On m68k (Coldfire M547x):
CC drivers/net/ethernet/intel/i40e/i40e_main.o
In file included from drivers/net/ethernet/intel/i40e/i40e_prototype.h:9,
from drivers/net/ethernet/intel/i40e/i40e.h:41,
from drivers/net/ethernet/intel/i40e/i40e_main.c:12:
include/linux/avf/virtchnl.h:153:36: warning: division by zero [-Wdiv-by-zero]
153 | { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
| ^
include/linux/avf/virtchnl.h:844:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/avf/virtchnl.h:844:33: error: enumerator value for ‘virtchnl_static_assert_virtchnl_proto_hdrs’ is not an integer constant
844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
| ^~~~~~~~~~~~~~~~~~~
On m68k, integers are aligned on addresses that are multiples of two,
not four, bytes. Hence the size of a structure containing integers may
not be divisible by 4.
Fix this by adding explicit padding.
Fixes: 1f7ea1cd6a ("ice: Enable FDIR Configure for AVF")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently in the ice driver, the check whether to
allow a LLDP packet to egress the interface from the
PF_VSI is being based on the SKB's priority field.
It checks to see if the packets priority is equal to
TC_PRIO_CONTROL. Injected LLDP packets do not always
meet this condition.
SCAPY defaults to a sk_buff->protocol value of ETH_P_ALL
(0x0003) and does not set the priority field. There will
be other injection methods (even ones used by end users)
that will not correctly configure the socket so that
SKB fields are correctly populated.
Then ethernet header has to have to correct value for
the protocol though.
Add a check to also allow packets whose ethhdr->h_proto
matches ETH_P_LLDP (0x88CC).
Fixes: 0c3a6101ff ("ice: Allow egress control packets from PF_VSI")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ethtool incorrectly reported supported and advertised auto-negotiation
settings for a backplane PHY image which did not support auto-negotiation.
This can occur when using media or PHY type for reporting ethtool
supported and advertised auto-negotiation settings.
Remove setting supported and advertised auto-negotiation settings based
on PHY type in ice_phy_type_to_ethtool(), and MAC type in
ice_get_link_ksettings().
Ethtool supported and advertised auto-negotiation settings should be
based on the PHY image using the AQ command get PHY capabilities with
media. Add setting supported and advertised auto-negotiation settings
based get PHY capabilities with media in ice_get_link_ksettings().
Fixes: 48cb27f2fd ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
VSI rebuild can be failed for LAN queue config, then the VF's VSI will
be NULL, the VF reset should be stopped with the VF entering into the
disable state.
Fixes: 12bb018c53 ("ice: Refactor VF reset")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Some AVF drivers expect the VF_MBX_ATQLEN register to be cleared for any
type of VFR/VFLR. Fix this by clearing the VF_MBX_ATQLEN register at the
same time as VF_MBX_ARQLEN.
Fixes: 82ba01282c ("ice: clear VF ARQLEN register on reset")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 12bb018c53 ("ice: Refactor VF reset") caused a regression
that removes the ability for a VF to request a different amount of
queues via VIRTCHNL_OP_REQUEST_QUEUES. This prevents VF drivers to
either increase or decrease the number of queue pairs they are
allocated. Fix this by using the variable vf->num_req_qs when
determining the vf->num_vf_qs during VF VSI creation.
Fixes: 12bb018c53 ("ice: Refactor VF reset")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add this option to enable the IOMMU on platforms like AMD Stoney,
where the kernel usually disables it because it may cause problems in
some scenarios.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20210603130203.29016-1-joro@8bytes.org
print_iommu_info prints the EFR register and then the decoded list of
features on a separate line:
pci 0000:00:00.2: AMD-Vi: Extended features (0x206d73ef22254ade):
PPR X2APIC NX GT IA GA PC GA_vAPIC
The second line is emitted via 'pr_cont', which causes it to have a
different ('warn') loglevel compared to the previous line ('info').
Commit 9a295ff0ff attempted to rectify this by removing the newline
from the pci_info format string, but this doesn't work, as pci_info
calls implicitly append a newline anyway.
Printing the decoded features on the same line would make it quite long.
Instead, change pci_info() to pr_info() to omit PCI bus location info,
which is also shown in the preceding message. This results in:
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x206d73ef22254ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
Fixes: 9a295ff0ff ("iommu/amd: Print extended features in one line to fix divergent log levels")
Link: https://lore.kernel.org/lkml/alpine.LNX.2.20.13.2104112326460.11104@monopod.intra.ispras.ru
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: iommu@lists.linux-foundation.org
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20210504102220.1793-1-amonakov@ispras.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
WCD934x has Multi Button Headset Control hardware to support Headset insertion,
type detection, 8 headset buttons detection, Over Current detection and Impedence
measurements.
This patch adds support for this feature via common mbhc layer.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210604115230.23259-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Most new Qualcomm WCD codecs support MBHC(Multi Button Headset Control) via ADC.
This patchset adds support to Common parts of this MBHC support so that
WCD codecs need not duplicate them. To do that codec exposes set of
register fields and callbacks to this common driver to control it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210604115230.23259-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings required for Multi Button Headset detection.
WCD934x support Headsets with upto 8 buttons including, impedance measurement
on both L/R Headset speakers and cross connection detection.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210604115230.23259-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following compilation warning using W=1 build:
arm-linux-gnueabi-ld: drivers/spi/spi-stm32-qspi.o: in function `stm32_qspi_poll_status':
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20210604075009.25914-1-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For rk3399pro boards the tcs4526 regulator supports the vdd_gpu
regulator. The tcs4526 regulator has a chip id of <0>.
Add the compatibile tcs,tcs4526
without this patch, the dmesg output is:
fan53555-regulator 0-0010: Chip ID 0 not supported!
fan53555-regulator 0-0010: Failed to setup device!
fan53555-regulator: probe of 0-0010 failed with error -22
with this patch, the dmesg output is:
vdd_gpu: supplied by vcc5v0_sys
The regulators are described as:
- Dedicated power management IC TCS4525
- Lithium battery protection chip TCS4526
This has been tested with a Radxa Rock Pi N10.
Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com>
Link: https://lore.kernel.org/r/20210602112943.GA119@5f9be87369f8
Signed-off-by: Mark Brown <broonie@kernel.org>
With CONFIG_SND_SOC_LPASS_RX_MACRO=m and CONFIG_REGMAP_MMIO undefined,
build fails with the following error
make -f /var/tmp/portage/sys-kernel/stable-sources-5.12.8/work/linux-5.12.8-stable/scripts/Makefile.modpost
sed 's/\.ko$/\.o/' modules.order | scripts/mod/modpost -E -o modules-only.symvers -i vmlinux.symvers -T -
ERROR: modpost: "__devm_regmap_init_mmio_clk" [sound/soc/codecs/snd-soc-lpass-rx-macro.ko] undefined!
This does also apply to other Qualcomm Macro LPASS all making call to
devm_regmap_init_mmio()
Signed-off-by: Bertrand Jacquin <bertrand@jacquin.bzh>
Link: https://lore.kernel.org/r/20210603221816.2642402-1-bertrand@jacquin.bzh
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously, when the value of the "devspec" sysfs attribute was read from
the user space there was no newline present, and utilities such as "cat"
wouldn't display the result of the read correctly.
Append a newline character in the show() function to match other "devspec"
attributes.
Link: https://lore.kernel.org/r/20210603000112.703037-5-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
The value of the "resource_alignment" can be specified using a kernel
command-line argument ("pci=resource_alignment=") or through the
corresponding sysfs attribute under the /sys/bus/pci path.
Previously, when the value was set via the kernel command-line argument,
and then subsequently accessed through sysfs attribute, the value read back
was not correct:
# grep -oE 'pci=resource_alignment.+' /proc/cmdline
pci=resource_alignment=20@00:1f.2
# cat /sys/bus/pci/resource_alignment
20@00:1f.
This was also true when the value was set through the sysfs attribute
without including a trailing newline:
# echo -n 20@00:1f.2 > /sys/bus/pci/resource_alignment
# cat /sys/bus/pci/resource_alignment
20@00:1f.
When it was set through the sysfs attribute *including* a newline,
reading it back worked as intended:
# echo 20@00:1f.2 > /sys/bus/pci/resource_alignment
# cat /sys/bus/pci/resource_alignment
20@00:1f.2
To fix this inconsistency, append a trailing newline in the show() function
and strip the trailing line in the store() function if one is present.
Also, allow for the value previously set using either a command-line
argument or through the sysfs object to be cleared at run-time.
[bhelgaas: fold in kfree fix from
https://lore.kernel.org/linux-pci/20210604133230.983956-4-kw@linux.com]
Fixes: e499081da1 ("PCI: Force trailing new line to resource_alignment_param in sysfs")
Link: https://lore.kernel.org/r/20210603000112.703037-4-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
There is an uppercase letter I in one of the MCE error descriptions
instead of a lowercase one. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lkml.kernel.org/r/20210603103349.79117-1-colin.king@canonical.com
Revert commit 4698f88c06 ("sched/debug: Fix 'schedstats=enable'
cmdline option").
After commit 6041186a32 ("init: initialize jump labels before
command line option parsing") we can rely on jump label infra being
ready for use when setup_schedstats() is called.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20210602112108.1709635-1-eric.dumazet@gmail.com
Use DEVICE_ATTR_RO() helper macro instead of DEVICE_ATTR(), which makes
the code a bit shorter and easier to read.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210603090506.11771-1-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Starting from iLO ASIC 'Neches' with subsystem device id 0x00E4,
bar 5 is used for shared memory region mapping instead of bar 2
because bar 2 is made inaccessible after system POST for security
reason.
As this holds true for future iLO ASIC generations, it does not
make sense to map shared memory region according to the subsystem
device id of each following generations.
Map iLO shared memory region with PCI revision id that maps to the
iLO ASIC generation, starting from Neches (Rev 7).
Signed-off-by: Matt Hsiao <matt.hsiao@hpe.com>
Link: https://lore.kernel.org/r/20210531085551.26421-1-matt.hsiao@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 1366a3db3d ("staging: unisys: visorbus: visorchipset_init clean
up gotos") assigns the initial value -ENODEV to the local variable 'err',
and the first several error branches will return this value after "goto
error". But commit f1f537c2e7 ("staging: unisys: visorbus: Consolidate
controlvm channel creation.") overwrites 'err' in the middle of the way.
As a result, some error branches do not successfully return the initial
value -ENODEV of 'err', but return 0.
In addition, when kzalloc() fails, -ENOMEM should be returned instead of
-ENODEV.
Fixes: f1f537c2e7 ("staging: unisys: visorbus: Consolidate controlvm channel creation.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210528082614.9337-1-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ASan reported a memory leak caused by info_linear not being deallocated.
The info_linear was allocated during in perf_event__synthesize_one_bpf_prog().
This patch adds the corresponding free() when bpf_prog_info_node
is freed in perf_env__purge_bpf().
$ sudo ./perf record -- sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]
=================================================================
==297735==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 7688 byte(s) in 19 object(s) allocated from:
#0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f)
#1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16
#2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16
#3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9
#4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8
#5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8
#6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8
#7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20210602224024.300485-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a section to notify the permission and sysctl setting for perf
probe. And fix some indentations.
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/162204068898.388434.16842705842611255787.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to verify that a given ACPI resource represents a GpioIo()
type of resource, and return it if so.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We need to be able to translate GPIO resources in an ACPI device's _CRS
into GPIO descriptor array. Those are represented in _CRS as a pathname
to a GPIO device plus the pin's index number: the acpi_get_gpiod()
function is perfect for that purpose.
As it's currently only used internally within the GPIO layer, provide and
export a wrapper function that additionally holds a reference to the GPIO
device.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
__bad_area_nosemaphore() calls both force_sig_pkuerr() and
force_sig_fault() when handling SEGV_PKUERR. This does not cause
problems because the second signal is filtered by the legacy_queue()
check in __send_signal() because in both cases, the signal is SIGSEGV,
the second one seeing that the first one is already pending.
This causes the kernel to do unnecessary work so send the signal only
once for SEGV_PKUERR.
[ bp: Massage commit message. ]
Fixes: 9db812dbb2 ("signal/x86: Call force_sig_pkuerr from __bad_area_nosemaphore")
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jiashuo Liang <liangjs@pku.edu.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/20210601085203.40214-1-liangjs@pku.edu.cn
Use DEVICE_ATTR_*() macro helper instead of plain DEVICE_ATTR, which makes
the code a bit shorter and easier to read.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210602014839.10587-1-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SCL gpio pin used by I2C bus for recovery needs to be configured as
open drain, so fix the binding example accordingly.
In relation with fix c5a2838025 ("ARM: dts: at91: Configure I2C SCL
gpio as open drain").
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 19e5cef058 ("dt-bindings: i2c: at91: document optional bus recovery properties")
Instead of both driver and TTM allocating memory finalize embedding the
ttm_resource object as base into the driver backends.
v2: fix typo in vmwgfx grid mgr and double init in amdgpu_vram_mgr.c
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602100914.46246-10-christian.koenig@amd.com
Access to the mm_node is now forbidden. So instead of hand wiring that
use the cursor functionality.
v2: fix handling as pointed out by Philip.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by and Tested-by: Philip Yang <philip.yang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602100914.46246-5-christian.koenig@amd.com
Add serial support for RZ/G2L SoC with earlycon and
extended mode register support.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210603221758.10305-11-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the hack to assign the global console_port variable at probe time.
This assumption that cons->index is -1 is wrong for systems that specify
'console=' in the cmdline (or 'stdout-path' in dts). Hence, on such system
the actual console assignment is ignored, and the first UART that happens
to be probed is used as console instead.
Move the logic to console_setup() and map the console to the correct port
through the array of available ports instead.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20210528133321.1859346-1-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GEHC CS ONE (codename is PPD), has multiple microcontrollers connected
via UART controlling. UART2 is connected to an on-board microcontroller
at 19200 baud, which constantly pushes critical data (so aging character
detect interrupt will never trigger). This data must be processed at
50-200 Hz, so UART should return data in less than 5-20ms. With 1024
byte DMA buffer (and a constant data stream) the read operation instead
needs 1024 byte / 19200 baud = 53.333ms, which is way too long (note:
Worst case would be remote processor sending data with short pauses <=
7 characters, which would further increase this number). The current
downstream kernel instead configures 24 bytes resulting in 1.25ms, but
that is obviously not sensible for normal UART use cases and cannot be
used as new default.
The same device also has another microcontroller with a 4M baud connected
to UART5 exchanging lots of data. For this the same mechanism can be used
to increase the buffer size (downstream uses 4K instead of the default 1K)
with potentially slightly reduced buffer count. At this baud rate latency
is not an issue (4096 byte / 4M baud = 0.977 ms). Before increasing the
default buffer count from 4 to 16 in 76c38d30fe, this was required to
avoid data loss. With the changed default it's a performance optimization.
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
[replace commit message]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210430175038.103226-3-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to optimize serial communication (performance/throughput VS
latency), we may need to tweak DMA period number and size. This adds
DT properties to configure those values before initialising DMA.
The defaults will stay the same as before.
[update documentation and commit message, rebase to current master,
switch back to DT instead of sysfs]
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210430175038.103226-2-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function slot_handler_func() has very deep indentations. Moving the
poll handling into separate function could improve the readability.
Use the return value to keep the poll_needed handling at the same place.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-17-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function parse_open() already has bail out sections like fail_open.
So use a goto for the other error cases like payload size is too small
and listening service cannot be found. This avoids two indentation levels.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622735405-9980-14-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>