Commit graph

1,264,532 commits

Author SHA1 Message Date
Song Liu
3a889fdce7 Merge branch 'dmraid-fix-6.9' into md-6.9
This is the second half of fixes for dmraid. The first half is available
at [1].

This set contains fixes:
 - reshape can start unexpected, cause data corruption, patch 1,5,6;
 - deadlocks that reshape concurrent with IO, patch 8;
 - a lockdep warning, patch 9;

For all the dmraid related tests in lvm2 suite, there is no new
regressions compared against 6.6 kernels (which is good baseline before
recent regressions).

[1] https://lore.kernel.org/all/CAPhsuW7u1UKHCDOBDhD7DzOVtkGemDz_QnJ4DUq_kSN-Q3G66Q@mail.gmail.com/

* dmraid-fix-6.9:
  dm-raid: fix lockdep waring in "pers->hot_add_disk"
  dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape
  dm-raid: add a new helper prepare_suspend() in md_personality
  md/dm-raid: don't call md_reap_sync_thread() directly
  dm-raid: really frozen sync_thread during suspend
  md: add a new helper reshape_interrupted()
  md: export helper md_is_rdwr()
  md: export helpers to stop sync_thread
  md: don't clear MD_RECOVERY_FROZEN for new dm-raid until resume
2024-03-05 12:53:55 -08:00
Yu Kuai
95009ae904 dm-raid: fix lockdep waring in "pers->hot_add_disk"
The lockdep assert is added by commit a448af25be ("md/raid10: remove
rcu protection to access rdev from conf") in print_conf(). And I didn't
notice that dm-raid is calling "pers->hot_add_disk" without holding
'reconfig_mutex'.

"pers->hot_add_disk" read and write many fields that is protected by
'reconfig_mutex', and raid_resume() already grab the lock in other
contex. Hence fix this problem by protecting "pers->host_add_disk"
with the lock.

Fixes: 9092c02d94 ("DM RAID: Add ability to restore transiently failed devices on resume")
Fixes: a448af25be ("md/raid10: remove rcu protection to access rdev from conf")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-10-yukuai1@huaweicloud.com
2024-03-05 12:53:33 -08:00
Yu Kuai
41425f96d7 dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape
For raid456, if reshape is still in progress, then IO across reshape
position will wait for reshape to make progress. However, for dm-raid,
in following cases reshape will never make progress hence IO will hang:

1) the array is read-only;
2) MD_RECOVERY_WAIT is set;
3) MD_RECOVERY_FROZEN is set;

After commit c467e97f07 ("md/raid6: use valid sector values to determine
if an I/O should wait on the reshape") fix the problem that IO across
reshape position doesn't wait for reshape, the dm-raid test
shell/lvconvert-raid-reshape.sh start to hang:

[root@fedora ~]# cat /proc/979/stack
[<0>] wait_woken+0x7d/0x90
[<0>] raid5_make_request+0x929/0x1d70 [raid456]
[<0>] md_handle_request+0xc2/0x3b0 [md_mod]
[<0>] raid_map+0x2c/0x50 [dm_raid]
[<0>] __map_bio+0x251/0x380 [dm_mod]
[<0>] dm_submit_bio+0x1f0/0x760 [dm_mod]
[<0>] __submit_bio+0xc2/0x1c0
[<0>] submit_bio_noacct_nocheck+0x17f/0x450
[<0>] submit_bio_noacct+0x2bc/0x780
[<0>] submit_bio+0x70/0xc0
[<0>] mpage_readahead+0x169/0x1f0
[<0>] blkdev_readahead+0x18/0x30
[<0>] read_pages+0x7c/0x3b0
[<0>] page_cache_ra_unbounded+0x1ab/0x280
[<0>] force_page_cache_ra+0x9e/0x130
[<0>] page_cache_sync_ra+0x3b/0x110
[<0>] filemap_get_pages+0x143/0xa30
[<0>] filemap_read+0xdc/0x4b0
[<0>] blkdev_read_iter+0x75/0x200
[<0>] vfs_read+0x272/0x460
[<0>] ksys_read+0x7a/0x170
[<0>] __x64_sys_read+0x1c/0x30
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74

This is because reshape can't make progress.

For md/raid, the problem doesn't exist because register new sync_thread
doesn't rely on the IO to be done any more:

1) If array is read-only, it can switch to read-write by ioctl/sysfs;
2) md/raid never set MD_RECOVERY_WAIT;
3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold
   'reconfig_mutex', hence it can be cleared and reshape can continue by
   sysfs api 'sync_action'.

However, I'm not sure yet how to avoid the problem in dm-raid yet. This
patch on the one hand make sure raid_message() can't change
sync_thread() through raid_message() after presuspend(), on the other
hand detect the above 3 cases before wait for IO do be done in
dm_suspend(), and let dm-raid requeue those IO.

Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-9-yukuai1@huaweicloud.com
2024-03-05 12:53:33 -08:00
Yu Kuai
5625ff8b72 dm-raid: add a new helper prepare_suspend() in md_personality
There are no functional changes for now, prepare to fix a deadlock for
dm-raid456.

Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-8-yukuai1@huaweicloud.com
2024-03-05 12:53:33 -08:00
Yu Kuai
cd32b27a66 md/dm-raid: don't call md_reap_sync_thread() directly
Currently md_reap_sync_thread() is called from raid_message() directly
without holding 'reconfig_mutex', this is definitely unsafe because
md_reap_sync_thread() can change many fields that is protected by
'reconfig_mutex'.

However, hold 'reconfig_mutex' here is still problematic because this
will cause deadlock, for example, commit 130443d60b ("md: refactor
idle/frozen_sync_thread() to fix deadlock").

Fix this problem by using stop_sync_thread() to unregister sync_thread,
like md/raid did.

Fixes: be83651f00 ("DM RAID: Add message/status support for changing sync action")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-7-yukuai1@huaweicloud.com
2024-03-05 12:53:32 -08:00
Yu Kuai
16c4770c75 dm-raid: really frozen sync_thread during suspend
1) commit f52f5c71f3 ("md: fix stopping sync thread") remove
   MD_RECOVERY_FROZEN from __md_stop_writes() and doesn't realize that
   dm-raid relies on __md_stop_writes() to frozen sync_thread
   indirectly. Fix this problem by adding MD_RECOVERY_FROZEN in
   md_stop_writes(), and since stop_sync_thread() is only used for
   dm-raid in this case, also move stop_sync_thread() to
   md_stop_writes().
2) The flag MD_RECOVERY_FROZEN doesn't mean that sync thread is frozen,
   it only prevent new sync_thread to start, and it can't stop the
   running sync thread; In order to frozen sync_thread, after seting the
   flag, stop_sync_thread() should be used.
3) The flag MD_RECOVERY_FROZEN doesn't mean that writes are stopped, use
   it as condition for md_stop_writes() in raid_postsuspend() doesn't
   look correct. Consider that reentrant stop_sync_thread() do nothing,
   always call md_stop_writes() in raid_postsuspend().
4) raid_message can set/clear the flag MD_RECOVERY_FROZEN at anytime,
   and if MD_RECOVERY_FROZEN is cleared while the array is suspended,
   new sync_thread can start unexpected. Fix this by disallow
   raid_message() to change sync_thread status during suspend.

Note that after commit f52f5c71f3 ("md: fix stopping sync thread"), the
test shell/lvconvert-raid-reshape.sh start to hang in stop_sync_thread(),
and with previous fixes, the test won't hang there anymore, however, the
test will still fail and complain that ext4 is corrupted. And with this
patch, the test won't hang due to stop_sync_thread() or fail due to ext4
is corrupted anymore. However, there is still a deadlock related to
dm-raid456 that will be fixed in following patches.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/e5e8afe2-e9a8-49a2-5ab0-958d4065c55e@redhat.com/
Fixes: 1af2048a3e ("dm raid: fix deadlock caused by premature md_stop_writes()")
Fixes: 9dbd1aa3a8 ("dm raid: add reshaping support to the target")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-6-yukuai1@huaweicloud.com
2024-03-05 12:53:32 -08:00
Yu Kuai
503f9d4379 md: add a new helper reshape_interrupted()
The helper will be used for dm-raid456 later to detect the case that
reshape can't make progress.

Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-5-yukuai1@huaweicloud.com
2024-03-05 12:53:32 -08:00
Yu Kuai
314e9af065 md: export helper md_is_rdwr()
There are no functional changes for now, prepare to fix a deadlock for
dm-raid456.

Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-4-yukuai1@huaweicloud.com
2024-03-05 12:53:32 -08:00
Yu Kuai
7a2347e284 md: export helpers to stop sync_thread
Add new helpers:

  void md_idle_sync_thread(struct mddev *mddev);
  void md_frozen_sync_thread(struct mddev *mddev);
  void md_unfrozen_sync_thread(struct mddev *mddev);

The helpers will be used in dm-raid in later patches to fix regressions
and prevent calling md_reap_sync_thread() directly.

Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-3-yukuai1@huaweicloud.com
2024-03-05 12:53:32 -08:00
Yu Kuai
2f03d0c2cd md: don't clear MD_RECOVERY_FROZEN for new dm-raid until resume
After commit 9dbd1aa3a8 ("dm raid: add reshaping support to the
target") raid_ctr() will set MD_RECOVERY_FROZEN before md_run() and
expect to keep array frozen until resume. However, md_run() will clear
the flag by setting mddev->recovery to 0.

Before commit 1baae052cc ("md: Don't ignore suspended array in
md_check_recovery()"), dm-raid actually relied on suspending to prevent
starting new sync_thread.

Fix this problem by keeping 'MD_RECOVERY_FROZEN' for dm-raid in
md_run().

Fixes: 1baae052cc ("md: Don't ignore suspended array in md_check_recovery()")
Fixes: 9dbd1aa3a8 ("dm raid: add reshaping support to the target")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-2-yukuai1@huaweicloud.com
2024-03-05 12:53:32 -08:00
Song Liu
3445139e3a Revert "Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d""
This reverts commit bed9e27baf.

The original set [1][2] was expected to undo a suboptimal fix in [2], and
replace it with a better fix [1]. However, as reported by Dan Moulding [2]
causes an issue with raid5 with journal device.

Revert [2] for now to close the issue. We will follow up on another issue
reported by Juxiao Bi, as [2] is expected to fix it. We believe this is a
good trade-off, because the latter issue happens less freqently.

In the meanwhile, we will NOT revert [1], as it contains the right logic.

[1] commit d6e035aad6 ("md: bypass block throttle for superblock update")
[2] commit bed9e27baf ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")

Reported-by: Dan Moulding <dan@danm.net>
Closes: https://lore.kernel.org/linux-raid/20240123005700.9302-1-dan@danm.net/
Fixes: bed9e27baf ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
Cc: stable@vger.kernel.org # v5.19+
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240125082131.788600-1-song@kernel.org
2024-03-05 12:52:59 -08:00
Linus Torvalds
127ec4c0b2 platform-drivers-x86 for v6.8-4
Highlights:
  -  Fix P2SB regression causing ACPI errors and high CPU load
  -  Fix error return path in amd_pmf_init_smart_pc()
 
 The following is an automated git shortlog grouped by driver:
 
 p2sb:
  -  On Goldmont only cache P2SB and SPI devfn BAR
 
 platform/x86/amd/pmf:
  -  Fix missing error code in amd_pmf_init_smart_pc()
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmXm5sIUHGhkZWdvZWRl
 QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9ziBgf8DrSSHfwsLseOV0wqzv2ewn0/YwGD
 0/KUWoEe8Q6RYU2iFPj912r3ky2qtA5I4ZUJXLcD6lTL23FzdOagsJMEr0iwPC5s
 p1nnNCsVChkZvyU6BOvPa8m7W9Od0FY2RnNqtGhC8x9hsnhWOVDW4yG0n7tC+gbN
 3tNqUZDpPotY8jZhpO7kazVHS0gTbYw6ABOvaz73FcDjdfM0TnkVOjDy7+1CGH7t
 wSIo9bQvGvjXqjXk8NQg0GtQt1qZiwpbCycmkJEYXXMnx1HEkdi/UClW74CX2wmr
 YknM05A2hLBLSmHCyODjZnZ3689ODx4nv4H6226Az8B6dW8j81dmIQEPzQ==
 =8CgQ
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - Fix P2SB regression causing ACPI errors and high CPU load

 - Fix error return path in amd_pmf_init_smart_pc()

* tag 'platform-drivers-x86-v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/pmf: Fix missing error code in amd_pmf_init_smart_pc()
  platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR
2024-03-05 12:48:29 -08:00
Tudor Ambarus
7ad288208d spi: s3c64xx: switch exynos850 to new port config data
Exynos850 has the same version of USI SPI (v2.1) as GS101.
Drop the fifo_lvl_mask and rx_lvl_offset and switch to the new port
config data.

Backward compatibility with DT is not broken because when alises are
set:
- the SPI core will set the bus number according to the alias ID
- the FIFO depth is always the same size for exynos850 (64 bytes) no
  matter the alias ID number.

Advantages of the change:
- drop dependency on the OF alias ID.
- FIFO depth is inferred from the compatible. Exynos850 integrates 3 SPI
  IPs, all with 64 bytes FIFO depths.
- use full mask for SPI_STATUS.{RX, TX}_FIFO_LVL fields. Using partial
  masks is misleading and can hide problems of the driver logic.

Just compiled tested.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-13-tudor.ambarus@linaro.org
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:43:00 +00:00
Tudor Ambarus
e8b16c7a42 spi: s3c64xx: switch gs101 to new port config data
Drop the fifo_lvl_mask and rx_lvl_offset and switch to the new port
config data.

Advantages of the change:
- drop dependency on the OF alias ID.
- FIFO depth is inferred from the compatible. GS101 integrates 16 SPI
  IPs, all with 64 bytes FIFO depths.
- use full mask for SPI_STATUS.{RX, TX}_FIFO_LVL fields. Using partial
  masks is misleading and can hide problems of the driver logic.

S3C64XX_SPI_ST_TX_FIFO_RDY_V2 was defined based on the USI's
SPI_VERSION.USI_IP_VERSION register field, which has value 2 at reset.

MAX_SPI_PORTS is updated to reflect the maximum number of ports for the
rest of the compatibles.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-12-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:59 +00:00
Tudor Ambarus
ad0adac84d spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
Deprecate fifo_lvl_mask, rx_lvl_offset and port_id. One shall use
{rx, tx}_fifomask instead. Add messages to each port configuration.

Suggested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-11-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:58 +00:00
Tudor Ambarus
ea3fba7c41 spi: s3c64xx: get rid of the OF alias ID dependency
Compatibles that set ``port_conf->{rx, tx}_fifomask`` are now safe to
get rid of the OF alias ID dependency. Let the driver probe even without
the alias for these.

With this we also protect the FIFO_LVL_MASK calls from
s3c64xx_spi_set_fifomask().

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-10-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:57 +00:00
Tudor Ambarus
2cda3623ff spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
Prepare driver to get rid of the of alias ID dependency. Split the
port_id logic into a dedicated method.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-9-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:56 +00:00
Tudor Ambarus
e08433e095 spi: s3c64xx: let the SPI core determine the bus number
Let the core determine the bus number, either by getting the alias ID
(as the driver forces now), or by allocating a dynamic bus number when
the alias is absent. Prepare the driver to allow dt aliases to be
absent.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-8-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:55 +00:00
Tudor Ambarus
82b98fb8cd spi: s3c64xx: allow FIFO depth to be determined from the compatible
There are SoCs that use the same FIFO depth for all the instances of the
SPI IP. See the fifo_lvl_mask defined for gs101 for example:
    .fifo_lvl_mask  = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f,
                        0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f},

Instead of specifying the FIFO depth with the same value for all 16
nodes in this case, allow such SoCs to infer the FIFO depth from the
compatible. There are other SoCs than can benefit of this, see:
{gs101, fsd, exynos850, s3c641, s3c2443}_spi_port_config.

The FIFO depth inferred from the compatible has a higher precedence than
the one that might be specified via device tree, the driver shall know
better.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-7-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:54 +00:00
Tudor Ambarus
414d7b8c91 spi: s3c64xx: retrieve the FIFO depth from the device tree
There are SoCs that configure different FIFO depths for their instances
of the SPI IP. See the fifo_lvl_mask defined for exynos4_spi_port_config
for example:
        .fifo_lvl_mask  = { 0x1ff, 0x7F, 0x7F },
The first instance of the IP is configured with 256 bytes FIFOs, whereas
the last two are configured with 64 bytes FIFOs.

Instead of mangling with the .fifo_lvl_mask and its dependency of the DT
alias ID, allow such SoCs to determine the FIFO depth via the
``fifo-depth`` DT property.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-6-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:53 +00:00
Tudor Ambarus
c6e776ab6a spi: s3c64xx: determine the fifo depth only once
Determine the FIFO depth only once, at probe time.
``sdd->fifo_depth`` can be set later on with the FIFO depth
specified in the device tree.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-5-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:52 +00:00
Tudor Ambarus
d6911cf27e spi: s3c64xx: allow full FIFO masks
The driver is wrong because is using partial register field masks for the
SPI_STATUS.{RX, TX}_FIFO_LVL register fields.

We see s3c64xx_spi_port_config.fifo_lvl_mask with different values for
different instances of the same IP. Take s5pv210_spi_port_config for
example, it defines:
	.fifo_lvl_mask  = { 0x1ff, 0x7F },

fifo_lvl_mask is used to determine the FIFO depth of the instance of the
IP. In this case, the integrator uses a 256 bytes FIFO for the first SPI
instance of the IP, and a 64 bytes FIFO for the second instance. While
the first mask reflects the SPI_STATUS.{RX, TX}_FIFO_LVL register
fields, the second one is two bits short. Using partial field masks is
misleading and can hide problems of the driver's logic.

Allow platforms to specify the full FIFO mask, regardless of the FIFO
depth.

Introduce {rx, tx}_fifomask to represent the SPI_STATUS.{RX, TX}_FIFO_LVL
register fields. It's a shifted mask defining the field's length and
position. We'll be able to deprecate the use of @rx_lvl_offset, as the
shift value can be determined from the mask. The existing compatibles
shall start using {rx, tx}_fifomask so that they use the full field mask
and to avoid shifting the mask to position, and then shifting it back to
zero in the {TX, RX}_FIFO_LVL macros.

@rx_lvl_offset will be deprecated in a further patch, after we have the
infrastructure to deprecate @fifo_lvl_mask as well.

No functional change intended.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-4-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:51 +00:00
Tudor Ambarus
ff8faa8a5c spi: s3c64xx: define a magic value
Define a magic value, it will be used in the next patch as well.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-3-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:50 +00:00
Tudor Ambarus
80a38bfbbd spi: dt-bindings: introduce FIFO depth properties
There are SPI IPs that can be configured by the integrator with a
specific FIFO depth depending on the system's capabilities. For example,
the samsung USI SPI IP can be configured by the integrator with a TX/RX
FIFO from 8 byte to 256 bytes.

Introduce the ``fifo-depth`` property for such instances of IPs where the
same FIFO depth is used for both RX and TX. Introduce ``rx-fifo-depth``
and ``tx-fifo-depth`` properties for cases where the RX FIFO depth is
different from the TX FIFO depth.

Make the dedicated RX/TX properties dependent on each other and mutual
exclusive with the other.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://msgid.link/r/20240216070555.2483977-2-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:49 +00:00
Javier García
2ca703302a
ASoC: dt-bindings: rt1015: Convert to dtschema
Convert the RT1015 Mono Class D Audio Amplifier to DT schema.

Signed-off-by: Javier García <javier.gar.tab@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20240304142315.14522-1-javier.gar.tab@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:16 +00:00
Andy Shevchenko
8fedf4f1d6
ASoC: Intel: atom: sst_ipc: Remove unused intel-mid.h
intel-mid.h is providing some core parts of the South Complex PM,
which are usually are not used by individual drivers. In particular,
this driver doesn't use it, so simply remove the unused header.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240305160723.1363534-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 20:42:15 +00:00
Linus Torvalds
1c46d04a0d hyperv-fixes for v6.8
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmXlZ0gTHHdlaS5saXVA
 a2VybmVsLm9yZwAKCRB2FHBfkEGgXnnUB/oCfw6GxsYL4eAiKcayrU0E7aDZbZzG
 wf/1m3fSiocERGEQqyU7s3ULoba/ejX09nTwV+ZwECbqat64ceUQb5ousf/3kn7i
 vg3kbPKmF79c2DNMnT5+K7gvmhyewm+5r8eCBsOegEqnXv0F3tGjq729Qe+5/SBB
 roP5XHjERpY5yHVsDNsTeQ1Qg+H/Mg/2eLAogSFtY0FXKfNrXXmMAuKwe7UJdWmd
 KIeSA4F18wsohtb4Aq8XLDG8UwmCUaBjzGsBOgjlVLtP2QxyfxswWludVK/fwyVl
 T/xcMW2ZZcK7mWRebqr9iritxbOls8ltbsY3fLENREJShs+JgLs19w8x
 =vyy7
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-fixes-signed-20240303' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - Multiple fixes, cleanups and documentations for Hyper-V core code and
   drivers

* tag 'hyperv-fixes-signed-20240303' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: vmbus: make hv_bus const
  x86/hyperv: Allow 15-bit APIC IDs for VTL platforms
  x86/hyperv: Make encrypted/decrypted changes safe for load_unaligned_zeropad()
  x86/mm: Regularize set_memory_p() parameters and make non-static
  x86/hyperv: Use slow_virt_to_phys() in page transition hypervisor callback
  Documentation: hyperv: Add overview of PCI pass-thru device support
  Drivers: hv: vmbus: Update indentation in create_gpadl_header()
  Drivers: hv: vmbus: Remove duplication and cleanup code in create_gpadl_header()
  fbdev/hyperv_fb: Fix logic error for Gen2 VMs in hvfb_getmem()
  Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memory
  hv_utils: Allow implicit ICTIMESYNCFLAG_SYNC
2024-03-05 12:38:50 -08:00
Rafael J. Wysocki
53b94f421d thermal: intel: int340x_thermal: Use thermal zone accessor functions
Make int340x_thermal use the dedicated accessor functions for the
thermal zone device object address and the thermal zone type string.

This is requisite for future thermal core improvements.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2024-03-05 21:38:22 +01:00
Rafael J. Wysocki
166d017d34 Merge thermal core changes for 6.9 to satisfy a dependency. 2024-03-05 21:37:49 +01:00
Sergey Kalinichev
00efe7fcf9 ACPI: resource: Use IRQ override on Maibenben X565
Use ACPI IRQ override on Maibenben X565 laptop to make the internal
keyboard work.

Add a new entry to the irq1_edge_low_force_override structure, similar
to the existing ones.

Signed-off-by: Sergey Kalinichev <kalinichev.so.0@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-03-05 21:33:38 +01:00
Jarred White
2f4a4d63a1 ACPI: CPPC: Use access_width over bit_width for system memory accesses
To align with ACPI 6.3+, since bit_width can be any 8-bit value, it
cannot be depended on to be always on a clean 8b boundary. This was
uncovered on the Cobalt 100 platform.

SError Interrupt on CPU26, code 0xbe000011 -- SError
 CPU: 26 PID: 1510 Comm: systemd-udevd Not tainted 5.15.2.1-13 #1
 Hardware name: MICROSOFT CORPORATION, BIOS MICROSOFT CORPORATION
 pstate: 62400009 (nZCv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
 pc : cppc_get_perf_caps+0xec/0x410
 lr : cppc_get_perf_caps+0xe8/0x410
 sp : ffff8000155ab730
 x29: ffff8000155ab730 x28: ffff0080139d0038 x27: ffff0080139d0078
 x26: 0000000000000000 x25: ffff0080139d0058 x24: 00000000ffffffff
 x23: ffff0080139d0298 x22: ffff0080139d0278 x21: 0000000000000000
 x20: ffff00802b251910 x19: ffff0080139d0000 x18: ffffffffffffffff
 x17: 0000000000000000 x16: ffffdc7e111bad04 x15: ffff00802b251008
 x14: ffffffffffffffff x13: ffff013f1fd63300 x12: 0000000000000006
 x11: ffffdc7e128f4420 x10: 0000000000000000 x9 : ffffdc7e111badec
 x8 : ffff00802b251980 x7 : 0000000000000000 x6 : ffff0080139d0028
 x5 : 0000000000000000 x4 : ffff0080139d0018 x3 : 00000000ffffffff
 x2 : 0000000000000008 x1 : ffff8000155ab7a0 x0 : 0000000000000000
 Kernel panic - not syncing: Asynchronous SError Interrupt
 CPU: 26 PID: 1510 Comm: systemd-udevd Not tainted
5.15.2.1-13 #1
 Hardware name: MICROSOFT CORPORATION, BIOS MICROSOFT CORPORATION
 Call trace:
  dump_backtrace+0x0/0x1e0
  show_stack+0x24/0x30
  dump_stack_lvl+0x8c/0xb8
  dump_stack+0x18/0x34
  panic+0x16c/0x384
  add_taint+0x0/0xc0
  arm64_serror_panic+0x7c/0x90
  arm64_is_fatal_ras_serror+0x34/0xa4
  do_serror+0x50/0x6c
  el1h_64_error_handler+0x40/0x74
  el1h_64_error+0x7c/0x80
  cppc_get_perf_caps+0xec/0x410
  cppc_cpufreq_cpu_init+0x74/0x400 [cppc_cpufreq]
  cpufreq_online+0x2dc/0xa30
  cpufreq_add_dev+0xc0/0xd4
  subsys_interface_register+0x134/0x14c
  cpufreq_register_driver+0x1b0/0x354
  cppc_cpufreq_init+0x1a8/0x1000 [cppc_cpufreq]
  do_one_initcall+0x50/0x250
  do_init_module+0x60/0x27c
  load_module+0x2300/0x2570
  __do_sys_finit_module+0xa8/0x114
  __arm64_sys_finit_module+0x2c/0x3c
  invoke_syscall+0x78/0x100
  el0_svc_common.constprop.0+0x180/0x1a0
  do_el0_svc+0x84/0xa0
  el0_svc+0x2c/0xc0
  el0t_64_sync_handler+0xa4/0x12c
  el0t_64_sync+0x1a4/0x1a8

Instead, use access_width to determine the size and use the offset and
width to shift and mask the bits to read/write out. Make sure to add a
check for system memory since pcc redefines the access_width to
subspace id.

If access_width is not set, then fall back to using bit_width.

Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
[ rjw: Subject and changelog edits, comment adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-03-05 21:27:42 +01:00
He Rongguang
6b8e288f49 cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
According to x86 spec ([1] and [2]), MWAIT hint_address[7:4] plus 1 is
the corresponding C-state, and 0xF means C0.

ACPI C-state table usually only contains C1+, but nothing prevents ACPI
firmware from presenting a C-state (maybe C1+) but using MWAIT address C0
(i.e., 0xF in ACPI FFH MWAIT hint address). And if this is the case, Linux
erroneously treat this cstate as C16, while actually this should be valid
C0 instead of C16, as per the specifications.

Since ACPI firmware is out of Linux kernel scope, fix the kernel handling
of 0xF ->(to) C0 in this situation. This is found when a tweaked ACPI
C-state table is presented by Qemu to VM.

Also modify the intel_idle case for code consistency.

[1]. Intel SDM Vol 2, Table 4-11. MWAIT Hints
Register (EAX): "Value of 0 means C1; 1 means C2 and so on
Value of 01111B means C0".

[2]. AMD manual Vol 3, MWAIT: "The processor C-state is EAX[7:4]+1, so to
request C0 is to place the value F in EAX[7:4] and to request C1 is to
place the value 0 in EAX[7:4].".

Signed-off-by: He Rongguang <herongguang@linux.alibaba.com>
[ rjw: Subject and changelog edits, whitespace fixups ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-03-05 21:25:18 +01:00
Uwe Kleine-König
60d06425e0 ptp: fc3: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240304091325.717546-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 11:23:02 -08:00
Krzysztof Kozlowski
7921e231f8 riscv: dts: starfive: jh7100: fix root clock names
JH7100 clock controller driver depends on certain root clock names.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWw0dteXO2jw4cwGvzKcL6vmnb96C=qgPgUqNDMtF6X0Q@mail.gmail.com/
Fixes: f036064708 ("riscv: dts: starfive: replace underscores in node names")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-03-05 19:22:16 +00:00
Jakub Kicinski
73a42f4174 Merge branch 'net-constify-struct-class-usage'
Ricardo B. Marliere says:

====================
net: constify struct class usage

This is a simple and straight forward cleanup series that aims to make the
class structures in net constant. This has been possible since 2023 [1].

[1]: https://lore.kernel.org/all/2023040248-customary-release-4aec@gregkh/
====================

Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-0-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 11:21:22 -08:00
Ricardo B. Marliere
e556001169 nfc: core: make nfc_class constant
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the nfc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-6-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 11:21:18 -08:00
Ricardo B. Marliere
070bef83f0 net: wwan: core: make wwan_class constant
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the wwan_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-5-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 11:21:18 -08:00
Ricardo B. Marliere
d9567f212b net: wwan: hwsim: make wwan_hwsim_class constant
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the wwan_hwsim_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-4-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 11:21:18 -08:00
Ricardo B. Marliere
2ad2018aa3 net: ppp: make ppp_class constant
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the ppp_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-3-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 11:21:18 -08:00
Ricardo B. Marliere
63767a7631 net: wan: framer: make framer_class constant
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the framer_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-2-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 11:21:17 -08:00
Ricardo B. Marliere
b6e3c115ef net: hns: make hnae_class constant
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the hnae_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-1-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 11:21:17 -08:00
Ricardo B. Marliere
4fe6207508
regulator: core: make regulator_class constant
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the regulator_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://msgid.link/r/20240305-class_cleanup-regulator-v1-1-4950345d6d8f@marliere.net
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-05 19:20:21 +00:00
Jakub Kicinski
e8efd372b2 Merge branch 'net-phy-micrel-lan8814-erratas'
Horatiu Vultur says:

====================
net: phy: micrel: lan8814 erratas

Add two erratas for lan8814. First one fix the led which might
stay on even that there is no link. The second one improves increases
length of the cable that can be used when used in 1000Base-T.
====================

Link: https://lore.kernel.org/r/20240304091548.1386022-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 11:17:56 -08:00
Horatiu Vultur
ad080db448 net: phy: micrel: lan8814 cable improvement errata
When the length of the cable is more than 100m and the lan8814 is
configured to run in 1000Base-T Slave then the register of the device
needs to be optimized.

Workaround this by setting the measure time to a value of 0xb. This
value can be set regardless of the configuration.

This issue is described in 'LAN8814 Silicon Errata and Data Sheet
Clarification' and according to that, this will not be corrected in a
future silicon revision.

Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20240304091548.1386022-3-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 11:17:46 -08:00
Horatiu Vultur
e9097f8e1e net: phy: micrel: lan8814 led errata
Lan8814 phy led behavior is not correct. It was noticed that the led
still remains ON when the cable is unplugged while there was traffic
passing at that time.

The fix consists in clearing bit 10 of register 0x38, in this way the
led behaviour is correct and gets OFF when there is no link.

Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240304091548.1386022-2-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 11:17:46 -08:00
Eric Dumazet
685f7d5312 net/ipv6: avoid possible UAF in ip6_route_mpath_notify()
syzbot found another use-after-free in ip6_route_mpath_notify() [1]

Commit f7225172f2 ("net/ipv6: prevent use after free in
ip6_route_mpath_notify") was not able to fix the root cause.

We need to defer the fib6_info_release() calls after
ip6_route_mpath_notify(), in the cleanup phase.

[1]
BUG: KASAN: slab-use-after-free in rt6_fill_node+0x1460/0x1ac0
Read of size 4 at addr ffff88809a07fc64 by task syz-executor.2/23037

CPU: 0 PID: 23037 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-01035-gea7f3cfaa588 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x167/0x540 mm/kasan/report.c:488
  kasan_report+0x142/0x180 mm/kasan/report.c:601
 rt6_fill_node+0x1460/0x1ac0
  inet6_rt_notify+0x13b/0x290 net/ipv6/route.c:6184
  ip6_route_mpath_notify net/ipv6/route.c:5198 [inline]
  ip6_route_multipath_add net/ipv6/route.c:5404 [inline]
  inet6_rtm_newroute+0x1d0f/0x2300 net/ipv6/route.c:5517
  rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
  netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
  netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x221/0x270 net/socket.c:745
  ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
  ___sys_sendmsg net/socket.c:2638 [inline]
  __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
 do_syscall_64+0xf9/0x240
 entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f73dd87dda9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f73de6550c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f73dd9ac050 RCX: 00007f73dd87dda9
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005
RBP: 00007f73dd8ca47a R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007f73dd9ac050 R15: 00007ffdbdeb7858
 </TASK>

Allocated by task 23037:
  kasan_save_stack mm/kasan/common.c:47 [inline]
  kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
  poison_kmalloc_redzone mm/kasan/common.c:372 [inline]
  __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:389
  kasan_kmalloc include/linux/kasan.h:211 [inline]
  __do_kmalloc_node mm/slub.c:3981 [inline]
  __kmalloc+0x22e/0x490 mm/slub.c:3994
  kmalloc include/linux/slab.h:594 [inline]
  kzalloc include/linux/slab.h:711 [inline]
  fib6_info_alloc+0x2e/0xf0 net/ipv6/ip6_fib.c:155
  ip6_route_info_create+0x445/0x12b0 net/ipv6/route.c:3758
  ip6_route_multipath_add net/ipv6/route.c:5298 [inline]
  inet6_rtm_newroute+0x744/0x2300 net/ipv6/route.c:5517
  rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
  netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
  netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x221/0x270 net/socket.c:745
  ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
  ___sys_sendmsg net/socket.c:2638 [inline]
  __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
 do_syscall_64+0xf9/0x240
 entry_SYSCALL_64_after_hwframe+0x6f/0x77

Freed by task 16:
  kasan_save_stack mm/kasan/common.c:47 [inline]
  kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
  kasan_save_free_info+0x4e/0x60 mm/kasan/generic.c:640
  poison_slab_object+0xa6/0xe0 mm/kasan/common.c:241
  __kasan_slab_free+0x34/0x70 mm/kasan/common.c:257
  kasan_slab_free include/linux/kasan.h:184 [inline]
  slab_free_hook mm/slub.c:2121 [inline]
  slab_free mm/slub.c:4299 [inline]
  kfree+0x14a/0x380 mm/slub.c:4409
  rcu_do_batch kernel/rcu/tree.c:2190 [inline]
  rcu_core+0xd76/0x1810 kernel/rcu/tree.c:2465
  __do_softirq+0x2bb/0x942 kernel/softirq.c:553

Last potentially related work creation:
  kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47
  __kasan_record_aux_stack+0xae/0x100 mm/kasan/generic.c:586
  __call_rcu_common kernel/rcu/tree.c:2715 [inline]
  call_rcu+0x167/0xa80 kernel/rcu/tree.c:2829
  fib6_info_release include/net/ip6_fib.h:341 [inline]
  ip6_route_multipath_add net/ipv6/route.c:5344 [inline]
  inet6_rtm_newroute+0x114d/0x2300 net/ipv6/route.c:5517
  rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
  netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
  netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x221/0x270 net/socket.c:745
  ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
  ___sys_sendmsg net/socket.c:2638 [inline]
  __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
 do_syscall_64+0xf9/0x240
 entry_SYSCALL_64_after_hwframe+0x6f/0x77

The buggy address belongs to the object at ffff88809a07fc00
 which belongs to the cache kmalloc-512 of size 512
The buggy address is located 100 bytes inside of
 freed 512-byte region [ffff88809a07fc00, ffff88809a07fe00)

The buggy address belongs to the physical page:
page:ffffea0002681f00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9a07c
head:ffffea0002681f00 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfff00000000840(slab|head|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000840 ffff888014c41c80 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 23028, tgid 23027 (syz-executor.4), ts 2340253595219, free_ts 2339107097036
  set_page_owner include/linux/page_owner.h:31 [inline]
  post_alloc_hook+0x1ea/0x210 mm/page_alloc.c:1533
  prep_new_page mm/page_alloc.c:1540 [inline]
  get_page_from_freelist+0x33ea/0x3580 mm/page_alloc.c:3311
  __alloc_pages+0x255/0x680 mm/page_alloc.c:4567
  __alloc_pages_node include/linux/gfp.h:238 [inline]
  alloc_pages_node include/linux/gfp.h:261 [inline]
  alloc_slab_page+0x5f/0x160 mm/slub.c:2190
  allocate_slab mm/slub.c:2354 [inline]
  new_slab+0x84/0x2f0 mm/slub.c:2407
  ___slab_alloc+0xd17/0x13e0 mm/slub.c:3540
  __slab_alloc mm/slub.c:3625 [inline]
  __slab_alloc_node mm/slub.c:3678 [inline]
  slab_alloc_node mm/slub.c:3850 [inline]
  __do_kmalloc_node mm/slub.c:3980 [inline]
  __kmalloc+0x2e0/0x490 mm/slub.c:3994
  kmalloc include/linux/slab.h:594 [inline]
  kzalloc include/linux/slab.h:711 [inline]
  new_dir fs/proc/proc_sysctl.c:956 [inline]
  get_subdir fs/proc/proc_sysctl.c:1000 [inline]
  sysctl_mkdir_p fs/proc/proc_sysctl.c:1295 [inline]
  __register_sysctl_table+0xb30/0x1440 fs/proc/proc_sysctl.c:1376
  neigh_sysctl_register+0x416/0x500 net/core/neighbour.c:3859
  devinet_sysctl_register+0xaf/0x1f0 net/ipv4/devinet.c:2644
  inetdev_init+0x296/0x4d0 net/ipv4/devinet.c:286
  inetdev_event+0x338/0x15c0 net/ipv4/devinet.c:1555
  notifier_call_chain+0x18f/0x3b0 kernel/notifier.c:93
  call_netdevice_notifiers_extack net/core/dev.c:1987 [inline]
  call_netdevice_notifiers net/core/dev.c:2001 [inline]
  register_netdevice+0x15b2/0x1a20 net/core/dev.c:10340
  br_dev_newlink+0x27/0x100 net/bridge/br_netlink.c:1563
  rtnl_newlink_create net/core/rtnetlink.c:3497 [inline]
  __rtnl_newlink net/core/rtnetlink.c:3717 [inline]
  rtnl_newlink+0x158f/0x20a0 net/core/rtnetlink.c:3730
page last free pid 11583 tgid 11583 stack trace:
  reset_page_owner include/linux/page_owner.h:24 [inline]
  free_pages_prepare mm/page_alloc.c:1140 [inline]
  free_unref_page_prepare+0x968/0xa90 mm/page_alloc.c:2346
  free_unref_page+0x37/0x3f0 mm/page_alloc.c:2486
  kasan_depopulate_vmalloc_pte+0x74/0x90 mm/kasan/shadow.c:415
  apply_to_pte_range mm/memory.c:2619 [inline]
  apply_to_pmd_range mm/memory.c:2663 [inline]
  apply_to_pud_range mm/memory.c:2699 [inline]
  apply_to_p4d_range mm/memory.c:2735 [inline]
  __apply_to_page_range+0x8ec/0xe40 mm/memory.c:2769
  kasan_release_vmalloc+0x9a/0xb0 mm/kasan/shadow.c:532
  __purge_vmap_area_lazy+0x163f/0x1a10 mm/vmalloc.c:1770
  drain_vmap_area_work+0x40/0xd0 mm/vmalloc.c:1804
  process_one_work kernel/workqueue.c:2633 [inline]
  process_scheduled_works+0x913/0x1420 kernel/workqueue.c:2706
  worker_thread+0xa5f/0x1000 kernel/workqueue.c:2787
  kthread+0x2ef/0x390 kernel/kthread.c:388
  ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242

Memory state around the buggy address:
 ffff88809a07fb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88809a07fb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88809a07fc00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff88809a07fc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88809a07fd00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 3b1137fe74 ("net: ipv6: Change notifications for multipath add to RTA_MULTIPATH")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240303144801.702646-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 11:16:11 -08:00
Kent Gibson
297dc37a1e selftest: gpio: remove obsolete gpio-mockup test
With the removal of the ARCH_NR_GPIOS, the number of available GPIOs
is effectively unlimited, causing the gpio-mockup module load failure
test that overflowed the number of GPIOs to unexpectedly succeed, and
so fail.

The test is no longer relevant so remove it.
Promote the "no lines defined" test so there is still one load
failure test in the basic set.

Fixes: 7b61212f2a ("gpiolib: Get rid of ARCH_NR_GPIOS")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Reported-by: Yi Lai <yi1.lai@intel.com>
Closes: https://lore.kernel.org/linux-gpio/ZC6OHBjdwBdT4sSb@xpf.sh.intel.com/
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-03-05 20:01:08 +01:00
Kalle Valo
f654e228ed ath.git patches for v6.9
Only some minor cleanup in ath11k and ath12k. Adding Jeff as the
 maintainer for ath10k, ath11k and ath12k DT bindings.
 -----BEGIN PGP SIGNATURE-----
 
 iQFLBAABCgA1FiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXnWpcXHHF1aWNfa3Zh
 bG9AcXVpY2luYy5jb20ACgkQbhckVSbrbZvJIQf+M5wX6AR9MlPNO+pyOe+PDI6z
 WW+TKkkHfMyMBq7XwsdQK1rwJQTZazf0ltHJ0iUJPz4a4On48i7Nt0Q2YXGXFvYF
 B5OOXxeItJ4KIb0PaYl6WvlZhsUwV7splq9kCbrO5jpQichJoCeizoDUvPIcGFzu
 ShhHoi+J2t9SCd07dGAU1iYVk4+oRfhgtK3bwXOtLaBJFGlLWEKI7cwFIdIe8h6U
 gWBJeWMYLqyHQrGXbYjfWsh5BtRIodMBGlDDQ/fhYvs56Knvb3EEIYac+X9V//mq
 bqJu294tnUL2wmG6xnWCeEz19zlCUnxhrnv44qfi+IPIelNsT06/6o1rKDB2Kw==
 =hsOg
 -----END PGP SIGNATURE-----

Merge tag 'ath-next-20240305' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath

ath.git patches for v6.9

Only some minor cleanup in ath11k and ath12k. Adding Jeff as the
maintainer for ath10k, ath11k and ath12k DT bindings.
2024-03-05 20:57:28 +02:00
Chin-Yen Lee
4dc38e3975 wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode
Now WoWLAN firmware will disable PCIE DMA after driver call cfg_wake
function, and it will lead to release offload packet fail because driver
can't receive completion notification from firmware. We move release
offload packet earlier to avoid this error.

Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240302005828.13666-8-pkshih@realtek.com
2024-03-05 20:56:43 +02:00
Chin-Yen Lee
d12d3df874 wifi: rtw89: wow: set security engine options for 802.11ax chips only
The security engine is set for management frames by default for 802.11be
chips, so no need to set it in WoWLAN flow.

Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240302005828.13666-7-pkshih@realtek.com
2024-03-05 20:56:43 +02:00