The PI tuple must be contained within the metadata value, so validate
that pi_offset + pi_tuple_size <= metadata_size. This guards against
block drivers that report invalid pi_offset values.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A warning was triggered as follows:
WARNING: kernel/cgroup/cpuset.c:1651 at remote_partition_disable+0xf7/0x110
RIP: 0010:remote_partition_disable+0xf7/0x110
RSP: 0018:ffffc90001947d88 EFLAGS: 00000206
RAX: 0000000000007fff RBX: ffff888103b6e000 RCX: 0000000000006f40
RDX: 0000000000006f00 RSI: ffffc90001947da8 RDI: ffff888103b6e000
RBP: ffff888103b6e000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: ffff88810b2e2728 R12: ffffc90001947da8
R13: 0000000000000000 R14: ffffc90001947da8 R15: ffff8881081f1c00
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f55c8bbe0b2 CR3: 000000010b14c000 CR4: 00000000000006f0
Call Trace:
<TASK>
update_prstate+0x2d3/0x580
cpuset_partition_write+0x94/0xf0
kernfs_fop_write_iter+0x147/0x200
vfs_write+0x35d/0x500
ksys_write+0x66/0xe0
do_syscall_64+0x6b/0x390
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f55c8cd4887
Reproduction steps (on a 16-CPU machine):
# cd /sys/fs/cgroup/
# mkdir A1
# echo +cpuset > A1/cgroup.subtree_control
# echo "0-14" > A1/cpuset.cpus.exclusive
# mkdir A1/A2
# echo "0-14" > A1/A2/cpuset.cpus.exclusive
# echo "root" > A1/A2/cpuset.cpus.partition
# echo 0 > /sys/devices/system/cpu/cpu15/online
# echo member > A1/A2/cpuset.cpus.partition
When CPU 15 is offlined, subpartitions_cpus gets cleared because no CPUs
remain available for the top_cpuset, forcing partitions to share CPUs with
the top_cpuset. In this scenario, disabling the remote partition triggers
a warning stating that effective_xcpus is not a subset of
subpartitions_cpus. Partitions should be invalidated in this case to
inform users that the partition is now invalid(cpus are shared with
top_cpuset).
To fix this issue:
1. Only emit the warning only if subpartitions_cpus is not empty and the
effective_xcpus is not a subset of subpartitions_cpus.
2. During the CPU hotplug process, invalidate partitions if
subpartitions_cpus is empty.
Fixes: f62a5d3936 ("cgroup/cpuset: Remove remote_partition_check() & make update_cpumasks_hier() handle remote partition")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When imported dma-bufs are destroyed, TTM is not fully
individualizing the dma-resv, but it *is* copying the fences that
need to be waited for before declaring idle. So in the case where
the bo->resv != bo->_resv we can still drop the preempt-fences, but
make sure we do that on bo->_resv which contains the fence-pointer
copy.
In the case where the copying fails, bo->_resv will typically not
contain any fences pointers at all, so there will be nothing to
drop. In that case, TTM would have ensured all fences that would
have been copied are signaled, including any remaining preempt
fences.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: fa0af721bd ("drm/ttm: test private resv obj on release/destroy")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251217093441.5073-1-thomas.hellstrom@linux.intel.com
Update call sites in `rust_debugfs.rs` to import `ARef`
from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Link: https://patch.msgid.link/20251123092438.182251-10-shankari.ak0208@gmail.com
[ Add 'debugfs' to the commit subject; be consistent with the existing
import style for now. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Update call sites in `scatterlist.rs` to import `ARef`
from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Link: https://patch.msgid.link/20251123092438.182251-8-shankari.ak0208@gmail.com
[ Change subject prefix to from 'kernel' to 'scatterlist'. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmlDyJcTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnOZdB/9o/qoE3SiQkgNbVce4iDQqm/4jZFEf
Wz4KjpucPxw00z25VbINeM6G4Tjfztmw6T6m1GarwEzW0HTNGUirjXJr60Bxz3OF
DgjPfc/w5PU5f/I84RBdSnnFEGKt1mAd3WrJjBEGbLZYxx3EHh+PxJXDM2qAmxVT
9Ud2U6X9oEdor78IFrO8Z/rt2YMPBZJ0JmldQYkvxmBmUiDMgcY/E9vNHejUwHTc
ysE7c6MJ7tGalm6jXlV5kpWycsNbY52TbOD242jTJnWVHr2GKOu8k8GymkXSZnQP
NG/h20elyIsD5N0OaxQODorM8UiEueovO24TqVqwl7hxTw8IFK+AUXC5
=cXcU
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-12-18
this is a pull request of 3 patches for net/main.
Tetsuo Handa contributes 2 patches to fix race windows in the j1939
protocol to properly handle disappearing network devices.
The last patch is by me, it fixes a build dependency with the CAN
drivers, that got introduced while fixing a dependency between the CAN
protocol and CAN device code.
linux-can-fixes-for-6.19-20251218
* tag 'linux-can-fixes-for-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: fix build dependency
can: j1939: make j1939_sk_bind() fail if device is no longer registered
can: j1939: make j1939_session_activate() fail if device is no longer registered
====================
Link: https://patch.msgid.link/20251218123132.664533-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
An NFSv4 client that sets an ACL with a named principal during file
creation retrieves the ACL afterwards, and finds that it is only a
default ACL (based on the mode bits) and not the ACL that was
requested during file creation. This violates RFC 8881 section
6.4.1.3: "the ACL attribute is set as given".
The issue occurs in nfsd_create_setattr(), which calls
nfsd_attrs_valid() to determine whether to call nfsd_setattr().
However, nfsd_attrs_valid() checks only for iattr changes and
security labels, but not POSIX ACLs. When only an ACL is present,
the function returns false, nfsd_setattr() is skipped, and the
POSIX ACL is never applied to the inode.
Subsequently, when the client retrieves the ACL, the server finds
no POSIX ACL on the inode and returns one generated from the file's
mode bits rather than returning the originally-specified ACL.
Reported-by: Aurélien Couderc <aurelien.couderc2002@gmail.com>
Fixes: c0cbe70742 ("NFSD: add posix ACLs to struct nfsd_attrs")
Cc: Roland Mainz <roland.mainz@nrubsig.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
>From RFC 8881:
5.8.1.14. Attribute 75: suppattr_exclcreat
> The bit vector that would set all REQUIRED and RECOMMENDED
> attributes that are supported by the EXCLUSIVE4_1 method of file
> creation via the OPEN operation. The scope of this attribute
> applies to all objects with a matching fsid.
There's nothing in RFC 8881 that states that suppattr_exclcreat is
or is not allowed to contain bits for attributes that are clear in
the reported supported_attrs bitmask. But it doesn't make sense for
an NFS server to indicate that it /doesn't/ implement an attribute,
but then also indicate that clients /are/ allowed to set that
attribute using OPEN(create) with EXCLUSIVE4_1.
The FATTR4_WORD2_TIME_DELEG attributes are also not to be allowed
for OPEN(create) with EXCLUSIVE4_1. It doesn't make sense to set
a delegated timestamp on a new file.
Fixes: 7e13f4f8d2 ("nfsd: handle delegated timestamps in SETATTR")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
>From RFC 8881:
5.8.1.14. Attribute 75: suppattr_exclcreat
> The bit vector that would set all REQUIRED and RECOMMENDED
> attributes that are supported by the EXCLUSIVE4_1 method of file
> creation via the OPEN operation. The scope of this attribute
> applies to all objects with a matching fsid.
There's nothing in RFC 8881 that states that suppattr_exclcreat is
or is not allowed to contain bits for attributes that are clear in
the reported supported_attrs bitmask. But it doesn't make sense for
an NFS server to indicate that it /doesn't/ implement an attribute,
but then also indicate that clients /are/ allowed to set that
attribute using OPEN(create) with EXCLUSIVE4_1.
Ensure that the SECURITY_LABEL and ACL bits are not set in the
suppattr_exclcreat bitmask when they are also not set in the
supported_attrs bitmask.
Fixes: 8c18f2052e ("nfsd41: SUPPATTR_EXCLCREAT attribute")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When nfsd_create_serv() calls percpu_ref_init() to initialize
nn->nfsd_net_ref, it allocates both a percpu reference counter
and a percpu_ref_data structure (64 bytes). However, if the
function fails later due to svc_create_pooled() returning NULL
or svc_bind() returning an error, these allocations are not
cleaned up, resulting in a memory leak.
The leak manifests as:
- Unreferenced percpu allocation (8 bytes per CPU)
- Unreferenced percpu_ref_data structure (64 bytes)
Fix this by adding percpu_ref_exit() calls in both error paths
to properly clean up the percpu_ref_init() allocations.
This patch fixes the percpu_ref leak in nfsd_create_serv() seen
as an auxiliary leak in syzbot report 099461f8558eb0a1f4f3; the
prepare_creds() and vsock-related leaks in the same report
remain to be addressed separately.
Reported-by: syzbot+099461f8558eb0a1f4f3@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=099461f8558eb0a1f4f3
Fixes: 47e988147f ("nfsd: add nfsd_serv_try_get and nfsd_serv_put")
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add a pattern for sdram channel node name.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Clément Le Goffic <legoffic.clement@gmail.com>
Link: https://patch.msgid.link/20251118-b4-ddr-bindings-v9-5-a033ac5144da@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add in the memory channel binding the DDR4 compatible to support DDR4
memory channel.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Clément Le Goffic <legoffic.clement@gmail.com>
Link: https://patch.msgid.link/20251118-b4-ddr-bindings-v9-4-a033ac5144da@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
LPDDR, DDR and so SDRAM channels exist and share the same properties, they
have a compatible, ranks, and an io-width.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Clément Le Goffic <legoffic.clement@gmail.com>
Link: https://patch.msgid.link/20251118-b4-ddr-bindings-v9-3-a033ac5144da@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Introduce JEDEC compliant DDR bindings, that use new memory-props binding.
The DDR4 compatible can be made of explicit vendor names and part
numbers or be of the form "ddrX-YYYY,AAAA...-ZZ" when associated with an
SPD, where (according to JEDEC SPD4.1.2.L-6):
- YYYY is the manufacturer ID
- AAAA... is the part number
- ZZ is the revision ID
The former form is useful when the SDRAM vendor and part number are
known, for example, when memory is soldered on the board.
The latter form is useful when SDRAM nodes are created at runtime by
boot firmware that doesn't have access to static part number information.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Signed-off-by: Clément Le Goffic <legoffic.clement@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251118-b4-ddr-bindings-v9-2-a033ac5144da@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
LPDDR and DDR bindings are SDRAM types and are likely to share the same
properties (at least for density, io-width and reg).
To avoid bindings duplication, factorise the properties.
The compatible description has been updated because the MR (Mode
registers) used to get manufacturer ID and revision ID are not present
in case of DDR.
Those information should be in a SPD (Serial Presence Detect) EEPROM in
case of DIMM module or are known in case of soldered memory chips as
they are in the datasheet of the memory chips.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Clément Le Goffic <legoffic.clement@gmail.com>
Link: https://patch.msgid.link/20251118-b4-ddr-bindings-v9-1-a033ac5144da@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The sysfs buffer passed to alarms_store() is allocated with 'size + 1'
bytes and a NUL terminator is appended. However, the 'size' argument
does not account for this extra byte. The original code then allocated
'size' bytes and used strcpy() to copy 'buf', which always writes one
byte past the allocated buffer since strcpy() copies until the NUL
terminator at index 'size'.
Fix this by parsing the 'buf' parameter directly using simple_strtoll()
without allocating any intermediate memory or string copying. This
removes the overflow while simplifying the code.
Cc: stable@vger.kernel.org
Fixes: e2c94d6f57 ("w1_therm: adding alarm sysfs entry")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251216145007.44328-2-thorsten.blum@linux.dev
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Currently, the VLAN id may be used without validation when
receive a VLAN configuration mailbox from VF. The length of
vlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may cause
out-of-bounds memory access once the VLAN id is bigger than
or equal to VLAN_N_VID.
Therefore, VLAN id needs to be checked to ensure it is within
the range of VLAN_N_VID.
Fixes: fe4144d47e ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211023737.2327018-4-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, rss_size = num_tqps / tc_num. If tc_num is 1, then num_tqps
equals rss_size. However, if the tc_num is greater than 1, then rss_size
will be less than num_tqps, causing the tqp_index check for subsequent TCs
using rss_size to always fail.
This patch uses the num_tqps to check whether tqp_index is out of range,
instead of rss_size.
Fixes: 326334aad0 ("net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211023737.2327018-3-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp
is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to
min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller
than hdev->num_tqps, which causes some hdev->htqp[i] to remain
uninitialized in hclgevf_knic_setup().
Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps,
ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent
and that all elements are properly initialized.
Fixes: e2cb1dec97 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211023737.2327018-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the current implementation, the enetc_xdp_xmit() always transmits
redirected XDP frames even if the link is down, but the frames cannot
be transmitted from TX BD rings when the link is down, so the frames
are still kept in the TX BD rings. If the XDP program is uninstalled,
users will see the following warning logs.
fsl_enetc 0000:00:00.0 eno0: timeout for tx ring #6 clear
More worse, the TX BD ring cannot work properly anymore, because the
HW PIR and CIR are not equal after the re-initialization of the TX
BD ring. At this point, the BDs between CIR and PIR are invalid,
which will cause a hardware malfunction.
Another reason is that there is internal context in the ring prefetch
logic that will retain the state from the first incarnation of the ring
and continue prefetching from the stale location when we re-initialize
the ring. The internal context is only reset by an FLR. That is to say,
for LS1028A ENETC, software cannot set the HW CIR and PIR when
initializing the TX BD ring.
It does not make sense to transmit redirected XDP frames when the link is
down. Add a link status check to prevent transmission in this condition.
This fixes part of the issue, but more complex cases remain. For example,
the TX BD ring may still contain unsent frames when the link goes down.
Those situations require additional patches, which will build on this
one.
Fixes: 9d2b68cc10 ("net: enetc: add support for XDP_REDIRECT")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251211020919.121113-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test case that reproduces deadlock scenario where the user has
a drr qdisc attached to root and has a mirred action that redirects to
self on egress
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251210162255.1057663-2-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These objects are meant to be used by the GPU firmware or by the PM unit
within the GPU, in which case they may contain physical addresses.
This adds a layer of protection against exposing potentially exploitable
information outside of the driver.
Fixes: ff5f643de0 ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251208-no-export-pm-fw-obj-v1-1-83ab12c61693@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Components are bound inside a new devres group so that any resources
allocated can be released on bind failure and on unbind without
affecting anything else.
Switch to using device managed regmap allocation for consistency while
dropping the misleading comment claiming that devres cannot be used.
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251201092259.11761-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new unused state to the admin completion contexts state machine
instead of the occupied field. This improves the completion validity
check because it now enforce the context to be in submitted state prior
to completing it. Also add allocated state as a intermediate state
between unused and submitted.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://patch.msgid.link/20251210130614.36460-3-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In admin command completion, we receive a CQE with the command ID which
is constructed from context index and entropy bits from the admin queue
producer counter. To try to detect memory corruptions in the received
CQE, validate the full command ID of the fetched context with the CQE
command ID. If there is a mismatch, complete the CQE with error.
Also use LSBs of the admin queue producer counter to better detect
entropy mismatch between smaller number of commands.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://patch.msgid.link/20251210130614.36460-2-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If kstrdup() fails in init_dev(), then the newly allocated ID is lost.
Fixes: 64e8a6ece1 ("block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable necessary drivers for booting Qualcomm Kaanapali QRD and MTP
boards. The serial engine must be properly setup before kernel reach
"init", so UART driver and its dependencies needs to be built in, enable
its dependency GCC, interconnect and pinctrl as built-in meanwhile enable
TCSRCC as module.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-knp-dts-v4-2-1541bebeb89f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a handshake request is cancelled it is removed from the
handshake_net->hn_requests list, but it is still present in the
handshake_rhashtbl until it is destroyed.
If a second cancellation request arrives for the same handshake request,
then remove_pending() will return false... and assuming
HANDSHAKE_F_REQ_COMPLETED isn't set in req->hr_flags, we'll continue
processing through the out_true label, where we put another reference on
the sock and a refcount underflow occurs.
This can happen for example if a handshake times out - particularly if
the SUNRPC client sends the AUTH_TLS probe to the server but doesn't
follow it up with the ClientHello due to a problem with tlshd. When the
timeout is hit on the server, the server will send a FIN, which triggers
a cancellation request via xs_reset_transport(). When the timeout is
hit on the client, another cancellation request happens via
xs_tls_handshake_sync().
Add a test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED) in the pending cancel
path so duplicate cancels can be detected.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Suggested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20251209193015.3032058-1-smayhew@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add initial support for Qualcomm Kaanapali QRD board which enables
SD Card, UFS and booting to shell with UART console.
Written with help from Jishnu Prakash (added RPMhPD nodes), Nitin Rawat
(added ufs) and Manish Pandey (added SD Card).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-knp-dts-v4-5-1541bebeb89f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial support for Qualcomm Kaanapali MTP board which enables PCIe,
SD Card, UFS and booting to shell with UART console.
Written with help from Jishnu Prakash (added RPMhPD nodes), Nitin Rawat
(added UFS), Manish Pandey (added SD Card) and Qiang Yu (added PCIe).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-knp-dts-v4-4-1541bebeb89f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The FF-A specification allows NOTIFICATION_INFO_GET to return either a
64-bit (FFA_FN64_SUCCESS) or a 32-bit (FFA_SUCCESS) response, depending on
whether the firmware chooses the SMC64 or SMC32 calling convention.
The driver previously detected the response format by checking ret.a0, but
still interpreted the returned ID lists (x3..x17 or w3..w7) as if they always
followed the 64-bit SMC64 layout. In the SMC32 case, the upper 32 bits of
each argument register are undefined by the calling convention, meaning the
driver could read stale or garbage values when parsing notification IDs.
This resulted in incorrectly decoded partition/VCPU IDs whenever the FF-A
firmware used an SMC32 return path.
Fix the issue by:
- Introducing logic to map list indices to the correct u16 offsets,
depending on whether the response width matches the kernel word size
or is a 32-bit response on a 64-bit kernel.
- Ensuring that the packed ID list is parsed using the proper layout,
avoiding reads from undefined upper halves in the SMC32 case.
With this change, NOTIFICATION_INFO_GET now correctly interprets ID list
entries regardless of the response width, aligning the driver with the FF-A
specification.
Fixes: 3522be48d8 ("firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface")
Reported-by: Sourav Mohapatra <sourav.mohapatra@arm.com>
Message-Id: <20251218142001.2457111-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The tee bus got dedicated callbacks for probe and remove. Make use of
these. This fixes a runtime warning about the driver needing to be
converted to the bus methods.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The tee subsystem recently got a set of dedicated functions to register
(and unregister) a tee driver. Make use of them. These care for setting the
driver's bus (so the explicit assignment can be dropped) and the driver
owner (which is an improvement this driver benefits from).
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
In FPGA Development boards with GPIOs we use the opencores gpio verilog
rtl. This is compatible with the gpio-mmio. Add the compatible string
to allow as below.
Example:
gpio0: gpio@91000000 {
compatible = "opencores,gpio", "brcm,bcm6345-gpio";
reg = <0x91000000 0x1>, <0x91000001 0x1>;
reg-names = "dat", "dirout";
gpio-controller;
#gpio-cells = <2>;
status = "okay";
};
Link: https://opencores.org/projects/gpio
Signed-off-by: Stafford Horne <shorne@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251217080843.70621-2-shorne@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
-----BEGIN PGP SIGNATURE-----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=8bX+
-----END PGP SIGNATURE-----
Merge tag 'nf-25-12-16' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*:
1) Jozsef Kadlecsik is retiring. Fortunately Jozsef will still keep an
eye on ipset patches.
2) remove a bogus direction check from nat core, this caused spurious
flakes in the 'reverse clash' selftest, from myself.
3) nf_tables doesn't need to do chain validation on register store,
from Pablo Neira Ayuso.
4) nf_tables shouldn't revisit chains during ruleset (graph) validation
if possible. Both 3 and 4 were slated for -next initially but there
are now two independent reports of people hitting soft lockup errors
during ruleset validation, so it makes no sense anymore to route
this via -next given this is -stable material. From myself.
5) call cond_resched() in a more frequently visited place during nf_tables
chain validation, this wasn't possible earlier due to rcu read lock,
but nowadays its not held anymore during set walks.
6) Don't fail conntrack packetdrill test with HZ=100 kernels.
netfilter pull request nf-25-12-16
* tag 'nf-25-12-16' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: packetdrill: avoid failure on HZ=100 kernel
netfilter: nf_tables: avoid softlockup warnings in nft_chain_validate
netfilter: nf_tables: avoid chain re-validation if possible
netfilter: nf_tables: remove redundant chain validation on register store
netfilter: nf_nat: remove bogus direction check
MAINTAINERS: Remove Jozsef Kadlecsik from MAINTAINERS file
====================
Link: https://patch.msgid.link/20251216190904.14507-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit [1] added the 40 bytes required by the PSP header+trailer and the
UDP header to MLX5E_ETH_HARD_MTU, which limits the device-wide max
software MTU that could be set. This is not okay, because most packets
are not PSP packets and it doesn't make sense to always reserve space
for headers which won't get added in most cases.
As it turns out, for TCP connections, PSP overhead is already taken into
account in the TCP MSS calculations via inet_csk(sk)->icsk_ext_hdr_len.
This was added in commit [2]. This means that the extra space reserved
in the hard MTU for mlx5 ends up unused and wasted.
Remove the unnecessary 40 byte reservation from hard MTU.
[1] commit e5a1861a29 ("net/mlx5e: Implement PSP Tx data path")
[2] commit e97269257f ("net: psp: update the TCP MSS to reflect PSP
packet overhead")
Fixes: e5a1861a29 ("net/mlx5e: Implement PSP Tx data path")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-10-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During channel reconfiguration (e.g., ethtool private flags changes),
the driver can trigger a kernel BUG_ON in dql_completed() with the error
"kernel BUG at lib/dynamic_queue_limits.c:99".
The issue occurs in the following sequence:
During mlx5e_safe_switch_params(), old channels are deactivated via
mlx5e_deactivate_txqsq(). New channels are created and activated, taking
ownership of the netdev_queues and their BQL state.
When old channels are closed via mlx5e_close_txqsq(), there may be
pending TX descriptors (sq->cc != sq->pc) that were in-flight during the
deactivation.
mlx5e_free_txqsq_descs() frees these pending descriptors and attempts to
complete them via netdev_tx_completed_queue().
However, the BQL state (dql->num_queued and dql->num_completed) have
been reset in mlx5e_activate_txqsq and belong to the new queue owner,
leading to dql->num_queued - dql->num_completed < nbytes.
This triggers BUG_ON(count > num_queued - num_completed) in
dql_completed().
Fixes: 3b88a535a8 ("net/mlx5e: Defer channels closure to reduce interface down time")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-9-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When initializing the MAC addresses for an outbound IPsec packet offload
rule in mlx5e_ipsec_init_macs, the call to dst_neigh_lookup is used to
find the next-hop neighbor (typically the gateway in tunnel mode).
This call might create a new neighbor entry if one doesn't already
exist. This newly created entry starts in the INCOMPLETE state, as the
kernel hasn't yet sent an ARP or NDISC probe to resolve the MAC
address. In this case, neigh_ha_snapshot will correctly return an
all-zero MAC address.
IPsec packet offload requires the actual next-hop MAC address to
program the rule correctly. If the neighbor state is INCOMPLETE when
the rule is created, the hardware rule is programmed with an all-zero
destination MAC address. Packets sent using this rule will be
subsequently dropped by the receiving network infrastructure or host.
This patch adds a check specifically for the outbound offload path. If
neigh_ha_snapshot returns an all-zero MAC address, it proactively
calls neigh_event_send(n, NULL). This ensures the kernel immediately
sends the initial ARP or NDISC probe if one isn't already pending,
accelerating the resolution process. This helps prevent the hardware
rule from being programmed with an invalid MAC address and avoids
packet drops due to unresolved neighbors.
Fixes: 71670f766b ("net/mlx5e: Support routed networks during IPsec MACs initialization")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-8-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace ipv6_stub->ipv6_dst_lookup_flow() with ip6_dst_lookup() in
mlx5e_ipsec_init_macs() since IPsec transformations are not needed
during Security Association setup - only basic routing information is
required for nexthop MAC address resolution.
This resolves an issue where XfrmOutNoStates error counter would be
incremented when xfrm policy is configured before xfrm state, as the
IPsec-aware routing function would attempt policy checks during SA
initialization.
Fixes: 71670f766b ("net/mlx5e: Support routed networks during IPsec MACs initialization")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The firmware reset mechanism can be triggered by asynchronous events,
which may race with other devlink operations like devlink reload or
devlink dev eswitch set, potentially leading to inconsistent states.
This patch addresses the race by using the devl_lock to serialize the
firmware reset against other devlink operations. When a reset is
requested, the driver attempts to acquire the lock. If successful, it
sets a flag to block devlink reload or eswitch changes, ACKs the reset
to firmware and then releases the lock. If the lock is already held by
another operation, the driver NACKs the firmware reset request,
indicating that the reset cannot proceed.
Firmware reset does not keep the devl_lock and instead uses an internal
firmware reset bit. This is because firmware resets can be triggered by
asynchronous events, and processed in different threads. It is illegal
and unsafe to acquire a lock in one thread and attempt to release it in
another, as lock ownership is intrinsically thread-specific.
This change ensures that firmware resets and other devlink operations
are mutually exclusive during the critical reset request phase,
preventing race conditions.
Fixes: 38b9f903f2 ("net/mlx5: Handle sync reset request event")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mateusz Berezecki <mberezecki@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
