Commit graph

1,264,532 commits

Author SHA1 Message Date
Walter Broemeling
e1839f78e4 arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees
Samsung Galaxy Core Prime and Grand Prime are phones based on MSM8916.
They are similar to the other Samsung devices based on MSM8916 with only a
few minor differences.

This initial commit adds support for:
 - fortuna3g (SM-G530H)
 - gprimeltecan (SM-G530W)
 - grandprimelte (SM-G530FZ)
 - rossa (SM-G360G)

The device trees contain initial support with:
 - GPIO keys
 - Regulator haptic
 - SDHCI (internal and external storage)
 - USB Device Mode
 - UART (on USB connector via the SM5502/SM5504 MUIC)
 - WCNSS (WiFi/BT)
 - Regulators
 - QDSP6 audio
 - Speaker/earpiece/headphones/microphones via digital/analog codec in
   MSM8916/PM8916
 - WWAN Internet via BAM-DMUX

There are different variants of Core Prime and Grand Prime, with some
differences in accelerometer, NFC and panel.
Core Prime and Grand Prime are similar, with some differences in MUIC,
panel and touchscreen.

The common parts are shared in
msm8916-samsung-fortuna-common.dtsi and msm8916-samsung-rossa-common.dtsi
to reduce duplication.

Signed-off-by: Walter Broemeling <wallebroem@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Joe: Add audio, buttons and WiFi]
Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
[Siddharth: Add fortuna3g]
Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com>
[Raymond: Add modem, fortuna-common.dtsi, grandprimelte and rossa]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240129143147.5058-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14 09:41:27 -06:00
Konrad Dybcio
2f7be4caac arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
Now that the non-legacy form of OPP is supported within the UFS driver,
go ahead and switch to it, adding support for more intermediate freq/power
states.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240203-topic-8550_ufs_oppv2-v2-1-b0bef2a73e6c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14 09:41:27 -06:00
Krzysztof Kozlowski
1587bb53c1 arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts
Each group of MSI interrupts is mapped to the separate host interrupt.
Describe each of interrupts in the device tree for PCIe hosts.  This
also corrects PCIe1 and PCIe2 first MSI interrupt.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240205163123.81842-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14 09:41:27 -06:00
Krzysztof Kozlowski
77e7257a60 arm64: dts: qcom: minor whitespace cleanup
The DTS code coding style expects exactly one space before '{' and
around '=' characters.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240208105208.128706-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14 09:41:27 -06:00
Krzysztof Kozlowski
1fe82781df arm64: dts: qcom: ssm7125-xiaomi: drop incorrect UFS phy max current
Neither bindings nor UFS phy driver use properties like
'vdda-phy-max-microamp' and 'vdda-pll-max-microamp':

  sm7125-xiaomi-curtana.dtb: phy@1d87000: 'vdda-phy-max-microamp', 'vdda-pll-max-microamp' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212150558.81896-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14 09:41:27 -06:00
Krzysztof Kozlowski
4442a67eed arm64: dts: qcom: x1e80100-crd: add sound card
Add sound card to X1E80100-CRD board and update DMIC supply.  Works so
far:
 - Audio playback via speakers or audio jack headset,
 - DMIC0-3 recording.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212184403.246299-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14 09:41:27 -06:00
Krzysztof Kozlowski
8794916799 arm64: dts: x1e80100: correct DMIC2 and DMIC3 pin config node names
Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14 09:41:20 -06:00
Krzysztof Kozlowski
94c3127671 arm64: dts: sm8650: correct DMIC2 and DMIC3 pin config node names
Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14 09:41:20 -06:00
Krzysztof Kozlowski
c6e5bf9278 arm64: dts: sm8550: correct DMIC2 and DMIC3 pin config node names
Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14 09:41:19 -06:00
Krzysztof Kozlowski
0d3eb7ff1f arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names
Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14 09:41:19 -06:00
Krzysztof Kozlowski
61474b18e7 arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names
Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14 09:41:19 -06:00
Arnd Bergmann
e20f378d99 nvmem: include bit index in cell sysfs file name
Creating sysfs files for all Cells caused a boot failure for linux-6.8-rc1 on
Apple M1, which (in downstream dts files) has multiple nvmem cells that use the
same byte address. This causes the device probe to fail with

[    0.605336] sysfs: cannot create duplicate filename '/devices/platform/soc@200000000/2922bc000.efuse/apple_efuses_nvmem0/cells/efuse@a10'
[    0.605347] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S                 6.8.0-rc1-arnd-5+ #133
[    0.605355] Hardware name: Apple Mac Studio (M1 Ultra, 2022) (DT)
[    0.605362] Call trace:
[    0.605365]  show_stack+0x18/0x2c
[    0.605374]  dump_stack_lvl+0x60/0x80
[    0.605383]  dump_stack+0x18/0x24
[    0.605388]  sysfs_warn_dup+0x64/0x80
[    0.605395]  sysfs_add_bin_file_mode_ns+0xb0/0xd4
[    0.605402]  internal_create_group+0x268/0x404
[    0.605409]  sysfs_create_groups+0x38/0x94
[    0.605415]  devm_device_add_groups+0x50/0x94
[    0.605572]  nvmem_populate_sysfs_cells+0x180/0x1b0
[    0.605682]  nvmem_register+0x38c/0x470
[    0.605789]  devm_nvmem_register+0x1c/0x6c
[    0.605895]  apple_efuses_probe+0xe4/0x120
[    0.606000]  platform_probe+0xa8/0xd0

As far as I can tell, this is a problem for any device with multiple cells on
different bits of the same address. Avoid the issue by changing the file name
to include the first bit number.

Fixes: 0331c61194 ("nvmem: core: Expose cells through sysfs")
Link: bd0a1a7d4/arch/arm64/boot/dts/apple/t600x-dieX.dtsi (L156)
Cc:  <regressions@lists.linux.dev>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Rafał Miłecki <rafal@milecki.pl>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc:  <asahi@lists.linux.dev>
Cc: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240209163454.98051-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-14 16:28:16 +01:00
Alexander Gordeev
7b2411e793 KVM: s390: fix virtual vs physical address confusion
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.

Suggested-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2024-02-14 16:25:29 +01:00
Tvrtko Ursulin
b112364867 drm/i915: Add GuC submission interface version query
Add a new query to the GuC submission interface version.

Mesa intends to use this information to check for old firmware versions
with a known bug where using the render and compute command streamers
simultaneously can cause GPU hangs due issues in firmware scheduling.

Based on patches from Vivaik and Joonas.

Compile tested only.

v2:
 * Added branch version.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208082510.1363268-1-tvrtko.ursulin@linux.intel.com
2024-02-14 07:22:50 -08:00
Greg Kroah-Hartman
23d62fb5d3 IIO: 1st set of fixes for the 6.8 cycle
Usual mixed bag of issues introduced this cycle and fixes for long term
 issues that have been identified recently + one case where I messed up
 a merge resolution and dropped the build file changes.
 
 Most important is the userspace ABI fix for the iio_modifier enum
 where we accidentally added new entries in the middle rather than at
 the end.
 
 IIO Core
  - Close a memory leak in an error path.
  - Move LIGHT_UVA and LIGHT_UVB definitions to end of the iio_modifier
    enum to avoid breaking older userspace. (not yet in a released kernel
    thankfully).
 
 adi,adis
  - Fix a DMA buffer alignment issue that was missing in series that fixed
    these across IIO.
 
 adi,ad-sigma-delta
  - Fix a DMA buffer alignment issue that was missing in series that fixed
    these across IIO.
 
 adi,ad4130
  - Zero init remaining fields of clock init data.
  - Only set GPIO control bits on pins that aren't in use for anything else.
 
 adi,ad5933
  - Fix an old bug due to type mismatch. This is a rare device so good to
    get some new test coverage.
 
 adi,ad7091r
  - Use right variable for an error return code.
 
 bosch,bma400
  - Add missing CONFIG_REGMAP_I2C dependency.
 
 bosch,bmp280:
  - Add missing bmp085 ID to the SPI table to avoid mismatch with the
    of_device_id table.
 
 hid-sensors:
  - Avoid returning an error for timestamp read back that succeeds.
 
 pni,rm3100
  - Check value read from RM31000_REG_TMRC register is valid before using
    it. Hardening  to avoid a real world issue seen on some faulty hardware.
 
 st,st-sensors
  - Fix a DMA buffer alignment issue that was missing in series that fixed
    these across IIO.
 
 ti,hdc3020
  - Add missing Kconfig and Makefile entrees accidentally dropped when patches
    were applied.
  - Fix wrong temperature offset (negated)
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmXI+e4RHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FohgNg//VnWVGDquObS2aElYRSiV68MnNGsGlUto
 kbYkNT7TRdNPqtjUHOPajBwxmSM/oNPyUFJyreLJuYFj6MenR4Cdxr1ZOkGTAsx0
 zY89WMXkHiYHd7LSb3CNjm+xrvbDnPGq2iZTrSiHWLvbAgeYHFurRvRnqUJ9/o5E
 TxNl3Cn0IVJAs10uur21Rom9WTJYasmRNhMpQoyeWHtioqTHYrvFAb7/jIuYJGFW
 ctZqV5rY6LxxxlZQ3rNgR1aV6FAV4S8WX1Bx/Uc2xdlyYEpvVn4aFDZ0GTyQSHN8
 6x9k1nNqvL5bCRCJTPW4oa+TUYYOmJkJGfFgP3bXVsHyebBN9v/2sAePMaitIi3c
 xdcM41dUJY7wz7/dV2KAO9bXcA9MCHq5FjtuLFuf8IrcRePohogu+wui3HANdjDJ
 fDX4vmtPtdoW5mhKbnnc10HVkQ40xyM9+Wpe5mU2DYQ9LKE9syMI65SfVhQ8xUcN
 SMt1HhBSA7EmVQSkLWVKeOPfLAy2M3zDeQK987n7b1yGHDmc/L/hf0vw8MGNK1m3
 vGdrpsD3K6affVOSOgyt9PNREWPMYjvz2O+qVFfvvPcTOtEh1szJN3OkxO0SgFkT
 Tsf+aoH5UUFw+/Qf8Abh3vpf3hg+bWRoIBmMsduw//8yFnuU6DQZeNMbhFxW1frc
 Jb0u+590MiU=
 =Y9n7
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-6.8a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus

Jonathan writes:

IIO: 1st set of fixes for the 6.8 cycle

Usual mixed bag of issues introduced this cycle and fixes for long term
issues that have been identified recently + one case where I messed up
a merge resolution and dropped the build file changes.

Most important is the userspace ABI fix for the iio_modifier enum
where we accidentally added new entries in the middle rather than at
the end.

IIO Core
 - Close a memory leak in an error path.
 - Move LIGHT_UVA and LIGHT_UVB definitions to end of the iio_modifier
   enum to avoid breaking older userspace. (not yet in a released kernel
   thankfully).

adi,adis
 - Fix a DMA buffer alignment issue that was missing in series that fixed
   these across IIO.

adi,ad-sigma-delta
 - Fix a DMA buffer alignment issue that was missing in series that fixed
   these across IIO.

adi,ad4130
 - Zero init remaining fields of clock init data.
 - Only set GPIO control bits on pins that aren't in use for anything else.

adi,ad5933
 - Fix an old bug due to type mismatch. This is a rare device so good to
   get some new test coverage.

adi,ad7091r
 - Use right variable for an error return code.

bosch,bma400
 - Add missing CONFIG_REGMAP_I2C dependency.

bosch,bmp280:
 - Add missing bmp085 ID to the SPI table to avoid mismatch with the
   of_device_id table.

hid-sensors:
 - Avoid returning an error for timestamp read back that succeeds.

pni,rm3100
 - Check value read from RM31000_REG_TMRC register is valid before using
   it. Hardening  to avoid a real world issue seen on some faulty hardware.

st,st-sensors
 - Fix a DMA buffer alignment issue that was missing in series that fixed
   these across IIO.

ti,hdc3020
 - Add missing Kconfig and Makefile entrees accidentally dropped when patches
   were applied.
 - Fix wrong temperature offset (negated)

* tag 'iio-fixes-for-6.8a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: adc: ad4130: only set GPIO_CTRL if pin is unused
  iio: adc: ad4130: zero-initialize clock init data
  iio: accel: bma400: Fix a compilation problem
  iio: commom: st_sensors: ensure proper DMA alignment
  iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
  iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
  staging: iio: ad5933: fix type mismatch regression
  iio: humidity: hdc3020: fix temperature offset
  iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
  iio: adc: ad_sigma_delta: ensure proper DMA alignment
  iio: imu: adis: ensure proper DMA alignment
  iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
  iio: imu: bno055: serdev requires REGMAP
  iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
  iio: pressure: bmp280: Add missing bmp085 to SPI id table
  iio: core: fix memleak in iio_device_register_sysfs
2024-02-14 16:19:17 +01:00
Dmitry Baryshkov
aa1267e673 drm: ci: use clk_ignore_unused for apq8016
If the ADV7511 bridge driver is compiled as a module, while DRM_MSM is
built-in, the clk_disable_unused congests with the runtime PM handling
of the DSI PHY for the clk_prepare_lock(). This causes apq8016 runner to
fail without completing any jobs ([1]). Drop the BM_CMDLINE which
duplicate the command line from the .baremetal-igt-arm64 clause and
enforce the clk_ignore_unused kernelarg instead to make apq8016 runner
work.

[1] https://gitlab.freedesktop.org/drm/msm/-/jobs/54990475

Fixes: 0119c894ab ("drm: Add initial ci/ subdirectory")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214083708.2323967-1-dmitry.baryshkov@linaro.org
2024-02-14 11:23:56 -03:00
Matthew Auld
a64056bb5a drm/tests/drm_buddy: add alloc_contiguous test
Sanity check DRM_BUDDY_CONTIGUOUS_ALLOCATION.

v2: Fix checkpatch warnings.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214131853.5934-2-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
2024-02-14 15:22:21 +01:00
Arunpravin Paneer Selvam
8746c6c9df drm/buddy: Fix alloc_range() error handling code
Few users have observed display corruption when they boot
the machine to KDE Plasma or playing games. We have root
caused the problem that whenever alloc_range() couldn't
find the required memory blocks the function was returning
SUCCESS in some of the corner cases.

The right approach would be if the total allocated size
is less than the required size, the function should
return -ENOSPC.

Cc: <stable@vger.kernel.org> # 6.7+
Fixes: 0a1844bf0b ("drm/buddy: Improve contiguous memory allocation")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3097
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240207174456.341121-1-Arunpravin.PaneerSelvam@amd.com/
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214131853.5934-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
2024-02-14 15:22:05 +01:00
Dan Carpenter
98f681b0f8
ASoC: SOF: Add some bounds checking to firmware data
Smatch complains about "head->full_size - head->header_size" can
underflow.  To some extent, we're always going to have to trust the
firmware a bit.  However, it's easy enough to add a check for negatives,
and let's add a upper bounds check as well.

Fixes: d2458baa79 ("ASoC: SOF: ipc3-loader: Implement firmware parsing and loading")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/r/5593d147-058c-4de3-a6f5-540ecb96f6f8@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-14 13:22:24 +00:00
Ricardo B. Marliere
14ce0dbb56 powerpc: ibmebus: make ibmebus_bus_type const
Since commit d492cc2573 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the ibmebus_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240212-bus_cleanup-powerpc2-v2-5-8441b3f77827@marliere.net
2024-02-15 00:14:06 +11:00
Ricardo B. Marliere
112202f34e powerpc: pmac: make macio_bus_type const
Since commit d492cc2573 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the macio_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240212-bus_cleanup-powerpc2-v2-4-8441b3f77827@marliere.net
2024-02-15 00:14:06 +11:00
Ricardo B. Marliere
8e3d0b8d99 powerpc: mpic: make mpic_subsys const
Since commit d492cc2573 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the mpic_subsys variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240212-bus_cleanup-powerpc2-v2-3-8441b3f77827@marliere.net
2024-02-15 00:14:06 +11:00
Ricardo B. Marliere
565206aaa6 powerpc: vio: make vio_bus_type const
Since commit d492cc2573 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the vio_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240212-bus_cleanup-powerpc2-v2-2-8441b3f77827@marliere.net
2024-02-15 00:14:06 +11:00
Ricardo B. Marliere
e15d01277a powerpc: vio: move device attributes into a new ifdef
In order to make the distinction of the vio_bus_type variable based on
CONFIG_PPC_SMLPAR more explicit, move the required structs into a new
ifdef block. This is needed in order to make vio_bus_type const and
because the distinction is made explicit, there is no need to set the
fields within the vio_cmo_sysfs_init function.

Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240212-bus_cleanup-powerpc2-v2-1-8441b3f77827@marliere.net
2024-02-15 00:14:05 +11:00
Christophe Leroy
c5aebb53b3 powerpc: Force inlining of arch_vmap_p{u/m}d_supported()
arch_vmap_pud_supported() and arch_vmap_pmd_supported() are
expected to constant-fold to false when RADIX is not enabled.

Force inlining in order to avoid following failure which
leads to unexpected call of non-existing pud_set_huge() and
pmd_set_huge() on powerpc 8xx.

In function 'pud_huge_tests',
    inlined from 'debug_vm_pgtable' at mm/debug_vm_pgtable.c:1399:2:
./arch/powerpc/include/asm/vmalloc.h:9:33: warning: inlining failed in call to 'arch_vmap_pud_supported.isra': call is unlikely and code size would grow [-Winline]
    9 | #define arch_vmap_pud_supported arch_vmap_pud_supported
      |                                 ^~~~~~~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/vmalloc.h:10:20: note: in expansion of macro 'arch_vmap_pud_supported'
   10 | static inline bool arch_vmap_pud_supported(pgprot_t prot)
      |                    ^~~~~~~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/vmalloc.h:9:33: note: called from here
    9 | #define arch_vmap_pud_supported arch_vmap_pud_supported
mm/debug_vm_pgtable.c:458:14: note: in expansion of macro 'arch_vmap_pud_supported'
  458 |         if (!arch_vmap_pud_supported(args->page_prot) ||
      |              ^~~~~~~~~~~~~~~~~~~~~~~

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402131836.OU1TDuoi-lkp@intel.com/
Fixes: 8309c9d717 ("powerpc: inline huge vmap supported functions")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/bbd84ad52bf377e8d3b5865a906f2dc5d99964ba.1707832677.git.christophe.leroy@csgroup.eu
2024-02-15 00:14:05 +11:00
Michael Ellerman
0875f1ceba powerpc/smp: Remap boot CPU onto core 0 if >= nr_cpu_ids
If nr_cpu_ids is too low to include the boot CPU, remap the boot CPU
onto logical core 0.

This is achieved in two stages. In early_init_dt_scan_cpus() the boot
CPU is renumbered to be on logical core 0, and the original boot core's
hardware ID is recorded.

Later in smp_setup_cpu_maps(), if the original boot core ID is set, the
logical CPU numbers on the 0th core are skipped in the normal device
tree search over CPU device tree nodes. Then the search is continued
until the device tree node matching the boot core is found, and those
CPUs are assigned the CPU numbers starting at 0.

This allows kdump kernels to be booted with low values for nr_cpu_ids
to conserve memory, while also allowing the crashing/boot CPU to be
any CPU.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Wen Xiong <wenxiong@us.ibm.com>
Link: https://msgid.link/20231229120107.2281153-5-mpe@ellerman.id.au
2024-02-15 00:14:05 +11:00
Michael Ellerman
9832de6544 powerpc/smp: Factor out assign_threads()
Factor out the for loop that assigns CPU numbers to threads of a core.
The function takes the next CPU number to use as input, and returns the
next available CPU number after the threads has been assigned.

This will allow a subsequent change to assign threads out of order.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231229120107.2281153-4-mpe@ellerman.id.au
2024-02-15 00:14:05 +11:00
Michael Ellerman
dca79603fb powerpc/smp: Lookup avail once per device tree node
The of_device_is_available() check only needs to be done once per device
node, there's no need to repeat it for each thread. Move it out of the
loop.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231229120107.2281153-3-mpe@ellerman.id.au
2024-02-15 00:14:04 +11:00
Michael Ellerman
777f81f0a9 powerpc/smp: Increase nr_cpu_ids to include the boot CPU
If nr_cpu_ids is too low to include the boot CPU adjust nr_cpu_ids
upward. Otherwise the kernel will BUG when trying to allocate a paca
for the boot CPU and fail to boot.

Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231229120107.2281153-2-mpe@ellerman.id.au
2024-02-15 00:14:04 +11:00
Michael Ellerman
5580e96dad powerpc/smp: Adjust nr_cpu_ids to cover all threads of a core
If nr_cpu_ids is too low to include at least all the threads of a single
core adjust nr_cpu_ids upwards. This avoids triggering odd bugs in code
that assumes all threads of a core are available.

Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231229120107.2281153-1-mpe@ellerman.id.au
2024-02-15 00:14:04 +11:00
Shivaprasad G Bhat
0846dd77c8 powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach
The function spapr_tce_platform_iommu_attach_dev() is missing to call
iommu_group_put() when the domain is already set. This refcount leak
shows up with BUG_ON() during DLPAR remove operation as:

  KernelBug: Kernel bug in state 'None': kernel BUG at arch/powerpc/platforms/pseries/iommu.c:100!
  Oops: Exception in kernel mode, sig: 5 [#1]
  LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=8192 NUMA pSeries
  <snip>
  Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_016) hv:phyp pSeries
  NIP:  c0000000000ff4d4 LR: c0000000000ff4cc CTR: 0000000000000000
  REGS: c0000013aed5f840 TRAP: 0700   Tainted: G          I         (6.8.0-rc3-autotest-g99bd3cb0d12e)
  MSR:  8000000000029033 <SF,EE,ME,IR,DR,RI,LE>  CR: 44002402  XER: 20040000
  CFAR: c000000000a0d170 IRQMASK: 0
  ...
  NIP iommu_reconfig_notifier+0x94/0x200
  LR  iommu_reconfig_notifier+0x8c/0x200
  Call Trace:
    iommu_reconfig_notifier+0x8c/0x200 (unreliable)
    notifier_call_chain+0xb8/0x19c
    blocking_notifier_call_chain+0x64/0x98
    of_reconfig_notify+0x44/0xdc
    of_detach_node+0x78/0xb0
    ofdt_write.part.0+0x86c/0xbb8
    proc_reg_write+0xf4/0x150
    vfs_write+0xf8/0x488
    ksys_write+0x84/0x140
    system_call_exception+0x138/0x330
    system_call_vectored_common+0x15c/0x2ec

The patch adds the missing iommu_group_put() call.

Fixes: a8ca9fc913 ("powerpc/iommu: Do not do platform domain attach atctions after probe")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Closes: https://lore.kernel.org/all/274e0d2b-b5cc-475e-94e6-8427e88e271d@linux.vnet.ibm.com/
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/170784021983.6249.10039296655906636112.stgit@linux.ibm.com
2024-02-14 23:59:23 +11:00
Maxime Jayat
2aa0a5e65e can: netlink: Fix TDCO calculation using the old data bittiming
The TDCO calculation was done using the currently applied data bittiming,
instead of the newly computed data bittiming, which means that the TDCO
had an invalid value unless setting the same data bittiming twice.

Fixes: d99755f71a ("can: netlink: add interface for CAN-FD Transmitter Delay Compensation (TDC)")
Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/40579c18-63c0-43a4-8d4c-f3a6c1c0b417@munic.io
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-14 13:53:03 +01:00
Oleksij Rempel
efe7cf8280 can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...)
modifies jsk->filters while receiving packets.

Following trace was seen on affected system:
 ==================================================================
 BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
 Read of size 4 at addr ffff888012144014 by task j1939/350

 CPU: 0 PID: 350 Comm: j1939 Tainted: G        W  OE      6.5.0-rc5 #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
 Call Trace:
  print_report+0xd3/0x620
  ? kasan_complete_mode_report_info+0x7d/0x200
  ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
  kasan_report+0xc2/0x100
  ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
  __asan_load4+0x84/0xb0
  j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
  j1939_sk_recv+0x20b/0x320 [can_j1939]
  ? __kasan_check_write+0x18/0x20
  ? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939]
  ? j1939_simple_recv+0x69/0x280 [can_j1939]
  ? j1939_ac_recv+0x5e/0x310 [can_j1939]
  j1939_can_recv+0x43f/0x580 [can_j1939]
  ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939]
  ? raw_rcv+0x42/0x3c0 [can_raw]
  ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939]
  can_rcv_filter+0x11f/0x350 [can]
  can_receive+0x12f/0x190 [can]
  ? __pfx_can_rcv+0x10/0x10 [can]
  can_rcv+0xdd/0x130 [can]
  ? __pfx_can_rcv+0x10/0x10 [can]
  __netif_receive_skb_one_core+0x13d/0x150
  ? __pfx___netif_receive_skb_one_core+0x10/0x10
  ? __kasan_check_write+0x18/0x20
  ? _raw_spin_lock_irq+0x8c/0xe0
  __netif_receive_skb+0x23/0xb0
  process_backlog+0x107/0x260
  __napi_poll+0x69/0x310
  net_rx_action+0x2a1/0x580
  ? __pfx_net_rx_action+0x10/0x10
  ? __pfx__raw_spin_lock+0x10/0x10
  ? handle_irq_event+0x7d/0xa0
  __do_softirq+0xf3/0x3f8
  do_softirq+0x53/0x80
  </IRQ>
  <TASK>
  __local_bh_enable_ip+0x6e/0x70
  netif_rx+0x16b/0x180
  can_send+0x32b/0x520 [can]
  ? __pfx_can_send+0x10/0x10 [can]
  ? __check_object_size+0x299/0x410
  raw_sendmsg+0x572/0x6d0 [can_raw]
  ? __pfx_raw_sendmsg+0x10/0x10 [can_raw]
  ? apparmor_socket_sendmsg+0x2f/0x40
  ? __pfx_raw_sendmsg+0x10/0x10 [can_raw]
  sock_sendmsg+0xef/0x100
  sock_write_iter+0x162/0x220
  ? __pfx_sock_write_iter+0x10/0x10
  ? __rtnl_unlock+0x47/0x80
  ? security_file_permission+0x54/0x320
  vfs_write+0x6ba/0x750
  ? __pfx_vfs_write+0x10/0x10
  ? __fget_light+0x1ca/0x1f0
  ? __rcu_read_unlock+0x5b/0x280
  ksys_write+0x143/0x170
  ? __pfx_ksys_write+0x10/0x10
  ? __kasan_check_read+0x15/0x20
  ? fpregs_assert_state_consistent+0x62/0x70
  __x64_sys_write+0x47/0x60
  do_syscall_64+0x60/0x90
  ? do_syscall_64+0x6d/0x90
  ? irqentry_exit+0x3f/0x50
  ? exc_page_fault+0x79/0xf0
  entry_SYSCALL_64_after_hwframe+0x6e/0xd8

 Allocated by task 348:
  kasan_save_stack+0x2a/0x50
  kasan_set_track+0x29/0x40
  kasan_save_alloc_info+0x1f/0x30
  __kasan_kmalloc+0xb5/0xc0
  __kmalloc_node_track_caller+0x67/0x160
  j1939_sk_setsockopt+0x284/0x450 [can_j1939]
  __sys_setsockopt+0x15c/0x2f0
  __x64_sys_setsockopt+0x6b/0x80
  do_syscall_64+0x60/0x90
  entry_SYSCALL_64_after_hwframe+0x6e/0xd8

 Freed by task 349:
  kasan_save_stack+0x2a/0x50
  kasan_set_track+0x29/0x40
  kasan_save_free_info+0x2f/0x50
  __kasan_slab_free+0x12e/0x1c0
  __kmem_cache_free+0x1b9/0x380
  kfree+0x7a/0x120
  j1939_sk_setsockopt+0x3b2/0x450 [can_j1939]
  __sys_setsockopt+0x15c/0x2f0
  __x64_sys_setsockopt+0x6b/0x80
  do_syscall_64+0x60/0x90
  entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Reported-by: Sili Luo <rootlab@huawei.com>
Suggested-by: Sili Luo <rootlab@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20231020133814.383996-1-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-14 13:53:03 +01:00
Ziqi Zhao
6cdedc18ba can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
The following 3 locks would race against each other, causing the
deadlock situation in the Syzbot bug report:

- j1939_socks_lock
- active_session_list_lock
- sk_session_queue_lock

A reasonable fix is to change j1939_socks_lock to an rwlock, since in
the rare situations where a write lock is required for the linked list
that j1939_socks_lock is protecting, the code does not attempt to
acquire any more locks. This would break the circular lock dependency,
where, for example, the current thread already locks j1939_socks_lock
and attempts to acquire sk_session_queue_lock, and at the same time,
another thread attempts to acquire j1939_socks_lock while holding
sk_session_queue_lock.

NOTE: This patch along does not fix the unregister_netdevice bug
reported by Syzbot; instead, it solves a deadlock situation to prepare
for one or more further patches to actually fix the Syzbot bug, which
appears to be a reference counting problem within the j1939 codebase.

Reported-by: <syzbot+1591462f226d9cbf0564@syzkaller.appspotmail.com>
Signed-off-by: Ziqi Zhao <astrajoan@yahoo.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20230721162226.8639-1-astrajoan@yahoo.com
[mkl: remove unrelated newline change]
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-14 13:53:03 +01:00
Heiko Carstens
616c4ea9bc s390/vdso: remove unused ENTRY in linker scripts
When linking vdso64.so.dbg with ld.lld, there is a warning about not
finding _start for the starting address:

  ld.lld: warning: cannot find entry symbol _start; not setting start address

Fix this by removing the unused ENTRY in both vdso linker scripts. See
commit e247172854 ("powerpc/vdso: Remove unused ENTRY in linker
scripts"), which solved the same problem for powerpc, for further details.

Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:53 +01:00
Arnd Bergmann
9b23fceb41 ethernet: cpts: fix function pointer cast warnings
clang-16 warns about the mismatched prototypes for the devm_* callbacks:

drivers/net/ethernet/ti/cpts.c:691:12: error: cast from 'void (*)(struct clk_hw *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  691 |                                        (void(*)(void *))clk_hw_unregister_mux,
      |                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device.h:406:34: note: expanded from macro 'devm_add_action_or_reset'
  406 |         __devm_add_action_or_reset(dev, action, data, #action)
      |                                         ^~~~~~
drivers/net/ethernet/ti/cpts.c:703:12: error: cast from 'void (*)(struct device_node *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  703 |                                        (void(*)(void *))of_clk_del_provider,
      |                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device.h:406:34: note: expanded from macro 'devm_add_action_or_reset'
  406 |         __devm_add_action_or_reset(dev, action, data, #action)

Use separate helper functions for this instead, using the expected prototypes
with a void* argument.

Fixes: a3047a81ba ("net: ethernet: ti: cpts: add support for ext rftclk selection")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 12:50:53 +00:00
Heiko Carstens
3938490e78 s390/bug: remove entry size from __bug_table section
Commit e21f8baf8d ("s390/bug: add entry size to the __bug_table section")
changed the __EMIT_BUG() inline assembly to emit mergeable __bug_table
entries. This is at least currently not needed, but causes problems with
the upcoming s390 ld.lld support:

  ld.lld: error: drivers/nvme/host/fc.o:(__bug_table): writable SHF_MERGE section is not supported

Therefore revert the change for now.

Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20240207-s390-lld-and-orphan-warn-v1-0-8a665b3346ab@kernel.org/
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:53 +01:00
Nathan Chancellor
55cce52f1c s390: link vmlinux with '-z notext'
ld.bfd defaults to '-z notext' (although it is customizable with the
'--enable-textrel-check' configure option) but ld.lld defaults to '-z
text', which causes issues with building the kernel due to the presence
of dynamic relocations in sections that are not writable.

  ld.lld: error: relocation R_390_64 cannot be used against local symbol; recompile with -fPIC

Add '-z notext' to avoid these errors, as this is expected, which
matches other architectures.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-11-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:53 +01:00
Nathan Chancellor
acb7c202ba s390: select CONFIG_ARCH_WANT_LD_ORPHAN_WARN
Now that all sections have been properly accounted for in the s390
linker scripts, select CONFIG_ARCH_WANT_LD_ORPHAN_WARN so that
'--orphan-handling' is added to LDFLAGS to catch any future sections
that are added without being described in linker scripts.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-10-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:53 +01:00
Nathan Chancellor
c0f98ea0e7 s390/boot: vmlinux.lds.S: handle commonly discarded sections
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are several series of warnings
from the various discardable sections that the kernel adds for build
purposes that are not needed at runtime:

  s390-linux-ld: warning: orphan section `.export_symbol' from `arch/s390/boot/decompressor.o' being placed in section `.export_symbol'
  s390-linux-ld: warning: orphan section `.discard.addressable' from `arch/s390/boot/decompressor.o' being placed in section `.discard.addressable'
  s390-linux-ld: warning: orphan section `.modinfo' from `arch/s390/boot/decompressor.o' being placed in section `.modinfo'

include/asm-generic/vmlinux.lds.h has a macro for easily discarding
these sections across the kernel named COMMON_DISCARDS, use it to clear
up the warnings.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-9-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:53 +01:00
Nathan Chancellor
6a4d37c886 s390/boot: vmlinux.lds.S: handle ELF required sections
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there is a warning around the '.comment'
section for each file in arch/s390/boot

  s390-linux-ld: warning: orphan section `.comment' from `arch/s390/boot/als.o' being placed in section `.comment'
  s390-linux-ld: warning: orphan section `.comment' from `arch/s390/boot/startup.o' being placed in section `.comment'
  s390-linux-ld: warning: orphan section `.comment' from `arch/s390/boot/physmem_info.o' being placed in section `.comment'

include/asm-generic/vmlinux.lds.h has a macro for required ELF sections
not related to debugging named ELF_DETAILS, use it to clear up the
warnings.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-8-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:53 +01:00
Nathan Chancellor
ba6c26af1e s390/boot: vmlinux.lds.S: handle DWARF debug sections
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are several series of warnings for
each file in arch/s390/boot due to the boot linker script not handling
the DWARF debug sections:

  s390-linux-ld: warning: orphan section `.debug_line' from `arch/s390/boot/head.o' being placed in section `.debug_line'
  s390-linux-ld: warning: orphan section `.debug_info' from `arch/s390/boot/head.o' being placed in section `.debug_info'
  s390-linux-ld: warning: orphan section `.debug_abbrev' from `arch/s390/boot/head.o' being placed in section `.debug_abbrev'
  s390-linux-ld: warning: orphan section `.debug_aranges' from `arch/s390/boot/head.o' being placed in section `.debug_aranges'
  s390-linux-ld: warning: orphan section `.debug_str' from `arch/s390/boot/head.o' being placed in section `.debug_str'

include/asm-generic/vmlinux.lds.h has a macro for DWARF debug sections
named DWARF_DEBUG, use it to clear up the warnings.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-7-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:52 +01:00
Nathan Chancellor
64d590a24f s390/boot: vmlinux.lds.S: handle '.rela' sections
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are several warnings from
arch/s390/boot/head.o due to the unhandled presence of '.rela' sections:

  s390-linux-ld: warning: orphan section `.rela.iplt' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
  s390-linux-ld: warning: orphan section `.rela.head.text' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
  s390-linux-ld: warning: orphan section `.rela.got' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
  s390-linux-ld: warning: orphan section `.rela.data' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
  s390-linux-ld: warning: orphan section `.rela.data.rel.ro' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
  s390-linux-ld: warning: orphan section `.rela.iplt' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
  s390-linux-ld: warning: orphan section `.rela.head.text' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
  s390-linux-ld: warning: orphan section `.rela.got' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
  s390-linux-ld: warning: orphan section `.rela.data' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
  s390-linux-ld: warning: orphan section `.rela.data.rel.ro' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'

These sections are unneeded for the decompressor and they are not
emitted in the binary currently. In a manner similar to other
architectures, coalesce the sections into '.rela.dyn' and ensure it is
zero sized, which is a safe/tested approach versus full discard.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-6-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:52 +01:00
Nathan Chancellor
b23ab303dd s390/boot: vmlinux.lds.S: handle '.init.text'
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there is a warning about the presence of
an '.init.text' section in arch/s390/boot:

  s390-linux-ld: warning: orphan section `.init.text' from `arch/s390/boot/sclp_early_core.o' being placed in section `.init.text'

arch/s390/boot/sclp_early_core.c includes a file from the main kernel
build, which picks up a usage of '__init' somewhere. For the
decompressed image, this section can just be coalesced into '.text'.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-5-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:52 +01:00
Nathan Chancellor
a691c8a6ef s390: vmlinux.lds.S: explicitly keep various sections
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are some warnings around certain
ELF sections:

  s390-linux-ld: warning: orphan section `.dynstr' from `arch/s390/kernel/head64.o' being placed in section `.dynstr'
  s390-linux-ld: warning: orphan section `.dynamic' from `arch/s390/kernel/head64.o' being placed in section `.dynamic'
  s390-linux-ld: warning: orphan section `.hash' from `arch/s390/kernel/head64.o' being placed in section `.hash'
  s390-linux-ld: warning: orphan section `.gnu.hash' from `arch/s390/kernel/head64.o' being placed in section `.gnu.hash'

Explicitly keep those sections like other architectures when
CONFIG_RELOCATABLE is enabled, which is always true for s390.

[hca@linux.ibm.com: keep sections instead of discarding]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-4-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:52 +01:00
Nathan Chancellor
30226853d6 s390: vmlinux.lds.S: explicitly handle '.got' and '.plt' sections
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are a lot of warnings around the
GOT and PLT sections:

  s390-linux-ld: warning: orphan section `.plt' from `arch/s390/kernel/head64.o' being placed in section `.plt'
  s390-linux-ld: warning: orphan section `.got' from `arch/s390/kernel/head64.o' being placed in section `.got'
  s390-linux-ld: warning: orphan section `.got.plt' from `arch/s390/kernel/head64.o' being placed in section `.got.plt'
  s390-linux-ld: warning: orphan section `.iplt' from `arch/s390/kernel/head64.o' being placed in section `.iplt'
  s390-linux-ld: warning: orphan section `.igot.plt' from `arch/s390/kernel/head64.o' being placed in section `.igot.plt'

  s390-linux-ld: warning: orphan section `.iplt' from `arch/s390/boot/head.o' being placed in section `.iplt'
  s390-linux-ld: warning: orphan section `.igot.plt' from `arch/s390/boot/head.o' being placed in section `.igot.plt'
  s390-linux-ld: warning: orphan section `.got' from `arch/s390/boot/head.o' being placed in section `.got'

Currently, only the '.got' section is actually emitted in the final
binary. In a manner similar to other architectures, put the '.got'
section near the '.data' section and coalesce the PLT sections,
checking that the final section is zero sized, which is a safe/tested
approach versus full discard.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-3-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:52 +01:00
Nathan Chancellor
bdf2cd27a3 s390: vmlinux.lds.S: handle '.data.rel' sections explicitly
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are a lot of warnings around
'.data.rel' sections:

  s390-linux-ld: warning: orphan section `.data.rel' from `kernel/sched/build_utility.o' being placed in section `.data.rel'
  s390-linux-ld: warning: orphan section `.data.rel.local' from `kernel/sched/build_utility.o' being placed in section `.data.rel.local'
  s390-linux-ld: warning: orphan section `.data.rel.ro' from `kernel/sched/build_utility.o' being placed in section `.data.rel.ro'
  s390-linux-ld: warning: orphan section `.data.rel.ro.local' from `kernel/sched/build_utility.o' being placed in section `.data.rel.ro.local'

Describe these in vmlinux.lds.S so there is no more warning and the
sections are placed consistently between linkers.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-2-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:52 +01:00
Nathan Chancellor
2151fd9a6d s390/boot: add support for CONFIG_LD_ORPHAN_WARN
arch/s390/boot/vmlinux uses a different linker script and build rules
than the main vmlinux, so the '--orphan-handling' flag is not applied to
it. Add support for '--orphan-handling' so that all sections are
properly described in the linker script, which helps eliminate bugs
between linker implementations having different orphan section
heuristics.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-1-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-14 13:50:52 +01:00
Arnd Bergmann
5d07e432cb bnad: fix work_queue type mismatch
clang-16 warns about a function pointer cast:

drivers/net/ethernet/brocade/bna/bnad.c:1995:4: error: cast from 'void (*)(struct delayed_work *)' to 'work_func_t' (aka 'void (*)(struct work_struct *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1995 |                         (work_func_t)bnad_tx_cleanup);
drivers/net/ethernet/brocade/bna/bnad.c:2252:4: error: cast from 'void (*)(void *)' to 'work_func_t' (aka 'void (*)(struct work_struct *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 2252 |                         (work_func_t)(bnad_rx_cleanup));

The problem here is mixing up work_struct and delayed_work, which relies
the former being the first member of the latter.

Change the code to use consistent types here to address the warning and
make it more robust against workqueue interface changes.

Side note: the use of a delayed workqueue for cleaning up TX descriptors
is probably a bad idea since this introduces a noticeable delay. The
driver currently does not appear to use BQL, but if one wanted to add
that, this would have to be changed as well.

Fixes: 01b54b1451 ("bna: tx rx cleanup fix")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 12:49:47 +00:00
Marc Kleine-Budde
240335736b Merge patch series "can: tcan4x5x: support resume upon rx can frame"
Martin Hundebøll <martin@geanix.com> says:

This is the third iteration of the previous submitted patches [0] and
[1].

This revision replaces the "wake_source" function parameters to a flag
in the class device structure, and adds a patch to document the
"wakeup-source" device tree property.

Also, the previous revisions forgot to mention that the patches are
based on Markus' coalescing patches [2]. Those implements caching of
the enabled interrupts, which is handy when restoring the set of
interrupts in the resume path.

[0] https://lore.kernel.org/linux-can/20230912093807.1383720-1-martin@geanix.com
[1] https://lore.kernel.org/linux-can/20230919122841.3803289-1-martin@geanix.com
[2] https://lore.kernel.org/linux-can/20230929141304.3934380-1-msp@baylibre.com

Link: https://lore.kernel.org/all/20231113131452.214961-1-martin@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-14 13:44:50 +01:00