Commit graph

153,333 commits

Author SHA1 Message Date
Vikas Chaudhary
a7380a6531 [SCSI] qla4xxx: Fix sparse warning
Fix following warning:-
drivers/scsi/qla4xxx/ql4_os.c:35:5: warning: symbol 'ql4xdisablesysfsboot' was not declared. Should it be static?

drivers/scsi/qla4xxx/ql4_iocb.c:461:5: warning: symbol 'qla4xxx_send_mbox_iocb' was not declared. Should it be static?

drivers/scsi/qla4xxx/ql4_os.c:3025:6: warning: symbol 'qla4xxx_do_work' was not declared. Should it be static?

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 17:01:14 -06:00
Manish Rangankar
173269ef29 [SCSI] qla4xxx: Add support for multiple session per host.
This patch will allow iscsiadm to create multiple session
for the same target on per host.

Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 17:00:24 -06:00
Mike Christie
fca9f04d46 [SCSI] qla4xxx: Export CHAP index as sysfs attribute
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:59:19 -06:00
Amit Shah
4eb05d562e virtio: balloon: leak / fill balloon across S4
commit e562966dba added support for S4 to
the balloon driver.  The freeze function did nothing to free the pages,
since reclaiming the pages from the host to immediately give them back
(if S4 was successful) seemed wasteful.  Also, if S4 wasn't successful,
the guest would have to re-fill the balloon.  On restore, the pages were
supposed to be marked freed and the free page counters were incremented
to reflect the balloon was totally deflated.

However, this wasn't done right.  The pages that were earlier taken away
from the guest during a balloon inflation operation were just shown as
used pages after a successful restore from S4.  Just a fancy way of
leaking lots of memory.

Instead of trying that, just leak the balloon on freeze and fill it on
restore/thaw paths.  This works properly now.  The optimisation to not
leak can be added later on after a bit of refactoring of the code.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-03-01 09:28:41 +10:30
Mike Christie
3053495274 [SCSI] scsi_transport: Export CHAP index as sysfs attribute
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:58:18 -06:00
Nilesh Javali
376738af50 [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry
For offload iSCSI like qla4xxx CHAP entries are stored in FLASH.
This patch adds support to list CHAP entries stored in FLASH and
delete specified CHAP entry from FLASH using iscsi tools.

Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:57:20 -06:00
Nilesh Javali
6260a5d221 [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry
For offload iSCSI like qla4xxx CHAP entries are stored in FLASH.
This patch adds support to list CHAP entries stored in FLASH and
delete specified CHAP entry from FLASH using iscsi tools.

Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:55:59 -06:00
Santosh Nayak
8270ee2abb [SCSI] pm8001: fix endian issue with code optimization.
1. Fix endian issue.
2. Fix the following warning :
    " drivers/scsi/pm8001/pm8001_hwi.c:2932:32: warning: comparison
      between ‘enum sas_device_type’ and ‘enum sas_dev_type’".
3. Few code optimization.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:54:09 -06:00
Santosh Nayak
50ec5babd3 [SCSI] pm8001: Fix possible racing condition.
There is a possble racing scenario.

'process_oq' is called by two routines, as shown below.

pm8001_8001_dispatch = {
         .......

        .isr             = pm8001_chip_isr --> process_oq,// A
        .isr_process_oq  = process_oq,                   //  B
        .....
}

process_oq() --> process_one_iomb() --> mpi_sata_completion()

In 'mpi_sata_completion', "pm8001_ha->lock" is first released.
It means lock is taken before,  which is true for
the context A, as 'pm8001_ha->lock' is taken in 'pm8001_chip_isr()'

But for context B there is no lock taken before and pm8001_ha->lock
is unlocked in 'mpi_sata_completion()'. This may unlock the lock
taken in context A. Possible racing ??

If 'pm8001_ha->lock' is taken in 'process_oq()' instead of
'pm8001_chip_isr' then the above issue can be avoided.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:52:59 -06:00
Santosh Nayak
bdaefbf580 [SCSI] pm8001: Fix bogus interrupt state flag issue.
Static checker is giving following warning:
" error: calling 'spin_unlock_irqrestore()' with bogus flags"

The code flow is as shown below:
process_oq() --> process_one_iomb --> mpi_sata_completion

In 'mpi_sata_completion'
the first call for 'spin_unlock_irqrestore()' is with flags=0,
which is as good as 'spin_unlock_irq()' ( unconditional interrupt
enabling).

So for better performance 'spin_unlock_irqrestore()' can be replaced
with 'spin_unlock_irq()' and 'spin_lock_irqsave()' can be replaced by
'spin_lock_irq()'.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:49:55 -06:00
Wayne Boyer
cd9b3d04b4 [SCSI] ipr: update PCI ID definitions for new adapters
This patch updates some PCI ID definitions for new adapters based on the next
generation 64 bit IOA PCI interface chip.

Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:48:27 -06:00
Dan Carpenter
8a6552299e [SCSI] qla2xxx: handle default case in qla2x00_request_firmware()
This silences a static checker warning.  Also we're always adding new
types of firmware, so it might fix a bug in real life some day.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:47:13 -06:00
Florian Tobias Schandinat
0d04c58aa4 Merge branch 'fbdev-for-linus' into fbdev-next 2012-02-29 22:42:55 +00:00
Tomi Valkeinen
a3d0e4aeca OMAPDSS: APPLY: make ovl_enable/disable synchronous
ovl->enable/disable are meant to be synchronous so that they can handle
the configuration of fifo sizes. The current kernel doesn't configure
fifo sizes yet, and so the code doesn't need to block to function (from
omapdss driver's perspective).

However, for the users of omapdss a non-blocking ovl->disable is
confusing, because they don't know when the memory area is not used
any more.

Furthermore, when the fifo size configuration is added in the next merge
window, the change from non-blocking to blocking could cause side
effects to the users of omapdss. So by making the functions block
already will keep them behaving in the same manner.

And, while not the main purpose of this patch, this will also remove the
compile warning:

drivers/video/omap2/dss/apply.c:350: warning:
'wait_pending_extra_info_updates' defined but not used

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-29 22:42:28 +00:00
Tomi Valkeinen
c9043ff9e6 OMAPDSS: panel-dvi: Add Kconfig dependency on I2C
panel-dvi uses i2c, but the Kconfig didn't have dependency on I2C. Add
it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-29 22:42:28 +00:00
Andrzej Jakowski
13de2c5419 [SCSI] isci: improvements in driver unloading routine
This patch fixes scenario where driver removal should be possible
only when driver is in READY state. Also it removes redundant
invocation of routine disabling SCU interrupts - this method is
called somewhere else in driver deinitialization path.

Signed-off-by: Andrzej Jakowski <andrzej.jakowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:24:41 -06:00
Dan Williams
e462116afb [SCSI] isci: improve phy event warnings
isci occasionally spews messages like:

isci 0000:03:00.0: sci_phy_event_handler: PHY starting substate machine received unexpected event_code b3940000

...which is not very helpful, since we don't know which controller,
which phy, the exact state, or a decode of the event.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:24:13 -06:00
Dan Williams
d7a0ccdd9b [SCSI] isci: debug, provide state-enum-to-string conversions
Debugging the driver requires tracing the state transtions and tracing
state names is less work than decoding numbers.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:23:15 -06:00
Paul Gortmaker
50af5ead3b bug.h: add include of it to various implicit C users
With bug.h currently living right in linux/kernel.h there
are files that use BUG_ON and friends but are not including
the header explicitly.  Fix them up so we can remove the
presence in kernel.h file.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-29 17:15:08 -05:00
Dan Williams
16d3db1b29 [SCSI] scsi_transport_sas: 'enable' phys on reset
If userspace requests a phy reset, treat that as a request for the phy
to be enabled since that is the effect on hardware.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:43:54 -06:00
Dan Williams
26a2e68f81 [SCSI] libsas: don't recover end devices attached to disabled phys
If userspace has decided to disable a phy the kernel should honor that
and not inadvertantly re-enable the phy via error recovery.  This is
more straightforward in the sata case where link recovery (via
libata-eh) is separate from sas_task cancelling in libsas-eh.  Teach
libsas to accept -ENODEV as a successful response from I_T_nexus_reset
('successful' in terms of not escalating further).

This is a more comprehensive fix then "libsas: don't recover 'gone'
devices in sas_ata_hard_reset()", as it is no longer sata-specific.

aic94xx does check the return value from sas_phy_reset() so if the phy
is disabled we proceed with clearing the I_T_nexus.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:42:51 -06:00
Dan Williams
77c309f3cd [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata
If discovery returns 0 for target_port_protocols but shows an attached
sata device, just report SAS_PROTOCOL_SATA in the identify data so
userspace can reliably search for sata devices in the domain.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:41:51 -06:00
Dan Williams
899fcf40f3 [SCSI] libsas: set attached device type and target protocols for local phys
Before:
$ cat /sys/class/sas_phy/phy-6\:3/device_type
none
$ cat /sys/class/sas_phy/phy-6\:3/target_port_protocols
none

After:
$ cat /sys/class/sas_phy/phy-6\:3/device_type
end device
$ cat /sys/class/sas_phy/phy-6\:3/target_port_protocols
sata

Also downgrade the phy_list_lock to _irq instead of _irqsave since
libsas will never call sas_get_port_device with interrupts disbled.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:40:33 -06:00
Dan Williams
9a10b33caf [SCSI] libsas: revert ata srst
libata issues follow up srsts when the controller has a hard time
recording the signature-fis after a reset, or if the link supports port
multipliers.  libsas does not support port multipliers and no current
libsas lldds appear to need help retrieving the signature fis.  Revert
it for now to remove confusion.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:39:25 -06:00
Dan Williams
840234745e [SCSI] libsas: fix lifetime of SAS_HA_FROZEN
Until all sas_tasks are known to no longer be in-flight this flag gates late
completions from colliding with error handling.  However, it must be cleared
prior to the submission of scsi_send_eh_cmnd() requests, otherwise those
commands will never be completed correctly.

This was spotted by slub debug:
 =============================================================================
 BUG sas_task: Objects remaining on kmem_cache_close()
 -----------------------------------------------------------------------------

 INFO: Slab 0xffffea001f0eba00 objects=34 used=1 fp=0xffff8807c3aecb00 flags=0x8000000000004080
 Pid: 22919, comm: modprobe Not tainted 3.2.0-isci+ #2
 Call Trace:
  [<ffffffff810fcdcd>] slab_err+0xb0/0xd2
  [<ffffffff810e1c50>] ? free_percpu+0x31/0x117
  [<ffffffff81100122>] ? kzalloc+0x14/0x16
  [<ffffffff81100122>] ? kzalloc+0x14/0x16
  [<ffffffff81100486>] kmem_cache_destroy+0x11d/0x270
  [<ffffffffa0112bdc>] sas_class_exit+0x10/0x12 [libsas]
  [<ffffffff81078fba>] sys_delete_module+0x1c4/0x23c
  [<ffffffff814797ba>] ? sysret_check+0x2e/0x69
  [<ffffffff8126479e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
  [<ffffffff81479782>] system_call_fastpath+0x16/0x1b
 INFO: Object 0xffff8807c3aed280 @offset=21120
 INFO: Allocated in sas_alloc_task+0x22/0x90 [libsas] age=4615311 cpu=2 pid=12966
  __slab_alloc.clone.3+0x1d1/0x234
  kmem_cache_alloc+0x52/0x10d
  sas_alloc_task+0x22/0x90 [libsas]
  sas_queuecommand+0x20e/0x230 [libsas]
  scsi_send_eh_cmnd+0xd1/0x30c
  scsi_eh_try_stu+0x4f/0x6b
  scsi_eh_ready_devs+0xba/0x6ef
  sas_scsi_recover_host+0xa35/0xab1 [libsas]
  scsi_error_handler+0x14b/0x5fa
  kthread+0x9d/0xa5
  kernel_thread_helper+0x4/0x10

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:38:09 -06:00
Dan Williams
9508a66f89 [SCSI] libsas: async ata scanning
libsas ata error handling is already async but this does not help the
scan case.  Move initial link recovery out from under host->scan_mutex,
and delay synchronization with eh until after all port probe/recovery
work has been queued.

Device ordering is maintained with scan order by still calling
sas_rphy_add() in order of domain discovery.

Since we now scan the domain list when invoking libata-eh we need to be
careful to check for fully initialized ata ports.

Acked-by: Jack Wang <jack_wang@usish.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:35:41 -06:00
Dan Williams
92625f9bff [SCSI] libsas: restore scan order
ata devices are always scanned after ssp.  Prior to the ata error
handling reworks libsas would tend to scan devices in ascending expander
phy order.  Restore this ordering by deferring ssp discovery to a
DISCE_PROBE event, and keep the probe order consistent with the
discovery order, not the placement of sata devices.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:34:19 -06:00
Dan Williams
c666aae691 [SCSI] libsas: delete device on sas address changed
If the phy is attached to a new sas address unregister the first address
before processing the new attachment.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:33:39 -06:00
Dan Williams
354cf82980 [SCSI] libsas: let libata recover links that fail to transmit initial sig-fis
libsas fails to discover all sata devices in the domain.  If a device fails
negotiation and does not transmit a signature fis the link needs recovery.
libata already understands how to manage slow to come up links, so treat these
conditions as ata device attach events for the purposes of creating an
ata_port.  This allows libata to manage retrying link bring up.

Rediscovery is modified to be careful about checking changes in dev_type.  It
looks like libsas leaks old devices if the sas address changes, but that's a
fix for another patch.

Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:33:02 -06:00
Dan Williams
a692b0eec5 [SCSI] libsas: fix sas port naming
Make sas-port naming consistent with the expander-attached case whereby
the phy-id is the last digit in the port name.  Otherwise we get the
random behavior of the allocation order.

Reported-by: Patrick Thomson <patrick.s.thomson@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:29:06 -06:00
Dan Williams
d214d81e88 [SCSI] libsas: improve debug statements
It's difficult to determine which domain_device is triggering error recovery,
so convert messages like:

  sas: ex 5001b4da000e703f phy08:T attached: 5001b4da000e7028
  sas: ex 5001b4da000e703f phy09:T attached: 5001b4da000e7029
  ...
  ata7: sas eh calling libata port error handler
  ata8: sas eh calling libata port error handler

...into:

  sas: ex 5001517e85cfefff phy05:T:9 attached: 5001517e85cfefe5 (stp)
  sas: ex 5001517e3b0af0bf phy11:T:8 attached: 5001517e3b0af0ab (stp)
  ...
  sas: ata7: end_device-21:1: dev error handler
  sas: ata8: end_device-20:0:5: dev error handler

which shows attached link rate, device type, and associates a
domain_device with its ata_port id to correlate messages emitted from
libata-eh.

As Doug notes, we can also take the opportunity to clarify expander phy
routing capabilities.

[dgilbert@interlog.com: clarify table2table with 'U']
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:28:24 -06:00
Maciej Trela
fdfd9d1b89 [SCSI] libsas: kill spurious sas_put_device
Holdover from a patch rework, prior to the addition of SAS_DEV_DESTROY
we were holding a reference while the destruct was pending in case the
domain was torn down before the desctruct event ran.  That case is
covered by SAS_DEV_DESTROY, and the sas_put_device() just corrupts freed
memory, or worse frees the memory while another agent holds a reference.

Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:27:44 -06:00
Dan Williams
5d7f6d1071 [SCSI] libsas: fix sas_unregister_ports vs sas_drain_work
We need to hold drain_mutex across the unregistration as port down events
queue device removal as chained events, so we need to make sure no other
drainers are active.

[ 1118.673968] WARNING: at kernel/workqueue.c:996 __queue_work+0x11a/0x326()
[ 1118.681982] Hardware name: S2600CP
[ 1118.686193] Modules linked in: isci(-) libsas scsi_transport_sas nls_utf8
ipv6 uinput sg iTCO_wdt iTCO_vendor_support i2c_i801 i2c_core ioatdma dca
sd_mod sr_mod cdrom ahci libahci libata [last unloaded: scsi_transport_sas]
[ 1118.709893] Pid: 6831, comm: rmmod Not tainted 3.2.0-isci+ #1
[ 1118.716727] Call Trace:
[ 1118.719867]  [<ffffffff8103e9f5>] warn_slowpath_common+0x85/0x9d
[ 1118.727000]  [<ffffffff8103ea27>] warn_slowpath_null+0x1a/0x1c
[ 1118.733942]  [<ffffffff81056d44>] __queue_work+0x11a/0x326
[ 1118.740481]  [<ffffffff81056f99>] queue_work_on+0x1b/0x22
[ 1118.746925]  [<ffffffff81057106>] queue_work+0x37/0x3e
[ 1118.753105]  [<ffffffffa0120e05>] ? sas_discover_event+0x55/0x82 [libsas]
[ 1118.761094]  [<ffffffff813217c3>] scsi_queue_work+0x42/0x44
[ 1118.767717]  [<ffffffffa0120e19>] sas_discover_event+0x69/0x82 [libsas]
[ 1118.775509]  [<ffffffffa0120f5b>] sas_unregister_dev+0xc3/0xcc [libsas]
[ 1118.783319]  [<ffffffffa0120fae>] sas_unregister_domain_devices+0x4a/0xc8 [libsas]
[ 1118.792731]  [<ffffffffa0120071>] sas_deform_port+0x60/0x1a6 [libsas]
[ 1118.800339]  [<ffffffffa01201ea>] sas_unregister_ports+0x33/0x44 [libsas]
[ 1118.808342]  [<ffffffffa011f7e5>] sas_unregister_ha+0x41/0x6b [libsas]
[ 1118.816055]  [<ffffffffa0134055>] isci_unregister+0x22/0x4d [isci]
[ 1118.823384]  [<ffffffffa0143040>] isci_pci_remove+0x2e/0x60 [isci]

Reported-by: Jacek Danecki <jacek.danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:27:09 -06:00
Dan Williams
ab5266335b [SCSI] libsas: route local link resets through ata-eh
Similar to the conversion of the transport-class reset we want bsg
initiated resets to be managed by libata.

Reported-by: Jacek Danecki <jacek.danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:25:32 -06:00
Dan Williams
d230ce691c [SCSI] libsas: fix mixed topology recovery
If we have a domain with sas and sata devices there may still be sas
recovery actions to take after peeling off the commands to send to
libata.

Reported-by: Andrzej Jakowski <andrzej.jakowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:23:24 -06:00
Dan Williams
8abda4d28a [SCSI] libsas: close scsi_remove_target() vs libata-eh race
ata_port lifetime in libata follows the host.  In libsas it follows the
scsi_target.  Once scsi_remove_device() has caused all commands to be
completed it allows scsi_remove_target() to immediately proceed to
freeing the ata_port causing bug reports like:

[  848.393333] BUG: spinlock bad magic on CPU#4, kworker/u:2/5107
[  848.400262] general protection fault: 0000 [#1] SMP
[  848.406244] CPU 4
[  848.408310] Modules linked in: nls_utf8 ipv6 uinput i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support ioatdma dca sg sd_mod sr_mod cdrom ahci libahci isci libsas libata scsi_transport_sas [last unloaded: scsi_wait_scan]
[  848.432060]
[  848.434137] Pid: 5107, comm: kworker/u:2 Not tainted 3.2.0-isci+ #8 Intel Corporation S2600CP/S2600CP
[  848.445310] RIP: 0010:[<ffffffff8126a68c>]  [<ffffffff8126a68c>] spin_dump+0x5e/0x8c
[  848.454787] RSP: 0018:ffff8807f868dca0  EFLAGS: 00010002
[  848.461137] RAX: 0000000000000048 RBX: ffff8807fe86a630 RCX: ffffffff817d0be0
[  848.469520] RDX: 0000000000000000 RSI: ffffffff814af1cf RDI: 0000000000000002
[  848.477959] RBP: ffff8807f868dcb0 R08: 00000000ffffffff R09: 000000006b6b6b6b
[  848.486327] R10: 000000000003fb8c R11: ffffffff81a19448 R12: 6b6b6b6b6b6b6b6b
[  848.494699] R13: ffff8808027dc520 R14: 0000000000000000 R15: 000000000000001e
[  848.503067] FS:  0000000000000000(0000) GS:ffff88083fd00000(0000) knlGS:0000000000000000
[  848.512899] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  848.519710] CR2: 00007ff77d001000 CR3: 00000007f7a5d000 CR4: 00000000000406e0
[  848.528072] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  848.536446] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  848.544831] Process kworker/u:2 (pid: 5107, threadinfo ffff8807f868c000, task ffff8807ff348000)
[  848.555327] Stack:
[  848.557959]  ffff8807fe86a630 ffff8807fe86a630 ffff8807f868dcd0 ffffffff8126a6e0
[  848.567072]  ffffffff817c142f ffff8807fe86a630 ffff8807f868dcf0 ffffffff8126a703
[  848.576190]  ffff8808027dc520 0000000000000286 ffff8807f868dd10 ffffffff814af1bb
[  848.585281] Call Trace:
[  848.588409]  [<ffffffff8126a6e0>] spin_bug+0x26/0x28
[  848.594357]  [<ffffffff8126a703>] do_raw_spin_unlock+0x21/0x88
[  848.601283]  [<ffffffff814af1bb>] _raw_spin_unlock_irqrestore+0x2c/0x65
[  848.609089]  [<ffffffffa001c103>] ata_scsi_port_error_handler+0x548/0x557 [libata]
[  848.618331]  [<ffffffff81061813>] ? async_schedule+0x17/0x17
[  848.625060]  [<ffffffffa004f30f>] async_sas_ata_eh+0x45/0x69 [libsas]
[  848.632655]  [<ffffffff810618aa>] async_run_entry_fn+0x97/0x125
[  848.639670]  [<ffffffff81057439>] process_one_work+0x207/0x38d
[  848.646577]  [<ffffffff8105738c>] ? process_one_work+0x15a/0x38d
[  848.653681]  [<ffffffff810576f7>] worker_thread+0x138/0x21c
[  848.660305]  [<ffffffff810575bf>] ? process_one_work+0x38d/0x38d
[  848.667493]  [<ffffffff8105b098>] kthread+0x9d/0xa5
[  848.673382]  [<ffffffff8106e1bd>] ? trace_hardirqs_on_caller+0x12f/0x166
[  848.681304]  [<ffffffff814b7704>] kernel_thread_helper+0x4/0x10
[  848.688324]  [<ffffffff814af534>] ? retint_restore_args+0x13/0x13
[  848.695530]  [<ffffffff8105affb>] ? __init_kthread_worker+0x5b/0x5b
[  848.702929]  [<ffffffff814b7700>] ? gs_change+0x13/0x13
[  848.709155] Code: 00 00 48 8d 88 38 04 00 00 44 8b 80 84 02 00 00 31 c0 e8 cf 1b 24 00 41 83 c8 ff 44 8b 4b 08 48 c7 c1 e0 0b 7d 81 4d 85 e4 74 10 <45> 8b 84 24 84 02 00 00 49 8d 8c 24 38 04 00 00 8b 53 04 48 89
[  848.732467] RIP  [<ffffffff8126a68c>] spin_dump+0x5e/0x8c
[  848.738905]  RSP <ffff8807f868dca0>
[  848.743743] ---[ end trace 143161646eee8caa ]---

...so arrange for the ata_port to have the same end of life as the domain
device.

Reported-by: Marcin Tomczak <marcin.tomczak@intel.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:22:25 -06:00
Dan Williams
7d05919aad [SCSI] libsas: mark all domain devices gone if root port disappears
If the top level expander is hot removed, mark all child devices as gone
before unregistration to short circuit futile recovery.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:20:55 -06:00
Dan Williams
45c73b6519 [SCSI] libsas: pre-clean commands that won the eh vs completion race
When scrolling forward through the eh list (in a clear_q scenario) it is
possible to encounter commands that won the completion vs eh race.  Rather
than sprinkle more "if (!task)" throughout the handler just make a pass
through the list and delete the race winners before handling the rest.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:20:01 -06:00
Arnd Bergmann
a26d3c4fcd Merge branch 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
* 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix L4_EMU_34XX_BASE error after iomap changes
  ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers
  ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
  ARM: OMAP2+: Move most of plat/io.h into local iomap.h
  ARM: OMAP1: Move most of plat/io.h into local iomap.h
  ARM: OMAP1: Move 16xx GPIO system clock to platform init code
  ARM: OMAP: Move omap_init_consistent_dma_size() to local common.h
  ARM: OMAP2+: Move SDRC related functions from io.h into local common.h
  ARM: OMAP2+: Drop DISPC L3 firewall code
  ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path
  ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config

(update to latest rmk/for-arm-soc branch)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-29 21:18:13 +00:00
Dan Williams
5a99832829 [SCSI] isci: remove IDEV_EH hack to disable "discovery-time" ata resets
Prior to commit 61aaff49 "isci: filter broadcast change notifications
during SMP phy resets" we borrowed the MVS_DEV_EH approach from the
mvsas driver for preventing ->lldd_I_T_nexus_reset() events during ata
discovery.  This hack was protecting against the old ->phy_reset() in
ata_bus_probe(), but since the conversion to the new error handling this
hack is preventing resets from reaching ata devices.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:16:52 -06:00
Dan Williams
6a719391e4 [SCSI] isci: remove bus and reset handlers
Remove ->eh_device_reset_handler() and ->eh_bus_reset_handler() for the
same reason they are not implemented for libata hosts, they cannot be
implemented reliably with ata-eh.  ATA error recovery wants to divert
all resets to the eh thread and wait for completion, these handlers may
be invoked from a non-blocking ioctl.

The other path they are called from is libsas-eh, and if we escalate
past I_T_nexus reset we have larger problems i.e. tear down all
in-flight commands in the domain potentially without notification to the
lldd if it has chosen not to implement ->lldd_clear_nexus_port() /
->lldd_clear_nexus_ha().

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:16:05 -06:00
Dan Williams
687833a03b [SCSI] isci: ->lldd_ata_check_ready handler
Report to libata whether the link to the given domain_device is up and the
signature fis has been received.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:15:07 -06:00
Dan Williams
43a5ab151f [SCSI] isci: stop interpreting ->lldd_lu_reset() as an ata soft-reset
Driving resets from libsas-eh is pre-mature as libata will make a
decision about performing a softreset.  Currently libata determines
whether to perform a softreset based on ata_eh_followup_srst_needed(),
and none of those conditions apply to isci.

Remove the srst implementation and translate ->lldd_lu_reset() for ata
devices as a request to drive a reset via libata-eh.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:13:40 -06:00
Dan Williams
9277699121 [SCSI] isci: fix interpretation of "hard" reset
A hard reset to isci in the direct-attached case is one where the driver
internally manages debouncing the link.  In the sas-expander-attached
case a hard reset is one that clears affiliations.  The driver should
not be prematurely dropping affiliations at run time, that decision (to
force expander hard resets to ata devices) is left to userspace to
manage.  So, arrange for I_T_nexus resets to be sas-link-resets in the
expander-attached case and isci-hard-resets in the direct-attached case.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:11:54 -06:00
Dan Williams
fca4ecbdc4 [SCSI] isci: kill isci_port->status
It only tracks whether the port is stopping in order to gate new devices
being discovered while the port is stopping.  However, since the check
and subsequent handling is unlocked there is nothing to stop the port
from going down immediately after the check.

Driver is already prepared to handle devices arriving on stale ports,
and those will be cleaned up by an eventual ->lldd_dev_gone()
notification.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:11:19 -06:00
Dan Williams
c132f69208 [SCSI] isci: kill iphy->isci_port lookups
This field is a holdover from the OS abstraction conversion.  The stable
phy to port lookups are done via iphy->ownining_port under scic_lock.
After this conversion to use port->lldd_port the only volatile lookup is
the initial lookup in isci_port_formed().  After that point any lookup
via a successfully notified domain_device is guaranteed to be valid
until the domain_device is destroyed.

Delete ->start_complete as it is only set once and is set as a
consequence of the port going link up, by definition of getting a port
formed event the port is "ready".

While we are correcting port lookups also move the asd_sas_port table
out from under the isci_port.  This is to preclude any temptation to use
container_of() to convert an asd_sas_port to an isci_port, the
association is dynamic and under libsas control.

Tested-by: Maciej Trela <maciej.trela@intel.com>
[dmilburn@redhat.com: fix i686 compile error]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:05:05 -06:00
Arnd Bergmann
235ecf4c59 Merge branch 'omap1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards
* 'omap1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  input: serio: ams-delta: toggle keyboard power over GPIO
  omapfb: lcd_ams_delta: drive control lines over GPIO
  MTD: NAND: ams-delta: use GPIO instead of custom I/O
  LED: drop leds-ams-delta driver
  ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio
  ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio
  ARM: OMAP1: ams-delta: register latch dependent devices later
2012-02-29 21:05:03 +00:00
John W. Linville
c288ec614e carl9170: fix breakage from "mac80211: handle non-bufferable MMPDUs correctly"
That commit intended for 3.4 renamed IEEE80211_TX_CTL_POLL_RESPONSE as
IEEE80211_TX_CTL_NO_PS_BUFFER.  Meanwhile, "carl9170: fix frame delivery
if sta is in powersave mode" added a reference to
IEEE80211_TX_CTL_POLL_RESPONSE in the fixes stream for 3.3.  This simple
patch fixes that merge boo-boo.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29 15:08:33 -05:00
Daniel Vetter
c3dfefa0a6 drm/i915: reenable gmbus on gen3+ again
With the rework to merge the bit-banging fallback into the gmbus
i2c adapter we've gotten rid of the deadlock possibility that
originally lead to the disabling of this code.

This reverts the revert

commit 826c7e4147
Author: Jean Delvare <khali@linux-fr.org>
Date:   Sat Jun 4 19:34:56 2011 +0000

    Revert "drm/i915: Enable GMBUS for post-gen2 chipsets"

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=35572
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-29 20:54:14 +01:00
Daniel Vetter
f6f808c8e1 drm/i915: i2c: unconditionally set up gpio fallback
This way we can simplify the setup and teardown a bit.

Because we don't actually allocate anything anymore for the force_bit
case, we can now convert that into a boolean.

Also and the functionality supported by the bit-banging together with
what gmbus can do, so that this doesn't randomly change any more.

v2: Chris Wilson noticed that I've mixed up && and & ...

v3: Clarify an if block as suggested by Eugeni Dodonov.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-29 20:53:36 +01:00