Commit graph

563,433 commits

Author SHA1 Message Date
Guoqing Jiang
b83d51c078 md-cluster: init completion within lockres_init
We should init completion within lockres_init, otherwise
completion could be initialized more than one time during
it's life cycle.

Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:41:50 +02:00
Guoqing Jiang
66099bb0ee md-cluster: fix deadlock issue on message lock
There is problem with previous communication mechanism, and we got below
deadlock scenario with cluster which has 3 nodes.

	Sender                	    Receiver        		Receiver

	token(EX)
       message(EX)
      writes message
   downconverts message(CR)
      requests ack(EX)
		                  get message(CR)            gets message(CR)
                		  reads message                reads message
		               requests EX on message    requests EX on message

To fix this problem, we do the following changes:

1. the sender downconverts MESSAGE to CW rather than CR.
2. and the receiver request PR lock not EX lock on message.

And in case we failed to down-convert EX to CW on message, it is better to
unlock message otherthan still hold the lock.

Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Lidong Zhong <ldzhong@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:41:41 +02:00
Guoqing Jiang
dc737d7c3d md-cluster: transfer the resync ownership to another node
When node A stops an array while the array is doing a resync, we need
to let another node B take over the resync task.

To achieve the goal, we need the A send an explicit BITMAP_NEEDS_SYNC
message to the cluster. And the node B which received that message will
invoke __recover_slot to do resync.

Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:41:12 +02:00
Guoqing Jiang
05cd0e5176 md-cluster: split recover_slot for future code reuse
Make recover_slot as a wraper to __recover_slot, since the
logic of __recover_slot can be reused for the condition
when other nodes need to take over the resync job.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:40:41 +02:00
Guoqing Jiang
b89f704a8d md-cluster: use %pU to print UUIDs
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:40:30 +02:00
Sasha Levin
25b2edfa3b md: setup safemode_timer before it's being used
We used to set up the safemode_timer timer in md_run. If md_run
would fail before the timer was set up we'd end up trying to modify
a timer that doesn't have a callback function when we access safe_delay_store,
which would trigger a BUG.

neilb: delete init_timer() call as setup_timer() does that.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:39:39 +02:00
NeilBrown
6cbd81487f md/raid5: handle possible race as reshape completes.
It is possible (though unlikely) for a reshape to be
interrupted between the time that end_reshape is called
and the time when raid5_finish_reshape is called.

This can leave conf->reshape_progress set to MaxSector,
but mddev->reshape_position not.

This combination confused reshape_request() when ->reshape_backwards.
As conf->reshape_progress is so high, it seems the reshape hasn't
really begun.  But assuming MaxSector is a valid address only
leads to sorrow.

So ensure reshape_position and reshape_progress both agree,
and add an extra check in reshape_request() just in case they don't.

Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:38:59 +02:00
NeilBrown
5ed1df2eac md: sync sync_completed has correct value as recovery finishes.
There can be a small window between the moment that recovery
actually writes the last block and the time when various sysfs
and /proc/mdstat attributes report that it has finished.
During this time, 'sync_completed' can have the wrong value.
This can confuse monitoring software.

So:
 - don't set curr_resync_completed beyond the end of the devices,
 - set it correctly when resync/recovery has completed.

Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:38:17 +02:00
NeilBrown
c5e19d906a md: be careful when testing resync_max against curr_resync_completed.
While it generally shouldn't happen, it is not impossible for
curr_resync_completed to exceed resync_max.
This can particularly happen when reshaping RAID5 - the current
status isn't copied to curr_resync_completed promptly, so when it
is, it can exceed resync_max.
This happens when the reshape is 'frozen', resync_max is set low,
and reshape is re-enabled.

Taking a difference between two unsigned numbers is always dangerous
anyway, so add a test to behave correctly if
   curr_resync_completed > resync_max

Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:37:33 +02:00
NeilBrown
a4a3d26d87 md: set MD_RECOVERY_RECOVER when starting a degraded array.
This ensures that 'sync_action' will show 'recover' immediately the
array is started.  If there is no spare the status will change to
'idle' once that is detected.

Clear MD_RECOVERY_RECOVER for a read-only array to ensure this change
happens.

This allows scripts which monitor status not to get confused -
particularly my test scripts.

Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:37:03 +02:00
NeilBrown
c74c0d760e md/raid5: remove incorrect "min_t()" when calculating writepos.
This code is calculating:
  writepos, which is the furthest along address (device-space) that we
     *will* be writing to
  readpos, which is the earliest address that we *could* possible read
     from, and
  safepos, which is the earliest address in the 'old' section that we
     might read from after a crash when the reshape position is
     recovered from metadata.

  The first is a precise calculation, so clipping at zero doesn't
  make sense.  As the reshape position is now guaranteed to always be
  a multiple of reshape_sectors and as we already BUG_ON when
  reshape_progress is zero, there is no point in this min_t() call.

  The readpos and safepos are worst case - actual value depends on
  precise geometry.  That worst case could be negative, which is only
  a problem because we are storing the value in an unsigned.
  So leave the min_t() for those.

Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:36:06 +02:00
NeilBrown
05256d9884 md/raid5: strengthen check on reshape_position at run.
When reshaping, we work in units of the largest chunk size.
If changing from a larger to a smaller chunk size, that means we
reshape more than one stripe at a time.  So the required alignment
of reshape_position needs to take into account both the old
and new chunk size.

This means that both 'here_new' and 'here_old' are calculated with
respect to the same (maximum) chunk size, so testing if they are the
same when delta_disks is zero becomes pointless.

Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:34:21 +02:00
NeilBrown
3cb5edf454 md/raid5: switch to use conf->chunk_sectors in place of mddev->chunk_sectors where possible
The chunk_sectors and new_chunk_sectors fields of mddev can be changed
any time (via sysfs) that the reconfig mutex can be taken.  So raid5
keeps internal copies in 'conf' which are stable except for a short
locked moment when reshape stops/starts.

So any access that does not hold reconfig_mutex should use the 'conf'
values, not the 'mddev' values.
Several don't.

This could result in corruption if new values were written at awkward
times.

Also use min() or max() rather than open-coding.

Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:32:48 +02:00
NeilBrown
5cac6bcb93 md/raid5: always set conf->prev_chunk_sectors and ->prev_algo
These aren't really needed when no reshape is happening,
but it is safer to have them always set to a meaningful value.
The next patch will use ->prev_chunk_sectors without checking
if a reshape is happening (because that makes the code simpler),
and this patch makes that safe.

Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:32:25 +02:00
NeilBrown
02ec50265b md/raid10: fix a few typos in comments
Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:32:09 +02:00
NeilBrown
92140480ed md/raid5: consider updating reshape_position at start of reshape.
md/raid5 only updates ->reshape_position (which is stored in
metadata and is authoritative) occasionally, but particularly
when getting closed to ->resync_max as it must be correct
when ->resync_max is reached.

When mdadm tries to stop an array which is reshaping it will:
 - freeze the reshape,
 - set resync_max to where the reshape has reached.
 - unfreeze the reshape.
When this happens, the reshape is aborted and then restarted.

The restart doesn't check that resync_max is close, and so doesn't
update ->reshape_position like it should.
This results in the reshape stopping, but ->reshape_position being
incorrect.

So on that first call to reshape_request, make sure ->reshape_position
is updated if needed.

Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:31:20 +02:00
NeilBrown
985ca973b6 md: close some races between setting and checking sync_action.
When checking sync_action in a script, we want to be sure it is
as accurate as possible.
As resync/reshape etc doesn't always start immediately (a separate
thread is scheduled to do it), it is best if 'action_show'
checks if MD_RECOVER_NEEDED is set (which it does) and in that
case reports what is likely to start soon (which it only sometimes
does).

So:
 - report 'reshape' if reshape_position suggests one might start.
 - set MD_RECOVERY_RECOVER in raid1_reshape(), because that is very
   likely to happen next.

Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:30:40 +02:00
NeilBrown
f7851be736 md: Keep /proc/mdstat reporting recovery until fully DONE.
Currently when a recovery completes, mdstat shows that it has finished
before the new device is marked as a full member.  Because of this it
can appear to a script that the recovery finished but the array isn't
in sync.

So while MD_RECOVERY_DONE is still set, keep mdstat reporting "recovery".
Once md_reap_sync_thread() completes, the spare will be active and then
MD_RECOVERY_DONE will be cleared.

To ensure this is race-free, set MD_RECOVERY_DONE before clearning
curr_resync.

Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:29:09 +02:00
Ard Biesheuvel
0e833e697b md/raid6: delta syndrome for ARM NEON
This implements XOR syndrome calculation using NEON intrinsics.
As before, the module can be built for ARM and arm64 from the
same source.

Relative performance on a Cortex-A57 based system:

  raid6: int64x1  gen()   905 MB/s
  raid6: int64x1  xor()   881 MB/s
  raid6: int64x2  gen()  1343 MB/s
  raid6: int64x2  xor()  1286 MB/s
  raid6: int64x4  gen()  1896 MB/s
  raid6: int64x4  xor()  1321 MB/s
  raid6: int64x8  gen()  1773 MB/s
  raid6: int64x8  xor()  1165 MB/s
  raid6: neonx1   gen()  1834 MB/s
  raid6: neonx1   xor()  1278 MB/s
  raid6: neonx2   gen()  2528 MB/s
  raid6: neonx2   xor()  1942 MB/s
  raid6: neonx4   gen()  2888 MB/s
  raid6: neonx4   xor()  2334 MB/s
  raid6: neonx8   gen()  2957 MB/s
  raid6: neonx8   xor()  2232 MB/s
  raid6: using algorithm neonx8 gen() 2957 MB/s
  raid6: .... xor() 2232 MB/s, rmw enabled

Cc: Markus Stockhausen <stockhausen@collogia.de>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31 19:29:05 +02:00
Teodora Baluta
47196620c8 iio: mxc4005: add data ready trigger for mxc4005
Add iio trigger for the data ready interrupt that signals new
measurements for the X, Y and Z axes.

Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 17:58:49 +01:00
Teodora Baluta
1ce0eda0f7 iio: mxc4005: add triggered buffer mode for mxc4005
This patch adds support for buffered readings for the 3-axis
accelerometer mxc4005.

Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 17:36:56 +01:00
Teodora Baluta
077377fc4f iio: accel: add support for mxc4005 accelerometer
This patch adds support for Memsic MXC4005XC 3-axis accelerometer. The
current implementation is a minimal one as it adds raw readings for the
three axes and setting scale from userspace.

Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 17:32:05 +01:00
Linus Torvalds
2f37d65a6a Staging driver patches for 4.3-rc1
Here is the big staging driver updates for 4.3-rc1.
 
 Lots of things all over the place, almost all of them trivial fixups and
 changes.  The usual IIO updates and new drivers and we have added the
 MOST driver subsystem which is getting cleaned up in the tree.  The
 ozwpan driver is finally being deleted as it is obviously abandoned and
 no one cares about it.
 
 Full details are in the shortlog, and all of these have been in
 linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlXV9S8ACgkQMUfUDdst+ykAwQCfSOc+y5AG7+63cIdnLwRS3MdZ
 p3EAoLoJXl8+5hfIsRBlwXyLEkN33f/7
 =dD9z
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here is the big staging driver updates for 4.3-rc1.

  Lots of things all over the place, almost all of them trivial fixups
  and changes.  The usual IIO updates and new drivers and we have added
  the MOST driver subsystem which is getting cleaned up in the tree.
  The ozwpan driver is finally being deleted as it is obviously
  abandoned and no one cares about it.

  Full details are in the shortlog, and all of these have been in
  linux-next with no reported issues"

* tag 'staging-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (912 commits)
  staging/lustre/o2iblnd: remove references to ib_reg_phsy_mr()
  staging: wilc1000: fix build warning with setup_timer()
  staging: wilc1000: remove DECLARE_WILC_BUFFER()
  staging: wilc1000: remove void function return statements that are not useful
  staging: wilc1000: coreconfigurator.c: fix kmalloc error check
  staging: wilc1000: coreconfigurator.c: use kmalloc instead of WILC_MALLOC
  staging: wilc1000: remove unused codes of gps8ConfigPacket
  staging: wilc1000: remove unnecessary void pointer cast
  staging: wilc1000: remove WILC_NEW and WILC_NEW_EX
  staging: wilc1000: use kmalloc instead of WILC_NEW
  staging: wilc1000: Process WARN, INFO options of debug levels from user
  staging: wilc1000: remove unneeded tstrWILC_MsgQueueAttrs typedef
  staging: wilc1000: delete wilc_osconfig.h
  staging: wilc1000: delete wilc_log.h
  staging: wilc1000: delete wilc_timer.h
  staging: wilc1000: remove WILC_TimerStart()
  staging: wilc1000: remove WILC_TimerCreate()
  staging: wilc1000: remove WILC_TimerDestroy()
  staging: wilc1000: remove WILC_TimerStop()
  staging: wilc1000: remove tstrWILC_TimerAttrs typedef
  ...
2015-08-31 09:24:06 -07:00
Markus Pargmann
b1d125cc62 iio: bmg160: Add SPI driver
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 17:06:11 +01:00
Markus Pargmann
13426454b6 iio: bmg160: Separate i2c and core driver
This patch separates the core driver using regmap and the i2c driver
which creates the i2c regmap. Also in the Kconfig file BMG160 and
BMG160_I2C are separate now.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 17:04:23 +01:00
Matt Ranostay
cb119d5350 iio: proximity: add support for PulsedLight LIDAR
Add support for the PulsedLight LIDAR rangefinder sensor which allows
high speed (over 300Hz) distance measurements using Barker Coding within
40 meter range.

Support only tested on the "blue label" rev 2, but may work using low
sample frequencies on the original version.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 16:48:16 +01:00
Matt Ranostay
12280bd3d5 devicetree: add PulsedLight vendor + device docs
Add pulsedlight vendor to vendor-prefixes.txt, and LIDAR device
documentation to trivial-devices.txt

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 16:48:11 +01:00
Linus Torvalds
1af115d675 Driver core patches for 4.3-rc1
Here is the new patches for the driver core / sysfs for 4.3-rc1.
 
 Very small number of changes here, all the details are in the shortlog,
 nothing major happening at all this kernel release, which is nice to
 see.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlXV9EwACgkQMUfUDdst+ylv1ACgj7srYyvumehX1zfRVzEWNuez
 chQAoKHnSpDMME/WmhQQRxzQ5pfd1Pni
 =uGHg
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the new patches for the driver core / sysfs for 4.3-rc1.

  Very small number of changes here, all the details are in the
  shortlog, nothing major happening at all this kernel release, which is
  nice to see"

* tag 'driver-core-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  bus: subsys: update return type of ->remove_dev() to void
  driver core: correct device's shutdown order
  driver core: fix docbook for device_private.device
  selftests: firmware: skip timeout checks for kernels without user mode helper
  kernel, cpu: Remove bogus __ref annotations
  cpu: Remove bogus __ref annotation of cpu_subsys_online()
  firmware: fix wrong memory deallocation in fw_add_devm_name()
  sysfs.txt: update show method notes about sprintf/snprintf/scnprintf usage
  devres: fix devres_get()
2015-08-31 08:47:40 -07:00
Xiong Zhang
d8e19f99d3 drm/i915/skl: Adding DDI_E power well domain
From B spec, DDI_E port belong to PowerWell 2, but
DDI_E share the powerwell_req/staus register bit with
DDI_A which belong to DDI_A_E_POWER_WELL.

In order to communicate with the connector on DDI-E, both
DDI_A_E_POWER_WELL and POWER_WELL_2 must be enabled.

Currently intel_dp_power_get(DDI_E) only enable
DDI_A_E_POWER_WELL, this patch will not only enable
DDI_a_E_POWER_WELL but also enable POWER_WELL_2.

This patch also fix the DDI-E hotplug function.

Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31 18:40:48 +03:00
Anatol Pomozov
d76f41982f ASoC: Document snd-soc-dummy-dai purpose
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-31 16:40:26 +01:00
Alex Deucher
7040c399ae drm/radeon/native: Send out the full AUX address
AUX addresses are 20 bits long. Send out the entire address instead of
just the low 16 bits.

Port of:
drm/radeon/atom: Send out the full AUX address
to radeon non-atom aux path

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2015-08-31 11:38:30 -04:00
Ville Syrjälä
3f8340cc72 drm/radeon/atom: Send out the full AUX address
AUX addresses are 20 bits long. Send out the entire address instead of
just the low 16 bits.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2015-08-31 11:38:29 -04:00
Rodrigo Vivi
477ec3283c drm/i915: eDP can be present on DDI-E
Enable eDP on DDI-E.

Also let's remove duplicated definitions to avoid later confusion.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31 18:36:38 +03:00
Linus Torvalds
1c00038c76 Char/Misc driver patches for 4.3-rc1
Here's the "big" char/misc driver update for 4.3-rc1.
 
 Not much really interesting here, just a number of little changes all
 over the place, and some nice consolidation of the nvmem drivers to a
 common framework.  As usual, the mei drivers stand out as the largest
 "churn" to handle new devices and features in their hardware.
 
 All have been in linux-next for a while with no issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlXV844ACgkQMUfUDdst+ymYfQCgmDKjq3fsVHCxNZPxnukFYzvb
 xZkAnRb8fuub5gVQFP29A+rhyiuWD13v
 =Bq9K
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg KH:
 "Here's the "big" char/misc driver update for 4.3-rc1.

  Not much really interesting here, just a number of little changes all
  over the place, and some nice consolidation of the nvmem drivers to a
  common framework.  As usual, the mei drivers stand out as the largest
  "churn" to handle new devices and features in their hardware.

  All have been in linux-next for a while with no issues"

* tag 'char-misc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
  auxdisplay: ks0108: initialize local parport variable
  extcon: palmas: Fix build break due to devm_gpiod_get_optional API change
  extcon: palmas: Support GPIO based USB ID detection
  extcon: Fix signedness bugs about break error handling
  extcon: Drop owner assignment from i2c_driver
  extcon: arizona: Simplify pdata symantics for micd_dbtime
  extcon: arizona: Declare 3-pole jack if we detect open circuit on mic
  extcon: Add exception handling to prevent the NULL pointer access
  extcon: arizona: Ensure variables are set for headphone detection
  extcon: arizona: Use gpiod inteface to handle micd_pol_gpio gpio
  extcon: arizona: Add basic microphone detection DT/ACPI bindings
  extcon: arizona: Update to use the new device properties API
  extcon: palmas: Remove the mutually_exclusive array
  extcon: Remove optional print_state() function pointer of struct extcon_dev
  extcon: Remove duplicate header file in extcon.h
  extcon: max77843: Clear IRQ bits state before request IRQ
  toshiba laptop: replace ioremap_cache with ioremap
  misc: eeprom: max6875: clean up max6875_read()
  misc: eeprom: clean up eeprom_read()
  misc: eeprom: 93xx46: clean up eeprom_93xx46_bin_read/write
  ...
2015-08-31 08:34:13 -07:00
Dan Carpenter
7d87b3c5c8 iio: tsl4531: fix error handling in tsl4531_check_id()
The tsl4531_check_id() function returned 1 on "found" and 0 on "not
found" and negative error codes on failure.  This was non-standard and
bug prone.  The caller treated all non-zero values including error codes
as "found".

This patch fixes it by changing the tsl4531_check_id() to return zero on
success or a negative error code, and updates the caller.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 16:29:52 +01:00
Rodrigo Vivi
2800e4c228 drm/i915/skl: Enable DDI-E
There are OEMs using DDI-E out there,
so let's enable it.

Unfortunately there is no detection bit for DDI-E
So we need to rely on VBT for that.

I also need to give credits to Xiong since before seing
his approach to check info->support_* I was creating an ugly
vbt->ddie_sfuse_strap in order to propagate the ddi presence info

v2: Rebased as last patch in the series. since all other patches
in this series are needed for anything working propperly on DDI-E.

Credits-to: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
Cc: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31 18:28:09 +03:00
Linus Torvalds
44e98edcd1 A very small release for x86 and s390 KVM.
s390: timekeeping changes, cleanups and fixes
 
 x86: support for Hyper-V MSRs to report crashes, and a bunch of cleanups.
 
 One interesting feature that was planned for 4.3 (emulating the local
 APIC in kernel while keeping the IOAPIC and 8254 in userspace) had to
 be delayed because Intel complained about my reading of the manual.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJVznW4AAoJEL/70l94x66Dt+gH/3vydhh6kv+mKhnR+kADaGfM
 gaunw0CUpJLU6gkOkYOm5M32WGhsT9Hd3WtRTJO6PhSo7cQ88hMx24u4XAffoewo
 Os5tDwAaHeV2enVSTri6xX8e2F2mgPDghGcYJPUBwnmMjRzZ8tj2VHUcbxqVT6Pb
 pX3V8ZxOZ81+ACZU2tdNRzLUd2H1v4d74gtVS7ove1Vb0CvPOBdHf1KQuUCUa2Pi
 73fvnaEuSaFYtSWZIP1PYxLnsQHpApH3Kco/5kHeqUPpYaGa/g2bnfncHRw20Svr
 gb3opwbfyiq91xfGbRVR3+E63Cw4G6aTl5MDNv9UFJ+xFKuj8WJ72xXXTSwzUi4=
 =HgT+
 -----END PGP SIGNATURE-----

Merge tag 'kvm-4.3-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "A very small release for x86 and s390 KVM.

   - s390: timekeeping changes, cleanups and fixes

   - x86: support for Hyper-V MSRs to report crashes, and a bunch of
     cleanups.

  One interesting feature that was planned for 4.3 (emulating the local
  APIC in kernel while keeping the IOAPIC and 8254 in userspace) had to
  be delayed because Intel complained about my reading of the manual"

* tag 'kvm-4.3-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
  x86/kvm: Rename VMX's segment access rights defines
  KVM: x86/vPMU: Fix unnecessary signed extension for AMD PERFCTRn
  kvm: x86: Fix error handling in the function kvm_lapic_sync_from_vapic
  KVM: s390: Fix assumption that kvm_set_irq_routing is always run successfully
  KVM: VMX: drop ept misconfig check
  KVM: MMU: fully check zero bits for sptes
  KVM: MMU: introduce is_shadow_zero_bits_set()
  KVM: MMU: introduce the framework to check zero bits on sptes
  KVM: MMU: split reset_rsvds_bits_mask_ept
  KVM: MMU: split reset_rsvds_bits_mask
  KVM: MMU: introduce rsvd_bits_validate
  KVM: MMU: move FNAME(is_rsvd_bits_set) to mmu.c
  KVM: MMU: fix validation of mmio page fault
  KVM: MTRR: Use default type for non-MTRR-covered gfn before WARN_ON
  KVM: s390: host STP toleration for VMs
  KVM: x86: clean/fix memory barriers in irqchip_in_kernel
  KVM: document memory barriers for kvm->vcpus/kvm->online_vcpus
  KVM: x86: remove unnecessary memory barriers for shared MSRs
  KVM: move code related to KVM_SET_BOOT_CPU_ID to x86
  KVM: s390: log capability enablement and vm attribute changes
  ...
2015-08-31 08:27:44 -07:00
Xiong Zhang
11c1b657c4 drm/i915: Enable HDMI on DDI-E
DDI-E doesn't have the correspondent GMBUS pin.

We rely on VBT to tell us which one it being used instead.

The DVI/HDMI on shared port couldn't exist.

This patch isn't tested without hardware wchich has HDMI
on DDI-E.

v2: fix trailing whitespace
v3: MISSING_CASE take place of BUG()

Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31 18:27:02 +03:00
Matt Ranostay
aff268cd53 iio: light: add APDS9960 ALS + promixity driver
APDS9960 is a combination of ALS, proximity, and gesture sensors.

This patch adds support for these functions along with gain control,
integration time, and event thresholds.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 16:23:09 +01:00
Matt Ranostay
078d02cfda iio: light: DT binding docs for APDS9960 driver
Document compatible string, and required DT properties for APDS9960
chipset driver.

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 16:23:03 +01:00
Sanchayan Maity
0010d6b444 iio: adc: vf610: Add IIO buffer support for Vybrid ADC
This patch adds support for IIO buffer to the Vybrid ADC driver.
IIO triggered buffer infrastructure along with iio sysfs trigger
is used to leverage continuous sampling support provided by the
ADC block.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 16:19:30 +01:00
Imre Deak
54875571bb drm/i915: apply the PCI_D0/D3 hibernation workaround everywhere on pre GEN6
commit da2bc1b9db
Author: Imre Deak <imre.deak@intel.com>
Date:   Thu Oct 23 19:23:26 2014 +0300

    drm/i915: add poweroff_late handler

introduced a regression on old platforms during hibernation. A workaround was
added in

commit ab3be73fa7
Author: Imre Deak <imre.deak@intel.com>
Date:   Mon Mar 2 13:04:41 2015 +0200

    drm/i915: gen4: work around hang during hibernation

using an explicit blacklist for the GENs/BIOS vendors where the issue was
reported. Later there we had reports of the same failure on platforms not on
this list.

To my best knowledge the correct thing to do is still to put the device to PCI
D3 state during hibernation, see [1] and [2] for the reasons. This also aligns
with our future plans to unify more the runtime and system suspend/resume
paths. Since an exact blacklist seems to be impractical (multiple GENs and
BIOS vendors are affected) apply the workaround on everything pre GEN6.

[1] http://lists.freedesktop.org/archives/intel-gfx/2015-February/060710.html
[2] https://lkml.org/lkml/2015/6/22/274

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95061
Reported-by: Ilya Tumaykin <itumaykin@gmail.com>
Reported-by: Dirk Griesbach <spamthis@freenet.de>
Reported-by: Pavel Machek <pavel@ucw.cz>
Reported-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Tested-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
CC: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31 18:18:51 +03:00
Ville Syrjälä
d14e7b6d1d drm/i915: Check DP link status on long hpd too
We are no longer checkling the DP link status on long hpd. We used to do
that from the .hot_plug() handler, but it was removed when MST got
introduced.

If there's no userspace we now fail to retrain the link if the sink
power is toggled (or cable yanked and replugged), meaning the user is
left staring at a blank screen. With the retraining put back that should
be fixed.

Also remove the leftover comment that referred to the old retraining
from .hot_plug().

Fixes a regression introduced in:
commit 0e32b39cee
Author: Dave Airlie <airlied@redhat.com>
Date:   Fri May 2 14:02:48 2014 +1000

    drm/i915: add DP 1.2 MST support (v0.7)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89453
Tested-by: Palmer Dabbelt <palmer@dabbelt.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91407
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89461
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89594
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85641
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31 18:16:43 +03:00
Peng Fan
f6707ef7a3 staging: iio: adc: lpc32xx: use correct reutrn value
To lpc32xx_adc driver, when platform_get_resource or
platform_get_irq failed, we should use -ENXIO as a
return value, but not -EBUSY.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 16:13:16 +01:00
Axel Lin
887e83e32d ASoC: mediatek: Convert to devm_snd_soc_register_card
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Koro Chen <koro.chen@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-31 16:11:32 +01:00
kbuild test robot
a8dbc64a26 iio: light: fix platform_no_drv_owner.cocci warnings
drivers/iio/light/opt3001.c:796:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

CC: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31 16:11:08 +01:00
Maciej S. Szmigiero
6bd3c6f75e ASoC: fsl-asoc-card: put ASRC OF node in case of unknown device
In case of unknown DT compatible device the ASRC OF node
possibly acquired earlier by of_parse_phandle() has
to be put before returning from probe method.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-31 16:08:50 +01:00
Sasha Levin
f0a5157803 tracing: Don't make assumptions about length of string on task rename
While the dest comm string size is assured to be at least TASK_COMM_LEN long,
doing a memcpy() also adds the assumption that the source is at least that
long as well, which isn't assured, and isn't true in cases such as:

	set_task_comm(worker->task, "kworker/dying");

This leads to accessing invalid memory.

Link: http://lkml.kernel.org/r/1440760018-1557-1-git-send-email-sasha.levin@oracle.com

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-08-31 10:47:14 -04:00
Leilk Liu
3d4fe18200 spi: Mediatek: Document devicetree bindings update for spi bus
This patch updates spi bindings, fixs clock usage description.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-31 15:26:50 +01:00
Leilk Liu
adcbcfea15 spi: mediatek: fix spi clock usage error
spi clock manages flow:
  CLK_TOP_SYSPLL3_D2 ---> CLK_TOP_SPI_SEL ---> CLK_PERI_SPI0
     (source clock)           (clock mux)       (clock gate)
spi driver should choose source clock by clock mux, then enable
clock gate.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-31 15:26:50 +01:00