Commit graph

211,834 commits

Author SHA1 Message Date
Sagi Grimberg
b5b8e2989e Target/dif: Introduce protection-passthough-only mode
Some transports (iSCSI/iSER/SRP/FC) support hardware INSERT/STRIP
capabilities while other transports like loopback/vhost-scsi need
perform this is software.

This patch allows fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC
to signal the early LUN scan handling case where PROTECT CDB bits
are set, but no fabric buffer has been provided.

For transports which use generic new command these buffers have yet
to be allocated.

Also this way, target may support protection information
against legacy initiators (writes are inserted and reads
are stripped).

(Only set prot_pto for loopback during early special case - nab)

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07 01:48:42 -07:00
Sagi Grimberg
80dcd0c104 Target/file: place escape values for protection information format
No need to actually compute protection information when formatting

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07 01:48:39 -07:00
Sagi Grimberg
19f9361af7 Target/sbc: Set protection operation and relevant checks
SBC-3 mandates the protection checks that must be
performed in the rdprotect/wrprotect field. Use them.
According to backstore device pi_attributes and
cdb rdprotect/wrprotect field.

(Fix incorrect se_cmd->prot_type -> TARGET_PROT_NORMAL
 comparision in transport_generic_new_cmd - nab)
(Fix missing break in sbc_set_prot_op_checks - DanC + Sagi)

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-13 12:03:02 -07:00
Sagi Grimberg
acb2bde3e3 Target/transport: Allocate protection sg if needed
In case protection information is involved, allocate
protection SG-list for transport.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-13 12:03:02 -07:00
Paul Bolle
1e3ab99da6 target: silence GCC warning in target_alua_state_check
Building target_core_alua.o triggers a GCC warning:
    drivers/target/target_core_alua.c: In function ‘target_alua_state_check’:
    drivers/target/target_core_alua.c:773:18: warning: ‘alua_ascq’ may be used uninitialized in this function [-Wmaybe-uninitialized]
       cmd->scsi_ascq = alua_ascq;
                      ^

This is a false positive. A little trial and error shows it is
apparently caused by core_alua_state_lba_dependent(). It must be hard
for GCC to track the branches of a switch statement, inside a
list_for_each_entry loop, inside a while loop.

But if we add a small (inline) helper function we can reorganize the
code a bit. That also allows to drop alua_ascq which, obviously, gets
rid of this warning.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-13 12:02:05 -07:00
Nicholas Bellinger
5aad2145ac Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband into for-next 2014-03-13 12:01:58 -07:00
Linus Torvalds
79e615420c ARM: SoC fixes for 3.14-rc
A collection of fixes for ARM platforms. A little large due to us missing to
 do one last week, but there's nothing in particular here that is in itself
 large and scary.
 
 Mostly a handful of smaller fixes all over the place. The majority is made
 up of fixes for OMAP, but there are a few for others as well. In particular,
 there was a decision to rename a binding for the Broadcom pinctrl block that
 we need to go in before the final release since we then treat it as ABI.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTHKFOAAoJEIwa5zzehBx36EoP/0K7ts9qrShYUD2ASy9HuFKj
 cUcIHF+c0203bavIZzP5EQW/m7TGSybjO8UwkOaLv5SL6E9fn8rR01mmKpONeZbN
 E40ANvOxP3FdWWUFzZSh4oyaX0abaPUtPaYBavakHQI2Ej2m4UmpXAWUkCUGt9Om
 sXSAYuOi6tmpy40aimpaI1QBtx/eyxxJgEBKcbFBvhp1P3d56LTtoqmzACxBFU/8
 4NJIXuZlXTmXV9qIX+y4yXDhmVb6c/gEbNeLJ2F3yWzEeTgnMeycDb8o27Jl6Ii4
 rjsT25qplW5zvUODuhU6QUjuipPh8+WtyF8ruKMakxMNkVoGAC2flWw2TBR09tVj
 zIqYP7/vDhCEYcw4g/BqR8tEvojWt2m7Hm5y+oQY3qmCtLewL6TYeXZcXWFLCwSk
 m4zSvzZOsRsZWsZcflJKZr3g5vsjbg3vtoc3pOZaN4UcqEhU1HCtMfN3znnXIhtj
 xGWqN22S3OpGM0lzLY95lnVeLdrs6eX/ZY23BG1OV4OcDWM4nYwAxEq94QgPvSxR
 9E/fFhU2DZIulEA5Z+/PIReUCLuNL709zqnyAG9VTvbeC24sdr0W6bEM08O85xan
 kb7sbYRnt4qr4uOhPCi7wIENY4rrS91dcE3XZUhJtLWi/0jj+pHT9VoggyS4QdtS
 aWRhg70S5M6quMEoIOzg
 =YBim
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from from Olof Johansson:
 "A collection of fixes for ARM platforms.  A little large due to us
  missing to do one last week, but there's nothing in particular here
  that is in itself large and scary.

  Mostly a handful of smaller fixes all over the place.  The majority is
  made up of fixes for OMAP, but there are a few for others as well.  In
  particular, there was a decision to rename a binding for the Broadcom
  pinctrl block that we need to go in before the final release since we
  then treat it as ABI"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: omap3-gta04: Add ti,omap36xx to compatible property to avoid problems with booting
  ARM: tegra: add LED options back into tegra_defconfig
  ARM: dts: omap3-igep: fix boot fail due wrong compatible match
  ARM: OMAP3: Fix pinctrl interrupts for core2
  pinctrl: Rename Broadcom Capri pinctrl binding
  pinctrl: refer to updated dt binding string.
  Update dtsi with new pinctrl compatible string
  ARM: OMAP: Kill warning in CPUIDLE code with !CONFIG_SMP
  ARM: OMAP2+: Add support for thumb mode on DT booted N900
  ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
  ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4
  ARM: DRA7: hwmod data: correct the sysc data for spinlock
  ARM: OMAP5: PRM: Fix reboot handling
  ARM: sunxi: dt: Change the touchscreen compatibles
  ARM: sun7i: dt: Fix interrupt trigger types
2014-03-09 19:27:31 -07:00
Linus Torvalds
cf8bf7cd13 USB fixes for 3.14-rc6
Here are 4 USB fixes for your current tree.
 
 Two of them are reverts to hopefully resolve the nasty XHCI regressions
 we have been having on some types of devices.  The other two are quirks
 for some Logitech video devices.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlMbu0sACgkQMUfUDdst+yl/MgCeJbq5Lre/M59O5YVWhS3fghsG
 PisAoI7t2LLnhiC/DwZD10vs2hEkZxw2
 =R/Qt
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are 4 USB fixes for your current tree.

  Two of them are reverts to hopefully resolve the nasty XHCI
  regressions we have been having on some types of devices.  The other
  two are quirks for some Logitech video devices"

* tag 'usb-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "USBNET: ax88179_178a: enable tso if usb host supports sg dma"
  Revert "xhci 1.0: Limit arbitrarily-aligned scatter gather."
  usb: Make DELAY_INIT quirk wait 100ms between Get Configuration requests
  usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e
2014-03-09 18:59:14 -07:00
Linus Torvalds
a491ce72f8 Staging driver tree fix for 3.14-rc6
Here is a single staging driver fix for your tree.
 
 It resolves an issue with arbritary writes to memory if a specific
 driver is loaded.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlMbwF4ACgkQMUfUDdst+ynSIwCZAfb/XkCqRqnzW8nfAOqITRP9
 VwUAoMHjGSr6mBbXFzHz5QoxGwylY+dW
 =+BBI
 -----END PGP SIGNATURE-----

Merge tag 'staging-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver tree fix from Greg KH:
 "Here is a single staging driver fix for your tree.

  It resolves an issue with arbritary writes to memory if a specific
  driver is loaded"

* tag 'staging-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging/cxt1e1/linux.c: Correct arbitrary memory write in c4_ioctl()
2014-03-09 18:58:27 -07:00
Linus Torvalds
1dc3217dad Merge branch 'for-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal fixes from Zhang Rui:
 "Specifics:

   - Update the help text of INT3403 Thermal driver, which was not
     friendly to users.  From Zhang Rui.

   - The "type" sysfs attribute of x86_pkg_temp_thermal registered
     thermal zones includes an instance number, which makes the
     thermal-to-hwmon bridge fails to group them all in a single hwmon
     device.  Fixed by Jean Delvare.

   - The hwmon device registered by x86_pkg_temp_thermal driver is
     redundant because the temperature value reported by
     x86_pkg_temp_thermal is already reported by the coretemp driver.
     Fixed by Jean Delvare.

   - Fix a problem that the cooling device can not be updated properly
     if it is initialized at max cooling state.  From Ni Wade.

   - Fix a problem that OF registered thermal zones are running without
     thermal governors.  From Zhang Rui.

   - Commit beeb5a1e0e ("thermal: rcar-thermal: Enable driver
     compilation with COMPILE_TEST") broke build on archs wihout io
     memory.  Thus make it depend on HAS_IOMEM to bypass build failures.
     Fixed by Richard Weinberger"

* 'for-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  Thermal: thermal zone governor fix
  Thermal: Allow first update of cooling device state
  thermal,rcar_thermal: Add dependency on HAS_IOMEM
  x86_pkg_temp_thermal: Fix the thermal zone type
  x86_pkg_temp_thermal: Do not expose as a hwmon device
  Thermal: update INT3404 thermal driver help text
2014-03-09 13:52:53 -07:00
Linus Torvalds
4aa41ba7f7 spi: Fixes for v3.14
A scattering of driver specific fixes here.  The fixes from Axel cover
 bitrot in apparently unmaintained drivers, the at79 bug is fixing a
 glitch on /CS during initialisation of some devices which could break
 some slaves and the remainder are fixes for recently introduced bugs
 from the past release cycle or so.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIbBAABAgAGBQJTGVKmAAoJELSic+t+oim9us4P9RSbIcwJWobTy2Px/7yPH2e9
 mAjlTVnBQ2EqwPAI+iro1xQfTeeyn3fAkdINrkWe6xGkbXH4n4OezWZzdH0VbPFV
 buUPc9EYt8FysG/Xne3nyW3cCDzv0+CzvD5CY/83SDa2YMd+2134dxb/8UOpLE+Q
 ptde7EsR11z2XF9PLdm4Wc7ouGEczm3zfbgy1v1uO0UZqeFe8sbzroYLdTZnRYZ5
 s9BD3hUgcB9+cV/v4gv988hYhofmvmsYluBmo8Q7OVgMJ90ne281P8X9CqxEEn1w
 vsebrQ3xFIybDk1GGp79IMTyNooX48+2eTalsJa4+eWsGYpZjMW7wHx+pYX5pqnI
 hxrKU4yXQ8Sa7CMwfGcLgzJpa7DPbTKJZrw7X1x71+Pu8HcBHEKO1xKJ9YNY98Kd
 B0zvdPaYmEFX5e4T7Tv2opk3TVYZtrlNmu16DxgktzYEUdArkDZAV0SVHMtGzpGn
 /AMtvm5LIH58smyhdsocQtdddjE2oELVuLqtfIZgq8KuARmFYVzDro/q9BXcJMWK
 0LJCscr4bxljFEm+NDhPTwtQ1TX3Ahl+sTDkyx1sYjfQXEUsJyP0YesLqbyIP1xY
 gzAURogPooS7Gz4ggkyZv0cvcsKcziXvf4MYpIKT58HjfVgGk5Kk7LU6E2eUJMXU
 AzmQoeKfWrIUzKYOk8w=
 =2e3U
 -----END PGP SIGNATURE-----

Merge tag 'spi-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A scattering of driver specific fixes here.

  The fixes from Axel cover bitrot in apparently unmaintained drivers,
  the at79 bug is fixing a glitch on /CS during initialisation of some
  devices which could break some slaves and the remainder are fixes for
  recently introduced bugs from the past release cycle or so"

* tag 'spi-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: atmel: add missing spi_master_{resume,suspend} calls to PM callbacks
  spi: coldfire-qspi: Fix getting correct address for *mcfqspi
  spi: fsl-dspi: Fix getting correct address for master
  spi: spi-ath79: fix initial GPIO CS line setup
  spi: spi-imx: spi_imx_remove: do not disable disabled clocks
  spi-topcliff-pch: Fix probing when DMA mode is used
  spi/topcliff-pch: Fix DMA channel
2014-03-09 13:51:47 -07:00
Linus Torvalds
66a523db70 Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
 "This series addresses a number of outstanding issues wrt to active I/O
  shutdown using iser-target.  This includes:

   - Fix a long standing tpg_state bug where a tpg could be referenced
     during explicit shutdown (v3.1+ stable)
   - Use list_del_init for iscsi_cmd->i_conn_node so list_empty checks
     work as expected (v3.10+ stable)
   - Fix a isert_conn->state related hung task bug + ensure outstanding
     I/O completes during session shutdown.  (v3.10+ stable)
   - Fix isert_conn->post_send_buf_count accounting for RDMA READ/WRITEs
     (v3.10+ stable)
   - Ignore FRWR completions during active I/O shutdown (v3.12+ stable)
   - Fix command leakage for interrupt coalescing during active I/O
     shutdown (v3.13+ stable)

  Also included is another DIF emulation fix from Sagi specific to
  v3.14-rc code"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  Target/sbc: Fix sbc_copy_prot for offset scatters
  iser-target: Fix command leak for tx_desc->comp_llnode_batch
  iser-target: Ignore completions for FRWRs in isert_cq_tx_work
  iser-target: Fix post_send_buf_count for RDMA READ/WRITE
  iscsi/iser-target: Fix isert_conn->state hung shutdown issues
  iscsi/iser-target: Use list_del_init for ->i_conn_node
  iscsi-target: Fix iscsit_get_tpg_from_np tpg_state bug
2014-03-09 13:50:14 -07:00
Rafael J. Wysocki
4c7b70406e Revert "ACPI / sleep: pm_power_off needs more sanity checks to be installed"
Revert commit 3130497f5b ("ACPI / sleep: pm_power_off needs more
sanity checks to be installed") that breaks power ACPI power off on a
lot of systems, because it checks wrong registers.

Fixes: 3130497f5b ("ACPI / sleep: pm_power_off needs more sanity checks to be installed")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-09 13:48:36 -07:00
Linus Torvalds
15b04859a2 Merge branch 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
 "Just a couple patches blacklisting more broken devices"

* 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8 (2BA30001)
  libata: disable queued TRIM for Crucial M500 mSATA SSDs
2014-03-08 11:52:45 -08:00
Linus Torvalds
9f93585fdf Merge branch 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
 "This pull request contains a workqueue usage fix for firewire.

  For quite a long time now, workqueue only treats two work items
  identical iff both their addresses and callbacks match.  This is to
  avoid introducing false dependency through the work item being
  recycled while being executed.  This changes non-reentrancy guarantee
  for the users of PREPARE[_DELAYED]_WORK() - if the function changes,
  reentrancy isn't guaranteed against the previous instance.  Firewire
  depended on such nonreentrancy guarantee.

  This is fixed by doing the work item multiplexing from firewire proper
  while keeping the work function unchanged"

* 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  firewire: don't use PREPARE_DELAYED_WORK
2014-03-08 11:51:13 -08:00
Linus Torvalds
85ec688c16 Fix a use-after-free regression since v3.4 and an initialization
regression since v3.10.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTGuNHAAoJEHnzb7JUXXnQlAIP/Ax3QGivoxC4GnidUMWoDwhV
 qYLuq6RQyM2GIT/hkUn5yfcWfJvPw4C4zfVehs5gOER+HrN1gRmQA3Ic00VIIqZm
 hpvVCZNzfCJMFK9ipkLvOLEdHZkqTyZYWWQFa8IdWGztkWshrZkGih/xImr8YWQb
 oOxoCC/548m/R5pdlXCplb2KUZWdpyamvpPxj24obYd1byS+s2gHxx2tGO1coAHR
 BP/L+qzWTRh0oW4TzHYUFfVoUy26wIUuB3WZKn1EuhVp7q+UJ9JXQpbwFp2vYREg
 4OC/f0TySTLMFjEBu5TD/Z8tDNZXLyljuO8nniTRkPqujBqJqveub7xEdtMhXx5a
 JvlDDhqALthVE4zse72swA3kshzkAveHXRDmHjIlNrz6ei/mkyjFsk1gWnza22YA
 1BZjhYAQjrv3MDRPD21e7LtNfOWfniNcSC6KeJc8h3MMXlkUX8wKiGdjDtujOnGE
 rQ2QAFQdQv7yYavWcH0nbHFqWH5sbct7LVIPJ64lg3pleVXGmc/XGoXNpPykQRJn
 WcUXcbO7dc4e8AHIe3DVlUW/KgiucqiLPhC5jpukrXZc039glpOeDPrTeeXYrBaD
 UuZ6w8s7S1MmYBbop5bBW6MJHOQcn0jyej8QnYhoClZ7VcAnUezPz1rxx+hUq+H+
 ov4pftNGrTVd/pexsYvN
 =F0Ho
 -----END PGP SIGNATURE-----

Merge tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Stefan Richter:
 "Fix a use-after-free regression since v3.4 and an initialization
  regression since v3.10"

* tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: fix probe failure with Agere/LSI controllers
  firewire: net: fix use after free
2014-03-08 10:52:43 -08:00
Linus Torvalds
7bffc48177 Single fix for a clock driver merged in 3.14-rc1. Without this fix the
CPU frequency cannot be scaled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTGoj7AAoJEDqPOy9afJhJm6oQAMEw19Xyz/Of4n4/7sTogL+G
 SXSQK9Ava2rbYNaPrU267dpgFausCQZNIN2uCsrvQtIsWq6ScInKgVxjXUHhE2rm
 F2UkapBBctPhJYKS1W+6WzZzUNNE1Lo4Ab33GlpWV+DBZlJ/XFVDmgbtEs/H59lC
 woedh6q9JZSDa8QSk8t4gG7Fkk15ImgXI2pm9/WiCkh7ZHLgBPTGOpe9rVOiieNf
 uzALWBhpgySEJXDjqK2O6cbng11EvUJGmLYxrOwfOBwcnLe4fk6t26KEovT0e/2s
 HidGVoiGSMWZfY1xrnHaehJvqO7qu7iBsWfn5KRFoMW7NbjDKFUg5YfEIjuh3R/J
 KSEHovNO/PmS2xyQowLplgP2pAuHfZ80oRgsOWZ1fG3CCfXghfr5WVMAL1pqtSQV
 HzTqm+Aiaf4rbKOTcGISYBjG+X7/wU0w/tvDgjpoMo08mR+RmmTC0wkauWXmDOZQ
 P91lWuUtSbpY2B9JdjVNHKTLWpKD8nDBV+aTXj4OwxVIk6s9FhNw6+++9l46OrT8
 02BVhU0Z3rg20o69Nx1vShQFN7vhxsKXC9UePdpt3NnlgUUe1JYiVe44ut/AMr5O
 PIAXQQXj+zgFQX8PdKtLAvRO2DnF4OpCH758AXywmarYZYDahmc6XSJTEqsk3Tbt
 rQCfsnVwgbyQTHfvgqk7
 =UEPE
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux

Pull clk driver fix from Mike Turquette:
 "Single fix for a clock driver merged in 3.14-rc1.  Without this fix
  the CPU frequency cannot be scaled"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: shmobile: rcar-gen2: Use kick bit to allow Z clock frequency change
2014-03-08 10:51:30 -08:00
Linus Torvalds
abfba60c7a ACPI and power management fixes for 3.14-rc6
- ACPI tables in some BIOSes list device resources with size equal
    to 0, which doesn't make sense, so we should ignore them, but
    instead we try to use them and mangle things completely.  Fix
    from Zhang Rui.
 
  - Several models of Samsung laptops accumulate EC events when they
    are in sleep states which leads to EC buffer overflows that prevent
    new events from being signaled after system resume or reboot.  This
    has been affecting many users for quite a while and may be addressed
    by clearing the EC buffer during system resume and system startup on
    those machines.  From Kieran Clancy.
 
  - If the ACPI sleep control and status registers are not present
    (which  happens if the Hardware Reduced ACPI mode bit is set in
    the ACPI tables, but also may result from BIOS bugs), we should
    not try to use ACPI to power off the system and ACPI S5 should
    not be listed as supported.  Fix from Aubrey Li.
 
  - There's a race condition in cpufreq_get() that leads to a kernel
    crash if that function is called at a wrong time.  Fix from
    Aaron Plattner.
 
  - cpufreq policy objects have to be initialized entirely before
    they are first accessed by their users which isn't the case
    currently and that potentially leads to various kinds of
    breakage that is difficult to debug.  Fix from Viresh Kumar.
 
  - Locking is missing in __cpufreq_add_dev() which leads to a race
    condition that may trigger a kernel crash.  Fix from Viresh Kumar.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTGnQlAAoJEILEb/54YlRxc8EP/jK95zPwkMwASjNR1s/Gs7/Y
 dx4qOYsWSs0Iutn1syyEg57TgjS/14z0UgOnYRiRHAFP+9610SLjZkZZelYQMgFE
 N4NyQJB7rTL+ycGH1oovbWQPQlewx4aX6p6XNg4bQHTHwxiik/gS6G7rW4Edxt+h
 BIc0SXDf/ldsDJk42v4ie0lSmIRtFF789cXvESi6KmLyNuwiuvGo25uCODVTZxAz
 h/ekjcF3PrbAsTeI+yw4J8pceI/IxXksdHp08jQsS7/QYGnMTGo3PXX3NfgSszbg
 WPPgk409AHjgGPgtWjkVXCChJbKJ57CtHVQ+PG8EYZy+yMTRLWEhxfGcg9sjcKaJ
 Z5gvCQz/g7vF0zk4ScMb6Re+t53lN3SsPwsROj2p/RD7X8uLWIi0Ocuk+iLhermv
 HOEg0Loo6gAN3QiviPjUhtVK1cNu3zuCuTbjhDq6L6S4t1LsnbIWd3QdoUBn1GM+
 wIgFK/qu11m6QV3q8dlAxE/iMZQ8KrixlKfETPXK6KlrWBPA4v5H4lu5IjNEsmd0
 tPbNPFhR4zzlV3QVzlk1NYCV9TxIX7kMl5CIZERLpzkzg9UkgJuaatQx7UjwCcxL
 JTUtMxmHGL7m8ToVJgOcBo+WIjRIEGdQ53ZoB0WndwHYuRIt78WoNP5xTi84JEOk
 AE/Od2/YjC/lb8u/gxK4
 =57PZ
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management fixes from Rafael Wysocki:

 - ACPI tables in some BIOSes list device resources with size equal to
   0, which doesn't make sense, so we should ignore them, but instead we
   try to use them and mangle things completely.  Fix from Zhang Rui.

 - Several models of Samsung laptops accumulate EC events when they are
   in sleep states which leads to EC buffer overflows that prevent new
   events from being signaled after system resume or reboot.  This has
   been affecting many users for quite a while and may be addressed by
   clearing the EC buffer during system resume and system startup on
   those machines.  From Kieran Clancy.

 - If the ACPI sleep control and status registers are not present (which
   happens if the Hardware Reduced ACPI mode bit is set in the ACPI
   tables, but also may result from BIOS bugs), we should not try to use
   ACPI to power off the system and ACPI S5 should not be listed as
   supported.  Fix from Aubrey Li.

 - There's a race condition in cpufreq_get() that leads to a kernel
   crash if that function is called at a wrong time.  Fix from Aaron
   Plattner.

 - cpufreq policy objects have to be initialized entirely before they
   are first accessed by their users which isn't the case currently and
   that potentially leads to various kinds of breakage that is difficult
   to debug.  Fix from Viresh Kumar.

 - Locking is missing in __cpufreq_add_dev() which leads to a race
   condition that may trigger a kernel crash.  Fix from Viresh Kumar.

* tag 'pm+acpi-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / EC: Clear stale EC events on Samsung systems
  cpufreq: Initialize governor for a new policy under policy->rwsem
  cpufreq: Initialize policy before making it available for others to use
  cpufreq: use cpufreq_cpu_get() to avoid cpufreq_get() race conditions
  ACPI / sleep: pm_power_off needs more sanity checks to be installed
  ACPI / resources: ignore invalid ACPI device resources
2014-03-08 09:17:27 -08:00
Rafael J. Wysocki
19bc45a59c Merge branch 'pm-cpufreq'
* pm-cpufreq:
  cpufreq: Initialize governor for a new policy under policy->rwsem
  cpufreq: Initialize policy before making it available for others to use
  cpufreq: use cpufreq_cpu_get() to avoid cpufreq_get() race conditions
2014-03-08 01:07:31 +01:00
Rafael J. Wysocki
beb0082efd Merge branches 'acpi-resources', 'acpi-ec' and 'acpi-sleep'
* acpi-resources:
  ACPI / resources: ignore invalid ACPI device resources

* acpi-ec:
  ACPI / EC: Clear stale EC events on Samsung systems

* acpi-sleep:
  ACPI / sleep: pm_power_off needs more sanity checks to be installed
2014-03-08 01:07:06 +01:00
Linus Torvalds
2ef176f11a A dm-cache memory allocation failure fix, fix DM's Kconfig identation, a
dm-snapshot metadata corruption fix for bug introduced in 3.14-rc1, an
 important refcount < 0 fix for the DM persistent data library's space
 map metadata interface which fixes corruption reported by a few dm-thinp
 users, and last but not least: more extensive fixes than ideal for
 dm-thinp's data resize capability (which has had growing pain much like
 we've seen from -ENOSPC handling of filesystems that mature).  The end
 result is dm-thinp now handles metadata operation failure and no data
 space error conditions much better than before.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTGgE3AAoJEMUj8QotnQNas7MIAODA8i3lh5c16lyqrvyIK1ql
 AcYll4ZFAob85JLNiirDZdlQQe9UIB8YeGSnlXfQrxHRD+OEe5cWdpE+wc53kQjZ
 upHDBd2Ai+rBWkUBJdrkju/OSXfVeCxHJNBaxZyyO9msQ8H1cdtxvwMj19HaYdeQ
 AexoUeX7dbmcVfdAuJS1yvknxT1z/3BOg8SHxqtL6Jnmph/jngCWW4ElbtA+vCeK
 0K4w19WMb3sdVxzrr1TzEwRxc6C5+jwN5TT3h/RnrU60+EGYK1HUZZ1b0TWMlQ3v
 uoQ0a9JYmHb7heUB5XdwM6GB3N9jcu0lAKPNYI5JJKTJS5tU4KgdtP89Sf+tsNI=
 =UQtZ
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - dm-cache memory allocation failure fix
 - fix DM's Kconfig identation
 - dm-snapshot metadata corruption fix for bug introduced in 3.14-rc1
 - important refcount < 0 fix for the DM persistent data library's space
   map metadata interface which fixes corruption reported by a few
   dm-thinp users

and last but not least:

 - more extensive fixes than ideal for dm-thinp's data resize capability
   (which has had growing pain much like we've seen from -ENOSPC
   handling of filesystems that mature).

   The end result is dm-thinp now handles metadata operation failure and
   no data space error conditions much better than before.

* tag 'dm-3.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm space map metadata: fix refcount decrement below 0 which caused corruption
  dm thin: fix Documentation for held metadata root feature
  dm thin: fix noflush suspend IO queueing
  dm thin: fix deadlock in __requeue_bio_list
  dm thin: fix out of data space handling
  dm thin: ensure user takes action to validate data and metadata consistency
  dm thin: synchronize the pool mode during suspend
  dm snapshot: fix metadata corruption
  dm: fix Kconfig indentation
  dm cache mq: fix memory allocation failure for large cache devices
2014-03-07 15:17:36 -08:00
Mathias Nyman
469d417b68 Revert "USBNET: ax88179_178a: enable tso if usb host supports sg dma"
This reverts commit 3804fad454.

This commit, together with commit 247bf55727
"xhci 1.0: Limit arbitrarily-aligned scatter gather." were
origially added to get xHCI 1.0 hosts and usb ethernet ax88179_178a devices
working together with scatter gather. xHCI 1.0 hosts pose some requirement on how transfer
buffers are aligned, setting this requirement for 1.0 hosts caused USB 3.0 mass
storage devices to fail more frequently.

USB 3.0 mass storage devices used to work before 3.14-rc1.  Theoretically,
the TD fragment rules could have caused an occasional disk glitch.
Now the devices *will* fail, instead of theoretically failing.
>From a user perspective, this looks like a regression; the USB device obviously
fails on 3.14-rc1, and may sometimes silently fail on prior kernels.

The proper soluition is to implement the TD fragment rules for xHCI 1.0 hosts,
but for now, revert this patch until scatter gather can be properly supported.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-07 11:48:13 -08:00
Mathias Nyman
e2ed511400 Revert "xhci 1.0: Limit arbitrarily-aligned scatter gather."
This reverts commit 247bf55727.

This commit, together with commit 3804fad454
"USBNET: ax88179_178a: enable tso if usb host supports sg dma" were
origially added to get xHCI 1.0 hosts and usb ethernet ax88179_178a devices
working together with scatter gather. xHCI 1.0 hosts pose some requirement on how transfer
buffers are aligned, setting this requirement for 1.0 hosts caused USB 3.0 mass
storage devices to fail more frequently.

USB 3.0 mass storage devices used to work before 3.14-rc1.  Theoretically,
the TD fragment rules could have caused an occasional disk glitch.
Now the devices *will* fail, instead of theoretically failing.
>From a user perspective, this looks like a regression; the USB device obviously
fails on 3.14-rc1, and may sometimes silently fail on prior kernels.

The proper soluition is to implement the TD fragment rules required, but for now
this patch needs to be reverted to get USB 3.0 mass storage devices working at the
level they used to.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-07 11:48:13 -08:00
Julius Werner
d86db25e53 usb: Make DELAY_INIT quirk wait 100ms between Get Configuration requests
The DELAY_INIT quirk only reduces the frequency of enumeration failures
with the Logitech HD Pro C920 and C930e webcams, but does not quite
eliminate them. We have found that adding a delay of 100ms between the
first and second Get Configuration request makes the device enumerate
perfectly reliable even after several weeks of extensive testing. The
reasons for that are anyone's guess, but since the DELAY_INIT quirk
already delays enumeration by a whole second, wating for another 10th of
that isn't really a big deal for the one other device that uses it, and
it will resolve the problems with these webcams.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-07 11:46:51 -08:00
Julius Werner
e0429362ab usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e
We've encountered a rare issue when enumerating two Logitech webcams
after a reboot that doesn't power cycle the USB ports. They are spewing
random data (possibly some leftover UVC buffers) on the second
(full-sized) Get Configuration request of the enumeration phase. Since
the data is random this can potentially cause all kinds of odd behavior,
and since it occasionally happens multiple times (after the kernel
issues another reset due to the garbled configuration descriptor), it is
not always recoverable. Set the USB_DELAY_INIT quirk that seems to work
around the issue.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-07 11:46:51 -08:00
Sagi Grimberg
2dea909444 IB/mlx5: Expose support for signature MR feature
Currently support only T10-DIF types of signature handover operations
(types 1|2|3).

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07 11:40:04 -08:00
Sagi Grimberg
d5436ba010 IB/mlx5: Collect signature error completion
This commit takes care of the generated signature error CQE generated
by the HW (if happened).  The underlying mlx5 driver will handle
signature error completions and will mark the relevant memory region
as dirty.

Once the consumer gets the completion for the transaction, it must
check for signature errors on signature memory region using a new
lightweight verb ib_check_mr_status().

In case the user doesn't check for signature error (i.e. doesn't call
ib_check_mr_status() with status check IB_MR_CHECK_SIG_STATUS), the
memory region cannot be used for another signature operation
(REG_SIG_MR work request will fail).

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07 11:40:04 -08:00
Sagi Grimberg
e6631814fb IB/mlx5: Support IB_WR_REG_SIG_MR
This patch implements IB_WR_REG_SIG_MR posted by the user.

Baisically this WR involves 3 WQEs in order to prepare and properly
register the signature layout:

1. post UMR WR to register the sig_mr in one of two possible ways:
    * In case the user registered a single MR for data so the UMR data segment
      consists of:
      - single klm (data MR) passed by the user
      - BSF with signature attributes requested by the user.
    * In case the user registered 2 MRs, one for data and one for protection,
      the UMR consists of:
      - strided block format which includes data and protection MRs and
        their repetitive block format.
      - BSF with signature attributes requested by the user.

2. post SET_PSV in order to set the memory domain initial
   signature parameters passed by the user.
   SET_PSV is not signaled and solicited CQE.

3. post SET_PSV in order to set the wire domain initial
   signature parameters passed by the user.
   SET_PSV is not signaled and solicited CQE.

* After this compound WR we place a small fence for next WR to come.

This patch also introduces some helper functions to set the BSF correctly
and determining the signature format selectors.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07 11:39:51 -08:00
Sagi Grimberg
3bcdb17a5e IB/mlx5: Keep mlx5 MRs in a radix tree under device
This will be useful when processing signature errors on a specific
key.  The mlx5 driver will lookup the matching mlx5 memory region
structure and mark it as dirty (contains signature errors).

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07 11:26:49 -08:00
Sagi Grimberg
2ac45934f8 IB/mlx5: Remove MTT access mode from umr flags helper function
get_umr_flags helper function might be used for types of access modes
other than ACCESS_MODE_MTT, such as ACCESS_MODE_KLM.  So remove it from
helper, and callers will add their own access mode flag.

This commit does not add/change functionality.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07 11:26:49 -08:00
Sagi Grimberg
6e5eadace1 IB/mlx5: Break up wqe handling into begin & finish routines
As a preliminary step for signature feature which will require posting
multiple (3) WQEs for a single WR, we break post_send routine WQE
indexing into begin and finish routines.

This patch does not change any functionality.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07 11:26:49 -08:00
Sagi Grimberg
e1e66cc264 IB/mlx5: Initialize mlx5_ib_qp signature-related members
If user requested signature enable we initialize relevant mlx5_ib_qp
members.  We mark the qp as sig_enable and we increase the effective
SQ size, but still limit the user max_send_wr to original size
computed.  We also allow the create_qp routine to accept sig_enable
create flag.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07 11:26:49 -08:00
Sagi Grimberg
3121e3c441 mlx5: Implement create_mr and destroy_mr
Support create_mr and destroy_mr verbs.  Creating ib_mr may be done
for either ib_mr that will register regular page lists like
alloc_fast_reg_mr routine, or indirect ib_mrs that can register other
(pre-registered) ib_mrs in an indirect manner.

In addition user may request signature enable, that will mean that the
created ib_mr may be attached with signature attributes (BSF, PSVs).

Currently we only allow direct/indirect registration modes.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07 11:26:49 -08:00
Sagi Grimberg
1b01d33560 IB/core: Introduce signature verbs API
Introduce a verbs interface for signature-related operations.  A
signature handover operation configures the layouts of data and
protection attributes both in memory and wire domains.

Signature operations are:

- INSERT:
  Generate and insert protection information when handing over
  data from input space to output space.
- validate and STRIP:
  Validate protection information and remove it when handing over
  data from input space to output space.
- validate and PASS:
  Validate protection information and pass it when handing over
  data from input space to output space.

Once the signature handover opration is done, the HCA will offload
data integrity generation/validation while performing the actual data
transfer.

Additions:

1. HCA signature capabilities in device attributes
    Verbs provider supporting signature handover operations fills
    relevant fields in device attributes structure returned by
    ib_query_device.

2. QP creation flag IB_QP_CREATE_SIGNATURE_EN
    Creating a QP that will carry signature handover operations may
    require some special preparations from the verbs provider.  So we
    add QP creation flag IB_QP_CREATE_SIGNATURE_EN to declare that the
    created QP may carry out signature handover operations.  Expose
    signature support to verbs layer (no support for now).

3. New send work request IB_WR_REG_SIG_MR
    Signature handover work request. This WR will define the signature
    handover properties of the memory/wire domains as well as the
    domains layout. The purpose of this work request is to bind all
    the needed information for the signature operation:

    - data to be transferred:  wr->sg_list (ib_sge).
      * The raw data, pre-registered to a single MR (normally, before
        signature, this MR would have been used directly for the data
        transfer)
    - data protection guards: sig_handover.prot (ib_sge).
      * The data protection buffer, pre-registered to a single MR, which
        contains the data integrity guards of the raw data blocks.
        Note that it may not always exist, only in cases where the user is
        interested in storing protection guards in memory.
    - signature operation attributes: sig_handover.sig_attrs.
      * Tells the HCA how to validate/generate the protection information.

    Once the work request is executed, the memory region that will
    describe the signature transaction will be the sig_mr.  The
    application can now go ahead and send the sig_mr.rkey or use the
    sig_mr.lkey for data transfer.

4. New Verb ib_check_mr_status
    check_mr_status verb checks the status of the memory region post
    transaction.  The first check that may be used is
    IB_MR_CHECK_SIG_STATUS, which will indicate if any signature
    errors are pending for a specific signature-enabled ib_mr.  This
    verb is a lightwight check and is allowed to be taken from
    interrupt context.  An application must call this verb after it is
    known that the actual data transfer has finished.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07 11:26:49 -08:00
Sagi Grimberg
17cd3a2db8 IB/core: Introduce protected memory regions
This commit introduces verbs for creating/destoying memory
regions which will allow new types of memory key operations such
as protected memory registration.

Indirect memory registration is registering several (one
of more) pre-registered memory regions in a specific layout.
The Indirect region may potentialy describe several regions
and some repitition format between them.

Protected Memory registration is registering a memory region
with various data integrity attributes which will describe protection
schemes that will be handled by the HCA in an offloaded manner.
These memory regions will be applicable for a new REG_SIG_MR
work request introduced later in this patchset.

In the future these routines may replace or implement current memory
regions creation routines existing today:
- ib_reg_user_mr
- ib_alloc_fast_reg_mr
- ib_get_dma_mr
- ib_dereg_mr

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07 11:26:49 -08:00
Michele Baldessari
b28a613e91 libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8 (2BA30001)
Via commit 87809942d3 "libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk
for Seagate Momentus SpinPoint M8" we added a quirk for disks named
"ST1000LM024 HN-M101MBB" with firmware revision "2AR10001".

As reported on https://bugzilla.redhat.com/show_bug.cgi?id=1073901,
we need to also add firmware revision 2BA30001 as it is broken as well.

Reported-by: Nicholas <arealityfarbetween@googlemail.com>
Signed-off-by: Michele Baldessari <michele@acksyn.org>
Tested-by: Guilherme Amadio <guilherme.amadio@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2014-03-07 13:47:34 -05:00
Linus Torvalds
3bf7706b15 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
 "Mostly intel and radeon fixes, one tda998x, one kconfig dep fix and
  two more MAINTAINERS updates,

  All pretty run of the mill for this stage"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/atom: select the proper number of lanes in transmitter setup
  MAINTAINERS: add maintainer entry for TDA998x driver
  drm: fix bochs kconfig dependencies
  drm/radeon/dpm: fix typo in EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters
  drm/radeon/cik: fix typo in documentation
  drm/radeon: silence GCC warning on 32 bit
  drm/radeon: resume old pm late
  drm/radeon: TTM must be init with cpu-visible VRAM, v2
  DRM: armada: fix use of kfifo_put()
  drm/i915: Reject >165MHz modes w/ DVI monitors
  drm/i915: fix assert_cursor on BDW
  drm/i915: vlv: reserve GT power context early
  drm/i915: fix pch pci device enumeration
  drm/i915: Resolving the memory region conflict for Stolen area
  drm/i915: use backlight legacy combination mode also for i915gm/i945gm
  MAINTAINERS: update AGP tree to point at drm tree
2014-03-07 10:01:47 -08:00
Linus Torvalds
2a75184d52 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "Small collection of fixes for 3.14-rc. It contains:

   - Three minor update to blk-mq from Christoph.

   - Reduce number of unaligned (< 4kb) in-flight writes on mtip32xx to
     two.  From Micron.

   - Make the blk-mq CPU notify spinlock raw, since it can't be a
     sleeper spinlock on RT.  From Mike Galbraith.

   - Drop now bogus BUG_ON() for bio iteration with blk integrity.  From
     Nic Bellinger.

   - Properly propagate the SYNC flag on requests. From Shaohua"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: add REQ_SYNC early
  rt,blk,mq: Make blk_mq_cpu_notify_lock a raw spinlock
  bio-integrity: Drop bio_integrity_verify BUG_ON in post bip->bip_iter world
  blk-mq: support partial I/O completions
  blk-mq: merge blk_mq_insert_request and blk_mq_run_request
  blk-mq: remove blk_mq_alloc_rq
  mtip32xx: Reduce the number of unaligned writes to 2
2014-03-07 09:59:44 -08:00
Linus Torvalds
8ab47d3ec7 A set of pin control fixes for the v3.14 series:
- Fix chained interrupts, interrupt masking and register offset
   calculation for the sunxi driver.
 
 - Make MSM a bool rather than a tristate to stop build problems
   to happen - chained interrupt controllers cannot currently be
   defined in modules.
 
 - Fix a clock in the PFC driver.
 
 - Fix a kernel panic in the sirf driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTF97HAAoJEEEQszewGV1zdgQP/jFi8k5EDOFL7gYuCjeBrvqF
 HLk8vQF3HHizfjY2+hHh38FV0pQOE+tuJOmn/zbFb5ZQniQeXjMOT6uQFwKyZsXv
 8o6Ct0hPOc0LVId7NbwaL8oQ4tUd5KqFznOEhHzbQo8t9xsMBE5Q5Efo+9PRFCDW
 rdWshQy09nUgwXVi1BQBssk1y8Z2aMfiRFpzV0F6M4wI4oo8SPW2xsmmChn+e5wU
 EVeyNykfPdHQmc/yFR1GARhHH4ZqhGOkW2+j5Rp4UnhyfEsgeUI9tLknj7e6Ntp4
 AJUE/++dLYYR4fYx0VjcddvvW6QgMSNq98JnRJ5gRNnLAi/c5u3Ic4d00gUO+gOj
 HQiQiCqyqifzFkkGOfKaUl5D8RGRZHQg3R4NnXgQ2/UrSQfOBd9Q6HPdPj8w6kQ4
 13pyj2kqhmPydjTQLvCWzBp5EayLL3w06mfRdfxM4IluMjS2xv8NoYkKsmPEceFA
 MbpGD7ubDxBN0LkyESCg/ihNPbar56bYH4MPp/ycaghKmSXx1tcOl793yNnGHL5u
 N1JKQ7ZcOTV7dIvgyzmivtGv7Fet0Rb2aGdfCfweBG2uJcKZE++05s2B6I9ZBknx
 WvFnXkA/V/Q+lwXxubFNvst5C98SfZQq9BYwWXzD3Nv/9d/zfDmFDPxXFsGc/3MD
 Ist/2lEyd+ef6Nrf3rn4
 =gGJ6
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v3.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "This is a set of pin control fixes I have collected over the last few
  days.  Some have rotated more than others in linux-next, but they were
  rebased on v3.14-rc5 due to sloppy commit messages.  I am quite
  convinced that they are all good fixes that only hit this or that
  individual driver and not the entire subsystem.

   - Fix chained interrupts, interrupt masking and register offset
     calculation for the sunxi driver

   - Make MSM a bool rather than a tristate to stop build problems to
     happen - chained interrupt controllers cannot currently be defined
     in modules

   - Fix a clock in the PFC driver

   - Fix a kernel panic in the sirf driver"

* tag 'pinctrl-v3.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sirf: fix kernel panic in gpio_lock_as_irq
  pinctrl: sh-pfc: r8a7791: SD1_CLK fix
  pinctrl: msm: make PINCTRL_MSM bool instead of tristate
  pinctrl: sunxi: Fix interrupt register offset calculation
  pinctrl: sunxi: Fix masking when setting irq type
  pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility
2014-03-07 09:54:40 -08:00
Joe Thornber
cebc2de44d dm space map metadata: fix refcount decrement below 0 which caused corruption
This has been a relatively long-standing issue that wasn't nailed down
until Teng-Feng Yang's meticulous bug report to dm-devel on 3/7/2014,
see: http://www.redhat.com/archives/dm-devel/2014-March/msg00021.html

From that report:
  "When decreasing the reference count of a metadata block with its
  reference count equals 3, we will call dm_btree_remove() to remove
  this enrty from the B+tree which keeps the reference count info in
  metadata device.

  The B+tree will try to rebalance the entry of the child nodes in each
  node it traversed, and the rebalance process contains the following
  steps.

  (1) Finding the corresponding children in current node (shadow_current(s))
  (2) Shadow the children block (issue BOP_INC)
  (3) redistribute keys among children, and free children if necessary (issue BOP_DEC)

  Since the update of a metadata block's reference count could be
  recursive, we will stash these reference count update operations in
  smm->uncommitted and then process them in a FILO fashion.

  The problem is that step(3) could free the children which is created
  in step(2), so the BOP_DEC issued in step(3) will be carried out
  before the BOP_INC issued in step(2) since these BOPs will be
  processed in FILO fashion. Once the BOP_DEC from step(3) tries to
  decrease the reference count of newly shadow block, it will report
  failure for its reference equals 0 before decreasing. It looks like we
  can solve this issue by processing these BOPs in a FIFO fashion
  instead of FILO."

Commit 5b564d80 ("dm space map: disallow decrementing a reference count
below zero") changed the code to report an error for this temporary
refcount decrement below zero.  So what was previously a harmless
invalid refcount became a hard failure due to the new error path:

 device-mapper: space map common: unable to decrement a reference count below 0
 device-mapper: thin: 253:6: dm_thin_insert_block() failed: error = -22
 device-mapper: thin: 253:6: switching pool to read-only mode

This bug is in dm persistent-data code that is common to the DM thin and
cache targets.  So any users of those targets should apply this fix.

Fix this by applying recursive space map operations in FIFO order rather
than FILO.

Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=68801

Reported-by: Apollon Oikonomopoulos <apoikos@debian.org>
Reported-by: edwillam1007@gmail.com
Reported-by: Teng-Feng Yang <shinrairis@gmail.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.13+
2014-03-07 12:02:47 -05:00
Tejun Heo
70044d71d3 firewire: don't use PREPARE_DELAYED_WORK
PREPARE_[DELAYED_]WORK() are being phased out.  They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.

firewire core-device and sbp2 have been been multiplexing work items
with multiple work functions.  Introduce fw_device_workfn() and
sbp2_lu_workfn() which invoke fw_device->workfn and
sbp2_logical_unit->workfn respectively and always use the two
functions as the work functions and update the users to set the
->workfn fields instead of overriding work functions using
PREPARE_DELAYED_WORK().

This fixes a variety of possible regressions since a2c1c57be8
"workqueue: consider work function when searching for busy work items"
due to which fw_workqueue lost its required non-reentrancy property.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: linux1394-devel@lists.sourceforge.net
Cc: stable@vger.kernel.org # v3.9+
Cc: stable@vger.kernel.org # v3.8.2+
Cc: stable@vger.kernel.org # v3.4.60+
Cc: stable@vger.kernel.org # v3.2.40+
2014-03-07 10:19:57 -05:00
Sagi Grimberg
16c0ae0289 Target/sbc: Fix sbc_copy_prot for offset scatters
When copying between device and command protection scatters
we must take into account that device scatters might be offset
and we might copy outside scatter range. Thus for each cmd prot
scatter we must take the min between cmd prot scatter, dev prot
scatter, and whats left (and loop in case we havn't copied enough
from/to cmd prot scatter).

Example (single t_prot_sg of len 2048):
kernel: sbc_dif_copy_prot: se_cmd=ffff880380aaf970, left=2048, len=2048, dev_prot_sg_offset=3072, dev_prot_sg_len=4096
kernel: isert: se_cmd=ffff880380aaf970 PI error found type 0 at sector 0x2600 expected 0x0 vs actual 0x725f, lba=2580

Instead of copying 2048 from offset 3072 (copying junk outside sg
limit 4096), we must to copy 1024 and continue to next sg until
we complete cmd prot scatter.

This issue was found using iSER T10-PI offload over rd_mcp (wasn't
discovered with fileio since file_dev prot sglists are never offset).

Changes from v1:
- Fix sbc_copy_prot copy length miss-calculation

Changes from v0:
- Removed psg->offset consideration for psg_len computation
- Removed sg->offset consideration for offset condition
- Added copied consideraiton for len computation
- Added copied offset to paddr when doing memcpy

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-06 20:52:11 -08:00
Mark Brown
d930acfdb0 Merge remote-tracking branches 'spi/fix/ath79', 'spi/fix/atmel', 'spi/fix/coldfire', 'spi/fix/fsl-dspi', 'spi/fix/imx' and 'spi/fix/topcliff-pch' into spi-linus 2014-03-07 11:08:13 +08:00
Dave Airlie
45db98e542 Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
one more radeon fix.

* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon/atom: select the proper number of lanes in transmitter setup
2014-03-07 09:27:22 +10:00
Alex Deucher
d03874c881 drm/radeon/atom: select the proper number of lanes in transmitter setup
We need to check for DVI vs. HDMI when setting up duallink since
HDMI is single link only.  Fixes 4k modes on newer asics.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=75223

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2014-03-06 18:09:52 -05:00
Gerd Hoffmann
77ac9a05d4 drm: fix bochs kconfig dependencies
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-07 09:05:10 +10:00
Dave Airlie
ae693400bd Merge branch 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox into drm-fixes
fix for kfifo api change.
* 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox:
  DRM: armada: fix use of kfifo_put()
2014-03-07 09:04:32 +10:00
Alex Deucher
13714323f8 drm/radeon/dpm: fix typo in EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters
Should be at 0x8 rather than 0.

fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=60523

Noticed by ArtForz on #radeon

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2014-03-06 16:46:58 -05:00
Alex Deucher
972c5ddb17 drm/radeon/cik: fix typo in documentation
Copy-paste typo.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-03-06 16:46:57 -05:00
Paul Bolle
0d997b6857 drm/radeon: silence GCC warning on 32 bit
Building radeon_ttm.o on 32 bit x86 triggers a warning:
    In file included from include/asm-generic/bug.h:13:0,
                     from [...]/arch/x86/include/asm/bug.h:38,
                     from include/linux/bug.h:4,
                     from include/drm/drm_mm.h:39,
                     from include/drm/drm_vma_manager.h:26,
                     from include/drm/ttm/ttm_bo_api.h:35,
                     from drivers/gpu/drm/radeon/radeon_ttm.c:32:
    drivers/gpu/drm/radeon/radeon_ttm.c: In function 'radeon_ttm_gtt_read':
    include/linux/kernel.h:712:17: warning: comparison of distinct pointer types lacks a cast [enabled by default]
      (void) (&_min1 == &_min2);  \
                     ^
    drivers/gpu/drm/radeon/radeon_ttm.c:938:22: note: in expansion of macro 'min'
       ssize_t cur_size = min(size, PAGE_SIZE - off);
                          ^

Silence this warning by using min_t(). Since cur_size will never be
negative and its upper bound is PAGE_SIZE, we can change its type to
size_t and use min_t(size_t, [...]) here.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2014-03-06 16:46:56 -05:00