Commit graph

360,772 commits

Author SHA1 Message Date
Jaegeuk Kim
408e937561 f2fs: revisit the f2fs_gc flow
I'd like to revisit the f2fs_gc flow and rewrite as follows.

1. In practical, the nGC parameter of f2fs_gc is meaningless. So, let's
  remove it.
2. Background GC marks victim blocks as dirty one at a time.
3. Foreground GC should do cleaning job until acquiring enough free
  sections. Afterwards, it needs to do checkpoint.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-10 07:42:59 +09:00
Lars-Peter Clausen
a02a8c42b5 staging:iio:adis16080: Perform sign extension
The adis16080 reports sample values in twos complement. So we need to perform a
sign extension on the result, otherwise negative values will be reported
incorrectly as large positive values.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-09 21:15:33 +00:00
Christian Borntraeger
b26ba22bb4 KVM: s390: Gracefully handle busy conditions on ccw_device_start
In rare cases a virtio command might try to issue a ccw before a former
ccw was answered with a tsch. This will cause CC=2 (busy). Lets just
retry in that case.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09 18:40:19 -02:00
Cornelia Huck
73fa21ea4f KVM: s390: Dynamic allocation of virtio-ccw I/O data.
Dynamically allocate any data structures like ccw used when
doing channel I/O. Otherwise, we'd need to add extra serialization
for the different callbacks using the same data structures.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09 18:40:18 -02:00
Fabio Estevam
7b7a4efe76 iio: mxs-lradc: indexes are unsigned
Fix the following warning when building with W=1 option:

drivers/staging/iio/adc/mxs-lradc.c: In function 'mxs_lradc_trigger_handler':
drivers/staging/iio/adc/mxs-lradc.c:244:2: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-09 20:06:22 +00:00
Avi Kivity
fb864fbc72 KVM: x86 emulator: convert basic ALU ops to fastop
Opcodes:
	TEST
	CMP
	ADD
	ADC
	SUB
	SBB
	XOR
	OR
	AND

Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09 17:39:30 -02:00
Avi Kivity
f7857f35db KVM: x86 emulator: add macros for defining 2-operand fastop emulation
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09 17:39:28 -02:00
Avi Kivity
45a1467d7e KVM: x86 emulator: convert NOT, NEG to fastop
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09 17:39:25 -02:00
Avi Kivity
75f728456f KVM: x86 emulator: mark CMP, CMPS, SCAS, TEST as NoWrite
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09 17:39:21 -02:00
Avi Kivity
b6744dc3fb KVM: x86 emulator: introduce NoWrite flag
Instead of disabling writeback via OP_NONE, just specify NoWrite.

Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09 17:39:18 -02:00
Avi Kivity
b7d491e7f0 KVM: x86 emulator: Support for declaring single operand fastops
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09 17:39:17 -02:00
Avi Kivity
e28bbd44da KVM: x86 emulator: framework for streamlining arithmetic opcodes
We emulate arithmetic opcodes by executing a "similar" (same operation,
different operands) on the cpu.  This ensures accurate emulation, esp. wrt.
eflags.  However, the prologue and epilogue around the opcode is fairly long,
consisting of a switch (for the operand size) and code to load and save the
operands.  This is repeated for every opcode.

This patch introduces an alternative way to emulate arithmetic opcodes.
Instead of the above, we have four (three on i386) functions consisting
of just the opcode and a ret; one for each operand size.  For example:

   .align 8
   em_notb:
	not %al
	ret

   .align 8
   em_notw:
	not %ax
	ret

   .align 8
   em_notl:
	not %eax
	ret

   .align 8
   em_notq:
	not %rax
	ret

The prologue and epilogue are shared across all opcodes.  Note the functions
use a special calling convention; notably eflags is an input/output parameter
and is not clobbered.  Rather than dispatching the four functions through a
jump table, the functions are declared as a constant size (8) so their address
can be calculated.

Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09 17:39:17 -02:00
Anderson Lizardo
0a9ab9bdb3 Bluetooth: Fix incorrect strncpy() in hidp_setup_hid()
The length parameter should be sizeof(req->name) - 1 because there is no
guarantee that string provided by userspace will contain the trailing
'\0'.

Can be easily reproduced by manually setting req->name to 128 non-zero
bytes prior to ioctl(HIDPCONNADD) and checking the device name setup on
input subsystem:

$ cat /sys/devices/pnp0/00\:04/tty/ttyS0/hci0/hci0\:1/input8/name
AAAAAA[...]AAAAAAAAf0:af:f0:af:f0:af

("f0:af:f0:af:f0:af" is the device bluetooth address, taken from "phys"
field in struct hid_device due to overflow.)

Cc: stable@vger.kernel.org
Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:39:05 -02:00
Simon Wunderlich
e93d083f42 ath9k: add spectral scan feature
Adds the spectral scan feature for ath9k. AR92xx and AR93xx chips
are supported for now. The spectral scan is triggered by configuring
a mode through a debugfs control file. Samples can be gathered via
another relay debugfs file.

Essentially, to try it out:

echo chanscan > /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan_ctl
iw dev wlan0 scan
cat /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan0 > samples
echo disable > /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan_ctl

This feature is still experimental.

The special "chanscan" mode is used to perform spectral scan while
mac80211 is scanning for channels. To allow this,
sw_scan_start/complete() ops have been added.

The patch contains code snippets and information from Zefir Kurtisi and
information provided by Adrian Chadd and Felix Fietkau.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09 14:37:12 -05:00
Sujith Manoharan
1a26cda8e0 ath9k_hw: Fix radio programming for AR9550
For AR9550, program the synth value based on the ref. clock.
The logic for AR9550 is similar to AR9330, but keep the code
separate since changes for AR9330 are required - which would be
done later.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09 14:37:11 -05:00
Sujith Manoharan
2d7caefbaf ath9k_hw: Add TempCompensation feature for AR9550
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09 14:37:11 -05:00
Sujith Manoharan
3a6a62fbc9 ath9k_hw: Update initvals for QCA955x
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09 14:37:11 -05:00
Nishant Sarmukadam
4850b6d355 mwl8k: Wake up queues in mwl8k_start
If queues are stopped in mwl8k_stop,
these should be started in mwl8k_start

Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Yogesh Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09 14:37:11 -05:00
Yogesh Ashok Powar
0dd13a48a9 mwl8k: Delete ampdu streams with state AMPDU_STREAM_NEW in sta remove
When a station deauths, we do not delete the streams with state
AMPDU_STREAM_NEW and these remain created forever. Fix this issue by
removing such streams in the driver

Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09 14:37:11 -05:00
Nishant Sarmukadam
9b0b11fb1e mwl8k: Disable tx_wait completion
Whenever TX ring is drained, priv->tx_wait still points
to a valid completion. Making sure that it points to
NULL before returning from the  mwl8k_tx_wait_empty
check.

Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09 14:37:10 -05:00
Sujith Manoharan
96da6fdd5a ath9k_hw: Use helper routines to simplify ar9003_hw_init_cal()
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09 14:37:10 -05:00
Sujith Manoharan
dfcca60b88 ath9k_hw: Fix MCI init for AGC calibration
When AGC calibration is to be done, a GPM message with the
payload, MCI_GPM_WLAN_CAL_REQ has to be sent. Currently this falls
within the IQ-CAL code block which is incorrect. Fix this by using
a separate variable to decide when IQ-CAL is to be done separately
and call ar9003_mci_init_cal_req correctly.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09 14:37:10 -05:00
Sujith Manoharan
4656b8f680 ath9k_hw: Do not enable IQ-CAL for half/quarter rates
IQ calibration doesn't complete and times out for half/quarter
rates, so skip it correctly.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09 14:37:10 -05:00
Rafał Miłecki
72a525cbb8 ssb: add place for serial flash driver
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09 14:37:09 -05:00
John W. Linville
79afb22d09 Merge branch 'for-john' of git://git.sipsolutions.net/mac80211-next 2013-01-09 14:22:45 -05:00
AceLan Kao
2582d529c4 Bluetooth: Add support for Foxconn / Hon Hai [0489:e056]
Add support for the AR9462 chip

T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e056 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:15 -02:00
AceLan Kao
3a61eda81e Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e]
Add support for the AR9462 chip

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e04e Rev=00.02
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:15 -02:00
Daniel Schaal
2c262b2a52 Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k.
T:  Bus=02 Lev=02 Prnt=02 Port=06 Cnt=01 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3006 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Daniel Schaal <farbing@web.de>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:14 -02:00
AceLan Kao
eed307e290 Bluetooth: Add support for IMC Networks [13d3:3393]
Add support for the AR9462 chip

T:  Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3393 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:14 -02:00
Szymon Janc
dbccd791a3 Bluetooth: Fix sending HCI commands after reset
After sending reset command wait for its command complete event before
sending next command. Some chips sends CC event for command received
before reset if reset was send before chip replied with CC.

This is also required by specification that host shall not send
additional HCI commands before receiving CC for reset.

< HCI Command: Reset (0x03|0x0003) plen 0                              [hci0] 18.404612
> HCI Event: Command Complete (0x0e) plen 4                            [hci0] 18.405850
      Write Extended Inquiry Response (0x03|0x0052) ncmd 1
        Status: Success (0x00)
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0      [hci0] 18.406079
> HCI Event: Command Complete (0x0e) plen 4                            [hci0] 18.407864
      Reset (0x03|0x0003) ncmd 1
        Status: Success (0x00)
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0      [hci0] 18.408062
> HCI Event: Command Complete (0x0e) plen 12                           [hci0] 18.408835

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Cc: stable@vger.kernel.org
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:14 -02:00
Szymon Janc
a6785be2f7 Bluetooth: mgmt: Avoid using magic number in status code
Use MGMT_STATUS_SUCCESS for success return code.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:06 -02:00
Szymon Janc
47c37941b8 Bluetooth: mgmt: Remove not needed restriction on add/remove OOB data
Those commands don't send any HCI commands to controller so there is no
need to restrict them to only powered up controller. This also makes
implementation more consistent as already stored remote OOB data
persist power toggle.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:05 -02:00
Andrei Emeltchenko
cb6801c640 Bluetooth: AMP: Use set_bit / test_bit for amp_mgr state
Using bit operations solves problems with multiple requests
and clearing state.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:05 -02:00
Andrei Emeltchenko
cbf54ad104 Bluetooth: AMP: Remove dead code
Remove code which cannot execute. l2cap_conn_add for AMP_LINK
might only be invoked when receiving data in l2cap_recv_acldata.
But this case is checked in the first statement there.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:05 -02:00
Andrei Emeltchenko
7a9898c6ff Bluetooth: AMP: Clean up logical link create / accept
Use chan->hs_hcon instead of lookup by dst address.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:05 -02:00
Andrei Emeltchenko
8e05e3ba88 Bluetooth: AMP: Send A2MP Create Phylink Rsp after Assoc write
Postpone sending A2MP Create Phylink Response until we got successful
HCI Command Complete after HCI Write Remote AMP Assoc.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:05 -02:00
Rami Rosen
7952861f4a Bluetooth: remove an unused variable in a header file
This patch removes srej_queue_next from include/net/bluetooth/l2cap.h as it
is not used.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:05 -02:00
Rami Rosen
d6b67c6c0c Bluetooth: Remove unnecessary include l2cap.h
This patch removes unnecessary include of <net/bluetooth/l2cap.h>
in bluetooth/bnep/core.c.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:05 -02:00
Vineet Gupta
b6fca72536 sysctl: Enable IA64 "ignore-unaligned-usertrap" to be used cross-arch
IA64 defines /proc/sys/kernel/ignore-unaligned-usertrap to control
verbose warnings on unaligned access emulation.

Although the exact mechanics of what to do with sysctl (ignore/shout)
are arch specific, this change enables the sysctl to be usable cross-arch.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-01-09 10:48:34 -08:00
Bjorn Helgaas
e84813c0cb Merge branch 'pci/yinghai-survey-resources' into next
* pci/yinghai-survey-resources:
  x86/PCI: Implement pcibios_resource_survey_bus()
  PCI/ACPI: Reserve firmware-allocated resources for hot-added root buses
  x86/PCI: Keep resource allocation functions after boot
  x86/PCI: Don't track firmware-assigned BAR values for hot-added devices
  x86/PCI: Factor out pcibios_allocate_dev_rom_resource()
  x86/PCI: Allocate resources on a per-bus basis for hot-adding root buses
  x86/PCI: Factor out pcibios_allocate_dev_resources()
  x86/PCI: Factor out pcibios_allocate_bridge_resources()
2013-01-09 11:37:16 -07:00
Bjorn Helgaas
e84d0dedd3 Merge branch 'pci/misc' into next
* pci/misc:
  PCI: cpqphp: Cleanup and remove unreachable paths
  PCI: Drop "__" prefix on __pci_enable_device_flags()
  PCI: Use "unsigned long" for __pci_enable_device_flags to match ioport.h
  mn10300/PCI: Remove unused pci_root_bus
  frv/PCI: Remove unused pci_root_bus
  x86/PCI: Remove unused pci_root_bus
2013-01-09 11:37:01 -07:00
Dmitry Torokhov
b666263b71 Input: document that unregistering managed devices is not necessary
Apparently some users of managed input devices are confused whether
input_unregister_device() is needed when working with them. Clarify
this in the kernel doc for devm_input_allocate_device(): in most cases
there is no need to call neither input_unregister_device() nor
input_free_device() when working with managed devices.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-09 09:07:56 -08:00
Linus Torvalds
5c49985c21 Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King.

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7616/1: cache-l2x0: aurora: Use writel_relaxed instead of writel
  ARM: 7615/1: cache-l2x0: aurora: Invalidate during clean operation with WT enable
  ARM: 7614/1: mm: fix wrong branch from Cortex-A9 to PJ4b
  ARM: 7612/1: imx: Do not select some errata that depends on !ARCH_MULTIPLATFORM
  ARM: 7611/1: VIC: fix bug in VIC irqdomain code
  ARM: 7610/1: versatile: bump IRQ numbers
  ARM: 7609/1: disable errata work-arounds which access secure registers
  ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlier
2013-01-09 08:58:57 -08:00
Linus Torvalds
57a0c1e2d6 Two error path fixes causing a crash and a Kconfig fix for an issue
which spilled all EDAC suboptions into the 'Device Drivers' menu.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ7D0jAAoJEBLB8Bhh3lVKtcgP/3uzBjETQ7KzKG9R+zHxkBom
 7pl6UYqgquqpoqP3tGsn0+oaVyEvY3D11NMp/vhGxUjqJjDnIE3T/TvBMIwaRaq1
 /bPrZ+hE5d2mHWP/TULEVVYMziHhR9UO1SpB+E7vX7FqKcLwzeiS7CMlm4qjq0qC
 duXCG/6gyEKIecT3KPuXFzpojV6pSpSIYvLu03hdS3e8w7Wb6jvomWV282TpaSim
 aFyL909M/f4kexWD0827VnBxogwBWPl1hIGfFVprYGrabgUTtfb/OFhnZut8U1FV
 giDtDgIC7nATp1LzTK+fPE5kx9yZvrE1SV8ZTNF6r0dYH14fnR3YgbQqbVgbLUYF
 icQqCHpyZKD+s/ajymq8lg+ltVtROqCLWdT6YFZlaBlObP0sYltpSj1JRcoC5O6c
 Lx252LQQmxMQZKGnNlBooI6QN73GXlsngTgHD9z3DpFgvRilhA8EmbK2ZFFesdkk
 R4s25yH8fno6ClhxlwyA3+0vwU9B19Ul00cx4/5ZXPdK56Fq7slM/ORTE5SQFrHH
 6QG/pYDz09WXhKvOtX4ZRh2bBudMsY7mgsrxFelGYtsqHikLtYVUzkkyFkccjZMj
 UWcHUHsdSx+gr4DK/jclW1tDgwzh2G17d3FJobujGSgJJIqM2qOo/izON/g4+ojA
 RlKqYTCkAh3fX6DZX1vX
 =Qh4Y
 -----END PGP SIGNATURE-----

Merge tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC fixes from Borislav Petkov:
 "Two error path fixes causing a crash and a Kconfig fix for an issue
  which spilled all EDAC suboptions into the 'Device Drivers' menu."

* tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Cleanup device deregistering path
  EDAC: Fix EDAC Kconfig menu
  EDAC: Fix kernel panic on module unloading
2013-01-09 08:43:56 -08:00
Linus Torvalds
e53289c0c5 mm: reinstante dropped pmd_trans_splitting() check
The check for a pmd being in the process of being split was dropped by
mistake by commit d10e63f294 ("mm: numa: Create basic numa page
hinting infrastructure"). Put it back.

Reported-by: Dave Jones <davej@redhat.com>
Debugged-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Kirill Shutemov <kirill@shutemov.name>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-09 08:36:54 -08:00
Marc Dionne
08c097fc3b cred: Remove tgcred pointer from struct cred
Commit 3a50597de8 ("KEYS: Make the session and process keyrings
per-thread") removed the definition of the thread_group_cred structure,
but left a now unused pointer in struct cred.

Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-09 08:26:53 -08:00
Tejun Heo
43114018cb cfq-iosched: add hierarchical cfq_group statistics
Unfortunately, at this point, there's no way to make the existing
statistics hierarchical without creating nasty surprises for the
existing users.  Just create recursive counterpart of the existing
stats.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:13 -08:00
Tejun Heo
0b39920b5f cfq-iosched: collect stats from dead cfqgs
To support hierarchical stats, it's necessary to remember stats from
dead children.  Add cfqg->dead_stats and make a dying cfqg transfer
its stats to the parent's dead-stats.

The transfer happens form ->pd_offline_fn() and it is possible that
there are some residual IOs completing afterwards.  Currently, we lose
these stats.  Given that cgroup removal isn't a very high frequency
operation and the amount of residual IOs on offline are likely to be
nil or small, this shouldn't be a big deal and the complexity needed
to handle residual IOs - another callback and rather elaborate
synchronization to reach and lock the matching q - doesn't seem
justified.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:13 -08:00
Tejun Heo
689665af44 cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
Separate out cfqg_stats_reset() which takes struct cfqg_stats * from
cfq_pd_reset_stats() and move the latter to where other pd methods are
defined.  cfqg_stats_reset() will be used to implement hierarchical
stats.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:13 -08:00
Tejun Heo
810ecfa765 blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
Instead of holding blkcg->lock while walking ->blkg_list and executing
prfill(), RCU walk ->blkg_list and hold the blkg's queue lock while
executing prfill().  This makes prfill() implementations easier as
stats are mostly protected by queue lock.

This will be used to implement hierarchical stats.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2013-01-09 08:05:13 -08:00