Commit graph

153,333 commits

Author SHA1 Message Date
Ben Skeggs
a219997a3b drm/nvc0/gr: add some missing magics for 0xc1/0xc8/0xce
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23 15:57:43 +10:00
Ben Skeggs
0411de8548 drm/nvc0/gr: import and use our own fuc by default
The ability to use NVIDIA's fuc has been retained *temporarily* in order
to better debug any issues that may be lingering in our initial attempt
at writing this ucode.  Once I'm fairly confident we're okay, it'll be
removed.

There's a number of things not implemented by this fuc currently, but
most of it is sets of state that our context setup would not have used
anyway.  No doubt we'll find out what they're for at some point, and
implement it if required.

This has been tested on 0xc0/0xc4 thus far, and from what I could tell
it worked as well as NVIDIA's.  It's also been tested on 0xc1, but even
with NVIDIA's fuc that chipset doesn't work correctly with nouveau yet.

0xc3/0xc8/0xce should in theory be supported too, but I don't have the
hardware to check that.

There's no doubt numerous bugs to squash yet, please report any!

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23 15:57:38 +10:00
Ben Skeggs
f8522fc80f drm/nvc0: fix suspend/resume of PGRAPH/PCOPYn
We need the physical VRAM address in vinst, even for objects mapped into
a vm, as the gpuobj suspend/resume code uses PMEM to access the object.

Previously, vinst was overloaded to mean "VRAM address" for !VM objects,
and "VM address" for VM objects, causing the wrong data to be accessed
during suspend/resume.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23 15:57:33 +10:00
Ben Skeggs
aba99a8400 drm/nouveau: default to noaccel on 0xc1/0xc8/0xce for now
Until we know these should work properly, would much rather default to
noaccel than risk giving people corruption/hangs out of the box..

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23 15:57:28 +10:00
Ben Skeggs
d4409cc7e2 drm/nvc1/gr: switch on acceleration support
There's issues with certain 3D apps still, unknown whether this is a kernel
issue or not.. It does appear that it may be in the 3D driver however.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23 15:57:25 +10:00
Ben Skeggs
b53a2d0649 drm/nvc0/gr: enable 0xc8/0xce support, no idea if it works or not..
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23 15:57:20 +10:00
Ben Skeggs
e1b89b1ca5 drm/nvc0/gr: some initial state modifications
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23 15:57:16 +10:00
Ben Skeggs
6f376460e4 drm/nvc0/gr: 0x9197/0x9297 state init
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23 15:57:11 +10:00
Ben Skeggs
847adea2c7 drm/nvc0/gr: macro to determine fermi class, will use it in a few places
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23 15:57:07 +10:00
Ben Skeggs
068da16198 drm/nvc0/fifo: fix typos in unload_context
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23 15:57:03 +10:00
Ben Skeggs
310ff414b3 drm/nvc0/fb: allocate page for some unknown PFFB object
Fixes DMAR faults during accel, more than likely a similar problem to what
was solved on nv50 previously.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23 15:56:59 +10:00
Martin Peres
74cfad188b drm/nvc0: Read temperature on Fermi like we do on nv84+
Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-23 15:56:52 +10:00
Linus Torvalds
68d0080f1e Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PCI / PM: Block races between runtime PM and system sleep
  PM / Domains: Update documentation
  PM / Runtime: Handle clocks correctly if CONFIG_PM_RUNTIME is unset
  PM: Fix async resume following suspend failure
  PM: Free memory bitmaps if opening /dev/snapshot fails
  PM: Rename dev_pm_info.in_suspend to is_prepared
  PM: Update documentation regarding sysdevs
  PM / Runtime: Update doc: usage count no longer incremented across system PM
2011-06-22 21:08:52 -07:00
Marius B. Kotsbak
7cdfa4a348 net/usb: kalmia: Various fixes for better support of non-x86 architectures.
-Support for big endian.
-Do not use USB buffers at the stack.
-Safer/more efficient code for local constants.

Signed-off-by: Marius B. Kotsbak <marius@kotsbak.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-22 13:41:31 -07:00
Hauke Mehrtens
cd15598707 ssb: add __devinit to some functions
Two functions in ssb are using register_pci_controller() which is
__devinit. The functions ssb_pcicore_init_hostmode() and
ssb_gige_probe() should also be __devinit.

This fixes the following warning:
WARNING: vmlinux.o(.text+0x2727b8): Section mismatch in reference from the function ssb_pcicore_init_hostmode() to the function .devinit.text:register_pci_controller()
The function ssb_pcicore_init_hostmode() references
the function __devinit register_pci_controller().
This is often because ssb_pcicore_init_hostmode lacks a __devinit
annotation or the annotation of register_pci_controller is wrong.

WARNING: vmlinux.o(.text+0x273398): Section mismatch in reference from the function ssb_gige_probe() to the function .devinit.text:register_pci_controller()
The function ssb_gige_probe() references
the function __devinit register_pci_controller().
This is often because ssb_gige_probe lacks a __devinit
annotation or the annotation of register_pci_controller is wrong.

Reported-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:58 -04:00
Gabor Juhos
999a7a88f1 ath9k: enable support for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:57 -04:00
Gabor Juhos
7d95847c9b ath9k: add external_reset callback to ath9k_platfom_data for AR9330
The patch adds a callback to ath9k_platform_data. If the
callback is provided by the platform code, then it can be
used to hard reset the WMAC device.

The callback is required for doing a hard reset of the AR9330
chips to get them working again after a hang.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:57 -04:00
Gabor Juhos
4187afa29a ath9k: configure internal regulator for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:57 -04:00
Gabor Juhos
7b09e49ec8 ath9k: configure diversity based on eeprom contents for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:57 -04:00
Gabor Juhos
dfc3a7b66c ath9k: fix few register offsets for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:56 -04:00
Gabor Juhos
c4cf2c589d ath9k: set diversity group for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:56 -04:00
Gabor Juhos
e7ef5bc079 ath9k: add fast_div_bias configuration for diversity group 1
The patch adds the missing configuration code for diversity
group 1.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:56 -04:00
Gabor Juhos
223c5a8785 ath9k: remove superfluous parentheses
Also remove two empty lines.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:55 -04:00
Gabor Juhos
cd0ed1b5fc ath9k: fix antenna diversity configuration for non AR9485 chips
The current values must be used only on AR9485 chips. Other chips
requires different values.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:55 -04:00
Gabor Juhos
66ce235a9d ath9k: add a missing case statement to ath_ant_div_comb_alt_check
The 'ar9003_hw_antdiv_comb_conf_get' function sets div_group to 2
however that value is not used in 'ath_ant_div_comb_alt_check'.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:55 -04:00
Gabor Juhos
7216198d31 ath9k: use correct max_streams for AR9330
The AR9330 is a single stream chip.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:54 -04:00
Gabor Juhos
431da56a81 ath9k: enable antenna diversity for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:54 -04:00
Gabor Juhos
0c453732a7 ath9k: set NF limits for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:54 -04:00
Gabor Juhos
dc9aa5fc28 ath9k: configure xpa bias level for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:53 -04:00
Gabor Juhos
5b5c033b59 ath9k: use correct EEPROM base for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:53 -04:00
Gabor Juhos
7d790a21e5 ath9k: enable tuning capacitance configuration for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:53 -04:00
Gabor Juhos
7dc5966d5c ath9k: skip internal regulator configuration for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:53 -04:00
Gabor Juhos
4033bdad63 ath9k: enable TX/RX data byte swap for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:52 -04:00
Gabor Juhos
5acb4b9366 ath9k: configure RF channel frequency for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:52 -04:00
Gabor Juhos
dbb204e39f ath9k: fix channel frequency calculation for AR9340
A multiplication is missing from the current formula.

Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:52 -04:00
Gabor Juhos
c1acfbe863 ath9k: read spur frequency information from eeprom for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:52 -04:00
Gabor Juhos
0e707a9473 ath9k: don't enable LDPC for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:51 -04:00
Gabor Juhos
88e641df19 ath9k: use different BB watchdog timeout value for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:51 -04:00
Gabor Juhos
a5415d625d ath9k: add AR9330 specific PLL initialization
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:51 -04:00
Gabor Juhos
77a27da389 ath9k: initialize rx gain table for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:50 -04:00
Gabor Juhos
a208db9441 ath9k: initialize tx gain table for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:50 -04:00
Gabor Juhos
172805ad46 ath9k: initialize mode registers for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:50 -04:00
Gabor Juhos
70722ea434 ath9k: add AR9330 initvals
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:49 -04:00
Gabor Juhos
e9b7c5914d ath9k: add platform device id for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:49 -04:00
Gabor Juhos
3762561aa8 ath9k: add MAC revision detection for AR9330
The AR9330 1.0 and 1.1 are using the same revision,
thus it is not possible to distinguish the two chips.
The platform setup code can distinguish the chips based
on the SoC revision.

Add a callback function to ath9k_platform_data in order
to allow getting the revision number from the platform code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:49 -04:00
Gabor Juhos
03689301da ath9k: define device id for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:48 -04:00
Gabor Juhos
2c8e59379a ath9k: define mac version for AR9330
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:48 -04:00
Mohammed Shafi Shajakhan
7952ca5b20 ath9k_hw: Fix calculation of PAPRD training power at 5Ghz
higher the chainmask, lesser the power_delta to be added
to the paprd_training_power

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:48 -04:00
Amitkumar Karwar
a5ffddb70c mwifiex: remove casts of void pointers
In some cases local pointers are used to cast void pointers passed to
the function. Those unnecessary local pointers are also removed.

This patch was inspired by Joe Perches' patch
[PATCH net-next 1/2] wireless: Remove casts of void *;
and the comments from Julian Calaby.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Cc: Joe Perches <joe@perches.com>
Cc: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:47 -04:00
Jussi Kivilinna
55f7782e14 zd1211rw: detect stalled beacon interrupt faster
As USB_INT_ID_RETRY_FAILED can override USB_INT_ID_REGS, beacon interrupt
(CR_INTERRUPT) might be lost. Problem is that when device trigger CR_INTERRUPT
it disables HW interrupt. Now if USB_INT_ID_REGS with CR_INTERRUPT gets lost,
beacon interrupt stays disabled until beacon watchdog notices the stall. This
happen very often on heavy TX. Improve watchdog to trigger earlier, after three
missing beacon interrupts.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:47 -04:00