Put the hardware into a safe state before enabling the interrupt. In
the interrupt routine, check the device has been fully configured by
checking `dev->attached`. In particular, `dev->read_subdev` could be
NULL early on and although the hardware's status register should
indicate no interrupt has occurred (since it's been put into a safe
state), it's better not to rely on it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Turn static some symbols which do not actually need to be
externally-visible
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This prefixes all externally-visible symbols of speakup with "spk_".
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On 24-Nov-12, at 10:05 AM, John David Anglin wrote:
> In trying to build the debian libsigsegv2 package, I found that sigaltstack
> doesn't round ss.ss_sp. The tests intentionally pass an unaligned pointer.
> This results in the two stack overflow tests failing.
The attached patch fixes this issue.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Various GCC tests use gdb to simulate a multithreaded application. Many of
these tests have been failing on parisc linux.
GCC does this by using gdb to single-step the application, then gdb is used to
call other test specific code. Where this fails is when the application is
stepped into the delay slot of a taken branch. This sets the PSW B bit. When
the test specific code is executed, this usually clears the PSW B bit.
Currently, gdb is not allowed to set the B bit. So, the code falls through what
should be a taken branch.
The attached patch adds the PSW B bit to the set of bits that gdb is allowed to
set. In order to set the B bit, the trace system call must return using an
interrupt restore. The patch also modifies this code to use the saved IAOQ
values when they are saved by a ptrace syscall or interruption.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
The CPU irqs (timer and IPI) are not shared and only need to be claimed once.
A mismatch error occurs if they are claimed more than once.
Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The attached change fixes a float conversion problem found running the
GCC testsuite with GCC configured with --with-arch=2.0.
The actual problem occurs for an exponent value of 63. This is the
maximum exponent value that can be passed. This causes a left shift by
32 in the else hunk of the macro. This causes undefined behavior and the
wrong value is returned for dresultB. The fix is the check "exponent <=
62". If the exponent is 63, dresultB is set to 0. The patch also
optimizes the operation a bit by copying "Sall(sgl_value) <<
SGL_EXP_LENGTH" to val, so that sgl_value is not modified.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Use register name defines instead of magic numbers where a bit of
clarity would be useful.
Also a small typo fix and some register prefixes added, for further
clarity.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several magic numbers were used to represent rxdma csr register bitmasks.
Replace them with descriptive defines.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
we should check the return value of calling function fir16_create(): a NULL
value means the memory allocation fails.
this patch also cleans up the error handling in function function oslec_create()
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In uf_send_pkt_to_encrypt(), the memory area zeroed by this call to memset() is
overwritten by a call to memcpy() a few instructions later, so it is not needed.
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
line6_send_sysex_message_async() isn't called from anywhere.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: line6: driver.c
The semantic patch that makes this output is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix those checkpatch issues
drivers/staging/line6/pcm.c:84:
WARNING: simple_strtoul is obsolete, use kstrtoul instead
call to obsolete simple_strtoul() replaced by kstrtoint()
drivers/staging/line6/pcm.c:423:
ERROR: switch and case should be at the same indent
realigns comments
Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass
intercepts for channel I/O instructions to userspace. Only I/O
instructions interacting with I/O interrupts need to be handled
in-kernel:
- TEST PENDING INTERRUPTION (tpi) dequeues and stores pending
interrupts entirely in-kernel.
- TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel
and exits via KVM_EXIT_S390_TSCH to userspace for subchannel-
related processing.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Explicitely catch all channel I/O related instructions intercepts
in the kernel and set condition code 3 for them.
This paves the way for properly handling these instructions later
on.
Note: This is not architecture compliant (the previous code wasn't
either) since setting cc 3 is not the correct thing to do for some
of these instructions. For Linux guests, however, it still has the
intended effect of stopping css probing.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Add support for injecting machine checks (only repressible
conditions for now).
This is a bit more involved than I/O interrupts, for these reasons:
- Machine checks come in both floating and cpu varieties.
- We don't have a bit for machine checks enabling, but have to use
a roundabout approach with trapping PSW changing instructions and
watching for opened machine checks.
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Add support for handling I/O interrupts (standard, subchannel-related
ones and rudimentary adapter interrupts).
The subchannel-identifying parameters are encoded into the interrupt
type.
I/O interrupts are floating, so they can't be injected on a specific
vcpu.
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
These tables are never modified.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Check that array index is in-bounds before accessing the synths[] array.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: stable <stable@vger.kernel.org>
Cc: Nickolai Zeldovich <nickolai@csail.mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check that array index is in-bounds before accessing the synths[] array.
Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu>
Cc: stable <stable@vger.kernel.org>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor pcibios_allocate_dev_resources() out of
pcibios_allocate_resources(). Currently we only allocate these
resources at boot-time with a for_each_pci_dev() loop. Eventually
we'll use pcibios_allocate_dev_resources() for hot-added devices, too.
[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Pull CIFS fixes from Steve French:
"Misc small cifs fixes"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Don't let read only caching for mandatory byte-range locked files
CIFS: Fix write after setting a read lock for read oplock files
Revert "CIFS: Fix write after setting a read lock for read oplock files"
cifs: adjust sequence number downward after signing NT_CANCEL request
cifs: move check for NULL socket into smb_send_rqst
Fixed a coding style issue. Fixed positions
of braces regarding to linux coding style.
Signed-off-by: Kurt Kanzenbach <shifty91@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed a coding style issue. Replaced all
c99 comments by c89 ones and deleted
commented out code.
Signed-off-by: Kurt Kanzenbach <shifty91@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Beginning with kernel 3.8, the DMA mapping routines issue a warning
for the first call to pci_map_single() that is not checked with a
pci_dma_mapping_error() call.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Beginning with kernel 3.8, the DMA mapping routines issue a warning
for the first call to pci_map_single() that is not checked with a
pci_dma_mapping_error() call.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpatch error "do not initialize statics to 0 or NULL"
Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpatch error "switch and case should be at the same indent"
Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a couple of instances where checkpatch complained about
initializing globals with 0.
Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Converted staging/rtl8187se to use tabs instead of spaces for
indentation to fix the checkpatch error "code indent should use tabs
where possible".
Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the checkpatch error "open brace '{' following struct go on the
same line" in staging/rtl8192u
Signed-off-by: Jennifer Naumann <Jennifer.Naumann@informatik.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Run cleanfile on all files inside drivers/staging/rtl819u
Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
Signed-off-by: Jennifer Naumann <Jennifer.Naumann@informatik.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following errors fixed.
- ERROR: "foo * bar" should be "foo *bar"
- ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following errors and warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
- ERROR: that open brace { should be on the previous line
- ERROR: space required before the open parenthesis '('
- ERROR: space prohibited after that open parenthesis '('
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following errors fixed.
- ERROR: spaces required around that '=' (ctx:VxV)
- ERROR: spaces required around that '<=' (ctx:VxV)
- ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following warnings fixed.
-WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
-WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ...
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following errors fixed.
-ERROR: spaces required around that '<' (ctx:VxV)
-ERROR: spaces required around that '?' (ctx:VxV)
-ERROR: spaces required around that ':' (ctx:VxV)
-ERROR: spaces required around that '>' (ctx:VxV)
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following errors fixed.
-ERROR: that open brace { should be on the previous line
-ERROR: space required before the open parenthesis '('
-ERROR: else should follow close brace '}'
-ERROR: space required before the open brace '{'
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following errors and warnings fixed.
- ERROR: code indent should use tabs where possible
- WARNING: please, no spaces at the start of a line
- WARNING: please, no space before tabs
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If mkdir() of VHCI_STATE_PATH fails because the directory
already exists, that's not an error. This patch fixes
annoying "record connection" errors that would typically
come up on attach.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Acked-by: David Chang <dchang@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This comes handy when hacking with different cross
compilers, some of which may or may not have
_FORTIFY_SOURCE turned on by default. This patch
allows us to turn _FORTIFY_SOURCE on by specifying
--with-fortify option at configuration time (or
to turn it off by specifying --without-fortify).
If nothing is specified, default compiler behavior
is assumed.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USBIP daemon relies on functions available in glib2 library
to spawn handler code for incoming connection. This makes the
whole program dependent on glib2 library, which is a GNOME library
that on systems that don't have GNOME results in pulling more
dependency, only to be able to run a relatively trivial
socket-based program.
While this may not seem to be a problem on full-blown desktops
that already have the necessary libraries, it is a big issue
on small embedded systems (think USB hub with an Ethernet port)
that only have bare essentials in their file systems.
This patch eliminates glib2 dependency by reworking the
code to use lower level system calls to dispatch connection
handler. Instead of using glib2-style event loop and dispatching
mechanism, just do a ppoll(2) system call in our own loop and call
accept(2) followed by fork(2) on the socket that has incoming
connection. Stevens' books taught us that more than twenty
years ago. No need for anything smarter in a simple server, such
as usbipd.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a bunch of automatically generated files that git
should not care about.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>