commit e09299225d upstream.
The following BPF program, simplified from a syzkaller repro, causes a
kernel warning:
r0 = *(u8 *)(r1 + 169);
exit;
With pointer field sk being at offset 168 in __sk_buff. This access is
detected as a narrower read in bpf_skb_is_valid_access because it
doesn't match offsetof(struct __sk_buff, sk). It is therefore allowed
and later proceeds to bpf_convert_ctx_access. Note that for the
"is_narrower_load" case in the convert_ctx_accesses(), the insn->off
is aligned, so the cnt may not be 0 because it matches the
offsetof(struct __sk_buff, sk) in the bpf_convert_ctx_access. However,
the target_size stays 0 and the verifier errors with a kernel warning:
verifier bug: error during ctx access conversion(1)
This patch fixes that to return a proper "invalid bpf_context access
off=X size=Y" error on the load instruction.
The same issue affects multiple other fields in context structures that
allow narrow access. Some other non-affected fields (for sk_msg,
sk_lookup, and sockopt) were also changed to use bpf_ctx_range_ptr for
consistency.
Note this syzkaller crash was reported in the "Closes" link below, which
used to be about a different bug, fixed in
commit fce7bd8e38 ("bpf/verifier: Handle BPF_LOAD_ACQ instructions
in insn_def_regno()"). Because syzbot somehow confused the two bugs,
the new crash and repro didn't get reported to the mailing list.
Fixes: f96da09473 ("bpf: simplify narrower ctx access")
Fixes: 0df1a55afa ("bpf: Warn on internal verifier errors")
Reported-by: syzbot+0ef84a7bdf5301d4cbec@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0ef84a7bdf5301d4cbec
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/3b8dcee67ff4296903351a974ddd9c4dca768b64.1753194596.git.paul.chaignon@gmail.com
[shung-hsi.yu: offset(struct bpf_sock_ops, skb_hwtstamp) case was
dropped becasuse it was only added in v6.2 with commit 9bb053490f
("bpf: Add hwtstamp field for the sockops prog")]
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04a899573f upstream.
Yinhao et al. reported that their fuzzer tool was able to trigger a
skb_warn_bad_offload() from netif_skb_features() -> gso_features_check().
When a BPF program - triggered via BPF test infra - pushes the packet
to the loopback device via bpf_clone_redirect() then mentioned offload
warning can be seen. GSO-related features are then rightfully disabled.
We get into this situation due to convert___skb_to_skb() setting
gso_segs and gso_size but not gso_type. Technically, it makes sense
that this warning triggers since the GSO properties are malformed due
to the gso_type. Potentially, the gso_type could be marked non-trustworthy
through setting it at least to SKB_GSO_DODGY without any other specific
assumptions, but that also feels wrong given we should not go further
into the GSO engine in the first place.
The checks were added in 121d57af30 ("gso: validate gso_type in GSO
handlers") because there were malicious (syzbot) senders that combine
a protocol with a non-matching gso_type. If we would want to drop such
packets, gso_features_check() currently only returns feature flags via
netif_skb_features(), so one location for potentially dropping such skbs
could be validate_xmit_unreadable_skb(), but then otoh it would be
an additional check in the fast-path for a very corner case. Given
bpf_clone_redirect() is the only place where BPF test infra could emit
such packets, lets reject them right there.
Fixes: 850a88cc40 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN")
Fixes: cf62089b0e ("bpf: Add gso_size to __sk_buff")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251020075441.127980-1-daniel@iogearbox.net
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eb74c19fe1 ]
Add missing entries in netdev_lock_type[] and netdev_lock_name[] :
CAN, MCTP, RAWIP, CAIF, IP6GRE, 6LOWPAN, NETLINK, VSOCKMON,
IEEE802154_MONITOR.
Also add a WARN_ONCE() in netdev_lock_pos() to help future bug hunting
next time a protocol is added without updating these arrays.
Fixes: 1a33e10e4a ("net: partially revert dynamic lockdep key changes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260108093244.830280-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 271683bb2c ]
syzbot reported a uaf in page_pool_recycle_in_ring:
BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862
Read of size 8 at addr ffff8880286045a0 by task syz.0.284/6943
CPU: 0 UID: 0 PID: 6943 Comm: syz.0.284 Not tainted 6.13.0-rc3-syzkaller-gdfa94ce54f41 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:165 [inline]
_raw_spin_unlock_bh+0x1b/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
ptr_ring_produce_bh include/linux/ptr_ring.h:164 [inline]
page_pool_recycle_in_ring net/core/page_pool.c:707 [inline]
page_pool_put_unrefed_netmem+0x748/0xb00 net/core/page_pool.c:826
page_pool_put_netmem include/net/page_pool/helpers.h:323 [inline]
page_pool_put_full_netmem include/net/page_pool/helpers.h:353 [inline]
napi_pp_put_page+0x149/0x2b0 net/core/skbuff.c:1036
skb_pp_recycle net/core/skbuff.c:1047 [inline]
skb_free_head net/core/skbuff.c:1094 [inline]
skb_release_data+0x6c4/0x8a0 net/core/skbuff.c:1125
skb_release_all net/core/skbuff.c:1190 [inline]
__kfree_skb net/core/skbuff.c:1204 [inline]
sk_skb_reason_drop+0x1c9/0x380 net/core/skbuff.c:1242
kfree_skb_reason include/linux/skbuff.h:1263 [inline]
__skb_queue_purge_reason include/linux/skbuff.h:3343 [inline]
root cause is:
page_pool_recycle_in_ring
ptr_ring_produce
spin_lock(&r->producer_lock);
WRITE_ONCE(r->queue[r->producer++], ptr)
//recycle last page to pool
page_pool_release
page_pool_scrub
page_pool_empty_ring
ptr_ring_consume
page_pool_return_page //release all page
__page_pool_destroy
free_percpu(pool->recycle_stats);
free(pool) //free
spin_unlock(&r->producer_lock); //pool->ring uaf read
recycle_stat_inc(pool, ring);
page_pool can be free while page pool recycle the last page in ring.
Add producer-lock barrier to page_pool_release to prevent the page
pool from being free before all pages have been recycled.
recycle_stat_inc() is empty when CONFIG_PAGE_POOL_STATS is not
enabled, which will trigger Wempty-body build warning. Add definition
for pool stat macro to fix warning.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20250513083123.3514193-1-dongchenchen2@huawei.com
Fixes: ff7d6b27f8 ("page_pool: refurbish version of page_pool code")
Reported-by: syzbot+204a4382fcb3311f3858@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=204a4382fcb3311f3858
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250527114152.3119109-1-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Linux 5.15.y does not support page pool statistics
(CONFIG_PAGE_POOL_STATS), so remove the related source code
changes from the patch. ]
Signed-off-by: Ruohan Lan <ruohanlan@aliyun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed3ba9b6e2 upstream.
SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to
br_ioctl_call(), which causes unnecessary RTNL dance and the splat
below [0] under RTNL pressure.
Let's say Thread A is trying to detach a device from a bridge and
Thread B is trying to remove the bridge.
In dev_ioctl(), Thread A bumps the bridge device's refcnt by
netdev_hold() and releases RTNL because the following br_ioctl_call()
also re-acquires RTNL.
In the race window, Thread B could acquire RTNL and try to remove
the bridge device. Then, rtnl_unlock() by Thread B will release RTNL
and wait for netdev_put() by Thread A.
Thread A, however, must hold RTNL after the unlock in dev_ifsioc(),
which may take long under RTNL pressure, resulting in the splat by
Thread B.
Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR)
---------------------- ----------------------
sock_ioctl sock_ioctl
`- sock_do_ioctl `- br_ioctl_call
`- dev_ioctl `- br_ioctl_stub
|- rtnl_lock |
|- dev_ifsioc '
' |- dev = __dev_get_by_name(...)
|- netdev_hold(dev, ...) .
/ |- rtnl_unlock ------. |
| |- br_ioctl_call `---> |- rtnl_lock
Race | | `- br_ioctl_stub |- br_del_bridge
Window | | | |- dev = __dev_get_by_name(...)
| | | May take long | `- br_dev_delete(dev, ...)
| | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...)
| | | | `- rtnl_unlock
\ | |- rtnl_lock <-' `- netdev_run_todo
| |- ... `- netdev_run_todo
| `- rtnl_unlock |- __rtnl_unlock
| |- netdev_wait_allrefs_any
|- netdev_put(dev, ...) <----------------'
Wait refcnt decrement
and log splat below
To avoid blocking SIOCBRDELBR unnecessarily, let's not call
dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF.
In the dev_ioctl() path, we do the following:
1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl()
2. Check CAP_NET_ADMIN in dev_ioctl()
3. Call dev_load() in dev_ioctl()
4. Fetch the master dev from ifr.ifr_name in dev_ifsioc()
3. can be done by request_module() in br_ioctl_call(), so we move
1., 2., and 4. to br_ioctl_stub().
Note that 2. is also checked later in add_del_if(), but it's better
performed before RTNL.
SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since
the pre-git era, and there seems to be no specific reason to process
them there.
[0]:
unregister_netdevice: waiting for wpan3 to become free. Usage count = 2
ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at
__netdev_tracker_alloc include/linux/netdevice.h:4282 [inline]
netdev_hold include/linux/netdevice.h:4311 [inline]
dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624
dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826
sock_do_ioctl+0x1ca/0x260 net/socket.c:1213
sock_ioctl+0x23a/0x6c0 net/socket.c:1318
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 893b195875 ("net: bridge: fix ioctl locking")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: yan kang <kangyan91@outlook.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/netdev/SY8P300MB0421225D54EB92762AE8F0F2A1D32@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250316192851.19781-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[cascardo: fixed conflict at dev_ifsioc]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 49c8d2c1f9 ]
commit efa95b01da ("netpoll: fix use after free") incorrectly
ignored the refcount and prematurely set dev->npinfo to NULL during
netpoll cleanup, leading to improper behavior and memory leaks.
Scenario causing lack of proper cleanup:
1) A netpoll is associated with a NIC (e.g., eth0) and netdev->npinfo is
allocated, and refcnt = 1
- Keep in mind that npinfo is shared among all netpoll instances. In
this case, there is just one.
2) Another netpoll is also associated with the same NIC and
npinfo->refcnt += 1.
- Now dev->npinfo->refcnt = 2;
- There is just one npinfo associated to the netdev.
3) When the first netpolls goes to clean up:
- The first cleanup succeeds and clears np->dev->npinfo, ignoring
refcnt.
- It basically calls `RCU_INIT_POINTER(np->dev->npinfo, NULL);`
- Set dev->npinfo = NULL, without proper cleanup
- No ->ndo_netpoll_cleanup() is either called
4) Now the second target tries to clean up
- The second cleanup fails because np->dev->npinfo is already NULL.
* In this case, ops->ndo_netpoll_cleanup() was never called, and
the skb pool is not cleaned as well (for the second netpoll
instance)
- This leaks npinfo and skbpool skbs, which is clearly reported by
kmemleak.
Revert commit efa95b01da ("netpoll: fix use after free") and adds
clarifying comments emphasizing that npinfo cleanup should only happen
once the refcount reaches zero, ensuring stable and correct netpoll
behavior.
Cc: <stable@vger.kernel.org> # 3.17.x
Cc: Jay Vosburgh <jv@jvosburgh.net>
Fixes: efa95b01da ("netpoll: fix use after free")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-1-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a1b501a8c6 ]
page_pool_init() returns E2BIG when the page_pool size goes above 32K
pages. As some drivers are configuring the page_pool size according to
the MTU and ring size, there are cases where this limit is exceeded and
the queue creation fails.
The page_pool size doesn't have to cover a full queue, especially for
larger ring size. So clamp the size instead of returning an error. Do
this in the core to avoid having each driver do the clamping.
The current limit was deemed to high [1] so it was reduced to 16K to avoid
page waste.
[1] https://lore.kernel.org/all/1758532715-820422-3-git-send-email-tariqt@nvidia.com/
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250926131605.2276734-2-dtatulea@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3b52167a0 ]
Driver authors often forget to add GFP_NOWARN for page allocation
from the datapath. This is annoying to users as OOMs are a fact
of life, and we pretty much expect network Rx to hit page allocation
failures during OOM. Make page pool add GFP_NOWARN for ATOMIC allocations
by default.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250912161703.361272-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d85c565a7 ]
Initially, trace_sock_exceed_buf_limit() was invoked when
__sk_mem_raise_allocated() failed due to the memcg limit or the
global limit.
However, commit d6f19938eb ("net: expose sk wmem in
sock_exceed_buf_limit tracepoint") somehow suppressed the event
only when memcg failed to charge for SK_MEM_RECV, although the
memcg failure for SK_MEM_SEND still triggers the event.
Let's restore the event for SK_MEM_RECV.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5b22f62724 upstream.
When bulk delete command is received in the rtnetlink_rcv_msg function,
if bulk delete is not supported, module_put is not called to release
the reference counting. As a result, module reference count is leaked.
Fixes: a6cec0bcd3 ("net: rtnetlink: add bulk delete support flag")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220815024629.240367-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bf29555f5b ]
Creating FDB entries is possible from a non-initial user namespace when
having CAP_NET_ADMIN, yet, when deleting FDB entries, processes receive
an EPERM because the capability is always checked against the initial
user namespace. This restricts the FDB management from unprivileged
containers.
Drop the netlink_capable check in rtnl_fdb_del as it was originally
dropped in c5c351088a and reintroduced in 1690be63a2 without
intention.
This patch was tested using a container on GyroidOS, where it was
possible to delete FDB entries from an unprivileged user namespace and
private network namespace.
Fixes: 1690be63a2 ("bridge: Add vlan support to static neighbors")
Reviewed-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Tested-by: Harshal Gohel <hg@simonwunderlich.de>
Signed-off-by: Johannes Wiesböck <johannes.wiesboeck@aisec.fraunhofer.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20251015201548.319871-1-johannes.wiesboeck@aisec.fraunhofer.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e83425993 ]
When NLM_F_BULK is specified in a fdb del message we need to handle it
differently. First since this is a new call we can strictly validate the
passed attributes, at first only ifindex and vlan are allowed as these
will be the initially supported filter attributes, any other attribute
is rejected. The mac address is no longer mandatory, but we use it
to error out in older kernels because it cannot be specified with bulk
request (the attribute is not allowed) and then we have to dispatch
the call to ndo_fdb_del_bulk if the device supports it. The del bulk
callback can do further validation of the attributes if necessary.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: bf29555f5b ("rtnetlink: Allow deleting FDB entries in user namespace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6cec0bcd3 ]
Add a new rtnl flag (RTNL_FLAG_BULK_DEL_SUPPORTED) which is used to
verify that the delete operation allows bulk object deletion. Also emit
a warning if anyone tries to set it for non-delete kind.
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: bf29555f5b ("rtnetlink: Allow deleting FDB entries in user namespace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e9ea3e30f ]
Add a helper which extracts the msg type's kind using the kind mask (0x3).
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: bf29555f5b ("rtnetlink: Allow deleting FDB entries in user namespace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23f3770e1a ]
Cilium has a BPF egress gateway feature which forces outgoing K8s Pod
traffic to pass through dedicated egress gateways which then SNAT the
traffic in order to interact with stable IPs outside the cluster.
The traffic is directed to the gateway via vxlan tunnel in collect md
mode. A recent BPF change utilized the bpf_redirect_neigh() helper to
forward packets after the arrival and decap on vxlan, which turned out
over time that the kmalloc-256 slab usage in kernel was ever-increasing.
The issue was that vxlan allocates the metadata_dst object and attaches
it through a fake dst entry to the skb. The latter was never released
though given bpf_redirect_neigh() was merely setting the new dst entry
via skb_dst_set() without dropping an existing one first.
Fixes: b4ab314149 ("bpf: Add redirect_neigh helper as redirect drop-in")
Reported-by: Yusuke Suzuki <yusuke.suzuki@isovalent.com>
Reported-by: Julian Wiedmann <jwi@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jordan Rife <jrife@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jordan Rife <jrife@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20251003073418.291171-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fabca2fc9 ]
Syzkaller found a kernel warning on the following sock_addr program:
0: r0 = 0
1: r2 = *(u32 *)(r1 +60)
2: exit
which triggers:
verifier bug: error during ctx access conversion (0)
This is happening because offset 60 in bpf_sock_addr corresponds to an
implicit padding of 4 bytes, right after msg_src_ip4. Access to this
padding isn't rejected in sock_addr_is_valid_access and it thus later
fails to convert the access.
This patch fixes it by explicitly checking the various fields of
bpf_sock_addr in sock_addr_is_valid_access.
I checked the other ctx structures and is_valid_access functions and
didn't find any other similar cases. Other cases of (properly handled)
padding are covered in new tests in a subsequent patch.
Fixes: 1cedee13d2 ("bpf: Hooks for sys_sendmsg")
Reported-by: syzbot+136ca59d411f92e821b7@syzkaller.appspotmail.com
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=136ca59d411f92e821b7
Link: https://lore.kernel.org/bpf/b58609d9490649e76e584b0361da0abd3c2c1779.1758094761.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f72de02ebe ]
PHY drivers such as micrel or dp83640 need to analyze whether a given
skb is a PTP sync message for one step functionality.
In order to avoid code duplication introduce a generic function and
move it to ptp classify.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 9b2bfdbf43 ("phy: mscc: Stop taking ts_lock for tx_queue and use its own lock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2da4def0f4 ]
Paolo spotted hangs in NIPA running driver tests against virtio.
The tests hang in virtnet_close() -> virtnet_napi_tx_disable().
The problem is only reproducible if running multiple of our tests
in sequence (I used TEST_PROGS="xdp.py ping.py netcons_basic.sh \
netpoll_basic.py stats.py"). Initial suspicion was that this is
a simple case of double-disable of NAPI, but instrumenting the
code reveals:
Deadlocked on NAPI ffff888007cd82c0 (virtnet_poll_tx):
state: 0x37, disabled: false, owner: 0, listed: false, weight: 64
The NAPI was not in fact disabled, owner is 0 (rather than -1),
so the NAPI "thinks" it's scheduled for CPU 0 but it's not listed
(!list_empty(&n->poll_list) => false). It seems odd that normal NAPI
processing would wedge itself like this.
Better suspicion is that netpoll gets enabled while NAPI is polling,
and also grabs the NAPI instance. This confuses napi_complete_done():
[netpoll] [normal NAPI]
napi_poll()
have = netpoll_poll_lock()
rcu_access_pointer(dev->npinfo)
return NULL # no netpoll
__napi_poll()
->poll(->weight)
poll_napi()
cmpxchg(->poll_owner, -1, cpu)
poll_one_napi()
set_bit(NAPI_STATE_NPSVC, ->state)
napi_complete_done()
if (NAPIF_STATE_NPSVC)
return false
# exit without clearing SCHED
This feels very unlikely, but perhaps virtio has some interactions
with the hypervisor in the NAPI ->poll that makes the race window
larger?
Best I could to to prove the theory was to add and trigger this
warning in napi_poll (just before netpoll_poll_unlock()):
WARN_ONCE(!have && rcu_access_pointer(n->dev->npinfo) &&
napi_is_scheduled(n) && list_empty(&n->poll_list),
"NAPI race with netpoll %px", n);
If this warning hits the next virtio_close() will hang.
This patch survived 30 test iterations without a hang (without it
the longest clean run was around 10). Credit for triggering this
goes to Breno's recent netconsole tests.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/c5a93ed1-9abe-4880-a3bb-8d1678018b1d@redhat.com
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20250726010846.1105875-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ead3d7b2b6 ]
flow_dissector_is_valid_access doesn't check that the context access is
aligned. As a consequence, an unaligned access within one of the exposed
field is considered valid and later rejected by
flow_dissector_convert_ctx_access when we try to convert it.
The later rejection is problematic because it's reported as a verifier
bug with a kernel warning and doesn't point to the right instruction in
verifier logs.
Fixes: d58e468b11 ("flow_dissector: implements flow dissector BPF hook")
Reported-by: syzbot+ccac90e482b2a81d74aa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ccac90e482b2a81d74aa
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/cc1b036be484c99be45eddf48bd78cc6f72839b1.1754039605.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76be5fae32 ]
We observed an issue from the latest selftest: sockmap_redir where
sk_psock(psock->sk) != psock in the backlog. The root cause is the special
behavior in sockmap_redir - it frequently performs map_update() and
map_delete() on the same socket. During map_update(), we create a new
psock and during map_delete(), we eventually free the psock via rcu_work
in sk_psock_drop(). However, pending workqueues might still exist and not
be processed yet. If users immediately perform another map_update(), a new
psock will be allocated for the same sk, resulting in two psocks pointing
to the same sk.
When the pending workqueue is later triggered, it uses the old psock to
access sk for I/O operations, which is incorrect.
Timing Diagram:
cpu0 cpu1
map_update(sk):
sk->psock = psock1
psock1->sk = sk
map_delete(sk):
rcu_work_free(psock1)
map_update(sk):
sk->psock = psock2
psock2->sk = sk
workqueue:
wakeup with psock1, but the sk of psock1
doesn't belong to psock1
rcu_handler:
clean psock1
free(psock1)
Previously, we used reference counting to address the concurrency issue
between backlog and sock_map_close(). This logic remains necessary as it
prevents the sk from being freed while processing the backlog. But this
patch prevents pending backlogs from using a psock after it has been
stopped.
Note: We cannot call cancel_delayed_work_sync() in map_delete() since this
might be invoked in BPF context by BPF helper, and the function may sleep.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20250609025908.79331-1-jiayuan.chen@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a454d84ee2 upstream.
There is a race where skb's from the sk_psock_backlog can be referenced
after userspace side has already skb_consumed() the sk_buff and its refcnt
dropped to zer0 causing use after free.
The flow is the following:
while ((skb = skb_peek(&psock->ingress_skb))
sk_psock_handle_Skb(psock, skb, ..., ingress)
if (!ingress) ...
sk_psock_skb_ingress
sk_psock_skb_ingress_enqueue(skb)
msg->skb = skb
sk_psock_queue_msg(psock, msg)
skb_dequeue(&psock->ingress_skb)
The sk_psock_queue_msg() puts the msg on the ingress_msg queue. This is
what the application reads when recvmsg() is called. An application can
read this anytime after the msg is placed on the queue. The recvmsg hook
will also read msg->skb and then after user space reads the msg will call
consume_skb(skb) on it effectively free'ing it.
But, the race is in above where backlog queue still has a reference to
the skb and calls skb_dequeue(). If the skb_dequeue happens after the
user reads and free's the skb we have a use after free.
The !ingress case does not suffer from this problem because it uses
sendmsg_*(sk, msg) which does not pass the sk_buff further down the
stack.
The following splat was observed with 'test_progs -t sockmap_listen':
[ 1022.710250][ T2556] general protection fault, ...
[...]
[ 1022.712830][ T2556] Workqueue: events sk_psock_backlog
[ 1022.713262][ T2556] RIP: 0010:skb_dequeue+0x4c/0x80
[ 1022.713653][ T2556] Code: ...
[...]
[ 1022.720699][ T2556] Call Trace:
[ 1022.720984][ T2556] <TASK>
[ 1022.721254][ T2556] ? die_addr+0x32/0x80^M
[ 1022.721589][ T2556] ? exc_general_protection+0x25a/0x4b0
[ 1022.722026][ T2556] ? asm_exc_general_protection+0x22/0x30
[ 1022.722489][ T2556] ? skb_dequeue+0x4c/0x80
[ 1022.722854][ T2556] sk_psock_backlog+0x27a/0x300
[ 1022.723243][ T2556] process_one_work+0x2a7/0x5b0
[ 1022.723633][ T2556] worker_thread+0x4f/0x3a0
[ 1022.723998][ T2556] ? __pfx_worker_thread+0x10/0x10
[ 1022.724386][ T2556] kthread+0xfd/0x130
[ 1022.724709][ T2556] ? __pfx_kthread+0x10/0x10
[ 1022.725066][ T2556] ret_from_fork+0x2d/0x50
[ 1022.725409][ T2556] ? __pfx_kthread+0x10/0x10
[ 1022.725799][ T2556] ret_from_fork_asm+0x1b/0x30
[ 1022.726201][ T2556] </TASK>
To fix we add an skb_get() before passing the skb to be enqueued in the
engress queue. This bumps the skb->users refcnt so that consume_skb()
and kfree_skb will not immediately free the sk_buff. With this we can
be sure the skb is still around when we do the dequeue. Then we just
need to decrement the refcnt or free the skb in the backlog case which
we do by calling kfree_skb() on the ingress case as well as the sendmsg
case.
Before locking change from fixes tag we had the sock locked so we
couldn't race with user and there was no issue here.
Fixes: 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Xu Kuohai <xukuohai@huawei.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230901202137.214666-1-john.fastabend@gmail.com
Signed-off-by: Pranav Tyagi <pranav.tyagi03@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8d89661a36 ]
The length in the pseudo header should be the length of the L3 payload
AKA the L4 header+payload. The selftest code builds the packet from
the lower layers up, so all the headers are pushed already when it
constructs L4. We need to subtract the lower layer headers from skb->len.
Fixes: 3e1e58d64c ("net: add generic selftest support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250624183258.3377740-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ead7f9b8de upstream.
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
2: __wsum diff, bool pseudohdr)
3: {
4: if (skb->ip_summed != CHECKSUM_PARTIAL) {
5: csum_replace_by_diff(sum, diff);
6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
7: skb->csum = ~csum_sub(diff, skb->csum);
8: } else if (pseudohdr) {
9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
10: }
11: }
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Note: Fixed conflict due to unrelated comment change. ]
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6043b794c7 upstream.
During ILA address translations, the L4 checksums can be handled in
different ways. One of them, adj-transport, consist in parsing the
transport layer and updating any found checksum. This logic relies on
inet_proto_csum_replace_by_diff and produces an incorrect skb->csum when
in state CHECKSUM_COMPLETE.
This bug can be reproduced with a simple ILA to SIR mapping, assuming
packets are received with CHECKSUM_COMPLETE:
$ ip a show dev eth0
14: eth0@if15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 62:ae:35:9e:0f:8d brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 3333:0:0:1::c078/64 scope global
valid_lft forever preferred_lft forever
inet6 fd00:10:244:1::c078/128 scope global nodad
valid_lft forever preferred_lft forever
inet6 fe80::60ae:35ff:fe9e:f8d/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
$ ip ila add loc_match fd00:10:244:1 loc 3333:0:0:1 \
csum-mode adj-transport ident-type luid dev eth0
Then I hit [fd00:10:244:1::c078]:8000 with a server listening only on
[3333:0:0:1::c078]:8000. With the bug, the SYN packet is dropped with
SKB_DROP_REASON_TCP_CSUM after inet_proto_csum_replace_by_diff changed
skb->csum. The translation and drop are visible on pwru [1] traces:
IFACE TUPLE FUNC
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ipv6_rcv
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ip6_rcv_core
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) nf_hook_slow
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) inet_proto_csum_replace_by_diff
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_early_demux
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_route_input
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input_finish
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_protocol_deliver_rcu
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) raw6_local_deliver
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ipv6_raw_deliver
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_rcv
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) __skb_checksum_complete
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skb_reason(SKB_DROP_REASON_TCP_CSUM)
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_head_state
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_data
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_free_head
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skbmem
This is happening because inet_proto_csum_replace_by_diff is updating
skb->csum when it shouldn't. The L4 checksum is updated such that it
"cancels" the IPv6 address change in terms of checksum computation, so
the impact on skb->csum is null.
Note this would be different for an IPv4 packet since three fields
would be updated: the IPv4 address, the IP checksum, and the L4
checksum. Two would cancel each other and skb->csum would still need
to be updated to take the L4 checksum change into account.
This patch fixes it by passing an ipv6 flag to
inet_proto_csum_replace_by_diff, to skip the skb->csum update if we're
in the IPv6 case. Note the behavior of the only other user of
inet_proto_csum_replace_by_diff, the BPF subsystem, is left as is in
this patch and fixed in the subsequent patch.
With the fix, using the reproduction from above, I can confirm
skb->csum is not touched by inet_proto_csum_replace_by_diff and the TCP
SYN proceeds to the application after the ILA translation.
Link: https://github.com/cilium/pwru [1]
Fixes: 65d7ab8de5 ("net: Identifier Locator Addressing module")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/b5539869e3550d46068504feb02d37653d939c0b.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Fixed conflict due to unrelated change in inet_proto_csum_replace_by_diff. ]
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8259eb0e06 ]
The sk->sk_socket is not locked or referenced in backlog thread, and
during the call to skb_send_sock(), there is a race condition with
the release of sk_socket. All types of sockets(tcp/udp/unix/vsock)
will be affected.
Race conditions:
'''
CPU0 CPU1
backlog::skb_send_sock
sendmsg_unlocked
sock_sendmsg
sock_sendmsg_nosec
close(fd):
...
ops->release() -> sock_map_close()
sk_socket->ops = NULL
free(socket)
sock->ops->sendmsg
^
panic here
'''
The ref of psock become 0 after sock_map_close() executed.
'''
void sock_map_close()
{
...
if (likely(psock)) {
...
// !! here we remove psock and the ref of psock become 0
sock_map_remove_links(sk, psock)
psock = sk_psock_get(sk);
if (unlikely(!psock))
goto no_psock; <=== Control jumps here via goto
...
cancel_delayed_work_sync(&psock->work); <=== not executed
sk_psock_put(sk, psock);
...
}
'''
Based on the fact that we already wait for the workqueue to finish in
sock_map_close() if psock is held, we simply increase the psock
reference count to avoid race conditions.
With this patch, if the backlog thread is running, sock_map_close() will
wait for the backlog thread to complete and cancel all pending work.
If no backlog running, any pending work that hasn't started by then will
fail when invoked by sk_psock_get(), as the psock reference count have
been zeroed, and sk_psock_drop() will cancel all jobs via
cancel_delayed_work_sync().
In summary, we require synchronization to coordinate the backlog thread
and close() thread.
The panic I catched:
'''
Workqueue: events sk_psock_backlog
RIP: 0010:sock_sendmsg+0x21d/0x440
RAX: 0000000000000000 RBX: ffffc9000521fad8 RCX: 0000000000000001
...
Call Trace:
<TASK>
? die_addr+0x40/0xa0
? exc_general_protection+0x14c/0x230
? asm_exc_general_protection+0x26/0x30
? sock_sendmsg+0x21d/0x440
? sock_sendmsg+0x3e0/0x440
? __pfx_sock_sendmsg+0x10/0x10
__skb_send_sock+0x543/0xb70
sk_psock_backlog+0x247/0xb80
...
'''
Fixes: 4b4647add7 ("sock_map: avoid race between sock_map_close and sk_psock_put")
Reported-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250516141713.291150-1-jiayuan.chen@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b4f14b794 ]
In the !ingress path under sk_psock_handle_skb(), when sending data to the
remote under snd_buf limitations, partial skb data might be transmitted.
Although we preserved the partial transmission state (offset/length), the
state wasn't properly consumed during retries. This caused the retry path
to resend the entire skb data instead of continuing from the previous
offset, resulting in data overlap at the receiver side.
Fixes: 405df89dd5 ("bpf, sockmap: Improved check for empty queue")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20250407142234.47591-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 425e64440a ]
Honour the user given buffer size for the strn_len() calls (otherwise
strn_len() will access memory outside of the user given buffer).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250219084527.20488-8-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b15a0693f ]
Fix mpls maximum labels list parsing up to MAX_MPLS_LABELS entries (instead
of up to MAX_MPLS_LABELS - 1).
Addresses the following:
$ echo "mpls 00000f00,00000f01,00000f02,00000f03,00000f04,00000f05,00000f06,00000f07,00000f08,00000f09,00000f0a,00000f0b,00000f0c,00000f0d,00000f0e,00000f0f" > /proc/net/pktgen/lo\@0
-bash: echo: write error: Argument list too long
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9e8d1013b0 upstream.
Zero-initialize TCP header via memset() to avoid garbage values that
may affect checksum or behavior during test transmission.
Also zero-fill allocated payload and padding regions using memset()
after skb_put(), ensuring deterministic content for all outgoing
test packets.
Fixes: 3e1e58d64c ("net: add generic selftest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416160125.2914724-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 066b86787f upstream.
assume the following setup on a single machine:
1. An openvswitch instance with one bridge and default flows
2. two network namespaces "server" and "client"
3. two ovs interfaces "server" and "client" on the bridge
4. for each ovs interface a veth pair with a matching name and 32 rx and
tx queues
5. move the ends of the veth pairs to the respective network namespaces
6. assign ip addresses to each of the veth ends in the namespaces (needs
to be the same subnet)
7. start some http server on the server network namespace
8. test if a client in the client namespace can reach the http server
when following the actions below the host has a chance of getting a cpu
stuck in a infinite loop:
1. send a large amount of parallel requests to the http server (around
3000 curls should work)
2. in parallel delete the network namespace (do not delete interfaces or
stop the server, just kill the namespace)
there is a low chance that this will cause the below kernel cpu stuck
message. If this does not happen just retry.
Below there is also the output of bpftrace for the functions mentioned
in the output.
The series of events happening here is:
1. the network namespace is deleted calling
`unregister_netdevice_many_notify` somewhere in the process
2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and
then runs `synchronize_net`
3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER`
4. this is then handled by `dp_device_event` which calls
`ovs_netdev_detach_dev` (if a vport is found, which is the case for
the veth interface attached to ovs)
5. this removes the rx_handlers of the device but does not prevent
packages to be sent to the device
6. `dp_device_event` then queues the vport deletion to work in
background as a ovs_lock is needed that we do not hold in the
unregistration path
7. `unregister_netdevice_many_notify` continues to call
`netdev_unregister_kobject` which sets `real_num_tx_queues` to 0
8. port deletion continues (but details are not relevant for this issue)
9. at some future point the background task deletes the vport
If after 7. but before 9. a packet is send to the ovs vport (which is
not deleted at this point in time) which forwards it to the
`dev_queue_xmit` flow even though the device is unregistering.
In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is
a while loop (if the packet has a rx_queue recorded) that is infinite if
`dev->real_num_tx_queues` is zero.
To prevent this from happening we update `do_output` to handle devices
without carrier the same as if the device is not found (which would
be the code path after 9. is done).
Additionally we now produce a warning in `skb_tx_hash` if we will hit
the infinite loop.
bpftrace (first word is function name):
__dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2
ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2
netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 27, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 22, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 18, reg_state: 2
netdev_unregister_kobject: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
ovs_vport_send server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
__dev_queue_xmit server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
broken device server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024
ovs_dp_detach_port server: real_num_tx_queues: 0 cpu 9, pid: 9124, tid: 9124, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 33604, tid: 33604
stuck message:
watchdog: BUG: soft lockup - CPU#5 stuck for 26s! [curl:1929279]
Modules linked in: veth pktgen bridge stp llc ip_set_hash_net nft_counter xt_set nft_compat nf_tables ip_set_hash_ip ip_set nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 tls binfmt_misc nls_iso8859_1 input_leds joydev serio_raw dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua sch_fq_codel drm efi_pstore virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel virtio_net ahci net_failover crypto_simd cryptd psmouse libahci virtio_blk failover
CPU: 5 PID: 1929279 Comm: curl Not tainted 5.15.0-67-generic #74-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:netdev_pick_tx+0xf1/0x320
Code: 00 00 8d 48 ff 0f b7 c1 66 39 ca 0f 86 e9 01 00 00 45 0f b7 ff 41 39 c7 0f 87 5b 01 00 00 44 29 f8 41 39 c7 0f 87 4f 01 00 00 <eb> f2 0f 1f 44 00 00 49 8b 94 24 28 04 00 00 48 85 d2 0f 84 53 01
RSP: 0018:ffffb78b40298820 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff9c8773adc2e0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: ffff9c8773adc2e0 RDI: ffff9c870a25e000
RBP: ffffb78b40298858 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9c870a25e000
R13: ffff9c870a25e000 R14: ffff9c87fe043480 R15: 0000000000000000
FS: 00007f7b80008f00(0000) GS:ffff9c8e5f740000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7b80f6a0b0 CR3: 0000000329d66000 CR4: 0000000000350ee0
Call Trace:
<IRQ>
netdev_core_pick_tx+0xa4/0xb0
__dev_queue_xmit+0xf8/0x510
? __bpf_prog_exit+0x1e/0x30
dev_queue_xmit+0x10/0x20
ovs_vport_send+0xad/0x170 [openvswitch]
do_output+0x59/0x180 [openvswitch]
do_execute_actions+0xa80/0xaa0 [openvswitch]
? kfree+0x1/0x250
? kfree+0x1/0x250
? kprobe_perf_func+0x4f/0x2b0
? flow_lookup.constprop.0+0x5c/0x110 [openvswitch]
ovs_execute_actions+0x4c/0x120 [openvswitch]
ovs_dp_process_packet+0xa1/0x200 [openvswitch]
? ovs_ct_update_key.isra.0+0xa8/0x120 [openvswitch]
? ovs_ct_fill_key+0x1d/0x30 [openvswitch]
? ovs_flow_key_extract+0x2db/0x350 [openvswitch]
ovs_vport_receive+0x77/0xd0 [openvswitch]
? __htab_map_lookup_elem+0x4e/0x60
? bpf_prog_680e8aff8547aec1_kfree+0x3b/0x714
? trace_call_bpf+0xc8/0x150
? kfree+0x1/0x250
? kfree+0x1/0x250
? kprobe_perf_func+0x4f/0x2b0
? kprobe_perf_func+0x4f/0x2b0
? __mod_memcg_lruvec_state+0x63/0xe0
netdev_port_receive+0xc4/0x180 [openvswitch]
? netdev_port_receive+0x180/0x180 [openvswitch]
netdev_frame_hook+0x1f/0x40 [openvswitch]
__netif_receive_skb_core.constprop.0+0x23d/0xf00
__netif_receive_skb_one_core+0x3f/0xa0
__netif_receive_skb+0x15/0x60
process_backlog+0x9e/0x170
__napi_poll+0x33/0x180
net_rx_action+0x126/0x280
? ttwu_do_activate+0x72/0xf0
__do_softirq+0xd9/0x2e7
? rcu_report_exp_cpu_mult+0x1b0/0x1b0
do_softirq+0x7d/0xb0
</IRQ>
<TASK>
__local_bh_enable_ip+0x54/0x60
ip_finish_output2+0x191/0x460
__ip_finish_output+0xb7/0x180
ip_finish_output+0x2e/0xc0
ip_output+0x78/0x100
? __ip_finish_output+0x180/0x180
ip_local_out+0x5e/0x70
__ip_queue_xmit+0x184/0x440
? tcp_syn_options+0x1f9/0x300
ip_queue_xmit+0x15/0x20
__tcp_transmit_skb+0x910/0x9c0
? __mod_memcg_state+0x44/0xa0
tcp_connect+0x437/0x4e0
? ktime_get_with_offset+0x60/0xf0
tcp_v4_connect+0x436/0x530
__inet_stream_connect+0xd4/0x3a0
? kprobe_perf_func+0x4f/0x2b0
? aa_sk_perm+0x43/0x1c0
inet_stream_connect+0x3b/0x60
__sys_connect_file+0x63/0x70
__sys_connect+0xa6/0xd0
? setfl+0x108/0x170
? do_fcntl+0xe8/0x5a0
__x64_sys_connect+0x18/0x20
do_syscall_64+0x5c/0xc0
? __x64_sys_fcntl+0xa9/0xd0
? exit_to_user_mode_prepare+0x37/0xb0
? syscall_exit_to_user_mode+0x27/0x50
? do_syscall_64+0x69/0xc0
? __sys_setsockopt+0xea/0x1e0
? exit_to_user_mode_prepare+0x37/0xb0
? syscall_exit_to_user_mode+0x27/0x50
? __x64_sys_setsockopt+0x1f/0x30
? do_syscall_64+0x69/0xc0
? irqentry_exit+0x1d/0x30
? exc_page_fault+0x89/0x170
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7f7b8101c6a7
Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34 24 89
RSP: 002b:00007ffffd6b2198 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b8101c6a7
RDX: 0000000000000010 RSI: 00007ffffd6b2360 RDI: 0000000000000005
RBP: 0000561f1370d560 R08: 00002795ad21d1ac R09: 0030312e302e302e
R10: 00007ffffd73f080 R11: 0000000000000246 R12: 0000561f1370c410
R13: 0000000000000000 R14: 0000000000000005 R15: 0000000000000000
</TASK>
Fixes: 7f8a436eaa ("openvswitch: Add conntrack action")
Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZC0pBXBAgh7c76CA@kernel-bug-kernel-bug
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Carlos Soto <carlos.soto@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d477eb9004 upstream.
MPTCP hard codes it, let us instead provide this helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
[ cherry-pick from amazon-linux amazon-5.15.y/mainline ]
Link: 7154d8eaac
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9ab5cf19fb ]
Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow
in sk_dst_gso_max_size(), which may trigger a BUG_ON crash,
because sk->sk_gso_max_size would be much bigger than device limits.
Call Trace:
tcp_write_xmit
tso_segs = tcp_init_tso_segs(skb, mss_now);
tcp_set_skb_tso_segs
tcp_skb_pcount_set
// skb->len = 524288, mss_now = 8
// u16 tso_segs = 524288/8 = 65535 -> 0
tso_segs = DIV_ROUND_UP(skb->len, mss_now)
BUG_ON(!tso_segs)
Add check for the minimum value of gso_max_size and gso_ipv4_max_size.
Fixes: 46e6b992c2 ("rtnetlink: allow GSO maximums to be set on device creation")
Fixes: 9eefedd58a ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241023035213.517386-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Resolve minor conflicts to fix CVE-2024-50258 ]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[Harshit: Clean cherrypick from 6.1.y commit]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d4bac0288a ]
Classic BPF socket filters with SKB_NET_OFF and SKB_LL_OFF fail to
read when these offsets extend into frags.
This has been observed with iwlwifi and reproduced with tun with
IFF_NAPI_FRAGS. The below straightforward socket filter on UDP port,
applied to a RAW socket, will silently miss matching packets.
const int offset_proto = offsetof(struct ip6_hdr, ip6_nxt);
const int offset_dport = sizeof(struct ip6_hdr) + offsetof(struct udphdr, dest);
struct sock_filter filter_code[] = {
BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_AD_OFF + SKF_AD_PKTTYPE),
BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, PACKET_HOST, 0, 4),
BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_NET_OFF + offset_proto),
BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 2),
BPF_STMT(BPF_LD + BPF_H + BPF_ABS, SKF_NET_OFF + offset_dport),
This is unexpected behavior. Socket filter programs should be
consistent regardless of environment. Silent misses are
particularly concerning as hard to detect.
Use skb_copy_bits for offsets outside linear, same as done for
non-SKF_(LL|NET) offsets.
Offset is always positive after subtracting the reference threshold
SKB_(LL|NET)_OFF, so is always >= skb_(mac|network)_offset. The sum of
the two is an offset against skb->data, and may be negative, but it
cannot point before skb->head, as skb_(mac|network)_offset would too.
This appears to go back to when frag support was introduced to
sk_run_filter in linux-2.4.4, before the introduction of git.
The amount of code change and 8/16/32 bit duplication are unfortunate.
But any attempt I made to be smarter saved very few LoC while
complicating the code.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/20250122200402.3461154-1-maze@google.com/
Link: https://elixir.bootlin.com/linux/2.4.4/source/net/core/filter.c#L244
Reported-by: Matt Moeller <moeller.matt@gmail.com>
Co-developed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250408132833.195491-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96a233e600 ]
A couple of the syscalls which load values (bpf_skb_load_helper_16() and
bpf_skb_load_helper_32()) are using u16/u32 types which are triggering
warnings as they are then converted from big-endian to CPU-endian. Fix
these by making the types __be instead.
Fixes the following sparse warnings:
net/core/filter.c:246:32: warning: cast to restricted __be16
net/core/filter.c:246:32: warning: cast to restricted __be16
net/core/filter.c:246:32: warning: cast to restricted __be16
net/core/filter.c:246:32: warning: cast to restricted __be16
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220714105101.297304-1-ben.dooks@sifive.com
Stable-dep-of: d4bac0288a ("bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43130d02ba ]
We noticed the kworker in page_pool_release_retry() was waken
up repeatedly and infinitely in production because of the
buggy driver causing the inflight less than 0 and warning
us in page_pool_inflight()[1].
Since the inflight value goes negative, it means we should
not expect the whole page_pool to get back to work normally.
This patch mitigates the adverse effect by not rescheduling
the kworker when detecting the inflight negative in
page_pool_release_retry().
[1]
[Mon Feb 10 20:36:11 2025] ------------[ cut here ]------------
[Mon Feb 10 20:36:11 2025] Negative(-51446) inflight packet-pages
...
[Mon Feb 10 20:36:11 2025] Call Trace:
[Mon Feb 10 20:36:11 2025] page_pool_release_retry+0x23/0x70
[Mon Feb 10 20:36:11 2025] process_one_work+0x1b1/0x370
[Mon Feb 10 20:36:11 2025] worker_thread+0x37/0x3a0
[Mon Feb 10 20:36:11 2025] kthread+0x11a/0x140
[Mon Feb 10 20:36:11 2025] ? process_one_work+0x370/0x370
[Mon Feb 10 20:36:11 2025] ? __kthread_cancel_work+0x40/0x40
[Mon Feb 10 20:36:11 2025] ret_from_fork+0x35/0x40
[Mon Feb 10 20:36:11 2025] ---[ end trace ebffe800f33e7e34 ]---
Note: before this patch, the above calltrace would flood the
dmesg due to repeated reschedule of release_dw kworker.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250214064250.85987-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90a7138619 ]
Previous commit 8b5c171bb3 ("neigh: new unresolved queue limits")
introduces new netlink attribute NDTPA_QUEUE_LENBYTES to represent
approximative value for deprecated QUEUE_LEN. However, it forgot to add
the associated nla_policy in nl_ntbl_parm_policy array. Fix it with one
simple NLA_U32 type policy.
Fixes: 8b5c171bb3 ("neigh: new unresolved queue limits")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://patch.msgid.link/20250315165113.37600-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 505ead7ab7 ]
The function __netpoll_send_skb() is being invoked without holding the
RCU read lock. This oversight triggers a warning message when
CONFIG_PROVE_RCU_LIST is enabled:
net/core/netpoll.c:330 suspicious rcu_dereference_check() usage!
netpoll_send_skb
netpoll_send_udp
write_ext_msg
console_flush_all
console_unlock
vprintk_emit
To prevent npinfo from disappearing unexpectedly, ensure that
__netpoll_send_skb() is protected with the RCU read lock.
Fixes: 2899656b49 ("netpoll: take rcu_read_lock_bh() in netpoll_send_skb_on_dev()")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306-netpoll_rcu_v2-v2-1-bc4f5c51742a@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de2c211868 ]
We found an issue when using bpf_redirect with ipvs NAT mode after
commit ff70202b2d ("dev_forward_skb: do not scrub skb mark within
the same name space"). Particularly, we use bpf_redirect to return
the skb directly back to the netif it comes from, i.e., xnet is
false in skb_scrub_packet(), and then ipvs_property is preserved
and SNAT is skipped in the rx path.
ipvs_property has been already cleared when netns is changed in
commit 2b5ec1a5f9 ("netfilter/ipvs: clear ipvs_property flag when
SKB net namespace changed"). This patch just clears it in spite of
netns.
Fixes: 2b5ec1a5f9 ("netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Link: https://patch.msgid.link/20250222033518.126087-1-lulie@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b5a28b38c ]
Add dedicated helper for finding devices by hardware address when
holding rtnl_lock, similar to existing dev_getbyhwaddr_rcu(). This prevents
PROVE_LOCKING warnings when rtnl_lock is held but RCU read lock is not.
Extract common address comparison logic into dev_addr_cmp().
The context about this change could be found in the following
discussion:
Link: https://lore.kernel.org/all/20250206-scarlet-ermine-of-improvement-1fcac5@leitao/
Cc: kuniyu@amazon.com
Cc: ushankar@purestorage.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-1-d3d6892db9e1@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4eae0ee0f1 ("arp: switch to dev_getbyhwaddr() in arp_req_set_public()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69ab34f705 ]
Fix how port range keys are handled in __skb_flow_bpf_to_target() by:
- Separating PORTS and PORTS_RANGE key handling
- Using correct key_ports_range structure for range keys
- Properly initializing both key types independently
This ensures port range information is correctly stored in its dedicated
structure rather than incorrectly using the regular ports key structure.
Fixes: 59fb9b62fb ("flow_dissector: Fix to use new variables for port ranges in bpf hook")
Reported-by: Qiang Zhang <dtzq01@gmail.com>
Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/
Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250218043210.732959-4-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Chaignon
Daniel Borkmann
Eric Dumazet
Weiming Shi
Dong Chenchen
Thadeu Lima de Souza Cascardo
Breno Leitao
Dragos Tatulea
Jakub Kicinski
Kuniyuki Iwashima
Zhengchao Shao
Johannes Wiesböck
Nikolay Aleksandrov
Kuniyuki Iwashima
Kurt Kanzenbach
Jiayuan Chen
John Fastabend
Zijun Hu
Peter Seiderer
Oleksij Rempel
Felix Huettner
Wang Liang
Willem de Bruijn
Ben Dooks
Jason Xing
Mark Zhang
Michal Luczaj
Lin Ma
Philo Lu
Gavrilov Ilia
Cong Wang