Commit graph

242,824 commits

Author SHA1 Message Date
Benjamin Romer
82dd8152ef staging: unisys: Clean up CamelCase in send_int_if_needed()
Clean up CamelCase names:
issueInterruptIfEmpty => issue_irq_if_empty
interruptHandle => irq_handle

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:42:30 -07:00
Benjamin Romer
833c7255ce staging: unisys: fix CamelCase names in struct uisqueue_info
Clean up CamelCase names:
Reserved1 => reserved1
Reserved2 => reserved2

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:42:30 -07:00
Benjamin Romer
17f5e49167 staging: unisys: fix camelcase function uisqueue_InterlockedOr()
Clean up CamelCase names:
uisqueue_InterlockedOr => uisqueue_interlocked_or
Target => tgt
Set => set

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:42:30 -07:00
Benjamin Romer
e3f3b1f2a0 staging: unisys: remove timskmodutils.h
Remove the entire timskmodutils.h file as it had a lot of checkpatch.pl
strict warnings and checks, and nearly all of the functions were not used
anywhere.

The unisys_spar_platform variable was moved to timskmod.h. References to the
removed timskmodutils.h were switched to timskmod.h instead. The unused
visor_seq_file_new_buffer() and visor_seq_file_done_buffer() functions defined
in timskmodutils.h were implemented in visorkmodutils.c, so these were removed
as well.

This patch will generate a warning about updating MAINTAINERS, but there does
not seem to be any need for that.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:42:30 -07:00
Benjamin Romer
69ee73aab0 staging: unisys: fix spacing in timskmod.h macro
Adds in some missing spaces in the max macro in timskmod.h.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:42:30 -07:00
Benjamin Romer
132b8f9a35 staging: unisys: remove stray blank line in timskmod.h
Just cleaning up the extra blank line from here.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:42:30 -07:00
Benjamin Romer
fdee662e61 staging: unisys: remove unused locking functions in timskmod.h
Delete a block of unused locking functions from timskmod.h. These
functions generated a lot of checkpatch warnings and were not being used
anyhow.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:42:30 -07:00
Benjamin Romer
2c5653b7de staging: unisys: remove typedef for PERIODIC_WORK
In periodic_work.h, remove the typedef PERIODIC_WORK and replace it with
struct periodic_work, and update functions used to manipulate the
structure to use the new name. The functions used to manipulate the
PERIODIC_WORK type are updated to use the fixed name, corrected for
clarity, and changed to not use periodic_work as the parameter's name.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:42:30 -07:00
Benjamin Romer
239436eb0f staging: unisys: delete extra blank lines in periodic_work.h
Remove the extra blank lines from before the first comment.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:42:30 -07:00
Chen Gang
f39100e121 drivers/staging/unisys: Let all IOMEM related modules depend on HAS_IOMEM
UNISYS_UISLIB, UNISYS_VISORCHIPSET, and UNISYS_VISORUTIL need HAS_IOMEM,
so depend on it. One of related error (with allmodconfig under um):

    CC [M]  drivers/staging/unisys/uislib/uislib.o
  In file included from drivers/staging/unisys/uislib/uislib.c:34:0:
  drivers/staging/unisys/include/uisutils.h: In function ‘dbg_ioremap_cache’:
  drivers/staging/unisys/include/uisutils.h:88:2: error: implicit declaration of function ‘ioremap_cache’ [-Werror=implicit-function-declaration]
    new = ioremap_cache(addr, size);
    ^
  drivers/staging/unisys/include/uisutils.h:88:6: warning: assignment makes pointer from integer without a cast [enabled by default]
    new = ioremap_cache(addr, size);
        ^
  drivers/staging/unisys/include/uisutils.h: In function ‘dbg_ioremap’:
  drivers/staging/unisys/include/uisutils.h:99:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration]
    new = ioremap(addr, size);
    ^
  drivers/staging/unisys/include/uisutils.h:99:6: warning: assignment makes pointer from integer without a cast [enabled by default]
    new = ioremap(addr, size);
        ^
  drivers/staging/unisys/include/uisutils.h: In function ‘dbg_iounmap’:
  drivers/staging/unisys/include/uisutils.h:108:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
    iounmap(addr);
    ^

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:39:33 -07:00
Melike Yurtoglu
aff6de0519 staging: unisys: common-spar: Fix missing blank line warning
Fixes "Missing a blank line after declarations" checkpatch.pl warning

Signed-off-by: Melike Yurtoglu <aysemelikeyurtoglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:39:33 -07:00
Mahati Chamarthy
1cd36ed5b4 Staging: unisys: Add missing blank line
This fixes the following checkpatch.pl warning:
WARNING: Missing a blank line after declarations

Signed-off-by: Mahati Chamarthy <mahati.chamarthy@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:39:33 -07:00
Ebru Akagunduz
446393e960 staging: dgnc: Fix do not add new typedefs
This patch fixes "do not add new typedefs"
checkpatch.pl warning in dgnc_types.h

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:37:44 -07:00
Yeliz Taneroglu
3fad9641ab staging: dgnc: Fix no spaces at the start of a line in dpacompat.h
The following patch the checkpatch.pl warning:

drivers/staging/dgnc/dpacompat.h:27 warning: please, no spaces at the start of a line

Signed-off-by: Yeliz Taneroglu <yeliztaneroglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:37:44 -07:00
Mahati Chamarthy
0eaa02e66d Staging: dgnc: Add missing blank line
This fixes the following checkpatch.pl warning:
WARNING: Missing a blank line after declarations

Signed-off-by: Mahati Chamarthy <mahati.chamarthy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:37:44 -07:00
Mahati Chamarthy
3c4019d3e0 Staging: dgnc: Remove unnecessary braces
This fixes the following checkpatch.pl warnings:
WARNING: braces {} are not necessary for single statement blocks

Signed-off-by: Mahati Chamarthy <mahati.chamarthy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:37:44 -07:00
Mahati Chamarthy
c313fe2c34 Staging: dgnc: Remove return in void function
This fixes the following checkpatch.pl warnings:
WARNING: void function return statements are not generally useful

Signed-off-by: Mahati Chamarthy <mahati.chamarthy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:37:44 -07:00
Arnd Bergmann
372d5b5607 staging/lustre/lvfs: fix building without CONFIG_PROC_FS
Patch "staging/lustre/lvfs: remove the lvfs layer" moved some code around
that was previously only built when CONFIG_PROC_FS was set, which now
causes an invalid access to the obd_memory variable:

ERROR: "obd_memory" [drivers/staging/lustre/lustre/obdclass/obdclass.ko] undefined!

This fixes it by using adding a compile-time check around the access.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: fdedd94509 ("staging/lustre/lvfs: remove the lvfs layer")
Cc: James Simmons <uja.ornl@gmail.com>
Cc: Mikhail Pershin <mike.pershin@intel.com>
Cc: John L. Hammond <john.hammond@intel.com>
Cc: Jian Yu <jian.yu@intel.com>
Cc: Bob Glossman <bob.glossman@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:33:46 -07:00
Heena Sirwani
e31981a13d Staging: bcm: Removed unnecessary else.
The following patch fixes the checkpatch.pl warning:
WARNING: else is not generally useful after a break or return.

Signed-off-by: Heena Sirwani <heenasirwani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:33:46 -07:00
Mahati Chamarthy
50b47bbd43 Staging: media: omap24xx: Merge two lines and remove unused variable
This patch merges two lines and removes a variable that becomes unused
after merging.

Signed-off-by: Mahati Chamarthy <mahati.chamarthy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:33:46 -07:00
Greg Kroah-Hartman
89f904388d Revert "staging: media: cxd2099: use usleep_range()"
This reverts commit 7b86477c0e.

It was broken and broke the build :(

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-02 09:27:37 -07:00
Andy Shevchenko
f7477c2be8 spi: dw-mid: follow new DMAengine workflow
Though intel-mid-dma does not follow a new DMA workflow (*) let's prepare SPI
DW driver for that.

(*) The client is obliged to call dma_async_issue_pending() which starts the
actual transfers. Old DMA drivers do not follow this, since requirement was
introduced in the discussion of [1].

[1] http://www.spinics.net/lists/arm-kernel/msg125987.html

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-02 17:06:26 +01:00
Andy Shevchenko
2a28529944 spi: dw-mid: convert to use DMAengine wrappers
Instead of direct dereference to dmaengine callbacks we are going to use
DMAengine wrappers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-02 17:06:26 +01:00
Andy Shevchenko
15ee3be78b spi: dw-mid: change magic numbers to the constants
Instead of using magic numbers in the code we create a bit map definition of
the DMACR register and use it.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-02 17:06:26 +01:00
Marti Raudsepp
3587e625fe PCI: Add ACS quirk for AMD A88X southbridge devices
AMD has confirmed that peer-to-peer between two southbridge functions does
not occur.

Add a quirk to indicate that these functions are isolated even though they
don't have an ACS capability.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=81841
Signed-off-by: Marti Raudsepp <marti@juffo.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joel Schopp <joel.schopp@amd.com>
2014-10-02 08:50:31 -06:00
Pawel Moll
514b82a52b char: tile-srom: Add real platform bus parent
Add a real platform bus device as a parent for
the srom class devices, to prevent non-platform
devices hanging from the bus root.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02 10:19:34 -04:00
Thierry Reding
a092e19b68 gpio: pch: Build context save/restore only for PM
The pch_gpio_save_reg_conf() and pch_gpio_restore_reg_conf() functions
are only used in pch_gpio_suspend() and pch_gpio_resume(), respectively.
Since the latter are only built if PM is enabled, make the former build
under the same conditions.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-02 16:07:00 +02:00
Linus Walleij
3a4b094d5d pinctrl: abx500: get rid of unused variable
commit 2fcea6cecb
"pinctrl: remove remaining users of gpiochip_remove() retval"
removed the use of the return value from gpiochip_remove()
but missed to delete the dangling "err" variable:

drivers/pinctrl/nomadik/pinctrl-abx500.c:
In function 'abx500_gpio_probe':
drivers/pinctrl/nomadik/pinctrl-abx500.c:1208:11:
warning: unused variable 'err' [-Wunused-variable]

Fix this by getting rid of the dangling variable.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-02 16:07:00 +02:00
Varka Bhadram
36905a33dd gpio: ks8695: fix 'else should follow close brace '}''
Signed-off-by: Varka Bhadram <varkab@cdac.in>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-02 16:07:00 +02:00
Linus Walleij
27ec8a9cb5 gpio: stmpe: add verbose debug code
To troubleshoot the STMPE GPIO driver, some more detailed
debug information giving the exact info on how each pin is
used will be helpful.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-02 16:06:59 +02:00
Jason Cooper
fae119b6d4 Merge branch 'irqchip/gic' into irqchip/core 2014-10-02 13:04:58 +00:00
Jason Cooper
f7472655fb Merge branch 'irqchip/broadcom' into irqchip/core
Conflicts:
	drivers/irqchip/Makefile
2014-10-02 13:04:45 +00:00
Jason Cooper
a778bf35bd Merge branch 'irqchip/atmel' into irqchip/core 2014-10-02 13:03:48 +00:00
Masahiro Yamada
895ed4e895 kbuild: remove unnecessary "obj- := dummy.o" trick
In these Makefiles, at least one of "obj-y" and "obj-" is non-empty,
hence built-in.o is always created without such a trick.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Peter Foley <pefoley2@pefoley.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au> [shmobile]
Acked-by: David S. Miller <davem@davemloft.net> [networking]
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-10-02 13:55:02 +02:00
Joerg Roedel
09b5269a1b Merge branches 'arm/exynos', 'arm/omap', 'arm/smmu', 'x86/vt-d', 'x86/amd' and 'core' into next
Conflicts:
	drivers/iommu/arm-smmu.c
2014-10-02 12:24:45 +02:00
Todd Fujinaka
b5d130c4d6 igb: bump version to 5.2.15
Bump version

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-02 03:14:34 -07:00
Joerg Roedel
80f7b3d1b1 iommu/vt-d: Work around broken RMRR firmware entries
The VT-d specification states that an RMRR entry in the DMAR
table needs to specify the full path to the device. This is
also how newer Linux kernels implement it.

Unfortunatly older drivers just match for the target device
and not the full path to the device, so that BIOS vendors
implement that behavior into their BIOSes to make them work
with older Linux kernels. But those RMRR entries break on
newer Linux kernels.

Work around this issue by adding a fall-back into the RMRR
matching code to match those old RMRR entries too.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-10-02 12:12:35 +02:00
Joerg Roedel
57384592c4 iommu/vt-d: Store bus information in RMRR PCI device path
This will be used later to match broken RMRR entries.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-10-02 12:12:25 +02:00
Linus Walleij
89168b4899 mmc: core: restore detect line inversion semantics
commit 98e90de99a
"mmc: host: switch OF parser to use gpio descriptors"
switched the semantic behaviour of card detect and read
only flags such that the inversion capability flag would
only be set if inversion was explicitly specified in the
device tree, in the hopes that no-one was using double
inversion.

It turns out that the XOR:ing between the explicit
inversion was indeed in use, so we need to restore the
old semantics where both ways of inversion are checked
and the end result XOR:ed.

Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Tested-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-10-02 11:51:26 +02:00
Rick Jones
a81fb04941 i40e/igb: Convert to dev_consume_skb_any()
Convert two more Intel NIC drivers to dev_consume_skb_any() to help
make dropped packet profiling sane.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-02 02:36:59 -07:00
Bernhard Kaindl
7acf631889 igb: remove blocking phy read from inside spinlock
Remove a source of latency spikes (in my case up to 10ms) by not calling
code that uses mdelay() for feeding a phy statistic (rx errors for idle
symbols - not data -> idle_errors) while being called with a spinlock held.

As idle_errors isn't read, this patch only removes unused code and data.

Later, more complicated changes may be applied to address the spinlock and
allow for some PHY diagnostics by harvesting this PHY stats register fully.

This patch is designed to fix the issue and be safe for longterm/stable.

For the Intel e1000e driver, the same change was applied in 2008 with
commit 23033fad5b ("e1000e: remove phy read from inside spinlock").

The mdelay is triggered by HW/SW semaphores, thus it depends on the HW.

I've HW that triggers it even when idle. Others may trigger it only e.g.
when Ethernet ports aquire or loose the link or on ifconfig up / down.
We've noticed this first from delays in frame rx/tx due to the mdelay().

Example command for checking if the issue is triggered: cyclictest -Smp1
(Look for occasional "Max:" values > 4000 or use -b 4000 to stop if greater)

It was observed with I350 ports connected to other I350 ports, but not
if driver and EEPROM was modified to run the I350 in EEPROM-less mode.

phy_stats.idle_errors and .receive_errors (isn't touched) occupy 64 not
used bits in the adapter struct: Their allocation may be removed as well.

Cc: Carolyn Wyborny <carolyn.wyborny@intel.com>
Cc: Todd Fujinaka <todd.fujinaka@intel.com>
Fixes: 12dcd86b75 ("igb: fix stats handling") (this added the spin_lock)
Signed-off-by: Bernhard Kaindl <bk-linux@use.startmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-02 02:30:39 -07:00
Ethan Zhao
3463de103a ixgbe: delete one duplicate marcro definition of IXGBE_MAX_L2A_QUEUES
There is typo in ixgbe.h, two marcro definition of IXGBE_MAX_L2A_QUEUES to 4,
delete one, clear the compiler warning.

Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-02 02:24:08 -07:00
Joerg Roedel
1196c2fb04 iommu/vt-d: Only remove domain when device is removed
This makes sure any RMRR mappings stay in place when the
driver is unbound from the device.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jerry Hoemann <jerry.hoemann@hp.com>
2014-10-02 11:18:58 +02:00
Emil Tantilov
ffefa9f64c ixgbe: fix setting of TXDCTL.WTRHESH when ITR is set to 0 and no BQL
This patch consolidates the logic behind dynamically setting TXDCTL.WTHRESH
depending on interrupt throttle rate (ITR) setting regardless of BQL.

Previously TXDCTL.WTHRESH was dynamically being set only with BQL being
enabled, but we have to set it regardless of BQL when ITR is low to avoid
Tx stalls/hangs.

CC: John Greene <jogreene@redhat.com>
Reported by: Masayuki Gouji <gouji.masayuki@jp.fujitsu.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-02 02:17:42 -07:00
Joerg Roedel
599bad38cf driver core: Add BUS_NOTIFY_REMOVED_DEVICE event
This event closes an important gap in the bus notifiers.
There is already the BUS_NOTIFY_DEL_DEVICE event, but that
is sent when the device is still bound to its device driver.

This is too early for the IOMMU code to destroy any mappings
for the device, as they might still be in use by the driver.

The new BUS_NOTIFY_REMOVED_DEVICE event introduced with this
patch closes this gap as it is sent when the device is
already unbound from its device driver and almost completly
removed from the driver core.

With this event the IOMMU code can safely destroy any
mappings and other data structures when a device is removed.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Jerry Hoemann <jerry.hoemann@hp.com>
2014-10-02 11:14:34 +02:00
Emil Tantilov
340c5203bc ixgbe: remove wait loop on autoneg for copper devices
This patch removes couple of wait loops on autoneg that are not needed.

During validation we noticed that the loops always time out, so there
should be no user impact.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-02 02:11:13 -07:00
Rick Jones
fe1f2a972c ixgbe: Convert the normal transmit complete path to dev_consume_skb_any()
Convert the normal packet completion path to dev_consume_skb_any() so
packet drop profiling via dropwatch or perf top -G -e skb_kfree_skb
is not cluttered with false hits.

Compile tested only.  There is a dev_kfree_skb_any() in the routine
ixgbe_ptp_tx_hwtstamp() in ixgbe_ptp.c that looks like a conversion
candidate but I wasn't familiar enough with the code to pull the
trigger.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-02 02:04:46 -07:00
Anton Blanchard
3e47d1474c powerpc: Remove powerpc specific cmd_line
There is no need for yet another copy of the command line, just
use boot_command_line like everyone else.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-02 17:33:55 +10:00
Linus Walleij
1fe3bd9e34 gpio: stmpe: fix up interrupt enable logic
The STMPE driver assumes that the passed in IRQ type is
for rising or falling IRQs, not both, even though the
hardware actually supports this perfectly well. Likewise
the check for level IRQs is done against just high or low
level types, not for the case where it is combined with
other IRQs.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-02 09:19:22 +02:00
Alexander Duyck
c9d4994084 fm10k: Correctly set the number of Tx queues
The number of Tx queues was not being updated due to some issues when
generating the patches.  This change makes sure to add the lines necessary
to update the number of Tx queues correctly.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-01 23:42:55 -07:00