Commit graph

153,333 commits

Author SHA1 Message Date
Tim Gardner
3d86b93064 rtlwifi: Fix PCI probe error path orphaned memory
Memory allocated by ieee80211_alloc_hw() will get orphaned
if any subsequent initializations fail.

Also don't pci_set_drvdata(pdev, NULL) until just before disabling
the PCI device. Functions called by rtl_deinit_core(hw) may eventually need
the context (when its actually implemented).

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Chaoming Li <chaoming_li@realsil.com.cn>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:55:52 -05:00
Amitkumar Karwar
3dc5e17518 mwifiex: enable HT operating mode
This patch sets default adapter channel_type as HT. Hence the device
will opearate in HT mode.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:55:51 -05:00
Amitkumar Karwar
477778bb0e mwifiex: fix NULL pointer dereference in set_channel()
In set_channel() callback handler, "priv" pointer is derived from
net_device. Sometimes net_device pointer coming from the stack
is NULL which causes kernel crash.
This patch fixes the problem by deriving "priv" from wiphy
when net_device pointer is NULL.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:55:50 -05:00
Yogesh Ashok Powar
197a4e4e1f mwl8k: Remove BSSID from the firmware when the BSS is stopped
Using command DEL_MAC_ADDR, remove the mac address of the BSS
when it is stopped i.e the corresponding vif is removed. Without
this, the stale bss entry will still be maintained in the firmware
which causes issues when the BSS's are recreated.

Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:55:42 -05:00
Dan Carpenter
291689fcfb ath9k: cleanup a min_t() cast
If the firmware was over 2G, it would cause memory corruption and the
system would die here.  Obviously we all know the firmware isn't going
to be that large but static checkers get upset.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:55:42 -05:00
Hauke Mehrtens
d486a5b499 ssb: add support for bcm5354
This patch adds support the the BCM5354 SoC.
It has a PMU and a constant not configurable clock.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:55:36 -05:00
Hauke Mehrtens
bedb2a18af ssb: log the id, rev and pkg of the chip found
This makes us see what type of hardware someone uses by the dmesg
output.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:53:11 -05:00
Hauke Mehrtens
f0d4724b2a bcma: log the id, rev and pkg of the chip found
This makes us see what type of hardware someone uses by the dmesg
output.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:53:11 -05:00
Larry Finger
3eda95de19 rtlwifi: Remove extra debugging message accidentally left in
In commit b0302aba81, an extra debugging
message that is spamming the logs was not deleted before submission.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:53:09 -05:00
Masanari Iida
5aff4e74dc rtlwifi: Fix typo in dm.c
Correct a spelling "disconnet" to "disconnect" in
drivers/net/wireless/rtlwifi/rtl8192de/dm.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:53:08 -05:00
Masanari Iida
f3e1b97f03 iwmc3200wifi: Fix typo in trace.h
Correct spelling "embeded" to "embedded" in
drivers/net/wireless/iwmc3200wifi/trace.h

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:53:07 -05:00
Devendra.Naga
1d73c51a84 rtlwifi: remove return in _rtl_pci_switch_clk_req
the return value from _rtl_pci_switch_clk_req is not used by any of its callers.

Signed-off-by: Devendra.Naga <devendra.aaru@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:53:07 -05:00
Hauke Mehrtens
d6865dcc58 bcma: add extra sprom check
This check is needed on the BCM43224 device as it says in the
capabilities it has an sprom but is extra check says it has not.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:53:06 -05:00
Hauke Mehrtens
8f9ada4fa1 bcma: add bus num counter
If we have two bcma buses on one computer the second will not work
without this patch. Now each bus gets an own number.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:53:05 -05:00
Hauke Mehrtens
49dc957715 bcma: add PCIe host controller
Some SoCs have a PCIe host controller to make it possible to attach
some other devices to it, like an other Wifi card.
This code was tested with an Netgear WNDR3400 (bcm4716 based), but
should work with all bcma based SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:53:04 -05:00
Hauke Mehrtens
d1a7a8e1d3 bcma: make some functions __devinit
bcma_core_pci_hostmode_init() has to be in __devinit as it will call a
function in that section and so all functions calling it also have to
be in __devinit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:53:03 -05:00
Hauke Mehrtens
4b259a5cc5 bcma: export bcma_pcie_read()
This will be needed by the host controller.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:53:02 -05:00
Hauke Mehrtens
2be25cac84 bcma: add constants for PCI and use them
There are many magic numbers used in the PCIe code. Replace them with
some constants from the Broadcom SDK and also use them in the pcie host
controller.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:52:56 -05:00
Hauke Mehrtens
5f2d6171e1 bcma: add the core unit number
Some SoCs have two pcie or gmac cores and we need to know the number of
the specific core on the bus. This is the case for the BCM4706.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:50:39 -05:00
Stanislaw Gruszka
268bd858df rt2800: document RF_R03 register bits [7:4]
Taken from:
2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO
(based on function RT33xx_ChipSwitchChannel)

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:50:39 -05:00
Stanislaw Gruszka
f1f12f9894 rt2800: radio 3xxxx: channel switch RX/TX calibration fixes
Synchronize code with Ralink driver:
2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO
Based on functions:
RT30xx_ChipSwitchChannel
RT33xx_ChipSwitchChannel
NICInitRT3370RFRegisters
and defines from:
include/chip/rt33xx.h

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:50:39 -05:00
Stanislaw Gruszka
3e0c7643c5 rt2800: radio 3xxx: add channel switch calibration routines
Synchronize code with Ralink driver:
2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO
Based on functions:
RT33xx_ChipSwitchChannel
RT30xx_ChipSwitchChannel

Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:50:38 -05:00
Stanislaw Gruszka
e3bab19762 rt2800: radio 3xxx: program RF_R1 during channel switch
Synchronize code with Ralink driver:
2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO
Based on functions:
RT33xx_ChipSwitchChannel
RT30xx_ChipSwitchChannel
RT33xx_Init

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:50:38 -05:00
Stanislaw Gruszka
7f4666ab3f rt2800: radio 3xxx: reprogram only lower bits of RF_R3
Synchronize code with Ralink driver:
2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO
(functions: RT33xx_ChipSwitchChannel() and RT30xx_ChipSwitchChannel())

Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:50:38 -05:00
Masanari Iida
5718b134b1 net: Fix typo in ipw2x00/libipw_rx.c
Correct spelling in "suppported" to "supported" in
drivers/net/wireless/ipw2x00/libipw_rx.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:50:38 -05:00
John W. Linville
8f0bb5ae3c Merge branch 'wireless-next' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi 2012-02-06 14:45:53 -05:00
John W. Linville
b9d9057847 Merge branch 'for-linville' of git://github.com/kvalo/ath6kl 2012-02-06 14:45:07 -05:00
Thadeu Lima de Souza Cascardo
7e2eb99cc6 mlx4: fix DMA mapping leak when allocation fails
mlx4_en_prepare_rx_desc does not correctly clean up after it finds an
allocation failure. It should unmap a page before calling put_page, but
it only calls the later.

This bug would prevent a device removal using hotplug after setting the
device MTU to 9000 and opening the network interface. After the fix, we
still see the allocation failure with MTU 9000, but we are able to
remove the device.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06 14:42:28 -05:00
Thadeu Lima de Souza Cascardo
68355f7113 mlx4: allow device removal by fixing dma unmap size
After opening the network interface, Mellanox ConnectX device cannot be
removed by hotplug because it has not properly unmapped all DMA memory.

It happens that mlx4_en_activate_rx_rings overrides the variable that
keeps the size of the memory mapped.

This is fixed by passing to mlx4_en_destroy_rx_ring the same size that is
given to mlx4_en_create_rx_ring.

After applying this patch, hot unplugging the device works after opening
the interface.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06 14:42:28 -05:00
Henrik Rydberg
2e6b411971 bcma: don't fail for bad SPROM CRC
The brcmsmac driver is now using the bcma SPROM CRC check, which does
not recognize all chipsets that were functional prior to the switch. In
particular, the current code bails out on odd CRC errors in recent
Macbooks. This patch ignores those errors, with the argument that an
unrecognized SPROM should be treated similarly to a non-existing one.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:37:52 -05:00
John W. Linville
8926574c4d Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	drivers/net/wireless/rtlwifi/rtl8192se/sw.c
2012-02-06 14:26:39 -05:00
Mark Brown
028a01e601 regmap: Add debugfs information for the cache status
Show all the cache status flags in debugfs if we have a cache.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-06 19:24:46 +00:00
Mark Brown
847fb6fdf5 regmap: Don't use bitfields for booleans
This was a cut'n'paste from some older code.

Since we're about to add debugfs support don't do the obvious thing and
use bool, use u32 instead (which debugfs has been using since time
immemorial).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-06 19:24:35 +00:00
Eugenia Emantayev
4c41b36737 mlx4_core: use correct port for steering
Use port number for correct steering (list per port).
Before the fix all steering entries (for both physical ports)
were managed in first port structures, so we had leakage of resources
for port 2.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06 12:10:11 -05:00
Eugenia Emantayev
4df9950406 mlx4_core: use correct flag for unicast_promisc
Use MLX4_DEV_CAP_FLAG_VEP_UC_STEER for unicast_promisc_add/remove
Unicast entries were managed in wrong data structures.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06 12:10:11 -05:00
Eugenia Emantayev
f08ad06c05 mlx4_core: fix memory leak at multi_func_cleanup
Perform cleanup also in non-master flow.
The VFs use communication channel as well.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06 12:10:11 -05:00
Jesper Juhl
715252d419 IB/srpt: Don't return freed pointer from srpt_alloc_ioctx_ring()
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-06 08:57:11 -08:00
Pradeep A Dalvi
c056b734e5 netdev: ethernet dev_alloc_skb to netdev_alloc_skb
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet
  - Removed extra skb->dev = dev after netdev_alloc_skb

Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06 11:52:27 -05:00
Pradeep A Dalvi
21a4e46995 netdev: ethernet dev_alloc_skb to netdev_alloc_skb
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet
  - Removed extra skb->dev = dev after netdev_alloc_skb

Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06 11:48:09 -05:00
Pradeep A Dalvi
1d26643054 netdev: ethernet dev_alloc_skb to netdev_alloc_skb
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet
  - Removed extra skb->dev = dev after netdev_alloc_skb

Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06 11:41:20 -05:00
Axel Lin
da7de6a161 regulator: Show correct chip id for max8649
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-06 16:38:18 +00:00
Axel Lin
0c3d0b20cf regulator: Remove redundant regmap_update_bits call for TPS65023_REG_CON_CTRL2
This looks like a merge mistake.  Calling regmap_update_bits once is enough.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-06 16:38:18 +00:00
Jiri Kosina
2701eaabd7 HID: tivo: fix broken build
Fix mismatch between Kconfig name and Makefile expectation.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-06 17:36:38 +01:00
Jarod Wilson
44ea35c138 HID: add support for tivo slide remote
This patch finishes off adding full support for the TiVo Slide remote,
which is a mostly pure HID device from the perspective of the kernel.
There are a few mappings that use a vendor-specific usage page, and a
few keys in the consumer usage page that I think make sense to remap
slightly, to better fit their key labels' intended use. Doing this in a
stand-alone hid-tivo.c makes the modifications only matter for this
specific device.

What's actually connected to the computer is a Broadcom-made usb dongle,
which has an embedded hub, bluetooth adapter, mouse and keyboard
devices. You pair with the dongle, then the remote sends data that its
converted into HID on the keyboard interface (the mouse interface
doesn't do anything interesting, so far as I can tell).

lsusb for this device:
Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp.
Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp.
Bus 004 Device 003: ID 150a:1201
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)

Speaking of the keyboard interface, the remote actually does contain a
keyboard as well. The top slides away, revealing a reasonably functional
qwerty keyboard (not unlike many slide cell phones), thus the product
name.

CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-06 17:35:03 +01:00
Felix Fietkau
55a2bb4a6d ath9k_hw: fix a RTS/CTS timeout regression
commit adb5066 "ath9k_hw: do not apply the 2.4 ghz ack timeout
workaround to cts" reduced the hardware CTS timeout to the normal
values specified by the standard, but it turns out while it doesn't
need the same extra time that it needs for the ACK timeout, it
does need more than the value specified in the standard, but only
for 2.4 GHz.

This patch brings the CTS timeout value in sync with the initialization
values, while still allowing adjustment for bigger distances.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 11:34:02 -05:00
Felix Fietkau
f88373fa47 ath9k: fix a WEP crypto related regression
commit b4a82a0 "ath9k_hw: fix interpretation of the rx KeyMiss flag"
fixed the interpretation of the KeyMiss flag for keycache based lookups,
however WEP encryption uses a static index, so KeyMiss is always asserted
for it, even though frames are decrypted properly.
Fix this by clearing the ATH9K_RXERR_KEYMISS flag if no keycache based
lookup was performed.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Reported-by: Laurent Bonnans <bonnans.l@gmail.com>
Reported-by: Jurica Vukadin <u.ra604@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 11:34:02 -05:00
Amitkumar Karwar
2da8cbf8a6 mwifiex: add NULL checks in driver unload path
If driver load is failed, sometimes few pointers may remain
uninitialized ex. priv->wdev, priv->netdev, adapter->sleep_cfm
This will cause NULL pointer dereferance while unloading the
driver.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 11:34:02 -05:00
Przemo Firszt
d7cb3dbd10 HID: wacom: Fix invalid power_supply_powers calls
power_supply_powers calls added in 35b4c01e2 ("power_supply: add "powers" links
to self-powered HID devices") have to be called after power device is created.
This patch also fixes the second call - it has to be "ac" instead of "battery"

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-06 16:14:20 +01:00
Jiri Kosina
d4730ace0c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into upstream-fixes
Sync with Linus' tree. This is necessary to have a base for
patch that fixes commit 35b4c01e29 ("power_supply: add "powers"
links to self-powered HID devices") which went in through Anton's
tree.
2012-02-06 16:12:16 +01:00
Felipe Balbi
2e81c36a00 usb: dwc3: gadget: allocate 3 packets for bulk and isoc endpoints
Those transfer types are generally high bandwidth, so we
want to optimize transfers with those endpoints.

For that, databook suggests allocating 3 * wMaxPacketSize
of FIFO. Let's do that.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 17:06:12 +02:00