Commit graph

276,767 commits

Author SHA1 Message Date
Linus Torvalds
acceba598e Merge branch 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "Features:

   - new drivers: Renesas EMEV2, register based MUX, NXP LPC2xxx
   - core: scans DT and assigns wakeup interrupts.  no driver changes needed.
   - core: some refcouting issues fixed and better API for that
   - core: new helper function for best effort block read emulation
   - slave framework: proper DT bindings and userspace instantiation
   - some bigger work for xiic, pxa, omap drivers

  .. and quite a number of smaller driver fixes, cleanups, improvements"

* 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (65 commits)
  i2c: mux: reg Change ioread endianness for readback
  i2c: mux: reg: fix compilation warnings
  i2c: mux: reg: simplify register size checking
  i2c: muxes: fix leaked i2c adapter device node references
  i2c: allow specifying separate wakeup interrupt in device tree
  of/irq: export of_get_irq_byname()
  i2c: xgene-slimpro: dma_mapping_error() doesn't return an error code
  i2c: Replace I2C_CROS_EC_TUNNEL dependency
  eeprom: at24: use i2c_smbus_read_i2c_block_data_or_emulated
  i2c: core: Add support for best effort block read emulation
  i2c: lpc2k: add driver
  i2c: mux: Add register-based mux i2c-mux-reg
  i2c: dt: describe generic bindings
  i2c: slave: print warning if slave flag not set
  i2c: support 10 bit and slave addresses in sysfs 'new_device'
  i2c: take address space into account when checking for used addresses
  i2c: apply DT flags when probing
  i2c: make address check indpendent from client struct
  i2c: rename address check functions
  i2c: apply address offset for slaves, too
  ...
2015-09-08 16:16:26 -07:00
Linus Torvalds
c19176154b RTC for 4.3
Core:
  - use is_visible() to control sysfs attributes
  - switch wakealarm attribute to DEVICE_ATTR_RW
  - make rtc_does_wakealarm() return boolean
  - properly manage lifetime of dev and cdev in rtc device
  - remove unnecessary device_get() in rtc_device_unregister
  - fix double free in rtc_register_device() error path
 
 New drivers:
  - NXP LPC24xx
  - Xilinx Zynq MP
  - Dialog DA9062
 
 Subsystem wide cleanups:
  - fix drivers that consider 0 as a valid IRQ in client->irq
  - Drop (un)likely before IS_ERR(_OR_NULL)
  - drop the remaining owner assignment for i2c_driver and platform_driver
  - module autoload fixes
 
 Drivers:
  - 88pm80x: add device tree support
  - abx80x: fix RTC write bit
  - ab8500: Add a sentinel to ab85xx_rtc_ids[]
  - armada38x: Align RTC set time procedure with the official errata
  - as3722: correct month value
  - at91sam9: cleanups
  - at91rm9200: get and use slow clock and cleanups
  - bq32k: remove redundant check
  - cmos: century support, proper fix for the spurious wakeup
  - ds1307: cleanups and wakeup irq support
  - ds1374: Remove unused variable
  - ds1685: Use module_platform_driver
  - ds3232: fix WARNING trace in resume function
  - gemini: fix ptr_ret.cocci warnings
  - mt6397: implement suspend/resume
  - omap: support internal and external clock enabling
  - opal: Enable alarms only when opal supports tpo
  - pcf2127: use OFS flag to detect unreliable date and warn the user
  - pl031: fix typo for author email
  - rx8025: huge cleanup and fixes
  - sa1100/pxa: share common code
  - s5m: fix to update ctrl register
  - s3c: fix clocks and wakeup, cleanup
  - sirfsoc: use regmap
  - nvram_read()/nvram_write() functions for cmos, ds1305, ds1307, ds1343,
  ds1511, ds1553, ds1742, m48t59, rp5c01, stk17ta8, tx4939
  - use rtc_valid_tm() error code when reading date/time instead of 0 for
  isl12022, pcf2123, pcf2127
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJV7ARpAAoJEKbNnwlvZCyzo40P/09fca3C9HBEI5hgJO7PmQX8
 +3wkacMjEi58yMTzWoDCFh2H1Vvajm1d6bJ6H//5/3h/KPKrjIsCTFlMfuv8gfbe
 xFoeXPMdiojjPxFjbjnpM+0GD9SKTIjwpP4d8HgoUDwGRJ6dxaTOVuJXRmVGcmas
 e4Ih6hDy2YBiRXLzLHSvSNcTJDGznwMvEEg1AfqUjAtNm4BUzhUnvq0CYlSdwMzy
 xK6w0LmOr67l2QpjiQNCvIn04OWdDQ35f0GcRHYEY66cZPkvPp3OCC/UbeChU6uK
 He/v1n+QdBTbkKYeYmNnBSr42KPTLONNaOFXf79PpAz/WtiYxLxJDbf8DYW9gGQj
 mC3rMNWXf4rEFHkHYH4KvbvxplYd6/pCByMFJa76pKtcE2FG7pVAQZgLaLGemct4
 q0MW73n7yBR1wDlTHqqKu1pAnz1CW3Eui96mDJJptG3CtNqe9a8G48Yzy5OuYAcI
 wxBWCbxeT2z+EuePOBGlQvPreyqyTjHXL87NqMEDrzFrdQd02rn90xqIPlCbcr/P
 qyRwIrDGFyV8PX9I4ewrtt9WfgttayHgZ4juaSi9F479oT6006z6vArrTg2Q/saA
 b0X+hG8oLGSZuSobASjjCtjTE+jYhr+4hzGuHJw0ky0CzLQOqf1APMKDwLN4m5Pz
 Ex+JKalozL+LElGMCS3q
 =cKuu
 -----END PGP SIGNATURE-----

Merge tag 'rtc-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Core:
   - use is_visible() to control sysfs attributes
   - switch wakealarm attribute to DEVICE_ATTR_RW
   - make rtc_does_wakealarm() return boolean
   - properly manage lifetime of dev and cdev in rtc device
   - remove unnecessary device_get() in rtc_device_unregister
   - fix double free in rtc_register_device() error path

  New drivers:
   - NXP LPC24xx
   - Xilinx Zynq MP
   - Dialog DA9062

  Subsystem wide cleanups:
   - fix drivers that consider 0 as a valid IRQ in client->irq
   - Drop (un)likely before IS_ERR(_OR_NULL)
   - drop the remaining owner assignment for i2c_driver and
     platform_driver
   - module autoload fixes

  Drivers:
   - 88pm80x: add device tree support
   - abx80x: fix RTC write bit
   - ab8500: Add a sentinel to ab85xx_rtc_ids[]
   - armada38x: Align RTC set time procedure with the official errata
   - as3722: correct month value
   - at91sam9: cleanups
   - at91rm9200: get and use slow clock and cleanups
   - bq32k: remove redundant check
   - cmos: century support, proper fix for the spurious wakeup
   - ds1307: cleanups and wakeup irq support
   - ds1374: Remove unused variable
   - ds1685: Use module_platform_driver
   - ds3232: fix WARNING trace in resume function
   - gemini: fix ptr_ret.cocci warnings
   - mt6397: implement suspend/resume
   - omap: support internal and external clock enabling
   - opal: Enable alarms only when opal supports tpo
   - pcf2127: use OFS flag to detect unreliable date and warn the user
   - pl031: fix typo for author email
   - rx8025: huge cleanup and fixes
   - sa1100/pxa: share common code
   - s5m: fix to update ctrl register
   - s3c: fix clocks and wakeup, cleanup
   - sirfsoc: use regmap
   - nvram_read()/nvram_write() functions for cmos, ds1305, ds1307,
     ds1343, ds1511, ds1553, ds1742, m48t59, rp5c01, stk17ta8, tx4939
   - use rtc_valid_tm() error code when reading date/time instead of 0
     for isl12022, pcf2123, pcf2127"

* tag 'rtc-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (90 commits)
  rtc: abx80x: fix RTC write bit
  rtc: ab8500: Add a sentinel to ab85xx_rtc_ids[]
  rtc: ds1374: Remove unused variable
  rtc: Fix module autoload for OF platform drivers
  rtc: Fix module autoload for rtc-{ab8500,max8997,s5m} drivers
  rtc: omap: Add external clock enabling support
  rtc: omap: Add internal clock enabling support
  ARM: dts: AM437x: Add the internal and external clock nodes for rtc
  rtc: s5m: fix to update ctrl register
  rtc: add xilinx zynqmp rtc driver
  devicetree: bindings: rtc: add bindings for xilinx zynqmp rtc
  rtc: as3722: correct month value
  ARM: config: Switch PXA27x platforms to use PXA RTC driver
  ARM: mmp: remove unused RTC register definitions
  ARM: sa1100: remove unused RTC register definitions
  rtc: sa1100/pxa: convert to run-time register mapping
  ARM: pxa: add memory resource to SA1100 RTC device
  rtc: pxa: convert to use shared sa1100 functions
  rtc: sa1100: prepare to share sa1100_rtc_ops
  rtc: ds3232: fix WARNING trace in resume function
  ...
2015-09-08 15:46:31 -07:00
Linus Torvalds
12f03ee606 libnvdimm for 4.3:
1/ Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
    mechanism for adding device-driver-discovered memory regions to the
    kernel's direct map.  This facility is used by the pmem driver to
    enable pfn_to_page() operations on the page frames returned by DAX
    ('direct_access' in 'struct block_device_operations'). For now, the
    'memmap' allocation for these "device" pages comes from "System
    RAM".  Support for allocating the memmap from device memory will
    arrive in a later kernel.
 
 2/ Introduce memremap() to replace usages of ioremap_cache() and
    ioremap_wt().  memremap() drops the __iomem annotation for these
    mappings to memory that do not have i/o side effects.  The
    replacement of ioremap_cache() with memremap() is limited to the
    pmem driver to ease merging the api change in v4.3.  Completion of
    the conversion is targeted for v4.4.
 
 3/ Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
    driver, update the VFS DAX implementation and PMEM api to provide
    persistence guarantees for kernel operations on a DAX mapping.
 
 4/ Convert the ACPI NFIT 'BLK' driver to map the block apertures as
    cacheable to improve performance.
 
 5/ Miscellaneous updates and fixes to libnvdimm including support
    for issuing "address range scrub" commands, clarifying the optimal
    'sector size' of pmem devices, a clarification of the usage of the
    ACPI '_STA' (status) property for DIMM devices, and other minor
    fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6Nx7AAoJEB7SkWpmfYgCWyYQAI5ju6Gvw27RNFtPovHcZUf5
 JGnxXejI6/AqeTQ+IulgprxtEUCrXOHjCDA5dkjr1qvsoqK1qxug+vJHOZLgeW0R
 OwDtmdW4Qrgeqm+CPoxETkorJ8wDOc8mol81kTiMgeV3UqbYeeHIiTAmwe7VzZ0C
 nNdCRDm5g8dHCjTKcvK3rvozgyoNoWeBiHkPe76EbnxDICxCB5dak7XsVKNMIVFQ
 NuYlnw6IYN7+rMHgpgpRux38NtIW8VlYPWTmHExejc2mlioWMNBG/bmtwLyJ6M3e
 zliz4/cnonTMUaizZaVozyinTa65m7wcnpjK+vlyGV2deDZPJpDRvSOtB0lH30bR
 1gy+qrKzuGKpaN6thOISxFLLjmEeYwzYd7SvC9n118r32qShz+opN9XX0WmWSFlA
 sajE1ehm4M7s5pkMoa/dRnAyR8RUPu4RNINdQ/Z9jFfAOx+Q26rLdQXwf9+uqbEb
 bIeSQwOteK5vYYCstvpAcHSMlJAglzIX5UfZBvtEIJN7rlb0VhmGWfxAnTu+ktG1
 o9cqAt+J4146xHaFwj5duTsyKhWb8BL9+xqbKPNpXEp+PbLsrnE/+WkDLFD67jxz
 dgIoK60mGnVXp+16I2uMqYYDgAyO5zUdmM4OygOMnZNa1mxesjbDJC6Wat1Wsndn
 slsw6DkrWT60CRE42nbK
 =o57/
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "This update has successfully completed a 0day-kbuild run and has
  appeared in a linux-next release.  The changes outside of the typical
  drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the
  removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and
  the introduction of ZONE_DEVICE + devm_memremap_pages().

  Summary:

   - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
     mechanism for adding device-driver-discovered memory regions to the
     kernel's direct map.

     This facility is used by the pmem driver to enable pfn_to_page()
     operations on the page frames returned by DAX ('direct_access' in
     'struct block_device_operations').

     For now, the 'memmap' allocation for these "device" pages comes
     from "System RAM".  Support for allocating the memmap from device
     memory will arrive in a later kernel.

   - Introduce memremap() to replace usages of ioremap_cache() and
     ioremap_wt().  memremap() drops the __iomem annotation for these
     mappings to memory that do not have i/o side effects.  The
     replacement of ioremap_cache() with memremap() is limited to the
     pmem driver to ease merging the api change in v4.3.

     Completion of the conversion is targeted for v4.4.

   - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
     driver, update the VFS DAX implementation and PMEM api to provide
     persistence guarantees for kernel operations on a DAX mapping.

   - Convert the ACPI NFIT 'BLK' driver to map the block apertures as
     cacheable to improve performance.

   - Miscellaneous updates and fixes to libnvdimm including support for
     issuing "address range scrub" commands, clarifying the optimal
     'sector size' of pmem devices, a clarification of the usage of the
     ACPI '_STA' (status) property for DIMM devices, and other minor
     fixes"

* tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits)
  libnvdimm, pmem: direct map legacy pmem by default
  libnvdimm, pmem: 'struct page' for pmem
  libnvdimm, pfn: 'struct page' provider infrastructure
  x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB
  add devm_memremap_pages
  mm: ZONE_DEVICE for "device memory"
  mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h
  dax: drop size parameter to ->direct_access()
  nd_blk: change aperture mapping from WC to WB
  nvdimm: change to use generic kvfree()
  pmem, dax: have direct_access use __pmem annotation
  dax: update I/O path to do proper PMEM flushing
  pmem: add copy_from_iter_pmem() and clear_pmem()
  pmem, x86: clean up conditional pmem includes
  pmem: remove layer when calling arch_has_wmb_pmem()
  pmem, x86: move x86 PMEM API to new pmem.h header
  libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option
  pmem: switch to devm_ allocations
  devres: add devm_memremap
  libnvdimm, btt: write and validate parent_uuid
  ...
2015-09-08 14:35:59 -07:00
Linus Torvalds
752240e74d xen: features and fixes for 4.3-rc0
- Convert xen-blkfront to the multiqueue API
 - [arm] Support binding event channels to different VCPUs.
 - [x86] Support > 512 GiB in a PV guests (off by default as such a
   guest cannot be migrated with the current toolstack).
 - [x86] PMU support for PV dom0 (limited support for using perf with
   Xen and other guests).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJV7wIdAAoJEFxbo/MsZsTR0hEH/04HTKLKGnSJpZ5WbMPxqZxE
 UqGlvhvVWNAmFocZmbPcEi9T1qtcFrX5pM55JQr6UmAp3ovYsT2q1Q1kKaOaawks
 pSfc/YEH3oQW5VUQ9Lm9Ru5Z8Btox0WrzRREO92OF36UOgUOBOLkGsUfOwDinNIM
 lSk2djbYwDYAsoeC3PHB32wwMI//Lz6B/9ZVXcyL6ULynt1ULdspETjGnptRPZa7
 JTB5L4/soioKOn18HDwwOhKmvaFUPQv9Odnv7dc85XwZreajhM/KMu3qFbMDaF/d
 WVB1NMeCBdQYgjOrUjrmpyr5uTMySiQEG54cplrEKinfeZgKlEyjKvjcAfJfiac=
 =Ktjl
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.3-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from David Vrabel:
 "Xen features and fixes for 4.3:

   - Convert xen-blkfront to the multiqueue API
   - [arm] Support binding event channels to different VCPUs.
   - [x86] Support > 512 GiB in a PV guests (off by default as such a
     guest cannot be migrated with the current toolstack).
   - [x86] PMU support for PV dom0 (limited support for using perf with
     Xen and other guests)"

* tag 'for-linus-4.3-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (33 commits)
  xen: switch extra memory accounting to use pfns
  xen: limit memory to architectural maximum
  xen: avoid another early crash of memory limited dom0
  xen: avoid early crash of memory limited dom0
  arm/xen: Remove helpers which are PV specific
  xen/x86: Don't try to set PCE bit in CR4
  xen/PMU: PMU emulation code
  xen/PMU: Intercept PMU-related MSR and APIC accesses
  xen/PMU: Describe vendor-specific PMU registers
  xen/PMU: Initialization code for Xen PMU
  xen/PMU: Sysfs interface for setting Xen PMU mode
  xen: xensyms support
  xen: remove no longer needed p2m.h
  xen: allow more than 512 GB of RAM for 64 bit pv-domains
  xen: move p2m list if conflicting with e820 map
  xen: add explicit memblock_reserve() calls for special pages
  mm: provide early_memremap_ro to establish read-only mapping
  xen: check for initrd conflicting with e820 map
  xen: check pre-allocated page tables for conflict with memory map
  xen: check for kernel memory conflicting with memory layout
  ...
2015-09-08 11:46:48 -07:00
Linus Torvalds
b8cb642af9 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irq updates from Thomas Gleixner:
 "The second part of irq related updates:

   - Provide EOImode for GIC[V3] irq chips, which is a prerequisite for
     direct interrupt handling in [KVM] guests"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/GIC: Fix EOImode setting for non-DT/ACPI systems
  irqchip/GIC: Don't deactivate interrupts forwarded to a guest
  irqchip/GIC: Convert to EOImode == 1
  irqchip/GICv3: Don't deactivate interrupts forwarded to a guest
  irqchip/GICv3: Convert to EOImode == 1
2015-09-08 11:36:56 -07:00
Juergen Gross
626d750866 xen: switch extra memory accounting to use pfns
Instead of using physical addresses for accounting of extra memory
areas available for ballooning switch to pfns as this is much less
error prone regarding partial pages.

Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08 16:28:06 +01:00
Linus Torvalds
4e4adb2f46 NFS client updates for Linux 4.3
Highlights include:
 
 Stable patches:
 - Fix atomicity of pNFS commit list updates
 - Fix NFSv4 handling of open(O_CREAT|O_EXCL|O_RDONLY)
 - nfs_set_pgio_error sometimes misses errors
 - Fix a thinko in xs_connect()
 - Fix borkage in _same_data_server_addrs_locked()
 - Fix a NULL pointer dereference of migration recovery ops for v4.2 client
 - Don't let the ctime override attribute barriers.
 - Revert "NFSv4: Remove incorrect check in can_open_delegated()"
 - Ensure flexfiles pNFS driver updates the inode after write finishes
 - flexfiles must not pollute the attribute cache with attrbutes from the DS
 - Fix a protocol error in layoutreturn
 - Fix a protocol issue with NFSv4.1 CLOSE stateids
 
 Bugfixes + cleanups
 - pNFS blocks bugfixes from Christoph
 - Various cleanups from Anna
 - More fixes for delegation corner cases
 - Don't fsync twice for O_SYNC/IS_SYNC files
 - Fix pNFS and flexfiles layoutstats bugs
 - pnfs/flexfiles: avoid duplicate tracking of mirror data
 - pnfs: Fix layoutget/layoutreturn/return-on-close serialisation issues.
 - pnfs/flexfiles: error handling retries a layoutget before fallback to MDS
 
 Features:
 - Full support for the OPEN NFS4_CREATE_EXCLUSIVE4_1 mode from Kinglong
 - More RDMA client transport improvements from Chuck
 - Removal of the deprecated ib_reg_phys_mr() and ib_rereg_phys_mr() verbs
   from the SUNRPC, Lustre and core infiniband tree.
 - Optimise away the close-to-open getattr if there is no cached data
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV7chgAAoJEGcL54qWCgDyqJQP/3kto9VXnXcatC382jF9Pfj5
 F55XeSnviOXH7CyiKA4nSBhnxg/sLuWOTpbkVI/4Y+VyWhLby9h+mtcKURHOlBnj
 d5BFoPwaBVDnUiKlHFQDkRjIyxjj2Sb6/uEb2V/u3v+3znR5AZZ4lzFx4cD85oaz
 mcru7yGiSxaQCIH6lHExcCEKXaDP5YdvS9YFsyQfv2976JSaQHM9ZG04E0v6MzTo
 E5wwC4CLMKmhuX9kmQMj85jzs1ASAKZ3N7b4cApTIo6F8DCDH0vKQphq/nEQC497
 ECjEs5/fpxtNJUpSBu0gT7G4LCiW3PzE7pHa+8bhbaAn9OzxIR5+qWujKsfGYQhO
 Oomp3K9zO6omshAc5w4MkknPpbImjoZjGAj/q/6DbtrDpnD7DzOTirwYY2yX0CA8
 qcL81uJUb8+j4jJj4RTO+lTUBItrM1XTqTSd/3eSMr5DDRVZj+ERZxh17TaxRBZL
 YrbrLHxCHrcbdSbPlovyvY+BwjJUUFJRcOxGQXLmNYR9u92fF59rb53bzVyzcRRO
 wBozzrNRCFL+fPgfNPLEapIb6VtExdM3rl2HYsJGckHj4DPQdnoB3ytIT9iEFZEN
 +/rE14XEZte7kuH3OP4el2UsP/hVsm7A49mtwrkdbd7rxMWD6XfQUp8DAggWUEtI
 1H6T7RC1Y6wsu0X1fnVz
 =knJA
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable patches:
   - Fix atomicity of pNFS commit list updates
   - Fix NFSv4 handling of open(O_CREAT|O_EXCL|O_RDONLY)
   - nfs_set_pgio_error sometimes misses errors
   - Fix a thinko in xs_connect()
   - Fix borkage in _same_data_server_addrs_locked()
   - Fix a NULL pointer dereference of migration recovery ops for v4.2
     client
   - Don't let the ctime override attribute barriers.
   - Revert "NFSv4: Remove incorrect check in can_open_delegated()"
   - Ensure flexfiles pNFS driver updates the inode after write finishes
   - flexfiles must not pollute the attribute cache with attrbutes from
     the DS
   - Fix a protocol error in layoutreturn
   - Fix a protocol issue with NFSv4.1 CLOSE stateids

  Bugfixes + cleanups
   - pNFS blocks bugfixes from Christoph
   - Various cleanups from Anna
   - More fixes for delegation corner cases
   - Don't fsync twice for O_SYNC/IS_SYNC files
   - Fix pNFS and flexfiles layoutstats bugs
   - pnfs/flexfiles: avoid duplicate tracking of mirror data
   - pnfs: Fix layoutget/layoutreturn/return-on-close serialisation
     issues
   - pnfs/flexfiles: error handling retries a layoutget before fallback
     to MDS

  Features:
   - Full support for the OPEN NFS4_CREATE_EXCLUSIVE4_1 mode from
     Kinglong
   - More RDMA client transport improvements from Chuck
   - Removal of the deprecated ib_reg_phys_mr() and ib_rereg_phys_mr()
     verbs from the SUNRPC, Lustre and core infiniband tree.
   - Optimise away the close-to-open getattr if there is no cached data"

* tag 'nfs-for-4.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (108 commits)
  NFSv4: Respect the server imposed limit on how many changes we may cache
  NFSv4: Express delegation limit in units of pages
  Revert "NFS: Make close(2) asynchronous when closing NFS O_DIRECT files"
  NFS: Optimise away the close-to-open getattr if there is no cached data
  NFSv4.1/flexfiles: Clean up ff_layout_write_done_cb/ff_layout_commit_done_cb
  NFSv4.1/flexfiles: Mark the layout for return in ff_layout_io_track_ds_error()
  nfs: Remove unneeded checking of the return value from scnprintf
  nfs: Fix truncated client owner id without proto type
  NFSv4.1/flexfiles: Mark layout for return if the mirrors are invalid
  NFSv4.1/flexfiles: RW layouts are valid only if all mirrors are valid
  NFSv4.1/flexfiles: Fix incorrect usage of pnfs_generic_mark_devid_invalid()
  NFSv4.1/flexfiles: Fix freeing of mirrors
  NFSv4.1/pNFS: Don't request a minimal read layout beyond the end of file
  NFSv4.1/pnfs: Handle LAYOUTGET return values correctly
  NFSv4.1/pnfs: Don't ask for a read layout for an empty file.
  NFSv4.1: Fix a protocol issue with CLOSE stateids
  NFSv4.1/flexfiles: Don't mark the entire deviceid as bad for file errors
  SUNRPC: Prevent SYN+SYNACK+RST storms
  SUNRPC: xs_reset_transport must mark the connection as disconnected
  NFSv4.1/pnfs: Ensure layoutreturn reserves space for the opaque payload
  ...
2015-09-07 14:02:24 -07:00
Linus Torvalds
9cfcc658da media updates for v4.3-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6ifEAAoJEAhfPr2O5OEVn5kP/i2jM1tWcmV/ZEBKGAN0jpRk
 5Y/Q+rnXvOpIJSQC3dEkweoBymVMclSgSB/wFSWCZtp5MaB8KrH4/2uc3UvolF91
 7bqXt+fCUacMbDQyaabMCR83mz9tdOJLd5sf0ABqBgXGfwh5uXmBPaYBzmcYvKcW
 4D89MFUpaFDPARTs9rdpVyr0aPRU4GcN0R3snRO9Ly+cQnyV/RxPf9NqCgnI+yPq
 +NvA9ScUBcBt62piSIGR4egcAR8boxYC+0r57340S21/JVMvsHQ3ok9b1aT8/rtd
 Yl24FkcKrRV0ShN5S1RmW5DLH/HRGabuMjkiEz9xq52FGD2sQQda0At58dWivsa4
 XYdxS9UUfb9Z+qyeMdmCl1MUFRrV2G4H6VItP+GKyT3UZLEDcLl6hBg3SkyWxWB4
 CSO5WuRThiIB86OVcIaREftzqDy5HdvH3ZKRD7QrW0DItGVjQwV5j6gvwqO9OEXs
 99BnSohyKwUBonumE2ZtFGGhIwIomllrMSqg991bPH9+13bg/rPxUqntkPrVap/9
 cV3qKO8ZFrz5UInBnR1U83l60ZK7rV4G6AVMSMKpM9XVK9TDKryAUN9Mhj5XWRH8
 hbma89TQVdhdrITtt27uzj8F622cvZvxd1BqDBR8DjKVvtv/E2GPzJrAj7GHe3/o
 NgzP5fF6X2Si32GNb7J8
 =cIed
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - new DVB frontend drivers: ascot2e, cxd2841er, horus3a, lnbh25
 - new HDMI capture driver: tc358743
 - new driver for NetUP DVB new boards (netup_unidvb)
 - IR support for DVBSky cards (smipcie-ir)
 - Coda driver has gain macroblock tiling support
 - Renesas R-Car gains JPEG codec driver
 - new DVB platform driver for STi boards: c8sectpfe
 - added documentation for the media core kABI to device-drivers DocBook
 - lots of driver fixups, cleanups and improvements

* tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (297 commits)
  [media] c8sectpfe: Remove select on undefined LIBELF_32
  [media] i2c: fix platform_no_drv_owner.cocci warnings
  [media] cx231xx: Use wake_up_interruptible() instead of wake_up_interruptible_nr()
  [media] tc358743: only queue subdev notifications if devnode is set
  [media] tc358743: add missing Kconfig dependency/select
  [media] c8sectpfe: Use %pad to print 'dma_addr_t'
  [media] DocBook media: Fix typo "the the" in xml files
  [media] tc358743: make reset gpio optional
  [media] tc358743: set direction of reset gpio using devm_gpiod_get
  [media] dvbdev: document most of the functions/data structs
  [media] dvb_frontend.h: document the struct dvb_frontend
  [media] dvb-frontend.h: document struct dtv_frontend_properties
  [media] dvb-frontend.h: document struct dvb_frontend_ops
  [media] dvb: Use DVBFE_ALGO_HW where applicable
  [media] dvb_frontend.h: document struct analog_demod_ops
  [media] dvb_frontend.h: Document struct dvb_tuner_ops
  [media] Docbook: Document struct analog_parameters
  [media] dvb_frontend.h: get rid of dvbfe_modcod
  [media] add documentation for struct dvb_tuner_info
  [media] dvb_frontend: document dvb_frontend_tune_settings
  ...
2015-09-05 18:21:14 -07:00
Linus Torvalds
e3a98ac476 Merge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
 "Mainly we move from jiffy based timer to HRTIMER for finer control
  over polling.  Then a controller reduces its polling period from 10 to
  1ms"

* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: arm_mhu: reduce txpoll_period from 10ms to 1 ms
  mailbox: switch to hrtimer for tx_complete polling
  mailbox: Drop owner assignment from platform_driver
2015-09-05 18:11:04 -07:00
Linus Torvalds
2a013e37ce md updates for 4.3
- An assortment of little fixes, several for minor races only likely
   to be hit during testing
 - further cluster-md-raid1 development, not ready for real use yet.
 - new RAID6 syndrome code for ARM NEON
 - fix a race where a write can return before failure of one device
   is properly recorded in metadata, so an immediate crash might result
   in that write being lost.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6rSXAAoJEDnsnt1WYoG5eJIQAJs62+kB3+p87/VEu4hiBgYv
 yyaCBlTDn3xxy3WFLtvSIc+cZOamvGe/u/+9/aTA5zq30VpS0fwZlLUxwyR3vB7H
 aXh5y0JL8fViCUp6o+SplOpNDMAv4ntcW5NMv7uWhPLxtQxF/IJu6YLsDRcFaJqL
 LFCpvKSPgXOQ88ZXHa54xgFgEy+aAh1lxaWQmeqCLtgVc6YhwIsazG00R/vow8Pb
 91u3jFioWjBpovTJiRxQO+NGemfOnKrm2EWkR4jzo8taHOouBWOH0RZjh/67dh4p
 QX4GjMINhFvYSr1UMGXfPm+Fjp2PRgx1qKyR/XhPeXNuE2xZf7T4aCnmKA8DVUA4
 vyEl/l0lAZClExNA+bgE/wCrMpvtb9E4NnklzIffDqsDY79m9JzLwznYqDQcXP7m
 0zPlRmf8KQoSOVV960N2O6siwQMwvTyPecG0raAv9BKjwZ+7/M8HLOplZuuMsbzT
 BZ6+FnAIDtc0Id0wwJoARUkghG7Nr4IWi4Q8MtyYLgH9KLnYkomjf/I2B5sEooCF
 JFIXeg+XX/xKSFHV4TycYdAFMtMEJMJ/pEnbKJ/W7CyAmrHJv+0/U+/gOkA8Mg76
 iqYVWqRJHP9ZyWpmaWaaOeGIgFoJqrjM65qFNRcOnzMd/aAi8W63oyM99Lxi+1pm
 i8StqQBNtiwzds/w32SI
 =n+/k
 -----END PGP SIGNATURE-----

Merge tag 'md/4.3' of git://neil.brown.name/md

Pull md updates from Neil Brown:

 - an assortment of little fixes, several for minor races only likely to
   be hit during testing

 - further cluster-md-raid1 development, not ready for real use yet.

 - new RAID6 syndrome code for ARM NEON

 - fix a race where a write can return before failure of one device is
   properly recorded in metadata, so an immediate crash might result in
   that write being lost.

* tag 'md/4.3' of git://neil.brown.name/md: (33 commits)
  md/raid5: ensure device failure recorded before write request returns.
  md/raid5: use bio_list for the list of bios to return.
  md/raid10: ensure device failure recorded before write request returns.
  md/raid1: ensure device failure recorded before write request returns.
  md-cluster: remove inappropriate try_module_get from join()
  md: extend spinlock protection in register_md_cluster_operations
  md-cluster: Read the disk bitmap sb and check if it needs recovery
  md-cluster: only call complete(&cinfo->completion) when node join cluster
  md-cluster: add missed lockres_free
  md-cluster: remove the unused sb_lock
  md-cluster: init suspend_list and suspend_lock early in join
  md-cluster: add the error check if failed to get dlm lock
  md-cluster: init completion within lockres_init
  md-cluster: fix deadlock issue on message lock
  md-cluster: transfer the resync ownership to another node
  md-cluster: split recover_slot for future code reuse
  md-cluster: use %pU to print UUIDs
  md: setup safemode_timer before it's being used
  md/raid5: handle possible race as reshape completes.
  md: sync sync_completed has correct value as recovery finishes.
  ...
2015-09-05 17:52:22 -07:00
Linus Torvalds
6c0f568e84 Merge branch 'akpm' (patches from Andrew)
Merge patch-bomb from Andrew Morton:

 - a few misc things

 - Andy's "ambient capabilities"

 - fs/nofity updates

 - the ocfs2 queue

 - kernel/watchdog.c updates and feature work.

 - some of MM.  Includes Andrea's userfaultfd feature.

[ Hadn't noticed that userfaultfd was 'default y' when applying the
  patches, so that got fixed in this merge instead.  We do _not_ mark
  new features that nobody uses yet 'default y'   - Linus ]

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  mm/hugetlb.c: make vma_has_reserves() return bool
  mm/madvise.c: make madvise_behaviour_valid() return bool
  mm/memory.c: make tlb_next_batch() return bool
  mm/dmapool.c: change is_page_busy() return from int to bool
  mm: remove struct node_active_region
  mremap: simplify the "overlap" check in mremap_to()
  mremap: don't do uneccesary checks if new_len == old_len
  mremap: don't do mm_populate(new_addr) on failure
  mm: move ->mremap() from file_operations to vm_operations_struct
  mremap: don't leak new_vma if f_op->mremap() fails
  mm/hugetlb.c: make vma_shareable() return bool
  mm: make GUP handle pfn mapping unless FOLL_GET is requested
  mm: fix status code which move_pages() returns for zero page
  mm: memcontrol: bring back the VM_BUG_ON() in mem_cgroup_swapout()
  genalloc: add support of multiple gen_pools per device
  genalloc: add name arg to gen_pool_get() and devm_gen_pool_create()
  mm/memblock: WARN_ON when nid differs from overlap region
  Documentation/features/vm: add feature description and arch support status for batched TLB flush after unmap
  mm: defer flush of writable TLB entries
  mm: send one IPI per CPU to TLB flush all entries after unmapping pages
  ...
2015-09-05 14:27:38 -07:00
Mitja Spes
5f1b2f7764 rtc: abx80x: fix RTC write bit
Fix RTC write bit as per application manual

Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Mitja Spes <mitja@lxnav.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:31 +02:00
Fabio Estevam
8a67e93153 rtc: ab8500: Add a sentinel to ab85xx_rtc_ids[]
Add a sentinel to ab85xx_rtc_ids[] in order to fix the following error:

drivers/rtc/rtc-ab8500: struct platform_device_id is 24 bytes.  The last of 2 is:
0x61 0x62 0x38 0x35 0x34 0x30 0x2d 0x72 0x74 0x63 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x8c
FATAL: drivers/rtc/rtc-ab8500: struct platform_device_id is not terminated with a NULL entry!

Reported-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reported-by: Olof's autobuilder <build@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:31 +02:00
Fabio Estevam
d78908d971 rtc: ds1374: Remove unused variable
Remove unused variable 'res' and fix the following build warning:

drivers/rtc/rtc-ds1374.c:667:6: warning: unused variable 'res' [-Wunused-variable]

Reported-by: Olof's autobuilder <build@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:22 +02:00
Javier Martinez Canillas
73798d5c41 rtc: Fix module autoload for OF platform drivers
These platform drivers have a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:22 +02:00
Javier Martinez Canillas
63074cc3d4 rtc: Fix module autoload for rtc-{ab8500,max8997,s5m} drivers
These platform drivers have a platform device ID table but the module
alias information is not created so module autoloading will not work.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:21 +02:00
Keerthy
399cf0f63f rtc: omap: Add external clock enabling support
Configure the clock source to external clock if available.
External clock is preferred as it can be ticking during suspend.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:21 +02:00
Keerthy
532409aa1b rtc: omap: Add internal clock enabling support
The rtc can be clocked by an internal 32K clock. Adding the support
to enable the same.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:20 +02:00
Joonyoung Shim
ff02c0444b rtc: s5m: fix to update ctrl register
According to datasheet, the S2MPS13X and S2MPS14X should update write
buffer via setting WUDR bit to high after ctrl register is written.

If not, ALARM interrupt of rtc-s5m doesn't happen first time when i use
tools/testing/selftests/timers/rtctest.c test program and hour format is
used to 12 hour mode in Odroid-XU3 board.

One more issue is the RTC doesn't keep time on Odroid-XU3 board when i
turn on board after power off even if RTC battery is connected. It can
be solved as setting WUDR & RUDR bits to high at the same time after
RTC_CTRL register is written. It's same with condition of only writing
ALARM registers, so this is for only S2MPS14 and we should set WUDR &
A_UDR bits to high on S2MPS13.

I can't find any reasonable description about this like fix from
datasheet, but can find similar codes from rtc driver source of
hardkernel kernel and vendor kernel.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: <stable@vger.kernel.org> # v3.16
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:19 +02:00
Suneel Garapati
11143c19eb rtc: add xilinx zynqmp rtc driver
Add support for RTC controller found on Xilinx Zynq Ultrascale+ MPSoC
platform.

Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:19 +02:00
Bibek Basu
a038c3aa9f rtc: as3722: correct month value
The RTC month value is 1-indexed, but the kernel assumes it is 0-indexed.
This may result in the RTC not rolling over correctly.

Signed-off-by: Bibek Basu <bbasu@nvidia.com>
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:18 +02:00
Rob Herring
90d0ae8e95 rtc: sa1100/pxa: convert to run-time register mapping
SA1100 and PXA differ only in register offsets which are currently
hardcoded in a machine specific header. Some arm64 platforms (PXA1928)
have this RTC block as well (and not the PXA270 variant).

Convert the driver to use ioremap and set the register offsets dynamically.
Since we are touching all the register accesses, convert them all to
readl_relaxed/writel_relaxed.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: rtc-linux@googlegroups.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:16 +02:00
Rob Herring
3cdf4ad963 rtc: pxa: convert to use shared sa1100 functions
Currently, the rtc-sa1100 and rtc-pxa drivers co-exist as rtc-pxa has a
superset of functionality. Having 2 drivers sharing the same memory
resource is not allowed by the driver model if resources are properly
declared. This problem was avoided by not adding memory resources to the
SA1100 RTC driver, but that prevents clean-up of the SA1100 driver.

This commit converts the PXA RTC to use the exported SA1100 RTC
functions. Now the sa1100-rtc and pxa-rtc devices are mutually
exclusive, so we must remove the sa1100-rtc from pxa27x and pxa3xx.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: rtc-linux@googlegroups.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:15 +02:00
Rob Herring
8c0961ba7c rtc: sa1100: prepare to share sa1100_rtc_ops
Factor out the RTC initialization from the platform device specific
parts in order to share the RTC device ops with other drivers.
Specifically, it will be shared with rtc-pxa driver.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: rtc-linux@googlegroups.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:15 +02:00
Wang Dongsheng
dc2280ebf4 rtc: ds3232: fix WARNING trace in resume function
If ds3232 work on some platform that is not implementing
irq_set_wake, ds3232 will get a WARNING trace in resume.
So fix ds3232->suspended state to false when irq_set_irq_wake
return error.

WARNING: CPU: 0 PID: 729 at kernel/irq/manage.c:604 irq_set_irq_wake+0x4b/0x8c()
Unbalanced IRQ 201 wake disable
Modules linked in:
CPU: 0 PID: 729 Comm: sh Not tainted 3.12.19-rt30+ #25
[<800107d9>] (unwind_backtrace+0x1/0x88) from [<8000e4ef>] (show_stack+0xb/0xc)
[<8000e4ef>] (show_stack+0xb/0xc) from [<802b5fa9>] (dump_stack+0x4d/0x60)
[<802b5fa9>] (dump_stack+0x4d/0x60) from [<800186dd>] (warn_slowpath_common+0x45/0x64)
[<800186dd>] (warn_slowpath_common+0x45/0x64) from [<80018717>] (warn_slowpath_fmt+0x1b/0x24)
[<80018717>] (warn_slowpath_fmt+0x1b/0x24) from [<8003a8d3>] (irq_set_irq_wake+0x4b/0x8c)
[<8003a8d3>] (irq_set_irq_wake+0x4b/0x8c) from [<80204fcb>] (ds3232_resume+0x2d/0x36)
[<80204fcb>] (ds3232_resume+0x2d/0x36) from [<801954c7>] (dpm_run_callback.isra.13+0xb/0x28)
[<801954c7>] (dpm_run_callback.isra.13+0xb/0x28) from [<80195b1b>] (device_resume+0x7b/0xa2)
[<80195b1b>] (device_resume+0x7b/0xa2) from [<80195f0f>] (dpm_resume+0xbb/0x19c)
[<80195f0f>] (dpm_resume+0xbb/0x19c) from [<801960d9>] (dpm_resume_end+0x9/0x12)
[<801960d9>] (dpm_resume_end+0x9/0x12) from [<80037e1d>] (suspend_devices_and_enter+0x17d/0x1d0)
[<80037e1d>] (suspend_devices_and_enter+0x17d/0x1d0) from [<80037ee1>] (pm_suspend+0x71/0x128)
[<80037ee1>] (pm_suspend+0x71/0x128) from [<80037449>] (state_store+0x6d/0x80)
[<80037449>] (state_store+0x6d/0x80) from [<800af4d5>] (sysfs_write_file+0x9f/0xde)
[<800af4d5>] (sysfs_write_file+0x9f/0xde) from [<8007a437>] (vfs_write+0x7b/0x104)
[<8007a437>] (vfs_write+0x7b/0x104) from [<8007a7f7>] (SyS_write+0x27/0x48)
[<8007a7f7>] (SyS_write+0x27/0x48) from [<8000c121>] (ret_fast_syscall+0x1/0x44)

Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:36:21 +02:00
Joonyoung Shim
27b15e31db rtc: s3c: remove unnecessary NULL assignment
It's unnecessary the code that assigns info->rtc_clk to NULL in
s3c_rtc_remove.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:13 +02:00
Joonyoung Shim
7f23a93661 rtc: s3c: add missing clk control
It's missed to call clk_unprepare() about info->rtc_src_clk in
s3c_rtc_remove and to call clk_disable_unprepare about info->rtc_clk in
error routine of s3c_rtc_probe.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:13 +02:00
Joonyoung Shim
1fb1c35f56 rtc: s3c: fix disabled clocks for alarm
The clock enable/disable codes for alarm have been removed from
commit 24e1455493 ("drivers/rtc/rtc-s3c.c: delete duplicate clock
control") and the clocks are disabled even if alarm is set, so alarm
interrupt can't happen.

The s3c_rtc_setaie function can be called several times with 'enabled'
argument having same value, so it needs to check whether clocks are
enabled or not.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: <stable@vger.kernel.org> # v4.1
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:13 +02:00
Alexandre Belloni
80e274e96e rtc: at91sam9: remove useless include
Definitions from linux/platform_data/atmel.h are not used, remove the
include.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:13 +02:00
Alexandre Belloni
1955f213a6 rtc: at91sam9: include linux/of.h
This driver is using device tree but is not including of.h

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:12 +02:00
Nadav Haklai
0c6e718389 rtc: armada38x: Align RTC set time procedure with the official errata
According to the Armada38x functional errata FE-3124064, writing to
the RTC TIME register may fail. As a workaround, after writing to RTC
TIME register, issue a dummy write of 0x0 twice to the RTC Status
register.  This is the updated implementation of the Errata that
eliminates the need of the long 100ms delay during the RTC set time
procedure.

[gregory.clement@free-electrons.com]: removed the mutex and use the
spinlock again

Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Neta Zur Hershkovits <neta@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:12 +02:00
Alexandre Belloni
efbbb4fd6b rtc: rx8025: check time validity when necessary
Check time validity when reading time as this is when we need to know.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:12 +02:00
Alexandre Belloni
5c66e1e0b7 rtc: rx8025: fix RX8025_BIT_CTRL2_CTFG initialization
RX8025_BIT_CTRL2_CTFG was set to 0 only when it was already 0.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:12 +02:00
Alexandre Belloni
4b33d36b67 rtc: rx8025: remove useless initialization
irq_freq is already initialized to 1 in rtc_device_register()

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:12 +02:00
Alexandre Belloni
8c4a4467cd rtc: rx8025: reset validity when setting time
Wait for the user to set the time to reset the validity bits. Until then,
the time may be invalid.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:12 +02:00
Alexandre Belloni
a27c7bf657 rtc: rx8025: fix rx8025_init_client()
rx8025_init_client is modifying ctrl[0] and writing it to RX8025_REG_CTRL2
but ctrl[0] is actually RX8025_REG_CTRL1.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:12 +02:00
Alexandre Belloni
8a06513df5 rtc: rx8025: continue without alarm when irq request fails
Instead of bailing out, disable alarms and continue when
devm_request_threaded_irq() fails. This allows to still provide some
functionality.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:12 +02:00
Alexandre Belloni
fd9061fb49 rtc: rx8025: cleanup accessors
Remove useless error messages, at that point, the user already knows
something went wrong but will not be able to do anything about it anyway.
It is also highly unlikely that some registers are readable/writable
but not some other ones.

Also, transform rx8025_read_reg to be more resemblant to
i2c_smbus_read_byte_data()

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:12 +02:00
Alexandre Belloni
6f0a8cfebb rtc: rx8025: don't reset the time
Stop setting the time to epoch when it is invalid. The proper way to handle
that is to return an error when it is invalid instead of returning an
incorrect value.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:11 +02:00
Alexandre Belloni
2e10e74df7 rtc: rx8025: fix transfer mode
The datasheet specifies that transfer mode must be 0 for write and either
0x4 (simplified read) or 0 (standard read). 0x8 is not specified, use
standard mode.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:11 +02:00
Alexandre Belloni
32672c5595 rtc: rx8025: only handle dates between 2000 and 2099
The hardware is only capable of handling dates between 2000 and 2099,
enforce that.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:11 +02:00
Alexandre Belloni
2ddd18693c rtc: rx8025: use BIT()
Use BIT() instead of hand coding.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:11 +02:00
Alexandre Belloni
dbcce7cf1e rtc: rx8025: remove useless probe error message
It is useless to print a message when probe fails as the user is already
aware that it failed.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:11 +02:00
Alexandre Belloni
f0b63a1d5a rtc: rx8025: switch to managed irq allocation
Use devm_request_threaded_irq() so it is not necessary to call free_irq()
explicitly.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:11 +02:00
Alexandre Belloni
b6a57c955c rtc: rx8025: Convert to threaded IRQ
The driver currently emulates the concept of threaded IRQ using a
workqueue, switch to threaded IRQ instead.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:11 +02:00
Alexandre Belloni
15d3bdc23e rtc: rx8025: remove useless headers and reorder them
Remove the useless includes and order the remaining ones alphabetically.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:11 +02:00
Vladimir Zapolskiy
824625d392 rtc: tx4939: clean up tx4939_rtc_nvram_read()/tx4939_rtc_nvram_write()
The change removes redundant sysfs binary file boundary checks, since
this task is already done on caller side in fs/sysfs/file.c

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:10 +02:00
Vladimir Zapolskiy
ecc663c3d0 rtc: stk17ta8: clean up stk17ta8_nvram_read()/stk17ta8_nvram_write()
The change removes redundant sysfs binary file boundary checks, since
this task is already done on caller side in fs/sysfs/file.c

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:10 +02:00
Vladimir Zapolskiy
d1cf4bdee8 rtc: rp5c01: clean up rp5c01_nvram_read()/rp5c01_nvram_write()
The change removes redundant sysfs binary file boundary checks, since
this task is already done on caller side in fs/sysfs/file.c

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:10 +02:00
Vladimir Zapolskiy
99be3e371b rtc: m48t59: clean up m48t59_nvram_read()/m48t59_nvram_write()
The change removes redundant sysfs binary file boundary checks, since
this task is already done on caller side in fs/sysfs/file.c

Spinlock acquisition/release is moved out of the loop body to get
atomic states of NVRAM reading and writing operations.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:10 +02:00