The cortina/gemini SL3516 SoC has a crypto IP name either (crypto
engine/crypto acceleration engine in the datasheet).
It support many algorithms like [AES|DES|3DES][ECB|CBC], SHA1, MD5 and
some HMAC.
This patch adds the core files and support for ecb(aes) and the RNG.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds documentation for Device-Tree bindings for the
SL3516-ce cryptographic offloader driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes: 604c31039d ("crypto: omap-sham - Check for return value from pm_runtime_get_sync")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Function nitrox_register_interrupts leaves variable 'nr_vecs' unchecked, which
would be use as kcalloc parameter later.
Fixes: 5155e118dd ("crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It turns out that the compilers generate conditional branches to the
retpoline thunks like:
5d5: 0f 85 00 00 00 00 jne 5db <cpuidle_reflect+0x22>
5d7: R_X86_64_PLT32 __x86_indirect_thunk_r11-0x4
while the rewrite can only handle JMP/CALL to the thunks. The result
is the alternative wrecking the code. Make sure to skip writing the
alternatives for conditional branches.
Fixes: 9bc0bb5072 ("objtool/x86: Rewrite retpoline thunk calls")
Reported-by: Lukasz Majczak <lma@semihalf.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tegra186 requires the same SID override programming as Tegra194 in order
to seamlessly transition from the firmware framebuffer to the Linux
framebuffer, so the Tegra implementation needs to be used on Tegra186
devices as well.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-7-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The secure firmware keeps some SID override registers set as passthrough
in order to allow devices such as the display controller to operate with
no knowledge of SMMU translations until an operating system driver takes
over. This is needed in order to seamlessly transition from the firmware
framebuffer to the OS framebuffer.
Upon successfully attaching a device to the SMMU and in the process
creating identity mappings for memory regions that are being accessed,
the Tegra implementation will call into the memory controller driver to
program the override SIDs appropriately.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-6-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Parse the reg property in device tree and detect the number of instances
represented by a device tree node. This is subsequently needed in order
to support single-instance SMMUs with the Tegra implementation because
additional programming is needed to properly configure the SID override
registers in the memory controller.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-5-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The ARM SMMU instantiations found on Tegra186 and later need inter-
operation with the memory controller in order to correctly program
stream ID overrides.
Furthermore, on Tegra194 multiple instances of the SMMU can gang up
to achieve higher throughput. In order to do this, they have to be
programmed identically so that the memory controller can interleave
memory accesses between them.
Add the Tegra186 compatible string to make sure the interoperation
with the memory controller can be enabled on that SoC generation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-3-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Pull ARM SMMU driver change from Will Deacon to resolve dependencies
between memory controllers, Tegra ARM SoC and ARM SMMU drivers trees.
Further ARM SMMU changes for Tegra depend on the change in Will's tree
and on Tegra memory controllers drivers work done before by Thierry
Reding. Pulling Will's tree allows to apply the rest of this ARM SMMU
Tegra work via memory controllers drivers tree.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
With [1] USB4 target-module node got defined in dra74x.dtsi file.
However, the earlier definition in [2] was not removed, and this
duplication of the target module is causing boot failure on dra74
variant boards - dra7-evm, dra76-evm.
USB4 is only present in DRA74x variants, so keeping the entry in
dra74x.dtsi and removing it from the top level interconnect hierarchy
dra7-l4.dtsi file. This change makes the USB4 target module no longer
visible to AM5718, DRA71x and DRA72x so removing references to it in
their respective dts files.
[1]: commit c7b72abca6 ("ARM: OMAP2+: Drop legacy platform data for
dra7 dwc3")
[2]: commit 549fce068a ("ARM: dts: dra7: Add l4 interconnect
hierarchy and ti-sysc data")
Fixes: c7b72abca6 ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3")
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
- These patches make Exynos DRM driver to use pm_runtime_resume_and_get()
function instead of m_runtime_get_sync() to deal with usage counter.
pm_runtime_get_sync() increases the usage counter even when it failed,
which could make callers to forget to decrease the usage counter.
pm_runtime_resume_and_get() decreases the usage counter regardless of
whether it failed or not.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEENRKOoF7NhdPGpscnVzg0iQxDErgFAmDC0DUACgkQVzg0iQxD
ErhdPg//RaCof86IJjCYlUoL9Dj2uRDhpraGhwgU0qtEQrDFo3tza+EmTF728b0p
rkG9IVu8mSRnI65E7sSjDSV3EzUIBMFVYiyIxmyjbnDiobmBL+sLzGUSpWRwNAJY
MdARA2XMECeELBaVR4dcTxVZxwjQx/jW1n5ofdKYjeFxQL1Jq0Ix79UT+H3SFp5c
5fRcBYJ/vLAReRoJLhwMM7x1T1cUOrHwC3oUbkeW67T58po5mXExyADRU4C0vZbf
MZS7ocRxuRXc6QteugeG4VL4jx3j7nsrkplL1LS2/DFouR5X2U4HuTYbHdFZX8Cg
Q1dLsmy/r9l85qPSxyzhKnK4bSb/xHS8+SnSCqnMe1BIHDKL3u/3LHlrwFVM8Al9
DVShrgiCmT1xb9+oEC3klUbyza28uWVRDxQaEf8zffBD7mTp+B0k7A921vukHJFQ
hIxdcaqdZpUGxX99/mOnuqLWBHjPeYz+8vAs1IhMxSSGV9R6baL8Cn5vXEkQcza1
J1fbtZV/wU6bIae4vzwJWHEhcT9dUc3oQY4BxoATX/eEI9UPMCekzCtpRvog38RS
EIO8bnItw+scVAmPF7vy9xHZsLdSUh/16dv9Z6hh0ylPREKimtd5mz3nx6vXqSiD
s9TArbtqsFeRfXC3h3evaRJmVyUU3/G8R70MIVno4p162VtlkwI=
=tY/d
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Two cleanups
- These patches make Exynos DRM driver to use pm_runtime_resume_and_get()
function instead of m_runtime_get_sync() to deal with usage counter.
pm_runtime_get_sync() increases the usage counter even when it failed,
which could make callers to forget to decrease the usage counter.
pm_runtime_resume_and_get() decreases the usage counter regardless of
whether it failed or not.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611025939.393282-1-inki.dae@samsung.com
UAPI Changes:
- Disable mmap ioctl for gen12+ (excl. TGL-LP)
- Start enabling HuC loading by default for upcoming Gen12+
platforms (excludes TGL and RKL)
Core Changes:
- Backmerge of drm-next
Driver Changes:
- Revert "i915: use io_mapping_map_user" (Eero, Matt A)
- Initialize the TTM device and memory managers (Thomas)
- Major rework to the GuC submission backend to prepare
for enabling on new platforms (Michal Wa., Daniele,
Matt B, Rodrigo)
- Fix i915_sg_page_sizes to record dma segments rather
than physical pages (Thomas)
- Locking rework to prep for TTM conversion (Thomas)
- Replace IS_GEN and friends with GRAPHICS_VER (Lucas)
- Use DEVICE_ATTR_RO macro (Yue)
- Static code checker fixes (Zhihao)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YMHeDxg9VLiFtyn3@jlahtine-mobl.ger.corp.intel.com
alternative-macros.h defines ALT_NEW_CONTENT in its assembly part
and ALT_NEW_CONSTENT in the C part. Most likely it is the latter
that is wrong.
Fixes: 6f4eea9046
(riscv: Introduce alternative mechanism to apply errata solution)
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add the DT nodes for the network-on-chip interconnect buses found
on sc7280-based platforms.
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Link: https://lore.kernel.org/r/1619517059-12109-4-git-send-email-okukatla@codeaurora.org
[bjorn: Sorted nodes and dropped include]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
- remove redundant NULL checks by various people
- fix sparse checker warnings from Marc
- expose more GPU ID values to userspace from Christian
- add HWDB entry for GPU found on i.MX8MP from Sascha
- rework of the linear window calculation to better deal with
systems with large regions of reserved RAM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/f27e1ec2c2fea310bfb6fe6c99174a54e9dfba83.camel@pengutronix.de
When PAGE_SIZE is greater than 4kB, multiple stripes may share the same
page. Thus, src_offs is added to async_xor_offs() with array of offsets.
However, async_xor() passes NULL src_offs to async_xor_offs(). In such
case, src_offs should not be updated. Add a check before the update.
Fixes: ceaf2966ab08(async_xor: increase src_offs when dropping destination page)
Cc: stable@vger.kernel.org # v5.10+
Reported-by: Oleksandr Shchirskyi <oleksandr.shchirskyi@linux.intel.com>
Tested-by: Oleksandr Shchirskyi <oleksandr.shchirskyi@intel.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()
to deal with usage counter. pm_runtime_get_sync() increases the
usage counter even when it failed, which makes callers to forget
to decrease the usage counter and resulted in reference leak.
pm_runtime_resume_and_get() function decreases the usage counter
when it failed internally so it can avoid the reference leak.
Changelog v1:
- Fix an build error reported by kernel test robot of Intel.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reported-by: kernel test robot <lkp@intel.com>
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle to avoid continuing to increase the refcount
when pm_runtime_get_sync fails.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
amd-drm-fixes-5.13-2021-06-09:
amdgpu:
- Use kvzmalloc in amdgu_bo_create
- Use drm_dbg_kms for reporting failure to get a GEM FB
- Fix some register offsets for Sienna Cichlid
- Fix fall-through warning
radeon:
- memcpy_to/from_io fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610035631.3943-1-alexander.deucher@amd.com
ttm and drm_auth, one off-by-x1000 fix for mcde and a fix for vc4 to
prevent an out-of-bounds access.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYMJI5gAKCRDj7w1vZxhR
xcsYAP4wuNYRR+xk96UWrR/pdgxjwUVas6LW3DMlS+VL5sKhyAD+P0Jhapz/O2jy
xv5rdKBy91roau+8ZIln6Z1CFsOC3AI=
=/iun
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-06-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One fix for snu4i that prevents it from probing, two locking fixes for
ttm and drm_auth, one off-by-x1000 fix for mcde and a fix for vc4 to
prevent an out-of-bounds access.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610171653.lqsoadxrhdk73cdy@gilmour
Run the following command to find and remove the trailing spaces and tabs:
sed -r -i 's/[ \t]+$//' <audit_files>
The files to be checked are as follows:
kernel/audit*
include/linux/audit.h
include/uapi/linux/audit.h
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently enabling this triggers a warning
| usercopy: Kernel memory overwrite attempt detected to kernel text (offset 155633, size 11)!
| usercopy: BUG: failure at mm/usercopy.c:99/usercopy_abort()!
|
|gcc generated __builtin_trap
|Path: /bin/busybox
|CPU: 0 PID: 84 Comm: init Not tainted 5.4.22
|
|[ECR ]: 0x00090005 => gcc generated __builtin_trap
|[EFA ]: 0x9024fcaa
|[BLINK ]: usercopy_abort+0x8a/0x8c
|[ERET ]: memfd_fcntl+0x0/0x470
|[STAT32]: 0x80080802 : IE K
|...
|...
|Stack Trace:
| memfd_fcntl+0x0/0x470
| usercopy_abort+0x8a/0x8c
| __check_object_size+0x10e/0x138
| copy_strings+0x1f4/0x38c
| __do_execve_file+0x352/0x848
| EV_Trap+0xcc/0xd0
The issue is triggered by an allocation in "init reclaimed" region.
ARC _stext emcompasses the init region (for historical reasons we wanted
the init.text to be under .text as well). This however trips up
__check_object_size()->check_kernel_text_object() which treats this as
object bleeding into kernel text.
Fix that by rezoning _stext to start from regular kernel .text and leave
out .init altogether.
Fixes: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/15
Reported-by: Evgeniy Didin <didin@synopsys.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
ARCv2 has some configuration dependent registers (r30, r58, r59) which
could be targetted by the compiler. To keep the ABI stable, these were
unconditionally part of the glibc ABI
(sysdeps/unix/sysv/linux/arc/sys/ucontext.h:mcontext_t) however we
missed populating them (by saving/restoring them across signal
handling).
This patch fixes the issue by
- adding arcv2 ABI regs to kernel struct sigcontext
- populating them during signal handling
Change to struct sigcontext might seem like a glibc ABI change (although
it primarily uses ucontext_t:mcontext_t) but the fact is
- it has only been extended (existing fields are not touched)
- the old sigcontext was ABI incomplete to begin with anyways
Fixes: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/53
Cc: <stable@vger.kernel.org>
Tested-by: kernel test robot <lkp@intel.com>
Reported-by: Vladimir Isaev <isaev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Mat Martineau says:
====================
mptcp: More v5.13 fixes
Here's another batch of MPTCP fixes for v5.13.
Patch 1 cleans up memory accounting between the MPTCP-level socket and
the subflows to more reliably transfer forward allocated memory under
pressure.
Patch 2 wakes up socket readers more reliably.
Patch 3 changes a WARN_ONCE to a pr_debug.
Patch 4 changes the selftests to only use syncookies in test cases where
they do not cause spurious failures.
Patch 5 modifies socket error reporting to avoid a possible soft lockup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Syncookie validation may fail for OoO packets, causing spurious
resets and self-tests failures, so let's force syncookie only
for tests iteration with no OoO.
Fixes: fed61c4b58 ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/198
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
warn_bad_map() produces a kernel WARN on bad input coming
from the network. Use pr_debug() to avoid spamming the system
log.
Additionally, when the right bound check fails, warn_bad_map() reports
the wrong ssn value, let's fix it.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/107
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we rely on the subflow->data_avail field, which is subject to
races:
ssk1
skb len = 500 DSS(seq=1, len=1000, off=0)
# data_avail == MPTCP_SUBFLOW_DATA_AVAIL
ssk2
skb len = 500 DSS(seq = 501, len=1000)
# data_avail == MPTCP_SUBFLOW_DATA_AVAIL
ssk1
skb len = 500 DSS(seq = 1, len=1000, off =500)
# still data_avail == MPTCP_SUBFLOW_DATA_AVAIL,
# as the skb is covered by a pre-existing map,
# which was in-sequence at reception time.
Instead we can explicitly check if some has been received in-sequence,
propagating the info from __mptcp_move_skbs_from_subflow().
Additionally add the 'ONCE' annotation to the 'data_avail' memory
access, as msk will read it outside the subflow socket lock.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the host is under sever memory pressure, and RX forward
memory allocation for the msk fails, we try to borrow the
required memory from the ingress subflow.
The current attempt is a bit flaky: if skb->truesize is less
than SK_MEM_QUANTUM, the ssk will not release any memory, and
the next schedule will fail again.
Instead, directly move the required amount of pages from the
ssk to the msk, if available
Fixes: 9c3f94e168 ("mptcp: add missing memory scheduling in the rx path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some features which need code patching such as KPROBES, DYNAMIC_FTRACE
KGDB can only work on !XIP_KERNEL. Add dependencies for these features
that rely on code patching.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
RISCV_ERRATA_ALTERNATIVE patches text at runtime which is currently
not possible when the kernel is executed from the flash in XIP mode.
Since runtime patching concerns only traps at the moment, let's just
have all the traps reside in RAM anyway if RISCV_ERRATA_ALTERNATIVE
is set. Thus, these functions will be patch-able even when the .text
section is in flash.
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
In order to use upstream_bridge_distance_warn() from a dma_map function, it
must not sleep. However, pci_get_slot() takes the pci_bus_sem so it might
sleep.
In order to avoid this, try to get the host bridge's device from the first
element in the device list. It should be impossible for the host bridge's
device to go away while references are held on child devices, so the first
element should not be able to change and, thus, this should be safe.
Introduce a static function called pci_host_bridge_dev() to obtain the host
bridge's root device.
Link: https://lore.kernel.org/r/20210610160609.28447-7-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
All callers of pci_p2pdma_map_type() have a struct dev_pgmap and a struct
device (of the client doing the DMA transfer). Thus move the conversion to
struct pci_devs for the provider and client into this function.
Link: https://lore.kernel.org/r/20210610160609.28447-6-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
If the host bridge is not in the whitelist print a warning in the
calc_map_type_and_dist_warn() path detailing the vendor and device IDs that
would need to be added to the whitelist.
Suggested-by: Don Dutile <ddutile@redhat.com>
Link: https://lore.kernel.org/r/20210610160609.28447-5-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Instead of using an int for the return value of this function, use the
correct enum pci_p2pdma_map_type.
Link: https://lore.kernel.org/r/20210610160609.28447-4-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In order to call the calc_map_type_and_dist_warn() function from a dma_map
operation, the function must not sleep. The only reason it sleeps is to
allocate memory for the seq_buf to print a verbose warning telling the user
how to disable ACS for that path.
Instead of allocating the memory with kmalloc(), allocate a smaller buffer
on the stack. A 128 byte buffer is enough to print 10 PCI device names. A
system with 10 bridge ports between two devices that have ACS enabled would
be unusually large, so this should still be a reasonable limit.
This also cleans up the awkward (and broken) return with -ENOMEM which
contradicts the return type and the caller was not prepared for.
Link: https://lore.kernel.org/r/20210610160609.28447-3-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The function upstream_bridge_distance() has evolved such that its name is
no longer entirely reflective of what the function does. It not only
calculates the distance between two peers but also calculates how the DMA
addresses for those two peers should be mapped.
Rename it to calc_map_type_and_dist() and rework the documentation to
better describe the two pieces of information the function returns.
[bhelgaas: tweak comment wording]
Link: https://lore.kernel.org/r/20210610160609.28447-2-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add IORING_FEAT_RSRC_TAGS indicating that io_uring supports a bunch of
new IORING_REGISTER operations, in particular
IORING_REGISTER_[FILES[,UPDATE]2,BUFFERS[2,UPDATE]] that support rsrc
tagging, and also indicating implemented dynamic fixed buffer updates.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b995d4045b6c6b4ab7510ca124fd25ac2203af7.1623339162.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are ABI moments about recently added rsrc registration/update and
tagging that might become a nuisance in the future. First,
IORING_REGISTER_RSRC[_UPD] hide different types of resources under it,
so breaks fine control over them by restrictions. It works for now, but
once those are wanted under restrictions it would require a rework.
It was also inconvenient trying to fit a new resource not supporting
all the features (e.g. dynamic update) into the interface, so better
to return to IORING_REGISTER_* top level dispatching.
Second, register/update were considered to accept a type of resource,
however that's not a good idea because there might be several ways of
registration of a single resource type, e.g. we may want to add
non-contig buffers or anything more exquisite as dma mapped memory.
So, remove IORING_RSRC_[FILE,BUFFER] out of the ABI, and place them
internally for now to limit changes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b554897a7c17ad6e3becc48dfed2f7af9f423d5.1623339162.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows m68k q40 systems to switch from the deprecated IDE subsystem
to libata.
Enhance the byte-swapping falconide and pata_falcon platform drivers to
accept an irq resource, for use on q40. Atari ST-DMA IRQ arrangements seem
to co-exist with q40 IRQ arrangements without too much mess.
The new IO resources were added solely for the purpose of making
request_region() reservations identical to those made by q40ide: these
regions aren't used for actual IO.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Richard Zidlicky <rz@linux-m68k.org>
Reviewed-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/eefb7e9c2291e09fb4e065ce06bc105f05bb9e06.1623287706.git.fthain@linux-m68k.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows m68k mac systems to switch from the deprecated IDE subsystem
to libata.
This was tested on my Quadra 630. I haven't tested it on my PowerBook 150
because I don't have a RAM adapter board for it. It appears that the
hardware I tested doesn't need macide_clear_irq() or macide_test_irq().
If it did, the generic driver would not have worked. It's possible that
those routines are needed for the PowerBook 150 but we can cross that
bridge if and when we come to it.
BTW, macide_clear_irq() appears to suffer from a race condition. The write
to the interrupt flags register could have unintended side effects as it
may alter other flag bits. Fortunately, all of the other bits are unused
by Linux. When tested on my Quadra 630, the assignment *ide_ifr &= ~0x20
was observed to have no effect on bit 5, so it may be redundant anyway.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Joshua Thompson <funaho@jurai.org>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/11a56b3317df3bb2ddc15fd29b40b6820e9c7444.1623287706.git.fthain@linux-m68k.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Alex Elder says:
====================
net: ipa: memory region rework, part 2
This is the second portion of a set of patches updating the IPA
memory region code.
In this portion (part 2), the focus is on adjusting the code so that
it no longer assumes the memory region descriptor array is indexed
by the region identifier. This brings with it some related cleanup.
Three loops are changed so their loop index variable is an unsigned
rather than an enumerated type.
A set of functions is changed so a region identifier (rather than a
memory region descriptor pointer) is passed as argument, to simplify
their call sites. This isn't entirely related or required, but I
think it improves the code.
A validation function for filter and route table memory regions is
changed to take memory region IDs, rather than determining which
region to validate based on a set of Boolean flags.
Finally, ipa_mem_find() is created to abstract getting a memory
descriptor based on its ID, and it is used everywhere rather than
indexing the array. With that implemented, all of the memory
regions can be defined by arrays of entries defined without
providing index designators.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Finally the code handles the IPA memory region array in the
configuration data without assuming it is indexed by region ID.
Get rid of the array index designators where these arrays are
initialized. As a result, there's no more need to define an
explicitly undefined memory region ID, so get rid of that.
Change ipa_mem_find() so it no longer assumes the ipa->mem[] array
is indexed by memory region ID. Instead, have it search the array
for the entry having the requested memory ID, and return the address
of the descriptor if found. Otherwise return NULL.
Stop allowing memory regions to be defined with zero size and zero
canary value. Check for this condition in ipa_mem_valid_one().
As a result, it is not necessary to check for this case in
ipa_mem_config().
Finally, there is no need for IPA_MEM_UNDEFINED to be defined any
more, so get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new function that abstracts finding information about a
region in IPA-local memory, given its memory region ID. For now it
simply uses the region ID as an index into the IPA memory array.
If the region is not defined, ipa_mem_find() returns a null pointer.
Update all code that accesses the ipa->mem[] array directly to use
ipa_mem_find() instead. The return value must be checked for null
when optional memory regions are sought.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stop passing most of the Boolean flags to ipa_table_valid_one(), and
just pass a memory region ID to it instead. We still need to
indicate whether we're operating on a routing or filter table.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>