Commit graph

1,029,448 commits

Author SHA1 Message Date
Geoffrey D. Bennett
2661f033c4 ALSA: usb-audio: scarlett2: Read mixer volumes at init time
Add support for reading the mixer volumes from the hardware when the
driver is initialising. Previously these ALSA volume controls were
initialised to zero instead of being initialised to match the hardware
state.

Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Suggested-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Tested-by: Markus Schroetter <project.m.schroetter@gmail.com>
Tested-by: Alex Fellows <alex.fellows@gmail.com>
Tested-by: Daniel Sales <daniel.sales.z@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/bb33fa9b79efc6f7a0f0e6fb7018cc8d4d59b3ba.1623091570.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-08 14:02:35 +02:00
Takashi Iwai
0280e07bbd Merge branch 'for-linus' into for-next 2021-06-08 14:02:06 +02:00
Jeremy Szu
600dd2a7e8 ALSA: hda/realtek: fix mute/micmute LEDs for HP ZBook Power G8
The HP ZBook Power G8 using ALC236 codec which using 0x02 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608114750.32009-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-08 14:01:18 +02:00
Hui Wang
57c9e21a49 ALSA: hda/realtek: headphone and mic don't work on an Acer laptop
There are 2 issues on this machine, the 1st one is mic's plug/unplug
can't be detected, that is because the mic is set to manual detecting
mode, need to apply ALC255_FIXUP_XIAOMI_HEADSET_MIC to set it to auto
detecting mode. The other one is headphone's plug/unplug can't be
detected by pulseaudio, that is because the pulseaudio will use
ucm2/sof-hda-dsp on this machine, and the ucm2 only handle
'Headphone Jack', but on this machine the headphone's pincfg sets the
location to Front, then the alsa mixer name is "Front Headphone Jack"
instead of "Headphone Jack", so override the pincfg to change location
to Left.

BugLink: http://bugs.launchpad.net/bugs/1930188
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210608024600.6198-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-08 14:00:41 +02:00
Rikard Falkeborn
59d697a99d perf/hisi: Constify static attribute_group structs
These are only put in an array of pointers to const attribute_group
structs. Make them const like the other static attribute_group structs
to allow the compiler to put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210605221514.73449-1-rikard.falkeborn@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 12:49:54 +01:00
Robin van der Gracht
015511e2b6 ARM: dts: imx6dl-prtvt7: Remove unused 'sound-dai-cells' from ssi1 node
The 'fsl,ssi' documentation doesn't say anything about specifying this.

Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08 19:49:10 +08:00
Robin van der Gracht
a616f385a1 ARM: dts: imx6dl-prtvt7: The sgtl5000 uses i2s not ac97
According to Documentation/devicetree/bindings/sound/fsl,ssi.txt
'fsl,mode' should be specified for AC97 mode only.

Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08 19:49:07 +08:00
Oleksij Rempel
913dca88a1 ARM: dts: imx6qdl-vicut1: add interrupt-counter nodes
interrupt-counter is mainline now, so we can add missing counter nodes.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08 19:49:05 +08:00
Robin van der Gracht
65ce746ec1 ARM: dts: imx6dl-prtvt7: Enable the VPU
Enable Video Processing Unit to make accelerated video decoding work.

Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08 19:49:03 +08:00
Oleksij Rempel
6f64e703ce ARM: dts: imx6dl: enable touchscreen debounce filter on PLYM2M and PRTVT7 boards
Activate low-pass/debounce filter on the touchscreen.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08 19:49:00 +08:00
Oleksij Rempel
e6d762b0a6 ARM: dts: imx6dl-plym2m: remove touchscreen-size-* properties
Remove touchscreen-size-* properties.  This values are not correct, event if it
works with ts_test tool, it fails to work properly with weston.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08 19:48:58 +08:00
Oleksij Rempel
76c32fc24f ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node.
At some point PWM cell count was changed, but it didn't triggered any
error, since this DT was overwriting "#pwm-cells".
To make sure, we are in sync with the kernel driver, remove this
property and fix the pwm consumer.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08 19:48:55 +08:00
Oleksij Rempel
40610b8134 ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio
The backlight power is controlled through the reg_bl_12v0 regulator.

Co-Developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08 19:48:52 +08:00
ChenXiaoSong
5ca54404e6 perf: qcom: Remove redundant dev_err call in qcom_l3_cache_pmu_probe()
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Link: https://lore.kernel.org/r/20210608084816.1046485-1-chenxiaosong2@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 12:48:39 +01:00
Oleksij Rempel
e142835034 ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node
Add touchscreen support to the Protonic VT7 board.

Co-Developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-06-08 19:48:39 +08:00
Zhen Lei
f115f3c0d5 iommu/arm-smmu-v3: Decrease the queue size of evtq and priq
Commit d25f6ead16 ("iommu/arm-smmu-v3: Increase maximum size of queues")
expands the cmdq queue size to improve the success rate of concurrent
command queue space allocation by multiple cores. However, this extension
does not apply to evtq and priq, because for both of them, the SMMU driver
is the consumer. Instead, memory resources are wasted. Therefore, the
queue size of evtq and priq is restored to the original setting, one page.

Fixes: d25f6ead16 ("iommu/arm-smmu-v3: Increase maximum size of queues")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210531123553.9602-1-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 12:35:55 +01:00
Jean-Philippe Brucker
9cff922bba iommu/arm-smmu-v3: Ratelimit event dump
When a device or driver misbehaves, it is possible to receive DMA fault
events much faster than we can print them out, causing a lock up of the
system and inability to cancel the source of the problem. Ratelimit
printing of events to help recovery.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210531095648.118282-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 12:35:55 +01:00
Jean-Philippe Brucker
395ad89d11 iommu/arm-smmu-v3: Add stall support for platform devices
The SMMU provides a Stall model for handling page faults in platform
devices. It is similar to PCIe PRI, but doesn't require devices to have
their own translation cache. Instead, faulting transactions are parked
and the OS is given a chance to fix the page tables and retry the
transaction.

Enable stall for devices that support it (opt-in by firmware). When an
event corresponds to a translation error, call the IOMMU fault handler.
If the fault is recoverable, it will call us back to terminate or
continue the stall.

To use stall device drivers need to enable IOMMU_DEV_FEAT_IOPF, which
initializes the fault queue for the device.

Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210526161927.24268-4-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 12:35:55 +01:00
Jean-Philippe Brucker
6522b1e0c7 ACPI/IORT: Enable stall support for platform devices
Copy the "Stall supported" bit, that tells whether a named component
supports stall, into the dma-can-stall device property.

Acked-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210526161927.24268-3-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 12:35:55 +01:00
Jean-Philippe Brucker
ed1d08b9d0 dt-bindings: Document stall property for IOMMU masters
On ARM systems, some platform devices behind an IOMMU may support stall,
which is the ability to recover from page faults. Let the firmware tell us
when a device supports stall.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210526161927.24268-2-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 12:35:50 +01:00
Eric Anholt
19c07b91f8 arm64: dts: msm8996: Mark the GPU's SMMU as an adreno one.
This enables the adreno-specific SMMU path that sets HUPCF so
(user-managed) page faults don't wedge the GPU.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210326231303.3071950-2-eric@anholt.net
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 12:35:50 +01:00
Eric Anholt
a242f4297c iommu/arm-smmu-qcom: Skip the TTBR1 quirk for db820c.
db820c wants to use the qcom smmu path to get HUPCF set (which keeps
the GPU from wedging and then sometimes wedging the kernel after a
page fault), but it doesn't have separate pagetables support yet in
drm/msm so we can't go all the way to the TTBR1 path.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210326231303.3071950-1-eric@anholt.net
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 12:35:50 +01:00
Martin Botka
6321484d1c iommu/arm-smmu-qcom: Add sm6125 compatible
Add compatible for SM6125 SoC

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210523212535.740979-1-martin.botka@somainline.org
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 12:35:43 +01:00
Christian König
2d2ddb589d drm/ttm: fix deref of bo->ttm without holding the lock v2
We need to grab the resv lock first before doing that check.

v2 (chk): simplify the change for -fixes

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130041.1683-1-christian.koenig@amd.com
2021-06-08 13:24:15 +02:00
Eugen Hristev
629de518e6 media: atmel: atmel-isc: add his_entry to register offsets
Add his_entry to the reg offsets struct.
This will allow different products to have a different reg offset for this
particular module.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 13:08:42 +02:00
Eugen Hristev
d51470069e media: atmel: atmel-isc: add support for version register
Add support for version register and print it at probe time.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 13:06:41 +02:00
Eugen Hristev
e891009857 media: atmel: atmel-isc: add DMA to register offsets
The DMA submodule is a part of the atmel-isc pipeline, and stands for
Direct Memory Access. It acts like a master on the AXI bus of the SoC, and
can directly write the RAM area with the pixel data from the ISC internal
sram.
Add dma to the reg offsets struct.
This will allow different products to have a different reg offset for this
particular module.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 13:06:05 +02:00
Eugen Hristev
1a3ac5d515 media: atmel: atmel-isc: add HIS to register offsets
The HIS submodule is a part of the atmel-isc pipeline, and stands for
Histogram. This module performs a color histogram that can be read and used
by the main processor.
Add his to the reg offsets struct.
This will allow different products to have a different reg offset for this
particular module.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 13:04:36 +02:00
Eugen Hristev
40ee17d1b4 media: atmel: atmel-isc: add RLP to register offsets
The RLP submodule is a part of the atmel-isc pipeline, and stands for
Rounding,Limiting and Packaging. It used to extract specific data from the
ISC pipeline. For example if we want to output greyscale 8 bit, we would
use limiting to 8 bits, and packaging to Luma component only.
Add rlp to the reg offsets struct.
This will allow different products to have a different reg offset for this
particular module.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:59:42 +02:00
Eugen Hristev
87b62b6d55 media: atmel: atmel-isc: add SUB422 and SUB420 to register offsets
The SUB submodules are a part of the atmel-isc pipeline, and stand for
Subsampling. They are used to subsample the original YUV 4:4:4 pixel ratio
aspect to either 4:2:2 or 4:2:0.
Add sub420 and sub422 to the reg offsets struct.
This will allow different products to have a different reg offset for these
particular modules.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:58:27 +02:00
Eugen Hristev
4fc9e8a775 media: atmel: atmel-isc: add CBC to the reg offsets struct
The CBC submodule is a part of the atmel-isc pipeline, and stands for
Contrast Brightness Control. It is used to apply gains and offsets to the
luma (Y) and chroma (U, V) components of the YUV elements.
Add cbc to the reg offsets struct. This will allow different products
to have a different reg offset for this particular module.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:57:55 +02:00
Eugen Hristev
d3b2ee5478 media: atmel: atmel-isc: extract CBC submodule config into separate function
The CBC submodule is a part of the atmel-isc pipeline, and stands for
Contrast Brightness Control. It is used to apply gains and offsets to the
luma (Y) and chroma (U, V) components of the YUV elements.
The CBC submodule should be initialized in the product specific driver
as it's product specific. Other products can implement it differently

[hverkuil: made isc_sama5d2_config_cbc static]

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:57:28 +02:00
Eugen Hristev
ffeeb01d11 media: atmel: atmel-isc: create register offsets struct
Create a struct that holds register offsets that are product specific.
Add initially the CSC register.
This allows each product that contains a variant of the ISC to add their
own register offset.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:57:07 +02:00
Eugen Hristev
c59744de8a media: atmel: atmel-isc-base: add id to clock debug message
Add the clock id to the debug message regarding clock setup

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:53:06 +02:00
Eugen Hristev
2ede3975c0 media: atmel: atmel-isc: extract CSC submodule config into separate function
The CSC submodule is a part of the atmel-isc pipeline, and stands for
Color Space Conversion. It is used to apply a matrix transformation to
RGB pixels to convert them to the YUV components.
The CSC submodule should be initialized in the product specific driver
as it's product specific. Other products can implement it differently.

[hverkuil: made isc_sama5d2_config_csc static]

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:52:15 +02:00
Eugen Hristev
cd5af39467 media: atmel: atmel-isc: specialize dma cfg
The dma configuration (DCFG) is specific to the product.
Move this configuration in the product specific driver, and add the
field inside the driver struct.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:50:27 +02:00
Thierry Reding
0d97174aea iommu/arm-smmu: Implement ->probe_finalize()
Implement a ->probe_finalize() callback that can be used by vendor
implementations to perform extra programming necessary after devices
have been attached to the SMMU.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-4-thierry.reding@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 11:34:22 +01:00
Marek Vasut
96b7182d8c
drm/bridge: ti-sn65dsi83: Fix syntax formatting issues
Fix checkpatch.pl --strict -f drivers/gpu/drm/bridge/ti-sn65dsi83.c
CHECKs, no functional change. This is the same modification done
to V7 of the original patch.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Valentin Raevsky <valentin@compulab.co.il>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608095322.23644-1-marex@denx.de
2021-06-08 12:29:31 +02:00
Tejas Upadhyay
31b77c70d9 x86/gpu: add JasperLake to gen11 early quirks
Let's reserve JSL stolen memory for graphics.

JasperLake is a gen11 platform which is compatible with
ICL/EHL changes.

This was missed in commit 24ea098b7c ("drm/i915/jsl: Split
EHL/JSL platform info and PCI ids")

V2:
    - Added maintainer list in cc
    - Added patch ref in commit message
V1:
    - Added Cc: x86@kernel.org

Fixes: 24ea098b7c ("drm/i915/jsl: Split EHL/JSL platform info and PCI ids")
Cc: <stable@vger.kernel.org> # v5.11+
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608053411.394166-1-tejaskumarx.surendrakumar.upadhyay@intel.com
2021-06-08 12:24:43 +02:00
Eugen Hristev
f794bc16a5 media: atmel: atmel-isc: specialize max width and max height
Move the max width and max height constants to the product specific driver
and have them in the device struct.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:19:28 +02:00
Eugen Hristev
5122e8d15a media: atmel: atmel-isc: add checks for limiting frame sizes
When calling the subdev, certain subdev drivers will overwrite the
frame size and adding sizes which are beyond the ISC's capabilities.
Thus we need to ensure the frame size is cropped to the maximum caps.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:19:05 +02:00
Eugen Hristev
d5475b3c90 media: atmel: atmel-isc: specialize driver name constant
The driver name constant must defined based on product driver, thus moving
the constant directly where it's required. This will allow each ISC based
product to define it's own name.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:18:45 +02:00
Eugen Hristev
f84bc784fa media: atmel: atmel-isc: specialize gamma table into product specific
Separate the gamma table from the isc base file into the specific sama5d2
product file.
Add a pointer to the gamma table and entries count inside the platform
driver specific struct.

[hverkuil: made isc_sama5d2_gamma_table static]

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:17:54 +02:00
John Cox
269b4dd3e8 media: hevc: Add sps_max_sub_layers_minus1 to v4l2_ctrl_hevc_sps
sps_max_sub_layers_minus1 is needed if the driver wishes to determine
whether or not a frame might be used for reference.

Signed-off-by: John Cox <jc@kynesim.co.uk>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:14:57 +02:00
Tomi Valkeinen
c9cbf021c8 media: vivid: use vb2_queue_change_type
Use the new vb2_queue_change_type() function in .vidioc_reqbufs and
.vidioc_create_bufs instead of changing the queue type manually in
vidioc_s_fmt_vbi_cap() and vidioc_s_fmt_sliced_vbi_cap().

This allows for a more consistent behavior, as .vidioc_reqbufs and
.vidioc_create_bufs are when the queue will become "busy".

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:06:55 +02:00
Tomi Valkeinen
2d8b2a6431 media: vivid: remove stream_sliced_vbi_cap field
Vivid tracks the VBI capture mode in vivid_dev->stream_sliced_vbi_cap
field.  We can just look at the buffer type instead, and drop the field.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:04:36 +02:00
Tomi Valkeinen
a810ed0b33 media: videobuf2-v4l2.c: add vb2_queue_change_type() helper
On some platforms a video device can capture either video data or
metadata. The driver can implement vidioc functions for both video and
metadata, and use a single vb2_queue for the buffers. However, vb2_queue
requires choosing a single buffer type, which conflicts with the idea of
capturing either video or metadata.

The buffer type of vb2_queue can be changed, but it's not obvious how
this should be done in the drivers. To help this, add a new helper
function vb2_queue_change_type() which ensures the correct checks and
documents how it can be used.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 12:04:08 +02:00
Bixuan Cui
d56d5162e3 iommu/arm-smmu-v3: Change *array into *const array
Fix checkpatch warning in arm-smmu-v3.c:
static const char * array should probably be static const char * const

Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 11:03:24 +01:00
Shawn Guo
a51627c5df iommu/arm-smmu-qcom: hook up qcom_smmu_impl for ACPI boot
The hookup with qcom_smmu_impl is required to do ACPI boot on SC8180X
based devices like Lenovo Flex 5G laptop and Microsoft Surface Pro X.
Define acpi_platform_list for these platforms and match them using
acpi_match_platform_list() call, and create qcom_smmu_impl accordingly.

(np == NULL) is used to check ACPI boot, because fwnode of SMMU device
is a static allocation and thus helpers like has_acpi_companion() don't
work here.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210509022607.17534-1-shawn.guo@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-08 11:03:09 +01:00
Christian König
f91142c621 drm/ttm: nuke VM_MIXEDMAP on BO mappings v3
We discussed if that is really the right approach for quite a while now, but
digging deeper into a bug report on arm turned out that this is actually
horrible broken right now.

The reason for this is that vmf_insert_mixed_prot() always tries to grab
a reference to the underlaying page on architectures without
ARCH_HAS_PTE_SPECIAL and as far as I can see also enabled GUP.

So nuke using VM_MIXEDMAP here and use VM_PFNMAP instead.

Also make sure to reject mappings without VM_SHARED.

v2: reject COW mappings, merge function with only caller
v3: adjust comment as suggested by Thomas

Signed-off-by: Christian König <christian.koenig@amd.com>
Bugs: https://gitlab.freedesktop.org/drm/amd/-/issues/1606#note_936174
Link: https://patchwork.freedesktop.org/patch/msgid/20210607135830.8574-1-christian.koenig@amd.com
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2021-06-08 11:47:51 +02:00