Commit graph

1,264,532 commits

Author SHA1 Message Date
Ard Biesheuvel
d104a6fef3 arm64: scs: Disable LTO for SCS patching code
Full LTO takes the '-mbranch-protection=none' passed to the compiler
when generating the dynamic shadow call stack patching code as a hint to
stop emitting PAC instructions altogether. (Thin LTO appears unaffected
by this)

Work around this by disabling LTO for the compilation unit, which
appears to convince the linker that it should still use PAC in the rest
of the kernel..

Fixes: 3b619e22c4 ("arm64: implement dynamic shadow call stack for Clang")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20240123133052.1417449-6-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-01-30 11:52:46 +00:00
Ard Biesheuvel
2fa28abd10 arm64: Revert "scs: Work around full LTO issue with dynamic SCS"
This reverts commit 8c5a19cb17 ("arm64: scs: Work around full LTO
issue with dynamic SCS"), which did not quite fix the issue as intended.
Apparently, -fno-unwind-tables is ignored for the final full LTO link
when it is set on any of the objects, resulting in an early boot crash
due to the SCS patching code patching itself, and attempting to pop the
return address from the shadow stack while the associated push was still
a PACIASP instruction when it executed.

Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20240123133052.1417449-5-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-01-30 11:52:46 +00:00
Helge Deller
60365049cc ipv6: Ensure natural alignment of const ipv6 loopback and router addresses
On a parisc64 kernel I sometimes notice this kernel warning:
Kernel unaligned access to 0x40ff8814 at ndisc_send_skb+0xc0/0x4d8

The address 0x40ff8814 points to the in6addr_linklocal_allrouters
variable and the warning simply means that some ipv6 function tries to
read a 64-bit word directly from the not-64-bit aligned
in6addr_linklocal_allrouters variable.

Unaligned accesses are non-critical as the architecture or exception
handlers usually will fix it up at runtime. Nevertheless it may trigger
a performance penality for some architectures. For details read the
"unaligned-memory-access" kernel documentation.

The patch below ensures that the ipv6 loopback and router addresses will
always be naturally aligned. This prevents the unaligned accesses for
all architectures.

Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 034dfc5df9 ("ipv6: export in6addr_loopback to modules")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/ZbNuFM1bFqoH-UoY@p100
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30 12:43:18 +01:00
Horatiu Vultur
8e41d6644f net: micrel: Fix set/get PHC time for lan8814
When setting or getting PHC time, the higher bits of the second time (>32
bits) they were ignored. Meaning that setting some time in the future like
year 2150, it was failing to set this.

The issue can be reproduced like this:

 # phc_ctl /dev/ptp1 set 10000000000
 phc_ctl[12.290]: set clock time to 10000000000.000000000 or Sat Nov 20 17:46:40 2286

 # phc_ctl /dev/ptp1 get
 phc_ctl[15.309]: clock time is 1410065411.018055420 or Sun Sep  7 04:50:11 2014

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240126073042.1845153-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30 12:08:16 +01:00
Stephen Hemminger
3f3ebe5362 net/tun: use reciprocal_scale
Use the inline function reciprocal_scale rather than open coding
the scale optimization.  Also, remove unnecessary initializations.
Resulting compiled code is unchanged (according to godbolt).

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240126002550.169608-1-stephen@networkplumber.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30 12:02:32 +01:00
Paolo Abeni
e8166eb246 Merge branch 'ice-fix-timestamping-in-reset-process'
Tony Nguyen says:

====================
ice: fix timestamping in reset process

Karol Kolacinski says:

PTP reset process has multiple places where timestamping can end up in
an incorrect state.

This series introduces a proper state machine for PTP and refactors
a large part of the code to ensure that timestamping does not break.

The following are changes since commit 91374ba537:
  net: dsa: mt7530: support OF-based registration of switch MDIO bus
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 100GbE
====================

Link: https://lore.kernel.org/r/20240125215757.2601799-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30 11:49:07 +01:00
Jacob Keller
7a25fe5cd5 ice: stop destroying and reinitalizing Tx tracker during reset
The ice driver currently attempts to destroy and re-initialize the Tx
timestamp tracker during the reset flow. The release of the Tx tracker
only happened during CORE reset or GLOBAL reset. The ice_ptp_rebuild()
function always calls the ice_ptp_init_tx function which will allocate
a new tracker data structure, resulting in memory leaks during PF reset.

Certainly the driver should not be allocating a new tracker without
removing the old tracker data, as this results in a memory leak.
Additionally, there's no reason to remove the tracker memory during a
reset. Remove this logic from the reset and rebuild flow. Instead of
releasing the Tx tracker, flush outstanding timestamps just before we
reset the PHY timestamp block in ice_ptp_cfg_phy_interrupt().

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30 11:49:04 +01:00
Jacob Keller
803bef8178 ice: factor out ice_ptp_rebuild_owner()
The ice_ptp_reset() function uses a goto to skip past clock owner
operations if performing a PF reset or if the device is not the clock
owner. This is a bit confusing. Factor this out into
ice_ptp_rebuild_owner() instead.

The ice_ptp_reset() function is called by ice_rebuild() to restore PTP
functionality after a device reset. Follow the convention set by the
ice_main.c file and rename this function to ice_ptp_rebuild(), in the
same way that we have ice_prepare_for_reset() and
ice_ptp_prepare_for_reset().

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30 11:49:04 +01:00
Jacob Keller
1abefdca85 ice: rename ice_ptp_tx_cfg_intr
The ice_ptp_tx_cfg_intr() function sends a control queue message to
configure the PHY timestamp interrupt block. This is a very similar name
to a function which is used to configure the MAC Other Interrupt Cause
Enable register.

Rename this function to ice_ptp_cfg_phy_interrupt in order to make it
more obvious to the reader what action it performs, and distinguish it
from other similarly named functions.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30 11:49:04 +01:00
Jacob Keller
fea82915fc ice: don't check has_ready_bitmap in E810 functions
E810 hardware does not have a Tx timestamp ready bitmap. Don't check
has_ready_bitmap in E810-specific functions.
Add has_ready_bitmap check in ice_ptp_process_tx_tstamp() to stop
relying on the fact that ice_get_phy_tx_tstamp_ready() returns all 1s.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30 11:49:04 +01:00
Jacob Keller
3f2216e8db ice: rename verify_cached to has_ready_bitmap
The tx->verify_cached flag is used to inform the Tx timestamp tracking
code whether it needs to verify the cached Tx timestamp value against
a previous captured value. This is necessary on E810 hardware which does
not have a Tx timestamp ready bitmap.

In addition, we currently rely on the fact that the
ice_get_phy_tx_tstamp_ready() function returns all 1s for E810 hardware.
Instead of introducing a brand new flag, rename and verify_cached to
has_ready_bitmap, inverting the relevant checks.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30 11:49:04 +01:00
Jacob Keller
c75d5e675a ice: pass reset type to PTP reset functions
The ice_ptp_prepare_for_reset() and ice_ptp_reset() functions currently
check the pf->flags ICE_FLAG_PFR_REQ bit to determine if the current
reset is a PF reset or not.

This is problematic, because it is possible that a PF reset and a higher
level reset (CORE reset, GLOBAL reset, EMP reset) are requested
simultaneously. In that case, the driver performs the highest level
reset requested. However, the ICE_FLAG_PFR_REQ flag will still be set.

The main driver reset functions take an enum ice_reset_req indicating
which reset is actually being performed. Pass this data into the PTP
functions and rely on this instead of relying on the driver flags.

This ensures that the PTP code performs the proper level of reset that
the driver is actually undergoing.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30 11:49:04 +01:00
Jacob Keller
8293e4cb2f ice: introduce PTP state machine
Add PTP state machine so that the driver can correctly identify PTP
state around resets.
When the driver got information about ungraceful reset, PTP was not
prepared for reset and it returned error. When this situation occurs,
prepare PTP before rebuilding its structures.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30 11:49:03 +01:00
Darrick J. Wong
881f78f472 xfs: remove conditional building of rt geometry validator functions
I mistakenly turned off CONFIG_XFS_RT in the Kconfig file for arm64
variant of the djwong-wtf git branch.  Unfortunately, it took me a good
hour to figure out that RT wasn't built because this is what got printed
to dmesg:

XFS (sda2): realtime geometry sanity check failed
XFS (sda2): Metadata corruption detected at xfs_sb_read_verify+0x170/0x190 [xfs], xfs_sb block 0x0

Whereas I would have expected:

XFS (sda2): Not built with CONFIG_XFS_RT
XFS (sda2): RT mount failed

The root cause of these problems is the conditional compilation of the
new functions xfs_validate_rtextents and xfs_compute_rextslog that I
introduced in the two commits listed below.  The !RT versions of these
functions return false and 0, respectively, which causes primary
superblock validation to fail, which explains the first message.

Move the two functions to other parts of libxfs that are not
conditionally defined by CONFIG_XFS_RT and remove the broken stubs so
that validation works again.

Fixes: e14293803f ("xfs: don't allow overly small or large realtime volumes")
Fixes: a6a38f309a ("xfs: make rextslog computation consistent with mkfs")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
2024-01-30 14:04:43 +05:30
Badal Nilawar
20485e3a81 drm/hwmon: Fix abi doc warnings
This fixes warnings in xe, i915 hwmon docs:

Warning: /sys/devices/.../hwmon/hwmon<i>/curr1_crit is defined 2 times:  Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:35  Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:52
Warning: /sys/devices/.../hwmon/hwmon<i>/energy1_input is defined 2 times:  Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:54  Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:65
Warning: /sys/devices/.../hwmon/hwmon<i>/in0_input is defined 2 times:  Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:46  Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:0
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_crit is defined 2 times:  Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:22  Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:39
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_max is defined 2 times:  Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:0  Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:8
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval is defined 2 times:  Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:62  Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:30
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max is defined 2 times:  Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:14  Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:22

Use a path containing the driver name to differentiate the documentation
of each entry.

Fixes: fb1b70607f ("drm/xe/hwmon: Expose power attributes")
Fixes: 92d44a422d ("drm/xe/hwmon: Expose card reactive critical power")
Fixes: fbcdc9d3bf ("drm/xe/hwmon: Expose input voltage attribute")
Fixes: 71d0a32524 ("drm/xe/hwmon: Expose hwmon energy attribute")
Fixes: 4446fcf220 ("drm/xe/hwmon: Expose power1_max_interval")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240125113345.291118ff@canb.auug.org.au/
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240127165040.2348009-1-badal.nilawar@intel.com
2024-01-29 20:41:10 -08:00
Haiyue Wang
6668e818f9 bpf,token: Use BIT_ULL() to convert the bit mask
Replace the '(1ULL << *)' with the macro BIT_ULL(nr).

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240127134901.3698613-1-haiyue.wang@intel.com
2024-01-29 20:04:55 -08:00
Linus Torvalds
861c098164 Reverts a bad sanity check
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEIodevzQLVs53l6BhNqiEXrVAjGQFAmW3u1sACgkQNqiEXrVA
 jGQ2nQ//cyy3onYFYuAg9U/LeWgXACydzQdeY4ty00Bn9SketWqzL4MeePx9TRCP
 qDayJakMyjKYNFoLxKsRyUPagL2Xx/EWt0/G9RLM1qHZOP4xmuiI/B2kkjwsfi4w
 sgeV3wUQpTA3YlVgRwzvSAXUHJSWJQizc1rPy/e8raQXDcmLPCmAdCxGF5DRVoQU
 xw04QHvQx0azaQZKJplb0ZTbiz4dNnZcp7f6cDmdevR4ydq6yQY12/EkloF9GYl7
 2ZS9yXoXVLKbi2OIagwwRGQJz6AwUt7+pvovS/4YNs/mlUFAZzzWTmV/28KI2lgj
 2dc4W0tAoLPJuYIHD35adDZou1c6SZMMhC+7IN6P/WnpmbJ8mhNiciRY+IlAqpTC
 13PBBD1HrzYJKp2ucoLyzl1rWW0hfFCjAE5IE4EFs+fKSp+QkCtOoHd4ZwqmQYIB
 nm0BrzkdI7AkYDhOw4feHFqRa83XyGzCURG93izTM47kc9iIoL8Gclp7m7RfsYAF
 /2Lhjo52kRIuC7z1RXAc4O5Pc4YLOCw9JZCokDj1QeWEVF4oVVpLyuOmjorybh04
 UM9FvKAXc9Rna7+fi5rFWHfcz4veq0k/1l+7b7jv8Sg33PAyJNBnq0w+MGMqMNgP
 7Ow9Jsr1wuwQGEQW33hrZNCTosjzSzLDJwlh/e7Gz3BlQfkWFSg=
 =C9bX
 -----END PGP SIGNATURE-----

Merge tag 'jfs-6.8-rc3' of github.com:kleikamp/linux-shaggy

Pull jfs fix from David Kleikamp:
 "Revert a bad sanity check"

* tag 'jfs-6.8-rc3' of github.com:kleikamp/linux-shaggy:
  Revert "jfs: fix shift-out-of-bounds in dbJoin"
2024-01-29 18:45:54 -08:00
Linus Torvalds
9b7bd05beb tracing: Two small fixes for tracefs and eventfs:
- Fix register_snapshot_trigger() on allocation error
   If the snapshot fails to allocate, the register_snapshot_trigger() can
   still return success. If the call to tracing_alloc_snapshot_instance()
   returned anything but 0, it returned 0, but it should have been returning
   the error code from that allocation function.
 
 - Remove leftover code from tracefs doing a dentry walk on remount.
   The update_gid() function was called by the tracefs code on remount
   to update the gid of eventfs, but that is no longer the case, but that
   code wasn't deleted. Nothing calls it. Remove it.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZbcbZBQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qqEsAQCWTIQ/yAktP2doLvuccZbZSc5NFHZt
 hZNRHep/SMQqKwD6AlesgiXlXM39HiRTiV17jPzrL65brcTEYMJmqCaWugk=
 =8nia
 -----END PGP SIGNATURE-----

Merge tag 'trace-v6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Two small fixes for tracefs and eventfs:

   - Fix register_snapshot_trigger() on allocation error

     If the snapshot fails to allocate, the register_snapshot_trigger()
     can still return success. If the call to
     tracing_alloc_snapshot_instance() returned anything but 0, it
     returned 0, but it should have been returning the error code from
     that allocation function.

   - Remove leftover code from tracefs doing a dentry walk on remount.

     The update_gid() function was called by the tracefs code on remount
     to update the gid of eventfs, but that is no longer the case, but
     that code wasn't deleted. Nothing calls it. Remove it"

* tag 'trace-v6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracefs: remove stale 'update_gid' code
  tracing/trigger: Fix to return error if failed to alloc snapshot
2024-01-29 18:42:34 -08:00
Jakub Kicinski
59c9358349 selftests: net: add missing config for nftables-backed iptables
Modern OSes use iptables implementation with nf_tables as a backend,
e.g.:

$ iptables -V
iptables v1.8.8 (nf_tables)

Pablo points out that we need CONFIG_NFT_COMPAT to make that work,
otherwise we see a lot of:

  Warning: Extension DNAT revision 0 not supported, missing kernel module?

with DNAT being just an example here, other modules we need
include udp, TTL, length etc.

Link: https://lore.kernel.org/r/20240126201308.2903602-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-29 18:32:30 -08:00
Martin K. Petersen
3f90ac7138 Merge patch series "scsi: Allow scsi_execute users to request retries"
Mike Christie <michael.christie@oracle.com> says:

The following patches were made over Linus's tree which contains a fix
for sd which was not in Martin's branches.

The patches allow scsi_execute_cmd users to have scsi-ml retry the cmd
for it instead of the caller having to parse the error and loop
itself.

Link: https://lore.kernel.org/r/20240123002220.129141-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:21:10 -05:00
Mike Christie
25a1f7a0a1 scsi: core: Add kunit tests for scsi_check_passthrough()
Add some kunit tests for scsi_check_passthrough() so we can easily make
sure we are hitting the cases for which it's difficult to replicate in
hardware or even scsi_debug.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-20-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:55 -05:00
Mike Christie
b8c3a7bac9 scsi: ufs: Have midlayer retry start stop errors
This has the SCSI midlayer retry errors instead of driving them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-19-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:54 -05:00
Mike Christie
b72f2d149e scsi: sr: Have midlayer retry get_sectorsize() errors
This has get_sectorsize() have the SCSI midlayer retry errors instead of
driving them itself.

There is one behavior change where we no longer retry when
scsi_execute_cmd() returns < 0, but we should be ok. We don't need to retry
for failures like the queue being removed, and for the case where there are
no tags/reqs the block layer waits/retries for us. For possible memory
allocation failures from blk_rq_map_kern() we use GFP_NOIO, so retrying
will probably not help.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-18-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:54 -05:00
Mike Christie
3a7b457932 scsi: ses: Have midlayer retry scsi_execute_cmd() errors
This has ses have the SCSI midlayer retry scsi_execute_cmd() errors instead
of driving them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-17-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:54 -05:00
Mike Christie
0f11328f2f scsi: sd: Have midlayer retry read_capacity_10() errors
This has read_capacity_10() have the SCSI midlayer retry errors instead of
driving them itself.

There are 2 behavior changes with this patch:

 1. There is one behavior change where we no longer retry when
    scsi_execute_cmd() returns < 0, but we should be ok. We don't need to
    retry for failures like the queue being removed, and for the case where
    there are no tags/reqs since the block layer waits/retries for us. For
    possible memory allocation failures from blk_rq_map_kern() we use
    GFP_NOIO, so retrying will probably not help.

 2. For the specific UAs we checked for and retried, we would get
    READ_CAPACITY_RETRIES_ON_RESET retries plus whatever retries were left
    from the main loop's retries. Each UA now gets
    READ_CAPACITY_RETRIES_ON_RESET retries, and the other errors get up to
    3 retries. This is most likely ok, because
    READ_CAPACITY_RETRIES_ON_RESET is already 10 and is not based on
    anything specific like a spec or device, so the extra 3 we got from the
    main loop was probably just an accident and is not going to help.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-16-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:54 -05:00
Mike Christie
eea6ef3792 scsi: sd: Have pr commands retry UAs
It's common to get a UA when doing PR commands. It could be due to a target
restarting, transport level relogin or other PR commands like a release
causing it. The upper layers don't get the sense and in some cases have no
idea if it's a SCSI device, so this has the sd layer retry.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-15-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:54 -05:00
Mike Christie
8d24677ebb scsi: core: Have SCSI midlayer retry scsi_report_lun_scan() errors
This has scsi_report_lun_scan() have the SCSI midlayer retry errors instead
of driving them itself.

There is one behavior change where we no longer retry when
scsi_execute_cmd() returns < 0, but we should be ok. We don't need to retry
for failures like the queue being removed, and for the case where there are
no tags/reqs the block layer waits/retries for us. For possible memory
allocation failures from blk_rq_map_kern() we use GFP_NOIO, so retrying
will probably not help.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-14-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:54 -05:00
Mike Christie
21bdff48e1 scsi: core: Have midlayer retry scsi_mode_sense() UAs
This has scsi_mode_sense() have the SCSI midlayer retry UAs instead of
driving them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-13-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:54 -05:00
Mike Christie
e11f35c46e scsi: ch: Have midlayer retry ch_do_scsi() UAs
This has ch_do_scsi() have the SCSI midlayer retry UAs instead of driving
them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-12-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:54 -05:00
Mike Christie
11a2672321 scsi: ch: Remove unit_attention
unit_attention is not used so remove it.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-11-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:54 -05:00
Mike Christie
183053203d scsi: sd: Have midlayer retry sd_sync_cache() errors
This has sd_sync_cache() have the SCSI midlayer retry errors instead of
driving them itself.

There is one behavior change where we no longer retry when
scsi_execute_cmd() returns < 0, but we should be ok. We don't need to retry
for failures like the queue being removed, and for the case where there are
no tags/reqs the block layer waits/retries for us. For possible memory
allocation failures from blk_rq_map_kern() we use GFP_NOIO, so retrying
will probably not help.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-10-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:53 -05:00
Mike Christie
5dbf104736 scsi: spi: Have midlayer retry spi_execute() UAs
This has spi_execute() have the SCSI midlayer retry UAs instead of driving
them.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-9-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:53 -05:00
Mike Christie
f316ff46a0 scsi: device_handler: rdac: Have midlayer retry send_mode_select() errors
This has rdac have the SCSI midlayer retry errors instead of driving them
itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-8-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:53 -05:00
Mike Christie
fabe3ee92e scsi: device_handler: hp_sw: Have midlayer retry scsi_execute_cmd() errors
This has hp_sw have the SCSI midlayer retry scsi_execute_cmd() errors
instead of driving them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-7-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:53 -05:00
Mike Christie
c1acf38cd1 scsi: sd: Have midlayer retry sd_spinup_disk() errors
This simplifies sd_spinup_disk() so the SCSI midlayer retries errors for
it. Note that we retried every UA except Medium Not Present and also if
scsi_status_is_good() returned failed which would happen for all check
conditions. In this patch we use SCMD_FAILURE_STAT_ANY which will trigger
for the same conditions as when scsi_status_is_good() returns false and
there is status. This will cover all CCs including UAs so there is no
explicit failures array entry for UAs except for Medium Not Present which
we don't want to retry.

There is one behavior change where we no longer retry when
scsi_execute_cmd() returns < 0, but we should be ok. We don't need to retry
for failures like the queue being removed, and for the case where there are
no tags/reqs the block layer waits/retries for us. For possible memory
allocation failures from blk_rq_map_kern() we use GFP_NOIO, so retrying
will probably not help.

We do not handle the outside loop's retries because we want to sleep
between tries and we don't support that yet.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-6-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:53 -05:00
Mike Christie
1008f5776f scsi: sd: Use separate buf for START_STOP in sd_spinup_disk()
We currently reuse the cmd buffer for the TUR and START_STOP commands
which requires us to reset the buffer when retrying. This has us use
separate buffers for the 2 commands so we can make them const and I think
it makes it easier to handle for retries but does not add too much extra to
the stack use.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-5-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:53 -05:00
Mike Christie
987d7d3db0 scsi: core: Retry INQUIRY after timeout
Description from: Martin Wilck <mwilck@suse.com>:

The SCSI mid layer doesn't retry commands after DID_TIME_OUT (see
scsi_noretry_cmd()). Packet loss in the fabric can cause spurious timeouts
during SCSI device probing, causing device probing to fail. This has been
observed in FCoE uplink failover tests, for example.

This patch fixes the issue by retrying the INQUIRY.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-4-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:53 -05:00
Mike Christie
2a1f96f60a scsi: core: Have midlayer retry scsi_probe_lun() errors
This has scsi_probe_lun() ask the SCSI midlayer to retry UAs instead of
driving them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-3-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:53 -05:00
Mike Christie
994724e6b3 scsi: core: Allow passthrough to request midlayer retries
For passthrough we don't retry any error which we get a check condition
for. This results in a lot of callers driving their own retries for all
UAs, specific UAs, NOT_READY, specific sense values or any type of failure.

This adds the core code to allow passthrough users to specify what errors
they want the SCSI midlayer to retry for them. We can then convert users to
drop a lot of their sense parsing and retry handling.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-2-michael.christie@oracle.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 21:20:53 -05:00
Michal Vokáč
c44fc98f0a net: dsa: qca8k: fix illegal usage of GPIO
When working with GPIO, its direction must be set either when the GPIO is
requested by gpiod_get*() or later on by one of the gpiod_direction_*()
functions. Neither of this is done here which results in undefined
behavior on some systems.

As the reset GPIO is used right after it is requested here, it makes sense
to configure it as GPIOD_OUT_HIGH right away. With that, the following
gpiod_set_value_cansleep(1) becomes redundant and can be safely
removed.

Fixes: a653f2f538 ("net: dsa: qca8k: introduce reset via gpio feature")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1706266175-3408-1-git-send-email-michal.vokac@ysoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-29 18:14:07 -08:00
Menglong Dong
795a7dfbc3 net: tcp: accept old ack during closing
For now, the packet with an old ack is not accepted if we are in
FIN_WAIT1 state, which can cause retransmission. Taking the following
case as an example:

    Client                               Server
      |                                    |
  FIN_WAIT1(Send FIN, seq=10)          FIN_WAIT1(Send FIN, seq=20, ack=10)
      |                                    |
      |                                Send ACK(seq=21, ack=11)
   Recv ACK(seq=21, ack=11)
      |
   Recv FIN(seq=20, ack=10)

In the case above, simultaneous close is happening, and the FIN and ACK
packet that send from the server is out of order. Then, the FIN will be
dropped by the client, as it has an old ack. Then, the server has to
retransmit the FIN, which can cause delay if the server has set the
SO_LINGER on the socket.

Old ack is accepted in the ESTABLISHED and TIME_WAIT state, and I think
it should be better to keep the same logic.

In this commit, we accept old ack in FIN_WAIT1/FIN_WAIT2/CLOSING/LAST_ACK
states. Maybe we should limit it to FIN_WAIT1 for now?

Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240126040519.1846345-1-menglong8.dong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-29 18:10:45 -08:00
Jakub Kicinski
67475eb989 Merge branch 'mt7530-dsa-subdriver-improvements-act-i'
Arınç ÜNAL says:

====================
MT7530 DSA Subdriver Improvements Act I

This patch series simplifies the MT7530 DSA subdriver and improves the
logic of the support for MT7530, MT7531, and the switch on the MT7988 SoC.

I have done a simple ping test to confirm basic communication on all switch
ports on MCM and standalone MT7530, and MT7531 switch with this patch
series applied.

MT7621 Unielec, MCM MT7530:

rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb

tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000

MT7622 Bananapi, MT7531:

gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb

tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000

MT7623 Bananapi, standalone MT7530:

rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb

tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000

This patch series is the continuation of the patch series linked below.

https://lore.kernel.org/r/20230522121532.86610-1-arinc.unal@arinc9.com

v2: https://lore.kernel.org/r/20231227044347.107291-1-arinc.unal@arinc9.com
v1: https://lore.kernel.org/r/20231118123205.266819-1-arinc.unal@arinc9.com

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
====================

Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-0-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-29 18:04:14 -08:00
Arınç ÜNAL
04a22bef5f net: dsa: mt7530: do not run mt7530_setup_port5() if port 5 is disabled
There's no need to run all the code on mt7530_setup_port5() if port 5 is
disabled. The only case for calling mt7530_setup_port5() from
mt7530_setup() is when PHY muxing is enabled. That is because port 5 is not
defined as a port on the devicetree, therefore, it cannot be controlled by
phylink.

Because of this, run mt7530_setup_port5() if priv->p5_intf_sel is
P5_INTF_SEL_PHY_P0 or P5_INTF_SEL_PHY_P4. Remove the P5_DISABLED case from
mt7530_setup_port5().

Stop initialising the interface variable as the remaining cases will always
call mt7530_setup_port5() with it initialised.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-7-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-29 18:04:12 -08:00
Arınç ÜNAL
6537973f2a net: dsa: mt7530: do not set priv->p5_interface on mt7530_setup_port5()
Running mt7530_setup_port5() from mt7530_setup() used to handle all cases
of configuring port 5, including phylink.

Setting priv->p5_interface under mt7530_setup_port5() makes sure that
mt7530_setup_port5() from mt753x_phylink_mac_config() won't run.

The commit ("net: dsa: mt7530: improve code path for setting up port 5")
makes so that mt7530_setup_port5() from mt7530_setup() runs only on
non-phylink cases.

Get rid of unnecessarily setting priv->p5_interface under
mt7530_setup_port5() as port 5 phylink configuration will be done by
running mt7530_setup_port5() from mt753x_phylink_mac_config() now.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-6-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-29 18:04:12 -08:00
Arınç ÜNAL
152f8e8e74 net: dsa: mt7530: improve code path for setting up port 5
There're two code paths for setting up port 5:

mt7530_setup()
-> mt7530_setup_port5()

mt753x_phylink_mac_config()
-> mt753x_mac_config()
   -> mt7530_mac_config()
      -> mt7530_setup_port5()

Currently mt7530_setup_port5() from mt7530_setup() always runs. If port 5
is used as a CPU, DSA, or user port, mt7530_setup_port5() from
mt753x_phylink_mac_config() won't run. That is because priv->p5_interface
set on mt7530_setup_port5() will match state->interface on
mt753x_phylink_mac_config() which will stop running mt7530_setup_port5()
again.

Therefore, mt7530_setup_port5() will never run from
mt753x_phylink_mac_config().

Address this by not running mt7530_setup_port5() from mt7530_setup() if
port 5 is used as a CPU, DSA, or user port. This driver isn't in the
dsa_switches_apply_workarounds[] array so phylink will always be present.

To keep the cases where port 5 isn't controlled by phylink working as
before, preserve the mt7530_setup_port5() call from mt7530_setup().

Do not set priv->p5_intf_sel to P5_DISABLED. It is already set to that when
"priv" is allocated.

Move setting the interface to a more specific location. It's supposed to be
overwritten if PHY muxing is detected.

Improve the comment which explains the process.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-5-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-29 18:04:12 -08:00
Arınç ÜNAL
05957aa77e net: dsa: mt7530: improve comments regarding switch ports
There's no logic to numerically order the CPU ports. Just state the port
number instead.

Remove the irrelevant PHY muxing information from
mt7530_mac_port_get_caps(). Explain the supported MII modes instead.

Remove the out of place PHY muxing information from
mt753x_phylink_mac_config(). The function is for MT7530, MT7531, and the
switch on the MT7988 SoC but there's no PHY muxing on MT7531 or the switch
on the MT7988 SoC.

These comments were gradually introduced with the commits below.
commit ca366d6c88 ("net: dsa: mt7530: Convert to PHYLINK API")
commit 38f790a805 ("net: dsa: mt7530: Add support for port 5")
commit 88bdef8be9 ("net: dsa: mt7530: Extend device data ready for adding
a new hardware")
commit c288575f78 ("net: dsa: mt7530: Add the support of MT7531 switch")

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-4-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-29 18:04:11 -08:00
Arınç ÜNAL
1f4a85f2ea net: dsa: mt7530: store port 5 SGMII capability of MT7531
Introduce the p5_sgmii field to store the information for whether port 5
has got SGMII or not. Instead of reading the MT7531_TOP_SIG_SR register
multiple times, the register will be read once and the value will be
stored on the p5_sgmii field. This saves unnecessary reads of the
register.

Move the comment about MT7531AE and MT7531BE to mt7531_setup(), where the
switch is identified.

Get rid of mt7531_dual_sgmii_supported() now that priv->p5_sgmii stores the
information. Address the code where mt7531_dual_sgmii_supported() is used.

Get rid of mt7531_is_rgmii_port() which just prints the opposite of
priv->p5_sgmii.

Instead of calling mt7531_pll_setup() then returning, do not call it if
port 5 is SGMII.

Remove P5_INTF_SEL_GMAC5_SGMII. The p5_interface_select enum is supposed to
represent the mode that port 5 is being used in, not the hardware
information of port 5. Set p5_intf_sel to P5_INTF_SEL_GMAC5 instead, if
port 5 is not dsa_is_unused_port().

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-3-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-29 18:04:11 -08:00
Arınç ÜNAL
b198c9097f net: dsa: mt7530: use p5_interface_select as data type for p5_intf_sel
Use the p5_interface_select enumeration as the data type for the
p5_intf_sel field. This ensures p5_intf_sel can only take the values
defined in the p5_interface_select enumeration.

Remove the explicit assignment of 0 to P5_DISABLED as the first enum item
is automatically assigned 0.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-2-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-29 18:04:11 -08:00
Arınç ÜNAL
024d8577f5 net: dsa: mt7530: always trap frames to active CPU port on MT7530
On the MT7530 switch, the CPU_PORT field indicates which CPU port to trap
frames to, regardless of the affinity of the inbound user port.

When multiple CPU ports are in use, if the DSA conduit interface is down,
trapped frames won't be passed to the conduit interface.

To make trapping frames work including this case, implement
ds->ops->conduit_state_change() on this subdriver and set the CPU_PORT
field to the numerically smallest CPU port whose conduit interface is up.
Introduce the active_cpu_ports field to store the information of the active
CPU ports. Correct the macros, CPU_PORT is bits 4 through 6 of the
register.

Add a comment to explain frame trapping for this switch.

Currently, the driver doesn't support the use of multiple CPU ports so this
is not necessarily a bug fix.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-1-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-29 18:04:11 -08:00
Li Zhijian
8179041f80 scsi: pm8001: Convert snprintf() to sysfs_emit()
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or
sysfs_emit_at() when formatting the value to be returned to user space.

coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().

> ./drivers/scsi/pm8001/pm8001_ctl.c:883:8-16: WARNING: please use sysfs_emit

No functional change intended

CC: Jack Wang <jinpu.wang@cloud.ionos.com>
CC: James E.J. Bottomley <jejb@linux.ibm.com>
CC: Martin K. Petersen <martin.petersen@oracle.com>
CC: linux-scsi@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240116045151.3940401-32-lizhijian@fujitsu.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-29 20:40:49 -05:00