Commit graph

361,794 commits

Author SHA1 Message Date
Chris Wilson
f05bb0c7b6 drm/i915: GFX_MODE Flush TLB Invalidate Mode must be '1' for scanline waits
On SNB, if bit 13 of GFX_MODE, Flush TLB Invalidate Mode, is not set to 1,
the hardware can not program the scanline values. Those scanline values
then control when the signal is sent from the display engine to the render
ring for MI_WAIT_FOR_EVENTs. Note setting this bit means that TLB
invalidations must be performed explicitly through the appropriate bits
being set in PIPE_CONTROL.

References: https://bugzilla.kernel.org/show_bug.cgi?id=52311
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-23 00:58:23 +01:00
Chris Wilson
1c8c38c588 drm/i915: Disable AsyncFlip performance optimisations
This is a required workarounds for all products, especially on gen6+
where it causes the command streamer to fail to parse instructions
following a WAIT_FOR_EVENT. We use WAIT_FOR_EVENT for synchronising
between the GPU and the display engines, and so this bit being unset may
cause hangs.

References: https://bugzilla.kernel.org/show_bug.cgi?id=52311
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-23 00:58:22 +01:00
Daniel Vetter
c00db24639 drm/i915: fixup sbi_read/write locking
commit 09153000b8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Dec 12 14:06:44 2012 +0100

    drm/i915: rework locking for intel_dpio|sbi_read|write

reworked the locking around sbi_read/write functions for 3.8-fixes.
But

commit dde86e2db5
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date:   Sat Dec 1 12:04:25 2012 -0200

    drm/i915: add lpt_init_pch_refcl

Added new use-cases in the -next tree which has not been updated in
the merge. Fix it up.

Reported-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-23 00:52:56 +01:00
Laurent Pinchart
6d1aa02f10 omap3isp: Set cam_mclk rate directly
Now that the cam_mclk rate changes are back-propagated to dpll4_m5_ck we
can set the cam_mclk rate directly instead of manually setting the rate
of the parent clock.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Tested-by: Sakari Ailus <sakari.ailus@iki.fi>
2013-01-23 00:44:04 +01:00
Laurent Pinchart
7b2e127759 ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5
The cam_mclk clock is generated through the following clocks chain:

dpll4 -> dpll4_m5 -> dpll4_m5x2 -> cam_mclk

As dpll4_m5 and dpll4_m5x2 do not driver any clock other than cam_mclk,
back-propagate the cam_clk rate changes up to dpll4_m5.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Tested-by: Sakari Ailus <sakari.ailus@iki.fi>
2013-01-23 00:44:03 +01:00
Linus Torvalds
ed06ef318a perf/urgent fixes:
. revert 20b279 - require exclude_guest to use PEBS - kernel side,
   now older binaries will continue working for things like cycles:pp
   without needing to pass extra modifiers, from David Ahern.
 
 . Fix building from 'make perf-*-src-pkg' tarballs, broken by UAPI, from
   Sebastian Andrzej Siewior
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ7yQhAAoJENZQFvNTUqpAjj4P/RR+8WeXpV02yzndhry+Yjav
 L/WQH0CkRRmyUA5akTcpgFrohJCEOi+auHl7ivmDX4XWFavcAkX3H1Yz1FytCOkb
 Cbb9Lv1rGdlTno8fTVUn8mNyTG64AlWrAw3ICixWw6q6I/k6SO7EkKigCxPhmY+2
 BE2EvkZmOY/PEUXgM6HtUdifORatX48p1toS7p3CDQ31cxBN5OVNZUXa1FakJpyH
 7R+1imKLsjuyi/G7Bt061LyWQkOh7L/ITWN+5Rx4RsUwRRT3vm1H9nlqUBsPS0PW
 qfkktkCmn/cFpKbfBipuglnt16jHPMfI/pghKvzx8n2uJMNEGXbfFDJefpzcdih9
 wIRgB6a5bvA8VF6Xpcn0I5JhqLAcnWTer07JgjZevjqYCdZStpbJjvE5131JjTLw
 Dnm7UshE+VFBcA3iXNX64p/X7WDJSk+SIDsJDuNe57dktFVLw76Ibb55XG18Ex7e
 c9QcIEhD1P19VzOniDZQZNEJhqnu5Vjle/eG+JRVRCm/BgoQFyJuD3EooKPN7hHR
 Op4oqf5RhDf7XNH0+Y4rOdRMZRiumdfcEl6kdcQGPJPycxpD7xCJNzBLWK/BvQgT
 Kl0AEkRC0KE2c5LyFttW+g1Byu1rctlMz2TVJDTskTm0XGOQ9mTzsQBP5rgBVt+b
 hQsMMWNVSI+jfm8bTJwx
 =LTjZ
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 . revert 20b279 - require exclude_guest to use PEBS - kernel side, now
   older binaries will continue working for things like cycles:pp
   without needing to pass extra modifiers, from David Ahern.

 . Fix building from 'make perf-*-src-pkg' tarballs, broken by UAPI,
   from Sebastian Andrzej Siewior

[ Pulling directly, Ingo would normally pull but has been unresponsive ]

* tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Fix building from 'make perf-*-src-pkg' tarballs
  perf x86: revert 20b279 - require exclude_guest to use PEBS - kernel side
2013-01-22 14:32:07 -08:00
Linus Torvalds
343391b1d1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
 "Improve the stability of the linux kernel on the parisc architecture"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: sigaltstack doesn't round ss.ss_sp as required
  parisc: improve ptrace support for gdb single-step
  parisc: don't claim cpu irqs more than once
  parisc: avoid undefined shift in cnv_float.h
2013-01-22 14:30:35 -08:00
Borislav Petkov
0f08669e86 EDAC, MCE, AMD: Remove unneeded exports
Initially, those strings describing different parts of an MCE message
were shared with amd64_edac and were therefore exported to modules.
However, all except pp_msgs are used only in one place right now so hide
them and make them static.

No functionality change.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-22 22:40:03 +01:00
Jacob Shin
980eec8b20 EDAC, MCE, AMD: Add MCE decoding support for Family 16h
Add MCE decoding logic for AMD Family 16h processors.

Boris:

- drop unneeded uu_msgs export
- exit early in cat_mc1_mce and save us an indentation level

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-22 22:39:58 +01:00
Jacob Shin
4a73d3de63 EDAC, MCE, AMD: Make MC2 decoding per-family
Currently only AMD Family 15h processors have special handling for MC2
errors. Since upcoming Family 16h will also need unique handling, let's
make MC2 handling part of amd_decoder_ops.

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-22 22:39:54 +01:00
Borislav Petkov
acc7fcb400 amd64_edac: Remove dead code
5e2af0c09e ("edac: Don't initialize csrow's first_page & friends when
not needed") removed useless initialization of variables but left in the
functions which did that. They're unused now so drop them.

Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-22 22:39:41 +01:00
Matthew Garrett
efa1719458 cpufreq: Add module aliases for acpi-cpufreq
The acpi core will call request_module("acpi-cpufreq") on subsystem init,
but this will fail if the module isn't available at that stage of boot.
Add some module aliases to ensure that udev can load the module on Intel
and AMD systems with the appropriate feature bits - I /think/ that this
will also work on VIA systems, but haven't verified that.

References: http://lkml.kernel.org/r/1448223.sdUJnNSRz4@vostro.rjw.lan
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Tested-by: Leonid Isaev <lisaev@umail.iu.edu>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: 3.7+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-22 22:33:46 +01:00
Thierry Reding
f4a18312f4 lib: devres: Fix build breakage
The ERR_PTR() and IS_ERR() macros used by the devm_ioremap_resource()
function are defined in the linux/err.h header. On ARM this seems to be
pulled in by one of the other headers but the build fails at least on
OpenRISC.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 13:31:18 -08:00
Mimi Zohar
5a73fcfa88 ima: differentiate appraise status only for hook specific rules
Different hooks can require different methods for appraising a
file's integrity.  As a result, an integrity appraisal status is
cached on a per hook basis.

Only a hook specific rule, requires the inode to be re-appraised.
This patch eliminates unnecessary appraisals.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2013-01-22 16:10:39 -05:00
Mimi Zohar
d79d72e024 ima: per hook cache integrity appraisal status
With the new IMA policy 'appraise_type=' option, different hooks
can require different methods for appraising a file's integrity.

For example, the existing 'ima_appraise_tcb' policy defines a
generic rule, requiring all root files to be appraised, without
specfying the appraisal method.  A more specific rule could require
all kernel modules, for example, to be signed.

appraise fowner=0 func=MODULE_CHECK appraise_type=imasig
appraise fowner=0

As a result, the integrity appraisal results for the same inode, but
for different hooks, could differ.  This patch caches the integrity
appraisal results on a per hook basis.

Changelog v2:
- Rename ima_cache_status() to ima_set_cache_status()
- Rename and move get_appraise_status() to ima_get_cache_status()
Changelog v0:
- include IMA_APPRAISE/APPRAISED_SUBMASK in IMA_DO/DONE_MASK (Dmitry)
- Support independent MODULE_CHECK appraise status.
- fixed IMA_XXXX_APPRAISE/APPRAISED flags

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2013-01-22 16:10:36 -05:00
Mimi Zohar
f578c08ec9 ima: increase iint flag size
In preparation for hook specific appraise status results, increase
the iint flags size.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2013-01-22 16:10:34 -05:00
Dmitry Kasatkin
0e5a247cb3 ima: added policy support for 'security.ima' type
The 'security.ima' extended attribute may contain either the file data's
hash or a digital signature.  This patch adds support for requiring a
specific extended attribute type.  It extends the IMA policy with a new
keyword 'appraise_type=imasig'.  (Default is hash.)

Changelog v2:
- Fixed Documentation/ABI/testing/ima_policy option syntax
Changelog v1:
- Differentiate between 'required' vs. 'actual' extended attribute

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-01-22 16:10:31 -05:00
Felix Fietkau
c5e818ef08 ath9k_hw: remove a useless WARN_ON
&ah->curchan->ani can never be NULL

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:05:32 -05:00
Felix Fietkau
9dbac67da3 ath9k_hw: reduce struct ar5416AniState size
It is kept per-channel, so removing unnecessary (or constant) fields from
it can save quite a bit of memory.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:05:31 -05:00
Felix Fietkau
f5ffe23aa0 ath9k_hw: remove ath9k_hw_ani_setup and its variables
They are no longer needed for ANI functionality

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:05:31 -05:00
Felix Fietkau
0166b4beec ath9k_hw: make the initval parameter to ath9k_hw_write_array const
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:03:22 -05:00
Felix Fietkau
81b519504f ath9k: use ath_tx_process_buffer instead of open-coding similar code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:03:21 -05:00
Felix Fietkau
1381559ba4 ath9k: clean up processing of pending tx frames on reset
Dropping packets from aggregation sessions is usually not a good idea, as
it might upset the synchronization of the BlockAck receive window of the
remote node. The use of the retry_tx parameter to reset/tx-drain functions
also seemed a bit arbitrary.
This patch removes this parameter altogether and ensures that pending tx
frames are not dropped for no good reason.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:03:21 -05:00
Felix Fietkau
0a62acb1c9 ath9k: stop rx after tx
Completing frame transmission can fail if the rx engine is stopped
prematurely, as the hw might be waiting for an ACK from the other side.
Shutting down tx before rx might make the DMA shutdown more reliable.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:02:15 -05:00
Cong Ding
eee569e403 net: wireless/rtlwifi: fix uninitialized variable issue
The use of variable packet_beacon might be uninitialized in the three files.

Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:01:30 -05:00
Alexey Khoroshilov
662845057f iwlegacy: don't return zero on failure paths in il4965_pci_probe()
If hardware is not ready, il4965_pci_probe() breaks off initialization,
deallocates all resources, but returns zero.
The patch adds -EIO as return value in this case.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:01:30 -05:00
Alexey Khoroshilov
a2ca8ecb8f mwl8k: don't return zero on failure paths in mwl8k_probe[_hw]()
If pci_iomap() fails in mwl8k_probe(), it breaks off initialization,
deallocates all resources, but returns zero.
There is a similar issue when priv->rxd_ops is NULL in mwl8k_probe_hw().

The patch adds proper error code return values.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:01:30 -05:00
Amitkumar Karwar
7532c7d013 mwifiex: correction in status codes used for association failure
When AP responds with appropriate status code, we forward that
code correctly to cfg80211. But sometimes when there is no
response from AP, our firmware uses proprietary status codes.
We will map authentication timeout to WLAN_STATUS_AUTH_TIMEOUT
and other proprietary codes to WLAN_STATUS_UNSPECIFIED_FAILURE.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:01:30 -05:00
Helmut Schaa
84e9e8ebd3 rt2x00: Improve TX status handling for BlockAckReq frames
Since rt2800 hardware isn't capable of reporting the TX status of
BlockAckReq frames implement the TX status handling of BARs in
rt2x00lib. We keep track of all BARs that are send out and try to
match incoming BAs to the appropriate BARs. This allows us to report a
more or less accurate TX status for BAR frames which in turn improves
BA session stability.

This is loosley based on Christian Lamparter's patch for carl9170
"carl9170: fix HT peer BA session corruption".

We have to walk the list of pending BARs for every rx'red BA even
though most BAs don't belong to any of these BARs as they are just
acknowledging an AMPDU. To keep that overhead low use RCU which allows
us to walk the list of pending BARs without the need to acquire a lock.
This however requires us to _copy_ relevant information from the BAR
(RA, TA, control field, start sequence number) into our BAR list entry.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:01:29 -05:00
Dan Carpenter
f49aabf816 prism54: bug in getting auth type
There is a missing break statement so SHARED_KEY authentication doesn't
work.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:01:29 -05:00
Dan Carpenter
e03e8ddbfd b43: N-PHY: fix gain in b43_nphy_get_gain_ctl_workaround_ent()
There were no break statements in this switch statement so everything
used the default settings.  Per Walter Harms's suggestion, I've replaced
the switch statement and done a little cleanup.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:01:29 -05:00
Chen Gang
708d019fd1 drivers/net/wireless: need consider the not '\0' terminated string.
in ray_cs.c:
    the a_current_ess_id is "Null terminated unless ESSID_SIZE long"
    so we need buffer it with '\0' firstly, before using strlen or %s.

  additional information:
    in drivers/net/wireless/rayctl.h:
      "NULL terminated unless 32 long" is a comment at line 616, 664
      ESSID_SIZE is 32, at line 190
    in include/uapi/linux/wireless.h:
      IW_ESSID_MAX_SIZE is also 32
    in drivers/net/wireless/ray_cs.c:
      use strncpy for it, without '\0' terminated, at line 639
      use memcpy for it, assume not '\0' terminated in line 1092..1097
      buffer it with '\0' firstly, before using %s, in line 2576, 2598..2600

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 16:01:29 -05:00
Felix Fietkau
6aaacd8615 ath9k_hw: fix RF bank initialization
ar900*_init_mode_regs needs to be called before RF banks are allocated,
otherwise the storage size of RF banks isn't known. This patch fixes
a memory overrun that can show up as a crash on unloading the module.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22 15:58:48 -05:00
John W. Linville
066433a6fa Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next 2013-01-22 15:40:56 -05:00
John W. Linville
aa3c90b890 Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next 2013-01-22 15:39:51 -05:00
Kees Cook
846a798174 drivers/net/ethernet/fujitsu: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 12:33:47 -08:00
Takashi Iwai
657e1b931d ALSA: hda - Select auto-parser as default for AD codecs
Now all AD codecs have the proper BIOS auto-parser, and we can make
it for default, finally.  (AD1988 already did it because it had the
auto-parser.)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-22 21:20:41 +01:00
Takashi Iwai
a928bd2c56 ALSA: hda - Convert some static quirks to fixup codes for AD codecs
Other remaining quirks are mostly resolvable via pincfg fixes, even if
it matters.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-22 21:20:39 +01:00
Takashi Iwai
9ff4bc8f72 ALSA: hda - Rearrange for dropping static quirk codes in AD codec driver
As done for patch_conexant.c, put ifdef ENABLE_AD_STATIC_QUIRKS for
preparing t odrop the static quirk codes in patch_analog.c.

The whole static quirk code can be omitted by commenting out
ENABLE_AD_STATIC_QUIRKS define now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-22 21:19:38 +01:00
Kees Cook
6cba014857 drivers/net/wireless/rtlwifi: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Chaoming Li <chaoming_li@realsil.com.cn>
Acked-by: John W. Linville <linville@tuxdriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 12:01:36 -08:00
Kees Cook
73272db9d4 drivers/net/wireless/zd1211rw: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Ulrich Kunitz <kune@deine-taler.de>
Acked-by: John W. Linville <linville@tuxdriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 12:01:36 -08:00
Kees Cook
a4b4d2148c drivers/net/wireless/rtl818x: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

Acked-by: John W. Linville <linville@tuxdriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 12:01:35 -08:00
Kees Cook
a716ff169b drivers/net/wireless/rt2x00: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Ivo van Doorn <IvDoorn@gmail.com>
CC: Gertjan van Wingerde <gwingerde@gmail.com>
CC: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 12:01:35 -08:00
Kees Cook
ce15ffbeb9 drivers/net/wireless/p54: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 12:01:35 -08:00
Kees Cook
23681908b5 drivers/net/wireless/ipw2x00: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 12:01:35 -08:00
Kees Cook
afd19ef0b1 drivers/net/wireless/b43: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Stefano Brivio <stefano.brivio@polimi.it>
Acked-by: John W. Linville <linville@tuxdriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 12:01:35 -08:00
Kees Cook
49f82162ea drivers/net/wireless/ath/carl9170: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 12:01:35 -08:00
Kees Cook
33fd8fe985 drivers/net/wireless/ath/ath6kl: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Kalle Valo <kvalo@qca.qualcomm.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 12:01:35 -08:00
Kees Cook
798f4e5eaa drivers/net/wireless: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

Acked-by: John W. Linville <linville@tuxdriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 12:01:35 -08:00
Kees Cook
8aa53cb3a5 drivers/net/ppp: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 12:01:34 -08:00