If get_unused_fd_flags() fails, the error handling is incomplete because
bprm->cred is already set to NULL, and therefore free_bprm will not
unlock the cred_guard_mutex. Note there are two error conditions which
end up here, one before and one after bprm->cred is cleared.
Fixes: b8a61c9e7b ("exec: Generic execfd support")
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/AS8P193MB128517ADB5EFF29E04389EDAE4752@AS8P193MB1285.EURP193.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Add i.MX93/95 flexspi compatible strings, which are compatible with
i.MX8MM
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Han Xu <han.xu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://msgid.link/r/20240122091510.2077498-2-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add i.MX95 LPSPI compatible string, same as i.MX93 compatible with
i.MX7ULP
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://msgid.link/r/20240122091510.2077498-1-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Let logitech-hidpp driver claim Logitech G Pro X Superlight 2.
Reported-by: Marcus Rückert <darix@opensu.se>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Minor code style alignment cleanup for perf_data__switch() and
perf_data__write().
No functional change.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-4-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In pipe mode, no need to switch perf data output, therefore,
'--timestamp-filename' option should not take effect.
Check the conflict before recording and output WARNING.
In this case, the check pipe mode in perf_data__switch() can be removed.
Before:
# perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Dump -.2024011812110182 ]
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'cycles:P'
# Event count (approx.): 2176784359
#
# Overhead Command Shared Object Symbol
# ........ ....... .................... ......................................
#
97.83% perf perf [.] noploop
#
# (Tip: Print event counts in CSV format with: perf stat -x,)
#
After:
# perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1
WARNING: --timestamp-filename option is not available in pipe mode.
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'cycles:P'
# Event count (approx.): 2185575421
#
# Overhead Command Shared Object Symbol
# ........ ....... ..................... .............................................
#
97.75% perf perf [.] noploop
#
# (Tip: Profiling branch (mis)predictions with: perf record -b / perf report)
#
Fixes: ecfd7a9c04 ("perf record: Add '--timestamp-filename' option to append timestamp to output file name")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-3-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf_data__switch() may not assign a legal value to 'new_filename'.
In this case, 'new_filename' uses the on-stack value, which may cause a
incorrect free and unexpected result.
Fixes: 03724b2e9c ("perf record: Allow to limit number of reported perf.data files")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-2-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The DWARF location expression can be fairly complex and it'd be hard
to match it with the condition correctly. So let's be conservative
and only allow simple expressions. For now it just checks the first
operation in the list. The following operations looks ok:
* DW_OP_stack_value
* DW_OP_deref_size
* DW_OP_deref
* DW_OP_piece
To refuse complex (and unsupported) location expressions, add
check_allowed_ops() to compare the rest of the list. It seems earlier
result contained those unsupported expressions. For example, I found
some local struct variable is placed like below.
<2><43d1517>: Abbrev Number: 62 (DW_TAG_variable)
<43d1518> DW_AT_location : 15 byte block: 91 50 93 8 91 78 93 4 93 84 8 91 68 93 4
(DW_OP_fbreg: -48; DW_OP_piece: 8;
DW_OP_fbreg: -8; DW_OP_piece: 4;
DW_OP_piece: 1028;
DW_OP_fbreg: -24; DW_OP_piece: 4)
Another example is something like this.
0057c8be ffffffffffffffff ffffffff812109f0 (base address)
0057c8ce ffffffff812112b5 ffffffff812112c8 (DW_OP_breg3 (rbx): 0;
DW_OP_constu: 18446744073709551612;
DW_OP_and;
DW_OP_stack_value)
It should refuse them. After the change, the stat shows:
Annotate data type stats:
total 294, ok 158 (53.7%), bad 136 (46.3%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
53 : no_var
14 : no_typeinfo
7 : bad_offset
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240117062657.985479-10-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Local variables are allocated in the stack and the location list
should look like base register(s) and an offset. Extend the
die_find_variable_by_reg() to handle the following expressions
* DW_OP_breg{0..31}
* DW_OP_bregx
* DW_OP_fbreg
Ususally DWARF subprogram entries have frame base information and
use it to locate stack variable like below:
<2><43d1575>: Abbrev Number: 62 (DW_TAG_variable)
<43d1576> DW_AT_location : 2 byte block: 91 7c (DW_OP_fbreg: -4) <--- here
<43d1579> DW_AT_name : (indirect string, offset: 0x2c00c9): i
<43d157d> DW_AT_decl_file : 1
<43d157e> DW_AT_decl_line : 78
<43d157f> DW_AT_type : <0x43d19d7>
I found some differences on saving the frame base between gcc and clang.
The gcc uses the CFA to get the base so it needs to check the current
frame's CFI info. In this case, stack offset needs to be adjusted from
the start of the CFA.
<1><1bb8d>: Abbrev Number: 102 (DW_TAG_subprogram)
<1bb8e> DW_AT_name : (indirect string, offset: 0x74d41): kernel_init
<1bb92> DW_AT_decl_file : 2
<1bb92> DW_AT_decl_line : 1440
<1bb94> DW_AT_decl_column : 18
<1bb95> DW_AT_prototyped : 1
<1bb95> DW_AT_type : <0xcc>
<1bb99> DW_AT_low_pc : 0xffffffff81bab9e0
<1bba1> DW_AT_high_pc : 0x1b2
<1bba9> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <------ here
<1bbab> DW_AT_call_all_calls: 1
<1bbab> DW_AT_sibling : <0x1bf5a>
While clang sets it to a register directly and it can check the register
and offset in the instruction directly.
<1><43d1542>: Abbrev Number: 60 (DW_TAG_subprogram)
<43d1543> DW_AT_low_pc : 0xffffffff816a7c60
<43d154b> DW_AT_high_pc : 0x98
<43d154f> DW_AT_frame_base : 1 byte block: 56 (DW_OP_reg6 (rbp)) <---------- here
<43d1551> DW_AT_GNU_all_call_sites: 1
<43d1551> DW_AT_name : (indirect string, offset: 0x3bce91): foo
<43d1555> DW_AT_decl_file : 1
<43d1556> DW_AT_decl_line : 75
<43d1557> DW_AT_prototyped : 1
<43d1557> DW_AT_type : <0x43c7332>
<43d155b> DW_AT_external : 1
Also it needs to update the offset after finding the type like global
variables since the offset was from the frame base. Factor out
match_var_offset() to check global and local variables in the same way.
The type stats are improved too:
Annotate data type stats:
total 294, ok 160 (54.4%), bad 134 (45.6%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
51 : no_var
14 : no_typeinfo
7 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-9-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The die_get_cfa() is to get frame base register and offset at the given
instruction address (pc). This info will be used to locate stack
variables which have location expression using DW_OP_fbreg.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-8-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Global variables are accessed using PC-relative address so it needs to
be handled separately. The PC-rel addressing is detected by using
DWARF_REG_PC. On x86, %rip register would be used.
The address can be calculated using the ip and offset in the
instruction. But it should start from the next instruction so add
calculate_pcrel_addr() to do it properly.
But global variables defined in a different file would only have a
declaration which doesn't include a location list. So it first tries
to get the type info using the address, and then looks up the variable
declarations using name. The name of global variables should be get
from the symbol table. The declaration would have the type info.
So extend find_var_type() to take both address and name for global
variables.
The stat is now looks like:
Annotate data type stats:
total 294, ok 153 (52.0%), bad 141 (48.0%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
61 : no_var
10 : no_typeinfo
8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-7-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Extend find_data_type_die() to find data type from PC-relative address
using die_find_variable_by_addr(). Users need to pass the address for
the (global) variable.
The offset for the variable should be updated after finding the type
because the offset in the instruction is just to calcuate the address
for the variable. So it changed to pass a pointer to offset and renamed
it to 'poffset'.
First it searches variables in the CU DIE as it's likely that the global
variables are defined in the file level. And then it iterates the scope
DIEs to find a local (static) variable.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
A typical function prologue and epilogue include multiple stack
operations to save and restore the current value of registers.
On x86, it looks like below:
push r15
push r14
push r13
push r12
...
pop r12
pop r13
pop r14
pop r15
ret
As these all touches the stack memory region, chances are high that they
appear in a memory profile data. But these are not used for any real
purpose yet so it'd return no types.
One of my profile type shows that non neglible portion of data came from
the stack operations. It also seems GCC generates more stack operations
than clang.
Annotate Instruction stats
total 264, ok 169 (64.0%), bad 95 (36.0%)
Name : Good Bad
-----------------------------------------------------------
movq : 49 27
movl : 24 9
popq : 0 19 <-- here
cmpl : 17 2
addq : 14 1
cmpq : 12 2
cmpxchgl : 3 7
Instead of dealing them as unknown, let's create a seperate pseudo type
to represent those stack operations separately.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On x86, instructions for array access often looks like below.
mov 0x1234(%rax,%rbx,8), %rcx
Usually the first register holds the type information and the second one
has the index. And the current code only looks up a variable for the
first register. But it's possible to be in the other way around so it
needs to check the second register if the first one failed.
The stat changed like this.
Annotate data type stats:
total 294, ok 148 (50.3%), bad 146 (49.7%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
66 : no_var
10 : no_typeinfo
8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-4-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When a sample was come from a conditional branch without a memory
operand, it could be due to a macro fusion with a previous instruction.
So it needs to check the memory operand in the previous one.
This improves the stat like below:
Annotate data type stats:
total 294, ok 147 (50.0%), bad 147 (50.0%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
71 : no_var
6 : no_typeinfo
8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
For the performance reason, I prefer llvm-objdump over GNU's. But I
found that llvm-objdump puts x86 lock prefix in a separate line like
below.
ffffffff81000695: f0 lock
ffffffff81000696: ff 83 54 0b 00 00 incl 2900(%rbx)
This should be parsed properly, but I just changed to find the insn
with next offset for now.
This improves the statistics as it can process more instructions.
Annotate data type stats:
total 294, ok 144 (49.0%), bad 150 (51.0%)
-----------------------------------------------------------
30 : no_sym
35 : no_mem_ops
71 : no_var
6 : no_typeinfo
8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If pkg-config is not installed when libtraceevent is linked, the build fails.
The error information is as follows:
$ make
<SNIP>
In file included from /home/yjh/projects_linux/perf-tool-next/linux/tools/perf/util/evsel.c:43:
/home/yjh/projects_linux/perf-tool-next/linux/tools/perf/util/trace-event.h:149:62: error: operator '&&' has no right operand
149 | #if defined(LIBTRACEEVENT_VERSION) && LIBTRACEEVENT_VERSION >= MAKE_LIBTRACEEVENT_VERSION(1, 5, 0)
| ^~
error: command '/usr/bin/gcc' failed with exit code 1
cp: cannot stat 'python_ext_build/lib/perf*.so': No such file or directory
make[2]: *** [Makefile.perf:668: python/perf.cpython-310-x86_64-linux-gnu.so] Error 1
make[2]: *** Waiting for unfinished jobs....
Because pkg-config is not installed, fail to get libtraceevent version in
Makefile.config file. As a result, LIBTRACEEVENT_VERSION is empty.
However, the preceding error information is not user-friendly.
Identify errors in advance by checking that pkg-config is installed at
compile time.
The build results of various scenarios are as follows:
1. build successful when libtraceevent is not linked and pkg-config is not installed
$ pkg-config --version
-bash: /usr/bin/pkg-config: No such file or directory
$ make clean >/dev/null
$ make NO_LIBTRACEEVENT=1 >/dev/null
Makefile.config:1133: No alternatives command found, you need to set JDIR= to point to the root of your Java directory
PERF_VERSION = 6.7.rc6.gd988c9f511af
$ echo $?
0
2. dummy pkg-config is missing when libtraceevent is linked
$ pkg-config --version
-bash: /usr/bin/pkg-config: No such file or directory
$ make clean >/dev/null
$ make >/dev/null
Makefile.config:221: *** Error: pkg-config needed by libtraceevent is missing on this system, please install it. Stop.
make[1]: *** [Makefile.perf:251: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
$ echo $?
2
3. build successful when libtraceevent is linked and pkg-config is installed
$ pkg-config --version
0.29.2
$ make clean >/dev/null
$ make >/dev/null
Makefile.config:1133: No alternatives command found, you need to set JDIR= to point to the root of your Java directory
PERF_VERSION = 6.7.rc6.gd988c9f511af
$ echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240112034019.3558584-1-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This test case often fails on s390 (about 2 out of 10) because the
10% percent limit on the difference between --bpf-counters event counting
and s390 hardware counting is more than 10% in all failure cases.
Raise the limit to 20% on s390 and the test case succeeds.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Link: https://lore.kernel.org/r/20240108084009.3959211-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Consolidate the calls to allow_write_access()/fput() into a single
place, since we repeat this code pattern. Add comments around the
callers for the details on it.
Link: https://lore.kernel.org/r/202209161637.9EDAF6B18@keescook
Signed-off-by: Kees Cook <keescook@chromium.org>
On SoC like i.MX8QXP some SAI IP cores support only Rx path. Allow
specifying only an Rx DMA channel, while omitting the Tx one.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231219122957.3358149-2-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some SoC like i.MX8QXP use a power-domain for this IP, so add it to the
supported properties.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231219122957.3358149-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The UCM configuration for the Lenovo ThinkPad X13s has up until now
been setting the speaker PA volume to the minimum -3 dB when enabling
the speakers, but this does not prevent the user from increasing the
volume further.
Limit the digital gain and PA volumes to a combined -3 dB in the machine
driver to reduce the risk of speaker damage until we have active speaker
protection in place (or higher safe levels have been established).
Note that the PA volume limit cannot be set lower than 0 dB or
PulseAudio gets confused when the first 16 levels all map to -3 dB.
Also note that this will probably need to be generalised using
machine-specific limits, but a common limit should do for now.
Cc: <stable@vger.kernel.org> # 6.5
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122181819.4038-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Scaling min/max freq values were being cached and lagging a setting
each time. Fix the ordering of the clamp call to ensure they work.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931
Fixes: febab20cae ("cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wkarny@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change order of properties in order for the end user to hopefully ignore
pmin-pascal and pmax-pascal which are superseded by pressure-triplet.
Add pressure-triplet property which automatically initializes
pmin-pascal and pmax-pascal inside the driver.
Rework honeywell,pmXX-pascal requirements based on feedback from
Jonathan and Conor.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231229092445.30180-3-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Define enum inside the honeywell,transfer-function property block.
Set the correct irq edge in the example block.
Based on the datasheet, in table 13 on page 11:
"End-of-conversion indicator: This pin is set high when a measurement
and calculation have been completed and the data is ready to be
clocked out"
Add description on End-of-conversion interrupt.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-2-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a SPDX-License-Identifier to the 88PM80x onkey driver and drop the
GPL boilerplate in accordance with current kernel code guidelines.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240121-88pm80x-onkey-spdx-v1-1-b646d4749f5b@skole.hr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is a copy and paste error so it accidentally returns ->convst_gpio
instead of ->reset_gpio. Fix it.
Fixes: 0b76ff46c4 ("iio: adc: Add support for AD7091R-8")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/fd905ad0-6413-489c-9a3b-90c0cdb35ec9@moroto.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Something when wrong when applying the original patch and only the
c file made it in. Here the rest of the changes are applied.
Fixes: c9180b8e39 ("iio: humidity: Add driver for ti HDC302x humidity sensors")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Li peiyu <579lpy@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
There are a ton of build errors when REGMAP is not set, so select
REGMAP to fix all of them.
Examples (not all of them):
../drivers/iio/imu/bno055/bno055_ser_core.c:495:15: error: variable 'bno055_ser_regmap_bus' has initializer but incomplete type
495 | static struct regmap_bus bno055_ser_regmap_bus = {
../drivers/iio/imu/bno055/bno055_ser_core.c:496:10: error: 'struct regmap_bus' has no member named 'write'
496 | .write = bno055_ser_write_reg,
../drivers/iio/imu/bno055/bno055_ser_core.c:497:10: error: 'struct regmap_bus' has no member named 'read'
497 | .read = bno055_ser_read_reg,
../drivers/iio/imu/bno055/bno055_ser_core.c: In function 'bno055_ser_probe':
../drivers/iio/imu/bno055/bno055_ser_core.c:532:18: error: implicit declaration of function 'devm_regmap_init'; did you mean 'vmem_map_init'? [-Werror=implicit-function-declaration]
532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
../drivers/iio/imu/bno055/bno055_ser_core.c:532:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
../drivers/iio/imu/bno055/bno055_ser_core.c: At top level:
../drivers/iio/imu/bno055/bno055_ser_core.c:495:26: error: storage size of 'bno055_ser_regmap_bus' isn't known
495 | static struct regmap_bus bno055_ser_regmap_bus = {
Fixes: 2eef5a9cc6 ("iio: imu: add BNO055 serdev driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrea Merello <andrea.merello@iit.it>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240110185611.19723-1-rdunlap@infradead.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Recently, we encounter kernel crash in function rm3100_common_probe
caused by out of bound access of array rm3100_samp_rates (because of
underlying hardware failures). Add boundary check to prevent out of
bound access.
Fixes: 121354b2ec ("iio: magnetometer: Add driver support for PNI RM3100")
Suggested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: zhili.liu <zhili.liu@ucas.com.cn>
Link: https://lore.kernel.org/r/1704157631-3814-1-git-send-email-zhouzhouyi@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
"bmp085" is missing in bmp280_spi_id[] table, which leads to the next
warning in dmesg:
SPI driver bmp280 has no spi_device_id for bosch,bmp085
Add "bmp085" to bmp280_spi_id[] by mimicking its existing description in
bmp280_of_spi_match[] table to fix the above warning.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Fixes: b26b4e9170 ("iio: pressure: bmp280: add SPI interface driver")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When iio_device_register_sysfs_group() fails, we should
free iio_dev_opaque->chan_attr_group.attrs to prevent
potential memleak.
Fixes: 32f171724e ("iio: core: rework iio device group creation")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231208073119.29283-1-dinghao.liu@zju.edu.cn
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The devicetree binding and datasheets (for both the ADS1015 and
ADS1115) show that the PGA index should have a maximum value of 5,
and not 6.
Signed-off-by: Mohammed Billoo <mab.kernel@gmail.com>
Link: https://lore.kernel.org/r/20240106174836.1086714-1-mab.kernel@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
da280_match_acpi_device() is a DIY version of acpi_device_get_match_data(),
so it can be dropped.
And things can be simplified further by using i2c_get_match_data() which
will also check i2c_client_id style ids.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104160152.304100-1-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AMS AS7331 is a UV light sensor with three channels: UVA, UVB and
UVC (also known as deep UV and referenced as DUV in the iio core).
Its internal structure and forming blocks are practically identical to
the ones the AS73211 contains: API, internal DAC, I2C interface and
registers, measurement modes, number of channels and pinout.
The only difference between them is the photodiodes used to acquire
light, which means that only some modifications are required to add
support for the AS7331 in the existing driver.
The temperature channel is identical for both devices and only the
channel modifiers of the IIO_INTENSITY channels need to account for the
device type.
The scale values have been obtained from the chapter "7.5 Transfer
Function" of the official datasheet[1] for the configuration chosen as
basis (Nclk = 1024 and GAIN = 1). Those values keep the units from the
datasheet (nW/cm^2), as opposed to the units used for the AS73211
(nW/m^2).
Add a new device-specific data structure to account for the device
differences: channel types and scale of LSB per channel.
[1] https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf
Tested-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This device has the same properties and I2C addresses as the as73211.
The only difference between them is the photodiodes they use internally,
which in this case is irrelevant for the bindings.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The scale values associated to the light channels are calculated as a
division that can be better expressed as an IIO_VAL_FRACTIONAL type
instead of the current IIO_VAL_INT.
Note that the constant values used for the calculation were scaled up to
work with integers, turning the nW/cm^2 units from the datasheet into
nW/m^2, which would not be necessary with the IIO_VAL_FRACTIONAL type.
But to avoid issues from current users of the driver, the units must be
kept.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In a "W=1" build gcc throws a warning:
arch/x86/kernel/cpu/resctrl/core.c: In function ‘cache_alloc_hsw_probe’:
arch/x86/kernel/cpu/resctrl/core.c:139:16: warning: variable ‘h’ set but not used
Switch from wrmsr_safe() to wrmsrl_safe(), and from rdmsr() to rdmsrl()
using a single u64 argument for the MSR value instead of the pair of u32
for the high and low halves.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/ZULCd/TGJL9Dmncf@agluck-desk3
CXL 3.1 Section 3.1.1 states:
"A Function on a CXL device must not generate INTx messages if
that Function participates in CXL.cache protocol or CXL.mem
protocols."
The generic CXL memory driver only supports devices which use the
CXL.mem protocol. The current driver attempts to allocate MSI/MSI-X
vectors in anticipation of their need for mailbox interrupts or event
processing. However, the above requirement does not require a device to
support interrupts, only that they use MSI/MSI-X. For example, a device
may disable mailbox interrupts and either be configured for firmware
first or skip event processing and function.
Dave Larsen reported that the following Intel / Agilex card does not
support interrupts on function 0.
CXL: Intel Corporation Device 0ddb (rev 01) (prog-if 10 [CXL Memory Device (CXL 2.x)])
Rather than fail device probe if interrupts are not supported; flag that
irqs are not enabled and avoid features which require interrupts.
Emit messages appropriate for the situation to aid in debugging should
device behavior be unexpected due to a failure to allocate vectors.
Note that it is possible for a device to have host based event
processing through polling. However, the driver does not support
polling and it is not anticipated to be generally required. Leave that
functionality to a future patch if such a device comes along.
Reported-by: Dave Larsen <davelarsen58@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-and-tested-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240117-dont-fail-irq-v2-1-f33f26b0e365@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prevent warnings of the form:
tools/testing/nvdimm/config_check.c:4:6: error: no previous prototype
for ‘check’ [-Werror=missing-prototypes]
...by locally disabling some warnings.
It turns out that:
Commit 0fcb70851f ("Makefile.extrawarn: turn on missing-prototypes globally")
...in addition to expanding in-tree coverage, also impacts out-of-tree
module builds like those in tools/testing/nvdimm/.
Filter out the warning options on unit test code that does not effect
mainline builds.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/170543984331.460832.1780246477583036191.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>