The beep control helper function blindly stores the values in two
stereo channels no matter whether the actual control is mono or
stereo. This is practically harmless, but it annoys the recently
introduced sanity check, resulting in an error when the checker is
enabled.
This patch corrects the behavior to store only on the defined array
member.
Fixes: 0401e8548e ("ALSA: hda - Move beep helper functions to hda_beep.c")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull the RST line low then high when initializing the driver,
in order to force a reset of the chip.
Previously, the line was not pulled low, which could result in
the chip registers not resetting to their default values on boot.
Signed-off-by: Mike Willard <mwillard@izotope.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200401205454.79792-1-mwillard@izotope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we find ourselves waiting on a MI_SEMAPHORE_WAIT, either within the
user batch or in our own preamble, the engine raises a
GT_WAIT_ON_SEMAPHORE interrupt. We can unmask that interrupt and so
respond to a semaphore wait by yielding the timeslice, if we have
another context to yield to!
The only real complication is that the interrupt is only generated for
the start of the semaphore wait, and is asynchronous to our
process_csb() -- that is, we may not have registered the timeslice before
we see the interrupt. To ensure we don't miss a potential semaphore
blocking forward progress (e.g. selftests/live_timeslice_preempt) we mark
the interrupt and apply it to the next timeslice regardless of whether it
was active at the time.
v2: We use semaphores in preempt-to-busy, within the timeslicing
implementation itself! Ergo, when we do insert a preemption due to an
expired timeslice, the new context may start with the missed semaphore
flagged by the retired context and be yielded, ad infinitum. To avoid
this, read the context id at the time of the semaphore interrupt and
only yield if that context is still active.
Fixes: 8ee36e048c ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200407130811.17321-1-chris@chris-wilson.co.uk
This needs to return the newly allocated struct but instead it returns
zero which leads to an immediate Oops in the caller.
Fixes: 09f5f68070 ("ipmi: kcs: aspeed: Implement v2 bindings")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20200407122149.GA100026@mwanda>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
If KVM wasn't used at all before we crash the cleanup procedure fails with
BUG: unable to handle page fault for address: ffffffffffffffc8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 23215067 P4D 23215067 PUD 23217067 PMD 0
Oops: 0000 [#8] SMP PTI
CPU: 0 PID: 3542 Comm: bash Kdump: loaded Tainted: G D 5.6.0-rc2+ #823
RIP: 0010:crash_vmclear_local_loaded_vmcss.cold+0x19/0x51 [kvm_intel]
The root cause is that loaded_vmcss_on_cpu list is not yet initialized,
we initialize it in hardware_enable() but this only happens when we start
a VM.
Previously, we used to have a bitmap with enabled CPUs and that was
preventing [masking] the issue.
Initialized loaded_vmcss_on_cpu list earlier, right before we assign
crash_vmclear_loaded_vmcss pointer. blocked_vcpu_on_cpu list and
blocked_vcpu_on_cpu_lock are moved altogether for consistency.
Fixes: 31603d4fc2 ("KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200401081348.1345307-1-vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Except destination shorthand, a destination value 0xffffffff is used to
broadcast interrupts, let's also filter out this for single target IPI
fastpath.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1585815626-28370-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Several fixes for corner cases of nesting. Still relevant as it might
crash host or first level guest or temporarily leak memory.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=oinE
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fixes for vsie (nested hypervisors)
- Several fixes for corner cases of nesting. Still relevant as it might
crash host or first level guest or temporarily leak memory.
We have to properly retry again by returning -EINVAL immediately in case
somebody else instantiated the table concurrently. We missed to add the
goto in this function only. The code now matches the other, similar
shadowing functions.
We are overwriting an existing region 2 table entry. All allocated pages
are added to the crst_list to be freed later, so they are not lost
forever. However, when unshadowing the region 2 table, we wouldn't trigger
unshadowing of the original shadowed region 3 table that we replaced. It
would get unshadowed when the original region 3 table is modified. As it's
not connected to the page table hierarchy anymore, it's not going to get
used anymore. However, for a limited time, this page table will stick
around, so it's in some sense a temporary memory leak.
Identified by manual code inspection. I don't think this classifies as
stable material.
Fixes: 998f637cc4 ("s390/mm: avoid races on region/segment/page table shadowing")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Whenever we get an -EFAULT, we failed to read in guest 2 physical
address space. Such addressing exceptions are reported via a program
intercept to the nested hypervisor.
We faked the intercept, we have to return to guest 2. Instead, right
now we would be returning -EFAULT from the intercept handler, eventually
crashing the VM.
the correct thing to do is to return 1 as rc == 1 is the internal
representation of "we have to go back into g2".
Addressing exceptions can only happen if the g2->g3 page tables
reference invalid g2 addresses (say, either a table or the final page is
not accessible - so something that basically never happens in sane
environments.
Identified by manual code inspection.
Fixes: a3508fbe9d ("KVM: s390: vsie: initial support for nested virtualization")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-3-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In case we have a region 1 the following calculation
(31 + ((gmap->asce & _ASCE_TYPE_MASK) >> 2)*11)
results in 64. As shifts beyond the size are undefined the compiler is
free to use instructions like sllg. sllg will only use 6 bits of the
shift value (here 64) resulting in no shift at all. That means that ALL
addresses will be rejected.
The can result in endless loops, e.g. when prefix cannot get mapped.
Fixes: 4be130a084 ("s390/mm: add shadow gmap support")
Tested-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-2-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description, remove WARN_ON_ONCE]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Michael noticed that userns limit for number of time namespaces is missing.
Furthermore, time namespace introduced UCOUNT_TIME_NAMESPACES, but didn't
introduce an array member in user_table[]. It would make array's
initialisation OOB write, but by luck the user_table array has an excessive
empty member (all accesses to the array are limited with UCOUNT_COUNTS - so
it silently reuses the last free member.
Fixes user-visible regression: max_inotify_instances by reason of the
missing UCOUNT_ENTRY() has limited max number of namespaces instead of the
number of inotify instances.
Fixes: 769071ac9f ("ns: Introduce Time Namespace")
Reported-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20200406171342.128733-1-dima@arista.com
Looking at the contents of the /proc/PID/ns/time_for_children symlink shows
an anomaly:
$ ls -l /proc/self/ns/* |awk '{print $9, $10, $11}'
...
/proc/self/ns/pid -> pid:[4026531836]
/proc/self/ns/pid_for_children -> pid:[4026531836]
/proc/self/ns/time -> time:[4026531834]
/proc/self/ns/time_for_children -> time_for_children:[4026531834]
/proc/self/ns/user -> user:[4026531837]
...
The reference for 'time_for_children' should be a 'time' namespace, just as
the reference for 'pid_for_children' is a 'pid' namespace. In other words,
the above time_for_children link should read:
/proc/self/ns/time_for_children -> time:[4026531834]
Fixes: 769071ac9f ("ns: Introduce Time Namespace")
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/a2418c48-ed80-3afe-116e-6611cb799557@gmail.com
Commit 1d5c76e664 ("xen-blkfront: switch kcalloc to kvcalloc for
large array allocation") didn't fix the issue it was meant to, as the
flags for allocating the memory are GFP_NOIO, which will lead the
memory allocation falling back to kmalloc().
So instead of GFP_NOIO use GFP_KERNEL and do all the memory allocation
in blkfront_setup_indirect() in a memalloc_noio_{save,restore} section.
Fixes: 1d5c76e664 ("xen-blkfront: switch kcalloc to kvcalloc for large array allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20200403090034.8753-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Make event channel functions pass event channel port using
evtchn_port_t type. It eliminates signed <-> unsigned conversion.
Signed-off-by: Yan Yankovskyi <yyankovskyi@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200323152343.GA28422@kbp1-lhp-F74019
Signed-off-by: Juergen Gross <jgross@suse.com>
This reverts commit 5a6b4cc5b7.
It has been queued properly in the akpm tree, this version is just
creating conflicts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When CONFIG_DEVFREQ_THERMAL is disabled all functions except
of_devfreq_cooling_register_power() were already inlined. Also inline
the last function to avoid compile errors when multiple drivers call
of_devfreq_cooling_register_power() when CONFIG_DEVFREQ_THERMAL is not
set. Compilation failed with the following message:
multiple definition of `of_devfreq_cooling_register_power'
(which then lists all usages of of_devfreq_cooling_register_power())
Thomas Zimmermann reported this problem [0] on a kernel config with
CONFIG_DRM_LIMA={m,y}, CONFIG_DRM_PANFROST={m,y} and
CONFIG_DEVFREQ_THERMAL=n after both, the lima and panfrost drivers
gained devfreq cooling support.
[0] https://www.spinics.net/lists/dri-devel/msg252825.html
Fixes: a76caf55e5 ("thermal: Add devfreq cooling")
Cc: stable@vger.kernel.org
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200403205133.1101808-1-martin.blumenstingl@googlemail.com
If nested events are blocked, don't clear the mtf_pending flag to avoid
missing later delivery of the MTF VM-exit.
Fixes: 5ef8acbdd6 ("KVM: nVMX: Emulate MTF when performing instruction emulation")
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20200406201237.178725-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The exception trampoline in .fixup section is not needed, the exception
handling code can jump directly to the label in the .text section.
Changes since v1:
- Fix commit message.
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200406202108.74300-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HP new platform has new mute led feature.
COEF index 0x34 bit 5 to control playback mute led.
COEF index 0x35 bit 2 and bit 3 to control Mic mute led.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Note Book supported new mute Led.
Hardware PIN was not enough to meet old LED rule.
JD2 to control playback mute led.
GPO3 to control capture mute led.
(ALC285 didn't control GPO3 via verb command)
This two PIN just could control by COEF registers.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Certain boards with GP107/GP108 chipsets hang (often, but randomly) for
unknown reasons during GR initialisation.
The first tell-tale symptom of this issue is:
nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 409800 [ TIMEOUT ]
appearing in dmesg, likely followed by many other failures being logged.
Karol found this WAR for the issue a while back, but efforts to isolate
the root cause and proper fix have not yielded success so far. I've
modified the original patch to include a few more details, limit it to
GP107/GP108 by default, and added a config option to override this choice.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Fixes the infamous 'runtime PM' bug many users are facing on Laptops with
Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.
Depending on the used kernel there might be messages like those in demsg:
"nouveau 0000:01:00.0: Refused to change power state, currently in D3"
"nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config
space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.
It's still unkown why this issue exists, but this is a reliable workaround
and solves a very annoying issue for user having to choose between a
crashing kernel or higher power consumption of their Laptops.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Mika Westerberg <mika.westerberg@intel.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205623
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When nouveau processes GPU faults, it checks to see if the fault address
falls within the "unmanaged" range which is reserved for fixed allocations
instead of addresses chosen by the core mm code. If start is greater than
or equal to svmm->unmanaged.limit, then limit will also be greater than
svmm->unmanaged.limit which is greater than svmm->unmanaged.start and the
start = max_t(u64, start, svmm->unmanaged.limit) will change nothing.
Just remove the useless lines of code.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When migrating system memory to GPU memory, check that SVM has been
enabled. Even though most errors can be ignored since migration is
a performance optimization, return an error because this is a violation
of the API.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
find_vma_intersection(mm, start, end) only guarantees that end is greater
than or equal to vma->vm_start but doesn't guarantee that start is
greater than or equal to vma->vm_start. The calculation for the
intersecting range in nouveau_svmm_bind() isn't accounting for this and
can call migrate_vma_setup() with a starting address less than
vma->vm_start. This results in migrate_vma_setup() returning -EINVAL for
the range instead of nouveau skipping that part of the range and migrating
the rest.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
As there is no need to check for the return value of debugfs_create_file
and drm_debugfs_create_files, remove unnecessary checks and error
handling in nouveau_drm_debugfs_init.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The warning message when a led is renamed due to name collition can fail
to show proper original name if init_data is used. Eg:
[ 9.073996] leds-gpio a0040000.leds_0: Led (null) renamed to red_led_1 due to name collision
Fixes: bb4e9af034 ("leds: core: Add support for composing LED class device names")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The bitfield 'enabled' should bit unsigned, so make it unsigned.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Unburden the drivers from checking if a call to commit_rqs() is valid by
not calling it when there are no requests to commit.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use in_compat_syscall to copy directly from the 32-bit ABI structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move the handling of the SNAPSHOT_SET_SWAP_AREA ioctl from the main
ioctl helper into a helper function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If we want to percolate information back from the HW, up through the GEM
context, we need to wait until the intel_context is scheduled out for
the last time. This is handled by the retirement of the intel_context's
barrier, i.e. by listening to the pulse after the notional unpin. So
wait until the intel_context is finally retired before releasing the
engine, so that we can inspect the final context state and pass it on.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406155840.1728-3-chris@chris-wilson.co.uk
Allow the caller to also wait upon the barriers stored in i915_active.
v2: Hook up i915_request_await_active(I915_ACTIVE_AWAIT_BARRIER) as well
for completeness, and avoid the lazy GEM_BUG_ON()!
v3: Pull flush_lazy_signals() under the active-ref protection as it too
walks the rbtree and so we must be careful that we do not free it as we
iterate.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406155840.1728-2-chris@chris-wilson.co.uk
Later use will require asynchronous waits on the active timelines, but
will not utilize an async wait on the exclusive channel. Make the await
on the exclusive fence explicit in the selection flags.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406155840.1728-1-chris@chris-wilson.co.uk
Instead of the various open coded calls to set the NFS_INO_STALE bit
and call nfs_zap_caches(), consolidate them into a single function
nfs_set_inode_stale().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
- Update the ACPICA code in the kernel to upstream revision 20200326
including:
* Fix for a typo in a comment field (Bob Moore).
* acpiExec namespace init file fixes (Bob Moore).
* Addition of NHLT to the known tables list (Cezary Rojewski).
* Conversion of PlatformCommChannel ASL keyword to PCC (Erik
Kaneda).
* acpiexec cleanup (Erik Kaneda).
* WSMT-related typo fix (Erik Kaneda).
* sprintf() utility function fix (John Levon).
* IVRS IVHD type 11h parsing implementation (Michał Żygowski).
* IVRS IVHD type 10h reserved field name fix (Michał Żygowski).
- Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai).
- Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
Kammela).
- Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans
de Goede).
- Fix documentation of the "acpi_backlight" kernel command line
switch (Randy Dunlap).
- Clean up the acpi_get_psd_map() CPPC library routine (Liguang
Zhang).
-----BEGIN PGP SIGNATURE-----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=b3Dp
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Additional ACPI updates.
These update the ACPICA code in the kernel to the 20200326 upstream
revision, fix an ACPI-related CPU hotplug deadlock on x86, update
Intel Tiger Lake device IDs in some places, add a new ACPI backlight
blacklist entry, update the "acpi_backlight" kernel command line
switch documentation and clean up a CPPC library routine.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200326
including:
* Fix for a typo in a comment field (Bob Moore)
* acpiExec namespace init file fixes (Bob Moore)
* Addition of NHLT to the known tables list (Cezary Rojewski)
* Conversion of PlatformCommChannel ASL keyword to PCC (Erik
Kaneda)
* acpiexec cleanup (Erik Kaneda)
* WSMT-related typo fix (Erik Kaneda)
* sprintf() utility function fix (John Levon)
* IVRS IVHD type 11h parsing implementation (Michał Żygowski)
* IVRS IVHD type 10h reserved field name fix (Michał Żygowski)
- Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai)
- Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
Kammela)
- Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans de
Goede)
- Fix documentation of the "acpi_backlight" kernel command line
switch (Randy Dunlap)
- Clean up the acpi_get_psd_map() CPPC library routine (Liguang
Zhang)"
* tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86: ACPI: fix CPU hotplug deadlock
thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDs
platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID
ACPI: Update Tiger Lake ACPI device IDs
ACPI: video: Use native backlight on Acer Aspire 5783z
ACPI: video: Docs update for "acpi_backlight" kernel parameter options
ACPICA: Update version 20200326
ACPICA: Fixes for acpiExec namespace init file
ACPICA: Add NHLT table signature
ACPICA: WSMT: Fix typo, no functional change
ACPICA: utilities: fix sprintf()
ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
ACPICA: Change PlatformCommChannel ASL keyword to PCC
ACPICA: Fix IVRS IVHD type 10h reserved field name
ACPICA: Implement IVRS IVHD type 11h parsing
ACPICA: Fix a typo in a comment field
ACPI: CPPC: clean up acpi_get_psd_map()
__i915_gem_object_flush_map() takes a byte range, so feed it the written
bytes and do not mistake the u32 index as bytes!
Fixes: a679f58d05 ("drm/i915: Flush pages on acquisition")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406114821.10949-1-chris@chris-wilson.co.uk
(cherry picked from commit 30c88a47f1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If the user passes in a readonly reloc[], by the time we notice we have
already committed to modifying the execobjects, or have indeed done so
already. Reporting the failure just compounds the issue as we have no
second pass to fall back to anymore.
"Be damned if you do, and damned if you don't."
Testcase: igt/gem_exec_reloc/readonly
Fixes: 7dc8f11437 ("drm/i915/gem: Drop relocation slowpath")
References: fddcd00a49 ("drm/i915: Force the slow path after a user-write error")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331162150.3635-1-chris@chris-wilson.co.uk
(cherry picked from commit 97a37c919f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When we allocate space in the GGTT we may have to allocate a larger
region than will be populated by the object to accommodate fencing. Make
sure that this space beyond the end of the buffer points safely into
scratch space, in case the HW tries to access it anyway (e.g. fenced
access to the last tile row).
v2: Preemptively / conservatively guard gen6 ggtt as well.
Reported-by: Imre Deak <imre.deak@intel.com>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1554
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331152348.26946-1-chris@chris-wilson.co.uk
(cherry picked from commit 4d6c185908)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
