Commit graph

167,895 commits

Author SHA1 Message Date
Kevin McKinney
b5ec04ed75 Staging: bcm: Replace UINT with unsigned int in nvm.h
This patch replaces "UINT" with "unsigned
int" in nvm.h.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07 10:45:50 -08:00
Kevin McKinney
6f98775fe9 Staging: bcm: Replace B_UINT32 with u32 in nvm.h
This patch replace "B_UINT32" with "u32" in
nvm.h

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07 10:45:49 -08:00
Kevin McKinney
e5b2445e46 Staging: bcm: Enclose complex values in parenthesis in nvm.h
This patch fixes the warning: "Macros with complex values
should be enclosed in parenthesis" as reported by
checkpatch.pl

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07 10:45:49 -08:00
Kevin McKinney
72a57c08b5 Staging: bcm: Properly format braces in nvm.h
This patch properly formats braces in nvm.h as
reported by checkpath.pl

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07 10:45:49 -08:00
Kevin McKinney
04ac0434c1 Staging: bcm: Properly format and remove comments as needed in nvm.h
This patch formats all comments and removes
them as needed.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07 10:45:49 -08:00
Kevin McKinney
0a42577ddf Staging: bcm: Fix all white space issues in nvm.h
This patch fixes all white space issues in
nvm.h as reported by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07 10:45:49 -08:00
Greg Kroah-Hartman
ecc3599396 First round of IIO new stuff and cleanups for 3.9
Here we have:
 * RTC driver for the hid-sensor hubs.  This is routed through here with
   agreement of Jiri Kosina and Andrew Morton.
 * Some small patches doing dead code removal and fixing some comments.
 * max1363 - move to the triggered_buffer helpers (basically duplicate code
   removal).
 * lp8788 - parent device change from the i2c device to the intermediate mfd.
 
 So the bulk of what we have is actually outside the IIO tree but the RTC
 driver in question is dependent on some patches that directly effect IIO so
 I am routing it through IIO with the agreement of the relevant maintainers
 (Andrew is acting as maintainer of RTC at the moment).  The majority of
 HID-sensor related code is in IIO and it now crosses 3 subsystems so it
 was going to be a bit awkward whatever route it took.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ6adzAAoJEFSFNJnE9BaIdXUP/3evWP7pfIME87JWjG7/jE4G
 OD1Wv5S0Iq7qJUYrd1GD4jeGleXQbsWfb956mXG3CyVMWzZhn5Yfn6rLYCBwET+7
 NYDh/4e5qLzcdENtqMrXYlb+PNMnv07lCsOhxTHEm8EaqkaQBd+AYZTm8qWaADt8
 Cd26ItGPLAgWlyaskF1dfu0sZAR2C7s4dBqqGdD7Yt/pk8jF7AllCcPKgZ48vhBI
 oVP2Gmxs5Tt2CtmOhJMrtx+u5SqMyOyIgf6BFxVSjTBBDyD3uBBZ/VqlKVkBOCE6
 DeCoBjkEuu0nnI6akygcQLHPa3MbLYum42WaSLX12VG4ZMcxYwRoimzSPwDDeSyP
 oJd8V9RhvlqOHbvKo2aF6gDYRkVd2RXo32B8xrpB8WvAuI/EEYn/1BpeV8WkPph3
 hngFV20r7pevm5mtjdRK+1tx8Vp8NjpWp0Y/dwfsbr6F4LJMa2cKfpKQWHoD51ZK
 LNy4lRLTEP0iJWpUE752Zt0FBFpTJO65nsHQ6QkWELRBxJ0WjM9yy3ArWxBz1EPv
 gzbWJpT4B3XnKn5qx0TZ0tCPqTAeqVlHAUwp4VxhQMaa+qxWKDjvhKO58GaEifep
 9yv7sVhUo4sULNIMW0dT6stu/dAA5ygGu1Y387t+ZTQEv8gdGNljAua7bVNbQYxJ
 qqTTsjwx/rX+8NxQbPJh
 =vBZ+
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.9a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan says:

	First round of IIO new stuff and cleanups for 3.9

	Here we have:
	* RTC driver for the hid-sensor hubs.  This is routed through here with
	  agreement of Jiri Kosina and Andrew Morton.
	* Some small patches doing dead code removal and fixing some comments.
	* max1363 - move to the triggered_buffer helpers (basically duplicate code
	  removal).
	* lp8788 - parent device change from the i2c device to the intermediate mfd.

	So the bulk of what we have is actually outside the IIO tree but the RTC
	driver in question is dependent on some patches that directly effect IIO so
	I am routing it through IIO with the agreement of the relevant maintainers
	(Andrew is acting as maintainer of RTC at the moment).  The majority of
	HID-sensor related code is in IIO and it now crosses 3 subsystems so it
	was going to be a bit awkward whatever route it took.
2013-01-07 09:53:39 -08:00
Alexander Holler
e07c6d170c hid: iio: rename struct hid_sensor_iio_common to hid_sensor_common
The structure with common attributes for hid-sensors isn't specific
to the iio-subsystem, so rename it to hid_sensor_common.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-06 11:48:11 +00:00
Alexander Holler
62e00cb9a3 rtc: add rtc-driver for HID sensors of type time
This driver makes the time from HID sensors (hubs) which are offering
such available like any other RTC does.

It is necessary that all values like year, month etc, are send as
8bit values (1 byte each) and all of them in 1 report. Also the
spec HUTRR39b doesn't define the range of the year field, we
tread it as 0 - 99 because that's what most RTCs I know about are
offering.

Currently the time can only be read. Setting the time must be done
through sending a report (or a feature). The spec currently doesn't
define how and I'm not sure if I just should define something by myself.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-06 11:46:10 +00:00
Alexander Holler
2974cdf293 iio: merge hid-sensor-attributes.h into hid-sensor-hub.h
The stuff in hid-sensor-attributes.h is needed by every piece which
uses hid-sensor-hub and merging it into hid-sensor-hub.h makes it accessible
from outside the iio subdirectory.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-06 11:43:37 +00:00
Kim, Milo
5306f416ad iio: lp8788_adc: fix parent device in kernel message
Use 'dev' of iio device in a kernel message rather than i2c client device node.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-06 11:35:31 +00:00
Kim, Milo
dc11699908 iio: lp8788_adc: fix a parent device in _probe()
The lp8788-adc is a platform driver of lp8788-mfd.
 The platform device is allocated when mfd_add_devices() is called
 in lp8788-mfd.
 On the other hand, 'lp->dev' is the i2c client device.

 Therefore, this 'platform_device' is a proper parent device of
 iio device and device kernel message.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-06 11:35:30 +00:00
Linus Torvalds
d50403dcc5 Merge branch 'fixes-for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED fix from Bryan Wu.

* 'fixes-for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: leds-gpio: set devm_gpio_request_one() flags param correctly
2013-01-02 18:12:35 -08:00
Javier Martinez Canillas
2d7c22f67d leds: leds-gpio: set devm_gpio_request_one() flags param correctly
commit a99d76f leds: leds-gpio: use gpio_request_one

changed the leds-gpio driver to use gpio_request_one() instead
of gpio_request() + gpio_direction_output()

Unfortunately, it also made a semantic change that breaks the
leds-gpio driver.

The gpio_request_one() flags parameter was set to:

GPIOF_DIR_OUT | (led_dat->active_low ^ state)

Since GPIOF_DIR_OUT is 0, the final flags value will just be the
XOR'ed value of led_dat->active_low and state.

This value were used to distinguish between HIGH/LOW output initial
level and call gpio_direction_output() accordingly.

With this new semantic gpio_request_one() will take the flags value
of 1 as a configuration of input direction (GPIOF_DIR_IN) and will
call gpio_direction_input() instead of gpio_direction_output().

int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
{
..
	if (flags & GPIOF_DIR_IN)
		err = gpio_direction_input(gpio);
	else
		err = gpio_direction_output(gpio,
				(flags & GPIOF_INIT_HIGH) ? 1 : 0);
..
}

The right semantic is to evaluate led_dat->active_low ^ state and
set the output initial level explicitly.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reported-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-01-02 17:58:41 -08:00
Linus Torvalds
ef05e9b960 Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
 "This fixes some small errors in the new da9055 driver, eliminates a
  compiler warning and adds DT support for the twl4030_wdt driver (so
  that we can have multiple watchdogs with DT on the omap platforms)."

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: twl4030_wdt: add DT support
  watchdog: omap_wdt: eliminate unused variable and a compiler warning
  watchdog: da9055: Don't update wdt_dev->timeout in da9055_wdt_set_timeout error path
  watchdog: da9055: Fix invalid free of devm_ allocated data
2013-01-02 17:46:14 -08:00
Linus Torvalds
080a62e2ce PCI updates for v3.8:
PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz
   PCI: Remove spurious error for sriov_numvfs store and simplify flow
   PCI: Add PCIe Link Capability link speed and width names
   PCI/PM: Do not suspend port if any subordinate device needs PME polling
   PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ5HnVAAoJEPGMOI97Hn6zprgP/1we4RhVaXLRnmLyc9OpS97Z
 9KZUU/rsMQ/RYstdNFV30JOypMFL1BlK7jpLR14gjSgCulKK9etvjBTwiV26Rfor
 n/LWru4CWUtGUH/2c4IwuN0FKxfU7W4GxuVfKi3uACh7yJRwKgxZhFKLLb4OZ/T0
 A1CiIktdpZhH5A8+WdoSkZSsfQPuUA6UVKQleEQh/qJl9qgxwEDLsdj5fIZLsFUB
 Fo3bbusq2X+pHU0uuBIzrheSUeSmxXzeZcte8JxTEEwB/Gdsn24lJ39MK5PHAaOE
 gSVC7HDi+vNCICZhi7H93musPczL1TqeyMZQWSa/rj7KV836kG+Phz61SmsXTxyR
 VpfnEZOx7GreErpBuLKrOVslXJl1TBc/ZiiLd5SBUlO4ZClAssPcevtUexCR3xr6
 eHoSYMtwblW/vgJ3rn/PD8SgksZVJsd6+JAlVbC53XAdeJuEheCdEU7HnQZ3ZQRF
 6wpWOBfIxdSQM4AukncNjUSTQpVjNFoEXNcPBCamazDz9NgRIcrnBAd/94+AVD0t
 WQpoU0HDP6h00pK8Ls3Fsv23qbfPDPP9i6zhSGlv5Q9Sz5T8b178j8h7tkUgtPy/
 vxAtwUgFwz5cxE053lrht0JEQUikv99VcUJKrQc17g6GIMenh4duXrxF1I1EERXD
 fcVZNas3SrnLSKfsVwws
 =Ehs+
 -----END PGP SIGNATURE-----

Merge tag '3.8-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Some fixes for v3.8.  They include a fix for the new SR-IOV sysfs
  management support, an expanded quirk for Ricoh SD card readers, a
  Stratus DMI quirk fix, and a PME polling fix."

* tag '3.8-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz
  PCI/PM: Do not suspend port if any subordinate device needs PME polling
  PCI: Add PCIe Link Capability link speed and width names
  PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)
  PCI: Remove spurious error for sriov_numvfs store and simplify flow
2013-01-02 17:44:29 -08:00
Aaro Koskinen
8899b8d93e watchdog: twl4030_wdt: add DT support
Add DT support for twl4030_wdt. This is needed to get twl4030_wdt to
probe when booting with DT.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02 12:07:05 +01:00
Aaro Koskinen
412b3729dd watchdog: omap_wdt: eliminate unused variable and a compiler warning
We forgot to delete this in the commit 4f4753d9 (watchdog: omap_wdt:
convert to devm_ functions), and as a result the following compilation
warning was introduced:

drivers/watchdog/omap_wdt.c: In function 'omap_wdt_remove':
drivers/watchdog/omap_wdt.c:299:19: warning: unused variable 'res' [-Wunused-variable]

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02 12:06:58 +01:00
Axel Lin
98e4a29389 watchdog: da9055: Don't update wdt_dev->timeout in da9055_wdt_set_timeout error path
Otherwise, WDIOC_GETTIMEOUT returns wrong value if set_timeout fails.
This patch also removes unnecessary ret variable in da9055_wdt_ping function.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02 12:06:49 +01:00
Axel Lin
ee8c94adff watchdog: da9055: Fix invalid free of devm_ allocated data
It is not required to free devm_ allocated data. Since kref_put
needs a valid release function, da9055_wdt_release_resources()
is not deleted.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02 12:06:43 +01:00
Peter Meerwald
71d2c120fd iio: max1363 comment and whitespace fixes
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-01 17:38:31 +00:00
Peter Meerwald
4389fbec5b iio: cleanup buffer setup code in max1363 driver
use iio_triggered_buffer_setup(), iio_triggered_buffer_cleanup()

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-01 17:38:30 +00:00
Linus Torvalds
4a490b78cb Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull DRM update from Dave Airlie:
 "This is a bit larger due to me not bothering to do anything since
  before Xmas, and other people working too hard after I had clearly
  given up.

  It's got the 3 main x86 driver fixes pulls, and a bunch of tegra
  fixes, doesn't fix the Ironlake bug yet, but that does seem to be
  getting closer.

   - radeon: gpu reset fixes and userspace packet support
   - i915: watermark fixes, workarounds, i830/845 fix,
   - nouveau: nvd9/kepler microcode fixes, accel is now enabled and
     working, gk106 support
   - tegra: misc fixes."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (34 commits)
  Revert "drm: tegra: protect DC register access with mutex"
  drm: tegra: program only one window during modeset
  drm: tegra: clean out old gem prototypes
  drm: tegra: remove redundant tegra2_tmds_config entry
  drm: tegra: protect DC register access with mutex
  drm: tegra: don't leave clients host1x member uninitialized
  drm: tegra: fix front_porch <-> back_porch mixup
  drm/nve0/graph: fix fuc, and enable acceleration on all known chipsets
  drm/nvc0/graph: fix fuc, and enable acceleration on GF119
  drm/nouveau/bios: cache ramcfg strap on later chipsets
  drm/nouveau/mxm: silence output if no bios data
  drm/nouveau/bios: parse/display extra version component
  drm/nouveau/bios: implement opcode 0xa9
  drm/nouveau/bios: update gpio parsing apis to match current design
  drm/nouveau: initial support for GK106
  drm/radeon: add WAIT_UNTIL to evergreen VM safe reg list
  drm/i915: disable shrinker lock stealing for create_mmap_offset
  drm/i915: optionally disable shrinker lock stealing
  drm/i915: fix flags in dma buf exporting
  drm/radeon: add support for MEM_WRITE packet
  ...
2012-12-30 10:00:37 -08:00
Linus Torvalds
8d91a42e54 ARM: arm-soc: late cleanups for omap
From Tony Lindgren:
 Here are few more patches to finish the omap changes for
 multiplatform conversion that are not strictly fixes, but
 were too complex to do with the dependencies during the
 merge window. Those are to move of serial-omap.h to
 platform_data, and the removal of remaining cpu_is_omap
 macro usage outside mach-omap2.
 
 Then there are several trivial fixes for typos and few
 minimal omap2plus_defconfig updates.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ3es9AAoJEIwa5zzehBx3bpwP/j4k4mGm4RMLTY9e8KNNxrDW
 FAeU52h91qDONn3EXcF7oSd5IqbDoQRCQx9vn4XBfSm23uOzvP3hOSDe8iIz9t8C
 XdLSXJfJDuYKuEBYxFNOVBdBziZoE7Gtp1JP9s79qfGfQurUfnRQ9gg6zoMMoxMg
 KdVnzFbaCeN/Dgbyq/WToDdOCUv2jeiSNI0gf6oe3Tju0uVjBSmlZUnkbAsRMvOW
 RL2uwp66yS6uLc/w5cfPI/wcp1jRZDYm2E7JB+TmHWqCYx2qpDE5EuDuW5+cY/DR
 RTBr1c0fSl3k3o3iNOEijkFwGShivf1PksesMA+Fx9BrFwtrhtYT/dVZbuS3AjVL
 1vIn3c+8rp3p63EsS1WxAMBvBq3qgqAl2shgow1B3QlXdErB9HNRErFKjU9rJ1ES
 fZgtWkzLtCqFaN/WnQAj0nfooPmrmhaDrbHJd7Bt7g8dfgGBHl9nkmQ4tMAa/z4x
 f/mZ0MxtXwhSUYBDvJ9vvtcNdeo9WmVV5zCfHUiMB7LB4wjxJUf7xMT9AquQUGqj
 H5EkaSyRjWG35293WDmxAOKlAkMP+AH5cuROKNNwNN5+i7ypJC+jrMDcgwfwQoXl
 i0yJeJhzFg9WV9buNB7+uWTA9vz7uveHSeaVXbbTVbuZ+apTgWl+MTsua0C2hhbU
 81k7fmqW2fCWkiw5eUeZ
 =RE6Z
 -----END PGP SIGNATURE-----

Merge tag 'omap-late-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull late ARM cleanups for omap from Olof Johansson:
 "From Tony Lindgren:

  Here are few more patches to finish the omap changes for multiplatform
  conversion that are not strictly fixes, but were too complex to do
  with the dependencies during the merge window.  Those are to move of
  serial-omap.h to platform_data, and the removal of remaining
  cpu_is_omap macro usage outside mach-omap2.

  Then there are several trivial fixes for typos and few minimal
  omap2plus_defconfig updates."

* tag 'omap-late-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arch/arm/mach-omap2/dpll3xxx.c: drop if around WARN_ON
  OMAP2: Fix a typo - replace regist with register.
  ARM/omap: use module_platform_driver macro
  ARM: OMAP2+: PMU: Remove unused header
  ARM: OMAP4: remove duplicated include from omap_hwmod_44xx_data.c
  ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio
  ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support
  ARM: OMAP2+: enable devtmpfs and devtmpfs automount
  ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER
  ARM: OMAP2+: Drop plat/cpu.h for omap2plus
  ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usage
  MAINTAINERS: Add an entry for omap related .dts files
2012-12-30 09:59:21 -08:00
Dave Airlie
d5757dbe79 Revert "drm: tegra: protect DC register access with mutex"
This reverts commit 83c0bcb694.

Lucas pointed out this was a mistake, and I missed the discussion,
so just revert it out to save a rebase.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30 21:58:20 +10:00
Lucas Stach
500df2e5d8 drm: tegra: program only one window during modeset
The intention is to program exactly WIN_A, not WIN_A and possibly
others.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30 14:01:35 +10:00
Lucas Stach
e39250aa52 drm: tegra: clean out old gem prototypes
There is no gem.c anymore, those functions are implemented by the
drm_cma_helpers now.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30 14:01:34 +10:00
Lucas Stach
fa416ddc0a drm: tegra: remove redundant tegra2_tmds_config entry
The 720p and 1080p entries are completely redundant, as we are matching
the table entries against <=pclk.
Also generalize the comment, as we are using those table entries even
when driving other modes than the standard TV ones.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30 14:01:33 +10:00
Lucas Stach
83c0bcb694 drm: tegra: protect DC register access with mutex
Window properties are programmed through a shared aperture and have to
happen atomically. Also we do the read-update-write dance on some of the
shared regs.
To make sure that different functions don't stumble over each other
protect the register access with a mutex.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30 14:01:33 +10:00
Lucas Stach
4026bfb39a drm: tegra: don't leave clients host1x member uninitialized
No real problem for now, as nothing is using this, but leaving it
unitialized is asking for trouble later on.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30 14:01:32 +10:00
Lucas Stach
4049508988 drm: tegra: fix front_porch <-> back_porch mixup
Fixes wrong picture offset observed when using HDMI output with a
Technisat HD TV.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Mark Zhang <markz@nvidia.com>
Tested-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30 14:01:31 +10:00
Dave Airlie
8be0e5c427 Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Some fixes for 3.8:
- Watermark fixups from Chris Wilson (4 pieces).
- 2 snb workarounds, seem to be recently added to our internal DB.
- workaround for the infamous i830/i845 hang, seems now finally solid!
  Based on Chris' fix for SNA, now also for UXA/mesa&old SNA.
- Some more fixlets for shrinker-pulls-the-rug issues (Chris&me).
- Fix dma-buf flags when exporting (you).
- Disable the VGA plane if it's enabled on lid open - similar fix in
  spirit to the one I've sent you last weeek, BIOS' really like to mess
  with the display when closing the lid (awesome debug work from Krzysztof
  Mazur).

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: disable shrinker lock stealing for create_mmap_offset
  drm/i915: optionally disable shrinker lock stealing
  drm/i915: fix flags in dma buf exporting
  i915: ensure that VGA plane is disabled
  drm/i915: Preallocate the drm_mm_node prior to manipulating the GTT drm_mm manager
  drm: Export routines for inserting preallocated nodes into the mm manager
  drm/i915: don't disable disconnected outputs
  drm/i915: Implement workaround for broken CS tlb on i830/845
  drm/i915: Implement WaSetupGtModeTdRowDispatch
  drm/i915: Implement WaDisableHiZPlanesWhenMSAAEnabled
  drm/i915: Prefer CRTC 'active' rather than 'enabled' during WM computations
  drm/i915: Clear self-refresh watermarks when disabled
  drm/i915: Double the cursor self-refresh latency on Valleyview
  drm/i915: Fixup cursor latency used for IVB lp3 watermarks
2012-12-30 13:54:12 +10:00
Dave Airlie
b1d778b970 Merge branch 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux into drm-next
Misc fixes for reset and new packets for userspace usage.

* 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: add WAIT_UNTIL to evergreen VM safe reg list
  drm/radeon: add support for MEM_WRITE packet
  drm/radeon: restore modeset late in GPU reset path
  drm/radeon: avoid deadlock in pm path when waiting for fence
  drm/radeon: don't leave fence blocked process on failed GPU reset
2012-12-30 13:02:48 +10:00
Linus Torvalds
101e5c7470 Report i2c errors to userspace in lm73 driver
Fix problem with DIV_ROUND_CLOSEST and unsigned divisors in emc6w201 driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ11BwAAoJEMsfJm/On5mBQrEP/0mnrSDdrtIRL04x1g3zvcmW
 Bd6Eq2utwll2+3KisModNm1Jetshw1wXOW5CE/IhpsJoxDfd1PE0+jKF8pY/IBVS
 pBVOk9K2er+i4tRNEjMjpe/w+nxKGISfrkF9hKFpGE0kfiM4mz6yoj1EwIX7OHZf
 wBeJC7upvRS+MYzT0tffBTkRFR2yEV4bUH2tur/xDrFnWljNA2SGc62QAQXAIhYh
 fmV6T8Zxbms7L+Q0g3b9UMMIFiAf/5IvF6DPnXuJqoPRYdyD7x0UMr6JiuagLWwH
 0IQoLRzTewvGhwCmpZTWKFMhwjXhwxdB31PtBWg+xScPDL8ty98Fb0IsYSUORjTh
 dy+GFTmQKAmMnnq6+Jl4WebNZwf8NrjiDAe+kV05FeGHacEgAYR/e+KRzfB0yCRv
 8hWAm2wXCOZVlaqJozTenmoUsLft+QXEZ1GZu+r9xNPIDXBy90j4toOkfh98FUoO
 1W+FbMMhYM1Hx+gpwneEIl0gtHityzcgnxgZVGXkoGAuevnQXvIbtbPtpPeJG9XD
 I6JOhBpvYdB6Ka198vAwQNpPAs7omlKCWJ7ZiAFlOjAu8W1fQjbZ+NtBtEtCEBHA
 KT1f/jgS8V6vRZg0Dors3u7Cc58eyHrnmpYlsJlSDyNQmYtvuBx3NAGQGKvwZhQ1
 R0Vi3N9eZwjrlw+bkKih
 =2sDG
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Report i2c errors to userspace in lm73 driver

 - Fix problem with DIV_ROUND_CLOSEST and unsigned divisors in emc6w201
   driver

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (emc6w201) Fix DIV_ROUND_CLOSEST problem with unsigned divisors
  hwmon: (lm73} Detect and report i2c bus errors
2012-12-27 10:46:47 -08:00
Linus Torvalds
7fd83b47ce Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

1) GRE tunnel drivers don't set the transport header properly, they also
   blindly deref the inner protocol ipv4 and needs some checks.  Fixes
   from Isaku Yamahata.

2) Fix sleeps while atomic in netdevice rename code, from Eric Dumazet.

3) Fix double-spinlock in solos-pci driver, from Dan Carpenter.

4) More ARP bug fixes.  Fix lockdep splat in arp_solicit() and then the
   bug accidentally added by that fix.  From Eric Dumazet and Cong Wang.

5) Remove some __dev* annotations that slipped back in, as well as all
   HOTPLUG references.  From Greg KH

6) RDS protocol uses wrong interfaces to access scatter-gather elements,
   causing a regression.  From Mike Marciniszyn.

7) Fix build error in cpts driver, from Richard Cochran.

8) Fix arithmetic in packet scheduler, from Stefan Hasko.

9) Similarly, fix association during calculation of random backoff in
   batman-adv.  From Akinobu Mita.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits)
  ipv6/ip6_gre: set transport header correctly
  ipv4/ip_gre: set transport header correctly to gre header
  IB/rds: suppress incompatible protocol when version is known
  IB/rds: Correct ib_api use with gs_dma_address/sg_dma_len
  net/vxlan: Use the underlying device index when joining/leaving multicast groups
  tcp: should drop incoming frames without ACK flag set
  netprio_cgroup: define sk_cgrp_prioidx only if NETPRIO_CGROUP is enabled
  cpts: fix a run time warn_on.
  cpts: fix build error by removing useless code.
  batman-adv: fix random jitter calculation
  arp: fix a regression in arp_solicit()
  net: sched: integer overflow fix
  CONFIG_HOTPLUG removal from networking core
  Drivers: network: more __dev* removal
  bridge: call br_netpoll_disable in br_add_if
  ipv4: arp: fix a lockdep splat in arp_solicit()
  tuntap: dont use a private kmem_cache
  net: devnet_rename_seq should be a seqcount
  ip_gre: fix possible use after free
  ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally
  ...
2012-12-27 10:40:30 -08:00
Marek Vasut
99e02018df iio: mxs: Remove unused struct mxs_lradc_chan
This structure definition seems to be some kind of remnant from
previous development that accidentally made it mainline. Remove
it as it's unused.

Remove unused "enable" field from struct mxs_lradc as well. This
seems to be remnant of early development too.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-12-27 11:24:27 +00:00
Alexander Stein
569c4ac218 iio: Fix some comments
Signed-off-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-12-27 11:21:28 +00:00
Yan Burman
af9b078e35 net/vxlan: Use the underlying device index when joining/leaving multicast groups
The socket calls from vxlan to join/leave multicast group aren't
using the index of the underlying device, as a result the stack uses
the first interface that is up. This results in vxlan being non functional
over a device which isn't the 1st to be up.
Fix this by providing the iflink field to the vxlan instance
to the multicast calls.

Signed-off-by: Yan Burman <yanb@mellanox.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-26 15:09:55 -08:00
Richard Cochran
ccb6e984a1 cpts: fix a run time warn_on.
This patch fixes a warning in clk_enable by calling clk_prepare_enable
instead.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-26 14:15:09 -08:00
Richard Cochran
cbc44dbe1f cpts: fix build error by removing useless code.
The cpts driver tries to obtain the input clock frequency by calling the
clock's internal 'recalc' method. Since <plat/clock.h> has been removed,
this code can no longer compile.

However, the driver never makes use of the frequency value, so this patch
fixes the issue by removing the offending code altogether.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-26 14:15:09 -08:00
Andy Lutomirski
812089e01b PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz
Otherwise it fails like this on cards like the Transcend 16GB SDHC card:

    mmc0: new SDHC card at address b368
    mmcblk0: mmc0:b368 SDC   15.0 GiB
    mmcblk0: error -110 sending status command, retrying
    mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0

Tested on my Lenovo x200 laptop.

[bhelgaas: changelog]
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Chris Ball <cjb@laptop.org>
CC: Manoj Iyer <manoj.iyer@canonical.com>
CC: stable@vger.kernel.org
2012-12-26 10:43:06 -07:00
Huang Ying
c733b77475 PCI/PM: Do not suspend port if any subordinate device needs PME polling
Ulrich reported that his USB3 cardreader does not work reliably when
connected to the USB3 port.  It turns out that USB3 controller failed to
awaken when plugging in the USB3 cardreader.  Further experiments found
that the USB3 host controller can only be awakened via polling, not via PME
interrupt.  But if the PCIe port to which the USB3 host controller is
connected is suspended, we cannot poll the controller because its config
space is not accessible when the PCIe port is in a low power state.

To solve the issue, the PCIe port will not be suspended if any subordinate
device needs PME polling.

[bhelgaas: use bool consistently rather than mixing int/bool]
Reference: http://lkml.kernel.org/r/50841CCC.9030809@uli-eckhardt.de
Reported-by: Ulrich Eckhardt <usb@uli-eckhardt.de>
Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: stable@vger.kernel.org	# v3.6+
2012-12-26 10:39:23 -07:00
Bjorn Helgaas
faa48a507f PCI: Remove spurious error for sriov_numvfs store and simplify flow
If we request "num_vfs" and the driver's sriov_configure() method enables
exactly that number ("num_vfs_enabled"), we complain "Invalid value for
number of VFs to enable" and return an error.  We should silently return
success instead.

Also, use kstrtou16() since numVFs is defined to be a 16-bit field and
rework to simplify control flow.

Reported-by: Greg Rose <gregory.v.rose@intel.com>
Reference: http://lkml.kernel.org/r/20121214101911.00002f59@unknown
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
2012-12-26 10:39:22 -07:00
Linus Torvalds
637704cbc9 Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux
Pull i2c __dev* attribute removal from Wolfram Sang:
 "The squashed patches from Bill to get rid of the __dev* annotations in
  the i2c subsystem.  I couldn't include it in my previous pull request
  due to some dependency with the mfd subsystem.  I had this patch in
  linux-next for two days before rc1 and nothing popped up."

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux:
  i2c: remove __dev* attributes from subsystem
2012-12-23 09:48:33 -08:00
Rafael J. Wysocki
9c016d6109 Partly revert "[media] uvcvideo: Set error_idx properly for extended controls API failures"
Commit f0ed2ce840 ("[media] uvcvideo: Set error_idx properly for
extended controls API failures") causes user space to behave incorrectly
on one of my test machines (there is no sound under KDE 4.9.4 using
pulseaudio and there is a knotify4 process occupying one of the CPU
cores 100% of the time).  Reverting that commit entirely fixes the
problem for me.

However, commit f0ed2ce840 appears to do more than it follows from its
changelog, because the changelog only says about the changes related to
ctrls->error_idx, while the commit additionally changes error codes
returned by various functions in uvc_ctrl.c and uvc_v4l2.c.  It turns
out that the changes of the returned error codes confuse the user spce,
so it is sufficient to revert the part of commit f0ed2ce840 not
mentioned in its changelog to fix the problem.

[ 'ENOENT' is not a valid error return from an ioctl to begin with, and
  I don't understand how anybody ever even thought it would be.  - Linus ]

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-23 09:39:14 -08:00
Ben Skeggs
eca15296a9 drm/nve0/graph: fix fuc, and enable acceleration on all known chipsets
Also adds GK106 to chipsets known by ucode.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23 22:59:32 +10:00
Ben Skeggs
902530693e drm/nvc0/graph: fix fuc, and enable acceleration on GF119
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23 22:59:31 +10:00
Ben Skeggs
5ddf4d4a54 drm/nouveau/bios: cache ramcfg strap on later chipsets
This fixes suspend/resume on at least Quadro 400.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23 22:59:30 +10:00
Ben Skeggs
3d8ec27739 drm/nouveau/mxm: silence output if no bios data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23 22:59:29 +10:00
Ben Skeggs
0dd660d4ab drm/nouveau/bios: parse/display extra version component
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23 22:59:28 +10:00