Commit graph

1,264,532 commits

Author SHA1 Message Date
Johannes Berg
51eb17b8d5 wifi: iwlwifi: remove Gl A-step remnants
The IWL_DEVICE_GL_A macro is no longer used, and couldn't
be, so remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.8929a06c3a55.I3c21305e4b7fa3aba938bc860269e848fe262e88@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 14:04:43 +01:00
Ilan Peer
137d33ac47 wifi: iwlwifi: mvm: Fix FTM initiator flags
When secure LTF is used MFP must also be set.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.6cad71069e87.I7f9fd5239cfd2244f155f88419980e6e91d00ff2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 14:04:42 +01:00
Johannes Berg
f639602a58 wifi: iwlwifi: always have 'uats_enabled'
We check this in code that'd be complicated to put under
ifdef (CONFIG_ACPI), so just always have 'uats_enabled'.

Fixes: 4a9bb5b4d9 ("wifi: iwlwifi: fw: Add support for UATS table in UHB")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.bdc5fb20f00a.I902d801d79873c5c9cd51cef8e8226e2acefe88d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 14:04:42 +01:00
Johannes Berg
bc197d3c40 wifi: iwlwifi: mvm: don't set trigger frame padding in AP mode
This field is reserved in AP mode, don't set any bits in it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.f5eeb717212e.I60fa4843a8634922281580b925db2c2699e3a7bc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 14:04:42 +01:00
Colin Ian King
64a06679e6 wifi: iwlwifi: Fix spelling mistake "SESION" -> "SESSION"
There is a spelling mistake in a WARN message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.ff31e9385d29.I3a224e6a9294fdec431919fb4ec9315801e77454@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 14:04:42 +01:00
Johannes Berg
0c769cb6b9 wifi: iwlwifi: mvm: d3: fix IPN byte order
The IPN is reported by the firmware in 6 bytes little endian,
but mac80211 expects big endian so it can do memcmp() on it.
We used to store this as a u64 which was filled in the right
way, but never used. When implementing that it's used, we
changed it to just be 6 bytes, but lost the conversion. Add
it back.

Fixes: 04f78e242f ("wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.138ed8a698e3.I1b66c386e45b5392696424ec636474bff86fd5ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 14:04:42 +01:00
Ayala Beker
8001849921 wifi: iwlwifi: mvm: add support for TID to link mapping neg request
Add support for handling TID to link mapping negotiation
request and decide whether to accept it or not.
Accept the request if all TIDs are mapped to the same link set,
otherwise reject it.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.aab9819c378d.Icf6b79a362763e2e8b85959471f303b586617242@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 14:04:42 +01:00
Miri Korenblit
c8d8f39111 wifi: iwlwifi: fix EWRD table validity check
EWRD ACPI table contains up to 3 additional sar profiles.
According to the BIOS spec, the table contains a n_profile
variable indicating how many additional profiles exist in the
table.
Currently we check that n_profiles is not <= 0.
But according to the BIOS spec, 0 is a valid value,
and it can't be < 0 anyway because we receive that from ACPI as
an unsigned integer.

Fixes: 39c1a9728f ("iwlwifi: refactor the SAR tables from mvm to acpi")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240129211905.448ea2f40814.Iffd2aadf8e8693e6cb599bee0406a800a0c1e081@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 14:04:42 +01:00
Emmanuel Grumbach
1fa942f316 wifi: iwlwifi: mvm: fix a battery life regression
Fix the DBG_CONFIG_TOKEN to not enable debug components that would
prevent the device to save power.

Fixes: fc2fe0a5e8 ("wifi: iwlwifi: fw: disable firmware debug asserts")
Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Eilon Rinat <eilon.rinat@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.90d2600edc27.Id657ea2f0ddb131f5f9d0ac39aeb8c88754fe54b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:50:52 +01:00
Miri Korenblit
a6dfe1e744 wifi: iwlwifi: cleanup uefi variables loading
Extract the logic that is common to all variables loading
to a function.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240128084842.454f32c4bcfe.I4835fe657475ac28ef6aef4d292fac63c6ce9a34@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:50:35 +01:00
Miri Korenblit
ebe8f41319 wifi: iwlwifi: implement GLAI ACPI table loading
All the regulatory tables from BIOS are going to be loaded
(preferably) from the UEFI instead of the ACPI.
There is a security issue with the fact that anyone can
add these UEFI variables.
The solution for that is to have a lock for all WIFI GUID UEFI
variables, and only if the UEFI variables are locked then we can
read it.
The status of the lock (unlocked, locked, test mode) is indicated
in a ACPI table: Guid Lock ACPI Indicator.
Load this table so the driver knows whether to read from UEFI or
not

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240128084842.53994809fbdd.I1bd10aafc387bc04f375e386861ee2bcb82f0a61@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:50:34 +01:00
Johannes Berg
d3b2c6c65b wifi: iwlwifi: mvm: initialize rates in FW earlier
When connecting to an AP, we currently initialize the rate
control only after associating. Since we now use firmware
to assign rates to auth/assoc frames rather than using the
data in the station and the firmware doesn't know, they're
transmitted using low mandatory rates. However, if the AP
advertised only higher supported rates we want to use them
to be nicer (it still must receive mandatory rates though),
so send the information to the firmware earlier to have it
know about it and be able to use it.

Fixes: 499d027904 ("wifi: iwlwifi: Use FW rate for non-data frames")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.ed7ab1c859c2.I4b4d4fc3905c8d8470fc0fee4648f25c950c9bb7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:50:34 +01:00
Emmanuel Grumbach
e50a88e5cb wifi: iwlwifi: mvm: disconnect station vifs if recovery failed
This will allow to reconnect immediately instead of leaving the
connection in a limbo state.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.e90531cd3a36.Iebdc9483983c0d8497f9dcf9d79ec37332a5fdcc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:47:46 +01:00
Johannes Berg
296f3e9267 wifi: iwlwifi: acpi: fix WPFC reading
The code reading the WPFC table needs to take into account
the domain type (first element in the package), shouldn't
leak the memory if it fails, and has a bad comment. Fix all
these issues.

Fixes: c4c9545477 ("wifi: iwlwifi: implement WPFC ACPI table loading")
Reported-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman Gregory <gregory.greenman@intel.com>
Link: https://msgid.link/20240128084842.2afeb476b62d.I200568dc42a277e21c12be99d5aaa39b009d45da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:47:46 +01:00
Johannes Berg
ec06e9b959 wifi: iwlwifi: fw: dbg: ensure correct config name sizes
This hard-codes the size, but it's not obvious why that's
correct. Use sizeof() and cross-check the two structs.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.58fcdea2ace7.I49cb1d7bdbea12085aada0c96ef42fcbcb3d2b38@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:47:46 +01:00
Johannes Berg
ea1d166fae wifi: iwlwifi: dbg-tlv: ensure NUL termination
The iwl_fw_ini_debug_info_tlv is used as a string, so we must
ensure the string is terminated correctly before using it.

Fixes: a9248de424 ("iwlwifi: dbg_ini: add TLV allocation new API support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.be15e858ee89.Ibff93429cf999eafc7b26f3eef4c055dc84984a0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:47:46 +01:00
Johannes Berg
1722c83f8f wifi: iwlwifi: dbg-tlv: use struct_size() for allocation
This is effectively the same since we don't even have a
multiplication, but better captures what happens with
the length.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.f301641eb916.I66b7b48a526377d682eecef874373bf3a01076c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:47:46 +01:00
Johannes Berg
2f72c759fd wifi: iwlwifi: dbg-tlv: avoid extra allocation/copy
In iwl_dbg_tlv_alloc_trigger() the code makes a copy just
to modify it and pass it to another function to make a copy
again. Change the API to return the copy so the adjustment
can be done without another copy.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.075c8b9f7030.Id5a61e1a87a9c6932727fb4e2c9b54ed6070362a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:47:46 +01:00
Johannes Berg
8a41c01740 wifi: iwlwifi: fix some kernel-doc issues
Add return descriptions, move description contents after
(parameter) sections and fix short descriptions.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.02ac00f67239.I4ad17097badfcbb82ccdb8c126f61a6f3170798e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:47:46 +01:00
Johannes Berg
7255263962 wifi: iwlwifi: mvm: d3: disconnect on GTK rekey failure
If there was a rekey failure during D3 when firmware is
handling the GTK rekeying, and it decided that we should
wake up, then there was an issue in the connection and
we don't necessarily have the right keys, so we should
disconnect.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.944af193d479.I5ef9f1f0e048d44d7158615d071b793d69eceb75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:47:45 +01:00
Johannes Berg
91380f768d wifi: iwlwifi: mvm: report beacon protection failures
Andrei reports that we just silently drop beacons after we
report the key counters, but never report to userspace, so
wpa_supplicant cannot send the WNM action frame. Fix that.

Fixes: b1fdc2505a ("iwlwifi: mvm: advertise BIGTK client support if available")
Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.7d855442cdce.Iba90b26f893dc8c49bfb8be65373cd0a138af12c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:47:45 +01:00
Ilan Peer
619a900f27 wifi: iwlwifi: mvm: Add support for removing responder TKs
When removing a PASN station, the TK must be removed before
the station is removed as otherwise the FW would assert.

To handle this, store the key configuration, and use it to remove
the key when the station is removed.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240131230734.3e6364730c04.Ia76dc4a9d399f1f68ac6b157d844b63f74d5159f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:46:40 +01:00
Miri Korenblit
10159a4566 wifi: iwlwifi: disable eSR when BT is active
eSR should be disabled when BT Coex is active and:
- LB link is the primary link.
- LB link is the secondary link and the predicted BT penalty
  (the wifi loss rate caused by BT interference) is higher
  than a given threshold.
If one of the conditions above is no longer true then re-enable eSR.

In order to implement this, add support for version 5 of
BT_PROFILE_NOTIFICATION, in which the bt penalty is provided
by FW.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131225342.b922b6485af8.I7d808ce535a7372aca9cb85c045755e6788a4904@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02 13:46:28 +01:00
David S. Miller
d81c0792e6 This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
 
  - Improve error handling in DAT and uevent generator,
    by Markus Elfring (2 patches)
 
  - Drop usage of export.h, by Sven Eckelmann
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAmW7eyoWHHN3QHNpbW9u
 d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoUxzD/9xhPlaNHquoeB45kj2EY6UwERi
 bTdX+gcN0n++M9OEW1FIjnDjHbYLb+bPUu2frADnkiOg6ckgCTboE7j0pceydKQ2
 z/4F26ohmaoesLD+YCl1x33791KQicgFZccxlC+CWi4mpVvNykfFUOVETY3/wq+G
 yUXrZ7tGOTat5qO17wZY7+uIvZgp55WNA8YsvWgPy7vjPixkftD9LiwAs92+Shjl
 1+jRvWmcfHhBDInYIdo2TB2cJUJ4B0sYVaRhQAkFkhnR9Wm2p9w+V7U/Xk3z8K4K
 ox6iIeXjpd5Hcb8LRcogvoRuOouMmqNvfY7wS7/qC/QXQEMph9GKDsqpbZ+WpHA3
 wRUao9JoQ+nH4Oe8K4nhRA7I8MuXscVMoTNIhETjiuk+sgF7UFgUQIHy17WK4EPc
 MM+NmDLvCu3TBU4Br1lwVGhdeDIfMqvcSlBUc2QqT/iySd7CmUGF3U1ypjEaLq6o
 dGnJOa8lfEGhy57Z1ir+CcOndUl0xBNAu+wC9zko3DW9wbCMKQdOwcS2VGvIGcdP
 UQrdi9KJEYHt8my5cZwtjUCtqbbe1AKVJrJ6e+f1MrhM64ynDuFsGtIM4urraaXI
 Vigbs9rTnVWwhnA3VLSxeAK+k+qVkjLrcEY0EJwk1DU+fvYyaFdQZY/RMn/EQGFl
 o0/OfhX3sTCsE0P1zg==
 =Uo1w
 -----END PGP SIGNATURE-----

Merge tag 'batadv-next-pullrequest-20240201' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
This cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - Improve error handling in DAT and uevent generator,
   by Markus Elfring (2 patches)

 - Drop usage of export.h, by Sven Eckelmann
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02 12:44:16 +00:00
Karthikeyan Periyasamy
e7c7fbb582 wifi: ath12k: refactor the rfkill worker
Currently, the rfkill worker handler access mac80211 HW from the radio/link
structure. This is will be incorrect for single wiphy model, as they will
hold multiple link/radio structures. To fix this, access mac80211 HW based
on the number of hardware in the SoC/chip. This approach makes the rfkill
worker handler compatible with both multi wiphy and single wiphy models.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240125154555.3169706-1-quic_periyasa@quicinc.com
2024-02-02 14:38:51 +02:00
Lingbo Kong
ad2b29ad94 wifi: ath12k: add processing for TWT disable event
When ath12k send TWT disable command to firmware, firmware will return a
TWT disable event to ath12k. Through the analysis of TWT disable event
status, we can easily obtain the status of TWT disable command. It can be
more convenient to debug TWT.

This patch works with WCN7850 and QCN9274.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240122085336.3985-3-quic_lingbok@quicinc.com
2024-02-02 14:38:13 +02:00
Lingbo Kong
2f92b22bee wifi: ath12k: add processing for TWT enable event
When ath12k send TWT enable command to firmware, firmware will return a TWT
enable event to ath12k. Through the analysis of TWT enable event status, we
can easily obtain the status of TWT enable command. It can be more
convenient to debug TWT.

This patch works with WCN7850 and QCN9274.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240122085336.3985-2-quic_lingbok@quicinc.com
2024-02-02 14:38:13 +02:00
Raj Kumar Bhagat
2d3a7384b9 wifi: ath12k: disable QMI PHY capability learn in split-phy QCN9274
QMI PHY capability learn is used to get PHY count information to
support single/multi link operation (SLO/MLO) configuration. The
QCN9274 dualmac firmware currently do not support SLO/MLO, if two
PHYs are within the same chip. Due to this firmware crashes in
split-phy QCN9274, while bringing up AP with MLO parameter enabled
in QMI host capability request message.

The QMI PHY capability learn is not required for split-phy QCN9274,
if SLO/MLO is not supported within the same chip. Hence, disable QMI
PHY capability learn support in split-phy QCN9274.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-14-quic_rajkbhag@quicinc.com
2024-02-02 14:32:52 +02:00
Ganesh Babu Jothiram
af9bc78d14 wifi: ath12k: Read board id to support split-PHY QCN9274
QCN9274 can support single-PHY or split-PHY architecture. Currently,
only the single-PHY architecture is supported in ath12k.

The split-PHY QCN9274 requires different AMSS firmware binary
"amss_dualmac.bin".

Hence, add support to read board id from OTP. Based on board id
decide whether single-mac / dual-mac firmware needs to be downloaded
to the target. Also, update HW param max_radios to support split-PHY
in QCN9274.

Also, add new Firmware IE for firmware_N.bin
"ATH11K_FW_IE_AMSS_DUALMAC_IMAGE" to support dualmac QCN9274.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Ganesh Babu Jothiram <quic_gjothira@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-13-quic_rajkbhag@quicinc.com
2024-02-02 14:32:52 +02:00
P Praneesh
afeee629e7 wifi: ath12k: fix PCI read and write
Currently, PCI read is failing for the registers belonging to
SECURITY_CONTROL_WLAN registers. These registers read is required
to read the board-id to identify the dual-mac QCN9274 hardware.

The failure is because, for these registers (SECURITY_CONTROL_WLAN)
offset, ath12k_pci_get_window_start() returns window_start as 0. Due
to this PCI read is done without PCI select window and with
window_start offset as 0.

Hence, fix PCI read and write by doing PCI select window and by using
the correct window_start offset - WINDOW_START for
SECURITY_CONTROL_WLAN registers.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-12-quic_rajkbhag@quicinc.com
2024-02-02 14:32:52 +02:00
Karthikeyan Periyasamy
57c8b5c332 wifi: ath12k: add MAC id support in WBM error path
When more than one pdev is supported in the chip/SoC, the packet
belonging to second pdev is given to first pdev due to not identifying
the MAC id in the WBM error path. So ping fails.

In WBM error path, src link id information not available in the
descriptor. So get this information from the msdu_end 64bit tag. It
is necessary to get the src link id to identify the MAC id in the
given chip. Then only we can pass the skb to the corresponding pdev.

The msdu_end 64bit tag is available only if compact Rx TLVs
descriptors are used. Thus, src link id is fetched correctly in WBM
error path when compact descriptors are in use.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-11-quic_rajkbhag@quicinc.com
2024-02-02 14:32:51 +02:00
Karthikeyan Kathirvel
419927ec84 wifi: ath12k: subscribe required word mask from rx tlv
Most of the RX descriptors fields are currently not used in the
ath12k driver. Hence add support to selectively subscribe to the
required quad words (64 bits) within msdu_end and mpdu_start of
rx_desc.

Add compact rx_desc structures and configure the bit mask for Rx TLVs
(msdu_end, mpdu_start, mpdu_end) via registers. With these registers
SW can configure to DMA the partial TLV struct to Rx buffer.

Each TLV type has its own register to configure the mask value.
The mask value configured in register will indicate if a particular
QWORD has to be written to rx buffer or not i.e., if Nth bit is enabled
in the mask Nth QWORD will be written and it will not be written if the
bit is disabled in mask. While 0th bit indicates whether TLV tag will be
written or not.

Advantages of Qword subscription of TLVs
- Avoid multiple cache-line misses as the all the required fields
of the TLV are within 128 bytes.
- Memory optimization as TLVs + DATA + SHINFO can fit in 2k buffer
even for 64 bit kernel.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-10-quic_rajkbhag@quicinc.com
2024-02-02 14:32:51 +02:00
Raj Kumar Bhagat
3cf1a9f7a1 wifi: ath12k: remove hal_desc_sz from hw params
With word mask subscription support, the rx_desc structure will
change. The fields in this structure rx_desc will be reduced to only
the required fields. To make word mask subscription changes compatible
with the older firmware version (firmware that does not support word
mask subscription), two different structures of rx_desc will be
required for the same hardware.

The hardware param hal_desc_sz value cannot be constant for the same
hardware. It depends on the size of rx_desc structure which may
change based on firmware capability to support word mask subscription.
Hence, remove hal_desc_sz from hardware param and add hal_rx_ops
to get the size of rx_desc in run time.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-9-quic_rajkbhag@quicinc.com
2024-02-02 14:32:51 +02:00
Raj Kumar Bhagat
f7019c2fcd wifi: ath12k: split hal_ops to support RX TLVs word mask compaction
With word mask subscription support, the rx_desc structure will
change. The fields in this structure rx_desc will be reduced to only
the required fields. To make word mask subscription changes compatible
with the older firmware version (firmware that does not support word
mask subscription), two different structures of rx_desc will be
required for the same hardware.

Most of the hal_ops are directly related to rx_desc.

Hence, split hal_ops into operations that are independent of rx_desc
(hal_ops) and the operations that are directly dependent on rx_desc
(hal_rx_ops). These hal_rx_ops depend on both hardware and firmware
hence move them out of hw_params.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-8-quic_rajkbhag@quicinc.com
2024-02-02 14:32:51 +02:00
Aaradhana Sahu
664a1c96b2 wifi: ath12k: fix firmware assert during insmod in memory segment mode
In segment memory mode, firmware allocates memory segments of size
2 MB. This 2 MB memory is used by firmware for the number of peers.
This number of peer is sent from host to firmware during WMI init
command. For single-phy the number of peers sent is
TARGET_NUM_PEERS_SINGLE = 529 (512 + 17). While for split-phy number
of peers sent to firmware is TARGET_NUM_PEERS_DBS = 2 *(512 + 17) =
1058. With this 1058 number of peers firmware is unable to allocate
memory in 2 MB segment and firmware crash is observed.

Hence, fix this firmware crash by reducing the number of stations
TARGET_NUM_STATIONS for split-phy.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-7-quic_rajkbhag@quicinc.com
2024-02-02 14:32:50 +02:00
P Praneesh
94e8235c67 wifi: ath12k: Add logic to write QRTR node id to scratch
Currently only one MHI device is registered successfully on platform
having two or more identical MHI devices. This is beacuse QMI service
runs with identical QRTR node ID. And, qrtr-lookup cannot register
more than one QMI service with identical node ID.

Hence, generate a unique QRTR instance ID from PCIe domain number and
bus number. QMI allows node id to be written on scratch register.
Add logic to write QRTR node id to the register. It is available for
firmware to uniquely identify an instance.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-6-quic_rajkbhag@quicinc.com
2024-02-02 14:32:50 +02:00
Raj Kumar Bhagat
902700d55d wifi: ath12k: fix fetching MCBC flag for QCN9274
In QCN9274, RX packet's multicast and broadcast(MCBC) flag is fetched
from RX descriptor's msdu_end info5 member but it is not correct
for QCN9274. Due to this with encryption, ARP request packet is wrongly
marked as MCBC packet and it is sent to mac80211 without setting
RX_FLAG_PN_VALIDATED & RX_FLAG_DECRYPTED flag. This results in packet
getting dropped in mac80211. Hence ping initiated from station to AP
fails.

Fix this by fetching correct MCBC flag in case of QCN9274.
For QC9274 MCBC flag should be fetched from RX descriptor's mpdu_start
info6 member.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Fixes: 8f04852e90 ("wifi: ath12k: Use msdu_end to check MCBC")
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-5-quic_rajkbhag@quicinc.com
2024-02-02 14:32:50 +02:00
Harshitha Prem
2870338109 wifi: ath12k: add support for peer meta data version
Add support to process WMI_TLV_SERVICE_PEER_METADATA_V1A_V1B_SUPPORT
service bit. If this service bit is set by firmware, then it expects
host to set rx_peer_meta_data_ver in wmi_resource_config's flags2
with value 3 for QCN9274 to indicate as V1B meta version. If this is
not set firmware crash is seen during peer addition.

Hence, if WMI_TLV_SERVICE_PEER_METADATA_V1A_V1B_SUPPORT service bit
is set by firmware, set correct peer metadata version to avoid
firmware crash.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-4-quic_rajkbhag@quicinc.com
2024-02-02 14:32:50 +02:00
Sowmiya Sree Elavalagan
9f06911998 wifi: ath12k: fetch correct pdev id from WMI_SERVICE_READY_EXT_EVENTID
Currently while fetching for pdev id from WMI_SERVICE_READY_EXT_EVENTID
we consider 32 bit pdev_id in ath12k_wmi_caps_ext_params structure. But
Firmware sends lower 16 bit for pdev id along with higher 16 bit for
hw_link_id. Due to this wrong pdev id is fetched. This wrong pdev id
when used for WMI commands leads to Firmware crash.

Hence fetch the correct pdev id considering only the lower 16 bits.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-3-quic_rajkbhag@quicinc.com
2024-02-02 14:32:50 +02:00
Sriram R
6925eba532 wifi: ath12k: indicate NON MBSSID vdev by default during vdev start
When any VDEV is started, MBSSID flags are passed to firmware to
indicate if its a MBSSID/EMA AP vdev. If the interface is not an AP
or if the AP doesn't support MBSSID, the vdev needs to be brought up
as a non MBSSID vdev. Set these flags as a non MBSSID AP by default
which can be updated as and when MBSSID support is added in ath12k.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-2-quic_rajkbhag@quicinc.com
2024-02-02 14:32:49 +02:00
Michael Lass
fe92f874f0 net: Fix from address in memcpy_to_iter_csum()
While inlining csum_and_memcpy() into memcpy_to_iter_csum(), the from
address passed to csum_partial_copy_nocheck() was accidentally changed.
This causes a regression in applications using UDP, as for example
OpenAFS, causing loss of datagrams.

Fixes: dc32bff195 ("iov_iter, net: Fold in csum_and_memcpy()")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Signed-off-by: Michael Lass <bevan@bi-co.net>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02 12:21:02 +00:00
Kunwu Chan
20ea9327c2 net: dccp: Simplify the allocation of slab caches in dccp_ackvec_init
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.

Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02 12:19:26 +00:00
Ravi Gunasekaran
84f90efd50 dt-bindings: net: ti: Update maintainers list
Update the list with the current maintainers of TI's CPSW ethernet
peripheral.

Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02 12:18:21 +00:00
Kunwu Chan
fa33b35f86 sctp: Simplify the allocation of slab caches
commit 0a31bd5f2b ("KMEM_CACHE(): simplify slab cache creation")
introduces a new macro.
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.

Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02 12:17:32 +00:00
David S. Miller
49d703c8f4 Merge branch 'octeontx2-af-dynamically-allocate-BPIDs'
Geetha sowjanya says:

====================
Dynamically allocate BPIDs for LBK

In current driver 64 BPIDs are reserved for LBK interfaces.
These bpids are 1-to-1 mapped to LBK interface channel numbers.
In some usecases one LBK interface required more than one bpids
and in some case they may not require at all. These usescas
can't be address with the current implementation as it always
reserves only one bpid per LBK channel.

This patch addresses this issue by creating free bpid pool from
these 64 bpids instead of 1-to-1 mapping to the lbk channel.
Now based on usecase LBK interface can request a bpid using (bp_enable()).

v1 -> v2:
   - Modified commit message.
   - Dropped patch2, as for now rvu netdev have no usecase. Will
     be upstream along with the CPT driver.
   - Addressed review comments by Simon Horman.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02 12:12:36 +00:00
Geetha sowjanya
ae703539f4 octeontx2-af: Cleanup loopback device checks
PCI device IDs of RVU device IDs are configurable and
RVU PF0's (ie AF's) are currently assumed as VFs that
identify loopback functionality ie LBKVFs. But in some
cases these VFs can be setup for different functionality.
Hence remove assumptions that AF's VFs are always LBK VFs
by renaming 'is_afvf' as 'is_lbkvf' explicitly and also
identify LBK VF using PCI dev ID. Similar change is done
for other VF types.

Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02 12:12:35 +00:00
Geetha sowjanya
d6212d2e41 octeontx2-af: Create BPIDs free pool
In current driver 64 BPIDs are reserved for LBK interfaces.
These bpids are 1-to-1 mapped to LBK interface channel numbers.
In some usecases one LBK interface required more than one
bpids and in some case they may not require at all.
These usescase can't be address with the current implementation
as it always reserves only one bpid per LBK channel.
This patch addresses this issue by creating free bpid pool from these
64 bpids instead of 1-to-1 mapping to the lbk channel.
Now based on usecase LBK interface can request a bpid using (bp_enable()).

This patch also reduces the number of bpids for cgx interfaces to 8
and adds proper error code

Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02 12:12:35 +00:00
Oleg Nesterov
64bef697d3 pidfd: implement PIDFD_THREAD flag for pidfd_open()
With this flag:

	- pidfd_open() doesn't require that the target task must be
	  a thread-group leader

	- pidfd_poll() succeeds when the task exits and becomes a
	  zombie (iow, passes exit_notify()), even if it is a leader
	  and thread-group is not empty.

	  This means that the behaviour of pidfd_poll(PIDFD_THREAD,
	  pid-of-group-leader) is not well defined if it races with
	  exec() from its sub-thread; pidfd_poll() can succeed or not
	  depending on whether pidfd_task_exited() is called before
	  or after exchange_tids().

	  Perhaps we can improve this behaviour later, pidfd_poll()
	  can probably take sig->group_exec_task into account. But
	  this doesn't really differ from the case when the leader
	  exits before other threads (so pidfd_poll() succeeds) and
	  then another thread execs and pidfd_poll() will block again.

thread_group_exited() is no longer used, perhaps it can die.

Co-developed-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240131132602.GA23641@redhat.com
Tested-by: Tycho Andersen <tandersen@netflix.com>
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-02 13:12:28 +01:00
Oleg Nesterov
21e25205d7 pidfd: don't do_notify_pidfd() if !thread_group_empty()
do_notify_pidfd() makes no sense until the whole thread group exits, change
do_notify_parent() to check thread_group_empty().

This avoids the unnecessary do_notify_pidfd() when tsk is not a leader, or
it exits before other threads, or it has a ptraced EXIT_ZOMBIE sub-thread.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240127132407.GA29136@redhat.com
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-02 13:12:28 +01:00
Oleg Nesterov
cdefbf2324 pidfd: cleanup the usage of __pidfd_prepare's flags
- make pidfd_create() static.

- Don't pass O_RDWR | O_CLOEXEC to __pidfd_prepare() in copy_process(),
  __pidfd_prepare() adds these flags unconditionally.

- Kill the flags check in __pidfd_prepare(). sys_pidfd_open() checks the
  flags itself, all other users of pidfd_prepare() pass flags = 0.

  If we need a sanity check for those other in kernel users then
  WARN_ON_ONCE(flags & ~PIDFD_NONBLOCK) makes more sense.

- Don't pass O_RDWR to get_unused_fd_flags(), it ignores everything except
  O_CLOEXEC.

- Don't pass O_CLOEXEC to anon_inode_getfile(), it ignores everything except
  O_ACCMODE | O_NONBLOCK.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240125161734.GA778@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-02 13:12:28 +01:00