Commit graph

153,333 commits

Author SHA1 Message Date
Greg Kroah-Hartman
e9c688a327 driver core: remove drivers/base/sys.c and include/linux/sysdev.h
Now that all users of 'struct sysdev' are removed from the kernel, we
can safely remove the .h and .c files for this code, to ensure that no
one accidentally starts to use it again.

Many thanks for Kay who did all the hard work here on making this
happen.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-22 14:31:15 -07:00
Russell King
0af5e4c36e MFD: ucb1x00-ts: fix resume failure
If the ucb1x00 touchscreen is resumed while the touchscreen is being
touched, the main thread stops responding.  This occurs because two
things happen:

1. When we suspended, we were woken up, and executed the loop.
   Finding that the touchscreen was not pressed, we prepare to
   schedule for a maximum timeout, before being stopped in
   try_to_freeze().

2. an irq occurs, we disable the irq, and mark it as disabled,
   and wake the thread.  This wake occurs while the thread is
   still within __refrigerator()

3. The thread is unfrozen, and __refrigerator() sets the threads
   state back to INTERRUPTIBLE.

We then drop into schedule_timeout() with an infinite timeout and the
IRQ disabled.  This prevents any further screen touches activating
the thread.

Fix this by using kthread_freezable_should_stop() which handles the
freezing issues for us outside of the hotspot where the task state
matters.  Include a flag to ignore the touchscreen until it is
released to avoid sending unintended data to the application.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-22 21:10:40 +00:00
Randy Dunlap
af58f1d628 kernel-doc: fix new warning in net/phy/mdio_bus.c
Fix new kernel-doc warning:

Warning(drivers/net/phy/mdio_bus.c:49): No description found for parameter 'size'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:45 -05:00
Sathya Perla
df505eb804 be2net: create RSS rings even in multi-channel configs
Currently RSS rings are not created in a multi-channel config.
RSS rings can be created on one (out of four) interfaces per port in a
multi-channel config. Doing this insulates the driver from a FW bug wherin
multi-channel config is wrongly reported even when not enabled. This also
helps performance in a multi-channel config, as one interface per port gets
RSS rings.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:45 -05:00
stephen hemminger
d0249e4443 skge: check for PCI dma mapping errors
Driver should check for mapping errors.
Machines with limited DMA maps may return an error when a PCI map is
requested (not an issue on standard x86).

Also use upper/lower 32 bits macros for clarity.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:44 -05:00
stephen hemminger
19f9ad7893 skge: don't assert carrier until link is up
Skge device would assert carrier (link up) as soon as network device open
was called, rather than waiting until PHY has detected link.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:44 -05:00
Marcel Apfelbaum
803143fbda mlx4_core: map async events to arbitrary slave eqs
Slave async events were mapped to single eq. This patch fixes this issue, so
the slaves can map the async events to any eq.

Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:44 -05:00
Marcel Apfelbaum
9fd7a1e147 mlx4_core: Fix mtt profile issue
Num mtts from profile is really the number of mtt segments.
Thus, in make profile, to get the proper number of MTT entries,
must multiply num_mtts by mtts per segment.

Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:44 -05:00
Marcel Apfelbaum
eb41049f2f mlx4_core: removed function index from vf.
The Virtual Functions should not be aware their function number.

Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:43 -05:00
Eugenia Emantayev
93ece0c1a7 mlx4_en: eth statistics modification
In native mode display all available staticstics.
In SRIOV mode on VF display only SW counters statistics,
in SRIOV mode on hypervisor display SW counters and errors (got from FW)
statistics.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:43 -05:00
Eugenia Emantayev
35fb9afbde mlx4: VF is not allowed to perform dump stats
In multifunction mode - DUMP_STATS command is not executed
for VFs.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:43 -05:00
Eugenia Emantayev
b477ba628a mlx4_en: clear all eth statistics when port goes up
Bug fix: Not all stats fields were cleared.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Reviewed-by: Yevgeny Petriln <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:43 -05:00
Roland Stigge
95120d5d1b Correct bad gpio naming
One of the GPIO names in drivers/gpio/gpio-lpc32xx.c
was bad. Renaming gpi000 -> gpio00

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-22 12:31:04 -07:00
Mark Brown
e6e740304a regulator: Provide devm_regulator_bulk_get()
Allow drivers to benefit from both the bulk APIs and managed resources
simultaneously.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-22 16:15:39 +00:00
Mark Brown
d5ad34f7cb regulator: Implement devm_regulator_free()
Allow consumers to free regulators allocated using devm_regulator_get()
if they need to. This will not normally be required.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-22 16:15:38 +00:00
Finn Thain
c808d3d839 mac_esp: rename irq
Rename the "Mac ESP" irq as "ESP" to be consistent with all the other Mac
drivers and ESP drivers.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-01-22 14:50:03 +01:00
Finn Thain
37be2c86f0 mac_scsi: dont enable mac_scsi irq before requesting it
Don't enable the SCSI irq when initialising the chip -- the irq has no
handler yet.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-01-22 14:50:03 +01:00
Finn Thain
d9070fc499 macfb: fix black and white modes
macfb won't init in black & white modes since fb_alloc_cmap() no longer
works for zero cmap length. Fix this and also clean up a few printk's and
some stylistic inconsistencies.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-01-22 14:50:02 +01:00
Mauro Carvalho Chehab
19c22c34dc Merge tag 'v3.3-rc1' into staging/for_v3.3
* tag 'v3.3-rc1': (8187 commits)
  Linux 3.3-rc1
  x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
  qnx4: don't leak ->BitMap on late failure exits
  qnx4: reduce the insane nesting in qnx4_checkroot()
  qnx4: di_fname is an array, for crying out loud...
  KEYS: Permit key_serial() to be called with a const key pointer
  keys: fix user_defined key sparse messages
  ima: fix cred sparse warning
  uml: fix compile for x86-64
  MPILIB: Add a missing ENOMEM check
  tpm: fix (ACPI S3) suspend regression
  nvme: fix merge error due to change of 'make_request_fn' fn type
  xen: using EXPORT_SYMBOL requires including export.h
  gpio: tps65910: Use correct offset for gpio initialization
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  tg3: Fix single-vector MSI-X code
  openvswitch: Fix multipart datapath dumps.
  ipv6: fix per device IP snmp counters
  ...
2012-01-21 23:23:15 -02:00
Russell King
c23bb602af MFD: ucb1x00-core: fix gpiolib direction_output handling
gpiolib drivers should first set the output data before setting the
direction to avoid putting glitches on an output signal.  As an
additional bonus, we tweak the code to avoid unnecessary register
writes to the output and direction registers if they have no need
to be updated.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-21 18:34:46 +00:00
Russell King
2e95e51e18 MFD: ucb1x00-core: fix missing restore of io output data on resume
We were not restoring the UCB1x00 gpio output data on resume, resulting
in incorrect GPIO output data after a resume.  Add the missing register
write.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-21 18:32:24 +00:00
Eugeni Dodonov
aca258482e drm/i915: print out which pixel format we do not support
Otherwise, we are left with pretty bogus message saying that the pixel
format is not supported while leaving the details to the telepatic powers.

v2: use DRM_DEBUG_KMS instead of DRM_ERROR

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-21 17:14:30 +01:00
Jesse Barnes
47842649ef drm/i915: properly mask and or watermark values for sprites
Now that we're using the sprite WM fields, we need to take care not to
clobber them in the main update_wm functions.  While we're at it, make
sure we mask out the old sprite wm value before or'ing in the new one
when the sprite wm is updated.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-21 17:13:05 +01:00
Daniel Vetter
c6a32fcbbb drm/i915: clarify gen2 pageflip cmd
I've reviewed gen2 pageflip code to hunt down multiple prepare pageflip
issues. The only thing I've found is a slight but functionally
meaningless confusion about the length of the mi cmd.

Fix it up and add a comment about what this dword should be (according
to docs at least).

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-21 17:09:05 +01:00
Mauro Carvalho Chehab
9e5e3097a3 [media] az6007: CodingStyle fixes
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:52:39 -02:00
Mauro Carvalho Chehab
44744f9b98 [media] az6007: Enable the driver at the building system
Add the corresponding entries to allow building this driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:47:20 -02:00
Mauro Carvalho Chehab
083995477d [media] az6007: Use the right keycode for Terratec H7
Instead of using a fake keycode, just for testing, use the
right one, for Terratec H7.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:47:15 -02:00
Mauro Carvalho Chehab
d3d076aaa7 [media] az6007: Convert IR to use the rc_core logic
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:47:11 -02:00
Mauro Carvalho Chehab
9165144033 [media] az6007: Fix IR handling
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:47:07 -02:00
Mauro Carvalho Chehab
711e1398d3 [media] az6007: Be sure to use kmalloc'ed buffer for transfers
USB data transfers may not work if the buffer is allocated at
the stack. Be sure to use kmalloc on all places where a buffer
is needed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:47:02 -02:00
Mauro Carvalho Chehab
a2c35d346d [media] az6007: Protect read/write calls with a mutex
This will avoid interference with CI and IR I/O operations.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:46:56 -02:00
Mauro Carvalho Chehab
04e3ece715 [media] az6007: Driver cleanup
Remove commented test code, remove unused poweroff stuff, and
fix the copyright data.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:46:51 -02:00
Mauro Carvalho Chehab
b19280cf2b [media] az6007: code cleanups and fixes
Several changes were needed to make az6007 to work, producing
the same commands as the original driver. This patch does
that.

While here, be less verbose when debug is not enabled.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:46:44 -02:00
Mauro Carvalho Chehab
d585681374 [media] drxk: Allow enabling MERR/MVAL cfg
Those two settings are different when used with az6007. Add
a config option to enable it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:46:39 -02:00
Mauro Carvalho Chehab
6fb65a66a2 [media] drxk: add support for Mpeg output clock drive strength config
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:46:35 -02:00
Mauro Carvalho Chehab
6e5caf8493 [media] az6007: Use DRX-K dynamic clock mode
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:46:25 -02:00
Mauro Carvalho Chehab
67f0461737 [media] drxk: Allow setting it on dynamic_clock mode
This is used on az6007.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:46:19 -02:00
Mauro Carvalho Chehab
978c26c367 [media] az6007: Use a per device private struct
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:46:13 -02:00
Mauro Carvalho Chehab
781dacc82a [media] az6007: Change it to use the MFE solution adopted at dvb-usb
This driver were written to use a previous solution for MFE at dvb-usb.
Due to the internal API changes, change the binding to work with the
new way.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:46:08 -02:00
Mauro Carvalho Chehab
1c9a284fbd [media] az6007: Use the new MFE support at dvb-usb
Use the newly dvb-usb MFE support added by
changeset 9bd9e3bd2c.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:46:04 -02:00
Mauro Carvalho Chehab
9b01f3d498 [media] az6007: improve the error messages for az6007 read/write calls
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:45:58 -02:00
Mauro Carvalho Chehab
2d5161b771 [media] az6007: Fix IR receive code
The code still needs to be commented, as there's a mutex
missing at the az6007_read() call. A mutex there is needed,
in order to prevent RC (or CI) calls while other operations
are in progress.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:45:53 -02:00
Mauro Carvalho Chehab
ba02473eaa [media] az6007: Simplify the code by removing an uneeded function
Everything to reset the demod is already at
az6007_frontend_poweron().

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:45:49 -02:00
Mauro Carvalho Chehab
3aecf2c5a9 [media] az6007: Simplify the read/write logic
This patch introduces no functional changes. It basically defines
a macro for each different req found at the driver, and cleans the
code to use them, making easier to understand the code.

With regards to the IR handling code, although the original code
doesn't define what's the request, it is clear, from the USB logs,
that 0xc5 is for IR polling.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:45:44 -02:00
Mauro Carvalho Chehab
3af2f4f15a [media] az6007: Change the az6007 read/write routine parameter
Use usb_device for those routines, as it allows using them on
all places. While there, rename to better express the meaning.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:45:40 -02:00
Mauro Carvalho Chehab
81091144eb [media] az6007: Fix some init sequences and use the right firmwares
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:45:36 -02:00
Mauro Carvalho Chehab
c108a5a0ef [media] az6007: need to define drivers name before including dvb-usb.h
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:45:30 -02:00
Mauro Carvalho Chehab
da989e0bc7 [media] drxk: Don't assume a default firmware name
Move the ngene/ddbridge firmware into their drivers.

There are two reasons for that:
	1) The firmware used there didn't work for a few devices
I tested here (Terratec H5, H6 and H7);
	2) At least Terratec H7 doesn't seem to require a firmware
for it to work.

After this change, if firmware is not specified, the driver will
use a rom-based firmware (this seems to be the case for Terratec
H7, although I need to better check the USB dumps to be sure about
that).

In any case, the firmware seems to be optional, as the DRX-K driver
don't return the firmware load error.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:45:25 -02:00
Mauro Carvalho Chehab
f2ba9e5dda [media] az6007: make driver less verbose
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:45:20 -02:00
Mauro Carvalho Chehab
067fb88c9d [media] az6007: move device PID's to the proper place
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-21 13:45:17 -02:00