Commit graph

153,333 commits

Author SHA1 Message Date
Eugeni Dodonov
69e94b7e09 drm/i915: add WM_LINETIME registers
Watermark line time registers for display low power watermark.

v2: improve bit names as suggested by Chris Wilson

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:04:04 +02:00
Eugeni Dodonov
4dffc4043a drm/i915: add WRPLL clocks
The WR PLL can drive the DDI ports at fixed frequencies for HDMI, DVI, DP
and FDI.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:04:04 +02:00
Eugeni Dodonov
90e8d31c53 drm/i915: add LCPLL control registers
Those are used to control the display core clock.

v2: change the enable bit setting, spotted by Rodrigo Vivi.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:04:04 +02:00
Eugeni Dodonov
ccf1c867ce drm/i915: add SSC offsets for SBI access
Different registers are identified by their target id and offset. To
simplify their programming, they are called as <RegisterName><TargetId>.
For example, SSCCTL register accessed through SBI at target id 6 and
offset 0c is called SBI_SSCCTL6.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:04:03 +02:00
Eugeni Dodonov
fec9181ca4 drm/i915: add port clock selection support for HSW
Multiple clocks can drive different outputs.

v2: use the port enums to access individual ports

v1 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:04:03 +02:00
Eugeni Dodonov
e93ea06aa0 drm/i915: add S PLL control
This PLL control can drive DDI ports at desired frequencies for
DisplayPort and FDI connections.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:04:02 +02:00
Eugeni Dodonov
52f025efa9 drm/i915: add PIXCLK_GATE register
Pixel clock gating control for Lynx point.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:04:02 +02:00
Eugeni Dodonov
7501a4d846 drm/i915: add SBI registers
Those are responsible for the Sideband Interface programming.

v2: rename SBI bits to better reflect their meaning

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:04:01 +02:00
Eugeni Dodonov
bb879a44ff drm/i915: add definition of DDI buffer translations regs
Those registers are used to train DDI buffer translations for each link
type.

v2: access each port registers through the DDI_BUF_TRANS macro

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:04:01 +02:00
Eugeni Dodonov
03f896a1ae drm/i915: add definitions for DDI_BUF_CTL registers
There is one instance of those registers for each DDI port.

v2: access registers via the DDI_BUF_CTL() macro

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:04:01 +02:00
Eugeni Dodonov
e411b2c116 drm/i915: add DP_TP_STATUS registers
There is one set of those registers for each port.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:04:00 +02:00
Eugeni Dodonov
0e87f66798 drm/i915: add DP_TP_CTL registers
This is one set of those registers for each pipe.

v2: use port enum to access individual registers

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:04:00 +02:00
Eugeni Dodonov
e7e104c378 drm/i915: add DDI registers
There is one set of such registers for each pipe (A/B/C/EDP).

v2: update to use DDI PORTS enum

v1 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:03:59 +02:00
Eugeni Dodonov
2b13952200 drm/i915: add enumeration for DDI ports
There are 5 DDI ports on Haswell. Port A is always enabled, and is the one
connected to eDP, and Port E is the one that can be connected to the PCH
using FDI protocol.  Ports B, C, D and E can be used for digital outputs.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:03:59 +02:00
Eugeni Dodonov
9eb3a75276 drm/i915: add support for power wells
This defines the registers used by different power wells.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:03:58 +02:00
Eugeni Dodonov
eb877ebfd3 drm/i915: add support for LynxPoint PCH
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:03:58 +02:00
Eugeni Dodonov
4cae9ae052 drm/i915: add Haswell devices and their PCI IDs
This adds product definitions for desktop, mobile and server boards.

v2: split into a separate patch, add .has_pch_split feature.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:03:58 +02:00
Eugeni Dodonov
7e508a275b drm/i915: transform HAS_PCH_SPLIT in a feature check
The macro is becoming too complex and with VLV upon us it can lead to
confusion. So transforming this into a feature check instead.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
[danvet: fixed conflict with is_valleyview addition.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-09 18:03:57 +02:00
Vasanthakumar Thiagarajan
d97c121bb2 ath6kl: Fix 4-way handshake failure in AP and P2P GO mode
RSN capability field of RSN IE which is generated (which is what really
advertised in beacon/probe response) differs from the one generated in
wpa_supplicant. This inconsistency in rsn IE results in 4-way handshake
failure. To fix this, configure rsn capability used in wpa_supplicant
in firmware using a new wmi command, WMI_SET_IE_CMDID. There is a bit
(ATH6KL_FW_CAPABILITY_RSN_CAP_OVERRIDE) in fw_capabilities to advertise
this support to driver.

Signed-off-by: Subramania Sharma <sharmat@qca.qualcomm.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-09 18:33:07 +03:00
Vasanthakumar Thiagarajan
df90b36940 ath6kl: Configure htcap in fw based on the channel type in AP mode
This patch disables HT in start_ap if the type of the channel on
which the AP mode is going to be operating is non-HT. HT is enabled
with default ht cap setting if the operating channel is going to be
11n.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-09 18:25:56 +03:00
Vasanthakumar Thiagarajan
bed56e313a ath6kl: Don't advertise HT40 support in 2.4 Ghz
HT40 is not supported in 2.4Ghz.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-09 18:25:56 +03:00
Vasanthakumar Thiagarajan
1e8d13b0ac ath6kl: Fix target assert in p2p bringup with multi vif
Using interface 0 for p2p causes target assert. This is because
interface 0 is always initialized to non-p2p operations. Fix this
issue by initializing all the interfaces for p2p when fw is capable
of dynamic interface switching. When fw is not capable of dynamic
switching, make sure p2p is not brought up on interface which is
not initialized for this purpose.

Reported-by: Naveen Singh navesing@qca.qualcomm.com
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-09 17:49:43 +03:00
Laurent Pinchart
ed0ee0ce0a [media] uvcvideo: Fix race-related crash in uvc_video_clock_update()
The driver frees the clock samples buffer before stopping the video
buffers queue. If a DQBUF call arrives in-between,
uvc_video_clock_update() will be called with a NULL clock samples
buffer, leading to a crash. This occurs very frequently when using the
webcam with the flash browser plugin.

Move clock initialization/cleanup to uvc_video_enable() in order to free
the clock samples buffer after the queue is stopped. Make sure the clock
is reset at resume time to avoid miscalculating timestamps.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-09 10:15:28 -03:00
Hans Petter Selasky
c065f5b4ee [media] dvb_frontend: fix compiler warning
has_get_frontend() should return a boolean, not a pointer.

Signed-off-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-09 09:42:11 -03:00
Malcolm Priestley
4da2876614 [media] it913x: fix firmware loading errors
On some systems the device does not respond or give obscure values after cold,
warm or firmware reboot.

This patch retries to get chip version and type 5 times. If it
fails it applies chip version 0x1 and type 0x9135.

This patch does not fix warm cycle problems from other operating
systems and indeed the reverse applies. Users should power off cold boot.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-09 09:42:10 -03:00
Hans Verkuil
bc169e35e3 [media] ivtv: Fix AUDIO_(BILINGUAL_)CHANNEL_SELECT regression
When I converted ivtv to the new decoder API I introduced a regression in the
support of the old channel select API.

Thanks to Martin Dauskardt for reporting this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-09 09:41:54 -03:00
Chris Rankin
556a0442e0 [media] dvb_frontend: regression fix: userspace ABI broken for xine
The commit e399ce77e6 has broken the DVB ABI for xine:

The problem is that xine is expecting every event after a successful
FE_SET_FRONTEND ioctl to have a non-zero frequency parameter, regardless
of whether the tuning process has LOCKed yet. What used to happen is
that the events inherited the initial tuning parameters from the
FE_SET_FRONTEND call. However, the fepriv->parameters_out struct is now
not initialised until the status contains the FE_HAS_LOCK bit.

You might argue that this behaviour is intentional, except that if an
application other than xine uses the DVB adapter and manages to set the
parameters_out.frequency field to something other than zero, then xine
no longer has any problems until either the adapter is replugged or the
kernel modules reloaded. This can only mean that the
fepriv->parameters_out struct still contains the (stale) tuning
information from the previous application.

Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Cc: stable@kernel.org # for kernel version 3.3
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-09 09:41:34 -03:00
Axel Lin
fe2af11c22 firewire: use module_pci_driver
This patch converts the drivers in drivers/firewire/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-09 14:23:37 +02:00
Mark Brown
c172708d38 regulator: core: Use a struct to pass in regulator runtime configuration
Rather than adding new arguments to regulator_register() every time we
want to add a new bit of dynamic information at runtime change the function
to take these via a struct. By doing this we avoid needing to do further
changes like the recent addition of device tree support which required each
regulator driver to be updated to take an additional parameter.

The regulator_desc which should (mostly) be static data is still passed
separately as most drivers are able to configure this statically at build
time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 12:37:09 +01:00
Mark Brown
1474e4dbca Merge branch 'regulator-register' into regulator-drivers 2012-04-09 12:30:21 +01:00
Hans de Goede
3f1bfef8e7 pwc: Add support for control events
Since the pwc driver already uses v4l2-device, v4l2-fh, and the control
framework, all that is needed is hooking up event subscription.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-09 08:28:33 -03:00
Shimoda, Yoshihiro
bbb4ce50f3 serial: sh-sci: modify sci_break_ctl()
SCIF modules which have SCSPTR can output the break signal. Now that we
have a way of determining port features/capabilities, add trivial break
control via SCSPTR support. Tested on sh7757lcr.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-09 17:39:34 +09:00
Horia Geanta
511d63cb19 crypto: talitos - properly lock access to global talitos registers
Access to global talitos registers must be protected for the case when
affinities are configured such that primary and secondary talitos irqs
run on different cpus.

Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-04-09 15:13:40 +08:00
Asai Thambi S P
95fea2f1d9 mtip32xx: dump tagmap on failure
Dump tagmap on failure, instead of individual tags.

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09 08:35:39 +02:00
Asai Thambi S P
c74b0f586f mtip32xx: fix handling of commands in various scenarios
* If a ncq  command time out and a non-ncq command is active, skip restart port
* Queue(pause) ncq commands during operations spanning more than one non-ncq commands - secure erase, download microcode
* When a non-ncq command is active, allow incoming non-ncq commands to wait instead of failing back
* Changed timeout for download microcode and smart commands
* If the device in write protect mode, fail all writes (do not send to device)
* Set maximum retries to 2

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09 08:35:39 +02:00
Asai Thambi S P
8a857a880b mtip32xx: Shorten macro names
Shortened macros used to represent mtip_port->flags and dd->dd_flag

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09 08:35:38 +02:00
Asai Thambi S P
8182b49528 mtip32xx: misc changes
* Handle the interrupt completion of polled internal commands
* Do not check remove pending flag for standby command
* On rebuild failure,
    - set corresponding bit dd_flag
    - do not send standby command
* Free ida index in remove path

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09 08:35:38 +02:00
Asai Thambi S P
f65872177d mtip32xx: Add new sysfs entry 'status'
* Add support for detecting the following device status
        - write protect
        - over temp (thermal shutdown)
* Add new sysfs entry 'status', possible values - online, write_protect, thermal_shutdown
* Add new file 'sysfs-block-rssd' to document ABI (Reported-by: Greg Kroah-Hartman)

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09 08:35:38 +02:00
Asai Thambi S P
dad40f16ff mtip32xx: make setting comp_time as common
Moved setting completion time into mtip_issue_ncq_command()

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09 08:35:38 +02:00
Asai Thambi S P
45038367c2 mtip32xx: Add new bitwise flag 'dd_flag'
* Merged the following flags into one variable 'dd_flag':
        * drv_cleanup_done
        * resumeflag
* Added the following flags into 'dd_flag'
        * remove pending
        * init done
* Removed 'ftlrebuildflag' (similar flag is already part of mti_port->flags)

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-09 08:35:38 +02:00
Al Viro
c65390f4dd fix breakage in mtdchar_open(), sanitize failure exits
simple_release_fs() should be only done on failure there.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-09 01:38:55 -04:00
Jiri Kosina
e75d660672 Merge branch 'master' into for-next
Merge with latest Linus' tree, as I have incoming patches
that fix code that is newer than current HEAD of for-next.

Conflicts:
	drivers/net/ethernet/realtek/r8169.c
2012-04-08 21:48:52 +02:00
Greg Kroah-Hartman
e3fa252a0e Merge 3.2-rc1 into usb-linus
This is needed to catch the resume bug that was bothering lots of us from
testing some XHCI bug fixes in the suspend/resume path.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-08 08:26:51 -07:00
Manuel Lauss
9301973455 fbdev: fix au1*fb builds
Commit 1c16697bf9
("drivers/video/au*fb.c: use devm_ functions) introduced 2 build failures
in the au1100fb and au1200fb drivers, fix them.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-04-08 14:27:09 +00:00
Ondrej Zary
ef798d0207 kyrofb: fix on x86_64
kyrofb is completely broken on x86_64 because the registers are defined as
unsigned long. Change them to u32 to make the driver work.
Tested with Hercules 3D Prophet 4000XT.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-04-08 14:27:08 +00:00
Grant Likely
f141ed65f2 gpio: Move DT support code into drivers/gpio
The code in drivers/of/gpio.c isn't shared by any other subsystem since it
is all gpiolib specific.  drivers/gpio is a better place to maintain these
functions.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
2012-04-07 14:35:28 -06:00
Axel Lin
93baa65fe5 gpio: Convert drivers to use module_pci_driver()
This patch converts the drivers in drivers/gpio/* to use
module_pci_driver() macro which makes the code smaller and a bit
simpler by having less boilerplate.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-07 14:30:35 -06:00
Linus Torvalds
f4e52e7ffd regmap: A couple of small fixes for 3.4
Two more small fixes:
 - Now we have users for it that aren't running Android it turns out that
   regcache_sync_region() is much more useful to drivers if it's exported
   for use by modules.  Who knew?
 - Make sure we don't divide by zero when doing debugfs dumps of rbtrees,
   not visible up until now because everything was providing at least
   some cache on startup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPfMvJAAoJEBus8iNuMP3d43YQAI8IJqPoAqK2eKjQlYNRzP3O
 hWgA6oU56Yqg0PZKKTbWKkul2j9onRV7UrCsXrKo9gCVFNAROkMh9q8uZxzf7yl1
 AlOsoKDH/ijYhuAkbLri5tWc8vw5SZS/rSXx6BnVAIPgDjaCEoJcd6swJTfieuyz
 slN+y3Y3FDk7zIefkcAlMpUR5ks+jAHOHhk/Kwe5+xP3xk/09acuiNogpPYRH4Fp
 2tV9Qr9cSrDKIX8eLkR/AkRkmESMIzkpEopQY4vpYO+GiEwyKGdGjMTqkgjQ7PSk
 jL1lp36CAeVuR7Bp3OFT7bilXZKTrkOiwkC2ctFmyjYK+VO4HWBeOeMmoZvTBRCO
 +RXAZVN0zFyxPuH6ZJqOuQpCyoY0JBZPZulwRrXGsQpQOoITuEt9yJpLfDSj6hYd
 Pj8NLHT10n8DBnLk8nXuxT0mNgGDBTNOVCpVblmfm2CLcEGOQsAzWCgCKjkehCUJ
 O3I/3ZHzs1tvCZNcmt5HH8d8D+iMtkOS8bSHTHvZ2ADjSXWGPgXYlUwObYH6kV9N
 nMYi8Q6r8skkESL1jaE12XMZxGm07emIyUh+9hfM0lLGEC/cPff2gXwKhtZMDQfE
 XELx3e/EbyqNsNqFd71v9XpGyJA9si7JvPY/ZSei/CTqToIEAsX/BwGMKGAWnrNy
 ARlp9oaM6BOOg+i2Ddrg
 =qm1Q
 -----END PGP SIGNATURE-----

Merge tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull two more small regmap fixes from Mark Brown:
 - Now we have users for it that aren't running Android it turns out
   that regcache_sync_region() is much more useful to drivers if it's
   exported for use by modules.  Who knew?
 - Make sure we don't divide by zero when doing debugfs dumps of
   rbtrees, not visible up until now because everything was providing at
   least some cache on startup.

* tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: prevent division by zero in rbtree_show
  regmap: Export regcache_sync_region()
2012-04-07 09:56:00 -07:00
Linus Torvalds
664481ed45 SuperH updates for 3.4-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAk99uBgACgkQGkmNcg7/o7hglwCgqi6CE7i5gyneNYBn2ocRps4O
 y1UAoMSIscO6YWcHPuxOiNBbJYUy/jMI
 =SEO8
 -----END PGP SIGNATURE-----

Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: fix clock-sh7757 for the latest sh_mobile_sdhi driver
  serial: sh-sci: use serial_port_in/out vs sci_in/out.
  sh: vsyscall: Fix up .eh_frame generation.
  sh: dma: Fix up device attribute mismatch from sysdev fallout.
  sh: dwarf unwinder depends on SHcompact.
  sh: fix up fallout from system.h disintegration.
2012-04-07 09:52:46 -07:00
David S. Miller
2f6f9d6fe5 fealnx: Remove unused local label 'out' in netdev_open().
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-07 09:02:32 -04:00