Commit graph

153,333 commits

Author SHA1 Message Date
Alexander Duyck
f990b79bc8 ixgbe: Let the Rx buffer allocation clear status bits instead of cleanup
This change makes it so that we always clear the status/error bits in the
Rx descriptor in the allocation path instead of the cleanup path.  The
advantage to this is that we spend less time modifying data.  As such we
can modify the data once and then let it go cold in the cache instead of
writing it, reading it, and then writing it again.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-10 15:49:14 -08:00
Alexander Duyck
1d2024f61e ixgbe: Address fact that RSC was not setting GSO size for incoming frames
This patch is meant to address the fact that RSC has not been setting the
gso_size value on the skb.  As a result performance on lossy TCP
connections was negatively impacted.  This change resolves the issue by
setting gso_size to the average size for incoming packets.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-10 15:44:19 -08:00
Alexander Duyck
4c1975d77b ixgbe: Minor refactor of RSC
This change addresses several issue.

First I had left the use of the next and prev skb pointers floating around
in the code and they were overdue to be pulled since I had rewritten the
RSC code in the out-of-tree driver some time ago to address issues brought
up by David Miller in regards to this.

I am also now defaulting to always leaving the first buffer unmapped on any
packet and then unmapping it after we read the EOP descriptor.  This allows
a simplification of the path with less branching.

Instead of counting packets received the code was changed some time ago to
track the number of buffers received.  This leads to inaccurate counting
when you compare numbers of packets received by the hardware versus what is
tracked by the software.  To correct this I am revising things so that the
append_cnt value for RSC accurately tracks the number of frames received.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-10 15:42:09 -08:00
Sarah Sharp
3278a55a1a xhci: Fix oops caused by more USB2 ports than USB3 ports.
The code to set the device removable bits in the USB 2.0 roothub
descriptor was accidentally looking at the USB 3.0 port registers
instead of the USB 2.0 registers.  This can cause an oops if there are
more USB 2.0 registers than USB 3.0 registers.

This should be backported to kernels as old as 2.6.39, that contain the
commit 4bbb0ace9a "xhci: Return a USB 3.0
hub descriptor for USB3 roothub."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
2012-02-10 14:24:32 -08:00
Kenneth Graunke
d71de14ddf drm/i915: gen7: Disable the RHWO optimization as it can cause GPU hangs.
The BSpec Workarounds page states that bits 10 and 26 must be set to
avoid 3D ring hangs.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-10 14:19:17 -08:00
Eugeni Dodonov
db099c8f96 drm/i915: gen7: work around a system hang on IVB
This adds the workaround for WaCatErrorRejectionIssue which could result
in a system hang.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-10 14:19:14 -08:00
Eugeni Dodonov
e4e0c058a1 drm/i915: gen7: Implement an L3 caching workaround.
This adds two cache-related workarounds for Ivy Bridge which can lead to
3D ring hangs and corruptions.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-10 14:19:10 -08:00
Linus Torvalds
8df54d622a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Quoth David:

1) GRO MAC header comparisons were ethernet specific, breaking other
   link types.  This required a multi-faceted fix to cure the originally
   noted case (Infiniband), because IPoIB was lying about it's actual
   hard header length.  Thanks to Eric Dumazet, Roland Dreier, and
   others.

2) Fix build failure when INET_UDP_DIAG is built in and ipv6 is modular.
   From Anisse Astier.

3) Off by ones and other bug fixes in netprio_cgroup from Neil Horman.

4) ipv4 TCP reset generation needs to respect any network interface
   binding from the socket, otherwise route lookups might give a
   different result than all the other segments received.  From Shawn
   Lu.

5) Fix unintended regression in ipv4 proxy ARP responses, from Thomas
   Graf.

6) Fix SKB under-allocation bug in sh_eth, from Yoshihiro Shimoda.

7) Revert skge PCI mapping changes that are causing crashes for some
   folks, from Stephen Hemminger.

8) IPV4 route lookups fill in the wildcarded fields of the given flow
   lookup key passed in, which is fine most of the time as this is
   exactly what the caller's want.  However there are a few cases that
   want to retain the original flow key values afterwards, so handle
   those cases properly.  Fix from Julian Anastasov.

9) IGB/IXGBE VF lookup bug fixes from Greg Rose.

10) Properly null terminate filename passed to ethtool flash device
    method, from Ben Hutchings.

11) S3 resume fix in via-velocity from David Lv.

12) Fix double SKB free during xmit failure in CAIF, from Dmitry
    Tarnyagin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
  net: Don't proxy arp respond if iif == rt->dst.dev if private VLAN is disabled
  ipv4: Fix wrong order of ip_rt_get_source() and update iph->daddr.
  netprio_cgroup: fix wrong memory access when NETPRIO_CGROUP=m
  netprio_cgroup: don't allocate prio table when a device is registered
  netprio_cgroup: fix an off-by-one bug
  bna: fix error handling of bnad_get_flash_partition_by_offset()
  isdn: type bug in isdn_net_header()
  net: Make qdisc_skb_cb upper size bound explicit.
  ixgbe: ethtool: stats user buffer overrun
  ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state
  ixgbe: do not update real num queues when netdev is going away
  ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size
  ixgbe: Fix case of Tx Hang in PF with 32 VFs
  ixgbe: fix vf lookup
  igb: fix vf lookup
  e1000: add dropped DMA receive enable back in for WoL
  gro: more generic L2 header check
  IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses
  zd1211rw: firmware needs duration_id set to zero for non-pspoll frames
  net: enable TC35815 for MIPS again
  ...
2012-02-10 14:18:46 -08:00
Eugeni Dodonov
eae66b50c7 drm/i915: gen7: implement rczunit workaround
This is yet another workaround related to clock gating which we need on
Ivy Bridge.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-10 14:18:46 -08:00
Linus Walleij
77a5988355 pinctrl: changes hog mechanism to be self-referential
Instead of a specific boolean field to indicate if a map entry shall
be hogged, treat self-reference as an indication of desired hogging.
This drops one field off the map struct and has a nice Douglas R.
Hofstadter-feel to it.

Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-10 21:33:10 +01:00
Linus Walleij
befe5bdfbb pinctrl: factor pin control handles over to the core
This moves the per-devices struct pinctrl handles and device map
over from the pinmux part of the subsystem to the core pinctrl part.
This makes the device handles core infrastructure with the goal of
using these handles also for pin configuration, so that device
drivers (or boards etc) will need one and only one handle to the
pin control core.

Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-10 21:33:06 +01:00
Linus Walleij
e93bcee00c pinctrl: move generic functions to the pinctrl_ namespace
Since we want to use the former pinmux handles and mapping tables for
generic control involving both muxing and configuration we begin
refactoring by renaming them from pinmux_* to pinctrl_*.

ChangeLog v1->v2:
- Also rename the PINMUX_* macros in machine.h to PIN_ as indicated
  in the documentation so as to reflect the generic nature of these
  mapping entries from now on.

Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-10 21:33:02 +01:00
Linus Walleij
28a8d14cc7 pinctrl: break out a pinctrl consumer header
This breaks out a <linux/pinctrl/consumer.h> header to be used by
all pinmux and pinconfig alike, so drivers needing services from
pinctrl does not need to include different headers. This is similar
to the approach taken by the regulator API.

Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-10 21:32:57 +01:00
Yinghai Lu
3682a3946d PCI: Fix pci cardbus removal
During test busn_res allocation with cardbus, found pci card removal is not
working anymore, and it turns out it is broken by:

|commit 79cc9601c3
|Date:   Tue Nov 22 21:06:53 2011 -0800
|
|    PCI: Only call pci_stop_bus_device() one time for child devices at remove

The above changed the behavior of pci_remove_behind_bridge that
yenta_cardbus depended on.  So restore the old behavoir of
pci_remove_behind_bridge (which requires stopping and removing of all
devices) by:

1. rename pci_remove_behind_bridge to __pci_remove_behind_bridge, and let
   __pci_remove_bus_device() call it instead.
2. add pci_stop_behind_bridge that will stop devices behind a bridge
3. add back pci_remove_behind_bridge that will stop and remove devices
   under bridge.

-v2: update commit description a little bit.

Tested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-10 12:19:31 -08:00
Vaidyanathan Srinivasan
8161fe91d8 PCI: set pci sriov page size before reading SRIOV BAR
For an SRIOV device, PCI_SRIOV_SYS_PGSIZE should be set before
the PCI_SRIOV_BAR are queried.  The sys pagesize defaults to 4k,
so this change is required on powerpc box with 64k base page size.
    
This is a regression caused due to moving SRIOV init to sriov_enable().
    
| commit afd24ece5c
| Author: Ram Pai <linuxram@us.ibm.com>
    
| PCI: delay configuration of SRIOV capability
| The SRIOV capability, namely page size and total_vfs of a device are
| configured during enumeration phase of the device.  This can potentially
| interfere with the PCI operations of the platform, if the IOV capability
| of the device is not enabled.
    
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-10 12:01:56 -08:00
Lee Jones
74d1d82cda drivers/base: add bus for System-on-Chip devices
Traditionally, any System-on-Chip based platform creates a flat list
of platform_devices directly under /sys/devices/platform.

In order to give these some better structure, this introduces a new
bus type for soc_devices that are registered with the new
soc_device_register() function.  All devices that are on the same
chip should then be registered as child devices of the soc device.

The soc bus also exports a few standardised device attributes which
allow user space to query the specific type of soc.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 11:42:25 -08:00
Yinghai Lu
71f6bd4a23 PCI: workaround hard-wired bus number V2
Fixes PCI device detection on IBM xSeries IBM 3850 M2 / x3950 M2
when using ACPI resources (_CRS).
This is default, a manual workaround (without this patch)
would be pci=nocrs boot param.

V2: Add dev_warn if the workaround is hit. This should reveal
how common such setups are (via google) and point to possible
problems if things are still not working as expected.
-> Suggested by Jan Beulich.

Cc: stable@vger.kernel.org
Tested-by: garyhade@us.ibm.com
Signed-off-by: Yinghai Lu <yinghai.lu@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-10 11:34:42 -08:00
Florian Tobias Schandinat
532f9169db viafb: make single framebuffer multiple adapter mode work
This patch implementes this mode (viafb_SAMM_ON set and
viafb_dual_fb not set) in a useful way for CRT and DVI devices.
The same content is shown on both devices in different video modes.
The first (primary) resolution must not be bigger than the secondary
one and determines the visible region. The same content is shown
centered on the secondary output.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-10 19:28:39 +00:00
Florian Tobias Schandinat
561c9079ea viafb: fill xres and yres
This patch fills xres and yres in var which is required when a
temporary var is genereated when viafb_SAMM_ON is set and
viafb_dual_fb is not set. It also removes an obsolete comment.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-10 19:28:39 +00:00
Florian Tobias Schandinat
e0e12a9282 viafb: set correct polarity for second adapter
This patch sets the correct polarity for the second adapter when
viafb_SAMM_ON is set and viafb_dual_fb is not set. Just one step to
make this mode useful.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-10 19:28:37 +00:00
Bjørn Mork
8804420275 usb: cdc-wdm: make reset work with blocking IO
Add a flag to tell wdm_read/wdm_write that a reset is in progress,
and wake any blocking read/write before taking the mutexes.  This
allows the device to reset without waiting for blocking IO to
finish.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 11:28:18 -08:00
Greg Kroah-Hartman
7483948fdd Merge tag 'usb-3.3-rc3' into usb-next
This is done to resolve a merge conflict with:
	drivers/usb/class/cdc-wdm.c
and to better handle future patches for this driver as it is under
active development at the moment.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 11:13:53 -08:00
Florian Tobias Schandinat
e75892715d viafb: add auxiliary device management infrastructure
This patch adds the basic infrastructure and a few stub drivers for
devices that are connected via I2C busses. The infrastructure will
be used to replace and extend the support that is scattered
throughout viafb. The stub drivers are not very useful yet but they
show how the infrastructure works, provide information about the
chips integrated into a system and maybe gather some testers as it
would be very difficult for a single person to get a sane test
environment.
The only thing this actually does is probing the I2C busses which
will hopefully not cause any regressions.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-10 19:11:51 +00:00
Greg Kroah-Hartman
b91867f2ee Merge tag 'staging-3.3-rc3' into staging-next
This was done to resolve some merge issues with the following files that
had changed in both branches:
	drivers/staging/rtl8712/rtl871x_sta_mgt.c
	drivers/staging/tidspbridge/rmgr/drv_interface.c
	drivers/staging/zcache/zcache-main.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:58:25 -08:00
Paul Gortmaker
6816383a09 tty: sparc: rename drivers/tty/serial/suncore.h -> include/linux/sunserialcore.h
There are multiple users of this file from different source
paths now, and rather than have ../ paths in include statements,
just move the file to the linux header dir.

Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:44:35 -08:00
Greg Kroah-Hartman
5a22e30def Merge tag 'tty-3.3-rc3' tty-next
This is needed to handle the 8250 file merge mess properly for future
patches.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:25:27 -08:00
Johan Hovold
22a416c4e0 USB: serial: use dev_err_console in custom write paths
Use dev_err_console in write paths for devices which can be used as a
console but do not use the generic write implementation.

Compile-only tested.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:21:04 -08:00
Johan Hovold
f1475a00a1 USB: serial: use dev_err_console in generic write
Use dev_err_console in write path so that an error at least gets
reported once.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:21:04 -08:00
Johan Hovold
548dd4b6da USB: serial: fix console error reporting
Do not report errors in write path if port is used as a console as this
may trigger the same error (and error report) resulting in a loop.

Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:20:36 -08:00
Mark A. Allyn
9196dc1129 staging: sep: reworked crypto layer
This gets the SEP crypto layer up and running with things like dmcrypt.
It's a fairly big set of changes because it has to rework the whole context
handling system.

[This is picked out of the differences between the upstream driver and
 the staging driver. I'm resolving the differences as a series of updates -AC]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:09:58 -08:00
Mark A. Allyn
ab8ef35131 staging: sep: NULL out pointers, mark debug code DEBUG to fix warnings
[This is picked out of the differences between the upstream driver and
 the staging driver. I'm resolving the differences as a series of updates -AC]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:09:58 -08:00
Mark A. Allyn
ecd0cb003f staging: sep: update initialisation
In particular we want to always do the reconfigure

[This is picked out of the differences between the upstream driver and
 the staging driver. I'm resolving the differences as a series of updates -AC]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:09:57 -08:00
Mark A. Allyn
6ab80c2608 staging: sep: Add interfaces for the new functions
[This is picked out of the differences between the upstream driver and
 the staging driver. I'm resolving the differences as a series of updates -AC]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:09:57 -08:00
Mark A. Allyn
aca58ec828 staging: sep: Basic infrastructure for SEP DMA access to non CPU regions
[This is picked out of the differences between the upstream driver and
 the staging driver. I'm resolving the differences as a series of updates -AC]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:09:57 -08:00
Mark A. Allyn
ffcf12810c staging: sep: Add new PCI identifier
[This is picked out of the differences between the upstream driver and
 the staging driver. I'm resolving the differences as a series of updates -AC]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:09:56 -08:00
John Stultz
2157f89677 staging: android-alarm: Support old drivers via preprocessor aliasing
Older out of tree drivers that were desgined to the Android Alarm
in-kernel API may not build due to the namespace collision fixed in
an earlier patch. Per Arve's suggestion, this patch provides
preprocessor macros that allow older drivers to build.

CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:08:01 -08:00
John Stultz
7f9b98a39b staging: android-alarm: Fixup minor pr_alarm warnings
This patch fixes the following warnings:

drivers/staging/android/alarm.c: In function ‘alarm_timer_triggered’:
drivers/staging/android/alarm.c:344: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘long int’
drivers/staging/android/alarm.c:367: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘long int’

CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:08:01 -08:00
JP Abgrall
f2d3c6898a staging: android-alarm: Fix bad index when canceling alarms[]
It was using ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK as an
index.

CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
CC: JP Abgrall <jpa@google.com>
Change-Id: I919860cc71254453e382616bce9fd5455802cb3d
Signed-off-by: JP Abgrall <jpa@google.com>
[jstultz: Tweaked commit subject]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:08:01 -08:00
Arve Hjønnevåg
66c4810771 staging: android-alarm: Update hrtimer if alarm at the head of the queue is reprogrammed
If an alarm was restarted with a value that moved it away from the head
of a queue, the hrtimer would not be updated. This would cause unnecessary
wakeups.

CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Change-Id: If379f8dd92b0bdb3173bd8d057adfe0dc1d15259
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:08:00 -08:00
Praneeth Kumar Bajjuri
58a38ff3b1 staging: android-alarm: Disable Android alarm driver by default
Do not enable Android alarm driver by default

CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
CC: Praneeth Bajjuri <praneeth@ti.com>
Change-Id: Iff8f7a65c4eceecfd084074937c72824697b5e7f
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
[jstultz: tweaked commit subject & msg]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:08:00 -08:00
John Stultz
fe8d2727ff staging: android-alarm: Reenable android alarm driver
Now that it builds, re-enable android alarm driver in
the makefile and kconfig

CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:06:43 -08:00
John Stultz
79ef07162f staging: android-alarm: HACK: wakelock workaround
Allow Android alarmtimer device to build while wakelocks are still
out of tree.

CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:06:19 -08:00
John Stultz
f2f28eacf2 staging: android-alarm: Fix namespace collision with upstreamed alarmtimers
The upstreamed alarmtimers are similar but not quite 100% API
compatibile with the android in-kernel alarm api. To aid the
transition, prefix the the android in-kernel api with android_

CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:06:19 -08:00
John Stultz
d47908b20c staging: android-alarm: Fix include compile issues
The file asm/mach/time.h doesn't exist on all arches,
so include <linux/time.h>. Also linux/sysdev.h is gone
so kill it.

CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:06:19 -08:00
Andy Green
bf647ea717 staging: android-alarm: Add needed module.h includes
Add module.h includes required to build

CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
CC: Andy Green <andy.green@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
[jstultz: Tweaked commit subject, folded two patches
into one]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:06:18 -08:00
Arve Hjønnevåg
5dd12c29b4 staging: android-alarm: Don't use save_time_delta.
Remove references to non-existant save_time_delta.

Change-Id: Iaefeca497de02fe36b7f5d79075912f6e349ec53
CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
[Added commit message -jstultz]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:06:18 -08:00
Arve Hjønnevåg
841cb11c6f staging: android-alarm: Add android alarm driver & in-kernel alarm interface
Drivers can now create alarms that will use an hrtimer while the
system is running and the rtc to wake up from suspend.

CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
[Fold and move alarm driver and interface to staging,
 fix whitespace issue, drop kconfig & make file changes
 as it currently doesn't build  -jstultz]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 10:05:42 -08:00
Gerard Ryan
242501ce5d Staging: bcm: fix CodingStyle warnings/errors reported by checkpatch.pl in led_control.h
This is a patch to the led_control.h file that fixes numerous warnings
and errors reported by the checkpatch.pl tool. There still remain a few
more, but as this is my first attempt at a commit, I'm not going to be
too adventurous!

Signed-off-by: Gerard Ryan <gerard@ryan.lt>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 09:58:52 -08:00
Larry Finger
073863432f staging: r8712u: Add missing initialization and remove configuration parameter CONFIG_R8712_AP
When this driver was upgraded to the vendor 20100831 version in
commit 93c55dda09 et al,, one listhead initialization was missed.
This broke complete operation of the driver whenever AP mode was
enabled. This fixes https://bugs.archlinux.org/task/27996.

The configuration parameter R8712_AP is misleading as the driver cannot
function as an AP without a heavily hacked version of hostapd. Thus, it
makes sense to remove the parameter; however the code and data configured
for the option is left in.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 09:57:28 -08:00
Peter Huewe
c3b3b3f9b0 staging/xgifb: remove remaining duplicate initdef.h defines
This patch removes the remaining defines that are already defined
identically in the sis initdef.h header.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 09:56:25 -08:00