Commit graph

1,264,532 commits

Author SHA1 Message Date
John Ogness
5f72e52ba9 printk: ringbuffer: Do not skip non-finalized records with prb_next_seq()
Commit f244b4dc53 ("printk: ringbuffer: Improve
prb_next_seq() performance") introduced an optimization for
prb_next_seq() by using best-effort to track recently finalized
records. However, the order of finalization does not
necessarily match the order of the records. The optimization
changed prb_next_seq() to return inconsistent results, possibly
yielding sequence numbers that are not available to readers
because they are preceded by non-finalized records or they are
not yet visible to the reader CPU.

Rather than simply best-effort tracking recently finalized
records, force the committing writer to read records and
increment the last "contiguous block" of finalized records. In
order to do this, the sequence number instead of ID must be
stored because ID's cannot be directly compared.

A new memory barrier pair is introduced to guarantee that a
reader can always read the records up until the sequence number
returned by prb_next_seq() (unless the records have since
been overwritten in the ringbuffer).

This restores the original functionality of prb_next_seq()
while also keeping the optimization.

For 32bit systems, only the lower 32 bits of the sequence
number are stored. When reading the value, it is expanded to
the full 64bit sequence number using the 32bit seq macros,
which fold in the value returned by prb_first_seq().

Fixes: f244b4dc53 ("printk: ringbuffer: Improve prb_next_seq() performance")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240207134103.1357162-5-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
2024-02-07 17:23:18 +01:00
John Ogness
90ad525c2d printk: Use prb_first_seq() as base for 32bit seq macros
Note: This change only applies to 32bit architectures. On 64bit
      architectures the macros are NOPs.

Currently prb_next_seq() is used as the base for the 32bit seq
macros __u64seq_to_ulseq() and __ulseq_to_u64seq(). However, in
a follow-up commit, prb_next_seq() will need to make use of the
32bit seq macros.

Use prb_first_seq() as the base for the 32bit seq macros instead
because it is guaranteed to return 64bit sequence numbers without
relying on any 32bit seq macros.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240207134103.1357162-4-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
2024-02-07 17:23:18 +01:00
Sebastian Andrzej Siewior
418ec1961c printk: Adjust mapping for 32bit seq macros
Note: This change only applies to 32bit architectures. On 64bit
      architectures the macros are NOPs.

__ulseq_to_u64seq() computes the upper 32 bits of the passed
argument value (@ulseq). The upper bits are derived from a base
value (@rb_next_seq) in a way that assumes @ulseq represents a
64bit number that is less than or equal to @rb_next_seq.

Until now this mapping has been correct for all call sites. However,
in a follow-up commit, values of @ulseq will be passed in that are
higher than the base value. This requires a change to how the 32bit
value is mapped to a 64bit sequence number.

Rather than mapping @ulseq such that the base value is the end of a
32bit block, map @ulseq such that the base value is in the middle of
a 32bit block. This allows supporting 31 bits before and after the
base value, which is deemed acceptable for the console sequence
number during runtime.

Here is an example to illustrate the previous and new mappings.

For a base value (@rb_next_seq) of 2 2000 0000...

Before this change the range of possible return values was:

1 2000 0001 to 2 2000 0000

__ulseq_to_u64seq(1fff ffff) => 2 1fff ffff
__ulseq_to_u64seq(2000 0000) => 2 2000 0000
__ulseq_to_u64seq(2000 0001) => 1 2000 0001
__ulseq_to_u64seq(9fff ffff) => 1 9fff ffff
__ulseq_to_u64seq(a000 0000) => 1 a000 0000
__ulseq_to_u64seq(a000 0001) => 1 a000 0001

After this change the range of possible return values are:

1 a000 0001 to 2 a000 0000

__ulseq_to_u64seq(1fff ffff) => 2 1fff ffff
__ulseq_to_u64seq(2000 0000) => 2 2000 0000
__ulseq_to_u64seq(2000 0001) => 2 2000 0001
__ulseq_to_u64seq(9fff ffff) => 2 9fff ffff
__ulseq_to_u64seq(a000 0000) => 2 a000 0000
__ulseq_to_u64seq(a000 0001) => 1 a000 0001

[ john.ogness: Rewrite commit message. ]

Reported-by: Francesco Dolcini <francesco@dolcini.it>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240207134103.1357162-3-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
2024-02-07 17:23:17 +01:00
John Ogness
5b73e706f0 printk: nbcon: Relocate 32bit seq macros
The macros __seq_to_nbcon_seq() and __nbcon_seq_to_seq() are
used to provide support for atomic handling of sequence numbers
on 32bit systems. Until now this was only used by nbcon.c,
which is why they were located in nbcon.c and include nbcon in
the name.

In a follow-up commit this functionality is also needed by
printk_ringbuffer. Rather than duplicating the functionality,
relocate the macros to printk_ringbuffer.h.

Also, since the macros will be no longer nbcon-specific, rename
them to __u64seq_to_ulseq() and __ulseq_to_u64seq().

This does not result in any functional change.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240207134103.1357162-2-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
2024-02-07 17:23:17 +01:00
Peter Hilber
27f6a9c87a kvmclock: Unexport kvmclock clocksource
The KVM PTP driver now refers to the clocksource ID CSID_X86_KVM_CLK, not
to the clocksource itself any more. There are no remaining users of the
clocksource export.

Therefore, make the clocksource static again.

Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240201010453.2212371-9-peter.hilber@opensynergy.com
2024-02-07 17:05:21 +01:00
Peter Hilber
b152688c91 treewide: Remove system_counterval_t.cs, which is never read
The clocksource pointer in struct system_counterval_t is not evaluated any
more. Remove the code setting the member, and the member itself.

Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240201010453.2212371-8-peter.hilber@opensynergy.com
2024-02-07 17:05:21 +01:00
Peter Hilber
4b7f521229 timekeeping: Evaluate system_counterval_t.cs_id instead of .cs
Clocksource pointers can be problematic to obtain for drivers which are not
clocksource drivers themselves. In particular, the RFC virtio_rtc driver
[1] would require a new helper function to obtain a pointer to the ARM
Generic Timer clocksource. The ptp_kvm driver also required a similar
workaround.

Address this by evaluating the clocksource ID, rather than the clocksource
pointer, of struct system_counterval_t. By this, setting the clocksource
pointer becomes unneeded, and get_device_system_crosststamp() callers will
no longer need to supply clocksource pointers.

All relevant clocksource drivers provide the ID, so this change is not
changing the behaviour.

[1] https://lore.kernel.org/lkml/20231218073849.35294-1-peter.hilber@opensynergy.com/

Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240201010453.2212371-7-peter.hilber@opensynergy.com
2024-02-07 17:05:21 +01:00
Peter Hilber
9be3b2f057 ptp/kvm, arm_arch_timer: Set system_counterval_t.cs_id to constant
Identify the clocksources used by ptp_kvm by setting the clocksource ID
enum constants. This avoids dereferencing struct clocksource. Once the
system_counterval_t.cs member will be removed, this will also avoid the
need to obtain clocksource pointers from kvm_arch_ptp_get_crosststamp().

The clocksource IDs are associated to timestamps requested from the KVM
hypervisor, so the proper clocksource ID is known at the ptp_kvm request
site.

While at it, also make the ptp_kvm_get_time_fn() 'ret' variable type int as
that's what the function return value is.

Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240201010453.2212371-6-peter.hilber@opensynergy.com
2024-02-07 17:05:21 +01:00
Peter Hilber
576bd4962f x86/kvm, ptp/kvm: Add clocksource ID, set system_counterval_t.cs_id
Add a clocksource ID for the x86 kvmclock.

Also, for ptp_kvm, set the recently added struct system_counterval_t member
cs_id to the clocksource ID (x86 kvmclock or ARM Generic Timer). In the
future, get_device_system_crosststamp() will compare the clocksource ID in
struct system_counterval_t, rather than the clocksource.

For now, to avoid touching too many subsystems at once, extract the
clocksource ID from the clocksource. The clocksource dereference will be
removed once everything is converted over..

Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240201010453.2212371-5-peter.hilber@opensynergy.com
2024-02-07 17:05:21 +01:00
Peter Hilber
a2c1fe7206 x86/tsc: Add clocksource ID, set system_counterval_t.cs_id
Add a clocksource ID for TSC and a distinct one for the early TSC.

Use distinct IDs for TSC and early TSC, since those also have distinct
clocksource structs. This should help to keep existing semantics when
comparing clocksources.

Also, set the recently added struct system_counterval_t member cs_id to the
TSC ID in the cases where the clocksource member is being set to the TSC
clocksource. In the future, get_device_system_crosststamp() will compare
the clocksource ID in struct system_counterval_t, rather than the
clocksource.

For the x86 ART related code, system_counterval_t.cs == NULL corresponds to
system_counterval_t.cs_id == CSID_GENERIC (0).

Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240201010453.2212371-4-peter.hilber@opensynergy.com
2024-02-07 17:05:21 +01:00
Peter Hilber
93630d6df7 timekeeping: Add clocksource ID to struct system_counterval_t
Clocksource pointers can be problematic to obtain for drivers which are not
clocksource drivers themselves. In particular, the RFC virtio_rtc driver
[1] would require a new helper function to obtain a pointer to the ARM
Generic Timer clocksource. The ptp_kvm driver also required a similar
workaround.

Add a clocksource ID member to struct system_counterval_t, which in the
future shall identify the clocksource, and which shall replace the struct
clocksource * member. By this, get_device_system_crosststamp() callers
(such as virtio_rtc and ptp_kvm) will be able to supply easily accessible
clocksource ids instead of clocksource pointers.

[1] https://lore.kernel.org/lkml/20231218073849.35294-1-peter.hilber@opensynergy.com/

Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240201010453.2212371-3-peter.hilber@opensynergy.com
2024-02-07 17:05:21 +01:00
Randy Dunlap
c55cbfcea6 x86/tsc: Correct kernel-doc notation
Add or modify function descriptions to remove kernel-doc warnings:

tsc.c:655: warning: missing initial short description on line:
 * native_calibrate_tsc
tsc.c:1339: warning: Excess function parameter 'cycles' description in 'convert_art_ns_to_tsc'
tsc.c:1339: warning: Excess function parameter 'cs' description in 'convert_art_ns_to_tsc'
tsc.c:1373: warning: Function parameter or member 'work' not described in 'tsc_refine_calibration_work'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231221033620.32379-1-rdunlap@infradead.org
2024-02-07 17:05:21 +01:00
Chao Gao
d7f0a00e43 KVM: VMX: Report up-to-date exit qualification to userspace
Use vmx_get_exit_qual() to read the exit qualification.

vcpu->arch.exit_qualification is cached for EPT violation only and even
for EPT violation, it is stale at this point because the up-to-date
value is cached later in handle_ept_violation().

Fixes: 70bcd708df ("KVM: vmx: expose more information for KVM_INTERNAL_ERROR_DELIVERY_EV exits")
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20231229022652.300095-1-chao.gao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-07 07:47:53 -08:00
Tomasz Figa
97d4b55111 MAINTAINERS: Remove Tomasz from Samsung clock and pinctrl entries
I have been no longer at Samsung for a long time, the platforms
that I am knowledgable about (S3C24xx, S3C64xx, Exynos 4) are no longer
relevant and we have people with better capabilities as maintainers
already, so let me remove myself. Thanks for the nice collaboration
everyone!

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Link: https://lore.kernel.org/r/20240201140134.4345-1-tomasz.figa@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-07 16:35:26 +01:00
André Draszik
4544361672 dt-bindings: samsung: exynos-sysreg: gs101-peric0/1 require a clock
... otherwise it won't be accessible.

Update the schema to make this obvious.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20240126115517.1751971-1-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-07 16:35:25 +01:00
André Draszik
2999e786d7 clk: samsung: gs101: add support for cmu_peric1
CMU_PERIC1 is the clock management unit used for the peric1 block which
is used for additional USI, I3C and PWM interfaces/busses. Add support
for muxes, dividers and gates of cmu_peric1, except for
CLK_GOUT_PERIC1_IP which isn't well described in the datasheet and
which downstream also ignores (similar to cmu_peric0).

Two clocks have been marked as CLK_IS_CRITICAL for the following
reason:
    * disabling them makes it impossible to access any peric1
      registers, (including those two registers).
    * disabling gout_peric1_lhm_axi_p_peric1_i_clk sometimes has the
      additional effect of making the whole system unresponsive.

One clock marked as CLK_IGNORE_UNUSED needs to be kept on until we have
updated the respective driver for the following reason:
    * gout_peric1_gpio_peric1_pclk is required by the pinctrl
      configuration. With this clock disabled, reconfiguring the pins
      (for USI/I2C, USI/UART) will hang during register access.
      Since pinctrl-samsung doesn't support a clock at the moment, we
      just keep the kernel from disabling it at boot, until we have an
      update for pinctrl-samsung, at which point we'll drop the flag.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-4-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-07 16:33:16 +01:00
Krzysztof Kozlowski
3ab1d817c3 dt-bindings for Google GS101 clock controllers for v6.9
The Devicetree binding headers for Samsung Exynos and Google GS101 clock
 controllers, used by the Samsung clock controller drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmXDomAQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD15RVD/47GXcMhrlxZ6dR+r2Ym6sBzpkGl44Qz4b6
 i+N/7mXVqpOAnNvxMd3i/0ZjOZJR4HO2xKmUJ2IGSZlNDmF57e+Uagd0Wf4NCr24
 V87R1Fu96hIKkHpSbPZB9jDv03YLPK/qw8k/zfEE88Dbgkzp3B+aL+XiK49hiESs
 /lFIxMwcGgpGLJq7SPADSmRF9eeZQ6S90rZblMJT0i6zXT/m3hWw4cwxPLVuNktH
 YBJuhwYA1ZQ+/vLif0PIN9NvgTmTS/NbLznE2HrKZZs2Uc7zwCiw0zeLB82OhMLM
 meSEc2qoGBEpZrrZWUn3jSIEcjcagLHpzLgZ8D6OWuYaLOyfBN3lz3S3mO5BEJOi
 eBClaSGu6KGo6gNUh4X4X5Ja5G00rlc+zvC9OuOmXTsM//1njwJaeb34REwjvaWq
 meOgmr4xKFfVJS8k324xWE5ieADNfPxbcL7855oz6JVMti3KG9SkpFr6o1OObAGm
 jlvuZV0hMiRXHxSUkjsluHVLTVm5AVLaBwTD1abwLoq/xpy0m68Ib9fl2/3CcrQp
 U7fKOCW7/aDbnq3bg++xxlhX/iyx7R0RBRRVetnqPvqtln7FyNiLvKV0nG08D0da
 8F7p0DHfwIY15vAXV+YFqDFfOHtUyXdorcly2i7ezFsKFxjOVxGwg+0DZINUFuJp
 ONoXM/q7Qg==
 =TjPm
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-bindings-clk-6.9-3' into next/clk

dt-bindings for Google GS101 clock controllers for v6.9

The Devicetree binding headers for Samsung Exynos and Google GS101 clock
controllers, used by the Samsung clock controller drivers.
2024-02-07 16:32:51 +01:00
André Draszik
d16f237bda clk: samsung: gs101: drop extra empty line
There is an extra empty line here which doesn't exist in any of the
other cmu code blocks in this file.

Drop it to align cmu_top with the rest of the file.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-2-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-07 16:28:59 +01:00
André Draszik
455061eb32 dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit
Add dt-schema documentation and clock IDs for the Connectivity
Peripheral 1 (PERIC1) clock management unit.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-3-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-07 16:27:13 +01:00
Dharma Balasubiramani
565abf586f
ASoC: dt-bindings: atmel,asoc-wm8904: Convert to json-schema
Convert atmel,asoc-wm8904 devicetree binding to json-schema.

Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240207094144.195397-1-dharma.b@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-07 15:23:53 +00:00
Amadeusz Sławiński
44d3b8a19b
ASoC: Intel: avs: Fix dynamic port assignment when TDM is set
In case TDM is set in topology on SSP0, parser will overwrite vindex
value, because it only checks if port is set. Fix this by checking whole
field value.

Fixes: e6d50e474e ("ASoC: Intel: avs: Improve topology parsing of dynamic strings")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240207112624.2132821-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-07 15:23:49 +00:00
Henrik Grimler
60f1164e21 ARM: dts: samsung: exynos5420-galaxy-tab-common: add wifi node
By using brcm/brcmfmac4354-sdio.bin from linux-firmware together with
nvram.txt from vendor firmware wifi works well on the chagall-wifi and
klimt-lte.

Signed-off-by: Henrik Grimler <henrik@grimler.se>
Link: https://lore.kernel.org/r/20240206-galaxy-tab-s-cleanup-v2-1-89025c6c66c5@grimler.se
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-07 16:22:01 +01:00
David Lechner
abb4b46c43
spi: axi-spi-engine: move msg finalization out of irq handler
As a general principal, it is best to do as little as possible in an
interrupt handler. This patch reworks the AXI SPI Engine driver to move
timer_delete_sync() and spi_finalize_current_message() out of the
interrupt handler. Instead, spi_finalize_current_message() is moved to
the transfer_one_message function (similar to nearly all other SPI
controllers). A completion is now used to wait for the sync interrupt
that indicates that the message is complete. The watchdog timer is no
longer needed since we can use the wait_for_completion_timeout()
function to wait for the message to complete with the same effect.

As a bonus, these changes also improve throughput of the SPI controller.
For example, this was tested on a ZynqMP with a 80MHz SCLK reading 4
byte samples from an ADC. The max measured throughput increased from
26k to 28k samples per second.

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240207-axi-spi-engine-round-2-1-v2-2-40c0b4e85352@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-07 15:17:43 +00:00
David Lechner
531860e12d
spi: axi-spi-engine: remove use of ida for sync id
Profiling has shown that ida_alloc_range() accounts for about 10% of the
time spent in spi_sync() when using the AXI SPI Engine controller. This
call is used to create a unique id for each SPI message to match to an
IRQ when the message is complete.

Since the core SPI code serializes messages in a message queue, we can
only have one message in flight at a time, namely host->cur_msg. This
means that we can use a fixed value instead of a unique id for each
message since there can never be more than one message pending at a
time.

This patch removes the use of ida for the sync id and replaces it with a
constant value. This simplifies the driver and improves performance.

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240207-axi-spi-engine-round-2-1-v2-1-40c0b4e85352@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-07 15:17:42 +00:00
Lukas Bulwahn
46d5baf046
MAINTAINERS: repair entry for MICROCHIP MCP16502 PMIC DRIVER
Commit 64db3e8d7b ("regulator: dt-bindings: microchip,mcp16502: convert
to YAML") converts mcp16502-regulator.txt to microchip,mcp16502.yaml, but
misses to adjust its reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Repair this file reference in MICROCHIP MCP16502 PMIC DRIVER.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20240207132231.16392-1-lukas.bulwahn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-07 15:17:24 +00:00
Nathan Chancellor
04edb5dc68 wifi: ath12k: Fix uninitialized use of ret in ath12k_mac_allocate()
Clang warns (or errors with CONFIG_WERROR=y):

  drivers/net/wireless/ath/ath12k/mac.c:8060:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]
   8060 |         return ret;
        |                ^~~
  drivers/net/wireless/ath/ath12k/mac.c:8022:9: note: initialize the variable 'ret' to silence this warning
   8022 |         int ret, i, j;
        |                ^
        |                 = 0
  1 error generated.

Commit 6db6e70a17 ("wifi: ath12k: Introduce the container for mac80211
hw") added a completely uninitialized use of ret. Prior to that change,
-ENOMEM was returned to the callers of ath12k_mac_allocate() whenever
ath12k_mac_hw_allocate() failed. Assign that value to ret to make sure
it is always initialized when used and clear up the warning.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1989i
Fixes: 6db6e70a17 ("wifi: ath12k: Introduce the container for mac80211 hw")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240205-ath12k-mac-wuninitialized-v1-1-3fda7b17357f@kernel.org
2024-02-07 17:08:07 +02:00
Jeff Johnson
d7a5c7cde2 wifi: ath11k: Really consistently use ath11k_vif_to_arvif()
Commit 9476cda44c ("wifi: ath11k: Consistently use ath11k_vif_to_arvif()")
previously replaced all open coding of the ath11k_vif_to_arvif()
functionality. Subsequently two more instances of open coding were
introduced, one in commit 92425f788f ("wifi: ath11k: fill parameters for
vdev set tpc power WMI command") and one in commit 6f4e235be6 ("wifi:
ath11k: add parse of transmit power envelope element"), so fix those as
well.

No functional changes, compile tested only.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240205-ath11k_vif_to_arvif-v1-1-7c41313c8318@quicinc.com
2024-02-07 17:07:45 +02:00
Kang Yang
e65a639865 wifi: ath12k: advertise P2P dev support for WCN7850
Now that all the necessary pieces are implemented we can enable P2P
support for WCN7850.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-12-quic_kangyang@quicinc.com
2024-02-07 17:07:00 +02:00
Kang Yang
cf0425eead wifi: ath12k: designating channel frequency for ROC scan
For P2P mode, the WLAN interface may be requested to remain on a
specific channel and then to send some management frames on that
channel. Now chananel frequency of wmi_mgmt_send_cmd is set as 0. As
a result, firmware may choose a default but wrong channel.

Fix it by assigning chanfreq field with the ROC channel frequency.

This change only applies to WCN7850, other chips are not affected.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-11-quic_kangyang@quicinc.com
2024-02-07 17:07:00 +02:00
Kang Yang
c9e4e41e71 wifi: ath12k: move peer delete after vdev stop of station for WCN7850
In current code, when STA/P2P Client connect to AP/P2P GO, the WMI
command sequence is:

peer_create->vdev_start->vdev_up

And sequence of STA/P2P Client disconnect from AP/P2P GO is:

peer_delete->vdev_down->vdev_stop

This sequence of disconnect is not opposite of connect. For STA or P2P
GO, bss peer is not needed by firmware during handling vdev stop
command. So with this sequence, STA and P2P GO can work normally.

But for P2P Client, firmware needs bss peer in some functions during
handling vdev stop command. The opposite sequence of disconnect should
be:

vdev_down->vdev_stop->peer_delete

So change the sequence of disconnect as above opposite sequence for
WCN7850.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-10-quic_kangyang@quicinc.com
2024-02-07 17:07:00 +02:00
Kang Yang
32e7b12e26 wifi: ath12k: allow specific mgmt frame tx while vdev is not up
In current code, the management frames must be sent after vdev is started.
But for P2P device, vdev won't start until P2P negotiation is done. So
this logic doesn't make sense for P2P device.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-9-quic_kangyang@quicinc.com
2024-02-07 17:07:00 +02:00
Kang Yang
28035a88f8 wifi: ath12k: change WLAN_SCAN_PARAMS_MAX_IE_LEN from 256 to 512
Mac80211 needs more space for P2P scan ie in P2P mode, 256 is not
enough, resize it to 512.

Also delete the duplicate macro definitions in wmi.h.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-8-quic_kangyang@quicinc.com
2024-02-07 17:06:59 +02:00
Kang Yang
2830bc9e78 wifi: ath12k: implement remain on channel for P2P mode
Implement remain on channel for p2p mode in ath12k_ops:
        ath12k_mac_op_remain_on_channel
        ath12k_mac_op_cancel_remain_on_channel

P2P device can trigger ROC scan. Then keep listening or sending management
frames on particular channels.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-7-quic_kangyang@quicinc.com
2024-02-07 17:06:59 +02:00
Kang Yang
9411eecb60 wifi: ath12k: implement handling of P2P NoA event
The Notice of Absence (NoA) attribute is used by the P2P Group Owner to
signal its absence due to power save timing, concurrent operation, or
off-channel scanning. It is also used in the P2P Presence Request-Response
mechanism.

The NoA attribute shall be present in the P2P IE in the beacon frames
transmitted by a P2P Group Owner when a NoA schedule is being advertised,
or when the CTWindow is non-zero.

So add support to update P2P information after P2P GO is up through
event WMI_P2P_NOA_EVENTID, and always put it in probe resp.

Create p2p.c and p2p.h for P2P related functions and definitions.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-6-quic_kangyang@quicinc.com
2024-02-07 17:06:59 +02:00
Kang Yang
575ec73cb8 wifi: ath12k: add P2P IE in beacon template
P2P Element is a necessary component of P2P protocol communication.
It contains the Vendor Specific Information Element which includes
the WFA OUI and an OUI Type indicating P2P.

Add P2P IE in beacon template, and implement WMI interface for it.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-5-quic_kangyang@quicinc.com
2024-02-07 17:06:59 +02:00
Kang Yang
ef860c6a3a wifi: ath12k: change interface combination for P2P mode
Current interface combination doesn't support P2P mode. Change the
combination for P2P mode.

Also, there is a bug that when mesh is enabled but ap is not enabled.
In this situation, the mesh's max_interface of interface combination
won't be set.

So assign the max_interfaces for mesh directly.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-4-quic_kangyang@quicinc.com
2024-02-07 17:06:58 +02:00
Kang Yang
019b58dcb6 wifi: ath12k: fix incorrect logic of calculating vdev_stats_id
During calculate vdev_stats_id, will compare vdev_stats_id with
ATH12K_INVAL_VDEV_STATS_ID by '<='. If vdev_stats_id is relatively
small, then assign ATH12K_INVAL_VDEV_STATS_ID to vdev_stats_id.

This logic is incorrect. Firstly, should use '>=' instead of '<=' to
check if this u8 variable exceeds the max valid range.

Secondly, should use the maximum value as comparison value.

Correct comparison symbols and use the maximum value
ATH12K_MAX_VDEV_STATS_ID for comparison.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-3-quic_kangyang@quicinc.com
2024-02-07 17:06:58 +02:00
Kang Yang
4f684533af wifi: ath12k: fix broken structure wmi_vdev_create_cmd
Current structure wmi_vdev_create_cmd is not matched to the firmware
definition. So update it.

And update vdev_stats_id_valid for vdev_stats_id.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-2-quic_kangyang@quicinc.com
2024-02-07 17:06:58 +02:00
Qiang Ma
aeaf3e6cf8 drm/amdgpu: Clear the hotplug interrupt ack bit before hpd initialization
Problem:
The computer in the bios initialization process, unplug the HDMI display,
wait until the system up, plug in the HDMI display, did not enter the
hotplug interrupt function, the display is not bright.

Fix:
After the above problem occurs, and the hpd ack interrupt bit is 1,
the interrupt should be cleared during hpd_init initialization so that
when the driver is ready, it can respond to the hpd interrupt normally.

Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07 10:01:10 -05:00
Alex Deucher
39a82d304b drm/amdgpu: fix typo in parameter description
Missing space.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07 10:01:05 -05:00
shaoyunl
3fad156572 drm/amdgpu: Only create mes event log debugfs when mes is enabled
Skip the debugfs file creation for mes event log if the GPU
doesn't use MES. This to prevent potential kernel oops when
user try to read the event log in debugfs on a GPU without MES

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07 10:00:56 -05:00
Srinivasan Shanmugam
fb5a3d0370 drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'
In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;"
pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to
ensure the tg is not NULL.

Fixes: 474ac4a875 ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07 10:00:29 -05:00
Srinivasan Shanmugam
886571d217 drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'
'panel_cntl' structure used to control the display panel could be null,
dereferencing it could lead to a null pointer access.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250)

Fixes: 474ac4a875 ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07 09:59:59 -05:00
Ma Jun
fb38ad0aab drm/amdgpu/pm: Use inline function for IP version check
Use existing inline function for IP version check.

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07 09:59:44 -05:00
Tycho Andersen
f0ece18e99
selftests: add ESRCH tests for pidfd_getfd()
Ensure that pidfd_getfd() reports -ESRCH if the task is already exiting.

Signed-off-by: Tycho Andersen <tandersen@netflix.com>
Link: https://lore.kernel.org/r/20240206192357.81942-1-tycho@tycho.pizza
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-07 15:48:31 +01:00
Ricardo B. Marliere
49f1ff50d4 clockevents: Make clockevents_subsys const
Now that the driver core can properly handle constant struct bus_type,
move the clockevents_subsys variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-time-v1-2-207ec18e24b8@marliere.net
2024-02-07 15:11:24 +01:00
Ricardo B. Marliere
2bc7fc24f9 clocksource: Make clocksource_subsys const
Now that the driver core can properly handle constant struct bus_type,
move the clocksource_subsys variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-time-v1-1-207ec18e24b8@marliere.net
2024-02-07 15:11:24 +01:00
Thomas Richard
bc25f0b571 phy: ti: gmii-sel: add resume support
The resume callback restores the submode of each PHY.

It uses the submode stored in struct phy_gmii_sel_phy_priv (variable
phy_if_mode). The submode was saved by the set_mode PHY operation.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240125171754.773909-1-thomas.richard@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-02-07 15:02:13 +01:00
Phi-bang Nguyen
442f34ede7 phy: mtk-mipi-csi: add driver for CSI phy
This is a new driver that supports the MIPI CSI CD-PHY version 0.5

The number of PHYs depend on the SoC.
Each PHY can support D-PHY only or CD-PHY configuration.
The driver supports only D-PHY mode, so CD-PHY
compatible PHY are configured in D-PHY mode.

[Julien Stephan: simplify driver model: one instance per phy vs
one instance for all phys]

Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
[Julien Stephan: refactor code]
Co-developed-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240111101738.468916-1-jstephan@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-02-07 15:02:13 +01:00
Florian Sylvestre
a41baa4f0f dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5
This adds the bindings, for the MIPI CD-PHY module v0.5 embedded in
some Mediatek soc, such as the mt8365

Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240111101504.468169-2-jstephan@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-02-07 15:02:13 +01:00