Commit graph

153,333 commits

Author SHA1 Message Date
Tomi Valkeinen
36377357db OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv
Commit 05dd0f5308 ("OMAPDSS: DISPC: Update
Accumulator configuration for chroma plane") adds
dispc_ovl_set_accu_uv() function that sets the accu, but the function
only handles YUV and NV12 modes, and BUGs otherwise.

The patch also adds a call to the function, but unfortunately the place
of call was such that the mode could be other than YUV or NV12, thus
crashing the driver.

This patchs moves the call to a slightly later spot, at which point only
YUV and NV12 modes are handled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Chandrabhanu Mahapatra <cmahapatra@ti.com>
2012-05-22 10:59:14 +03:00
Tomi Valkeinen
3568f2a46f OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays
There is a problem related to DSS FIFO thresholds and power management
on OMAP3. It seems that when the full PM hits in, we get underflows. The
core reason is unknown, but after experiments it looks like only
particular FIFO thresholds work correctly.

This bug is related to an earlier patch, which added special FIFO
threshold configuration for OMAP3, because DSI command mode output
didn't work with the normal threshold configuration.

However, as the above work-around worked fine for other output types
also, we currently always configure thresholds in this special way on
OMAP3. In theory there should be negligible difference with this special
way and the standard way. The first paragraph explains what happens in
practice.

This patch changes the driver to use the special threshold configuration
only when the output is a manual update display on OMAP3. This does
include RFBI displays also, and although it hasn't been tested (no
boards using RFBI) I suspect the similar behaviour is present there
also, as the DISPC side should work similarly for DSI command mode and
RFBI.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Joe Woodward <jw@terrafix.co.uk>
2012-05-22 10:59:13 +03:00
Daniel Vetter
c8d4bb54c1 drm/i915: don't silently ignore sdvo mode_set failures
Unfortunately we can't abort a mode_set, but at least tell the user
that something might have gone wrong when setting the sdvo input or
output timing fails.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-22 09:30:47 +02:00
Daniel Vetter
c9a2969830 drm/i915: clarify preferred sdvo input mode code
- kill intel_sdvo->input_dtd, it's only used as a temporary variable,
  we store the preferred input mode in the adjusted mode at mode_fixup
  time.
- rename the function to make it clear what we want it to do (get the
  preferred mode) and say in a comment what it unfortunately does as a
  side-effect (set the new output timings).

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-22 09:29:02 +02:00
Daniel Vetter
6bd459df96 drm/i915: fix module unload since error_state rework
We need to remove the debugfs file. Regression introduce in

commit d54423037f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Apr 27 15:17:40 2012 +0200

    drm/i915: allow the existing error_state to be destroyed

Reported-and-Tested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-22 09:22:36 +02:00
Marek Szyprowski
0f51596bd3 Merge branch 'for-next-arm-dma' into for-linus
Conflicts:
	arch/arm/Kconfig
	arch/arm/mm/dma-mapping.c

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-05-22 08:55:43 +02:00
Laurent Pinchart
72c04af9a2 fbdev: sh_mobile_lcdc: Don't confuse line size with pitch
When using the MERAM the LCDC line size needs to be programmed with a
MERAM-specific value different than the real frame buffer pitch. Fix it.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: stable@vger.kernel.org  # for 3.4
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-21 20:59:32 -07:00
NeilBrown
1dff2b87a3 md/bitmap: record the space available for the bitmap in the superblock.
Now that bitmaps can grow and shrink it is best if we record
how much space is available.  This means that when
we reduce the size of the bitmap we won't "lose" the space
for late when we might want to increase the size of the bitmap
again.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:34 +10:00
NeilBrown
63aced6102 md/raid10: Remove extras after reshape to smaller number of devices.
When a reshape which reduced the number of devices finishes
we must remove the extra devices.

So ensure  that raid10_remove_disk won't try to keep them, and
have raid10_finish_reshape clear the 'in_sync' flag.  Then
remove_and_add_spares will be able to remove them.

Reported-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:33 +10:00
NeilBrown
da7613b8b0 md/raid5: improve removal of extra devices after reshape.
After a reshape which reduced the number of devices we need
to disconnect the extra devices.
The code for this doesn't currently handle 'replacement' devices.
It is very unlikely that such devices will be present, but it is
safest to handle them anyway.

So simplify the handling.  Just clear In_sync and leave it
to remove_and_add_spaces (which will be called soon) to do
the real works.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:33 +10:00
Yuanhan Liu
0c098220e2 md: check the return of mddev_find()
Check the return of mddev_find(), since it may fail due to out of
memeory or out of usable minor number.

The reason I chose -ENODEV instead of -ENOMEM or something else is
md_alloc() function chose that ;)

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:32 +10:00
Jonathan Brassow
4f0a5e012c MD RAID1: Further conditionalize 'fullsync'
A RAID1 device does not necessarily need a fullsync if the bitmap can be used instead.

Similar to commit d6b212f4b1 in raid5.c, if a raid1
device can be brought back (i.e. from a transient failure) it shouldn't need a
complete resync.  Provided the bitmap is not to old, it will have recorded the areas
of the disk that need recovery.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:31 +10:00
Jonathan Brassow
c32fb9e7ec DM RAID: Use md_error() in place of simply setting Faulty bit
When encountering an error while reading the superblock, call md_error.

We are currently setting the 'Faulty' bit on one of the array devices when an
error is encountered while reading the superblock of a dm-raid array.  We should
be calling md_error(), as it handles the error more completely.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:31 +10:00
Jonathan Brassow
81f382f9e0 DM RAID: Record and handle missing devices
Missing dm-raid devices should be recorded in the superblock

When specifying the devices that compose a DM RAID array, it is possible to denote
failed or missing devices with '-'s.  When this occurs, we must record this in the
superblock.  We do this by checking if the array position's data device is missing
and then forcing MD to record the superblock by setting 'MD_CHANGE_DEVS' in
'raid_resume'.  If we do not cause the superblock to be rewritten by the resume
function, it is possible for a stale superblock to be written by an out-going
in-active table (during 'raid_dtr').

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:30 +10:00
Jonathan Brassow
47525e59e4 DM RAID: Set recovery flags on resume
Properly initialize MD recovery flags when resuming device-mapper devices.

When a device-mapper device is suspended, all I/O must stop.  This is done by
calling 'md_stop_writes' and 'mddev_suspend'.  These calls in-turn manipulate
the recovery flags - including setting 'MD_RECOVERY_FROZEN'.  The DM device
may have been suspended while recovery was not yet complete, so the process
needs to pick-up where it left off.  Since 'mddev_resume' does not unset
'MD_RECOVERY_FROZEN' and set 'MD_RECOVERY_NEEDED', we must do it ourselves.
'MD_RECOVERY_NEEDED' can safely be set in 'mddev_resume', but 'MD_RECOVERY_FROZEN'
must be set outside of 'mddev_resume' due to how MD handles RAID reshaping.
(e.g.  It is possible for a user to delay reshaping a RAID5->RAID6 by purposefully
setting 'MD_RECOVERY_FROZEN'.  Clearing it in 'mddev_resume' would override the
desired behavior.)

Because 'mddev_resume' already unconditionally calls 'md_wakeup_thread(mddev->thread)'
there is no need to make this call from 'raid_resume' since it calls 'mddev_resume'.

Also clean up where  level_store calls mddev_resume() - it current
duplicates some of the funcitons of that call. - NB

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:29 +10:00
NeilBrown
30b67645fa md/raid5: Allow reshape while a bitmap is present.
We always should have allowed this.  A raid5 reshape doesn't change
the size of the bitmap, so not need to restrict it.

Also add a test to make sure we don't try to start a reshape on a
failed array.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:28 +10:00
NeilBrown
bb63a7019d md/raid10: resize bitmap when required during reshape.
If a reshape changes the size of the array, then we can now
update the bitmap to suit - so do so.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:28 +10:00
NeilBrown
a4a6125a07 md: allow array to be resized while bitmap is present.
Now that bitmaps can be resized, we can allow an array to be resized
while the bitmap is present.

This only covers resizing that involves changing the effective size
of member devices, not resizing that changes the number of devices.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:27 +10:00
NeilBrown
b81a040481 md/bitmap: make sure reshape request are reflected in superblock.
As a reshape may change the sync_size and/or chunk_size, we need
to update these whenever we write out the bitmap superblock.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:26 +10:00
NeilBrown
d60b479d17 md/bitmap: add bitmap_resize function to allow bitmap resizing.
This function will allocate the new data structures and copy
bits across from old to new, allowing for the possibility that the
chunksize has changed.

Use the same function for performing the initial allocation
of the structures.  This improves test coverage.

When bitmap_resize is used to resize an existing bitmap, it
only copies '1' bits in, not '0' bits.
So when allocating the bitmap, ensure everything is initialised
to ZERO.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:25 +10:00
NeilBrown
15702d7fb6 md/bitmap: use DIV_ROUND_UP instead of open-code
Also take the opportunity to simplify CHUNK_BLOCK_RATIO.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:25 +10:00
NeilBrown
40cffcc0e8 md/bitmap: create a 'struct bitmap_counts' substructure of 'struct bitmap'
The new "struct bitmap_counts" contains all the fields that are
related to counting the number of active writes in each bitmap chunk.

Having this separate will make it easier to change the chunksize
or overall size of a bitmap atomically.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:24 +10:00
NeilBrown
63c68268b2 md/bitmap: make bitmap bitops atomic.
This allows us to remove spinlock protection which is
more heavy-weight than simple atomics.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:23 +10:00
NeilBrown
bdfd114073 md/bitmap: make _page_attr bitops atomic.
Using e.g. set_bit instead of __set_bit and using test_and_clear_bit
allow us to remove some locking and contract other locked ranges.

It is rare that we set or clear a lot of these bits, so gain should
outweigh any cost.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:22 +10:00
NeilBrown
fae7d326cd md/bitmap: merge bitmap_file_unmap and bitmap_file_put.
There functions really do one thing together: release the
'bitmap_storage'.  So make them just one function.

Since we removed the locking (previous patch), we don't need to zero
any fields before freeing them, so it all becomes a bit simpler.


Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:21 +10:00
NeilBrown
62f82faace md/bitmap: remove async freeing of bitmap file.
There is no real value in freeing things the moment there is an error.
It is just as good to free the bitmap file and pages when the bitmap
is explicitly removed (and replaced?) or at shutdown.

With this gone, the bitmap will only disappear when the array is
quiescent, so we can remove some locking.

As the 'filemap' doesn't disappear now, include extra checks before
trying to write any of it out.
Also remove the check for "has it disappeared" in
bitmap_daemon_write().


Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:21 +10:00
NeilBrown
7466712347 md/bitmap: convert some spin_lock_irqsave to spin_lock_irq
All of these sites can only be called from process context with
irqs enabled, so using irqsave/irqrestore just adds noise.
Remove it.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:19 +10:00
NeilBrown
b405fe91e5 md/bitmap: use set_bit, test_bit, etc for operation on bitmap->flags.
We currently use '&' and '|' which isn't the norm in the kernel
and doesn't allow easy atomicity.
So change to bit numbers and {set,clear,test}_bit.
This allows us to remove a spinlock/unlock (which was dubious anyway)
and some other simplifications.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:15 +10:00
NeilBrown
84e923453e md/bitmap: remove single-bit manipulation on sb->state
Just do single-bit manipulations on bitmap->flags and copy whole
value between that and sb->state.

This will allow next patch which changes how bit manipulations are
performed on bitmap->flags.

This does result in BITMAP_STALE not being set in sb by
bitmap_read_sb, however as the setting is determined by other
information in the 'sb' we do not lose information this way.
Normally, bitmap_load will be called shortly which will clear
BITMAP_STALE anyway.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:14 +10:00
NeilBrown
edbb79df67 md/bitmap: remove bitmap_mask_state
This function isn't really needed.  It sets or clears a flag in both
bitmap->flags and sb->state.
However both times it is called, bitmap_update_sb is called soon
afterwards which copies bitmap->flags to sb->state.
So just make changes to bitmap->flags, and open-code those rather than
hiding in a function.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:13 +10:00
NeilBrown
bc9891a885 md/bitmap: move storage allocation from bitmap_load to bitmap_create.
We should allocate memory for the storage-bitmap at create-time, not
load time.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:12 +10:00
NeilBrown
d1244cb062 md/bitmap: separate bitmap file allocation to its own function.
This will allow allocation before swapping in a new bitmap.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:12 +10:00
NeilBrown
9b1215c102 md/bitmap: store bytes in file rather than just in last page.
This number is more generally useful, and bytes-in-last-page is
easily extracted from it.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:11 +10:00
NeilBrown
1ec885cdd0 md/bitmap: move some fields of 'struct bitmap' into a 'storage' substruct.
This new 'struct bitmap_storage' reflects the external storage of the
bitmap.
Having this clearly defined will make it easier to change the storage
used while the array is active.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:10 +10:00
NeilBrown
d189122d4b md/bitmap: change *_page_attr() to take a page number, not a page.
Most often we have the page number, not the page.  And that is what
the  *_page_attr() functions really want.  So change the arguments to
take that number.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:09 +10:00
NeilBrown
27581e5ae0 md/bitmap: centralise allocation of bitmap file pages.
Instead of allocating pages in read_sb_page, read_page and
bitmap_read_sb, allocate them all in bitmap_init_from disk.

Also replace the hack of calling "attach_page_buffers(page, NULL)" to
ensure that free_buffer() won't complain, by putting a test for
PagePrivate in free_buffer().

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:08 +10:00
NeilBrown
ef99bf480d md/bitmap: allow a bitmap with no backing storage.
An md bitmap comprises two parts
 - internal counting of active writes per 'chunk'.
 - external storage of whether there are any active writes on
   each chunk

The second requires the first, but the first doesn't require the
second.

Not having backing storage means that the bitmap cannot expedite
resync after a crash, but it still allows us to expedite the recovery
of a recently-removed device.

So: allow a bitmap to exist even if there is no backing device.
In that case we default to 128M chunks.

A particular value of this is that we can remove and re-add a bitmap
(possibly of a different granularity) on a degraded array, and not
lose the information needed to fast-recover the missing device.

We don't actually activate these bitmaps yet - that will come
in a later patch.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:08 +10:00
NeilBrown
6409bb05a9 md/bitmap: add new 'space' attribute for bitmaps.
If we are to allow bitmaps to be resized when the array is resized,
we need to know how much space there is.

So create an attribute to store this information and set appropriate
defaults.

It can be set more precisely via sysfs, or future metadata extensions
may allow it to be recorded.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:07 +10:00
NeilBrown
bf07bb7d5b md/bitmap: disentangle two different 'pending' flags.
There are two different 'pending' concepts in the handling of the
write intent bitmap.

Firstly, a 'page' from the bitmap (which container PAGE_SIZE*8 bits)
may have changes (bits cleared) that should be written in due course.
There is no hurry for these and the page will transition from
PENDING to NEEDWRITE and will then be written, though if it ever
becomes DIRTY it will be written much sooner and PENDING will be
cleared.

Secondly, a page of counters - which contains PAGE_SIZE/2 counters, one
for each bit, can usefully have a 'pending' flag which indicates if
any of the counters are low (2 or 1) and ready to be processed by
bitmap_daemon_work().  If this flag is clear we can skip the whole
page.

These two concepts are currently combined in the bitmap-file flag.
This causes a tighter connection between the counters and the bitmap
file than I would like - as I want to add some flexibility to the
bitmap file.

So introduce a new flag with the page-of-counters, and rewrite
bitmap_daemon_work() so that it handles the two different 'pending'
concepts separately.

This also allows us to clear BITMAP_PAGE_PENDING when we write out
a dirty page, which may occasionally reduce the number of times we
write a page.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:06 +10:00
Shaohua Li
bc0934f047 raid5: support sync request
REQ_SYNC is ignored in current raid5 code. Block layer does use it to do
policy,
for example ioscheduler. This patch adds it.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:05 +10:00
Shaohua Li
cceeca43b5 raid5: remove unused variables
The two variables are useless.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:04 +10:00
majianpeng
5fdd2cf826 md/raid10: Fix memleak in r10buf_pool_alloc
If the allocation of rep1_bio fails, we currently don't free the 'bio'
of the same dev.

Reported by kmemleak.

Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:03 +10:00
majianpeng
da8840a747 md/raid1: allow fix_read_error to read from recovering device.
When attempting to fix a read error, it is acceptable to read from a
device that is recovering, provided the recovery has got past the
place we are reading from.  This makes the test for "can we read from
here" the same as the test in read_balance.

Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:03 +10:00
NeilBrown
4fa2f32768 md: move freeing of badblocks.page into md_rdev_clear
This ensures that it is always freed - there were case where
we failed to free the page.

Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:01 +10:00
NeilBrown
545c87957f md: dm-raid should call helper function to clear rdev.
dm-raid currently open-codes the freeing of some members of
and rdev.  It is more maintainable to have it call common code
from md.c which does this for all call-sites.

So remove free_disk_sb to md_rdev_clear, export it, and use it in
dm-raid.c

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:54:30 +10:00
NeilBrown
3ea7daa5d7 md/raid10: add reshape support
A 'near' or 'offset' lay RAID10 array can be reshaped to a different
'near' or 'offset' layout, a different chunk size, and a different
number of devices.
However the number of copies cannot change.

Unlike RAID5/6, we do not support having user-space backup data that
is being relocated during a 'critical section'.  Rather, the
data_offset of each device must change so that when writing any block
to a new location, it will not over-write any data that is still
'live'.

This means that RAID10 reshape is not supportable on v0.90 metadata.

The different between the old data_offset and the new_offset must be
at least the larger of the chunksize multiplied by offset copies of
each of the old and new layout. (for 'near' mode, offset_copies == 1).

A larger difference of around 64M seems useful for in-place reshapes
as more data can be moved between metadata updates.
Very large differences (e.g. 512M) seem to slow the process down due
to lots of long seeks (on oldish consumer graded devices at least).

Metadata needs to be updated whenever the place we are about to write
to is considered - by the current metadata - to still contain data in
the old layout.

[unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>]

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:53:47 +10:00
Linus Torvalds
99262a3daf Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuv35AAoJENkgDmzRrbjxUx4P/0uc+0oNnZv11vYQsqHuhURa
 zMlsVdlXGVkvPqQiLY0QkrK5LcO6KiSnSk8vEnOYFIPjL4wNqL/4RRRLnTAJwmE+
 lsrL9DblI8Ira/EZRv7d2L12QrP+F2ZGKOZr67uVxSaxH71fUqtiJ0jqA/I8AYH7
 /V7+DgdIB1DD28Ya/JEFEUi41F08A6MU10hpaQWy9kXv09gCc9apgvH7/S3s9DaQ
 G640YWkoKZAx/OFBb8XFvpu9LqZcVl02Nl8goMZOKnMctC4iU3km7HeVjfwCgLjO
 AdA5spLMhDkS/xrpI0mSQ/wT0k0+sSYW5vEdW9N4XLZza0NgH9GfU4RtEuK85Slj
 7bPviZOcpjtt0sGi4wXCaVjZyHROX6tyRvTMUAIj3D0oJglb5T9D3MCvQnadILb0
 I0+7gk3d9rHqkO6CmjNaZG9IwR9NpFkbuolcFQuEaZoUMoKd2pYNQyxpbFGl+jCl
 7ViFHAy+fydNqDoETKincld4A43KWxOV7jyEJd7hloKcCixsqI7ZdPS7X8amec72
 a0hfNgMJzarZkTgo61Hair/d+vKGRJPgEdF1Yq76SDhYKD1TeWeDjmboctsiMjqe
 f5M4C6IdNJj9cDIlCxMk+3bX250oy7KG77v7Ux0/7nvtSWVa3yEMowD57hnn1But
 0gNC8bjXDHRsho90rDRN
 =Kj9v
 -----END PGP SIGNATURE-----

Merge tag 'virtio-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus

Pull virtio updates from Rusty Russell.

* tag 'virtio-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio: fix typo in comment
  virtio-mmio: Devices parameter parsing
  virtio_blk: Drop unused request tracking list
  virtio-blk: Fix hot-unplug race in remove method
  virtio: Use ida to allocate virtio index
  virtio: balloon: separate out common code between remove and freeze functions
  virtio: balloon: drop restore_common()
  9p: disconnect channel when PCI device is removed
  virtio: update documentation to v0.9.5 of spec
2012-05-21 20:20:23 -07:00
Pawel Moll
81a054ce0b virtio-mmio: Devices parameter parsing
This patch adds an option to instantiate guest virtio-mmio devices
basing on a kernel command line (or module) parameter, for example:

	virtio_mmio.devices=0x100@0x100b0000:48

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-22 12:16:15 +09:30
Asias He
f65ca1dc6a virtio_blk: Drop unused request tracking list
Benchmark shows small performance improvement on fusion io device.

Before:
  seq-read : io=1,024MB, bw=19,982KB/s, iops=39,964, runt= 52475msec
  seq-write: io=1,024MB, bw=20,321KB/s, iops=40,641, runt= 51601msec
  rnd-read : io=1,024MB, bw=15,404KB/s, iops=30,808, runt= 68070msec
  rnd-write: io=1,024MB, bw=14,776KB/s, iops=29,552, runt= 70963msec

After:
  seq-read : io=1,024MB, bw=20,343KB/s, iops=40,685, runt= 51546msec
  seq-write: io=1,024MB, bw=20,803KB/s, iops=41,606, runt= 50404msec
  rnd-read : io=1,024MB, bw=16,221KB/s, iops=32,442, runt= 64642msec
  rnd-write: io=1,024MB, bw=15,199KB/s, iops=30,397, runt= 68991msec

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-22 12:16:14 +09:30
Asias He
b79d866c8b virtio-blk: Fix hot-unplug race in remove method
If we reset the virtio-blk device before the requests already dispatched
to the virtio-blk driver from the block layer are finised, we will stuck
in blk_cleanup_queue() and the remove will fail.

blk_cleanup_queue() calls blk_drain_queue() to drain all requests queued
before DEAD marking. However it will never success if the device is
already stopped. We'll have q->in_flight[] > 0, so the drain will not
finish.

How to reproduce the race:
1. hot-plug a virtio-blk device
2. keep reading/writing the device in guest
3. hot-unplug while the device is busy serving I/O

Test:
~1000 rounds of hot-plug/hot-unplug test passed with this patch.

Changes in v3:
- Drop blk_abort_queue and blk_abort_request
- Use __blk_end_request_all to complete request dispatched to driver

Changes in v2:
- Drop req_in_flight
- Use virtqueue_detach_unused_buf to get request dispatched to driver

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-22 12:16:13 +09:30