut: Add unit test for CPPC Performance Priority
cpufreq/amd-pstate-ut: Add unit test for "dynamic" EPP mode
cpufreq/amd-pstate: Reduce the scope of exported symbols
Documentation/amd-pstate: Update dynamic_epp documentation with new behavior
cpufreq/amd-pstate: Remove "amd_dynamic_epp" cmdline and "dynamic_epp" sysfs
cpufreq/amd-pstate: Add dynamic EPP as an "energy_performance_preference" mode
cpufreq/amd-pstate: Extract platform profile to EPP conversion into a helper
cpufreq/amd-pstate: Remove the defensive check for bios_min_perf
cpufreq/amd-pstate: Set min_limit_freq based on bios_min_perf
cpufreq: apple-soc: Calculate frequency as a 64-bit value
kselftest: cpufreq: Backup and restore governor for sptests
selftests/cpufreq: Remove unnecessary sudo from quick_shuffle()
selftests/cpufreq: Remove unused local variables from switch_show_governor()
cpufreq/amd-pstate: handle missing policy in dynamic EPP callbacks
...
Merge cpufreq test updates for 7.3-rc1:
- Backup and restore governor for cpufreq sptests (Yiwei Lin)
- Remove unnecessary sudo from quick_shuffle() and remove unused local
variables from switch_show_governor() in cpufreq selftests (Jinseok
Kim)
* pm-cpufreq-tests:
kselftest: cpufreq: Backup and restore governor for sptests
selftests/cpufreq: Remove unnecessary sudo from quick_shuffle()
selftests/cpufreq: Remove unused local variables from switch_show_governor()
Merge irqchip changes related to ACPI support that are needed to enable
GICv5 IWB ACPI probe ordering detection on ARM, including the addition
of acpi_device_clear_deps() and RISC-V interrupt controller management
code refactoring to extract generic code from it into the common ACPI
IRQ code (Lorenzo Pieralisi)
* acpi-irqchip:
irqchip/gic-v5: Enable GICv5 IWB ACPI probe ordering detection
ACPI/IORT: Implement ACPI infrastructure to enable GICv5 IWB probe deferral
ACPI: irq: Move RISC-V interrupt controllers autodep to ACPI IRQ code
ACPI: RISC-V: Fix riscv_acpi_add_prt_dep() loop handling
ACPI: RISC-V: Check acpi_get_handle() status in riscv_acpi_add_prt_dep()
ACPI: RISC-V: Fix riscv_acpi_irq_get_dep() loop termination
ACPI: Add acpi_device_clear_deps() helper function
Merge and ACPI support update related to NUMA, miscellaneous updates
related to ACPI support, and PNP updates for 7.3-rc1:
- Remove a node_set() call that is redundant from
acpi_parse_memory_affinity() (Sang-Heon Jeon)
- Prevent kernel-doc warnings by converting 2 function description
comments to kernel-doc format (Randy Dunlap)
- Fix docs build error in the ACPI admin-guide documentation (Randy
Dunlap)
- Replace __get_free_page() with kmalloc() in the code handling ACPI
NVS memory during system suspend/resume (Mike Rapoport)
- Fix card device cleanup on registration failure in the core PNP
code (Yuho Choi)
- Dropi an unused assignment of pnp_device_id driver data (Uwe
Kleine-König)
* acpi-numa:
ACPI: NUMA: remove redundant node_set() call
* acpi-misc:
ACPI: pmtmr: Convert to kernel-doc format
docs: ACPI: DSD: motorcomm: fix docs build error
ACPI: NVS: replace __get_free_page() with kmalloc()
* pnp:
PNP: Fix card device cleanup on registration failure
PNP: Drop unused assignment of pnp_device_id driver data
Jisheng Zhang <jszhang@kernel.org> says:
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards or
__maybe_unused.
Compiled testd for arm, arm64, riscv and riscv64 with below
combinations:
!PM && !PM_SLEEP
PM && !PM_SLEEP
PM && PM_SLEEP
Link: https://patch.msgid.link/20260803142003.12857-1-jszhang@kernel.org
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-40-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
At the same time, for pch_spi_pd_driver, we also switch to modern
driver.pm for pm ops.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-39-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-38-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards or
__maybe_unused.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-37-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-36-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-35-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-34-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards or
__maybe_unused.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-33-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-32-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-31-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-30-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-29-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-28-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-27-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-26-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-25-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-24-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-23-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-22-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-21-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-20-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-19-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-18-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
