Commit graph

242,824 commits

Author SHA1 Message Date
Jack Morgenstein
bbb07af4cd net/mlx4_core: Don't disable SRIOV if there are active VFs
When unloading the host driver while there are VFs active on VMs,
the PF driver disabled sriov anyway, causing kernel crashes.

We now leave SRIOV enabled, to avoid that.

When the driver is reloaded, __mlx4_init_one is invoked on the PF.
It now checks to see if SRIOV is already enabled on the PF -- and
if so does not enable sriov again.

Signed-off-by: Tal Alon <talal@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 16:27:49 -04:00
hayeswang
f561de33d6 r8152: fix setting RTL8152_UNPLUG
The flag of RTL8152_UNPLUG should only be set when the device is
unplugged, not each time the rtl8152_disconnect() is called.
Otherwise, the device wouldn't be stopped normally.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 16:23:51 -04:00
Manish Chopra
9295f940fb netxen: Fix bug in Tx completion path.
o Driver is not updating sw_consumer while processing Tx completion
  when interface is going down. Due to this interface down path gets
  stuck forever waiting for NAPI to complete.

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 16:22:44 -04:00
Manish Chopra
0d36882013 netxen: Fix BUG "sleeping function called from invalid context"
o __netxen_nic_down() function might sleep while holding spinlock_t(tx_clean_lock).
  Acquire this lock for only releasing TX buffers instead of taking it
  for whole down path.

Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 16:22:43 -04:00
Yinghai Lu
d61b0e87d2 PCI: Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources()
In 5b28541552 ("PCI: Restrict 64-bit prefetchable bridge windows to
64-bit resources"), we added IORESOURCE_MEM_64 to the mask in
pci_assign_unassigned_root_bus_resources(), but not to the mask in
pci_assign_unassigned_bridge_resources().

Add IORESOURCE_MEM_64 to the pci_assign_unassigned_bridge_resources() type
mask.

Fixes: 5b28541552 ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.16+
2014-09-30 13:56:46 -06:00
Mike Turquette
38bf3a7978 Merge branch 'clk-pxa27x' into clk-next 2014-09-30 12:49:42 -07:00
Robert Jarzmik
d40670dc61 clk: add pxa27x clock drivers
Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk.
In the move :
 - convert to new clock framework legacy clocks
 - provide clocks as before for platform data based boards
 - provide clocks through devicetree

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-30 12:31:31 -07:00
Robert Jarzmik
bda0030366 clk: add pxa clocks infrastructure
Add a the common code used by all PXA variants.

This is the first step in the transition from architecture defined
clocks (in arch/arm/mach-pxa) towards clock framework. The goal is to
have the same features (and not all the features) of the existing
clocks, and enable the transition of PXA to device-tree.

All PXA rely on a "CKEN" type clock, which :
 - has a gate (bit in CKEN register)
 - is generated from a PLL, generally divided
 - has an alternate low power clock

Each variant will specialize the CKEN clock :
 - pxa25x have no low power clock
 - pxa27x in low power use always the 13 MHz ring oscillator
 - pxa3xx in low power have specific dividers for each clock

The device-tree provides a list of CLK_* (ex: CLK_USB or CLK_I2C) to get
a handle on the clock. While pxa-clock.h will describe all the clocks of
all the variants, each variant will only use a subset of it.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-30 12:31:30 -07:00
Liviu Dudau
83bbde1cc0 of/pci: Move of_pci_range_to_resource() to of/address.c
We need to enhance of_pci_range_to_resources() enough that it won't make
sense for it to be inline anymore.  Move it to drivers/of/address.c, under
#ifdef CONFIG_PCI.

of_address.h previously implemented of_pci_range_to_resources()
unconditionally, regardless of any config options.  The implementation in
address.c is defined only when CONFIG_OF_ADDRESS=y and CONFIG_PCI=y,
so add a dummy version to avoid build errors when CONFIG_OF or
CONFIG_OF_ADDRESS is not defined.

[bhelgaas: drop extra detail from changelog, move def under CONFIG_PCI,
add dummy of_pci_range_to_resource() for build errors (from Arnd)]
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Catalin Marinas <catalin.marinas@arm.com>
2014-09-30 13:29:09 -06:00
Viresh Kumar
0bf18f19be cpufreq: ppc-corenet: remove duplicate update of cpu_data
'cpu_data' is updated for policy->cpu first and then for all CPUs in
policy->cpus. policy->cpus is guaranteed to contain policy->cpu as well and so
the first write to 'cpu_data' for policy->cpu is redundant. Remove it.

Acked-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-30 21:09:40 +02:00
Rafael J. Wysocki
a8d46b9e4e ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle
The ACPI GPE wakeup from suspend-to-idle is currently based on using
the IRQF_NO_SUSPEND flag for the ACPI SCI, but that is problematic
for a couple of reasons.  First, in principle the ACPI SCI may be
shared and IRQF_NO_SUSPEND does not really work well with shared
interrupts.  Second, it may require the ACPI subsystem to special-case
the handling of device notifications depending on whether or not
they are received during suspend-to-idle in some places which would
lead to fragile code.  Finally, it's better the handle ACPI wakeup
interrupts consistently with wakeup interrupts from other sources.

For this reason, remove the IRQF_NO_SUSPEND flag from the ACPI SCI
and use enable_irq_wake()/disable_irq_wake() with it instead, which
requires two additional platform hooks to be added to struct
platform_freeze_ops.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-30 21:06:07 +02:00
Rafael J. Wysocki
2a8a8ce651 PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq()
Subsequent change sets will add platform-related operations between
dpm_suspend_late() and dpm_suspend_noirq() as well as between
dpm_resume_noirq() and dpm_resume_early() in suspend_enter(), so
export these functions for suspend_enter() to be able to call them
separately and split the invocations of dpm_suspend_end() and
dpm_resume_start() in there accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-30 21:05:59 +02:00
Rafael J. Wysocki
e1253e5e3f Merge branch 'acpica' into acpi-pm 2014-09-30 21:05:34 +02:00
Rafael J. Wysocki
e0fa975d85 ACPICA: Introduce acpi_enable_all_wakeup_gpes()
Add a routine for host OSes to enable all wakeup GPEs and disable
all of the non-wakeup ones at the same time.

It will be used for the handling of GPE wakeup from suspend-to-idle
in Linux.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-30 21:04:47 +02:00
Rafael J. Wysocki
5a0b8deeeb ACPICA: Clear all non-wakeup GPEs in acpi_hw_enable_wakeup_gpe_block()
Since acpi_hw_enable_wakeup_gpe_block() is currently always called
after disabling all GPEs, it can actually write zeros to all
non-wakeup enable bits unconditionally.

That will be useful going forward for disabling runtime GPEs and
enabling wakeup GPEs in one go instead of doing that in two steps
(disable runtime and enable wakeup) which in theory may lead to a
loss of a wakeup event.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-30 21:04:46 +02:00
Viresh Kumar
b1b12babe3 cpufreq: update 'cpufreq_suspended' after stopping governors
Commit 8e30444e15 ("cpufreq: fix cpufreq suspend/resume for intel_pstate")
introduced a bug where the governors wouldn't be stopped anymore for
->target{_index}() drivers during suspend. This happens because
'cpufreq_suspended' is updated before stopping the governors during suspend
and due to this __cpufreq_governor() would return early due to this check:

	/* Don't start any governor operations if we are entering suspend */
	if (cpufreq_suspended)
		return 0;

Fixes: 8e30444e15 ("cpufreq: fix cpufreq suspend/resume for intel_pstate")
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+: 8e30444e15 "cpufreq: fix cpufreq suspend/resume for intel_pstate"
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-30 21:02:34 +02:00
Mark Brown
44b4aa97be clk: gpio-gate: Ensure gpiod_ APIs are prototyped
The gpio-gate clock uses the gpiod_ APIs but does not directly include the
header for them causing build failures in some configurations including ARM
allnoconfig. Include the header directly.

Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-30 11:57:54 -07:00
Aaron Lu
0b8db271f1 ACPI / video: check _DOD list when creating backlight devices
The _DOD method lists which video output device is currently attached so
we should only care about them and ignore others. An user recently
reported that there are two acpi_video interfaces appeared on his system
and one of them doesn't work. From the acpidump, it is found that there
are more than one video output devices that have _BCM control method but
the _DOD lists only one of them. So this patch checks if the video output
device is in the _DOD list and will not create backlight device if it is
not in the list. Also, we consider the broken _DOD case(reflected by the
video->attached_count is 0) and do not change behaviour for those broken
_DOD systems.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=84111
Reported-and-tested-by: ntrrgc@gmail.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-30 20:49:19 +02:00
Rafael J. Wysocki
e4cb0c9e92 Merge branch 'pm-genirq' into acpi-pm 2014-09-30 20:46:13 +02:00
Larry Finger
574a7930d7 rtlwifi: Fix randconfig build error with next-20140930
Configuration randconfig-1412075201 gets an error because driver rtl8821ae
depends on driver btcoexist, but Kconfig does not select it.

Reported-by: Jim Davis <jim.epost@gmail.com>
Cc: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:48 -04:00
Maithili Hinge
8342bdac42 mwifiex: add client mac address while configuring keys on GO.
When mwifiex device becomes GO, unicast traffic between client1 and GO stops
when client2 connects to GO. Reason behind this was PTK getting
overwritten by key_material command for client2 as it did not have client
mac address. So, client1 can no more decode GO's ping packets though it
responds to its broadcast packets.

This patch adds case to check for BSS_ROLE instead of bss_type to set
client mac address while configuring keys when device becomes GO.

Signed-off-by: Maithili Hinge <maithili@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:48 -04:00
Felix Fietkau
315dd1149b ath9k: fix getting tx duration for dynack
On AR9003, tx control and tx status are in separate descriptor rings.
Tx duration is extracted from the tx control descriptor data, which
ar9003_hw_proc_txdesc cannot access.

Fix getting the duration by adding a separate callback for it.

Acked-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:48 -04:00
Sujith Manoharan
4d9f634b02 ath9k: Check early for HW reset
chan_lock is not required for checking if
we are in the middle of a HW reset, so do it
early. This also removes the small window
where the lock is dropped and reacquired.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:48 -04:00
Hante Meuleman
4eb3af7c1d brcmfmac: Add wowl support for PCIE devices.
Add basic wowl (magic packet and disconnect) support. This patch adds
this support only for PCIE bus devices. This feature requires FW which
has support for wowl built in.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:48 -04:00
Hante Meuleman
58b2251e96 brcmfmac: Fix crash on cleanup.
When driver gets unloaded due to error situation there is a chance
a packet gets received while fws has already been cleaned up. This
will result in kernel crash. This patch adds a check to avoid this
crash.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:47 -04:00
Arend van Spriel
f48556e1b6 brcmfmac: assure P2P discovery is disabled when setting P2P_DEVICE mac address
In order to provision the P2P_DEVICE mac address using p2p_da_override iovar
the discovery interface must be disabled. On some targets setting the mac
address failed so disable the discovery interface to be certain.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:47 -04:00
Hante Meuleman
3ba0661099 brcmfmac: Avoid usage of GFP_ATOMIC.
Msgbuf is using GFP_ATOMIC where GFP_KERNEL is also sufficient. On
some platforms the coherent DMA memory is very limited when using
GFP_ATOMIC. This patch changes usage of GFP_ATOMIC to GFP_KERNEL and
uses worker to make this possible for creation of flowring.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:47 -04:00
Hante Meuleman
ff0a623060 brcmfmac: Fix sign issue with IOCTL return code in msgbuf.
Need a cast to assure correct value is propagated.

Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:47 -04:00
Hante Meuleman
ef8596e1f1 brcmfmac: On scan timeout do send received results.
Increase driver scan timeout from 8 to 10 seconds and report results
to cfg80211. Without this patch the already received results were
dropped on driver timeout.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:47 -04:00
Felix Fietkau
5fb9b1b949 ath9k_hw: fix PLL clock initialization for newer SoC
On AR934x and newer SoC devices, the layout of the AR_RTC_PLL_CONTROL
register changed. This currently breaks at least 5/10 MHz operation.
AR933x uses the old layout.

It might also have been causing other stability issues because of the
different location of the PLL_BYPASS bit which needs to be set during
PLL clock initialization.

This patch also removes more instances of hardcoded register values in
favor of properly computed ones with the PLL_BYPASS bit added.

Reported-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:47 -04:00
Felix Fietkau
b874ec8d57 ath9k_hw: reduce ANI spur immunity setting on HT40 extension channel
The cycpwr_thr1 value needs to be lower on the extension channel than on
the control channel, similar to how the register settings are programmed
in the initvals.

Also drop the unnecessary check for HT40 - this register can always be
written. This patch has been reported to improve HT40 stability and
throughput in some environments.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:47 -04:00
Felix Fietkau
171cdab8c7 Revert "ath9k_hw: reduce ANI firstep range for older chips"
This reverts commit 09efc56345

I've received reports that this change is decreasing throughput in some
rare conditions on an AR9280 based device

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:46 -04:00
Avinash Patil
b48f8800bb mwifiex: remove unnecessary rx_q lock
SKB lists have their own lock. So this lock is not needed.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:46 -04:00
Avinash Patil
b43a0d9d01 mwifiex: do not decrement rx_pending count twice
This patch fixes an issue with rx processing function where we were
decrementing rx_pending count twice.

Patch also queues correct main_work item when rx_pending count reaches
low watermark.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:46 -04:00
Avinash Patil
f73e557bca mwifiex: fix soft lockup during iperf UDP RX
A soft lockup was observed on ARM multicore platform while UDP
RX iperf was running on station.

Reason for this is delay_main_task was not taken into consideration while
jumping to process_start. Now if delay_main_task is true, we would exit
mwifiex_main_process instead of going to process_start again.
This ensure other process is scheduled on this CPU and soft lockup is avoided.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kevin Gan <ganhy@marvell.com>
Signed-off-by: Marc Yang <yangyang@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:46 -04:00
Felix Fietkau
83322eb862 ath9k_hw: disable hardware ad-hoc flag on ar934x rev 3
On AR934x rev 3, settin the ad-hoc flag completely messes up hardware
state - beacons get stuck, almost no packets make it out, hardware is
constantly reset.

When leaving out that flag and setting up the hw like in AP mode, TSF
timers won't be automatically synced, but at least the rest works.

AR934x rev 2 and older are not affected by this bug

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:39 -04:00
Felix Fietkau
09c74f7bce ath9k: use ah->get_mac_revision for all SoC devices if available
It is needed for AR934x as well

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:39 -04:00
Felix Fietkau
005eff5919 ath5k: add missing include for debug code
Needed for calling vmalloc()/vfree()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:39 -04:00
Larry Finger
ef09396ef6 rtlwifi: rtl8188ee: rtl8723ae: rtl8821ae: Initialize some variables
In a number of places, kmalloc or valloc were used to acquire memory.
To ensure that these locations are correctly initialized, the calls were
changed to kzalloc and vzalloc. The change fixes a problem that was causing
HT operations to be cancelled.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:38 -04:00
Larry Finger
557f933113 rtlwifi: rtl8188ee: rtl8192com: rtl8192cu: rtl8192ee: rtl8723ae: rtl87323be: rtl8821ae: Use common cmd_send_packet
A locking problem was found in routine _rtl92ee_cmd_send_packet() that led
to system freezes. Upon inspection, several drivers had the same problem;
however, the routines all used the same code. The common code has been
moved into rtlwifi.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:38 -04:00
Larry Finger
9f087a9244 rtlwifi: rtl8192ce: rtl8192common: Update for latest version of Realtek drivers
Realtek released new drivers on 06/28/2014. These changes implement all their
changes into the kernel version of the driver. In addition, these modifications
are part of the process of unifying the Realtek and kernel code bases.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:15 -04:00
Larry Finger
5c99f04fec rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14
This patch updates the driver to match the latest Realtek release, and
it is an important step in getting the internal code source at Realtek to match
the code in the kernel. The primary reason for this is to make it easier for
Realtek to maintain the kernel source without requiring an intermediate like me.

In this process of merging the two source repositories, there are a lot
of changes in both, and this commit is rather large.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:15 -04:00
Larry Finger
0529c6b817 rtlwifi: rtl8723ae: Update driver to match 06/28/14 Realtek version
Not only does this patch update the driver to match the latest Realtek release,
it is an important step in getting the internal code source at Realtek to match
the code in the kernel. The primary reason for this is to make it easier for
Realtek to maintain the kernel source without requiring an intermediate like me.

In this process of merging the two source repositories, there are a lot
of changes in both, and this commit is rather large.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:14 -04:00
Larry Finger
b1a3bfc97c rtlwifi: rtl8192ee: Move driver from staging to the regular tree
This driver was entered into staging a few cycles ago because there was
not time to integrate the Realtek version into the support routines in
the kernel. Now that there is an effort to converg the code base from Linux
and the Realtek repo, it is time to move this driver. In addition, all the
updates included in the 06/28/2014 version of the Realtek drivers are
included here.

With this change, it will be necessary to delete the staging driver. That
will be handled in a separate patch. As it impacts the staging tree, such a
patch is sent to a different destination.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:14 -04:00
Larry Finger
7fe3b3abb5 rtlwifi: rtl8188ee: rtl8821ae: Fix a queue locking problem
The code fails to lock the skb queue, which leads to a number of problems.
This patch also fixes a Sparse warning about using a memset of 1 byte.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: troy_tan@realsil.com.cn
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:14 -04:00
Rafał Miłecki
a0196d1117 bcma: use chipcommon node from DT for SoC GPIO chip
This will allow us to define GPIO-attached devices (LEDs, buttons) in
the the device tree.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:14 -04:00
Hauke Mehrtens
2101e533f4 bcma: register bcma as device tree driver
This driver is used by the bcm53xx ARM SoC code. Now it is possible to
give the address of the chipcommon core in device tree and bcma will
search for all the other cores.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:14 -04:00
Amitkumar Karwar
7e174833de mwifiex: add more dump information for PCIe interface
We will now dump MAC, APU, CIU, ICU firmware memory segments also
for PCIe interface. Following is the updated userspace script which
reads firmware dump information.

    mwifiex_pcie_fw_dump.sh: #!/bin/bash
    ethtool --set-dump mlan0 0
    ethtool --get-dump mlan0
    ethtool --get-dump mlan0 data /tmp/ITCM.log

    ethtool --set-dump mlan0 1
    ethtool --get-dump mlan0
    ethtool --get-dump mlan0 data /tmp/DTCM.log

    ethtool --set-dump mlan0 2
    ethtool --get-dump mlan0
    ethtool --get-dump mlan0 data /tmp/SQRAM.log

    ethtool --set-dump mlan0 3
    ethtool --get-dump mlan0
    ethtool --get-dump mlan0 data /tmp/IRAM.log

    ethtool --set-dump mlan0 4
    ethtool --get-dump mlan0
    ethtool --get-dump mlan0 data /tmp/APU.log

    ethtool --set-dump mlan0 5
    ethtool --get-dump mlan0
    ethtool --get-dump mlan0 data /tmp/CIU.log

    ethtool --set-dump mlan0 6
    ethtool --get-dump mlan0
    ethtool --get-dump mlan0 data /tmp/ICU.log

    ethtool --set-dump mlan0 7
    ethtool --get-dump mlan0
    ethtool --get-dump mlan0 data /tmp/MAC.log

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:14 -04:00
Amitkumar Karwar
24716876d8 mwifiex: error path handling in pcie firmware dump
This patch takes care of missing error paths in firmware dump.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30 13:17:13 -04:00
Larry Finger
f823182bc2 staging: r8192ee: Remove staging driver
A new version of this driver has been merged into the regular wireless tree.
The staging version is hereby removed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-30 09:24:31 -07:00