Commit graph

153,333 commits

Author SHA1 Message Date
Florian Tobias Schandinat
2c0fad8e90 Merge pull request #1 from bernieplug/fbdev-next
udlfb patches for fbdev-next
2012-03-05 23:54:54 -08:00
Haojian Zhuang
8bec2e9e2e rtc: sa1100: add OF support
Add OF support on rtc-sa1100.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-03-06 15:03:31 +08:00
Kevin Liu
adab30d738 Input: max8925_onkey - allow to be used as a wakeup source
Implement suspend and resume methods to set up devices as wakeup source.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-05 22:32:54 -08:00
Tom Herbert
5cb917bc4f tg3: Fix to use multi queue BQL interfaces
Fix tg3 to use BQL multi queue related netdev interfaces since the
device supports multi queue.

Signed-off-by: Tom Herbert <therbert@google.com>
Reported-by: Christoph Lameter <cl@gentwo.org>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-06 01:19:08 -05:00
Junchang Wang
9184a22701 8139too: Add 64bit statistics
Switch to use ndo_get_stats64 to get 64bit statistics.
Two sync entries are used (one for Rx and one for Tx).

Signed-off-by: Junchang Wang <junchangwang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-06 00:04:16 -05:00
David S. Miller
f6a1ad4295 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/vmxnet3/vmxnet3_drv.c

Small vmxnet3 conflict with header size bug fix in 'net'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-05 21:16:26 -05:00
James M. Leddy
0a4eaeeb99 Bluetooth: btusb: add support for BCM20702A0 [0a5c:21e6]
Add another vendor specific ID for BCM20702A0.  This has been tested and
works on hardware with this device.

output of usb-devices:
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21e6 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=D0DF9AFB227B
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: James M. Leddy <james.leddy@canonical.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-03-06 02:42:16 +02:00
Linus Torvalds
98e990afa6 USB: revert a powerpc EHCI patch
There is just one patch in here, a revert of a powerpc EHCI driver
 patch that was reported to cause problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk9VTXkACgkQMUfUDdst+ylV+wCg0LCngetBRR4J7Tu+fxfIBS00
 z6YAni9fZFigFsapZqiypbSVrZ6FARQs
 =g7Br
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

USB: revert a powerpc EHCI patch

There is just one patch in here, a revert of a powerpc EHCI driver
patch that was reported to cause problems.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* tag 'usb-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "powerpc/usb: fix issue of CPU halt when missing USB PHY clock"
2012-03-05 16:10:44 -08:00
Linus Torvalds
75d7b398b7 tty: build fix for 3.3-rc6
This contains one build fix for the powerpc udbg driver that was reported.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk9VTK0ACgkQMUfUDdst+ykAGACeLDYE9U586NNUAGcHALtb6AtT
 R1IAoK4NgsUvzxkp8XOlUYUar1DulcZB
 =0xfn
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

tty: build fix for 3.3-rc6

This contains one build fix for the powerpc udbg driver that was reported.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* tag 'tty-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty/powerpc: early udbg consoles can't be modules
2012-03-05 16:10:27 -08:00
Linus Torvalds
a2e5f13ce8 3 fixes for md in 3.3-rc
2 relate to the recently added drive replacement.
 
 One causes read error in RAID10 to sometimes be retried indefinitely.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIVAwUAT1VI1znsnt1WYoG5AQK47Q//d51y5QCpABFNUcgIM626zJXlBWFUSmzU
 wFOGXh5emN6/TWguzkiZwrvcspDmXMzz1zmJtGWixYb2jBpn2MHEN4uNz3Vq68w+
 IYk/dJg/CG4+lzX+6IjiHOb3+TASRx94QZHJASx68vypqniAyikshqcbUeZBMTB0
 Fu+sKqsOGYmwQfe6/vtRPVXY7DYK2dFDBRMFpmOl+o4Y2XxmmWzMw4Dg1RIEdtFS
 Jo9GwLHTnlw2xoc0XooufeT0Q2KOpqi9T8L6Nj0ORwpgsFqgtZ/kIOoGU6qOpSri
 ofLTrobVKMpjFtmiYVOp9TaBlPnd/TNX3E4WPLGNsAwYuRUFjq8evmJKjG+pOdeB
 3ArxRKRJCaI2jnVhH+NpT7i/tpkEg/8a/BoOAihX+hM/8QkmsWluaRBOGMhpuuuc
 1baPVTusi/zijO9cM8RGIXaQj5UG4s3LUpCIOIYdDyxsfmAH5KN1F2EPrU4NMME2
 96THSshIZLkgAg5ICwtva0qoHlBlEclAlVAzEomT7R9KwHojEB1xUiyMmaIdMFoy
 JjGFAMp2E5+KBKZ1eYEHjthPWCb+nZ3eYHUh0DOnEt4kASCXnn45GJREQkpkNIR/
 HhDTS8vI743unKnbCtYFMxiw/9OXZbMkdoZhobg7lxcpoQlWJ+5ziOtACl0h0Kv8
 +ET+Kp3W8K4=
 =93ms
 -----END PGP SIGNATURE-----

Merge tag 'md-3.3-fixes' of git://neil.brown.name/md

Pull md fixes from Neil Brown:
 "Three fixes for md in 3.3-rc: Two relate to the recently added drive
  replacement.  One fixes the problem where a read error in RAID10 would
  sometimes be retried indefinitely."

* tag 'md-3.3-fixes' of git://neil.brown.name/md:
  md/raid10: fix assembling of arrays with replacement devices.
  md/raid10: fix handling of error on last working device in array.
  md/raid1: fix buglet in md_raid1_contested.
2012-03-05 16:01:25 -08:00
Linus Torvalds
3e85fb9cd4 Merge branch 'akpm' (Andrew's patch bomb)
Merge the emailed seties of 19 patches from Andrew Morton

* akpm:
  rapidio/tsi721: fix queue wrapping bug in inbound doorbell handler
  memcg: fix mapcount check in move charge code for anonymous page
  mm: thp: fix BUG on mm->nr_ptes
  alpha: fix 32/64-bit bug in futex support
  memcg: fix GPF when cgroup removal races with last exit
  debugobjects: Fix selftest for static warnings
  floppy/scsi: fix setting of BIO flags
  memcg: fix deadlock by inverting lrucare nesting
  drivers/rtc/rtc-r9701.c: fix crash in r9701_remove()
  c2port: class_create() returns an ERR_PTR
  pps: class_create() returns an ERR_PTR, not NULL
  hung_task: fix the broken rcu_lock_break() logic
  vfork: kill PF_STARTING
  coredump_wait: don't call complete_vfork_done()
  vfork: make it killable
  vfork: introduce complete_vfork_done()
  aio: wake up waiters when freeing unused kiocbs
  kprobes: return proper error code from register_kprobe()
  kmsg_dump: don't run on non-error paths by default
2012-03-05 15:50:25 -08:00
Alexandre Bounine
b24823e61b rapidio/tsi721: fix queue wrapping bug in inbound doorbell handler
Fix a bug that causes a kernel panic when the number of received doorbells
is larger than number of entries in the inbound doorbell queue (current
default value = 512).

Another possible indication for this bug is large number of spurious
doorbells reported by tsi721 driver after reaching the queue size maximum.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Chul Kim <chul.kim@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>		[3.2.x+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-05 15:49:43 -08:00
Muthu Kumar
9354f1b8e6 floppy/scsi: fix setting of BIO flags
Fix setting bio flags in drivers (sd_dif/floppy).

Signed-off-by: Muthukumar R <muthur@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-05 15:49:43 -08:00
Anatolij Gustschin
73737b8787 drivers/rtc/rtc-r9701.c: fix crash in r9701_remove()
If probing the RTC didn't succeed due to failed RTC register access, the
RTC device will be unregistered.  Then, when removing the module
r9701_remove() causes a kernel crash while trying to unregister a not
registered RTC device.  Fix this by doing RTC register access test before
RTC device registration.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-05 15:49:43 -08:00
Dan Carpenter
22ea71d7f4 c2port: class_create() returns an ERR_PTR
class_create() doesn't return a NULL, it only returns ERR_PTRs.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-05 15:49:43 -08:00
Dan Carpenter
7ad12566dc pps: class_create() returns an ERR_PTR, not NULL
class_create() never returns NULLs only ERR_PTRs.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-05 15:49:43 -08:00
Mark Brown
f9353e70bc regmap: Fix rbtree block base in sync
Otherwise we'll end up running with bogus register numbers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-05 23:49:24 +00:00
Mark Brown
994f5db65e regcache: Make sure we sync register 0 in an rbtree cache
Most of the current users have register 0 as a volatile register or don't
have a register 0 so it's not been apparent that it's not getting synced.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-05 23:48:50 +00:00
Igor Maravic
036dafa28d r8169: add byte queue limit support.
Nothing fancy:
- sent bytes count is notified in the start_xmit path right before
  updating the owner bit in the hardware Tx descriptor (E. Dumazet)
- avoid useless tp->dev dereferencing in start_xmit (E. Dumazet)

Use of netdev_reset_queue is favored over proper accounting in
rtl8169_tx_clear_range since the latter would need more work for the
same result (nb: said accounting degenerates to nothing in xmit_frags).

Signed-off-by: Igor Maravic <igorm@etf.rs>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2012-03-06 00:24:26 +01:00
Junchang Wang
8027aa245b r8169: add 64bit statistics.
Switch to use ndo_get_stats64 to get 64bit statistics.
Two sync entries are used (one for Rx and one for Tx).

Signed-off-by: Junchang Wang <junchangwang@gmail.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-03-06 00:23:51 +01:00
NeilBrown
7a90484825 md/raid10: fix assembling of arrays with replacement devices.
commit 56a2559bb6 (md/raid10: recognise replacements ...)
changed 'run' to set ->replacement or ->rdev depending on the
'Replacement' status if the device, but it didn't remove the
old unconditional setting of 'rdev'.  So it was largely ineffective.

So remove that now.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-06 10:12:45 +11:00
Alan Cox
055bf38d3d drm, gma500: Fix Cedarview boot failures in 3.3-rc
Production GMA3600/3650 hardware turns out to be subtly different to the
development platforms.  This combined with a minor driver bug is causing
the kernel to hang on these platforms.

This patch does the following

 - turn down a couple of messages that were meant to be debug and are
   causing much confusion

 - ensure the hotplug interrupt is disabled on Cedartrail systems.

 - fix a bug where gtt roll mode called psbfb_sync, which tries to sync
   the 2D engine. On other devices it is harmless as the 2D engine is
   present but not in use when in gtt roll mode, on Cedartrail it causes
   a hang

Without these changes 3.3-rc hangs on boot on Cedartrail based systems.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-05 14:53:01 -08:00
Linus Torvalds
aa139092de Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

1) TCP SACK processing can calculate an incorrect reordering value in
   some cases, fix from Neal Cardwell.

2) tcp_mark_head_lost() can split SKBs in situations where it should
   not, violating send queue invariants expected by other pieces of
   code and thus resulting (eventually) in corrupted retransmit state
   counters.  Also from Neal Cardwell.

3) qla3xxx erroneously calls spin_lock_irqrestore() with constant
   hw_flags of zero.  Fix from Santosh Nayak.

4) Fix NULL deref in rt2x00, from Gabor Juhos.

5) pch_gbe passes address of wrong typed object to pch_gbe_validate_option
   thus corrupting part of the value.  From Dan Carpenter.

6) We must check the return value of nlmsg_parse() before trying to use
   the results.  From Eric Dumazet.

7) Bridging code fails to check return value of ipv6_dev_get_saddr()
   thus potentially leaving uninitialized garbage in the outgoing ipv6
   header.  From Ulrich Weber.

8) Due to rounding and a reversed operation on jiffies, bridge message
   ages can go backwards instead of forwards, thus breaking STP.  Fixes
   from Joakim Tjernlund.

9) r8169 modifies Config* registers without properly holding the
   Config9346 lock, resulting in corrupted IP fragments on some chips.
   Fix from Francois Romieu.

10) NET_PACKET_ENGINE default wan't set properly during the network
   driver mega-move.  Fix from Stephen Hemminger.

11) vmxnet3 uses TCP header size where it actually should use the UDP
   header size, fix from Shreyas Bhatewara.

12) Netfilter bridge module autoload is busted in the compat case, fix
   from Florian Westphal.

13) Wireless Key removal was not setting multicast bits correctly thus
   accidently killing the unicast key 0 and thus all traffic stops.
   Fix from Johannes Berg.

14) Fix endless retries of A-MPDU transmissions in brcm80211 driver.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
  qla3xxx: ethernet: Fix bogus interrupt state flag.
  bridge: check return value of ipv6_dev_get_saddr()
  rtnetlink: fix rtnl_calcit() and rtnl_dump_ifinfo()
  bridge: message age needs to increase, not decrease.
  bridge: Adjust min age inc for HZ > 256
  tcp: don't fragment SACKed skbs in tcp_mark_head_lost()
  r8169: corrupted IP fragments fix for large mtu.
  packetengines: fix config default
  vmxnet3: Fix transport header size
  enic: fix an endian bug in enic_probe()
  pch_gbe: memory corruption calling pch_gbe_validate_option()
  tg3: Fix tg3_get_stats64 for 5700 / 5701 devs
  tcp: fix false reordering signal in tcp_shifted_skb
  tcp: fix comment for tp->highest_sack
  netfilter: bridge: fix module autoload in compat case
  brcm80211: smac: only print block-ack timeout message at trace level
  brcm80211: smac: fix endless retry of A-MPDU transmissions
  mac80211: Fix a warning on changing to monitor mode from STA
  mac80211: zero initialize count field in ieee80211_tx_rate
  iwlwifi: fix key removal
  ...
2012-03-05 14:30:54 -08:00
Benoit Cousson
25db711df3 gpio/omap: Fix IRQ handling for SPARSE_IRQ
The driver is still relying on internal OMAP IRQ defines that
are not relevant anymore if OMAP is built with SPARSE_IRQ.

Replace the defines with the proper IRQ base number.
Clean some comment style issue.
Remove some hidden and ugly cpu_class_is_omap1() inside the
gpio header.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Tested-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
2012-03-05 23:02:53 +01:00
Benoit Cousson
384ebe1c28 gpio/omap: Add DT support to GPIO driver
Adapt the GPIO driver to retrieve information from a DT file.

Allocate the irq_base dynamically and rename bank->virtual_irq_start
to bank->irq_base.
Change irq_base type to int instead of u16 to match irq_alloc_descs
output.

Add documentation for GPIO properties specific to OMAP.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
2012-03-05 23:02:53 +01:00
Benoit Cousson
96751fcbe5 gpio/omap: Use devm_ API and add request_mem_region
Replace the regular kzalloc and ioremap with the devm_ equivalent
to simplify error handling.

Add the missing devm_request_mem_region to reserve the region used
by the driver.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com>
2012-03-05 23:02:52 +01:00
Benoit Cousson
862ff64011 gpio/omap: Remove bank->id information and misc cleanup
The driver does not need anymore any id to identify the GPIO instance.
Remove every occurence of the bank->id inside the driver.

Remove two trailing spaces.
Add a dev variable for better readability in probe.
Remove unused variable bank->pbase.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Acked-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
2012-03-05 23:02:51 +01:00
Santosh Nayak
9d1dfc06b1 qla3xxx: ethernet: Fix bogus interrupt state flag.
In 'ql_adapter_initialize'
the first call for 'spin_unlock_irqrestore()' is with hw_flags = 0,
which is as good as 'spin_unlock_irq()' (unconditional interrupt
enabling). If this is intended, then for better performance
'spin_unlock_irqrestore()' can be replaced with 'spin_unlock_irq()'
and 'spin_lock_irqsave()' can be replaced by 'spin_lock_irq()

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-05 16:50:52 -05:00
Eric Dumazet
18f973af3e mlx4_en: remove sparse errors
Fix new sparse errors introduced in commit 6221217199 (mlx4_en: dont
change mac_header on xmit)

Reported-by: Or Gerlitz <or.gerlitz@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-05 16:42:45 -05:00
Arend van Spriel
769009b89d brcm80211: smac: cleanup couple of debug output statements
Tidying up some debug statements in brcms_c_ampdu_dotxstatus_complete()
that got broken strings to satisfy checkpatch, but the rules changed.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:54:03 -05:00
Arend van Spriel
b0c359b2f6 brcm80211: smac: remove firmware requests from init_module syscall
As indicated in [1] on netdev mailing list drivers should not block
on the init_module() syscall. This patch defers the actual driver
registration to a workqueue so the init_module() syscall can complete
without delay.

[1] http://article.gmane.org/gmane.linux.network/217729/

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:54:01 -05:00
Arend van Spriel
e64a4b708f brcm80211: fmac: remove firmware requests from init_module syscall
As indicated in [1] on netdev mailing list drivers should not block
on the init_module() syscall. This patch defers the actual driver
registration to a workqueue so the init_module() syscall can complete
without delay.

[1] http://article.gmane.org/gmane.linux.network/217729/

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:53:59 -05:00
Arend van Spriel
549040abbc brcm80211: fmac: initialize host interface drivers regardless result
The module init function of brcmfmac calls init functions for SDIO and
USB doing driver registration. This patch removes terminating the module
init when a driver registration for one host interface fails.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:53:57 -05:00
Arend van Spriel
1d9c1796bc brcm80211: fmac: use counters in brcmf_bus structure
The usb code defines a structure for counting statistics. However,
it should use the statistics entry provided in brcmf_bus as that is
exposed to the net_device. The usb private statistics counter only
remains with counters for control packets between driver and usb
device.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:53:55 -05:00
Arend van Spriel
ac94f196a5 brcm80211: fmac: remove brcmf_usb_attrib structure
Several fields in this structure are only written once or not used
at all. Remaining two fields have been moved and brcmf_usb_attrib
definition has been removed.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Kan Yan <kanyan@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:53:53 -05:00
Arend van Spriel
3bc7e29c98 brcm80211: fmac: remove unnecessary NULL pointer check
In brcmf_usb_up() the variable devinfo was checked for being
a NULL pointer, but this can not happen. Also the check was done
after dereferencing the pointer. This patch removes the check.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Kan Yan <kanyan@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:53:51 -05:00
Larry Finger
ebecdcc12f rtlwifi: rtl8192c: Prevent sleeping from invalid context in rtl8192cu
When driver rtl8192cu is used with the debug level set to 3 or greater,
the result is "sleeping function called from invalid context" due to
an rcu_read_lock() call in the DM refresh routine in driver rtl8192c.
This lock is not necessary as the USB driver does not use the struct
being protected, thus the lock is set only when a PCI interface is
active.

This bug is reported in https://bugzilla.kernel.org/show_bug.cgi?id=42775.

Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Cc: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:53:49 -05:00
Larry Finger
8f526ab4aa rtlwifi: Remove extraneous value return
In usb.c, routine _rtl_usb_init_sw() always returns 0, and rtl_usb_probe()
never checks the returned value. Thus we can change _rtl_usb_init_sw() to
a void routine. In addition, remove the underscore at the beginning of the
name of the routine.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:53:47 -05:00
Larry Finger
48de1a17fc rtlwifi: Detect misread of end-point count
In the unlikely event of a misread of the USB end point count, the driver
generates a divide fault. To prevent this, add a check of the value
returned by _rtl_usb_init(). In addition, add some logging to indicate
why the condition occurred.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:53:47 -05:00
Hefty, Sean
186834b5de RDMA/ucma: Fix AB-BA deadlock
When we destroy a cm_id, we must purge associated events from the
event queue.  If the cm_id is for a listen request, we also purge
corresponding pending connect requests.  This requires destroying
the cm_id's associated with the connect requests by calling
rdma_destroy_id().  rdma_destroy_id() blocks until all outstanding
callbacks have completed.

The issue is that we hold file->mut while purging events from the
event queue.  We also acquire file->mut in our event handler.  Calling
rdma_destroy_id() while holding file->mut can lead to a deadlock,
since the event handler callback cannot acquire file->mut, which
prevents rdma_destroy_id() from completing.

Fix this by moving events to purge from the event queue to a temporary
list.  We can then release file->mut and call rdma_destroy_id()
outside of holding any locks.

Bug report by Or Gerlitz <ogerlitz@mellanox.com>:

    [ INFO: possible circular locking dependency detected ]
    3.3.0-rc5-00008-g79f1e43-dirty #34 Tainted: G          I

    tgtd/9018 is trying to acquire lock:
     (&id_priv->handler_mutex){+.+.+.}, at: [<ffffffffa0359a41>] rdma_destroy_id+0x33/0x1f0 [rdma_cm]

    but task is already holding lock:
     (&file->mut){+.+.+.}, at: [<ffffffffa02470fe>] ucma_free_ctx+0xb6/0x196 [rdma_ucm]

    which lock already depends on the new lock.


    the existing dependency chain (in reverse order) is:

    -> #1 (&file->mut){+.+.+.}:
           [<ffffffff810682f3>] lock_acquire+0xf0/0x116
           [<ffffffff8135f179>] mutex_lock_nested+0x64/0x2e6
           [<ffffffffa0247636>] ucma_event_handler+0x148/0x1dc [rdma_ucm]
           [<ffffffffa035a79a>] cma_ib_handler+0x1a7/0x1f7 [rdma_cm]
           [<ffffffffa0333e88>] cm_process_work+0x32/0x119 [ib_cm]
           [<ffffffffa03362ab>] cm_work_handler+0xfb8/0xfe5 [ib_cm]
           [<ffffffff810423e2>] process_one_work+0x2bd/0x4a6
           [<ffffffff810429e2>] worker_thread+0x1d6/0x350
           [<ffffffff810462a6>] kthread+0x84/0x8c
           [<ffffffff81369624>] kernel_thread_helper+0x4/0x10

    -> #0 (&id_priv->handler_mutex){+.+.+.}:
           [<ffffffff81067b86>] __lock_acquire+0x10d5/0x1752
           [<ffffffff810682f3>] lock_acquire+0xf0/0x116
           [<ffffffff8135f179>] mutex_lock_nested+0x64/0x2e6
           [<ffffffffa0359a41>] rdma_destroy_id+0x33/0x1f0 [rdma_cm]
           [<ffffffffa024715f>] ucma_free_ctx+0x117/0x196 [rdma_ucm]
           [<ffffffffa0247255>] ucma_close+0x77/0xb4 [rdma_ucm]
           [<ffffffff810df6ef>] fput+0x117/0x1cf
           [<ffffffff810dc76e>] filp_close+0x6d/0x78
           [<ffffffff8102b667>] put_files_struct+0xbd/0x17d
           [<ffffffff8102b76d>] exit_files+0x46/0x4e
           [<ffffffff8102d057>] do_exit+0x299/0x75d
           [<ffffffff8102d599>] do_group_exit+0x7e/0xa9
           [<ffffffff8103ae4b>] get_signal_to_deliver+0x536/0x555
           [<ffffffff81001717>] do_signal+0x39/0x634
           [<ffffffff81001d39>] do_notify_resume+0x27/0x69
           [<ffffffff81361c03>] retint_signal+0x46/0x83

    other info that might help us debug this:

     Possible unsafe locking scenario:

           CPU0                    CPU1
           ----                    ----
      lock(&file->mut);
                                   lock(&id_priv->handler_mutex);
                                   lock(&file->mut);
      lock(&id_priv->handler_mutex);

     *** DEADLOCK ***

    1 lock held by tgtd/9018:
     #0:  (&file->mut){+.+.+.}, at: [<ffffffffa02470fe>] ucma_free_ctx+0xb6/0x196 [rdma_ucm]

    stack backtrace:
    Pid: 9018, comm: tgtd Tainted: G          I  3.3.0-rc5-00008-g79f1e43-dirty #34
    Call Trace:
     [<ffffffff81029e9c>] ? console_unlock+0x18e/0x207
     [<ffffffff81066433>] print_circular_bug+0x28e/0x29f
     [<ffffffff81067b86>] __lock_acquire+0x10d5/0x1752
     [<ffffffff810682f3>] lock_acquire+0xf0/0x116
     [<ffffffffa0359a41>] ? rdma_destroy_id+0x33/0x1f0 [rdma_cm]
     [<ffffffff8135f179>] mutex_lock_nested+0x64/0x2e6
     [<ffffffffa0359a41>] ? rdma_destroy_id+0x33/0x1f0 [rdma_cm]
     [<ffffffff8106546d>] ? trace_hardirqs_on_caller+0x11e/0x155
     [<ffffffff810654b1>] ? trace_hardirqs_on+0xd/0xf
     [<ffffffffa0359a41>] rdma_destroy_id+0x33/0x1f0 [rdma_cm]
     [<ffffffffa024715f>] ucma_free_ctx+0x117/0x196 [rdma_ucm]
     [<ffffffffa0247255>] ucma_close+0x77/0xb4 [rdma_ucm]
     [<ffffffff810df6ef>] fput+0x117/0x1cf
     [<ffffffff810dc76e>] filp_close+0x6d/0x78
     [<ffffffff8102b667>] put_files_struct+0xbd/0x17d
     [<ffffffff8102b5cc>] ? put_files_struct+0x22/0x17d
     [<ffffffff8102b76d>] exit_files+0x46/0x4e
     [<ffffffff8102d057>] do_exit+0x299/0x75d
     [<ffffffff8102d599>] do_group_exit+0x7e/0xa9
     [<ffffffff8103ae4b>] get_signal_to_deliver+0x536/0x555
     [<ffffffff810654b1>] ? trace_hardirqs_on+0xd/0xf
     [<ffffffff81001717>] do_signal+0x39/0x634
     [<ffffffff8135e037>] ? printk+0x3c/0x45
     [<ffffffff8106546d>] ? trace_hardirqs_on_caller+0x11e/0x155
     [<ffffffff810654b1>] ? trace_hardirqs_on+0xd/0xf
     [<ffffffff81361803>] ? _raw_spin_unlock_irq+0x2b/0x40
     [<ffffffff81039011>] ? set_current_blocked+0x44/0x49
     [<ffffffff81361bce>] ? retint_signal+0x11/0x83
     [<ffffffff81001d39>] do_notify_resume+0x27/0x69
     [<ffffffff8118a1fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f
     [<ffffffff81361c03>] retint_signal+0x46/0x83

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-03-05 12:27:57 -08:00
Dan Carpenter
380aeef894 mwifiex: endian bug in mwifiex_drv_change_adhoc_chan()
In mwifiex_drv_change_adhoc_chan() we pass channel to
mwifiex_bss_ioctl_ibss_channel() which sets the high 16 bits.  This
works on little endian systems but not on big endian ones.  I've changed
mwifiex_drv_change_adhoc_chan() to use a 16 bit variable.  This matches
the other functions in the file.

I considered changing mwifiex_change_adhoc_chan() as well but it turns
out that the function isn't implemented so I just removed the
definition.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:24:14 -05:00
Max Filippov
62ebeed8d0 p54spi: Release GPIO lines and IRQ on error in p54spi_probe
This makes it possible to reload driver if insmod has failed due to
missing firmware.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:23:17 -05:00
Jussi Kivilinna
461bc26c93 rndis_wlan: use u8 for key indexes
cfg80211 uses u8 for key indexes and so should rndis_wlan.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:23:17 -05:00
Jussi Kivilinna
f096ce6d24 rndis_wlan: use RNDIS_WLAN_NUM_KEYS for all key index checks
Use new RNDIS_WLAN_NUM_KEYS for checks in add_wep_key() and add_wpa_key().

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:23:17 -05:00
Jussi Kivilinna
f808e4ad05 rndis_wlan: fix le16/le32_to_cpu mix up with config.beacon_period
'beacon_period' in 'struct ndis_80211_conf' is __le32 instead of __le16 so
le32_to_cpu must be used instead of le16_to_cpu.

Also correct 'beacon_interval' variables used for passing this value forward
from u16 to u32 and rename those variables 'beacon_period' This is to avoid
confusion because 'beacon_interval' is defined as __le16 at other structure,
'struct ndis_80211_fixed_ies'.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:23:16 -05:00
Dan Carpenter
e4e02da2ef rndis_wlan: prevent integer overflow in indication()
If we pick a high value for "offset" then it could lead to an integer
overflow and we would get past the check for:
	if (offset + len > buflen) { ...

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:23:16 -05:00
Dan Carpenter
551d6fe6cb rndis_wlan: make some variables unsigned
These variables can never be less than zero because we cap them in
get_device_pmkids().  Let's make them unsigned here because it's simpler
to not have to worry about negative numbers when we read the code.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:23:16 -05:00
Dan Carpenter
b26e395038 rndis_wlan: remove unneeded variables
We never use the "len" variable.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:23:15 -05:00
Dan Carpenter
41eedf39df rndis_wlan: integer overflows in rndis_wlan_do_link_up_work()
If "offset" is negative then we can get past this check:
	if (offset > CONTROL_BUFFER_SIZE)
Or if we pick a very high "req_ie_len" then we can get around the check:
	if (offset + req_ie_len > CONTROL_BUFFER_SIZE)

I made "resp_ie_len" and "req_ie_len" unsigned.  I don't know if it was
intentional that they were signed in the original.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:23:15 -05:00
Hauke Mehrtens
5809802180 b43: prevent firmware on bcm5354 from taking over wrong GPIO pins
When using the bcm5354 (Soc with integrated LP-PHY Wifi) with a recent
firmware >= 478.104 it runs out of memory after a very short time in
OpenWrt after doing an active scan or any thing else where packages are
send. This was cased by a gpio misconfiguration, the firmware triggered
the GPIO pins used for buttons on some devices and that caused an other
driver (OpenWrt diag) listening for these buttons irqs to send many
messages to the user space.
This patch fixes the bug for my devices (Asus WL-520GU) and makes it
work with firmware 666.2. Now the firmware just uses LED GPIO pin
number 1 and not the button pins any more.

This is the GPIO Pin layout used on my device, see [0].
GPIO pin layout:
pin#    name    type
0       power   led
1       wlan    led
2       reset   button
3       ses     buttom

This is the nvram configuration output of "nvram show |grep gpio"

related nvram configuration:
wl0gpio2=11
wl0gpio3=11
wl0gpio0=11
wl0gpio1=0x02
reset_gpio=2

[0]: https://dev.openwrt.org/browser/trunk/package/broadcom-diag/src/diag.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:23:14 -05:00