Commit graph

1,264,532 commits

Author SHA1 Message Date
Mathias Nyman
5372c65e13 xhci: process isoc TD properly when there was a transaction error mid TD.
The last TRB of a isoc TD might not trigger an event if there was
an error event for a TRB mid TD. This is seen on a NEC Corporation
uPD720200 USB 3.0 Host

After an error mid a multi-TRB TD the xHC should according to xhci 4.9.1
generate events for passed TRBs with IOC flag set if it proceeds to the
next TD. This event is either a copy of the original error, or a
"success" transfer event.

If that event is missing then the driver and xHC host get out of sync as
the driver is still expecting a transfer event for that first TD, while
xHC host is already sending events for the next TD in the list.
This leads to
"Transfer event TRB DMA ptr not part of current TD" messages.

As a solution we tag the isoc TDs that get error events mid TD.
If an event doesn't match the first TD, then check if the tag is
set, and event points to the next TD.
In that case give back the fist TD and process the next TD normally

Make sure TD status and transferred length stay valid in both cases
with and without final TD completion event.

Reported-by: Michał Pecio <michal.pecio@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20240112235205.1259f60c@foxbook/
Tested-by: Michał Pecio <michal.pecio@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240125152737.2983959-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27 16:28:35 -08:00
Mathias Nyman
09f197225c xhci: fix off by one check when adding a secondary interrupter.
The sanity check of interrupter index when adding a new interrupter is
off by one. intr_num needs to be smaller than xhci->max_interrupter to
fit the array of interrupters.

Luckily this doesn't cause any real word harm as xhci_add_interrupter()
is always called with a intr_num value smaller than xhci->max_interrupters
in any current kernel.

Should not be needed for stable as 6.7 kernel and older only supports
one interrupter, with intr_num always being zero.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-usb/e9771296-586d-456a-ac24-a82de79bb2e6@moroto.mountain/
Fixes: 4bf398e15a ("xhci: split allocate interrupter into separate alloacte and add parts")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240125152737.2983959-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27 16:28:35 -08:00
Mathias Nyman
a54a594d72 xhci: fix possible null pointer dereference at secondary interrupter removal
Don't try to remove a secondary interrupter that is known to be invalid.
Also check if the interrupter is valid inside the spinlock that protects
the array of interrupters.

Found by smatch static checker

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-usb/ffaa0a1b-5984-4a1f-bfd3-9184630a97b9@moroto.mountain/
Fixes: c99b38c412 ("xhci: add support to allocate several interrupters")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240125152737.2983959-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27 16:28:35 -08:00
Krishna Kurapati
9dc292413c usb: gadget: ncm: Fix endianness of wMaxSegmentSize variable in ecm_desc
Recent commit [1] added support for changing max segment size of the NCM
interface via configfs. But the value of segment size value stored in
ncm_opts need to be converted to little endian before saving it in
ecm_desc. Also while initialising the value of segment size in opts during
instance allocation, the value ETH_FRAME_LEN needs to be assigned directly
without any conversion as ETH_FRAME_LEN and the variable max_segment_size
are native endian. The current implementaion modifies it into little endian
thus breaking things for big endian targets.

Fix endianness while assigning these variables.
While at it, fix up some stray spaces in comments added in code.

[1]: https://lore.kernel.org/all/20231221153216.18657-1-quic_kriskura@quicinc.com/

Fixes: 1900daeefd ("usb: gadget: ncm: Add support to update wMaxSegmentSize via configfs")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20240118154910.8765-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27 16:28:28 -08:00
Prashanth K
520b391e3e usb: host: xhci-plat: Add support for XHCI_SG_TRB_CACHE_SIZE_QUIRK
Upstream commit bac1ec5514 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. Currently this quirk can only be set using
xhci private data. But there are some drivers like dwc3/host.c
which adds adds quirks using software node for xhci device.
Hence set this xhci quirk by iterating over device properties.

Cc: stable@vger.kernel.org # 5.11
Fixes: bac1ec5514 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/20240116055816.1169821-3-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27 16:28:23 -08:00
Prashanth K
817349b6d2 usb: dwc3: host: Set XHCI_SG_TRB_CACHE_SIZE_QUIRK
Upstream commit bac1ec5514 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. But the support for this quirk isn't present
in the DWC3 layer.

We will encounter this XHCI timeout/hung issue if we run iperf
loopback tests using RTL8156 ethernet adaptor on DWC3 targets
with scatter-gather enabled. This gets resolved after enabling
the XHCI_SG_TRB_CACHE_SIZE_QUIRK. This patch enables it using
the xhci device property since its needed for DWC3 controller.

In Synopsys DWC3 databook,
Table 9-3: xHCI Debug Capability Limitations
Chained TRBs greater than TRB cache size: The debug capability
driver must not create a multi-TRB TD that describes smaller
than a 1K packet that spreads across 8 or more TRBs on either
the IN TR or the OUT TR.

Cc: stable@vger.kernel.org #5.11
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240116055816.1169821-2-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27 16:28:23 -08:00
Udipto Goswami
20d03ae36e usb: gadget: ncm: Fix indentations in documentation of NCM section
Currently, the section of NCM which describes attributes are having wrong
indentation.

Fix this by following the correct format recommended.

Fixes: 1900daeefd ("usb: gadget: ncm: Add support to update wMaxSegmentSize via configfs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240108160221.743649b5@canb.auug.org.au/
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/20240108132720.7786-1-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27 16:27:58 -08:00
Erick Archer
f6f62a9a93 pinctrl: pinctrl-zynqmp: Use devm_kcalloc() instead of devm_kzalloc()
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the purpose specific devm_kcalloc() function instead of the
argument size * count in the devm_kzalloc() function.

Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240119181909.7079-1-erick.archer@gmx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-01-28 01:17:26 +01:00
Jean Thomas
8714b3414d pinctrl: mediatek: mt7981: add additional emmc groups
Add new emmc groups in the pinctrl driver for the
MediaTek MT7981 SoC:
* emmc reset, with pin 15.
* emmc 4-bit bus-width, with pins 16 to 19, and 24 to 25.
* emmc 8-bit bus-width, with pins 16 to 25.

The existing emmc_45 group is kept for legacy reasons, even
if this is the union of emmc_reset and emmc_8 groups.

Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240117145547.3354242-1-jean.thomas@wifirst.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-01-28 00:52:31 +01:00
Jean Thomas
398f914bf0 pinctrl: mediatek: mt7981: add additional uart group
Add uart1_3 (pins 26, 27) group to the pinctrl driver for the
MediaTek MT7981 SoC.

Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240117124234.3137050-1-jean.thomas@wifirst.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-01-28 00:52:08 +01:00
Randy Dunlap
13931e5d8f pinctrl: mt7986: excise kernel-doc warnings
Fix kernel-doc warnings for enum (anonymous): the enum values are not
documented, so don't indicate that the comment contains kernel-doc
notation.

pinctrl-mt7986.c:68: warning: Enum value 'GPIO_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_RT_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_RB_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_LT_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_LB_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_TR_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_TL_BASE' not described in enum '(anonymous)'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312110210.x3vxq42A-lkp@intel.com/
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc:  <linux-gpio@vger.kernel.org>
Cc: Sean Wang <sean.wang@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc:  <linux-mediatek@lists.infradead.org>
Cc:  <linux-arm-kernel@lists.infradead.org>
Link: https://lore.kernel.org/r/20240111045126.13768-1-rdunlap@infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-01-28 00:36:50 +01:00
Raymond Hackley
80daa2fa2f dt-bindings: qcom: Document new msm8916-samsung devices
Document the new following device tree bindings used in their
device trees:

- samsung,fortuna3g
- samsung,gprimeltecan
- samsung,grandprimelte
- samsung,rossa

Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240120095715.13689-2-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:15:15 -06:00
Krzysztof Kozlowski
915253bdd6 arm64: dts: qcom: sm8450-hdk: correct AMIC4 and AMIC5 microphones
Due to lack of documentation the AMIC4 and AMIC5 analogue microphones
were never actually working, so the audio routing for them was added
hoping it is correct.  It turned out not correct - their routing should
point to SWR_INPUT0 (so audio mixer TX SMIC MUX0 = SWR_MIC0) and
SWR_INPUT1 (so audio mixer TX SMIC MUX0 = SWR_MIC1), respectively.  With
proper mixer settings and fixed LPASS TX macr codec TX SMIC MUXn
widgets, this makes all microphones working on HDK8450.

Cc: stable@vger.kernel.org
Fixes: f20cf2bc3f ("arm64: dts: qcom: sm8450-hdk: add other analogue microphones")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240124121855.162730-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:11:36 -06:00
Krzysztof Kozlowski
6de995bc46 arm64: dts: qcom: sm8150: add necessary ref clock to PCIe
The PCIe nodes should get the ref clock, according to information from
Qualcomm.

Link: https://lore.kernel.org/all/20231121065440.GB3315@thinkpad/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231208105155.36097-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:38 -06:00
Konrad Dybcio
ac68c7d391 arm64: dts: qcom: sdm630: Hook up GPU cooling device
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-12-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:38 -06:00
Konrad Dybcio
6a46408928 arm64: dts: qcom: sm8550: Hook up GPU cooling device
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, unify the naming scheme of the
thermal zones across the tree while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-11-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:38 -06:00
Konrad Dybcio
36fd56ab4d arm64: dts: qcom: sm8450: Hook up GPU cooling device
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-10-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:38 -06:00
Konrad Dybcio
43c925e456 arm64: dts: qcom: sm8350: Hook up GPU cooling device
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-9-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:38 -06:00
Konrad Dybcio
fb18c89381 arm64: dts: qcom: sm8250: Hook up GPU cooling device
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-8-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:38 -06:00
Konrad Dybcio
f18c63a821 arm64: dts: qcom: sm8150: Hook up GPU cooling device
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-7-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:38 -06:00
Konrad Dybcio
834932689f arm64: dts: qcom: sm6115: Mark GPU @ 125C critical
If the GPU ever reaches this temperature, the "critical" signal shuold
definitely be propagated. Fix the wrong type.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-6-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:38 -06:00
Konrad Dybcio
de5e4e88ac arm64: dts: qcom: sm6115: Hook up GPU cooling device
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-5-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:38 -06:00
Konrad Dybcio
08b1b831e1 arm64: dts: qcom: sdm845: Hook up GPU cooling device
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-4-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:38 -06:00
Konrad Dybcio
f48cea4a6f arm64: dts: qcom: sc8180x: Hook up GPU cooling device
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-3-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:38 -06:00
Konrad Dybcio
93c4e1fb9d arm64: dts: qcom: msm8939: Hook up GPU cooling device
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-2-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:37 -06:00
Konrad Dybcio
04ee83047e arm64: dts: qcom: msm8916: Hook up GPU cooling device
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-1-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:37 -06:00
Konrad Dybcio
7d62dbd1b3 arm64: dts: qcom: x1e80100: Flush RSC sleep & wake votes
The RPMh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.

Without this, only AMC votes are being committed.

Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-x1e_fixes-v1-4-70723e08d5f6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:37 -06:00
Konrad Dybcio
f33767e3cf arm64: dts: qcom: x1e80100: Add missing system-wide PSCI power domain
Previous Qualcomm SoCs over the past couple years have used the Arm DSU
architecture, which basically unified the meaning of the "cluster" and
"system". This is however clearly not the case on X1E, as can be seen
by three separate cluster power domains.

Add the lacking system-level power domain. For now it's going to be
always-on, as no system-wide idle states are defined at the moment.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-x1e_fixes-v1-3-70723e08d5f6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 17:06:37 -06:00
Rob Herring
8796fa0f9a dt-bindings: soc/qcom: Add size constraints on "qcom,rpm-msg-ram"
The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. "qcom,rpm-msg-ram" is
the former and needs to constrain each entry to a single phandle value.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240124190744.1554625-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 16:54:45 -06:00
Chen Ni
2248bee3ea pinctrl: st: Return pinctrl_gpio_direction_output to transfer the error
Return pinctrl_gpio_direction_output() in order to transfer the error
if it fails.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240103085058.3771653-1-nichen@iscas.ac.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-01-27 23:45:22 +01:00
Krishna Kurapati
927173bf8a arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332
For qcs404 and ipq5332, certain interrupts are missing in DT.
Add them to ensure they are in accordance to bindings.

The interrupts added enable remote wakeup functionality for these SoCs.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20240125185921.5062-5-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 16:42:02 -06:00
Krishna Kurapati
7c9afa1fd8 arm64: dts: qcom: Fix hs_phy_irq for SDM670/SDM845/SM6350
For sm6350/sdm670/sdm845, although they are qusb2 phy targets, dp/dm
interrupts are used for wakeup instead of qusb2_phy irq. These targets
were part of a generation that were the last ones to implement QUSB2 PHY
and the design incorporated dedicated DP/DM interrupts which eventually
carried forward to the newer femto based targets.

Add the missing pwr_event irq for these targets. Also modify order of
interrupts in accordance to bindings update. Modifying the order of these
interrupts is harmless as the driver tries to get these interrupts from DT
by name and not by index.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20240125185921.5062-4-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 16:42:02 -06:00
Krishna Kurapati
6bf150aef2 arm64: dts: qcom: Fix hs_phy_irq for non-QUSB2 targets
On non-QUSB2 targets (like the ones that use femto phys, M31 phy, eusb2
phy), many of the QCOM DTs are missing the IRQ for either hs_phy_irq or
pwr_event. In one case, the hs_phy_irq was incorrectly defined with the
latter's IRQ number. Since the DT must describe the hw whether or not
the driver uses these interrupts, fix and add the missing entries in order
to describe the HW completely and accurately.

Also modify order of interrupts in accordance to bindings update.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20240125185921.5062-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 16:42:02 -06:00
Krishna Kurapati
2c6597c72e arm64: dts: qcom: Fix hs_phy_irq for QUSB2 targets
On several QUSB2 Targets, the hs_phy_irq mentioned is actually
qusb2_phy interrupt specific to QUSB2 PHY's. Rename hs_phy_irq
to qusb2_phy for such targets.

In actuality, the hs_phy_irq is also present in these targets, but
kept in for debug purposes in hw test environments. This is not
triggered by default and its functionality is mutually exclusive
to that of qusb2_phy interrupt.

Add missing hs_phy_irq's, pwr_event irq's for QUSB2 PHY targets.
Add missing ss_phy_irq on some targets which allows for remote
wakeup to work on a Super Speed link.

Also modify order of interrupts in accordance to bindings update.
Since driver looks up for interrupts by name and not by index, it
is safe to modify order of these interrupts in the DT.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20240125185921.5062-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 16:42:02 -06:00
Neil Armstrong
b5e25ded27 arm64: dts: qcom: sm8550: add support for the SM8550-HDK board
The SM8550-HDK is an embedded development platforms for the
Snapdragon 8 Gen 2 SoC aka SM8550, with the following features:
- Qualcomm SM8550 SoC
- 16GiB On-board LPDDR5
- On-board WiFi 7 + Bluetooth 5.3/BLE
- On-board UFS4.0
- M.2 Key B+M Gen3x2 PCIe Slot
- HDMI Output
- USB-C Connector with DP Almode & Audio Accessory mode
- Micro-SDCard Slot
- Audio Jack with Playback and Microphone
- 2 On-board Analog microphones
- 2 On-board Speakers
- 96Boards Compatible Low-Speed and High-Speed connectors [1]
  - For Camera, Sensors and external Display cards
  - Compatible with the Linaro Debug board [2]
- SIM Slot for Modem
- Debug connectors
- 6x On-Board LEDs

Product Page: [3]

[1] https://www.96boards.org/specifications/
[2] https://git.codelinaro.org/linaro/qcomlt/debugboard
[3] https://www.lantronix.com/products/snapdragon-8-gen-2-mobile-hardware-development-kit/

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240125-topic-sm8550-upstream-hdk8550-v3-2-73bb5ef11cf8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 16:38:12 -06:00
Neil Armstrong
507cad6e0f dt-bindings: arm: qcom: Document the HDK8550 board
Document the Qualcomm SM8550 based HDK (Hardware Development Kit)
embedded development platform designed by Qualcomm and sold by Lantronix.

[1] https://www.lantronix.com/products/snapdragon-8-gen-2-mobile-hardware-development-kit/

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240125-topic-sm8550-upstream-hdk8550-v3-1-73bb5ef11cf8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-27 16:38:12 -06:00
Ian Rogers
becc24e96a perf vendor events intel: Alderlake/sapphirerapids metric fixes
As events are deduplicated by name, ensure PMU prefixes are always
used in metrics. Previously they may be missed on the first event in a
formula.

Update metric constraints for architectures with topdown l2 events.

Conversion script updated in:
https://github.com/intel/perfmon/pull/128

Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/lkml/ZZam-EG-UepcXtWw@kernel.org/
Link: https://lore.kernel.org/r/20240104231903.775717-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-01-27 16:31:41 -03:00
Arnaldo Carvalho de Melo
e30dca91e5 tools headers UAPI: Sync kvm headers with the kernel sources
To pick the changes in:

  a5d3df8ae1 ("KVM: remove deprecated UAPIs")
  6d72283526 ("KVM x86/xen: add an override for PVCLOCK_TSC_STABLE_BIT")
  89ea60c2c7 ("KVM: x86: Add support for "protected VMs" that can utilize private memory")
  8dd2eee9d5 ("KVM: x86/mmu: Handle page fault for private memory")
  a7800aa80e ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
  5a475554db ("KVM: Introduce per-page memory attributes")
  16f95f3b95 ("KVM: Add KVM_EXIT_MEMORY_FAULT exit to report faults to userspace")
  bb58b90b1a ("KVM: Introduce KVM_SET_USER_MEMORY_REGION2")
  3f9cd0ca84 ("KVM: arm64: Allow userspace to get the writable masks for feature ID registers")

That automatically adds support for some new ioctls and remove a bunch
of deprecated ones.

This ends up making the new binary to forget about the deprecated one,
so when used in an older system it will not be able to resolve those
codes to strings.

  $ tools/perf/trace/beauty/kvm_ioctl.sh > before
  $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
  $ tools/perf/trace/beauty/kvm_ioctl.sh > after
  $ diff -u before after
  --- before	2024-01-27 14:48:16.523014020 -0300
  +++ after	2024-01-27 14:48:24.183932866 -0300
  @@ -14,6 +14,7 @@
   	[0x46] = "SET_USER_MEMORY_REGION",
   	[0x47] = "SET_TSS_ADDR",
   	[0x48] = "SET_IDENTITY_MAP_ADDR",
  +	[0x49] = "SET_USER_MEMORY_REGION2",
   	[0x60] = "CREATE_IRQCHIP",
   	[0x61] = "IRQ_LINE",
   	[0x62] = "GET_IRQCHIP",
  @@ -22,14 +23,8 @@
   	[0x65] = "GET_PIT",
   	[0x66] = "SET_PIT",
   	[0x67] = "IRQ_LINE_STATUS",
  -	[0x69] = "ASSIGN_PCI_DEVICE",
   	[0x6a] = "SET_GSI_ROUTING",
  -	[0x70] = "ASSIGN_DEV_IRQ",
   	[0x71] = "REINJECT_CONTROL",
  -	[0x72] = "DEASSIGN_PCI_DEVICE",
  -	[0x73] = "ASSIGN_SET_MSIX_NR",
  -	[0x74] = "ASSIGN_SET_MSIX_ENTRY",
  -	[0x75] = "DEASSIGN_DEV_IRQ",
   	[0x76] = "IRQFD",
   	[0x77] = "CREATE_PIT2",
   	[0x78] = "SET_BOOT_CPU_ID",
  @@ -66,7 +61,6 @@
   	[0x9f] = "GET_VCPU_EVENTS",
   	[0xa0] = "SET_VCPU_EVENTS",
   	[0xa3] = "ENABLE_CAP",
  -	[0xa4] = "ASSIGN_SET_INTX_MASK",
   	[0xa5] = "SIGNAL_MSI",
   	[0xa6] = "GET_XCRS",
   	[0xa7] = "SET_XCRS",
  @@ -97,6 +91,8 @@
   	[0xcd] = "SET_SREGS2",
   	[0xce] = "GET_STATS_FD",
   	[0xd0] = "XEN_HVM_EVTCHN_SEND",
  +	[0xd2] = "SET_MEMORY_ATTRIBUTES",
  +	[0xd4] = "CREATE_GUEST_MEMFD",
   	[0xe0] = "CREATE_DEVICE",
   	[0xe1] = "SET_DEVICE_ATTR",
   	[0xe2] = "GET_DEVICE_ATTR",
  $

This silences these perf build warnings:

  Warning: Kernel ABI header differences:
    diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
    diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chao Peng <chao.p.peng@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jing Zhang <jingzhangos@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Durrant <pdurrant@amazon.com>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/lkml/ZbVLbkngp4oq13qN@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-01-27 15:29:47 -03:00
Linus Torvalds
8a696a29c6 platform-drivers-x86 for v6.8-2
Highlights:
  -  WMI bus driver fixes
  -  Second attempt (previously reverted) at P2SB PCI rescan deadlock fix
  -  AMD PMF driver improvements
  -  MAINTAINERS updates
  -  Misc. other small fixes and hw-id additions
 
 The following is an automated git shortlog grouped by driver:
 
 MAINTAINERS:
  -  remove defunct acpi4asus project info from asus notebooks section
  -  add Luke Jones as maintainer for asus notebooks
  -  Remove Perry Yuan as DELL WMI HARDWARE PRIVACY SUPPORT maintainer
 
 intel-uncore-freq:
  -  Fix types in sysfs callbacks
 
 intel-wmi-sbl-fw-update:
  -  Fix function name in error message
 
 p2sb:
  -  Use pci_resource_n() in p2sb_read_bar0()
  -  Allow p2sb_bar() calls during PCI device probe
 
 platform/mellanox:
  -  mlxbf-pmc: Fix offset calculation for crspace events
  -  mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full
 
 platform/x86/amd/pmf:
  -  Fix memory leak in amd_pmf_get_pb_data()
  -  Get ambient light information from AMD SFH driver
  -  Get Human presence information from AMD SFH driver
 
 platform/x86/intel/ifs:
  -  Call release_firmware() when handling errors.
 
 silicom-platform:
  -  Add missing "Description:" for power_cycle sysfs attr
 
 touchscreen_dmi:
  -  Add info for the TECLAST X16 Plus tablet
 
 wmi:
  -  Fix wmi_dev_probe()
  -  Fix notify callback locking
  -  Decouple legacy WMI notify handlers from wmi_block_list
  -  Return immediately if an suitable WMI event is found
  -  Fix error handling in legacy WMI notify handler functions
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmW1JScUHGhkZWdvZWRl
 QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xNVwf/YXSuNEw+ztLH0pEySBUATHrcIbO7
 gOpW2ZISf6IzRe7HFw7Ea1IJxrvysPn8VEribT3Sot9Ka+Pzd6H/TVA64sfyE7oG
 wEke2Uxpnfie65Yo2IYNADhfLTOyAL7mvchScQz5hTE+gBq5Fdac2ykK+ox1dpTs
 BqPg1/yG06L1SRX2Id0UNNYGMBsmjUH6v2b+M8Rcba+qcdznGMRe7l8T1Q2fY+nl
 P6+tz3rYdfrGn1j+35Wo2bgKaB8l6rrtOscIvpke+CxZ95+6UxqZfLOBCg8u/njA
 QbWqfZGjmbRGrbNo4C3fAHjj6SzQNyNfsm4gd4eJzl8X1CR9gzM8kb/xmg==
 =yoe7
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - WMI bus driver fixes

 - Second attempt (previously reverted) at P2SB PCI rescan deadlock fix

 - AMD PMF driver improvements

 - MAINTAINERS updates

 - Misc other small fixes and hw-id additions

* tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet
  platform/x86/intel/ifs: Call release_firmware() when handling errors.
  platform/x86/amd/pmf: Fix memory leak in amd_pmf_get_pb_data()
  platform/x86/amd/pmf: Get ambient light information from AMD SFH driver
  platform/x86/amd/pmf: Get Human presence information from AMD SFH driver
  platform/mellanox: mlxbf-pmc: Fix offset calculation for crspace events
  platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full
  MAINTAINERS: remove defunct acpi4asus project info from asus notebooks section
  MAINTAINERS: add Luke Jones as maintainer for asus notebooks
  MAINTAINERS: Remove Perry Yuan as DELL WMI HARDWARE PRIVACY SUPPORT maintainer
  platform/x86: silicom-platform: Add missing "Description:" for power_cycle sysfs attr
  platform/x86: intel-wmi-sbl-fw-update: Fix function name in error message
  platform/x86: p2sb: Use pci_resource_n() in p2sb_read_bar0()
  platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  platform/x86: intel-uncore-freq: Fix types in sysfs callbacks
  platform/x86: wmi: Fix wmi_dev_probe()
  platform/x86: wmi: Fix notify callback locking
  platform/x86: wmi: Decouple legacy WMI notify handlers from wmi_block_list
  platform/x86: wmi: Return immediately if an suitable WMI event is found
  platform/x86: wmi: Fix error handling in legacy WMI notify handler functions
2024-01-27 09:48:55 -08:00
Linus Torvalds
955340433a LoongArch fixes for v6.8-rc2
-----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmW0uEAWHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImeqGUEACf2JP1cPmaWfZZpQtpRwD2umdm
 Tk1esuMqfvS5RqUqZUKMMc/fHe2JxgZ6J7NZFoAzrd3lZTOxfEjv0hZGEui6Sb8a
 mnOszrPX3fbP45ViIu7HqUOnkluEofaeTZmAATuDlHroXvvpXV8uGFDyujH085iG
 ZhpKurE5aT3yxGphHguFLBH14ZXIAHAZHR0NUFs54shAcGV5n2HZipbN7S081iwv
 RC+ah61Ls93grebC1PxvtvbTPrvEUJo00eqHErWn6u72Ek7bbYpoWvcmxyXXHWAH
 ETBf9MmMEQccTRCD81wpzWdf1/TdZ2tsrifh5efCHCxhu5flu3RxFygRBR5lNMtS
 +IdiJnHjZ0xF+tXDGBNiFQ8+b+BvSQ58haj30ob6dFs16e4WMbP6lrACjZA6rBEl
 Ks5qDwFoeGKxDyJmBflsXK5CUgTFHFD3STPHSZ6o4ChSoZRaiC6W7QxdwHLrcacc
 51ThKKUQsaWiR8sa9ag7svCJYcaXzurQtXPsvi6L5VfoT5Rk0HzxbczVoi08M/+z
 t4V03sEIYtcbRCHblKupz20A9kRXCh7dq/ShrGqZ1A0T2K3n7R+3ol9a5VjKdaJ3
 y9lQDYoEpaqFM/G0zcaUpw5ueGoynO2g0Pq6b+U/wWvwWFnAQQAHgtQpaZvscBsw
 D9ExPRWgsDtXQWzRfg==
 =3XNw
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix boot failure on machines with more than 8 nodes, and fix two build
  errors about KVM"

* tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: KVM: Add returns to SIMD stubs
  LoongArch: KVM: Fix build due to API changes
  LoongArch/smp: Call rcutree_report_cpu_starting() at tlb_init()
2024-01-27 09:44:40 -08:00
Linus Torvalds
cd2286fc57 Bug fixes for 6.8-rc2:
* Fix read only mounts when using fsopen mount API
 
 Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZbCl9wAKCRAH7y4RirJu
 9AbqAP43B2qBRn2o16MrK3qwGTNOvecck1Nze1klaQIKnwyTAQD7BbcpuNlLOKqZ
 7HkZcaXnyIrzNm1DrnDFX1zIagDY+QA=
 =S9zy
 -----END PGP SIGNATURE-----

Merge tag 'xfs-6.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fix from Chandan Babu:

 - Fix read only mounts when using fsopen mount API

* tag 'xfs-6.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: read only mounts with fsopen mount API are busted
2024-01-27 09:17:01 -08:00
Linus Torvalds
064a4a5bfa bcachefs fixes for v6.8-rc2
- fix for REQ_OP_FLUSH usage; this fixes filesystems going read only
    with -EOPNOTSUPP from the block layer.
 
    (this really should have gone in with the block layer patch causing
    the -EOPNOTSUPP, or should have gone in before).
  - fix an allocation in non-sleepable context
  - fix one source of srcu lock latency, on devices with terrible discard
    latency
  - fix a reattach_inode() issue in fsck
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmW0PmoACgkQE6szbY3K
 bnZpbQ//V2tTJOvnhfMNn7n0oq9TVRJnSmhuredkE4arhWgyfx8RF81mUajAS5GW
 u4S+i+g5BZDgb75vnAAXKxzCwr5TLAoOBU9jhKROzXykqgoyQPyNSAHxa9vHDEmp
 hfaML1ZuAq54N6ahuEhFjEGaImqF0Jv1K/F3pqDeBm1ulW+VDyLzLihKm/CJs7bp
 m9B35QyPx7/dqTrqCrmKPY0LH3lhv6DT3GbCS8D6B3OPgoqFBYvgnMj+uHiS4gAo
 pSqkMnoIFatTOuQYJXrLJsYUc72WHdXjZuAVmr0pGWyICZmOdGdrayYo48Xa/nBE
 a8qVdo8SWwn8zJKzZPxXK6ViYg8Gn7xCWx3V30SiPaLhcQddwlyRS+QemX3nNsmm
 4w9Q/QwhfjJ1624vLH850ajfbIjYoUwhmIeVt1UYO7adBvNCzmDFI+HZqqWPP3Z1
 FhZsjTs8JzByLMFL9N8z4Iy7DZ2it1EhoW+RoptvYp0K46NREeh1reDmiI9/RWp7
 62IaX8/fqiiakXfflpPa0gXo+S/aZfaDy6QL9xSOLLf/7tbPwnmEZVw0V6imBTy6
 E0ja7HDeBzlGk/IqMZGDva3FPGJZxjFQPBemiHMGYvMvm0qVPKum5behnZFRq6hc
 Z2SWm/jnDo4J/K9156GrWWvLU6WhZbt/1twp7YEdhefEjKRLH7g=
 =6Xv0
 -----END PGP SIGNATURE-----

Merge tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefs

Pull bcachefs fixes from Kent Overstreet:

 - fix for REQ_OP_FLUSH usage; this fixes filesystems going read only
   with -EOPNOTSUPP from the block layer.

   (this really should have gone in with the block layer patch causing
   the -EOPNOTSUPP, or should have gone in before).

 - fix an allocation in non-sleepable context

 - fix one source of srcu lock latency, on devices with terrible discard
   latency

 - fix a reattach_inode() issue in fsck

* tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: __lookup_dirent() works in snapshot, not subvol
  bcachefs: discard path uses unlock_long()
  bcachefs: fix incorrect usage of REQ_OP_FLUSH
  bcachefs: Add gfp flags param to bch2_prt_task_backtrace()
2024-01-27 09:11:52 -08:00
Linus Torvalds
8c6f6a7646 2 ksmbd fixes, including one for stable
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmWz98EACgkQiiy9cAdy
 T1HlJgv/YrHQn08KHVUEC35U4XAtWVRKP6UsMZgj3ru7F+MurHKamhuyzd8WxhFE
 2WVnnx0frue8wvFNd3GTnivWrW3zLu3QbeG2RjdHD3Z58uKb/fkq8K4HU1PAYpLC
 6pLGQ2qaKcTzqOUs65PVsBtL7Eb5OG3kWjR5tCBohIB9uWo4weiKcRDDryhSZZr9
 p5TfJ0bbttz60XUHZ8pCgj4cjsb9DScqalYrvMIuUIzjdKg3rgSXsr4mOPPPyqRB
 1allNGBosL9iBXuSRY3boYivEI+tyZq8UH3KPQKd0XV1qzaWTg/f8wNb0CdBWGXQ
 xeTRPBc9CswhNEWVWgpq4zbxBhkUF9ZXgCJlnca/OgPL6inuST+FAB9CKCd4kPrx
 hxXHrfzYAvjUvZvtK32c64J4BF9EcJ8jQtdnheezy7FdKZuuCZCRss35MVwCd38v
 DaqqYb4Etfmj3HjlyxYxU+rNsk/lvZr/ZMixQ9sIIDJFjsYCRh4rH1YmGN2DaVOP
 tmLP3/w/
 =FipL
 -----END PGP SIGNATURE-----

Merge tag '6.8-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd

Pull smb server fixes from Steve French:

 - Fix netlink OOB

 - Minor kernel doc fix

* tag '6.8-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix global oob in ksmbd_nl_policy
  smb: Fix some kernel-doc comments
2024-01-27 09:06:56 -08:00
Linus Torvalds
d1bba17e20 Nine cifs/smb client fixes
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmW0KtkACgkQiiy9cAdy
 T1FrpQwAidzdBR4S/Y62GsNThZvB2MevanymoVkI/+0FvHL8FxRIn4V5DMOeNmRb
 l+nQiSEFW/POUwTM4fq0mJHhG3xrVjPghBf7zbr2qyoM9FiP5HfEjxX/44LlsuVT
 dtvaqdiq27ZJ7egyZG6wpXxQ7Sg3octBiAiRC53Yq7dssdSQC4e+VOXRdRCZAkiq
 oH5mYlP5st8HVbEMhSOrmye88LVf78KYlF1rhgnGASXSS6MWMQaPyM795r9AoOrB
 q5FtRrOz9AVYMizZgJ2ROVSkWtXM/cw6GmMHueYEQeovR8j5SrgW75PNTwZMfEnk
 VzXhuBs6DY2i9fP0aMn/MHLGRBelzVJ7O6WgPrIBsmSDQ9Va/23fgoAajJqSdHfr
 pAKRKMsNlmZDS/ROXIYeHnjNVs7dPXjnNun2VKgcpbDWxX0IYiwgf/hCMDGSjtVD
 ZEktOTv/RmH+fIgvY045wb4DCx+sGucavMiR2pQEbmtWNcNvId5Tu8/Li3z6g1rp
 i0s4K3g0
 =fPE4
 -----END PGP SIGNATURE-----

Merge tag '6.8-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:
 "Nine cifs/smb client fixes

   - Four network error fixes (three relating to replays of requests
     that need to be retried, and one fixing some places where we were
     returning the wrong rc up the stack on network errors)

   - Two multichannel fixes including locking fix and case where subset
     of channels need reconnect

   - netfs integration fixup: share remote i_size with netfslib

   - Two small cleanups (one for addressing a clang warning)"

* tag '6.8-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix stray unlock in cifs_chan_skip_or_disable
  cifs: set replay flag for retries of write command
  cifs: commands that are retried should have replay flag set
  cifs: helper function to check replayable error codes
  cifs: translate network errors on send to -ECONNABORTED
  cifs: cifs_pick_channel should try selecting active channels
  cifs: Share server EOF pos with netfslib
  smb: Work around Clang __bdos() type confusion
  smb: client: delete "true", "false" defines
2024-01-27 09:02:42 -08:00
Nathan Chancellor
397586506c modpost: Add '.ltext' and '.ltext.*' to TEXT_SECTIONS
After the linked LLVM change, building ARCH=um defconfig results in a
segmentation fault in modpost. Prior to commit a23e7584ec ("modpost:
unify 'sym' and 'to' in default_mismatch_handler()"), there was a
warning:

  WARNING: modpost: vmlinux.o(__ex_table+0x88): Section mismatch in reference to the .ltext:(unknown)
  WARNING: modpost: The relocation at __ex_table+0x88 references
  section ".ltext" which is not in the list of
  authorized sections.  If you're adding a new section
  and/or if this reference is valid, add ".ltext" to the
  list of authorized sections to jump to on fault.
  This can be achieved by adding ".ltext" to
  OTHER_TEXT_SECTIONS in scripts/mod/modpost.c.

The linked LLVM change moves global objects to the '.ltext' (and
'.ltext.*' with '-ffunction-sections') sections with '-mcmodel=large',
which ARCH=um uses. These sections should be handled just as '.text'
and '.text.*' are, so add them to TEXT_SECTIONS.

Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/1981
Link: 4bf8a68895
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-01-28 01:13:37 +09:00
Nathan Chancellor
846cfbeed0 um: Fix adding '-no-pie' for clang
The kernel builds with -fno-PIE, so commit 883354afbc ("um: link
vmlinux with -no-pie") added the compiler linker flag '-no-pie' via
cc-option because '-no-pie' was only supported in GCC 6.1.0 and newer.

While this works for GCC, this does not work for clang because cc-option
uses '-c', which stops the pipeline right before linking, so '-no-pie'
is unconsumed and clang warns, causing cc-option to fail just as it
would if the option was entirely unsupported:

  $ clang -Werror -no-pie -c -o /dev/null -x c /dev/null
  clang-16: error: argument unused during compilation: '-no-pie' [-Werror,-Wunused-command-line-argument]

A recent version of clang exposes this because it generates a relocation
under '-mcmodel=large' that is not supported in PIE mode:

  /usr/sbin/ld: init/main.o: relocation R_X86_64_32 against symbol `saved_command_line' can not be used when making a PIE object; recompile with -fPIE
  /usr/sbin/ld: failed to set dynamic section sizes: bad value
  clang: error: linker command failed with exit code 1 (use -v to see invocation)

Remove the cc-option check altogether. It is wasteful to invoke the
compiler to check for '-no-pie' because only one supported compiler
version does not support it, GCC 5.x (as it is supported with the
minimum version of clang and GCC 6.1.0+). Use a combination of the
gcc-min-version macro and CONFIG_CC_IS_CLANG to unconditionally add
'-no-pie' with CONFIG_LD_SCRIPT_DYN=y, so that it is enabled with all
compilers that support this. Furthermore, using gcc-min-version can help
turn this back into

  LINK-$(CONFIG_LD_SCRIPT_DYN) += -no-pie

when the minimum version of GCC is bumped past 6.1.0.

Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/1982
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-01-28 01:13:37 +09:00
Zhang Bingwu
6c20faec8f kbuild: defconf: use SRCARCH to find merged configs
For some ARCH values, SRCARCH, which should be used for finding arch/
subdirectory, is different from ARCH.

Signed-off-by: Zhang Bingwu <xtexchooser@duck.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-01-28 01:13:37 +09:00
Konstantin Aladyshev
915644189c hwmon: (pmbus/mp2975) Correct comment inside 'mp2975_read_byte_data'
The current driver code no longer perfrom internal conversion from
VID to direct. Instead it configures READ_VOUT using MFR_DC_LOOP_CTRL.
Correct the comment message inside the 'mp2975_read_byte_data'
function to match the driver logic.

Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Fixes: c60fe56c16 ("hwmon: (pmbus/mp2975) Fix driver initialization for MP2975 device")
Link: https://lore.kernel.org/r/20240127154844.989-1-aladyshev22@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-27 08:03:18 -08:00
David Schiller
6db053cd94 staging: iio: ad5933: fix type mismatch regression
Commit 4c3577db3e ("Staging: iio: impedance-analyzer: Fix sparse
warning") fixed a compiler warning, but introduced a bug that resulted
in one of the two 16 bit IIO channels always being zero (when both are
enabled).

This is because int is 32 bits wide on most architectures and in the
case of a little-endian machine the two most significant bytes would
occupy the buffer for the second channel as 'val' is being passed as a
void pointer to 'iio_push_to_buffers()'.

Fix by defining 'val' as u16. Tested working on ARM64.

Fixes: 4c3577db3e ("Staging: iio: impedance-analyzer: Fix sparse warning")
Signed-off-by: David Schiller <david.schiller@jku.at>
Link: https://lore.kernel.org/r/20240122134916.2137957-1-david.schiller@jku.at
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-01-27 16:00:02 +00:00
Dimitri Fedrau
a69eeaad09 iio: humidity: hdc3020: fix temperature offset
The temperature offset should be negative according to the datasheet.
Adding a minus to the existing offset results in correct temperature
calculations.

Fixes: c9180b8e39 ("iio: humidity: Add driver for ti HDC302x humidity sensors")
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240126135226.3977904-1-dima.fedrau@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-01-27 14:40:07 +00:00