Commit graph

1,029,448 commits

Author SHA1 Message Date
Marek Behún
72f9988894 firmware: turris-mox-rwtm: report failures better
Report a notice level message if a command is not supported by the rWTM
firmware.

This should not be an error, merely a notice, because the firmware can
be used on boards that do not have manufacturing information burned.

Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-06-17 14:53:03 +02:00
Marek Behún
e34e60253d firmware: turris-mox-rwtm: fix reply status decoding function
The status decoding function mox_get_status() currently contains an
incorrect check: if the error status is not MBOX_STS_SUCCESS, it always
returns -EIO, so the comparison to MBOX_STS_FAIL is never executed and
we don't get the actual error code sent by the firmware.

Fix this.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-06-17 14:51:06 +02:00
Yang Yingliang
114bacc75c
ASoC: spear: spdif_out: Use devm_platform_get_and_ioremap_resource()
Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210617032900.600124-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-17 13:47:06 +01:00
Yang Yingliang
19b71456f3
ASoC: sprd: Use devm_platform_get_and_ioremap_resource()
Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210617033237.605808-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-17 13:47:05 +01:00
Zhen Lei
7d3865a10b
ASoC: soc-core: Fix the error return code in snd_soc_of_parse_audio_routing()
When devm_kcalloc() fails, the error code -ENOMEM should be returned
instead of -EINVAL.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210617103729.1918-1-thunder.leizhen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-17 13:47:04 +01:00
Yang Yingliang
06e6d90440
ASoC: sti: sti_uniperif: Use devm_platform_get_and_ioremap_resource()
Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210617033903.613727-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-17 13:47:03 +01:00
Yang Yingliang
f3babad47e
ASoC: stm32: spdifrx: Use devm_platform_get_and_ioremap_resource()
Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210617043847.1113092-4-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-17 13:47:02 +01:00
Yang Yingliang
003ee640ab
ASoC: stm32: sai: Use devm_platform_get_and_ioremap_resource()
Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210617043847.1113092-3-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-17 13:47:01 +01:00
Yang Yingliang
2f17766919
ASoC: stm32: i2s: Use devm_platform_get_and_ioremap_resource()
Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210617043847.1113092-2-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-17 13:47:00 +01:00
Wei Yongjun
d7a188bb87 ACPI: PRM: make symbol 'prm_module_list' static
The sparse tool complains as follows:

drivers/acpi/prmt.c:53:1: warning:
 symbol 'prm_module_list' was not declared. Should it be static?

This symbol is not used outside of prmt.c, so marks it static.

Fixes: cefc7ca462 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-17 14:40:29 +02:00
Baokun Li
120f4aa80b ACPI: NVS: fix doc warnings in nvs.c
Fixes the following W=1 kernel build warning(s):

 drivers/acpi/nvs.c:94: warning: Function parameter or
  member 'start' not described in 'suspend_nvs_register'
 drivers/acpi/nvs.c:94: warning: Function parameter or
  member 'size' not described in 'suspend_nvs_register'

Signed-off-by: Baokun Li <libaokun1@huawei.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-17 14:36:32 +02:00
Baokun Li
6f2f92c6ae ACPI: sysfs: fix doc warnings in device_sysfs.c
Fixes the following W=1 kernel build warning(s):

 drivers/acpi/device_sysfs.c:278: warning: Function parameter or
  member 'dev' not described in 'acpi_device_uevent_modalias'
 drivers/acpi/device_sysfs.c:278: warning: Function parameter or
  member 'env' not described in 'acpi_device_uevent_modalias'
 drivers/acpi/device_sysfs.c:323: warning: Function parameter or
  member 'dev' not described in 'acpi_device_modalias'
 drivers/acpi/device_sysfs.c:323: warning: Function parameter or
  member 'buf' not described in 'acpi_device_modalias'
 drivers/acpi/device_sysfs.c:323: warning: Function parameter or
  member 'size' not described in 'acpi_device_modalias'

Signed-off-by: Baokun Li <libaokun1@huawei.com>
[ rjw: Fix spelling: acpi -> ACPI ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-17 14:32:05 +02:00
Wan Jiabing
795e0e38de cpuidle: teo: remove unneeded semicolon in teo_select()
Fix following coccicheck warning:
drivers/cpuidle/governors/teo.c:315:10-11: Unneeded semicolon

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-17 14:13:53 +02:00
Kan Liang
5471eea5d3 perf/x86: Reset the dirty counter to prevent the leak for an RDPMC task
The counter value of a perf task may leak to another RDPMC task.
For example, a perf stat task as below is running on CPU 0.

    perf stat -e 'branches,cycles' -- taskset -c 0 ./workload

In the meantime, an RDPMC task, which is also running on CPU 0, may read
the GP counters periodically. (The RDPMC task creates a fixed event,
but read four GP counters.)

    $./rdpmc_read_all_counters
    index 0x0 value 0x8001e5970f99
    index 0x1 value 0x8005d750edb6
    index 0x2 value 0x0
    index 0x3 value 0x0

    index 0x0 value 0x8002358e48a5
    index 0x1 value 0x8006bd1e3bc9
    index 0x2 value 0x0
    index 0x3 value 0x0

It is a potential security issue. Once the attacker knows what the other
thread is counting. The PerfMon counter can be used as a side-channel to
attack cryptosystems.

The counter value of the perf stat task leaks to the RDPMC task because
perf never clears the counter when it's stopped.

Three methods were considered to address the issue.

 - Unconditionally reset the counter in x86_pmu_del(). It can bring extra
   overhead even when there is no RDPMC task running.

 - Only reset the un-assigned dirty counters when the RDPMC task is
   scheduled in via sched_task(). It fails for the below case.

	Thread A			Thread B

	clone(CLONE_THREAD) --->
	set_affine(0)
					set_affine(1)
					while (!event-enabled)
						;
	event = perf_event_open()
	mmap(event)
	ioctl(event, IOC_ENABLE); --->
					RDPMC

   Counters are still leaked to the thread B.

 - Only reset the un-assigned dirty counters before updating the CR4.PCE
   bit. The method is implemented here.

The dirty counter is a counter, on which the assigned event has been
deleted, but the counter is not reset. To track the dirty counters,
add a 'dirty' variable in the struct cpu_hw_events.

The security issue can only be found with an RDPMC task. To enable the
RDMPC, the CR4.PCE bit has to be updated. Add a
perf_clear_dirty_counters() right before updating the CR4.PCE bit to
clear the existing dirty counters. Only the current un-assigned dirty
counters are reset, because the RDPMC assigned dirty counters will be
updated soon.

After applying the patch,

        $ ./rdpmc_read_all_counters
        index 0x0 value 0x0
        index 0x1 value 0x0
        index 0x2 value 0x0
        index 0x3 value 0x0

        index 0x0 value 0x0
        index 0x1 value 0x0
        index 0x2 value 0x0
        index 0x3 value 0x0

Performance

The performance of a context switch only be impacted when there are two
or more perf users and one of the users must be an RDPMC user. In other
cases, there is no performance impact.

The worst-case occurs when there are two users: the RDPMC user only
uses one counter; while the other user uses all available counters.
When the RDPMC task is scheduled in, all the counters, other than the
RDPMC assigned one, have to be reset.

Test results for the worst-case, using a modified lat_ctx as measured
on an Ice Lake platform, which has 8 GP and 3 FP counters (ignoring
SLOTS).

    lat_ctx -s 128K -N 1000 processes 2

Without the patch:
  The context switch time is 4.97 us

With the patch:
  The context switch time is 5.16 us

There is ~4% performance drop for the context switching time in the
worst-case.

Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1623693582-187370-1-git-send-email-kan.liang@linux.intel.com
2021-06-17 14:11:47 +02:00
Peter Zijlstra
94aafc3ee3 sched/fair: Age the average idle time
This is a partial forward-port of Peter Ziljstra's work first posted
at:

   https://lore.kernel.org/lkml/20180530142236.667774973@infradead.org/

Currently select_idle_cpu()'s proportional scheme uses the average idle
time *for when we are idle*, that is temporally challenged.  When a CPU
is not at all idle, we'll happily continue using whatever value we did
see when the CPU goes idle. To fix this, introduce a separate average
idle and age it (the existing value still makes sense for things like
new-idle balancing, which happens when we do go idle).

The overall goal is to not spend more time scanning for idle CPUs than
we're idle for. Otherwise we're inhibiting work. This means that we need to
consider the cost over all the wake-ups between consecutive idle periods.
To track this, the scan cost is subtracted from the estimated average
idle time.

The impact of this patch is related to workloads that have domains that
are fully busy or overloaded. Without the patch, the scan depth may be
too high because a CPU is not reaching idle.

Due to the nature of the patch, this is a regression magnet. It
potentially wins when domains are almost fully busy or overloaded --
at that point searches are likely to fail but idle is not being aged
as CPUs are active so search depth is too large and useless. It will
potentially show regressions when there are idle CPUs and a deep search is
beneficial. This tbench result on a 2-socket broadwell machine partially
illustates the problem

                          5.13.0-rc2             5.13.0-rc2
                             vanilla     sched-avgidle-v1r5
Hmean     1        445.02 (   0.00%)      451.36 *   1.42%*
Hmean     2        830.69 (   0.00%)      846.03 *   1.85%*
Hmean     4       1350.80 (   0.00%)     1505.56 *  11.46%*
Hmean     8       2888.88 (   0.00%)     2586.40 * -10.47%*
Hmean     16      5248.18 (   0.00%)     5305.26 *   1.09%*
Hmean     32      8914.03 (   0.00%)     9191.35 *   3.11%*
Hmean     64     10663.10 (   0.00%)    10192.65 *  -4.41%*
Hmean     128    18043.89 (   0.00%)    18478.92 *   2.41%*
Hmean     256    16530.89 (   0.00%)    17637.16 *   6.69%*
Hmean     320    16451.13 (   0.00%)    17270.97 *   4.98%*

Note that 8 was a regression point where a deeper search would have helped
but it gains for high thread counts when searches are useless. Hackbench
is a more extreme example although not perfect as the tasks idle rapidly

hackbench-process-pipes
                          5.13.0-rc2             5.13.0-rc2
                             vanilla     sched-avgidle-v1r5
Amean     1        0.3950 (   0.00%)      0.3887 (   1.60%)
Amean     4        0.9450 (   0.00%)      0.9677 (  -2.40%)
Amean     7        1.4737 (   0.00%)      1.4890 (  -1.04%)
Amean     12       2.3507 (   0.00%)      2.3360 *   0.62%*
Amean     21       4.0807 (   0.00%)      4.0993 *  -0.46%*
Amean     30       5.6820 (   0.00%)      5.7510 *  -1.21%*
Amean     48       8.7913 (   0.00%)      8.7383 (   0.60%)
Amean     79      14.3880 (   0.00%)     13.9343 *   3.15%*
Amean     110     21.2233 (   0.00%)     19.4263 *   8.47%*
Amean     141     28.2930 (   0.00%)     25.1003 *  11.28%*
Amean     172     34.7570 (   0.00%)     30.7527 *  11.52%*
Amean     203     41.0083 (   0.00%)     36.4267 *  11.17%*
Amean     234     47.7133 (   0.00%)     42.0623 *  11.84%*
Amean     265     53.0353 (   0.00%)     47.7720 *   9.92%*
Amean     296     60.0170 (   0.00%)     53.4273 *  10.98%*
Stddev    1        0.0052 (   0.00%)      0.0025 (  51.57%)
Stddev    4        0.0357 (   0.00%)      0.0370 (  -3.75%)
Stddev    7        0.0190 (   0.00%)      0.0298 ( -56.64%)
Stddev    12       0.0064 (   0.00%)      0.0095 ( -48.38%)
Stddev    21       0.0065 (   0.00%)      0.0097 ( -49.28%)
Stddev    30       0.0185 (   0.00%)      0.0295 ( -59.54%)
Stddev    48       0.0559 (   0.00%)      0.0168 (  69.92%)
Stddev    79       0.1559 (   0.00%)      0.0278 (  82.17%)
Stddev    110      1.1728 (   0.00%)      0.0532 (  95.47%)
Stddev    141      0.7867 (   0.00%)      0.0968 (  87.69%)
Stddev    172      1.0255 (   0.00%)      0.0420 (  95.91%)
Stddev    203      0.8106 (   0.00%)      0.1384 (  82.92%)
Stddev    234      1.1949 (   0.00%)      0.1328 (  88.89%)
Stddev    265      0.9231 (   0.00%)      0.0820 (  91.11%)
Stddev    296      1.0456 (   0.00%)      0.1327 (  87.31%)

Again, higher thread counts benefit and the standard deviation
shows that results are also a lot more stable when the idle
time is aged.

The patch potentially matters when a socket was multiple LLCs as the
maximum search depth is lower. However, some of the test results were
suspiciously good (e.g. specjbb2005 gaining 50% on a Zen1 machine) and
other results were not dramatically different to other mcahines.

Given the nature of the patch, Peter's full series is not being forward
ported as each part should stand on its own. Preferably they would be
merged at different times to reduce the risk of false bisections.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210615111611.GH30378@techsingularity.net
2021-06-17 14:11:44 +02:00
Lukasz Luba
8f1b971b47 sched/cpufreq: Consider reduced CPU capacity in energy calculation
Energy Aware Scheduling (EAS) needs to predict the decisions made by
SchedUtil. The map_util_freq() exists to do that.

There are corner cases where the max allowed frequency might be reduced
(due to thermal). SchedUtil as a CPUFreq governor, is aware of that
but EAS is not. This patch aims to address it.

SchedUtil stores the maximum allowed frequency in
'sugov_policy::next_freq' field. EAS has to predict that value, which is
the real used frequency. That value is made after a call to
cpufreq_driver_resolve_freq() which clamps to the CPUFreq policy limits.
In the existing code EAS is not able to predict that real frequency.
This leads to energy estimation errors.

To avoid wrong energy estimation in EAS (due to frequency miss prediction)
make sure that the step which calculates Performance Domain frequency,
is also aware of the allowed CPU capacity.

Furthermore, modify map_util_freq() to not extend the frequency value.
Instead, use map_util_perf() to extend the util value in both places:
SchedUtil and EAS, but for EAS clamp it to max allowed CPU capacity.
In the end, we achieve the same desirable behavior for both subsystems
and alignment in regards to the real CPU frequency.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> (For the schedutil part)
Link: https://lore.kernel.org/r/20210614191238.23224-1-lukasz.luba@arm.com
2021-06-17 14:11:43 +02:00
Lukasz Luba
489f16459e sched/fair: Take thermal pressure into account while estimating energy
Energy Aware Scheduling (EAS) needs to be able to predict the frequency
requests made by the SchedUtil governor to properly estimate energy used
in the future. It has to take into account CPUs utilization and forecast
Performance Domain (PD) frequency. There is a corner case when the max
allowed frequency might be reduced due to thermal. SchedUtil is aware of
that reduced frequency, so it should be taken into account also in EAS
estimations.

SchedUtil, as a CPUFreq governor, knows the maximum allowed frequency of
a CPU, thanks to cpufreq_driver_resolve_freq() and internal clamping
to 'policy::max'. SchedUtil is responsible to respect that upper limit
while setting the frequency through CPUFreq drivers. This effective
frequency is stored internally in 'sugov_policy::next_freq' and EAS has
to predict that value.

In the existing code the raw value of arch_scale_cpu_capacity() is used
for clamping the returned CPU utilization from effective_cpu_util().
This patch fixes issue with too big single CPU utilization, by introducing
clamping to the allowed CPU capacity. The allowed CPU capacity is a CPU
capacity reduced by thermal pressure raw value.

Thanks to knowledge about allowed CPU capacity, we don't get too big value
for a single CPU utilization, which is then added to the util sum. The
util sum is used as a source of information for estimating whole PD energy.
To avoid wrong energy estimation in EAS (due to capped frequency), make
sure that the calculation of util sum is aware of allowed CPU capacity.

This thermal pressure might be visible in scenarios where the CPUs are not
heavily loaded, but some other component (like GPU) drastically reduced
available power budget and increased the SoC temperature. Thus, we still
use EAS for task placement and CPUs are not over-utilized.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20210614191128.22735-1-lukasz.luba@arm.com
2021-06-17 14:11:43 +02:00
Lukasz Luba
2ad8ccc17d thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
The thermal pressure signal gives information to the scheduler about
reduced CPU capacity due to thermal. It is based on a value stored in
a per-cpu 'thermal_pressure' variable. The online CPUs will get the
new value there, while the offline won't. Unfortunately, when the CPU
is back online, the value read from per-cpu variable might be wrong
(stale data).  This might affect the scheduler decisions, since it
sees the CPU capacity differently than what is actually available.

Fix it by making sure that all online+offline CPUs would get the
proper value in their per-cpu variable when thermal framework sets
capping.

Fixes: f12e4f66ab ("thermal/cpu-cooling: Update thermal pressure in case of a maximum frequency capping")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20210614191030.22241-1-lukasz.luba@arm.com
2021-06-17 14:11:43 +02:00
Dietmar Eggemann
83c5e9d573 sched/fair: Return early from update_tg_cfs_load() if delta == 0
In case the _avg delta is 0 there is no need to update se's _avg
(level n) nor cfs_rq's _avg (level n-1). These values stay the same.

Since cfs_rq's _avg isn't changed, i.e. no load is propagated down,
cfs_rq's _sum should stay the same as well.

So bail out after se's _sum has been updated.

Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210601083616.804229-1-dietmar.eggemann@arm.com
2021-06-17 14:11:42 +02:00
Vincent Guittot
9e077b52d8 sched/pelt: Check that *_avg are null when *_sum are
Check that we never break the rule that pelt's avg values are null if
pelt's sum are.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Odin Ugedal <odin@uged.al>
Link: https://lore.kernel.org/r/20210601155328.19487-1-vincent.guittot@linaro.org
2021-06-17 14:11:42 +02:00
Xiaofei Tan
ccb5ecdc2d ACPI: APEI: fix synchronous external aborts in user-mode
Before commit 8fcc4ae6fa ("arm64: acpi: Make apei_claim_sea()
synchronise with APEI's irq work"), do_sea() would unconditionally
signal the affected task from the arch code. Since that change,
the GHES driver sends the signals.

This exposes a problem as errors the GHES driver doesn't understand
or doesn't handle effectively are silently ignored. It will cause
the errors get taken again, and circulate endlessly. User-space task
get stuck in this loop.

Existing firmware on Kunpeng9xx systems reports cache errors with the
'ARM Processor Error' CPER records.

Do memory failure handling for ARM Processor Error Section just like
for Memory Error Section.

Fixes: 8fcc4ae6fa ("arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work")
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-17 14:05:28 +02:00
Lee Jones
91812dd093 bus: fsl-mc: mc-io: Correct misdocumentation of 'dpmcp_dev' param
Fixes the following W=1 kernel build warning(s):

 drivers/bus/fsl-mc/mc-io.c:70: warning: Function parameter or member 'dpmcp_dev' not described in 'fsl_create_mc_io'

Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17 13:44:33 +02:00
Lee Jones
b4fa2e831f bus: fsl-mc-msi: Fix a little doc-rot pertaining to 'np' to 'fwnode' conversion
Fixes the following W=1 kernel build warning(s):

 drivers/bus/fsl-mc/fsl-mc-msi.c:164: warning: Function parameter or member 'fwnode' not described in 'fsl_mc_msi_create_irq_domain'
 drivers/bus/fsl-mc/fsl-mc-msi.c:164: warning: Excess function parameter 'np' description in 'fsl_mc_msi_create_irq_domain'

Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: German Rivera <German.Rivera@freescale.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17 13:44:33 +02:00
Lee Jones
07fbbf2ae0 bus: fsl-mc: fsl-mc-allocator: Fix misspelling of 'new_mc_adev' and demote non-kernel-doc headers
Fixes the following W=1 kernel build warning(s):

 drivers/bus/fsl-mc/fsl-mc-allocator.c:271: warning: Function parameter or member 'new_mc_adev' not described in 'fsl_mc_object_allocate'
 drivers/bus/fsl-mc/fsl-mc-allocator.c:271: warning: Excess function parameter 'new_mc_dev' description in 'fsl_mc_object_allocate'
 drivers/bus/fsl-mc/fsl-mc-allocator.c:417: warning: Function parameter or member 'mc_bus_dev' not described in 'fsl_mc_cleanup_irq_pool'
 drivers/bus/fsl-mc/fsl-mc-allocator.c:417: warning: expecting prototype for Teardown the interrupt pool associated with an fsl(). Prototype was for fsl_mc_cleanup_irq_pool() instead
 drivers/bus/fsl-mc/fsl-mc-allocator.c:443: warning: Function parameter or member 'mc_dev' not described in 'fsl_mc_allocate_irqs'
 drivers/bus/fsl-mc/fsl-mc-allocator.c:443: warning: expecting prototype for Allocate the IRQs required by a given fsl(). Prototype was for fsl_mc_allocate_irqs() instead
 drivers/bus/fsl-mc/fsl-mc-allocator.c:586: warning: Function parameter or member 'mc_dev' not described in 'fsl_mc_allocator_probe'
 drivers/bus/fsl-mc/fsl-mc-allocator.c:618: warning: Function parameter or member 'mc_dev' not described in 'fsl_mc_allocator_remove'

Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17 13:44:33 +02:00
Lee Jones
5907c72c8d bus: fsl-mc: dprc-driver: Fix some missing/incorrect function parameter descriptions
Fixes the following W=1 kernel build warning(s):

 drivers/bus/fsl-mc/dprc-driver.c:360: warning: Function parameter or member 'alloc_interrupts' not described in 'dprc_scan_container'
 drivers/bus/fsl-mc/dprc-driver.c:383: warning: Function parameter or member 'irq_num' not described in 'dprc_irq0_handler'
 drivers/bus/fsl-mc/dprc-driver.c:383: warning: Excess function parameter 'irq' description in 'dprc_irq0_handler'
 drivers/bus/fsl-mc/dprc-driver.c:394: warning: Function parameter or member 'irq_num' not described in 'dprc_irq0_handler_thread'
 drivers/bus/fsl-mc/dprc-driver.c:394: warning: Excess function parameter 'irq' description in 'dprc_irq0_handler_thread'

Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: German Rivera <German.Rivera@freescale.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17 13:44:32 +02:00
Lee Jones
4c36624711 bus: fsl-mc: dprc: Fix a couple of misspelling and formatting issues
Fixes the following W=1 kernel build warning(s):

 drivers/bus/fsl-mc/dprc.c:345: warning: Function parameter or member 'attr' not described in 'dprc_get_attributes'
 drivers/bus/fsl-mc/dprc.c:521: warning: Function parameter or member 'obj_type' not described in 'dprc_get_obj_region'

Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17 13:44:32 +02:00
Lee Jones
d71b57dc07 bus: fsl-mc: fsl-mc-bus: Demote a bunch of non-conformant kernel-doc headers and help others
Fixes the following W=1 kernel build warning(s):

 drivers/bus/fsl-mc/fsl-mc-bus.c:30: warning: expecting prototype for Default DMA mask for devices on a fsl(). Prototype was for FSL_MC_DEFAULT_DMA_MASK() instead
 drivers/bus/fsl-mc/fsl-mc-bus.c:45: warning: Function parameter or member 'fsl_mc_regs' not described in 'fsl_mc'
 drivers/bus/fsl-mc/fsl-mc-bus.c:124: warning: Function parameter or member 'dev' not described in 'fsl_mc_bus_uevent'
 drivers/bus/fsl-mc/fsl-mc-bus.c:124: warning: Function parameter or member 'env' not described in 'fsl_mc_bus_uevent'
 drivers/bus/fsl-mc/fsl-mc-bus.c:480: warning: Function parameter or member 'mc_driver' not described in '__fsl_mc_driver_register'
 drivers/bus/fsl-mc/fsl-mc-bus.c:480: warning: Function parameter or member 'owner' not described in '__fsl_mc_driver_register'
 drivers/bus/fsl-mc/fsl-mc-bus.c:511: warning: Function parameter or member 'mc_driver' not described in 'fsl_mc_driver_unregister'
 drivers/bus/fsl-mc/fsl-mc-bus.c:571: warning: Function parameter or member 'dev' not described in 'fsl_mc_get_root_dprc'
 drivers/bus/fsl-mc/fsl-mc-bus.c:571: warning: Function parameter or member 'root_dprc_dev' not described in 'fsl_mc_get_root_dprc'
 drivers/bus/fsl-mc/fsl-mc-bus.c:739: warning: Function parameter or member 'dev' not described in 'fsl_mc_is_root_dprc'
 drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'obj_desc' not described in 'fsl_mc_device_add'
 drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'mc_io' not described in 'fsl_mc_device_add'
 drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'parent_dev' not described in 'fsl_mc_device_add'
 drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'new_mc_dev' not described in 'fsl_mc_device_add'
 drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: expecting prototype for Add a newly discovered fsl(). Prototype was for fsl_mc_device_add() instead
 drivers/bus/fsl-mc/fsl-mc-bus.c:1066: warning: Function parameter or member 'pdev' not described in 'fsl_mc_bus_probe'
 drivers/bus/fsl-mc/fsl-mc-bus.c:1190: warning: Function parameter or member 'pdev' not described in 'fsl_mc_bus_remove'

Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: German Rivera <German.Rivera@freescale.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17 13:44:32 +02:00
Lee Jones
33c6527a07 bus: fsl-mc: mc-sys: Supply missing function names in kernel-doc headers
Fixes the following W=1 kernel build warning(s):

 drivers/bus/fsl-mc/mc-sys.c:20: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/bus/fsl-mc/mc-sys.c:151: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/bus/fsl-mc/mc-sys.c:197: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/bus/fsl-mc/mc-sys.c:237: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17 13:44:32 +02:00
Lee Jones
337c756345 bus: fsl-mc: mc-io: Supply function names for 'fsl_create_mc_io()' and 'fsl_destroy_mc_io()'
Fixes the following W=1 kernel build warning(s):

 drivers/bus/fsl-mc/mc-io.c:53: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/bus/fsl-mc/mc-io.c:126: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Stuart Yoder <stuyoder@gmail.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210617110500.15907-1-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17 13:44:32 +02:00
Matti Vaittinen
87ee8de23c extcon: extcon-max8997: Simplify driver using devm
Simplify driver by switching to use the resource managed IRQ
requesting and resource managed work-queue initialization.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/61190cc280a63baeb05ec570282bb3677bee8e7b.1623146580.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-06-17 13:22:27 +02:00
Matti Vaittinen
610bdc0483 extcon: extcon-max8997: Fix IRQ freeing at error path
If reading MAX8997_MUIC_REG_STATUS1 fails at probe the driver exits
without freeing the requested IRQs.

Free the IRQs prior returning if reading the status fails.

Fixes: 3e34c81989 ("extcon: max8997: Avoid forcing UART path on drive probe")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/27ee4a48ee775c3f8c9d90459c18b6f2b15edc76.1623146580.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-06-17 13:22:11 +02:00
Matti Vaittinen
74047eaa22 extcon: extcon-max77693.c: Fix potential work-queue cancellation race
The extcon IRQ schedules a work item. IRQ is requested using devm while
WQ is cancelld at remove(). This mixing of devm and manual unwinding has
potential case where the WQ has been emptied (.remove() was ran) but
devm unwinding of IRQ was not yet done. It may be possible the IRQ is
triggered at this point scheduling new work item to the already flushed
queue.

According to the input documentation the input device allocated by
devm_input_allocate_device() does not need to be explicitly unregistered.
Use the new devm_work_autocancel() and remove the remove() to simplify the
code.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/cbe8205eed8276f6e6db5003cfe51b8b0d4ac966.1623146580.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-06-17 13:22:02 +02:00
Jonathan Cameron
f0000797a3 hwmon: (ntc_thermistor) Drop unused headers.
The IIO usage in this driver is purely consumer so it should only
be including linux/iio/consumer.h  Whilst here drop pm_runtime.h
as there is no runtime power management in the driver.

Found using include-what-you-use and manual inspection of the
suggestions.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210611142257.103094-1-jic23@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:47 -07:00
Robert Marko
c5679f3e70 MAINTAINERS: Add Delta DPS920AB PSU driver
Add maintainers entry for the Delta DPS920AB PSU driver.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:47 -07:00
Robert Marko
8b1d61cd47 dt-bindings: trivial-devices: Add Delta DPS920AB
Add trivial device entry for Delta DPS920AB PSU.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20210607103431.2039073-2-robert.marko@sartura.hr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:46 -07:00
Robert Marko
3efbcee8d4 hwmon: (pmbus) Add driver for Delta DPS-920AB PSU
This adds support for the Delta DPS-920AB PSU.

Only missing feature is fan control which the PSU supports.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20210607103431.2039073-1-robert.marko@sartura.hr
[groeck: Add MODULE_IMPORT_NS(PMBUS);]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:46 -07:00
Erik Rosen
bf8e0cd8d6 hwmon: (pmbus/pim4328) Add documentation for the pim4328 PMBus driver
Add documentation and index link for pim4328 PMBus driver.

Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:46 -07:00
Erik Rosen
317f9d808a hwmon: (pmbus/pim4328) Add PMBus driver for PIM4006, PIM4328 and PIM4820
Add hardware monitoring support for Flex power interface modules PIM4006,
PIM4328 and PIM4820.

Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:46 -07:00
Erik Rosen
5e86f128d9 hwmon: (pmbus) Allow phase function even if it's not on page
Allow the use of a phase function even if it does not exist on
the associated page.

Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:46 -07:00
Erik Rosen
e8e00c83a2 hwmon: (pmbus) Add support for reading direct mode coefficients
Add support for reading and decoding direct format coefficients to
the PMBus core driver. If the new flag PMBUS_USE_COEFFICIENTS_CMD
is set, the driver will use the COEFFICIENTS register together with
the information in the pmbus_sensor_attr structs to initialize
relevant coefficients for the direct mode format.

Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
[groeck: Initialize ret with -EINVAL in pmbus_init_coefficients()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:46 -07:00
Erik Rosen
dbc0860f7a hwmon: (pmbus) Add new pmbus flag NO_WRITE_PROTECT
Some PMBus chips respond with invalid data when reading the WRITE_PROTECT
register. For such chips, this flag should be set so that the PMBus core
driver doesn't use the WRITE_PROTECT command to determine its behavior.

Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:46 -07:00
Mauro Carvalho Chehab
ff53b77e1e docs: hwmon: adm1177.rst: avoid using ReSt :doc:foo markup
The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/32b0db7e79a3ed0e817213113c607a1b819e3867.1622898327.git.mchehab+huawei@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:46 -07:00
Madhava Reddy Siddareddygari
4e5418f787 hwmon: (pmbus_core) Check adapter PEC support
Currently, for Packet Error Checking (PEC) only the controller
is checked for support. This causes problems on the cisco-8000
platform where a SMBUS transaction errors are observed. This is
because PEC has to be enabled only if both controller and
adapter support it.

Added code to check PEC capability for adapter and enable it
only if both controller and adapter supports PEC.

Signed-off-by: Madhava Reddy Siddareddygari <msiddare@cisco.com>
[Upstream from SONiC https://github.com/Azure/sonic-linux-kernel/pull/215]
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20210605052700.541455-1-pmenzel@molgen.mpg.de
[groeck: Dropped unnecessary continuation line]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:46 -07:00
Ninad Malwade
6b6af85410 hwmon: (ina3221) use CVRF only for single-shot conversion
As per current logic the wait time per conversion is arouns 430ms
for 512 samples and around 860ms for 1024 samples for 3 channels
considering 140us as the bus voltage and shunt voltage sampling
conversion time.

This waiting time is a lot for the continuous mode and even for
the single shot mode. For continuous mode when moving average is
considered the waiting for CVRF bit is not required and the data
from the previous conversion is sufficuent. As mentioned in the
datasheet the conversion ready bit is provided to help coordinate
single-shot conversions, we can restrict the use to single-shot
mode only.

Also, the conversion time is for the averaged samples, the wait
time for the polling can omit the number of samples consideration.

Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Link: https://lore.kernel.org/r/1622789683-30931-1-git-send-email-nmalwade@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:46 -07:00
Guenter Roeck
1814c4e84d hwmon: (max31790) Detect and report zero fan speed
If a fan is not running or not connected, of if fan monitoring is disabled,
the fan count register returns a fixed value of 0xffe0. So far this is then
translated to a RPM value larger than 0. Since this is misleading and does
not really make much sense, report a fan RPM of 0 in this situation.

Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Václav Kubernát <kubernat@cesnet.cz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Václav Kubernát <kubernat@cesnet.cz>
Link: https://lore.kernel.org/r/20210526154022.3223012-7-linux@roeck-us.net
2021-06-17 04:21:46 -07:00
Guenter Roeck
2013607b85 hwmon: (max31790) Clear fan fault after reporting it
Fault bits in MAX31790 are sticky and have to be cleared explicitly.
A write operation into either the 'Target Duty Cycle' register or the
'Target Count' register is necessary to clear a fault.

At the same time, we can never clear cached fault status values before
reading them because the companion fault status for any given fan is
cleared as well when clearing a fault.

Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Václav Kubernát <kubernat@cesnet.cz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Václav Kubernát <kubernat@cesnet.cz>
Link: https://lore.kernel.org/r/20210526154022.3223012-6-linux@roeck-us.net
2021-06-17 04:21:46 -07:00
Guenter Roeck
148c847c9e hwmon: (max31790) Fix pwmX_enable attributes
pwmX_enable supports three possible values:

0: Fan control disabled. Duty cycle is fixed to 0%
1: Fan control enabled, pwm mode. Duty cycle is determined by
   values written into Target Duty Cycle registers.
2: Fan control enabled, rpm mode
   Duty cycle is adjusted such that fan speed matches
   the values in Target Count registers

The current code does not do this; instead, it mixes pwm control
configuration with fan speed monitoring configuration. Worse, it
reports that pwm control would be disabled (pwmX_enable==0) when
it is in fact enabled in pwm mode. Part of the problem may be that
the chip sets the "TACH input enable" bit on its own whenever the
mode bit is set to RPM mode, but that doesn't mean that "TACH input
enable" accurately reflects the pwm mode.

Fix it up and only handle pwm control with the pwmX_enable attributes.
In the documentation, clarify that disabling pwm control (pwmX_enable=0)
sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN
is set together with RPM_MODE.

While at it, only update the configuration register if the configuration
has changed, and only update the cached configuration if updating the
chip configuration was successful.

Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Václav Kubernát <kubernat@cesnet.cz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Václav Kubernát <kubernat@cesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
2021-06-17 04:21:46 -07:00
Guenter Roeck
897f633989 hwmon: (max31790) Report correct current pwm duty cycles
The MAX31790 has two sets of registers for pwm duty cycles, one to request
a duty cycle and one to read the actual current duty cycle. Both do not
have to be the same.

When reporting the pwm duty cycle to the user, the actual pwm duty cycle
from pwm duty cycle registers needs to be reported. When setting it, the
pwm target duty cycle needs to be written. Since we don't know the actual
pwm duty cycle after a target pwm duty cycle has been written, set the
valid flag to false to indicate that actual pwm duty cycle should be read
from the chip instead of using cached values.

Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Václav Kubernát <kubernat@cesnet.cz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Václav Kubernát <kubernat@ceesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://lore.kernel.org/r/20210526154022.3223012-3-linux@roeck-us.net
2021-06-17 04:21:45 -07:00
Guenter Roeck
cbbf244f05 hwmon: (max31790) Fix fan speed reporting for fan7..12
Fans 7..12 do not have their own set of configuration registers.
So far the code ignored that and read beyond the end of the configuration
register range to get the tachometer period. This resulted in more or less
random fan speed values for those fans.

The datasheet is quite vague when it comes to defining the tachometer
period for fans 7..12. Experiments confirm that the period is the same
for both fans associated with a given set of configuration registers.

Fixes: 54187ff9d7 ("hwmon: (max31790) Convert to use new hwmon registration API")
Fixes: 195a4b4298 ("hwmon: Driver for Maxim MAX31790")
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Václav Kubernát <kubernat@cesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210526154022.3223012-2-linux@roeck-us.net
2021-06-17 04:21:45 -07:00
Joe Perches
07c6621a37 hwmon: (sht4x) Fix sht4x_read_values return value
Kernel doc for sht4x_read_values() shows 0 on success, 1 on failure but
the return value on success is actually always positive as it is set to
SHT4X_RESPONSE_LENGTH by a successful call to i2c_master_recv().

Miscellanea:

o Update the kernel doc for sht4x_read_values to 0 for success or -ERRNO
o Remove incorrectly used kernel doc /** header for other _read functions
o Typo fix succesfull->successful
o Reverse a test to unindent a block and use goto unlock
o Declare cmd[SHT4X_CMD_LEN] rather than cmd[]

At least for gcc 10.2, object size is reduced a tiny bit.

$ size drivers/hwmon/sht4x.o*
   text	   data	    bss	    dec	    hex	filename
   1752	    404	    256	   2412	    96c	drivers/hwmon/sht4x.o.new
   1825	    404	    256	   2485	    9b5	drivers/hwmon/sht4x.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/60eedce497137eb34448c0c77e01ec9d9c972ad7.camel@perches.com
Reviewed by: Navin Sankar Velliangiri <navin@linumiz.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17 04:21:45 -07:00