Commit graph

300,237 commits

Author SHA1 Message Date
Arik Nemtsov
6246ca003f wl12xx: reset link Tx queues when freeing it
Before, the link was first freed (invalidating it in the map), and later
on vif removal, all valid wlvif-related links were reset. Since these
links were already invalid, we failed to reset them.
The bug was made worse by op_stop, which set the tx_queue_count to 0
arbitrarily. This resulted in a negative tx_queue_count in some scenarios.

Fix this by resetting the Tx-queues of a link when freeing it. Add a
WARN_ON and reset all link Tx-queues in op_stop, to avoid a negative
tx_queue_count.

[changed WARN_ON to WARN_ON_ONCE -- Luca]

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-28 13:24:45 +02:00
Arik Nemtsov
0b0e32b792 wl12xx: change bits in the link_map under spin lock
These bits are used in op_tx to determine if a packet should be dropped.
As such we should use the spin lock to sync the state.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-28 13:19:19 +02:00
Arik Nemtsov
5af70c864a wl12xx: set the ELP entry delay to the FW dyn-ps timeout
With PSM handled in FW, the checks in wl1271_elp_work() are always true.
Thus during active traffic we constantly enter and exit ELP (many times
per second). As each ELP exit takes ~10ms, this can have an adverse
effect on throughput and interactivity.
Set the ELP timeout to the dyn-ps timeout. This period is longer and
avoids the above problem. It also makes sense to stay out of ELP while
we are awake on the network, to minimize delays in Tx/Rx. The same thing
was done by the mac80211 dynamic-ps mechanism before the FW DPS changes.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-28 13:19:19 +02:00
Takashi Iwai
a6f2fd557f ALSA: hda - Add position_fix=4 (COMBO) option
This patch adds a new position_fix option value, 4, as a combo mode
to use LPIB for playbacks and POSBUF for captures.  It's the way
recommended by Intel hardware guys.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-28 12:18:15 +01:00
Sven Eckelmann
7c64fd98ce batman-adv: Fix indentation of multiline statements
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-28 19:14:31 +08:00
Javier Martin
52f1a845e2 [media] MX2: Add platform definitions for eMMa-PrP device
eMMa-PrP device included in Freescale i.MX2 chips can also
be used separately to process memory buffers. This patch
provides arch glue code for the driver which provides this
functionality.

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-28 07:20:32 -03:00
Javier Martin
8091cb7d9c [media] MEM2MEM: Add support for eMMa-PrP mem2mem operations
i.MX2x SoCs have a PrP which is capable of resizing and format
conversion of video frames. This driver provides support for
resizing and format conversion from YUYV to YUV420.

This operation is of the utmost importance since some of these
SoCs like i.MX27 include an H.264 video codec which only
accepts YUV420 as input.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-28 07:19:24 -03:00
Steven Whitehouse
a365fbf354 GFS2: Read resource groups on mount
This makes mount take slightly longer, but at the same time, the first
write to the filesystem will be faster too. It also means that if there
is a problem in the resource index, then we can refuse to mount rather
than having to try and report that when the first write occurs.

In addition, to avoid recursive locking, we hvae to take account of
instances when the rindex glock may already be held when we are
trying to update the rbtree of resource groups.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 09:52:39 +00:00
Bob Peterson
9e73f571ea GFS2: Ensure rindex is uptodate for fallocate
This patch fixes a problem whereby gfs2_grow was failing and causing GFS2
to assert. The problem was that when GFS2's fallocate operation tried to
acquire an "allocation" it made sure the rindex was up to date, and if not,
it called gfs2_rindex_update. However, if the file being fallocated was
the rindex itself, it was already locked at that point. By calling
gfs2_rindex_update at an earlier point in time, we bring rindex up to date
and thereby avoid trying to lock it when the "allocation" is acquired.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 09:48:30 +00:00
Bob Peterson
718b97bd6b GFS2: Read in rindex if necessary during unlink
This patch fixes a problem whereby you were unable to delete
files until other file system operations were done (such as
statfs, touch, writes, etc.) that caused the rindex to be
read in.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 09:48:02 +00:00
Steven Whitehouse
4043b886b0 GFS2: Fix race between lru_list and glock ref count
This patch fixes a narrow race window between the glock ref count
hitting zero and glocks being removed from the lru_list.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 09:43:07 +00:00
Ingo Molnar
8bd69c2d5f x86/x32: Fix the binutils auto-detect
Fix:

 arch/x86/Makefile:96: *** recipe commences before first target.  Stop.

Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: H. J. Lu <hjl.tools@gmail.com>
Link: http://lkml.kernel.org/r/1329696488-16970-1-git-send-email-hpa@zytor.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-28 10:35:06 +01:00
Ingo Molnar
e24b90b282 Merge branch 'tip/x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into x86/asm 2012-02-28 10:28:24 +01:00
Ingo Molnar
458ce2910a Merge branch 'linus' into x86/asm
Sync up the latest NMI fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-28 10:27:36 +01:00
Viresh Kumar
f79e30a809 Input: spear-keyboard - provide thaw and poweroff routines
Thaw and poweroff routines are missing for spear-keyboard. They are
required for:
- Error case scenarios during freeze
- Using test features, of hibernate.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-28 01:18:32 -08:00
Rajeev Kumar
f8354c60ca Input: spear-keyboard - configure device according to supplied mode
Let platform pass mode information to keyboard driver according to which
it configures itself. The mode can be
 - KEYPAD_9x9     0
 - KEYPAD_6x6     1
 - KEYPAD_2x2     2

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-28 01:18:32 -08:00
Rajeev Kumar
5e238b548a Input: spear-keyboard - add 6x6 keypad matrix definitions
Add 6x6 keypad matrix and rename 9x9 keymap

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-28 01:18:31 -08:00
Rajeev Kumar
868a719e9d Input: spear-keyboard - delete redundant key definitions from 9x9 keyboard
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-28 01:18:31 -08:00
Ingo Molnar
bdd4431c8d Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
The major features of this series are:

 - making RCU more aggressive about entering dyntick-idle mode in order to
   improve energy efficiency

 - converting a few more call_rcu()s to kfree_rcu()s

 - applying a number of rcutree fixes and cleanups to rcutiny

 - removing CONFIG_SMP #ifdefs from treercu

 - allowing RCU CPU stall times to be set via sysfs

 - adding CPU-stall capability to rcutorture

 - adding more RCU-abuse diagnostics

 - updating documentation

 - fixing yet more issues located by the still-ongoing top-to-bottom
   inspection of RCU, this time with a special focus on the
   CPU-hotplug code path.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-28 10:16:10 +01:00
Vasanthakumar Thiagarajan
faaf192908 ath6kl: Register driver ht capabilities in wiphy
Register driver's ht capabilities in wiphy to avoid failures
in setting ht channels from hostapd.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-02-28 11:13:44 +02:00
Namhyung Kim
30ce2f7eef perf/hwbp: Fix a possible memory leak
If kzalloc() for TYPE_DATA failed on a given cpu, previous chunk
of TYPE_INST will be leaked. Fix it.

Thanks to Peter Zijlstra for suggesting this better solution. It
should work as long as the initial value of the region is all
0's and that's the case of static (per-cpu) memory allocation.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/1330391978-28070-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-28 09:52:54 +01:00
Raja Mani
4480bb5936 ath6kl: Lower SDIO pad drive strength for hw2.1.1 board
Without this change, SDIO shuts down due to CRC error during
data communication to the firmware in some of the platform.
for example, scan request issued to the firmware doesn't
return scan completed events and cause the socket interface
to always return -16 (device busy).

SDIO pad drive strength should be reduced for hw2.1.1 board
to avoid such errors.

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-02-28 10:44:03 +02:00
Vasanthakumar Thiagarajan
13423c3119 ath6kl: Make foreground scan a deterministic one
This makes the device get into scan state as soon as a
scan request is received, instead of blocking the scan
request till the traffic comes down. It is  necessary
for the deterministic foreground scan particularly when
having multiple vif operating where, if the scan is non-
deterministic, scan on one interface will not start
as long as there are traffic on the other interface. This
change passes 50 msec as foreground scan interval to fix this.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-02-28 10:39:39 +02:00
Phil Sutter
f8f54e190d crypto: mv_cesa - fix final callback not ignoring input data
Broken by commit 6ef84509f3 for users
passing a request with non-zero 'nbytes' field, like e.g. testmgr.

Cc: <stable@kernel.org> # 3.0+
Signed-off-by: Phil Sutter <phil.sutter@viprinet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-02-28 16:29:23 +08:00
Dave Airlie
e2bc96aeff Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel into HEAD
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel:
  drm/i915: Remove use of the autoreported ringbuffer HEAD position
  drm/i915: Prevent a machine hang by checking crtc->active before loading lut
  drm/i915: fix operator precedence when enabling RC6p
  drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0
  drm/i915: fix mode set on load pipe. (v2)
2012-02-28 08:20:14 +00:00
Vasanthakumar Thiagarajan
5378f244b6 ath6kl: Fix memory leak of rx packets in endpoint 0
htc_packet and htc_packet->buf_start are separately allocated
for endpoint 0. This is different for other endpoints where
packets are allocated as skb where htc_packet is skb->head
and they are freed properly. Free htc_packet and htc_packet->buf_start
separatly for endpoint 0.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-02-28 09:45:51 +02:00
Vasanthakumar Thiagarajan
bd5b5ac287 ath6kl: Make sure to allocate rx buffers after the endpoint connection
Rx buffers should be allocated for control and best effort endpoints only
after the enpoints connection is esablished. But this is done before the
endpoint connection is complete, we don't even the control and BE endpoints
that time. Move the buffer allocation after endpoint connection is over,
after ath6kl_init_hw_start(). Found in review, never seen any real issue
with this.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-02-28 09:45:50 +02:00
Michael S. Tsirkin
ea5d404655 vhost: fix release path lockdep checks
We shouldn't hold any locks on release path. Pass a flag to
vhost_dev_cleanup to use the lockdep info correctly.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
2012-02-28 09:13:22 +02:00
Nadav Har'El
d550dda192 vhost: don't forget to schedule()
This is a tiny, but important, patch to vhost.

Vhost's worker thread only called schedule() when it had no work to do, and
it wanted to go to sleep. But if there's always work to do, e.g., the guest
is running a network-intensive program like netperf with small message sizes,
schedule() was *never* called. This had several negative implications (on
non-preemptive kernels):

 1. Passing time was not properly accounted to the "vhost" process (ps and
    top would wrongly show it using zero CPU time).

 2. Sometimes error messages about RCU timeouts would be printed, if the
    core running the vhost thread didn't schedule() for a very long time.

 3. Worst of all, a vhost thread would "hog" the core. If several vhost
    threads need to share the same core, typically one would get most of the
    CPU time (and its associated guest most of the performance), while the
    others hardly get any work done.

The trivial solution is to add

	if (need_resched())
		schedule();

After doing every piece of work. This will not do the heavy schedule() all
the time, just when the timer interrupt decided a reschedule is warranted
(so need_resched returns true).

Thanks to Abel Gordon for this patch.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-02-28 09:13:19 +02:00
Michael S. Tsirkin
b17d5c6e19 tools/virtio: stub out strong barriers
The tool should never use them, abort if it does.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-02-28 09:13:16 +02:00
Michael S. Tsirkin
b0820a50a0 tools/virtio: add linux/hrtimer.h stub
Make tool build after virtio changes broke it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-02-28 09:13:14 +02:00
Michael S. Tsirkin
11b8990d19 tools/virtio: add linux/module.h stub
Make the tool build again after virtio changes broke it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-02-28 09:13:12 +02:00
Vitaliy Kulikov
5556e14708 ALSA: hda - Fix audio playback support on HP Zephyr system
Enables port E of IDT 92HD91 codec as output and sets correct output
phase between ports E and D and high pass filter.

Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-28 07:29:40 +01:00
Haojian Zhuang
4128e27584 ARM: mmp: enable rtc in pxa910
Support rtc-sa1100 driver in pxa910.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-28 11:23:09 +08:00
Haojian Zhuang
43de6a7dda ARM: pxa: add dummy clock for pxa25x and pxa27x
gpio-pxa driver is shared among arch-pxa and arch-mmp. Clock is the
essential component on pxa3xx/pxa95x and arch-mmp. So we need to
define dummy clock in pxa25x/pxa27x instead.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-28 10:57:48 +08:00
Haojian Zhuang
93413c36d0 ARM: mmp: append irq name of gpio device
IRQ name is required in gpio-pxa driver. So we need to append the name
in gpio device. Otherwise, we can't register gpio-pxa driver
successfully.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-28 10:21:56 +08:00
Paul Parsons
9a01ec304d pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values
The hx4700 platform has 72 board gpios: 64 ASIC3 gpios numbered 192..255, and
8 EGPIO gpios numbered 256..263 (plus a 9th which is not used).
Thus the new CONFIG_ARCH_NR_GPIO config option must be set to 264.

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-02-28 10:21:08 +08:00
Paul Parsons
91cb8ee33f pxa/hx4700: Add ASIC3 LED support
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform.

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-02-28 10:20:49 +08:00
Paul Parsons
11407e5713 pxa/hx4700: Correct StrataFlash block size discovery
The HP iPAQ hx4700 has 128Mb of flash provided by two Intel StrataFlash devices.
The hx4700 platform configuration defines a single 128Mb flash resource,
resulting in the MTD physmap-flash driver probing the first device only and
presuming the second device is identical:

physmap platform flash device: 08000000 at 00000000
physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008816
physmap-flash: Found 2 x16 devices at 0x4000000 in 32-bit bank
<snip>
erase region 0: offset=0x0,size=0x10000,blocks=4
erase region 1: offset=0x40000,size=0x40000,blocks=255
erase region 2: offset=0x4000000,size=0x10000,blocks=4
erase region 3: offset=0x4040000,size=0x40000,blocks=255
physmap-flash: 2 set(s) of 2 interleaved chips --> 32 partitions of 4096 KiB

Unfortunately the two devices are not identical. The first has a device ID of
0x8816, identifying a bottom parameter device. The second has a device ID of
0x8813, identifying a top parameter device. By not probing the second device,
physmap-flash does not discover the correct block sizes.

This patch splits the configuration into two 64Mb flash resources, forcing
physmap-flash to probe both devices and thus discover the correct block sizes:

physmap platform flash device: 04000000 at 00000000
physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008816
<snip>
erase region 0: offset=0x0,size=0x10000,blocks=4
erase region 1: offset=0x40000,size=0x40000,blocks=255
physmap-flash: 1 set(s) of 2 interleaved chips --> 16 partitions of 4096 KiB
physmap platform flash device: 04000000 at 04000000
physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008813
<snip>
erase region 0: offset=0x0,size=0x40000,blocks=255
erase region 1: offset=0x3fc0000,size=0x10000,blocks=4
physmap-flash: 1 set(s) of 2 interleaved chips --> 16 partitions of 4096 KiB
Concatenating MTD devices:
(0): "physmap-flash"
(1): "physmap-flash"
into device "physmap-flash"

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-02-28 10:20:35 +08:00
Haojian Zhuang
8e8bbcb368 rtc: sa1100: enable clk support
Enable clock support on rtc-sa1100.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-28 10:13:52 +08:00
Haojian Zhuang
3e12ec7714 ARM: pxa: add rtc dummy clock
sa1100-rtc driver could be shared among sa1100/pxa/mmp series silicon.
Since clk is used in mmp series silicon, add dummy clock support in
pxa also.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-28 10:13:34 +08:00
Jett.Zhou
4a8f83409d ARM: sa1100: clean up clock support
Add rtc clock support and clean clock support for gpio.

Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-28 10:08:07 +08:00
Haojian Zhuang
3888c09074 rtc: sa1100: declare irq in resource
Avoid to hard coded irq in rtc-sa1100 driver since we could share
it among arch-sa1100/arch-pxa/arch-mmp.

We still keep hard coded register address since the requirement is
enabling both rtc-sa1100 and rtc-pxa driver. The register addresses
are conflict since they're only two wrappers on the same rtc device.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 10:07:50 +08:00
Haojian Zhuang
1d8c38c3d1 rtc: sa1100: remove verification code of alarm
Since next alarm time is already calculated in rtc common interface, we
needn't keep this logic in rtc-sa1100.c any more.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-28 10:07:22 +08:00
Haojian Zhuang
61ee93cd18 rtc: sa1100: remove periodic code
Since periodic timer is already supported by hrtimer in rtc interface,
we needn't keep the duplicated code in rtc-sa1100.c any more.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-28 10:05:20 +08:00
Johan Hedberg
02b7cc62b6 Bluetooth: Use LMP_HOST_SSP define instead of magic values
This patch fixes the code to use the proper LMP_HOST_SSP define instead
of magic values and thereby makes the code more readable.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-28 02:30:00 +02:00
Paul Gortmaker
15839b4774 [IA64] Fix a couple of warnings for EXPORT_SYMBOL
To get rid of things like:

arch/ia64/sn/kernel/sn2/sn_hwperf.c:1002:1: warning: data definition has no type or storage class
arch/ia64/sn/kernel/sn2/sn_hwperf.c:1002:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
arch/ia64/sn/kernel/sn2/sn_hwperf.c:1002:1: warning: parameter names (without types) in function declaration

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-02-27 16:20:09 -08:00
Johan Hedberg
cc2c04ec1e Bluetooth: Add missing host features definitions
This patch adds missing SSP and "Simultaneous LE & BR/EDR" feature bit
definitions to hci.h.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-28 02:06:20 +02:00
Randy Dunlap
a69f158902 security: fix ima kconfig warning
Fix IMA kconfig warning on non-X86 architectures:

warning: (IMA) selects TCG_TIS which has unmet direct dependencies
(TCG_TPM && X86)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-02-28 11:01:15 +11:00
Johan Hedberg
8f984dfaf0 Bluetooth: Remove redundant read_host_features commands
Previously the write_le_enable would trigger a read_host_features
command but since we have access to the value LE support was set to we
can simply just clear or set the bit in hdev->host_features. This also
removes a second unnecessary read_host_features command from the device
initialization procedure since LE is only enabled after the first
read_host_features command completes.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-28 01:54:19 +02:00