Commit graph

153,333 commits

Author SHA1 Message Date
Yuval Mintz
5481388bc7 bnx2x: fix link for BCM57711 with 84823 phy
Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-16 23:38:36 -07:00
Yuval Mintz
50a2984543 bnx2x: fix I2C non-respondent issue
When I2C is not responding it's usually due to a previous
unexpected reset during I2C operation. We release it by
powering down and up the SFP+ module.

Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-16 23:38:36 -07:00
Olof Johansson
51a1ec0164 Merge branch 'nomadik-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/soc
* 'nomadik-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: nomadik: bump all IRQ numbers by one
  ARM: nomadik: register the MMC/SD device
  ARM: nomadik: register the I2C devices
  ARM: nomadik: register all three I2C busses
  ARM: nomadik: convert to generic clock
  ARM: nomadik: register PL031 RTC
  ARM: nomadik: register AMBA devices dynamically
  ARM: nomadik: register GPIOs dynamically
2012-06-16 22:40:37 -07:00
Michael Chan
260762c7d8 bnx2: Update version 2.2.2
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-16 22:22:59 -07:00
Michael Chan
aefd90e414 bnx2: Read PCI function number from internal register
so that it will work on any hypervisor.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-16 22:22:59 -07:00
Michael Chan
13e63517f4 bnx2: Dump additional BC_STATE during firmware sync timeout.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-16 22:22:58 -07:00
Michael Chan
555069dad0 bnx2: Dump all FTQ_CTL registers during tx_timeout
to help debug tx timeouts reported in the field.

Reviewed-by Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-16 22:22:58 -07:00
Linus Torvalds
88c144b12a fbdev fixes for 3.5
- two fixes for s3c-fb by Jingoo Han
   (including a fix for a potential division by zero)
 - a couple of randconfig fixes by Arnd Bergmann
 - a cleanup for bfin_adv7393fb by Emil Goode
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJP3OVbAAoJECSVL5KnPj1P+BoP/jf20UvGevLHaKYLxjB6elWP
 cutoJFgfPWWdJcu6qwk4thR3fAZkB9R1vorFEp0EP7m8EkB8poP7pdPK7xGzbLKT
 iGhWUy4pENcleyPu0mXE2kqLfq5g3fnPc9M0aiIySwfGAgjop24duP9NYMBL5sfr
 GHs7JcrcyqWWVDHQLK3gx7JpVzoQOlN44yy64Su2GR8hfLUiSHC35AVnmK8svkra
 S5dTa9RJJwVFowF8/o5bUzFuuMctKc22CbXA2NkR+PUHHc0zAqaRo0XedTr02C8u
 bM9w7RWxQ71ZprJJeaBJgUbDev0JO9QxX7kA6eN3MRTHimi2wz9n2jy95R+H3ITm
 EXhCl6F2kf+xzOfl9Ta9lB4eUthj2O1yBHGArpc5iJOuWHip2ggW4SrEyjKLrOpn
 7AyB+D9gbZppnms4z5kCPM0Q/i/flyMoEccuaV4D3AaWw1miA4leQUtfjL/SGavl
 9t6N6Zo2OT/h+Z36GauFnH3ap4lXNGZo3I03sFGp7E4VC0MDA8UnqG70zzdzm7BM
 CO/c34HVpNBS0MH6blsUn+64aftJampqVzlQ0uj++5R1fpDGBCo+p+WEkIx9GGqN
 bhJbmXR0HPnHtNQtf/LCPv98V/OAnWpfC98EeewPAQ3MTAexpdS8JduuY3PjhdhD
 TkLBbb6A5UCU90SV32AD
 =0Zkc
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-fixes-for-3.5-1' of git://github.com/schandinat/linux-2.6

Pull fbdev fixes from Florian Tobias Schandinat:

 - two fixes for s3c-fb by Jingoo Han (including a fix for a potential
   division by zero)

 - a couple of randconfig fixes by Arnd Bergmann

 - a cleanup for bfin_adv7393fb by Emil Goode

* tag 'fbdev-fixes-for-3.5-1' of git://github.com/schandinat/linux-2.6:
  video: s3c-fb: fix possible division by zero in s3c_fb_calc_pixclk
  video: s3c-fb: clear SHADOWCON register when clearing hardware window registers
  drivers/tosa: driver needs I2C and SPI to compile
  drivers/savagefb: use mdelay instead of udelay
  video/console: automatically select a font
  video/ili9320: do not mark exported functions __devexit
  drivers/video: use correct __devexit_p annotation
  video: bfin_adv7393fb: Convert to kstrtouint_from_user
2012-06-16 16:59:05 -07:00
Bjorn Helgaas
fbebb9fd22 PCI: add infrastructure for devices with broken INTx masking
pci_intx_mask_supported() assumes INTx masking is supported if the
PCI_COMMAND_INTX_DISABLE bit is writable.  But when that bit is set,
some devices don't actually mask INTx or update PCI_STATUS_INTERRUPT
as we expect.

This patch adds a way for quirks to identify these broken devices.

[bhelgaas: split out from Chelsio quirk addition]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-16 14:40:22 -06:00
Dave Airlie
c4af5c4597 Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: cache the EDID for eDP panels
  Revert "drm/i915/dp: Use auxch precharge value of 5 everywhere"
  drm/i915: eDP aux needs vdd
  drm/i915: don't enumerate HDMID if an eDP panel is already active on the port
2012-06-16 14:45:17 +01:00
Jesse Barnes
d6f24d0fa6 drm/i915: cache the EDID for eDP panels
They aren't going anywhere, and probing on DDC can cause the panel to
blank briefly, so read them up front and cache them for later queries.

v2: fix potential NULL derefs in intel_dp_get_edid_modes and
    intel_dp_get_edid (Jani)
    copy full EDID length, including extension blocks (Takashi)
    free EDID on teardown (Takashi)
v3: malloc a new EDID buffer that's big enough for the memcpy (Chris)
v4: change handling of NULL EDIDs, just preserve the NULL behavior
    across detects and mode list fetches rather than trying to re-fetch
    the EDID (Chris)
v5: be glad that Chris is around to remind me to hit C-x C-s before
    committing.

References: https://bugs.freedesktop.org/show_bug.cgi?id=46856
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-16 15:39:02 +02:00
Daniel Vetter
6b4e0a93ff Revert "drm/i915/dp: Use auxch precharge value of 5 everywhere"
This reverts commit 092945e11c.

This commit prevents a DP screen from properly training the link.
Oddly enough it works, once the machine has been warm-booted with an
older kernel.

According to DP docs this _should_ have been the right precharge time.
Also, the commit that originally introduces this was just general snb
DP enabling and didn't mention any specific reason for this special
value. Whatever, trust the reporter that this makes things worse and
let's just revert it.

v2: Less spelling fail.

Cc: Adam Jackson <ajax@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reported-by: "Wouter M. Koolen" <W.M.Koolen-Wijkstra@cwi.nl>
Buglink: https://lkml.org/lkml/2012/6/14/301
Cc: stable@vger.kernel.org (only for 3.4)
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-16 15:39:02 +02:00
Daniel Vetter
351cfc34db drm/i915: eDP aux needs vdd
The new oui probe has been missing these.

This issue has been introduce in

commit 0d19832853
Author: Adam Jackson <ajax@redhat.com>
Date:   Mon May 14 16:05:47 2012 -0400

    drm/i915/dp: Probe branch/sink OUIs

v2: Do the eDP vdd dance of simply not probing the OUI on eDP panels
as suggested by Chris Wilson.

v3: Fix up the error path fail - I suck.

Cc: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50808
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Bugreport: http://permalink.gmane.org/gmane.comp.video.dri.devel/69695
Tested-by: Yang Guang <guang.a.yang@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-16 15:39:02 +02:00
Jesse Barnes
b708a1d5ea drm/i915: don't enumerate HDMID if an eDP panel is already active on the port
This prevents the HDMI detect functions from poking at an eDP
connected panel, which can lead to trouble.

[danvet: Note that we have some other reports of DP vs. HDMI fighting,
but the general case is a much bigger fish to fry.]

References: https://bugs.freedesktop.org/show_bug.cgi?id=42278
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-16 15:39:01 +02:00
Alex Deucher
7c77bf2a1a drm/radeon: add support for STRMOUT_BASE_UPDATE on 7xx
Required for streamout.  Bump drm minor.

Marek v2: fix pkt->count check

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16 14:30:56 +01:00
Alex Deucher
b866d1334b drm/radeon: add some additional 6xx/7xx/EG register init
- SMX_SAR_CTL0 needs to be programmed correctly to prevent
problems with memory exports in certain cases.
- VC_ENHANCE needs to be initialized on 6xx/7xx.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16 14:30:47 +01:00
Daniel Vetter
aaa377302b drm/i915/crt: Do not rely upon the HPD presence pin
VGA hotplug detection "works" by measuring the resistance across
certain pins. A lot of kvm switches fumble this and wire up cheap
resistors with the wrong resistance or don't bother at all.

To accomodate these, also try to detect a connected monitor by trying
to grab the edid. Contrary to !HAS_HOTPLUG platforms we don't bother
with an actual load-detection cycle when the output is life - that
would be actual work to implement because things moved around. This is
the big difference to Chris Wilson's original approach:

commit 9e612a008f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu May 31 13:08:53 2012 +0100

    drm/i915/crt: Do not rely upon the HPD presence pin

This blew up on Linus' machine because it errornously detected a vga
screen (without and edid and hence only the default modes), leading to
it's prompt removal:

commit 8f53369b75
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Fri Jun 8 14:53:06 2012 -0700

    Revert "drm/i915/crt: Do not rely upon the HPD presence pin"

Some digging around in Bspec shows the reason why load detect doesn't work on
newer chips - the legacy VGA load detect bit isn't wired up any longer:

Public Snb Bspec, Vol3 Part1, 1.1.1 ST00 Input Status 0, bit4:

"RGB Comparator / Sense. This bit is here for compatibility and will
always return one. Monitor detection must be done be done through the
programming of registers in the MMIO space.
0 = Below threshold
1 = Above threshold"

v2: Add a comment in the code that load detect on hotplug capable
machines is broken and pimp the commit message with a quote of Bspec
to show why.

Reported-and-tested-by: Matthieu LAVIE <boiteamadmax@hotmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50501
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-16 15:30:32 +02:00
Rafał Miłecki
6b53a0507b drm/radeon: enable HDMI on DCE5 (AKA NI excluding Aruba)
After recent changes HDMI code is ready to be enabled on DCE5. This
patch just changes conditions to execute already present code on DCE5.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Christian König <christian.koenig@amd.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Tested-by: Zoltán Böszörményi <zboszor@pr.hu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16 11:21:19 +01:00
Márton Németh
648ccc7d35 drm sis: initialize object_idr
The filed object_idr of struct drm_sis_private was introduced with
commit http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=6de8a748881f1cd9d795454da2b6db616d5ca3d7 .

The idr_init(&dev->object_name_idr) is called instead of
idr_init(&dev_priv->object_idr) by mistake, leaving object_idr
uninitialized. Correct this.

This patch was not tested because of lack of hardware.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16 11:18:53 +01:00
Márton Németh
ce020ea532 drm via: initialize object_idr
The field obejct_idr of struct drm_via_private was introduced with the
commit http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=77ee8f3825054f23b17e9c8f728f061defd86cdc .
In that patch idr_init(&dev->object_name_idr) was called instead of
idr_init(&dev_priv->object_idr) by mistake, leaving the dev_priv->object_idr
uninitialized. To be more exact, the object_idr buffer is filled with zeros
because of kzalloc(), but the dev_priv->object_idr.lock spinlock can cause
system freeze at lib/idr.c:move_to_free_list() when spin_lock_irqsave()
is called on this spinlock.

The patch was tested on Clevo D4J, model D410J laptop, on the following
hardware, without AGP kernel module loaded:

  # lspci -s 01:00.0 -n
  01:00.0 0300: 1106:3108 (rev 01)
  # lspci -s 01:00.0 -v
  01:00.0 VGA compatible controller: VIA Technologies, Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] (rev 01) (prog-if 00 [VGA controller])
          Subsystem: CLEVO/KAPOK Computer Device 4702
          Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
          Memory at f0000000 (32-bit, prefetchable) [size=64M]
          Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
          Expansion ROM at <unassigned> [disabled]
          Capabilities: [60] Power Management version 2
          Capabilities: [70] AGP version 3.0

Signed-off-by: Márton Németh <nm127@freemail.hu>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16 11:18:38 +01:00
Dave Airlie
489797d510 drm/radeon/prime: reserve/unreserve around pin
I finally got to test this code a bit more and hit the ttm
no reserved assert, so add the reservations around the pinning.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16 11:14:05 +01:00
Alex Deucher
0ec0612a80 drm/radeon: fix regression in dynpm due to multi-ring rework
Not all asics have all rings, so make sure the ring is ready
before attempting to check it in the dynpm work handler.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=43367

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16 11:12:13 +01:00
Dave Airlie
e5a867a51d drm/udl: only bind to the video devices on the hub.
This is ported from udlfb.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=832188
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16 11:09:58 +01:00
Linus Torvalds
a2c2df8672 SCSI fixes on 20120614
This is a couple of minor fixes, one for a preempt warning in the mpt2sas
 driver and one is a config failure with the new sd async domain.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJP2fuGAAoJEDeqqVYsXL0Md88IAMw1nLZkg39TzEM4tAkkCa4C
 o3e3xcmUdO1lqswmgUDaD95Z0H9MUBxwHWQGiAQ7fheuyXXyGOLINkBTx7wOGksk
 JpsjEHNhVwW2rxFwZDLYxvtBjRy9E6wJPeuBQxQdU2gGVzjmk2bAV6mJnf+/wDkH
 uqJKnrmVNU7x5drw1wP2z0i3zm8UZVlB+eW3J5ReZzfQlpBYWmFcwxrSTp8Q03ko
 rx+rMNYlQO+5Cp0/UZxdIlTw4TTaU+F6bXC8jPzZ2zj0mUWtBxiF6rYZQlebNM5n
 /byCuivfM9OMeWaiwk5ERIQ/1iOUF4L5apCNUIG2PFtS7RY4349luWpBoeYkaVY=
 =eNSh
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is a couple of minor fixes, one for a preempt warning in the
  mpt2sas driver and one is a config failure with the new sd async
  domain."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] Fix sd_probe_domain config problem
  [SCSI] mpt2sas: Fix unsafe using smp_processor_id() in preemptible
2012-06-15 17:39:32 -07:00
Linus Torvalds
069915b946 Five bug-fixes:
- When booting as PVHVM we would try to use PV console - but would not validate
    the parameters causing us to crash during restore b/c we re-use the wrong event
    channel.
  - When booting on machines with SR-IOV PCI bridge we didn't check for the bridge
    and tried to use it.
  - Under AMD machines would advertise the APERFMPERF resulting in needless amount
    of MSRs from the guest.
  - A global value (xen_released_pages) was not subtracted at bootup when pages
    were added back in. This resulted in the balloon worker having the wrong
    account of how many pages were truly released.
  - Fix dead-lock when xen-blkfront is run in the same domain as xen-blkback.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJP2kcmAAoJEFjIrFwIi8fJXLcH/0a2m6KMcyjc4WaCHspAEFDL
 9B055QUFDEOlH55wE2QeED/8D+0HUbTYnQBycH126XLKzLfRv1fsrKFKDSA/SWW2
 Mh8N316UrY5Wc3KMdxXdCXJCDqDs7VhARTv6JdlUqUlH9oLRYE6CMRO8MujT0iwd
 r+uEnNuW0udMFt8x9SnJW7pEaq7u2N5koEGdWEzZhfoumDaCRxm5OKAKXZ0DZlEZ
 /BPjTW/N+Pf4u+bJZY+wQq41y4zGMqu7TDo/hOpuGZxeqtVnCE9trBbuGLnp4K+W
 n4TfZZs9Y1kovSMj6qTeB0aP0F77tqHyXPb1oPKxm2kWfqT2dFtIRpuLtXYSC+o=
 =cQl2
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull five Xen bug-fixes from Konrad Rzeszutek Wilk:

 - When booting as PVHVM we would try to use PV console - but would not validate
   the parameters causing us to crash during restore b/c we re-use the wrong event
   channel.
 - When booting on machines with SR-IOV PCI bridge we didn't check for the bridge
   and tried to use it.
 - Under AMD machines would advertise the APERFMPERF resulting in needless amount
   of MSRs from the guest.
 - A global value (xen_released_pages) was not subtracted at bootup when pages
   were added back in. This resulted in the balloon worker having the wrong
   account of how many pages were truly released.
 - Fix dead-lock when xen-blkfront is run in the same domain as xen-blkback.

* tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: mark local pages as FOREIGN in the m2p_override
  xen/setup: filter APERFMPERF cpuid feature out
  xen/balloon: Subtract from xen_released_pages the count that is populated.
  xen/pci: Check for PCI bridge before using it.
  xen/events: Add WARN_ON when quick lookup found invalid type.
  xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness.
  xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN
  xen/hvc: Collapse error logic.
2012-06-15 17:17:15 -07:00
Linus Torvalds
41c8c53523 USB fixes for 3.5-rc3
Here are a bunch of tiny fixes for the USB core and drivers for 3.5-rc3
 
 A bunch of gadget fixes, and new device ids, as well as some fixes for a number
 of different regressions that have been reported recently.  We also fixed some
 PCI host controllers to resolve a long-standing bug with a whole class of host
 controllers that have been plaguing people for a number of kernel releases,
 preventing their systems from suspending properly.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk/byIEACgkQMUfUDdst+ykLBwCgiAi/cS4ObblcBEbnBvosPgsA
 PqEAoJLMAwhcozeEOWLhb++45Vs+UjKv
 =HAWc
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a bunch of tiny fixes for the USB core and drivers for
  3.5-rc3

  A bunch of gadget fixes, and new device ids, as well as some fixes for
  a number of different regressions that have been reported recently.
  We also fixed some PCI host controllers to resolve a long-standing bug
  with a whole class of host controllers that have been plaguing people
  for a number of kernel releases, preventing their systems from
  suspending properly.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (41 commits)
  USB: fix gathering of interface associations
  usb: ehci-sh: fix illegal phy_init() running when platform_data is NULL
  usb: cdc-acm: fix devices not unthrottled on open
  Fix OMAP EHCI suspend/resume failure (i693)
  USB: ohci-hub: Mark ohci_finish_controller_resume() as __maybe_unused
  usb: use usb_serial_put in usb_serial_probe errors
  USB: EHCI: Fix build warning in xilinx ehci driver
  USB: fix PS3 EHCI systems
  xHCI: Increase the timeout for controller save/restore state operation
  xhci: Don't free endpoints in xhci_mem_cleanup()
  xhci: Fix invalid loop check in xhci_free_tt_info()
  xhci: Fix error path return value.
  USB: Checking the wrong variable in usb_disable_lpm()
  usb-storage: Add 090c:1000 to unusal-devs
  USB: serial-generic: use a single set of device IDs
  USB: serial: Enforce USB driver and USB serial driver match
  USB: add NO_D3_DURING_SLEEP flag and revert 151b612847
  USB: option: add more YUGA device ids
  USB: mos7840: Fix compilation of usb serial driver
  USB: option: fix memory leak
  ...
2012-06-15 17:10:02 -07:00
Linus Torvalds
8e53ed10f8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide
Pull IDE fixes from David S. Miller:

1) Two fixes to icside, one for a build failure and another for a
   warning.  From Christian Dietrich.

2) Fix a bit operation that did erroneous masking, from Julia Lawall.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  drivers/ide/ide-cs.c: adjust suspicious bit operation
  ide: icside.c: fix printk format string compile warning
  ide: icside.c: Fix compile with CONFIG_BLK_DEV_IDEDMA_ICS=n
2012-06-15 17:07:48 -07:00
Linus Torvalds
a41b0e7156 Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull target updates from Nicholas Bellinger:
 "This series contains post merge qla_target.c / tcm_qla2xxx bugfixes
  from the past weeks, including the patch to allow target-core to use
  an optional session shutdown callback to help address an active I/O
  shutdown bug in tcm_qla2xxx code (Joern).

  Also included is a target regression bugfix releated to explict ALUA
  target port group CDB emulation that is CC'ed to stable (Roland)."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  qla2xxx: Remove version.h header file inclusion
  tcm_qla2xxx: Handle malformed wwn strings properly
  tcm_qla2xxx: tcm_qla2xxx_handle_tmr() can be static
  qla2xxx: Don't leak commands we give up on in qlt_do_work()
  qla2xxx: Don't crash if we can't find cmd for failed CTIO
  tcm_qla2xxx: Don't insert nacls without sessions into the btree
  target: Return error to initiator if SET TARGET PORT GROUPS emulation fails
  tcm_qla2xxx: Clear session s_id + loop_id earlier during shutdown
  tcm_qla2xxx: Convert to TFO->put_session() usage
  target: Add TFO->put_session() caller for HW fabric session shutdown
2012-06-15 16:07:24 -07:00
David S. Miller
7e52b33bd5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/ipv6/route.c

This deals with a merge conflict between the net-next addition of the
inetpeer network namespace ops, and Thomas Graf's bug fix in
2a0c451ade which makes sure we don't
register /proc/net/ipv6_route before it is actually safe to do so.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-15 15:51:55 -07:00
Dan Carpenter
0f6efff925 qlcnic: off by one in qlcnic_init_pci_info()
The adapter->npars[] array has QLCNIC_MAX_PCI_FUNC elements.  We
allocate it that way a few lines earlier in the function.  So this test
is off by one.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-15 15:30:15 -07:00
Eric Dumazet
bc14786a10 bnx2x: fix panic when TX ring is full
There is a off by one error in the minimal number of BD in
bnx2x_start_xmit() and bnx2x_tx_int() before stopping/resuming tx queue.

A full size GSO packet, with data included in skb->head really needs
(MAX_SKB_FRAGS + 4) BDs, because of bnx2x_tx_split()

This error triggers if BQL is disabled and heavy TCP transmit traffic
occurs.

bnx2x_tx_split() definitely can be called, remove a wrong comment.

Reported-by: Tomas Hruby <thruby@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Yaniv Rosner <yanivr@broadcom.com>
Cc: Merav Sicron <meravs@broadcom.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Robert Evans <evansr@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-15 15:30:15 -07:00
Dan Carpenter
d9cb9bd63e can: c_can: precedence error in c_can_chip_config()
(CAN_CTRLMODE_LISTENONLY & CAN_CTRLMODE_LOOPBACK) is (0x02 & 0x01) which
is zero so the condition is never true.  The intent here was to test
that both flags were set.

Cc: <stable@kernel.org> # 2.6.39+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-15 15:25:56 -07:00
Jesper Dangaard Brouer
71c421dbd9 usb: correct trivial typo in drivers/usb/host/Kconfig
Correct "Enbale" -> "Enable", in the desc for USB_HCD_BCMA
and USB_HCD_SSB.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 15:05:34 -07:00
Kay Sievers
e2ae715d66 kmsg - kmsg_dump() use iterator to receive log buffer content
Provide an iterator to receive the log buffer content, and convert all
kmsg_dump() users to it.

The structured data in the kmsg buffer now contains binary data, which
should no longer be copied verbatim to the kmsg_dump() users.

The iterator should provide reliable access to the buffer data, and also
supports proper log line-aware chunking of data while iterating.

Signed-off-by: Kay Sievers <kay@vrfy.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Reported-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Tested-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:53:59 -07:00
Lubomir Schmidt
3026b0e942 staging: r8712u: Add new USB IDs
There are two new devices for this driver.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:50:04 -07:00
H Hartley Sweeten
dc348147a9 staging: comedi: fix Kconfig for COMEDI_PCMCIA_DRIVERS
The depends on PCCARD is redundant. All of the comedi PCMCIA
drivers depend on PCMCIA which can only be enabled if PCCARD
is enabled. Remove the extra depends check.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Tested-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:46:49 -07:00
Lars-Peter Clausen
aff1eb4e3d iio: buffer: Fix NULL pointer deref caused by empty scan mask
iio_scan_mask_match() returns NULL if the passed in scan mask is empty. This
will happen if no channel has been selected and buffer is enabled.
iio_sw_buffer_preenable() will assign NULL to indio_dev->active_scan_mask in
this case. As a result iio_update_demux() will cause a NULL pointer deref,
because it expects active_scan_mask to be non-NULL.

Since it does not make much sense to start data capture if there is no data to
capture this patch updates the code to fail gracefully in iio_scan_mask_match()
instead of crashing the kernel.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:39:19 -07:00
Peter Meerwald
60ba16e35b staging: iio:: fix some typos
typos in comments, fix ring_sw module description

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:39:18 -07:00
Peter Meerwald
a21601463d staging: iio: add IIO_ALTVOLTAGE to iio_event_monitor example
IIO_ALTVOLTAGE is used by frequency/adf4350 and frequency/ad9523

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:39:18 -07:00
Lars-Peter Clausen
eaedfa54db staging: iio: Remove superfluous flush_scheduled_work
None of these drivers ever schedule any work, so there is no need to flush any
scheduled work when the driver is removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:36:26 -07:00
Peter Meerwald
25c38aa3d1 staging: iio: fix typos in simple dummy driver
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:36:26 -07:00
Lars-Peter Clausen
07a8329c48 staging:iio:adis16400: Fix ADIS163xx AUX_ADC address
The ADIS163xx variants use a different register address for the auxiliary ADC
channel than the ADIS16400. This patch fixes them to use the correct address.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:36:25 -07:00
Lars-Peter Clausen
bb7cf8bc52 staging:iio:adis16400: Fix ADIS16334 temperature address
The channel spec for ADUS16334's temperature channel uses the address and scan
index for the Z-axis acceleration channel. This patch fixes it to use the
temperature channel address and scan index instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:36:25 -07:00
Lars-Peter Clausen
6f30592e8c staging:iio:adis16400: Fix ADIS16300 temperature address
The ADIS16300 uses the same address for the temperature register as the
ADIS16350 and not the same as the ADIS16400.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:36:25 -07:00
Lars-Peter Clausen
791de6771e staging:iio:adis16400: Fix ADIS16300 ROLL_OUT register address
In the current driver ROLL_OUT register address is the same as the PITCH_OUT
register address. This patch fixes it to use the correct address.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:36:25 -07:00
Axel Lin
d03fcfe626 iio: dac: Convert ad5380 to devm_regmap_* APIs
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:36:25 -07:00
Sage Weil
9a64e8e0ac Linux 3.5-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPyr4LAAoJEHm+PkMAQRiGhvMH/1uXaDmJiiyAtMhC9kQbLclK
 5RpUOV+ukRrPXBJhwWGEZvC9G/DiWAfZ/19Ee6qTGZbA46yxkgZklqO+bw7fuOLH
 dPf4MNXdhgOgbs0KkVAk6aXIYzIU836pcYg+LcapG8E8SZp3SWbJzrVbUPFwPM+m
 Sv11ZcpJfM2HH9wFRdKErUOiZHsMY+LZHcw0nx+BObytjgzBbzHNkpF57F714TUO
 QplYpIToO3XtGhIM1yRDxww+2zFlVNsCZ8IC57EDbLb8BMZWuyZoFgWZqLAnrU0u
 vy7CHLledMSvs855juJ9JxGo/EDnfwJpCnjmcp8BY+h4b5T/k5mGK6d9aeXYRf4=
 =CcWn
 -----END PGP SIGNATURE-----

Merge tag 'v3.5-rc1'

Linux 3.5-rc1

Conflicts:
	net/ceph/messenger.c
2012-06-15 12:32:04 -07:00
Suresh Siddha
7eb9ae0799 irq/apic: Use config_enabled(CONFIG_SMP) checks to clean up irq_set_affinity() for UP
Move the ->irq_set_affinity() routines out of the #ifdef CONFIG_SMP
sections and use config_enabled(CONFIG_SMP) checks inside those
routines. Thus making those routines simple null stubs for
!CONFIG_SMP and retaining those routines with no additional
runtime overhead for CONFIG_SMP kernels.

Cleans up the ifdef CONFIG_SMP in and around routines related to
irq_set_affinity in io_apic and irq_remapping subsystems.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: torvalds@linux-foundation.org
Cc: joerg.roedel@amd.com
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: http://lkml.kernel.org/r/1339723729.3475.63.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-15 14:17:29 +02:00
Pratyush Anand
1591633ed6 usb: dwc3: giveback all queued request when ep disabled or reset received
In case of ep_disable and reset interrupt is received and, still there
was at least one request queued for dma transfer, then endpoint is
stopped first. Once endpoint is stopped, callback for all queued
request must be called.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-15 14:43:44 +03:00
Pratyush Anand
e8d4e8be86 usb: dwc3: fix giveback of queued request in ep_dequeue
In case of ep_dequeue , if dequeued request was submitted for dma
transfer, then endpoint is stopped. Once endpoint is stooped, callback
for the dequeued request must be called.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-15 14:42:49 +03:00