Updates for v6.17
CI:
- uprev mesa and ci-templates
- use shallow clone to speed up build jobs
- remove sdm845/cheza jobs. These runners are no more (RIP
dear chezas)
- fix runner tag for i915 cml runners
- uprev igt to pull in msm test fixes
Core:
- VM_BIND support!
- single source of truth for UBWC configuration. Adds a global soc
driver for UBWC config which is used from display and GPU. (And
later vidc/camera/etc)
- Decouple ties between GPU and KMS, adding a `separate_gpu_kms`
modparam to allow the GPU and KMS to bind to separate DRM devices.
This should better deal with more exotic SoC configurations where
the number of GPUs is different from number of DPUs. The default
behavior is to still come up as a single unified DRM device to
avoid surprising userspace.
DP:
- major rework of the I/O accessors
DPU:
- use version checks instead of feature bits
- SM8750 support
- set min_prefill_lines for SC8180X
DSI:
- SM8750 support
GPU:
- speedbin support for X1-85
- X1-45 support
MDSS:
- SM8750 support
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Robin Clark <robin.clark@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACSVV0217R+kpoWQJeuYGHf6q_4aFyEJuKa=dZZKOnLQzFwppg@mail.gmail.com
drm/i915 feature pull #2 for v6.17:
Features and functionality:
- Add drm_panic support for both i915 and xe drivers (Jocelyn Falempe)
- Add initial flip queue implementation, disabled by default, for LNL and PTL
(Ville)
- Add support for Wildcat Lake (WCL) display, version 30.02 (Matt Roper, Matt
Atwood, Dnyaneshwar)
- Extend drm_panel and follower support to DDI eDP (Arun)
Refactoring and cleanups:
- Make all global state objects opaque (Jani)
- Move display works to display specific unordered workqueue (Luca)
- Add and use struct drm_device based pcode interface (Jani, Lucas)
- Use clamp() instead of max()+min() combo (Ankit)
- Simplify wait for power well disable (Jani)
- Various stylistics cleanups and renames (Jani)
Fixes:
- Deal with loss of pipe DMC state (Ville)
- Fix PTL HDCP2 stream status check (Suraj)
- Add workaround for ADL-P DKL PHY DP and HDMI (Nemesa)
- Fix skl_print_wm_changes() stack usage with KMSAN (Arnd Bergmann)
- Fix PCON capability reads on non-branch devices (Chaitanya)
- Fix which platforms have ultra joiner (Ankit)
DRM core changes:
- Add ttm_bo_kmap_try_from_panic() for xe drm_panic support (Jocelyn Falempe)
- Add private pointer to struct drm_scanout buffer for xe/i915 drm_panic support
(Jocelyn Falempe)
Merges:
- Backmerge drm-next for drm_panel and xe changes (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6d728bf6ef23681b00dfbc7da9aeae41042dee02@intel.com
The vast majority of drivers that use GEM-SHMEM helpers do not use
an s/g table for imported buffers; specifically all drivers that use
DRM_GEM_SHMEM_DRIVER_OPS. Therefore convert the initializer macro
to DRM_GEM_SHMEM_DRIVER_OPS_NO_MAP_SGT and remove the latter. This
helps to avoid swiotbl errors, such as seen with some Aspeed systems
ast 0000:07:00.0: swiotlb buffer is full (sz: 3145728 bytes), total 32768 (slots), used 0 (slots)
The error is caused by the system's limited DMA capabilities and can
happen with any GEM-SHMEM-based driver. It results in a performance
penalty.
In the case of vgem and vkms, the devices do not support DMA at all,
which can result in failure to map the buffer object into the kernel's
address space. [1][2] Avoiding the s/g table fixes this problem.
The other drivers based on GEM-SHMEM, imagination, lima, panfrost,
panthor, v3d and virtio, use the s/g table of imported buffers. Neither
driver uses the default initializer, so they won't be affected by
this change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Zenghui Yu <zenghui.yu@linux.dev>
Closes: https://lore.kernel.org/dri-devel/6d22bce3-4533-4cfa-96ba-64352b715741@linux.dev/ # [1]
Reported-by: José Expósito <jose.exposito89@gmail.com>
Closes: https://lore.kernel.org/dri-devel/20250311172054.2903-1-jose.exposito89@gmail.com/ # [2]
Tested-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20250630143537.309052-1-tzimmermann@suse.de
Correct the kernel-doc comment for DRM_BRIDGE_OP_HDMI_CEC_ADAPTER member
of enum drm_bridge_ops. This seems to be just a copy-paste artifact
from DRM_BRIDGE_OP_HDMI_CEC_NOTIFIER above.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250704-drm-bridge-kdoc-fix-v1-1-b08c67212851@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Make the values a bit more meaningful.
This commit is intentionally cross-subsystem to ease review, as the
patchset is intended to be merged together, with a maintainer
consensus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660981/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
This bit is set iff the UBWC version is 1.0. That notably does not
include QCM2290's "no UBWC".
This commit is intentionally cross-subsystem to ease review, as the
patchset is intended to be merged together, with a maintainer
consensus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660971/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
As discussed a lot in the past, the UBWC config must be coherent across
a number of IP blocks (currently display and GPU, but it also may/will
concern camera/video as the drivers evolve).
So far, we've been trying to keep the values reasonable in each of the
two drivers separately, but it really make sense to do so centrally,
especially given certain fields (e.g. HBB) may need to be gathered
dynamically.
To reduce room for error, move to fetching the config from a central
source, so that the data programmed into the hardware is consistent
across all multimedia blocks that request it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660963/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add a file that will serve as a single source of truth for UBWC
configuration data for various multimedia blocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660959/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add a VM_BIND ioctl for binding/unbinding buffers into a VM. This is
only supported if userspace has opted in to MSM_PARAM_EN_VM_BIND.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661524/
This submitqueue type isn't tied to a hw ringbuffer, but instead
executes on the CPU for performing async VM_BIND ops.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661517/
We'll be re-using these for the VM_BIND ioctl.
Also, rename a few things in the uapi header to reflect that syncobj use
is not specific to the submit ioctl.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661512/
Buffers that are not shared between contexts can share a single resv
object. This way drm_gpuvm will not track them as external objects, and
submit-time validating overhead will be O(1) for all N non-shared BOs,
instead of O(n).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661497/
Add a SET_PARAM for userspace to request to manage to the VM itself,
instead of getting a kernel managed VM.
In order to transition to a userspace managed VM, this param must be set
before any mappings are created.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661494/
Add PRR (Partial Resident Region) is a bypass address which make GPU
writes go to /dev/null and reads return zero. This is used to implement
vulkan sparse residency.
To support PRR/NULL mappings, we allocate a page to reserve a physical
address which we know will not be used as part of a GEM object, and
configure the SMMU to use this address for PRR/NULL mappings.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661486/
If the callback is going to have to attempt to grab more locks, it is
useful to have an ww_acquire_ctx to avoid locking order problems.
Why not use the drm_exec helper instead? Mainly because (a) where
ww_acquire_init() is called is awkward, and (b) we don't really
need to retry after backoff, we can just move on to the next object.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661463/
For UNMAP/REMAP steps we could be needing to lock objects that are not
explicitly listed in the VM_BIND ioctl in order to tear-down unmapped
VAs. These helpers handle locking/preparing the needed objects.
Note that these functions do not strictly require the VM changes to be
applied before the next drm_gpuvm_sm_map_lock()/_unmap_lock() call. In
the case that VM changes from an earlier drm_gpuvm_sm_map()/_unmap()
call result in a differing sequence of steps when the VM changes are
actually applied, it will be the same set of GEM objects involved, so
the locking is still correct.
v2: Rename to drm_gpuvm_sm_*_exec_locked() [Danilo]
v3: Expand comments to show expected usage, and explain how the usage
is safe in the case of overlapping driver VM_BIND ops.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/661458/
Update the RPMH level definitions to include TURBO_L5 corner.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/661840/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
add support to add a directory for each client-id
with root at the dri level. Since the clients are
unique and not just related to one single drm device,
so it makes more sense to add all the client based
nodes with root as dri.
Also create a debugfs file which show the process
information for the client and create a symlink back
to the parent drm device from each client.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-3-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Requirement is to create per client-id based directories to
hold key debugging information and for that access to
root debugfs dentry is need which is not in one place
and that information cannot be stored in drm_device.
Move the debugfs functionality from drm_drv.c and drm_accel.c
to drm_debugfs.c This enables debugfs root node reference
directly drm_debugfs.c and hence enable to create per client-id
directory.
v8: Create drm_accel dentry only if it's config is enabled (Jeff, Hugo)
v8: Merge drm_drv and drm_accel debugfs patches (Koenig, Christian)
v10: Since we moved drm_debugfs_root, hence to handle drm bridge
debugfs add a new function which call drm_bridge_debugfs_params where
drm_debugfs_root is accessible.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-2-sunil.khatri@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
One additional PCI ID is added in Bspec for BMG, Add it so that
driver recognizes this device with this new ID.
Bspec: 68090
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Vodapalli, Ravi Kumar <ravi.kumar.vodapalli@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250704103527.100178-1-ravi.kumar.vodapalli@intel.com
Rather than returning ERR_PTR or NULL on failure, replace the NULL
return with ERR_PTR(-ENOMEM). This simplifies error handling at the
caller. While here, add kernel documentation for
drmm_alloc_ordered_workqueue.
Cc: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20250702232831.3271328-2-matthew.brost@intel.com
Documentation for luminance_set for struct drm_edp_backlight_info
was missed which causes warnings.
Fixes: 2af612ad42 ("drm/dp: Introduce new member in drm_backlight_info")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@gmail.com>
Link: https://lore.kernel.org/r/20250701085054.746408-1-suraj.kandpal@intel.com
Drop the unused MIPI_DSI_MODE_VSYNC_FLUSH flag. Whether or not a display
FIFO flush on vsync is required to avoid sending garbage to the panel is
not a property of the DSI link, but of the integration between display
controller and DSI host bridge.
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250627-dsi-vsync-flush-v2-4-4066899a5608@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Change the argument type to u32 for the default level being sent
since it has to now account for luminance value which has to be
set for DP_EDP_PANEL_LUMINANCE_TARGET_VALUE.
--v2
-No need to typecast [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-10-suraj.kandpal@intel.com
Use u32 for level variable as one may need to pass value for
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
--v2
-Typecase is not needed [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-8-suraj.kandpal@intel.com
Change the current_level argument type to u32 from u16
since it can now carry the value which it gets from
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-6-suraj.kandpal@intel.com
Use u32 instead of u16 for max variable in drm_edp_backlight_info
since it can now hold max luminance range value which is u32.
We will set this max with max_luminance value when luminance_set is
true.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-5-suraj.kandpal@intel.com
Add new argument to drm_edp_backlight_init which gives the
max_luminance which will be needed to set the max values for
backlight.
--v2
-Use pass only max luminance instead of luminance_range_info struct
[Arun]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-4-suraj.kandpal@intel.com
Add bool argument in drm_edp_backlight init to provide the drivers
option to choose if they want to use luminance values to
manipulate brightness.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-3-suraj.kandpal@intel.com
Introduce luminance_set flag which indicates if we can manipulate
backlight using luminance value or not which is only possible
after eDP v1.5.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-2-suraj.kandpal@intel.com
Add FourCC definitions for the 48-bit RGB/BGR formats to the
DRM/KMS uapi.
The format will be used by the Raspberry Pi PiSP Back End,
supported by a V4L2 driver in kernel space and by libcamera in
userspace, which uses the DRM FourCC identifiers.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Link: https://lore.kernel.org/r/20240226132544.82817-1-jacopo.mondi@ideasonboard.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Move big-endian support from drm_fb_xrgb8888_to_rgb565() into the new
helper drm_xrgb8888_to_rgb565be(). The functionality is required for
displays with big-endian byte order. Update all callers.
With the change applied, drm_fb_xrgb8888_to_rgb565() has the same
signature as the other conversion functions, which is required for
further updates to drm_fb_blit(). Also makes the format-conversion
helper available to panic handlers, if necessary.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250625114911.1121301-1-tzimmermann@suse.de
Update header inclusions to follow IWYU (Include What You Use)
principle.
Note that kernel.h is discouraged to be included as it's written
at the top of that file.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250627103454.702606-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
If the ttm bo is backed by pages, then it's possible to safely kmap
one page at a time, using kmap_try_from_panic().
Unfortunately there is no way to do the same with ioremap, so it
only supports the kmap case.
This is needed for proper drm_panic support with xe driver.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250624091501.257661-6-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
This allows driver to set some private data in get_scanout_buffer(),
and re-use them in set_pixel() callback.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-2-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Add 1, 2, 3, and 4 component 32b float formats, so that buffers with
these formats can be imported/exported with fourcc+modifier, and/or
created by gbm.
These correspond to PIPE_FORMAT_{R32,R32G32,R32G32B32,R32G32B32A32}_FLOAT
in mesa.
v2: Fix comment describing float32 layout [Sima]
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Acked-by: Simona Vetter <simona@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Link: https://lore.kernel.org/r/20250625173712.116446-3-robin.clark@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Not something that is likely to be scanned out, but GPUs usually support
half-float formats with 1, 2, or possibly 3 components, and it is useful
to be able to import/export them with a valid fourcc, and/or use gbm to
create them.
These correspond to PIPE_FORMAT_{R16,R16G16,R16G16B16}_FLOAT in mesa.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Acked-by: Simona Vetter <simona@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Link: https://lore.kernel.org/r/20250625173712.116446-2-robin.clark@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add an operation to populate a part of a drm_mm with device
private memory. Clarify how migration using it is intended
to work.
v3:
- Kerneldoc fixes and updates (Matt Brost).
v4:
- More kerneldoc fixes. Rebase.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250619134035.170086-3-thomas.hellstrom@linux.intel.com
The migration functionality and track-keeping of per-pagemap VRAM
mapped to the CPU mm is not per GPU_vm, but rather per pagemap.
This is also reflected by the functions not needing the drm_gpusvm
structures. So move to drm_pagemap.
With this, drm_gpusvm shouldn't really access the page zone-device-data
since its meaning is internal to drm_pagemap. Currently it's used to
reject mapping ranges backed by multiple drm_pagemap allocations.
For now, make the zone-device-data a void pointer.
Alter the interface of drm_gpusvm_migrate_to_devmem() to ensure we don't
pass a gpusvm pointer.
Rename CONFIG_DRM_XE_DEVMEM_MIRROR to CONFIG_DRM_XE_PAGEMAP.
Matt is listed as author of this commit since he wrote most of the code,
and it makes sense to retain his git authorship.
Thomas mostly moved the code around.
v3:
- Kerneldoc fixes (CI)
- Don't update documentation about how the drm_pagemap
migration should be interpreted until upcoming
patches where the functionality is implemented.
(Matt Brost)
v4:
- More kerneldoc fixes around timeslice_ms
(Himal Ghimiray, Matt Brost)
v6:
- Fix an uninitialized pagemap pointer (CI)
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250619134035.170086-2-thomas.hellstrom@linux.intel.com
To avoid duplicating the tricky bo locking implementation,
Implement ttm_lru_walk_for_evict() using the guarded bo LRU iteration.
To facilitate this, support ticketlocking from the guarded bo LRU
iteration.
v2:
- Clean up some static function interfaces (Christian König)
- Fix Handling -EALREADY from ticketlocking in the loop by
skipping to the next item. (Intel CI)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250623155313.4901-4-thomas.hellstrom@linux.intel.com
Instead of the struct ttm_operation_ctx, Pass a struct ttm_lru_walk_arg
to enable us to easily extend the walk functionality, and to
implement ttm_lru_walk_for_evict() using the guarded LRU iteration.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250623155313.4901-3-thomas.hellstrom@linux.intel.com
Let the locking functions take the new struct ttm_lru_walk_arg
as argument in order for them to be easily used from both
types of walk.
v2:
- Whitespace fix
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250623155313.4901-2-thomas.hellstrom@linux.intel.com
Commit 37d078e51b ("drm/xe/uapi: Split xe_sync types from flags") renamed some DRM_XE_SYNC_*
defines but later commits kept using the old names. Correct them with the new definition.
v2: correct fixes tag and update commit message to explain why (Lucas)
Fixes: 9329f06672 ("drm/xe/uapi: Use LR abbrev for long-running vms")
Fixes: 4b437893a8 ("drm/xe/uapi: More uAPI documentation additions and cosmetic updates")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Zongyao Bai <zongyao.bai@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250608230133.1250849-1-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Information parsed from the display EDID should be stored in display
info. Move HDR sink metadata there.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250519112900.1383997-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Erase command is slow on discrete graphics storage
and may overshot PCI completion timeout.
BMG introduces the ability to have non-posted erase.
Add driver support for non-posted erase with polling
for erase completion.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Reuven Abliyev <reuven.abliyev@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250617145159.3803852-9-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
