Commit graph

153,333 commits

Author SHA1 Message Date
Yuval Mintz
9cbb576023 vxge: set maximal number of default RSS queues
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>

Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05 03:06:44 -07:00
Yuval Mintz
90b1ebe7af mlx4: set maximal number of default RSS queues
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>

Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05 03:06:44 -07:00
David S. Miller
534cb283ef cxgb3: Convert t3_l2t_get() over to dst_neigh_lookup().
This means passing in a suitable destination address.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05 02:29:40 -07:00
David S. Miller
1d248b1cf4 net: Pass neighbours and dest address into NETEVENT_REDIRECT events.
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05 02:21:55 -07:00
Patrice Chotard
3923040bd1 pinctrl/nomadik: add spi2_oc1_2 pin group
On 8500 and 9540, all SPI2 pins are driven by SPI block except SPI2_FRM
which is driven as GPIO due to specific constraints.
A new group spi2_oc1_2 is created which exclude SPI2_FRM pin.

Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-05 10:37:37 +02:00
David S. Miller
c473737765 cxgb4i: Convert over to dst_neigh_lookup().
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05 01:10:04 -07:00
David S. Miller
0b399d46b3 cxgbi: Convert over to dst_neigh_lookup().
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05 01:09:53 -07:00
David S. Miller
24db1ba866 qeth: Convert over to dst_neigh_lookup_skb().
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05 01:09:43 -07:00
David S. Miller
178709bbfe ipoib: Convert over to dev_lookup_neigh_skb().
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05 01:09:36 -07:00
Daniel Vetter
de2b998552 drm/i915: don't return a spurious -EIO from intel_ring_begin
The issue with this check is that it results in userspace receiving an
-EIO while the gpu reset hasn't completed, resulting in fallback to sw
rendering or worse.

Now there's also a stern comment in intel_ring_wait_seqno saying that
intel_ring_begin should not return -EAGAIN, ever, because some callers
can't handle that. But after an audit of the callsites I don't see any
issues. I guess the last problematic spot disappeared with the removal
of the pipelined fencing code.

So do the right thing and call check_wedge, which should properly
decide whether an -EAGAIN or -EIO is appropriate if wedged is set.

Note that the early check for a wedged gpu before touching the ring is
rather important (and it took me quite some time of acting like the
densest doofus to figure that out): If we don't do that and the gpu
died for good, not having been resurrect by the reset code, userspace
can merrily fill up the entire ring until it notices that something is
amiss.

Allowing userspace to emit more render, despite that we know that it
will fail can't lead to anything good (and by experience can lead to
all sorts of havoc, including angering the OOM gods and hard-hanging
the hw for good).

v2: Fix EAGAIN mispell, noticed by Chris Wilson.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 10:03:45 +02:00
Daniel Vetter
a9340ccab5 drm/i915: properly SIGBUS on I/O errors
... instead of looping endless with no hope of ever serving that
page-fault. We only need to break out of this loop when the gpu died,
to run the reset work (and hopefully resurrect it).

To clarify questions Chris raised on irc: This is about handling I/O
errors not from our own code, but e.g. when the disk died when trying
to swap in a gem bo. So this patch remidies the issue that the current
handling only handles gpu-death-induced cases of -EIO. Admittedly,
dying disks are much rarer than hanging gpus ...To clarify questions
Chris raised on irc: This is about handling I/O errors not from our
own code, but e.g. when the disk died when trying to swap in a gem bo.
So this patch remidies the issue that the current handling only
handles gpu-death-induced cases of -EIO. Admittedly, dying disks are
much rarer than hanging gpus ...

This seems to have been lost in:

commit d9bc7e9f32
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Feb 7 13:09:31 2011 +0000

    drm/i915: Fix infinite loop regression from 21dd3734

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 10:03:01 +02:00
Daniel Vetter
0a6759c6ba drm/i915: don't hang userspace when the gpu reset is stuck
With the gpu reset no longer using a trylock we've increased the
chances of userspace getting stuck quite a bit. To make that
(hopefully) rare case more paletable time out when waiting for the gpu
reset code to complete and signal this little issue to the caller by
returning -EIO.

This should help userspace to somewhat gracefully fall back and
hopefully allow the user to grab some logs and reboot the machine
(instead of staring at a frozen X screen in agony).

Suggested by Chris Wilson because I've been stubborn about allowing
the gpu reset code no to fail, ever (by removing the trylock).

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 10:02:24 +02:00
Daniel Vetter
d6b2c790a4 drm/i915: non-interruptible sleeps can't handle -EAGAIN
So don't return -EAGAIN, even in the case of a gpu hang. Remap it to
-EIO instead. Note that this isn't really an issue with
interruptability, but more that we have quite a few codepaths (mostly
around kms stuff) that simply can't handle any errors and hence not
even -EAGAIN. Instead of adding proper failure paths so that we could
restart these ioctls we've opted for the cheap way out of sleeping
non-interruptibly.  Which works everywhere but when the gpu dies,
which this patch fixes.

So essentially interruptible == false means 'wait for the gpu or die
trying'.'

This patch is a bit ugly because intel_ring_begin is all non-interruptible
and hence only returns -EIO. But as the comment in there says,
auditing all the callsites would be a pain.

To avoid duplicating code, reuse i915_gem_check_wedge in __wait_seqno
and intel_wait_ring_buffer. Also use the opportunity to clarify the
different cases in i915_gem_check_wedge a bit with comments.

v2: Don't access dev_priv->mm.interruptible from check_wedge - we
might not hold dev->struct_mutex, making this racy. Instead pass
interruptible in as a parameter. I've noticed this because I've hit a
BUG_ON(!mutex_is_locked) at the top of check_wedge. This has been
added in

commit b4aca0106c
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Wed Apr 25 20:50:12 2012 -0700

    drm/i915: extract some common olr+wedge code

although that commit is missing any justification for this. I guess
it's just copy&paste, because the same commit add the same BUG_ON
check to check_olr, where it indeed makes sense.

But in check_wedge everything we access is protected by other means,
so this is superflous. And because it now gets in the way (we add a
new caller in __wait_seqno, which can be called without
dev->struct_mutext) let's just remove it.

v3: Group all the i915_gem_check_wedge refactoring into this patch, so
that this patch here is all about not returning -EAGAIN to callsites
that can't handle syscall restarting.

v4: Add clarification what interuptible == fales means in our code,
requested by Ben Widawsky.

v5: Fix EAGAIN mispell noticed by Chris Wilson.

Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 10:01:14 +02:00
Daniel Vetter
d54a02c041 drm/i915: don't trylock in the gpu reset code
Simply failing to reset the gpu because someone else might still hold
the mutex isn't a great idea - I see reliable silent reset failures.
And gpu reset simply needs to be reliable and Just Work.

"But ... the deadlocks!"

We already kick all processes waiting for the gpu before launching the
reset work item. New waiters need to check the wedging state anyway
and then bail out. If we have places that can deadlock, we simply need
to fix them.

"But ... testing!"

We have the gpu hangman, and if the current gpu load gem_exec_nop
isn't good enough to hit a specific case, we can add a new one.

"But ...  don't we return -EAGAIN for non-interruptible calls to
wait_seqno now?"

Yep, but this problem already exists in the current code. A follow up
patch will remedy this by returning -EIO for non-interruptible sleeps
if the gpu died and the low-level wait bails out with -EAGAIN.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 10:00:46 +02:00
Paulo Zanoni
4c3c115a1e drm/i915: fix PIPE_DDI_PORT_MASK
Only bits 30:28, bit 31 is PIPE_DDI_FUNC_ENABLE.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:58:10 +02:00
Eugeni Dodonov
4c243e2573 drm/i915: prevent bogus intel_update_fbc notifications
This pollutes dmesg output even if we do not have FBC for the device, so
move the DRM_DEBUG_KMS statement lower.

v2: just kill the message as suggested by Daniel.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:07 +02:00
Eugeni Dodonov
a8f78b5822 drm/i915: re-initialize DDI buffer translations after resume
This is necessary for the modesetting to work correctly after a
suspend-resume cycle. Without this, the pipes and clocks got the correct
configuration, but the underlying DDI buffers configuration was lost.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:06 +02:00
Paulo Zanoni
40579abed0 drm/i915: don't ironlake_init_pch_refclk() on LPT
This function is used to set the PCH_DREF_CONTROL register, which does
not exist on LPT anymore.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:06 +02:00
Paulo Zanoni
45e6e3a1cd drm/i915: get rid of dev_priv->info->has_pch_split
Previously we had has_pch_split to tell us whether we had a PCH or not
and we also had dev_priv->pch_type to tell us which kind of PCH it
was, but it could only be used if we were 100% sure we did have a PCH.
Now that PCH_NONE was added to dev_priv->pch_type we don't need
has_pch_split anymore: we can just check for pch_type != PCH_NONE.

The HAS_PCH_{IBX,CPT,LPT} macros use dev_priv->pch_type, so they can
only be called after intel_detect_pch. The HAS_PCH_SPLIT macro looks
at dev_priv->info->has_pch_split, which is available earlier.

Since the goal is to implement HAS_PCH_SPLIT using dev_priv->pch_type
instead of dev_priv->info->has_pch_split, we need to make sure that
intel_detect_pch is called before any calls to HAS_PCH_SPLIT are made.
So we moved the intel_detect_pch call to an earlier stage.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:05 +02:00
Paulo Zanoni
f035083055 drm/i915: add PCH_NONE to enum intel_pch
And rely on the fact that it's 0 to assume that machines without a PCH
will have PCH_NONE as dev_priv->pch_type.

Just today I finally realized that HAS_PCH_IBX is true for machines
without a PCH. IMHO this is totally counter-intuitive and I don't
think it's a good idea to assume that we're going to check for
HAS_PCH_IBX only after we check for HAS_PCH_SPLIT.

I believe that in the future we'll have more PCH types and checks
like:

    if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))

will become more and more common. There's a good chance that we may
break non-PCH machines by adding these checks in code that runs on all
machines. I also believe that the HAS_PCH_SPLIT check will become less
common as we add more and more different PCH types. We'll probably
start replacing checks like:

    if (HAS_PCH_SPLIT(dev))
        foo();
    else
        bar();

with:

    if (HAS_PCH_NEW(dev))
        baz();
    else if (HAS_PCH_OLD(dev) || HAS_PCH_IBX(dev))
        foo();
    else
        bar();

and this may break gen 2/3/4.

As far as we have investigated, this patch will affect the behavior of
intel_hdmi_dpms and intel_dp_link_down on gen 4. In both functions the
code inside the HAS_PCH_IBX check is for IBX-specific workarounds, so
we should be safe. If we start bisecting gen 2/3/4 bugs to this commit
we should consider replacing the HAS_PCH_IBX checks with something
else.

V2: Improve commit message, list possible side effects and solution.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:05 +02:00
Jesse Barnes
2514bc510d drm/i915: prefer wide & slow to fast & narrow in DP configs
High frequency link configurations have the potential to cause trouble
with long and/or cheap cables, so prefer slow and wide configurations
instead.  This patch has the potential to cause trouble for eDP
configurations that lie about available lanes, so if we run into that we
can make it conditional on eDP.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45801
Tested-by: peter@colberg.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:05 +02:00
Daniel Vetter
930ebb4624 drm/i915: fix up ilk rc6 disabling confusion
While creating the new enable/disable_gt_powersave functions in

commit 8090c6b9da
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Jun 24 16:42:32 2012 +0200

    drm/i915: wrap up gt powersave enabling functions

I've botched up the handling of ironlake_disable_rc6. Fix this up by
calling it at the right place. Note though that ironlake_disable_rc6
does a bit more than just disabling rc6 - it also tears down all the
allocated context objects.

Hence we need to move intel_teardown_rc6 out and directly call it from
intel_modeset_cleanup.

Also properly mark ironlake_enable_rc6 as static and kill the un-used
declaration in i915_drv.h.

Note: In review a question popped out why disable_rc6 also tears down
the backing object and why we should move that out - it's simply for
consistency with gen6+ rps code, which does it that way.

Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:04 +02:00
Eugeni Dodonov
6590190d12 drm/i915: move force wake support into intel_pm
This commit moves force wake support routines into intel_pm modules, and
exports the gen6_gt_check_fifodbg routine (used in I915_READ).

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:04 +02:00
Eugeni Dodonov
1544d9d573 drm/i915: enable RC6 workaround on Haswell
For Haswell, on some of the early hardware revisions, it is possible to
run into issues when RC6 state is enabled and when pipes change state.

v2: add comment saying that this is for early revisions only.

v3: beautify as suggested by Daniel Vetter.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:03 +02:00
Eugeni Dodonov
cad2a2d776 drm/i915: introduce haswell_init_clock_gating
This is based on Ivy Bridge clock gating for now, but is subject to
changes in the future.

Note: Compared to the ivb clock gating this drops the the IDICOS
medium uncore sharing tuned in

commit 208482232d
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Fri May 4 18:58:59 2012 -0700

    drm/i915: set IDICOS to medium uncore resources

Eugeni wants to benchmark the effect of this first.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
[danvet: added note]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:03 +02:00
Eugeni Dodonov
8850948450 drm/i915: disable RC6 when disabling rps
We weren't disabling RC6 bits when bringing down RPS.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:02 +02:00
Eugeni Dodonov
4a637c2c83 drm/i915: enable RC6 by default on Haswell
It should be working so let's turn it on by default and catch any possible
issues faster.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:02 +02:00
Eugeni Dodonov
7cf50fc8d7 drm/i915: slightly improve gt enable/disable routines
Just a cosmetic change to simplify the if statement.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:56:02 +02:00
Eugeni Dodonov
5a7dc92a0b drm/i915: add RPS configuration for Haswell
Most of the RPS and RC6 enabling functionality is similar to what we had
on Gen6/Gen7, so we preserve most of the registers.

Note that Haswell only has RC6, so account for that as well. As suggested
by Daniel Vetter, to reduce the amount of changes in the patch, we still
write the RC6p/RC6pp thresholds, but those are ignored on Haswell.

Note: Some discussion about the nature of the new tuning constants
popped up in review - the answer is that we don't know why they've
changed, but the guide from VPG with the magic numbers simply has
different values now.

v2: Squash fix for ?: vs | operation precende bug into this patch.

Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Added note to commit message. Squashed fix.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 09:55:16 +02:00
Lauri Hintsala
64e2bc4130 clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3
SSP0 and SSP1 use ref_io0 which has decreased frequency. Expand
the frequency fix for ref_io1 to get SSP2 and SSP3 to work.

Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-05 09:36:44 +08:00
Dmitry Torokhov
404c3bc30c Merge commit 'v3.5-rc5' into next 2012-07-04 13:13:55 -07:00
Lars-Peter Clausen
9b7e31bbf4 Input: request threaded-only IRQs with IRQF_ONESHOT
Since commit 1c6c69525b ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail. This patch adds the
IRQF_ONESHOT to input drivers where it is missing. Not modified by
this patch are those drivers where the requested IRQ will always be a
nested IRQ (e.g. because it's part of an MFD), since for this special
case IRQF_ONESHOT is not required to be specified when requesting the
IRQ.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-04 13:12:19 -07:00
Yufeng Shen
a6d1bc1d5f HID: magicmouse: Implement Multi-touch Protocol B (MT-B)
The driver for Apple Magic Trackpad/Mouse currently uses
Multi-touch Protocol A (MT-A) to report touch events and uses
ABS_MT_TRACKING_ID to do finger tracking. The fact of the device
being able to track individual finger makes it possible to
report touch events using MT-B. This patch converts the driver
to use MT-B as it is preferred to MT-A.

V4: Removed BTN_TOUCH evnet.
V3: Removed the single touch related logic.
V2: Converting entirely to MT-B as Henrik Rydberg suggested.

Signed-off-by: Yufeng Shen <miletus@chromium.org>
Reviewed-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-04 20:58:48 +02:00
Yufeng Shen
6264307ed0 HID: magicmouse: Removing report_touches switch
Remove the report_touches switch as it is not so useful to turn
off reporting touch events for a touch device. Let the userspace
to do the filtering if the turning off is needed.

V2: Remove report_touches as suggeted by Chase Douglas

Signed-off-by: Yufeng Shen <miletus@chromium.org>
Reviewed-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-04 20:58:48 +02:00
Mark Brown
6dc027c977 regulator: arizona-micsupp: Force regulated mode until we have API support
It's almost certainly what the user would expect.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 16:22:39 +01:00
Daniel Nicoletti
0c47935c5b HID: add battery quirk for Apple Wireless ANSI
Add USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, to the quirk list since it report
wrong feature type and wrong percentage range.

Signed-off-by: Daniel Nicoletti <dantti12@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-04 15:46:25 +02:00
Andi Kleen
0cc15d03bc floppy: Run floppy initialization asynchronous
floppy_init is quite slow, 3s on my test system to determine
that there is no floppy. Run it asynchronous to the other
init calls to improve boot time.

[jkosina@suse.cz: fix modular build]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-04 14:01:40 +02:00
Arnd Bergmann
14070ade02 ARM: at91: fix new build errors
MULTI_IRQ_HANDLER and SPARSE_IRQ are now required everywhere because
mach/irqs.h and mach/entry-macros.S are gone but the symbols are
only selected for AT91SAM9, not for the NOMMU parts.

A few files now need to include linux/io.h directly, which used to
be included through other headers that have changed.

The new at91_aic_irq_priorities variable is only used with CONFIG_OF
enabled and should not be visible otherwise.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-04 13:56:48 +02:00
Axel Lin
9c6a74c5e0 regulator: ad5398: Fix min/max current limit boundary checking
It is ok to request current limit with min_uA < chip->min_uA and
max_uA > chip->max_uA.

We need to set min_uA = chip->min_uA if (min_uA < chip->min_uA),
this ensures the equation to calcuate selator does not return negative number.

Also set max_uA = chip->max_uA if (max_uA > chip->max_uA), as suggested by
Sonic.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 12:39:38 +01:00
Axel Lin
fca53d862d regulator: twl: Set enable enable_time in regulator_desc
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 12:38:37 +01:00
Axel Lin
4b7c948f55 regulator: gpio-regulator: Use core GPIO enable support
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 12:38:36 +01:00
Axel Lin
a2a8222be8 regulator: gpio-regulator: Set enable enable_time in regulator_desc
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 12:38:35 +01:00
Axel Lin
94f48ab32b regulator: tps65910: Set enable enable_time in regulator_desc
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 12:37:54 +01:00
Ohad Ben-Cohen
6db20ea8d8 remoteproc: allocate vrings on demand, free when not needed
Dynamically allocate the vrings' DMA when the remote processor
is about to be powered on (i.e. when ->find_vqs() is invoked),
and release them as soon as it is powered off (i.e. when ->del_vqs()
is invoked).

The obvious and immediate benefit is better memory utilization, since
memory for the vrings is now only allocated when the relevant remote
processor is used.

Additionally, this approach also makes recovery of a (crashing)
remote processor easier: one just needs to remove the relevant
vdevs, and the entire vrings cleanup takes place automagically.

Tested-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-04 13:27:04 +03:00
Linus Walleij
50bcd47c31 pinctrl/nomadik: kerneldoc fix
Document a missing function parameter to nmk_config_pin().

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-04 11:25:36 +02:00
Linus Walleij
5e754f330d pinctrl/nomadik: use devm_* allocators for gpio probe
The GPIO portions of the Nomadik pinctrl driver was not using
the managed devm_* interfaces, lets' use them consequently and
cut down the error path and special case handling.

Acked-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-04 11:05:05 +02:00
Ohad Ben-Cohen
15fd943af5 rpmsg: make sure inflight messages don't invoke just-removed callbacks
When inbound messages arrive, rpmsg core looks up their associated
endpoint (by destination address) and then invokes their callback.

We've made sure that endpoints will never be de-allocated after they
were found by rpmsg core, but we also need to protect against the
(rare) scenario where the rpmsg driver was just removed, and its
callback function isn't available anymore.

This is achieved by introducing a callback mutex, which must be taken
before the callback is invoked, and, obviously, before it is removed.

Cc: stable <stable@vger.kernel.org>
Reported-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-04 11:51:59 +03:00
Ohad Ben-Cohen
5a081caa04 rpmsg: avoid premature deallocation of endpoints
When an inbound message arrives, the rpmsg core looks up its
associated endpoint and invokes the registered callback.

If a message arrives while its endpoint is being removed (because
the rpmsg driver was removed, or a recovery of a remote processor
has kicked in) we must ensure atomicity, i.e.:

- Either the ept is removed before it is found

or

- The ept is found but will not be freed until the callback returns

This is achieved by maintaining a per-ept reference count, which,
when drops to zero, will trigger deallocation of the ept.

With this in hand, it is now forbidden to directly deallocate
epts once they have been added to the endpoints idr.

Cc: stable <stable@vger.kernel.org>
Reported-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-04 11:51:42 +03:00
Ohad Ben-Cohen
e121aefa7d remoteproc: fix missing CONFIG_FW_LOADER configurations
Remoteproc requires user space firmware loading support, so
let's select FW_LOADER explicitly to avoid painful misconfigurations
(which only show up in runtime).

Cc: stable <stable@vger.kernel.org>
Reported-by: Mark Grosen <mgrosen@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-04 11:01:12 +03:00
Alexander Holler
fb31fbeb64 leds: heartbeat: fix bug on panic
With commit 49dca5aebf I introduced
a bug (visible if CONFIG_PROVE_RCU is enabled) which occures when a panic
has happened:

[ 1526.520230] ===============================
[ 1526.520230] [ INFO: suspicious RCU usage. ]
[ 1526.520230] 3.5.0-rc1+ #12 Not tainted
[ 1526.520230] -------------------------------
[ 1526.520230] /c/kernel-tests/mm/include/linux/rcupdate.h:436 Illegal context switch in RCU read-side critical section!
[ 1526.520230]
[ 1526.520230] other info that might help us debug this:
[ 1526.520230]
[ 1526.520230]
[ 1526.520230] rcu_scheduler_active = 1, debug_locks = 0
[ 1526.520230] 3 locks held by net.agent/3279:
[ 1526.520230]  #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff82f85962>] do_page_fault+0x193/0x390
[ 1526.520230]  #1:  (panic_lock){+.+...}, at: [<ffffffff82ed2830>] panic+0x37/0x1d3
[ 1526.520230]  #2:  (rcu_read_lock){.+.+..}, at: [<ffffffff810b9b28>] rcu_lock_acquire+0x0/0x29
[ 1526.520230]
[ 1526.520230] stack backtrace:
[ 1526.520230] Pid: 3279, comm: net.agent Not tainted 3.5.0-rc1+ #12
[ 1526.520230] Call Trace:
[ 1526.520230]  [<ffffffff810e1570>] lockdep_rcu_suspicious+0x109/0x112
[ 1526.520230]  [<ffffffff810bfe3a>] rcu_preempt_sleep_check+0x45/0x47
[ 1526.520230]  [<ffffffff810bfe5a>] __might_sleep+0x1e/0x19a
[ 1526.520230]  [<ffffffff82f8010e>] down_write+0x26/0x81
[ 1526.520230]  [<ffffffff8276a966>] led_trigger_unregister+0x1f/0x9c
[ 1526.520230]  [<ffffffff8276def5>] heartbeat_reboot_notifier+0x15/0x19
[ 1526.520230]  [<ffffffff82f85bf5>] notifier_call_chain+0x96/0xcd
[ 1526.520230]  [<ffffffff82f85cba>] __atomic_notifier_call_chain+0x8e/0xff
[ 1526.520230]  [<ffffffff81094b7c>] ? kmsg_dump+0x37/0x1eb
[ 1526.520230]  [<ffffffff82f85d3f>] atomic_notifier_call_chain+0x14/0x16
[ 1526.520230]  [<ffffffff82ed28e1>] panic+0xe8/0x1d3
[ 1526.520230]  [<ffffffff811473e2>] out_of_memory+0x15d/0x1d3

So in case of a panic, now just turn of the LED. Other approaches like
scheduling a work to unregister the trigger aren't working because there
isn't much which still runs after a panic occured (except timers).

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-04 15:55:19 +08:00