Adjust user accessors for both 32BIT and 64BIT, including: get_user(),
put_user(), copy_user(), clear_user(), etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust system call for both 32BIT and 64BIT, including: add the uapi
unistd_{32,64}.h and syscall_table_{32,64}.h inclusion, add sys_mmap2()
definition, change the system call entry routines, etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust module loader for both 32BIT and 64BIT, including: change the s64
type to long, change the u64 type to unsigned long, change the plt entry
definition and handling, etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust time routines for both 32BIT and 64BIT, including: rdtime_h() /
rdtime_l() definitions for 32BIT and rdtime_d() definition for 64BIT,
get_cycles() and get_cycles64() definitions for 32BIT/64BIT, show time
frequency info ("CPU MHz" and "BogoMIPS") in /proc/cpuinfo, etc.
Use do_div() for division which works on both 32BIT and 64BIT platforms.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust process management for both 32BIT and 64BIT, including: CPU
context switching, FPU loading/restoring, process dumping and process
tracing routines.
Q: Why modify switch.S?
A: LoongArch32 has no ldptr.d/stptr.d instructions, and asm offsets of
thead_struct members are too large to be filled in the 12b immediate
field of ld.w/st.w.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust boot & setup for both 32BIT and 64BIT, including: efi header
definition, MAX_IO_PICS definition, kernel entry and environment setup
routines, etc.
Add a fallback path in fdt_cpu_clk_init() to avoid 0MHz in /proc/cpuinfo
if there is no valid clock freq from firmware.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Most common macros are defined in asm.h, asmmacro.h and stackframe.h.
Adjust these macros for both 32BIT and 64BIT.
Add SETUP_TWINS (Setup Trampoline Windows) and SETUP_MODES (Setup CRMD/
PRMD/EUEN) which will be used later.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
32BIT platforms only have 32bit CSR/IOCSR registers, 64BIT platforms
have both 32bit/64bit CSR/IOCSR registers. Now there are both 32bit and
64bit CSR accessors:
csr_read32()/csr_write32()/csr_xchg32();
csr_read64()/csr_write64()/csr_xchg64();
Some CSR registers (address and timer registers) are 32bit length on
32BIT platform and 64bit length on 64BIT platform. To avoid #ifdefs here
and there, they need adaptive accessors, so we define and use:
csr_read()/csr_write()/csr_xchg();
IOCSR doesn't have a "natural length", which means a 64bit register can
be treated as two 32bit registers, so we just use two 32bit accessors to
emulate a 64bit accessors.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch64 has both AMO and LL/SC instructions, while LoongArch32 only
has LL/SC intstructions. So we add a Kconfig option CPU_HAS_AMO here and
implement atomic operations (also including local operations and percpu
operations) for both 32BIT and 64BIT platforms.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Loongson-2K3000 has a new PCI ID (0x7a46) for its display controller,
Add it for pci_fixup_vgadev() since we prefer a discrete graphics card
as default boot device if present.
Cc: stable@vger.kernel.org
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add and use some macros for AVEC interrupt controller, instead of using
magic numbers.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
For thread_count, the current calculation method has a maximum of 255,
which may not be sufficient in the future. Therefore, we are correcting
it now.
Reference: SMBIOS Specification, 7.5 Processor Information (Type 4)[1]
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.9.0.pdf
Cc: stable@vger.kernel.org
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
It is better to use unsigned long rather than long for _end and _text to
calculate the kernel length.
Cc: stable@vger.kernel.org # v6.3+
Fixes: e5f02b51fa ("LoongArch: Add support for kernel address space layout randomization (KASLR)")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The __pmd() and __pte() helper macros provide the correct initialization
syntax and abstraction for the pmd_t and pte_t types.
Use __pmd() to fix follow warning about __swp_entry_to_pmd() with gcc-15
under specific configs [1] :
In file included from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:31,
from ./include/linux/pagemap.h:8,
from arch/loongarch/mm/init.c:14:
./include/linux/swapops.h: In function ‘swp_entry_to_pmd’:
./arch/loongarch/include/asm/pgtable.h:302:34: error: missing braces around initializer [-Werror=missing-braces]
302 | #define __swp_entry_to_pmd(x) ((pmd_t) { (x).val | _PAGE_HUGE })
| ^
./include/linux/swapops.h:559:16: note: in expansion of macro ‘__swp_entry_to_pmd’
559 | return __swp_entry_to_pmd(arch_entry);
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Also update __swp_entry_to_pte() to use __pte() for consistency.
[1]. https://download.01.org/0day-ci/archive/20251119/202511190316.luI90kAo-lkp@intel.com/config
Cc: stable@vger.kernel.org
Signed-off-by: Yuli Wang <wangyl5933@chinaunicom.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now the optimized version of arch_dup_task_struct() for LoongArch
assumes 'thread' is the last member of 'task_struct'. But this is
not true if CONFIG_RANDSTRUCT is enabled after Linux-6.16.
So fix the arch_dup_task_struct() function for CONFIG_RANDSTRUCT by
copying the whole 'task_struct'.
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When CONFIG_RANDSTRUCT enabled, members of task_struct are randomized.
There is a chance that TASK_STACK_CANARY be out of 12bit immediate's
range and causes build errors. TASK_STACK_CANARY is naturally aligned,
so fix it by replacing ld.d/st.d with ldptr.d/stptr.d which have 14bit
immediates.
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511240656.0NaPcJs1-lkp@intel.com/
Suggested-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch has the bitrev.w instruction to reverse bits in a 32-bit
integer, thus there's no need to reverse the bytes and use bitrev.4b.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Without HAVE_ARCH_BITREVERSE, the architecture-optimized bit reverse
implementations in arch/loongarch/include/asm/bitrev.h are not used at
all.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Owing to Config4.MMUSizeExt and VTLB/FTLB MMU features later MIPSr2+
cores can have more than 64 TLB entries. Therefore allocate an array
for uniquification instead of placing too an small array on the stack.
Fixes: 35ad7e1815 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init")
Co-developed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v6.17+: 9f048fa487: MIPS: mm: Prevent a TLB shutdown on initial uniquification
Cc: stable@vger.kernel.org # v6.17+
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
A few last minute fixes came in this week:
- interrupt and gpio numbers in foud separate i.MX8 specific
devicetree files were wrong.
- The vector length property in the C906 CPU description
used the wrong unit.
- Two bugs with uninitialized stack variables in the tee
subsystem.
- Alexander Stein now maintains additional devicetree files.
-----BEGIN PGP SIGNATURE-----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=D1Mu
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes came in this week:
- interrupt and gpio numbers in foud separate i.MX8 specific
devicetree files were wrong
- The vector length property in the C906 CPU description used the
wrong unit
- Two bugs with uninitialized stack variables in the tee subsystem
- Alexander Stein now maintains additional devicetree files"
* tag 'soc-fixes-6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: dts: allwinner: d1: fix vlenb property
MAINTAINERS: Add entry for TQ-Systems AM335 device trees
tee: qcomtee: initialize result before use in release worker
arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity
tee: qcomtee: fix uninitialized pointers with free attribute
ARM: dts: nxp: imx6ul: correct SAI3 interrupt line
arm64: dts: imx8dxl-ss-conn: swap interrupts number of eqos
arm64: dts: imx8dxl: Correct pcie-ep interrupt number
Just one fix to correct the "thead,vlenb" property for the RISC-V based
D1 SoC family.
-----BEGIN PGP SIGNATURE-----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=OqKr
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Allwinner fixes for 6.18
Just one fix to correct the "thead,vlenb" property for the RISC-V based
D1 SoC family.
* tag 'sunxi-fixes-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: d1: fix vlenb property
- Avoid hardlockup when CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=n
- Fix regression in APEI/GHES error handling
- Fix MMIO timers when probed via ACPI
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmklutkQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPr2B/4oFfYxfwWjFVSQTsJjIDGg99gFJMomOTLg
ddGzVE71pPwD2pkRjSLLQ09Iuq21J7tlEWmr1XLL9AxGSso5pgysj9pOsg1l8uV6
2idsZC+fNHpWSrPTw1xqgsEZuAEQUycJ+6AbW12Xm/ydzJVnv2rWiTw0BesWVKFw
8wGZyBz0FKS7HPMVSCKESNdGmfr1UgM0wsvs+Sn6cwDOfg/3ol+FjvwD0xtA7d4x
MogkDtI6KBU+QpfFvSgqOk+NQZ45naOImNHIbJ6bA27FsyWab5j1/PDX3+jFADRe
5OBSGHzTNqagVzU5SmV3+wjLMIxQq4rPqKuWUa4Pwz8CC1uC1lkw
=+43c
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"We've got a revert due to one of the recent CCA commits breaking ACPI
firmware-based error reporting, a fix for a hard-lockup introduced by
a prior fix affecting non-default (CONFIG_EXPERT) configurations and
another ACPI fix for systems using MMIO-based timers.
Other than that, we're looking pretty good.
- Avoid hardlockup when CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=n
- Fix regression in APEI/GHES error handling
- Fix MMIO timers when probed via ACPI"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: proton-pack: Fix hard lockup when !MITIGATE_SPECTRE_BRANCH_HISTORY
ACPI: GTDT: Correctly number platform devices for MMIO timers
Revert "arm64: acpi: Enable ACPI CCEL support"
The "drop print" commit removed the whole branch and not just the print.
For some ARM64 cpus, this leads to hard lockup when
CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not enabled.
Fixes: 62e72463ca ("arm64: proton-pack: Drop print when !CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Will Deacon <will@kernel.org>
This reverts commit d02c2e45b1.
Mauro reports that this breaks APEI notifications on his QEMU setup
because the "reserved for firmware" region still needs to be writable
by Linux in order to signal _back_ to the firmware after processing
the reported error:
| {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
| ...
| [Firmware Warn]: GHES: Unhandled processor error type 0x02: cache error
| Unable to handle kernel write to read-only memory at virtual address ffff800080035018
| Mem abort info:
| ESR = 0x000000009600004f
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x0f: level 3 permission fault
| Data abort info:
| ISV = 0, ISS = 0x0000004f, ISS2 = 0x00000000
| CM = 0, WnR = 1, TnD = 0, TagAccess = 0
| GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
| swapper pgtable: 4k pages, 52-bit VAs, pgdp=00000000505d7000
| pgd=10000000510bc003, p4d=1000000100229403, pud=100000010022a403, pmd=100000010022b403, pte=0060000139b90483
| Internal error: Oops: 000000009600004f [#1] SMP
For now, revert the offending commit. We can presumably switch back to
PAGE_KERNEL when bringing this back in the future.
Link: https://lore.kernel.org/r/20251121224611.07efa95a@foz.lan
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
- Fix for Malta PCI MMIO breakage for SOC-it
- Fix TLB shutdown caused by iniital uniquification
- Fix random seg faults
-----BEGIN PGP SIGNATURE-----
iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmkiIKQaHHRzYm9nZW5k
QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHA+4A//VBaGVDaIbqwE1xzBdeUQ
j5yK4l9wbD4LO67DTN4eElouct/o48I1UbQSK3vBaBRlGKLEFK/2Pu1amh6VGWr9
SyI14AYlj0vX7C6nqSrGKL+/+1mA9pCQmpz4yshn+qnwoAqHjqs+enX3BiBh+L0j
1JJRyr8qGzQ8Xma80Bx5Jvst61a5AgQZvVf70nr/0LdoqjBkS6dqVKRHtA7VOqWd
SqX1/y7FeLt6oPmzRYCy7Kp7RNDJ9sIht7ZklznV1tUBdDTRpA8eUqeSSyUEe0/7
x79jj3/On7vg84shs3u+JU8jjrVuyXQcSJq2YRw9kEm0lJ2nd2YFS13SpnT4ZMNQ
qCyzfTELLQ+NvRNaiUWWj5RXdiSo2LrZNq/Qu2EsNaSz2YYkkmrAurGOd8rOcfka
59lKvoQ18Vt3Ok5EeaatAWANJhXpEodvScuGdzBocaJ8/mSBwUzd6Vit9fma6eJ2
o1evxG7rqhXo+fT3pfjkW9ueAzCwJvF+tXV47Ga3PLssZfBvGo90LhaMf8C+VQA+
WoSAHhHlhrjhpo0/8/Z5577LV0IyRhwcnoivphBAwuCNe6SQrkKDrnx6xbemwbM1
biCbMaknli72c/KfptoOtBJYyZdEkgCigsB9unBHFXtExreoCo0PEAoJIv0GZs4M
3y7EIgkwib7OZCU2cA4/hkA=
=caJE
-----END PGP SIGNATURE-----
Merge tag 'mips-fixes_6.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix CPU type in DT for econet
- Fix for Malta PCI MMIO breakage for SOC-it
- Fix TLB shutdown caused by iniital uniquification
- Fix random seg faults due to missed vdso storage requirement
* tag 'mips-fixes_6.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kernel: Fix random segmentation faults
MIPS: mm: Prevent a TLB shutdown on initial uniquification
mips: dts: econet: fix EN751221 core type
MIPS: Malta: Fix !EVA SOC-it PCI MMIO
- Correct the MIPS RISC-V/JEDEC vendor ID.
- Fix the system shutdown behavior in the legacy case where
CONFIG_RISCV_SBI_V01 is set, but the firmware implementation doesn't
support the older v0.1 system shutdown method.
- Align some tools/ macro definitions with the corresponding kernel headers.
-----BEGIN PGP SIGNATURE-----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=aw1W
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Correct the MIPS RISC-V/JEDEC vendor ID
- Fix the system shutdown behavior in the legacy case where
CONFIG_RISCV_SBI_V01 is set, but the firmware implementation
doesn't support the older v0.1 system shutdown method
- Align some tools/ macro definitions with the corresponding
kernel headers
* tag 'riscv-for-linus-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
tools: riscv: Fixed misalignment of CSR related definitions
riscv: sbi: Prefer SRST shutdown over legacy
riscv: Update MIPS vendor id to 0x127
-----BEGIN PGP SIGNATURE-----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=rVXC
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Use UAPI types in ptrace UAPI header to fix nolibc ptrace.
Fix CPU name display, NUMA node parsing, kexec/kdump, PCI init and BPF
trampoline"
* tag 'loongarch-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: BPF: Disable trampoline for kernel module function trace
LoongArch: Don't panic if no valid cache info for PCI
LoongArch: Mask all interrupts during kexec/kdump
LoongArch: Fix NUMA node parsing with numa_memblks
LoongArch: Consolidate CPU names in /proc/cpuinfo
LoongArch: Use UAPI types in ptrace UAPI header
Commit 69896119dc ("MIPS: vdso: Switch to generic storage
implementation") switches to a generic vdso storage, which increases
the number of data pages from 1 to 4. But there is only one page
reserved, which causes segementation faults depending where the VDSO
area is randomized to. To fix this use the same size of reservation
and allocation of the VDSO data pages.
Fixes: 69896119dc ("MIPS: vdso: Switch to generic storage implementation")
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Depending on the particular CPU implementation a TLB shutdown may occur
if multiple matching entries are detected upon the execution of a TLBP
or the TLBWI/TLBWR instructions. Given that we don't know what entries
we have been handed we need to be very careful with the initial TLB
setup and avoid all these instructions.
Therefore read all the TLB entries one by one with the TLBR instruction,
bypassing the content addressing logic, and truncate any large pages in
place so as to avoid a case in the second step where an incoming entry
for a large page at a lower address overlaps with a replacement entry
chosen at another index. Then preinitialize the TLB using addresses
outside our usual unique range and avoiding clashes with any entries
received, before making the usual call to local_flush_tlb_all().
This fixes (at least) R4x00 cores if TLBP hits multiple matching TLB
entries (SGI IP22 PROM for examples sets up all TLBs to the same virtual
address).
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 35ad7e1815 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init")
Cc: stable@vger.kernel.org
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # Boston I6400, M5150 sim
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The current LoongArch BPF trampoline implementation is incompatible
with tracing functions in kernel modules. This causes several severe
and user-visible problems:
* The `bpf_selftests/module_attach` test fails consistently.
* Kernel lockup when a BPF program is attached to a module function [1].
* Critical kernel modules like WireGuard experience traffic disruption
when their functions are traced with fentry [2].
Given the severity and the potential for other unknown side-effects, it
is safest to disable the feature entirely for now. This patch prevents
the BPF subsystem from allowing trampoline attachments to kernel module
functions on LoongArch.
This is a temporary mitigation until the core issues in the trampoline
code for kernel module handling can be identified and fixed.
[root@fedora bpf]# ./test_progs -a module_attach -v
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_module_attach:PASS:skel_open 0 nsec
test_module_attach:PASS:set_attach_target 0 nsec
test_module_attach:PASS:set_attach_target_explicit 0 nsec
test_module_attach:PASS:skel_load 0 nsec
libbpf: prog 'handle_fentry': failed to attach: -ENOTSUPP
libbpf: prog 'handle_fentry': failed to auto-attach: -ENOTSUPP
test_module_attach:FAIL:skel_attach skeleton attach failed: -524
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
[1]: https://lore.kernel.org/loongarch/CAK3+h2wDmpC-hP4u4pJY8T-yfKyk4yRzpu2LMO+C13FMT58oqQ@mail.gmail.com/
[2]: https://lore.kernel.org/loongarch/CAK3+h2wYcpc+OwdLDUBvg2rF9rvvyc5amfHT-KcFaK93uoELPg@mail.gmail.com/
Cc: stable@vger.kernel.org
Fixes: f9b6b41f0c ("LoongArch: BPF: Add basic bpf trampoline support")
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If there is no valid cache info detected (may happen in virtual machine)
for pci_dfl_cache_line_size, kernel shouldn't panic. Because in the PCI
core it will be evaluated to (L1_CACHE_BYTES >> 2).
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If the default state of the interrupt controllers in the first kernel
don't mask any interrupts, it may cause the second kernel to potentially
receive interrupts (which were previously allocated by the first kernel)
immediately after a CPU becomes online during its boot process. These
interrupts cannot be properly routed, leading to bad IRQ issues.
This patch calls machine_kexec_mask_interrupts() to mask all interrupts
during the kexec/kdump process.
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
On physical machine, NUMA node id comes from high bit 44:48 of physical
address. However it is not true on virt machine. With general method, it
comes from ACPI SRAT table.
Here the common function numa_memblks_init() is used to parse NUMA node
information with numa_memblks.
Cc: <stable@vger.kernel.org>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Some processors have no IOCSR.VENDOR and IOCSR.CPUNAME, some processors
have these registers but there is no valid information.
Consolidate CPU names in /proc/cpuinfo:
1. Add "PRID" to display the PRID & Core-Name;
2. Let "Model Name" display "Unknown" if no valid name.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The kernel UAPI headers already contain fixed-width integer types, there
is no need to rely on the libc types. There may not be a libc available
or the libc may not provides the <stdint.h>, like for example on nolibc.
This also aligns the header with the rest of the LoongArch UAPI headers.
Fixes: 803b0fc5c3 ("LoongArch: Add process management")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
These are mainly devicetree fixes for the arm platforms from Rockchips
NXP, ASpeed and Broadcom, addressing issues with accidental overclocking,
pinctrl, network and dtc warnings.
There are additional fixes for regressions with the i.MX reset and memory
controller drivers as well as the Tegra memory controller driver
Minor updates to the MAINTAINERS file, tee documentation and defconfigs
bring those up to date with recent changes elsewhere.
-----BEGIN PGP SIGNATURE-----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=5SRf
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are mainly devicetree fixes for the arm platforms from Rockchips
NXP, ASpeed and Broadcom, addressing issues with accidental
overclocking, pinctrl, network and dtc warnings.
There are additional fixes for regressions with the i.MX reset and
memory controller drivers as well as the Tegra memory controller
driver.
Minor updates to the MAINTAINERS file, tee documentation and
defconfigs bring those up to date with recent changes elsewhere"
* tag 'soc-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
MAINTAINERS: sync omap devicetree maintainers with omap platform
MAINTAINERS: Update Krzysztof Kozlowski's email
arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on orangepi-5
arm64: dts: rockchip: disable HS400 on RK3588 Tiger
arm64: dts: rockchip: drop reset from rk3576 i2c9 node
tee: <uapi/linux/tee.h: fix all kernel-doc issues
arm64: dts: rockchip: Fix USB power enable pin for BTT CB2 and Pi2
arm64: dts: broadcom: bcm2712: rpi-5: Add ethernet0 alias
arm64: dts: broadcom: Assign clock rates in eth node for RPi5
reset: imx8mp-audiomix: Fix bad mask values
ARM: dts: BCM53573: Fix address of Luxul XAP-1440's Ethernet PHY
arm64: defconfig: Fix V3D deferred probe timeout
arm64: dts: rockchip: Fix vccio4-supply on rk3566-pinetab2
arm64: dts: rockchip: include rk3399-base instead of rk3399 in rk3399-op1
arm64: dts: imx8mp-kontron: Fix USB OTG role switching
arm64: dts: imx95: Fix MSI mapping for PCIe endpoint nodes
arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred
arm: imx_v6_v7_defconfig: enable ext4 directly
memory: tegra210: Fix incorrect client ids
arm64: dts: rockchip: Fix indentation on rk3399 haikou demo dtso
...
The 'pmu' pointer cannot be NULL, as it is taken as a pointer to an array.
Remove the superfluous NULL check.
Found by Coverity: CID#1497507.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Liang Kan <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20251119091538.825307-1-jirislaby@kernel.org
cpu OPPs from rk3576 (not supported in newer vendor TF-A and never
supported in upstream TF-A). As well as some DTS validation fixes
and one pinctrl fix for the odroid-m1.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmkZpf8QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgff6CACnCa3tpWDB/nLRQNd8iBWlzk323yA94DB2
k2I9ZoSvOfMZ2KWbpfEk2ODW40jSMWEZEIJg2SDX7yagfmH1ZNtNuTi3Q48HcDmv
z79Pxqt512/umysRjPrr5rXBRywG7WWybjbYYpeLLdkvYQg/jfoiLeB7sHGUvRMV
aFRp7SIaEKVWTx2BptcrUmu6HSO6tVMRuAHB+7HRTpIU71SXULbnva4qOsmaGpDx
dNNX8XKiYzHdpx6Ip9MbWCDjYnysJiEo+cldwrRmHzRv4n56vCbA/oXrNB9v03I4
TFqQvSPAe+FA64gmqUaKx1jeUL54tf8L/GldDn7+n3xDjB59TE/E
=rVu+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=KB+O
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Regulator/supply fixes for a number of boards, removed too fast
cpu OPPs from rk3576 (not supported in newer vendor TF-A and never
supported in upstream TF-A). As well as some DTS validation fixes
and one pinctrl fix for the odroid-m1.
* tag 'v6.18-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on orangepi-5
arm64: dts: rockchip: disable HS400 on RK3588 Tiger
arm64: dts: rockchip: drop reset from rk3576 i2c9 node
arm64: dts: rockchip: Fix USB power enable pin for BTT CB2 and Pi2
arm64: dts: rockchip: Fix vccio4-supply on rk3566-pinetab2
arm64: dts: rockchip: include rk3399-base instead of rk3399 in rk3399-op1
arm64: dts: rockchip: Fix indentation on rk3399 haikou demo dtso
arm64: dts: rockchip: Make RK3588 GPU OPP table naming less generic
arm64: dts: rockchip: Drop 'rockchip,grf' prop from tsadc on rk3328
arm64: dts: rockchip: Remove non-functioning CPU OPPs from RK3576
arm64: dts: rockchip: Fix PCIe power enable pin for BigTreeTech CB2 and Pi2
arm64: dts: rockchip: Set correct pinctrl for I2S1 8ch TX on odroid-m1
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Only adjust the ID registers when no irqchip has been created once
per VM run, instead of doing it once per vcpu, as this otherwise
triggers a pretty bad conbsistency check failure in the sysreg code.
- Make sure the per-vcpu Fine Grain Traps are computed before we load
the system registers on the HW, as we otherwise start running without
anything set until the first preemption of the vcpu.
x86:
- Fix selftests failure on AMD, checking for an optimization that was not
happening anymore.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmkcpToUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMG4AgAl68nLWOdc6iRq/JRiiTOEx/urykc
/nKqUz7YlefEbOB64F/ZADvmluIOTs85/bdutCTO/VzJ8lkimyhISygZzA/y6Gav
XgAIekZ/QhriIqqfcrMGET+ug3EnOxCAo/M8kWmBtra7EPTrejUJhKtensBd4TXv
GTcU+yxZJF7jLE84a8CuWVbHdSfyiLYP5V6cDeMtuqvZiR5cxqyzuL+KFri4jZ72
2jxovTRpxjOh4n759Oe+eqEhl6tgWBEfOVvDMOP7hkcFGlFpsIkKGL5zR0b+xFNr
jAm5AGbJMY8n8qSM2s0OS0+Md/3kiyhvL121XmV0iGRRc1Ceq3SWFB5pRg==
=5CNi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Only adjust the ID registers when no irqchip has been created once
per VM run, instead of doing it once per vcpu, as this otherwise
triggers a pretty bad conbsistency check failure in the sysreg code
- Make sure the per-vcpu Fine Grain Traps are computed before we load
the system registers on the HW, as we otherwise start running
without anything set until the first preemption of the vcpu
x86:
- Fix selftests failure on AMD, checking for an optimization that was
not happening anymore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Fix redundant updates of LBR MSR intercepts
KVM: arm64: VHE: Compute fgt traps before activating them
KVM: arm64: Finalize ID registers only once per VM
Don't update the LBR MSR intercept bitmaps if they're already up-to-date,
as unconditionally updating the intercepts forces KVM to recalculate the
MSR bitmaps for vmcb02 on every nested VMRUN. The redundant updates are
functionally okay; however, they neuter an optimization in Hyper-V
nested virtualization enlightenments and this manifests as a self-test
failure.
In particular, Hyper-V lets L1 mark "nested enlightenments" as clean, i.e.
tell KVM that no changes were made to the MSR bitmap since the last VMRUN.
The hyperv_svm_test KVM selftest intentionally changes the MSR bitmap
"without telling KVM about it" to verify that KVM honors the clean hint,
correctly fails because KVM notices the changed bitmap anyway:
==== Test Assertion Failure ====
x86/hyperv_svm_test.c:120: vmcb->control.exit_code == 0x081
pid=193558 tid=193558 errno=4 - Interrupted system call
1 0x0000000000411361: assert_on_unhandled_exception at processor.c:659
2 0x0000000000406186: _vcpu_run at kvm_util.c:1699
3 (inlined by) vcpu_run at kvm_util.c:1710
4 0x0000000000401f2a: main at hyperv_svm_test.c:175
5 0x000000000041d0d3: __libc_start_call_main at libc-start.o:?
6 0x000000000041f27c: __libc_start_main_impl at ??:?
7 0x00000000004021a0: _start at ??:?
vmcb->control.exit_code == SVM_EXIT_VMMCALL
Do *not* fix this by skipping svm_hv_vmcb_dirty_nested_enlightenments()
when svm_set_intercept_for_msr() performs a no-op change. changes to
the L0 MSR interception bitmap are only triggered by full CPUID updates
and MSR filter updates, both of which should be rare. Changing
svm_set_intercept_for_msr() risks hiding unintended pessimizations
like this one, and is actually more complex than this change.
Fixes: fbe5e5f030 ("KVM: nSVM: Always recalculate LBR MSR intercepts in svm_update_lbrv()")
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251112013017.1836863-1-yosry.ahmed@linux.dev
[Rewritten commit message based on mailing list discussion. - Paolo]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Only adjust the ID registers when no irqchip has been created once
per VM run, instead of doing it once per vcpu, as this otherwise
triggers a pretty bad conbsistency check failure in the sysreg code.
- Make sure the per-vcpu Fine Grain Traps are computed before we load
the system registers on the HW, as we otherwise start running without
anything set until the first preemption of the vcpu.
-----BEGIN PGP SIGNATURE-----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=MCeE
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.18, take #3
- Only adjust the ID registers when no irqchip has been created once
per VM run, instead of doing it once per vcpu, as this otherwise
triggers a pretty bad conbsistency check failure in the sysreg code.
- Make sure the per-vcpu Fine Grain Traps are computed before we load
the system registers on the HW, as we otherwise start running without
anything set until the first preemption of the vcpu.
The recent fix to properly initialize the tags of the huge zero folio
had an unfortunate not-so-subtle side effect: it caused the actual
*contents* of the huge zero folio to not be initialized at all when the
hardware didn't support the memory tagging.
The reason was the unfortunate semantics of tag_clear_highpage(): on
hardware that didn't do the tagging, it would silently just not do
anything at all. And since this is done only on arm64 with MTE support,
that basically meant most hardware.
It wasn't necessarily immediately obvious since the huge zero page isn't
necessarily very heavily used - or because it might already be zero
because all-zeroes is the most common pattern. But it ends up causing
random odd user space failures when you do hit it.
The unfortunate semantics have been around for a while, but became a
real bug only when we started actively using __GFP_ZEROTAGS in the
generic get_huge_zero_folio() function - before that, it had only ever
been used in code that checked that the hardware supported it.
Fix this by simply changing the semantics of tag_clear_highpage() to
return whether it actually successfully did something or not. While at
it, also make it initialize multiple pages in one go, since that's
actually what the only caller wants it to do and it simplifies the whole
logic.
Fixes: adfb6609c6 ("mm/huge_memory: initialise the tags of the huge zero folio")
Link: https://lore.kernel.org/all/20251117082023.90176-1-00107082@163.com/
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reported-and-tested-by: David Wang <00107082@163.com>
Reported-and-tested-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All are singletons - please see the respective changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaRoauQAKCRDdBJ7gKXxA
jtNFAQDEMH0+zRGz/Larkf9cgmdKcDgij1DP2gP/3i8PWAoaGQD8C9evZxu1h9wC
rFbaSkPDeSdDafo3RZfpo1gqE0LdEA4=
=oew8
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-11-16-10-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. 5 are cc:stable, 4 are against mm/
All are singletons - please see the respective changelogs for details"
* tag 'mm-hotfixes-stable-2025-11-16-10-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm, swap: fix potential UAF issue for VMA readahead
selftests/user_events: fix type cast for write_index packed member in perf_test
lib/test_kho: check if KHO is enabled
mm/huge_memory: fix folio split check for anon folios in swapcache
MAINTAINERS: update David Hildenbrand's email address
crash: fix crashkernel resource shrink
mm: fix MAX_FOLIO_ORDER on powerpc configs with hugetlb
Currently, the sbi_init() always attempts to register the legacy shutdown
function as the sys-off handler which is fine when RISCV_SBI_V01 is not
enabled. However, if RISCV_SBI_V01 is enabled in the kernel and the SBI
v0.1 is not supported by the underlying SBI implementation then the
legacy shutdown fails. Fix this by not registering the legacy shutdown
when SRST shutdown is available.
Fixes: 70ddf86d76 ("riscv: sbi: Switch to new sys-off handler API")
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://patch.msgid.link/20251114065808.304430-1-mchitale@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>