- s390 selects GENERIC_LOCKBREAK when PREEMPT is enabled to tackle
an old compile error that no longer exists. Since recently PREEMPT
is always enabled, which causes massive performance regressions.
Remove GENERIC_LOCKBREAK from s390 Kconfig to fix the degradation.
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaiq9bRccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8FCuAQDlvObouwyTRvY5xZVKCw4LChA1
DlVeSwoEw/y9VPqShgD8DXviQZNlPxD5gDQU+vptYeK0RlL/U3oHpmUxNnWDDgM=
=QmVH
-----END PGP SIGNATURE-----
Merge tag 's390-7.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fix from Alexander Gordeev:
- s390 selects GENERIC_LOCKBREAK when PREEMPT is enabled to tackle an
old compile error that no longer exists. Since recently PREEMPT is
always enabled, this LOCKBREAK config causes massive performance
regressions.
Remove GENERIC_LOCKBREAK from s390 Kconfig to fix the degradation.
* tag 's390-7.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Remove GENERIC_LOCKBREAK Kconfig option
This is relatively small, mostly because we are a bit behind our PW
queue. I'm not aware of any pending regression.
Current release - regressions:
- netfilter: nf_tables_offload: drop device refcount on error
Previous releases - regressions:
- core: add pskb_may_pull() to skb_gro_receive_list()
- xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
- ipv6: fix a potential NPD in cleanup_prefix_route()
- ipv4: fix use-after-free caused by the fqdir_pre_exit() flush
- eth: bnxt_en: fix NULL pointer dereference
- eth: emac: fix use-after-free during device removal
- eth: octeontx2-af: fix memory leak in rvu_setup_hw_resources()
- eth: tun: zero the whole vnet header in tun_put_user()
- eth: sit: reload inner IPv6 header after GSO offloads
Previous releases - always broken:
- core: fix double-free in netdev_nl_bind_rx_doit()
- netfilter: nf_log: validate MAC header was set before dumping it
- xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
- tcp: restrict SO_ATTACH_FILTER to priv users
- mctp: usb: fix race between urb completion and rx_retry cancellation
- eth: mlx5: fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
- eth: mvpp2: sync RX data at the hardware packet offset
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=xvWb
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec and netfilter.
This is relatively small, mostly because we are a bit behind our PW
queue. I'm not aware of any pending regression.
Current release - regressions:
- netfilter: nf_tables_offload: drop device refcount on error
Previous releases - regressions:
- core: add pskb_may_pull() to skb_gro_receive_list()
- xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
- ipv6: fix a potential NPD in cleanup_prefix_route()
- ipv4: fix use-after-free caused by the fqdir_pre_exit() flush
- eth:
- bnxt_en: fix NULL pointer dereference
- emac: fix use-after-free during device removal
- octeontx2-af: fix memory leak in rvu_setup_hw_resources()
- tun: zero the whole vnet header in tun_put_user()
- sit: reload inner IPv6 header after GSO offloads
Previous releases - always broken:
- core: fix double-free in netdev_nl_bind_rx_doit()
- netfilter: nf_log: validate MAC header was set before dumping it
- xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
- tcp: restrict SO_ATTACH_FILTER to priv users
- mctp: usb: fix race between urb completion and rx_retry
cancellation
- eth:
- mlx5: fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
- mvpp2: sync RX data at the hardware packet offset"
* tag 'net-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
octeontx2-af: fix IP fragment flag corruption on custom KPU profile load
ipv6: Fix a potential NPD in cleanup_prefix_route()
net: txgbe: initialize PHY interface to 0
net: txgbe: distinguish module types by checking identifier
net: txgbe: initialize module info buffer
net: mvpp2: build skb from XDP-adjusted data on XDP_PASS
net: mvpp2: refill RX buffers before XDP or skb use
net: mvpp2: limit XDP frame size to the RX buffer
net: mvpp2: sync RX data at the hardware packet offset
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
netfilter: nf_log: validate MAC header was set before dumping it
netfilter: x_tables: avoid leaking percpu counter pointers
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
netfilter: nf_tables_offload: drop device refcount on error
netfilter: revalidate bridge ports
rds: mark snapshot pages dirty in rds_info_getsockopt()
ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()
ptp: ocp: fix resource freeing order
...
The ECs in the IdeaPads that need the delay_suspend quirk send lots
of messages when charging, which not only causes intermediate wakeups
when suspended, but also prevents the device from reaching the deepest
suspend state.
Because of this amd_pmc_intermediate_wakeup_need_delay() returns false
during intermediate wakeups and amd_pmc_want_suspend_delay() is called.
So far it always logged its "Delaying suspend by 2.5s ..." messages
then, which spams dmesg. This commit makes sure that those messages are
only logged once per suspend.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221383
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611150426.3683372-5-daniel@gibson.sh
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Enabling the new delay_suspend module parameter delays suspend for
2.5 seconds which is known to help for some AMD-based Lenovo Laptops
that otherwise failed to send/receive events for key presses or the
lid switch after s2idle. Apparently the EC needs to do some things
in the background before suspend or it gets into a bad state.
There are many reports of AMD-based laptops (mostly but not exclusively
IdeaPads) about similar issues on the web; this parameter gives
affected users an easy way to try out if their issues have the same
root cause and to work around them until their specific device is added
to the quirks list.
The parameter description has a note encouraging users to report
their device so it can be added to the quirks list, inspired by a
similar request in parameter descriptions of the ideapad-laptop module.
The module parameter can be set to "1" to explicitly enable it,
"0" to disable it even on devices that are assumed to be affected,
or -1 (the default) to enable it if the device is assumed to be affected
(according to fwbug_list[])
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221383
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611150426.3683372-4-daniel@gibson.sh
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some IdeaPad Slim 3 devices and similar with AMD CPUs have a
nonfunctional keyboard and lid switch after s2idle.
It helps to delay suspend by 2.5 seconds so the EC has some time
to do whatever it needs to get done before suspend - unfortunately
at least on my 16ABR8 waking it with a timer (wakealarm) still
triggers the issue, but at least normal resume via keypress or
lid works fine. On the 14ARP10 wakealarm has been reported to also
work fine with this patch.
This issue has been reported for many different devices, this patch
has been tested with the Zen3-based IdeaPad Slim 3 16ABR8 (82XR)
and the Zen3+-based IdeaPad Slim 3 14ARP10 (83K6) and IdeaPad Slim 3
15ARP10 (83MM).
Reported-by: Sindre Henriksen <sindrehenriksen93@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221383
Tested-by: Sindre Henriksen <sindrehenriksen93@gmail.com>
Suggested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611150426.3683372-3-daniel@gibson.sh
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Refactor code introduced by commit 9f5595d5f0 ("pmc: Require at
least 2.5 seconds between HW sleep cycles") to allow adding different
conditions for that delay in an upcoming change.
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611150426.3683372-2-daniel@gibson.sh
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
aie2_populate_range() jumps back to the again label without calling
mmput(mm), leaking a reference to the mm_struct.
Add the missing mmput() before jumping to again.
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260610151127.2994185-1-lizhi.hou@amd.com
Merge thermal control testing facility updates for 7.2:
- Replace sscanf() with kstrtoul() or kstrtoint() in several places in
the thermal testing code (Ovidiu Panait)
- Make the thermal testing facility reject missing command arguments to
avoid NULL pointer dereferences (Samuel Moelius)
* thermal-testing:
thermal: sysfs: Replace sscanf() with kstrtoul()
thermal: testing: Replace sscanf() with kstrtoint()
thermal: testing: reject missing command arguments
In case of a kernel thread __ret_from_fork() calls the specified function
indirectly. Fix the kernel thread function pointer, since kernel threads
return an int instead of void.
Fixes: 56e62a7370 ("s390: convert to generic entry")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Most of the privers already have this correctly placed, so adjust
the missing ones. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505102913.188406-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add basic driver support for NXPs TJA1145 CAN transceiver which brings the
PHY up/down by switching to normal/standby mode using SPI commands.
Tested-by: lee.lockhey@gmail.com
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20260602-tja1145-support-v6-2-0e0ffc8ee63d@liebherr.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Adding documentation for NXPs TJA1145 CAN transceiver, which resides like
the ti,tcan104x-can.yaml in the same directory as other generic PHY
subsystem bindings. At the moment there is only support for simple PHYs
by using regulator bindings in combination with can-transceiver.yaml or
PHYs that implement the generic PHY subsystem like the NXP TJA1145.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20260602-tja1145-support-v6-1-0e0ffc8ee63d@liebherr.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If mixel_lvds_phy_reset() fails in probe after pm_runtime_enable(),
the function returns directly without calling pm_runtime_disable(),
leaving runtime PM permanently enabled for the device.
Fix this by using devm_pm_runtime_enable() so that cleanup is
automatic on any probe failure or driver unbind. This also allows
removing the manual err label and the .remove callback.
Fixes: 06ff622d61 ("phy: freescale: Add i.MX8qm Mixel LVDS PHY support")
Acked-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260605-lvds-v2-1-3ce7539d1104@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When test descriptions are extremely long (e.g., the truncated perf.data
graceful handling test is 103 characters long), they wrap across terminal
boundaries.
Because the ANSI escape code to delete the line (PERF_COLOR_DELETE_LINE)
only clears a single terminal line, visual wrapping leaves orphan
wrapped lines on the screen, which results in the test description being
printed multiple times.
Resolve this by checking the terminal width (get_term_dimensions) and
dynamically truncating the printed test description to fit within the
available columns, leaving safety space for the prefix index and status
suffix.
Also, remove the width padding from the test suite headers which do not
display inline status messages. This prevents their trailing colons from
wrapping onto new lines on standard width terminals.
Finally, avoid GCC 16's -Wformat-truncation warnings by delegating the
description padding to pr_info's %-*s format specifier instead of padding
within a temporary buffer, and clamp the truncation limit to the temporary
buffer's size.
JUnit XML output and the failure summary report still print the full,
untruncated test descriptions.
Assisted-by: Gemini-CLI:Google Gemini 3.1 Pro
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sdca_dev_unregister_functions() iterates over all SDCA function
descriptors and calls sdca_dev_unregister() on each func_dev without
checking for NULL. When a function registration has failed partway
through, or the device cleanup races with probe deferral, func_dev
entries may be NULL, leading to a kernel oops:
BUG: kernel NULL pointer dereference, address: 0000000000000040
RIP: 0010:device_del+0x1e/0x3e0
Call Trace:
sdca_dev_unregister_functions+0x37/0x60 [snd_soc_sdca]
release_nodes+0x35/0xb0
devres_release_all+0x90/0x100
device_unbind_cleanup+0xe/0x80
device_release_driver_internal+0x1c1/0x200
bus_remove_device+0xc6/0x130
device_del+0x161/0x3e0
device_unregister+0x17/0x60
sdw_delete_slave+0xb6/0xd0 [soundwire_bus]
sdw_bus_master_delete+0x1e/0x50 [soundwire_bus]
...
sof_probe_work+0x19/0x30 [snd_sof]
This was observed on a Lenovo ThinkPad X1 Carbon G14 (Panther Lake)
with the SOF audio driver probe failing due to missing Panther Lake
firmware, causing the subsequent cleanup of SoundWire devices to
trigger the crash.
Fix this with three changes:
1) Add a NULL guard in sdca_dev_unregister() so that callers do not
need to pre-validate the pointer (defense in depth).
2) In sdca_dev_unregister_functions(), skip NULL func_dev entries
and clear func_dev to NULL after unregistration, making the
function idempotent and safe against double-invocation.
3) In sdca_dev_register_functions(), roll back all previously
registered functions when a later one fails, so the function
array is never left in a partially-populated state.
Fixes: 4496d1c65b ("ASoC: SDCA: add function devices")
Signed-off-by: Kean Ren <rh_king@163.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260611023757.1553960-1-rh_king@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While system heap and system_cc_shared heap share a lot of code
and hence the same source file, their users have different needs.
system heap users need it to be a loadable module, while
system_cc_shared heap users don't.
Building as a loadable module breaks system_cc_shared heap on
powerpc and s390 due to un-exported set_memory_encrypted /
set_memory_decrypted functions.
Fix these by reorganising code to put the system_cc_shared heap
under a new Kconfig symbol, which allows either building both
into the kernel, or leave encryption up to the consumers of the
system heap.
Fixes: fd55edff8a ("dma-buf: heaps: system: Turn the heap into a module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: updated DMABUF_HEAPS_CC_SYSTEM to DMABUF_HEAPS_SYSTEM_CC_SHARED]
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260610142329.3836808-1-sumit.semwal@linaro.org
Add compatible string for TI SN65LVDS93. Similar to
SN65LVDS83 but with an industrial temperature range.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260518111203.639603-2-u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
In cs35l56_spi_system_reset() initialize val to zero before using it in
the read_poll_timeout(). This prevents testing an uninitialized value if
the regmap_read_bypassed() returns an error.
Read errors are intentionally ignored during this loop because the
device is resetting (though SPI can't really detect that so shouldn't
fail because of that, it's safer to ignore errors and keep polling).
Because of this, val must be initialized to something in case the first
read fails. The polling loop is looking for a non-zero value, so
initializing val to 0 will ensure that the loop continues until a valid
state is read from the device or it times out.
Fixes: 769c1b7929 ("ASoC: cs35l56: Prevent races when soft-resetting using SPI control")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260611132221.1100497-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent change switching to a dynamically allocated root device broke
platforms like rcar-sysc that registers PM domains before the PM domain
bus itself has been registered (cf. commit c5ae5a0c61 ("pmdomain:
renesas: rcar-sysc: Add genpd OF provider at postcore_initcall")).
Defer the assignment of the parent root device until the domain is
registered with driver core to avoid it being left unset.
Fixes: a96e40f4af ("pmdomain: core: switch to dynamic root device")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/CAMuHMdUHabMGJyJ7e7yp7DLC+JJc9k6NK9p4anj2wRKNuwZUng@mail.gmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The driver explicitly sets the .driver_data member of struct
pnp_device_id to zero without relying on that value. Drop these unused
assignments.
While touching this array use a named initializer for .id for improved
readability and simplify the list terminator.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with an x86 build.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/dd6e70d3075205a1d5c1fa324db7a822f37e2349.1781101905.git.u.kleine-koenig@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The hid-logitech-hidpp driver enables high resolution scrolling on
device connect for capable HID++ 2.0 devices. Driver also reads the
wheel capability and caches the returned high resolution wheel scroll
multiplier, that is used for scroll scaling when handling wheel scroll
events.
Wheel mode can also be set externally through HID++ requests, which
can leave the cached multiplier stale and cause incorrect scroll
scaling. If external SetWheelMode HID++ request sets the mode to
low resolution, the cached multiplier is not updated accordingly. This
causes extremely slow scrolling since driver expects multiple wheel
scroll events per detent but is only getting one.
The fix listens for HID++ SetWheelMode request responses and updates
the wheel scroll multiplier based on the set high resolution scroll
mode. The fix has been tested with Logitech G502X lightspeed mouse.
Signed-off-by: Lauri Saurus <saurla@saurla.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit 7af5b901e8 ("ARM: 9358/2: Implement PAN for LPAE by TTBR0
page table walks disablement") implemented PAN for LPAE kernels by
setting TTBCR.EPD0 on every kernel entry, disabling TTBR0 page-table
walks while running in kernel mode. The commit correctly updated
cpu_suspend() in arch/arm/kernel/suspend.c, but missed two other code
paths that switch the CPU to the identity mapping before jumping to
low-PA (TTBR0-range) physical addresses:
1. setup_mm_for_reboot() in arch/arm/mm/idmap.c, used by the kexec
reboot path. With TTBCR.EPD0 still set, the subsequent branch to
the identity-mapped cpu_v7_reset causes a PrefetchAbort because the
TTBR0 page-table walk needed to resolve the identity-mapped address
is disabled. This manifests as a hard hang or "bad PC value" panic
on LPAE kernels booted on CPUs that strictly enforce EPD0 for
instruction fetch (e.g. Cortex-A53 in AArch32 mode) while the same
image may accidentally work on Cortex-A15 due to microarchitectural
differences in EPD0 enforcement.
2. arch_restore_image() in arch/arm/kernel/hibernate.c, which calls
cpu_switch_mm(idmap_pgd, &init_mm) directly without going through
setup_mm_for_reboot(), leaving TTBCR.EPD0 set while the identity
mapping is active.
Fix both sites by calling uaccess_save_and_enable() before switching
to the identity mapping, mirroring what the original commit did for
cpu_suspend().
Assisted-by: Cursor:claude-sonnet-4.6
Fixes: 7af5b901e8 ("ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit 44e9a3bb76 ("ARM: 9430/1: entry: Do a dummy read from
VMAP shadow") added a dummy read from the KASAN VMAP stack shadow in
__switch_to(). The read uses ldr, but the KASAN shadow address is
byte-granular and is not guaranteed to be word aligned.
ARMv5 faults unaligned word loads. With CONFIG_KASAN_VMALLOC and
CONFIG_VMAP_STACK enabled, ARM926/VersatilePB crashes in __switch_to()
with an alignment exception before reaching init.
Use ldrb for the dummy shadow access. The code only needs to fault in the
shadow mapping if the stack shadow is missing, so a byte load is sufficient
and matches the granularity of KASAN shadow memory.
Fixes: 44e9a3bb76 ("ARM: 9430/1: entry: Do a dummy read from VMAP shadow")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
For CPUs before ARMv6, __raw_readw() and __raw_writew() are implemented
as C volatile halfword accesses so the compiler can generate an access
sequence that is safe for those machines. With KASAN enabled, those C
accesses are instrumented as normal memory accesses.
That is not valid for MMIO. On ARM926/VersatilePB with KASAN enabled,
PL011 probing traps in __asan_store2() while registering the UART, because
the instrumented writew() tries to check KASAN shadow for an MMIO address.
Keep the existing volatile halfword access, but move the ARMv5 definitions
into __no_kasan_or_inline functions so raw MMIO halfword accesses are not
instrumented by KASAN. The ARMv6-and-newer inline assembly path is
unchanged.
Fixes: 421015713b ("ARM: 9017/2: Enable KASan for ARM")
Cc: stable@vger.kernel.org # v5.11+
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
In case of failed HW the driver may not see an interrupt and will stuck
in waiting forever. We can avoid such situation by timing out of
transfers if the interrupt is not seen in a reasonable time.
This problem can be found on unload of ptp_ocp driver for TimeCard which
uses Xilinx SPI AXI and SPI-NOR flash memory. During tear-down process
spi-nor drivers send soft reset command which is not triggering an
interrupt stalling the unload process completely.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260610222843.782337-1-vadim.fedorenko@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
Even though the Allwinner A523 SoC implements 10 GPIO banks, it has
actually registers for 11 IRQ banks, and even an interrupt assigned to
the first, non-implemented IRQ bank.
Add that first interrupt to the list of GPIO interrupts, to correct the
association between IRQs and GPIO banks.
This fixes GPIO IRQ operation on boards with A523 SoCs, as seen by
broken SD card detect functionality, for instance.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: 35ac96f796 ("arm64: dts: allwinner: Add Allwinner A523 .dtsi file")
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260327113006.3135663-4-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
sch_cbs and sch_taprio print ecmd.base.speed, even if
netif_get_link_ksettings() failed. When netif_get_link_ksettings()
fails the ecmd may not be initialized.
Use the always-initialized speed variable instead.
The semantics change slightly because UNKNOWN will
never be printed, but that doesn't seem important
enough to complicate the code for.
This is a _dbg() print, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609183353.1109641-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A comment in drivers/iommu/apple-dart.c incorrectly refers to
CONFIG_PCI_APPLE instead of CONFIG_PCIE_APPLE. Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
A job that GuC never scheduled (never started) indicates a GuC
scheduling failure; previously such jobs were silently errored out
instead of triggering a GT reset to recover. Trigger a GT reset and
resubmit them, but only when the queue was not already killed or banned:
an unstarted job on an already banned queue is the ban working as
intended and must neither clear the ban nor kick off a reset, otherwise
a banned userspace queue could be resurrected and spam GT resets.
Kernel queues are always recovered this way and wedge the device once
recovery attempts are exhausted, since kernel work must not silently
fail. A started job that times out on a userspace VM bind queue stays
banned rather than being reset and retried.
The queue is banned early in the timeout handler to signal the G2H
scheduling-done handler so it wakes the disable-scheduling waiter;
without it the waiter sleeps the full 5s timeout. When a reset is
warranted the ban is cleared before rearming so that
guc_exec_queue_start() can resubmit jobs after the GT reset - a
still-banned queue would block resubmission and cause an infinite TDR
loop. The already-banned case is gated out before this point via
skip_timeout_check, so it is unaffected.
v2: (Himal) Do it for any queue type, not just kernel/migration
v3: - (Sashiko and Sanjay): don't clear the ban / GT reset for already
killed/banned queues on unstarted-job timeout
- Update commit message
- (Matt) Add Fixes tag
Fixes: fe05cee4d9 ("drm/xe: Don't short circuit TDR on jobs not started")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Assisted-by: GitHub-Copilot:claude-sonnet-4.6
Assisted-by: GitHub-Copilot:claude-opus-4.8
Tested-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260610152548.404575-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit b1107d085e)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
xe_range_fence_insert() acquires a reference on fence via
dma_fence_get() and stores it in rfence->fence. It then calls
dma_fence_add_callback() and handles two cases: when the callback
is successfully registered (err == 0) the fence is transferred to
the tree for later cleanup; when the fence is already signaled
(err == -ENOENT) it manually drops the extra reference with
dma_fence_put(fence).
However, dma_fence_add_callback() can fail with other errors
(e.g. -EINVAL) and in that case the code falls through to the free:
label without releasing the acquired reference, leaking it.
Fix the leak by adding an else branch that calls dma_fence_put()
before jumping to free: for any error other than -ENOENT.
Fixes: 845f64bdbf ("drm/xe: Introduce a range-fence utility")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260610172705.3450560-1-matthew.brost@intel.com
(cherry picked from commit 98c4a42012)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
This is a minor performance / conceptual fix.
1) ip6erspan_tunnel_xmit()
ERSPAN tunnel can mirror both IPv4 and IPv6 traffic, skb
(the packet being mirrored) can be an IPv4 packet,
and thus dst can be an IPv4 destination entry
Use dst_mtu() which contains generic logic for both families.
2) ip4ip6_err()
skb2 has been prepared as an IPv4 packet, and its destination
is an IPv4 route.
dst6_mtu() is optimized for IPv6 destinations and uses INDIRECT_CALL_1
to call ip6_mtu() directly if the ops match.
We should use dst4_mtu() instead.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609091337.2672441-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge an ACPI processor driver update, two ACPI CPPC library updates
and ACPI PCI/CXL support updates for 7.2-rc1:
- Add cpuidle driver check in acpi_processor_register_idle_driver() to
avoid evaluating _CST unnecessarily (Tony W Wang-oc)
- Suppress UBSAN warning caused by field misuse during PCC-based
register access in the ACPI CPPC library (Jeremy Linton)
- Add support for CPPC v4 to the ACPI CPPC library (Sumit Gupta)
- Update the ACPI device enumeration code to honor _DEP for ACPI0016
PCI/CXL host bridges and make the ACPI PCI root driver clear _DEP
dependencies for PCI roots that have become operational (Chen Pei)
* acpi-processor:
ACPI: processor: Add cpuidle driver check in acpi_processor_register_idle_driver()
* acpi-cppc:
ACPI: CPPC: Suppress UBSAN warning caused by field misuse
ACPI: CPPC: Add support for CPPC v4
* acpi-pci:
ACPI: scan: Honor _DEP for ACPI0016 PCI/CXL host bridge
ACPI: PCI: Clear _DEP dependencies after PCI root bridge attach
Merge ACPI button driver updates for 7.2-rc1:
- Clean up lid handling in the ACPI button driver and
acpi_button_probe(), reorganize installing and removing event
handlers in that driver and switch it over to using devres-based
resource management during probe (Rafael Wysocki)
* acpi-button:
ACPI: button: Switch over to devres-based resource management
ACPI: button: Reorganize installing and removing event handlers
ACPI: button: Use string literals for generating netlink messages
ACPI: button: Clean up adding and removing lid procfs interface
ACPI: button: Merge two switch () statements in acpi_button_probe()
ACPI: button: Drop redundant variable from acpi_button_probe()
ACPI: button: Rework device verification during probe
ACPI: button: Use local pointer to platform device dev field in probe
ACPI: button: Eliminate redundant conditional statement
ACPI: button: Change return type of two functions to void
ACPI: button: Eliminate ternary operator from acpi_lid_evaluate_state()
ACPI: button: Use bool for representing boolean values
ACPI: button: Improve warning message regarding lid state
ACPI: button: Pass ACPI handle to acpi_lid_evaluate_state()
ACPI: button: Fix lid_device value leak past driver removal
Merge updates of core ACPI device drivers for 7.2-rc1:
- Fix multiple issues related to probe, removal and missing NVDIMM
device notifications in the ACPI NFIT driver (Rafael Wysocki)
- Add support for devres-based management of ACPI notify handlers to
the ACPI core (Rafael Wysocki)
- Switch multiple core ACPI device drivers (including the ACPI PAD,
ACPI video bus, ACPI HED, ACPI thermal zone, ACPI AC, ACPI battery,
and ACPI NFIT drivers) over to using devres-based resource management
during probe (Rafael Wysocki)
- Replace mutex_lock/unlock() with guard()/scoped_guard() in the ACPI
PMIC driver (Maxwell Doose)
- Fix message kref handling in the dead device path of the ACPI IPMI
address space handler (Yuho Choi)
- Use sysfs_emit() in idlecpus_show() in the ACPI processor aggregator
device (PAD) driver (Yury Norov)
- Clean up device_id_scheme initialization in the ACPI video bus driver
(Jean-Ralph Aviles)
* acpi-driver: (26 commits)
ACPI: IPMI: Fix message kref handling on dead device
ACPI: NFIT: core: Fix possible deadlock and missing notifications
ACPI: NFIT: core: Eliminate redundant local variable
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
ACPI: NFIT: core: Fix possible NULL pointer dereference
ACPI: bus: Clean up devm_acpi_install_notify_handler()
ACPI: PAD: Use sysfs_emit() in idlecpus_show()
ACPI: video: Do not initialise device_id_scheme directly
ACPI: video: Switch over to devres-based resource management
ACPI: video: Use devm for video->entry and backlight cleanup
ACPI: video: Use devm action for freeing video devices
ACPI: video: Use devm action for video bus object cleanup
ACPI: video: Rearrange probe and remove code
ACPI: video: Reduce the number of auxiliary device dereferences
ACPI: PAD: Switch over to devres-based resource management
ACPI: PAD: Fix teardown ordering in acpi_pad_remove()
ACPI: PAD: Pass struct device pointer to acpi_pad_notify()
ACPI: PAD: Rearrange acpi_pad_notify()
ACPI: thermal: Switch over to devres-based resource management
ACPI: HED: Switch over to devres-based resource management
...
kvm_s390_get_cmma_bits() allocates its output buffer with vmalloc(),
which does not zero the returned pages:
values = vmalloc(args->count);
In the non-peek (migration) path, dat_get_cmma() reports a byte count
spanning from the first to the last dirty page, but __dat_get_cmma_pte()
writes values[gfn - start] only for pages whose CMMA dirty bit is set.
The walk uses DAT_WALK_IGN_HOLES, so clean and unmapped pages that lie
between two dirty pages within the reported span are visited but never
store their byte. Those gaps (up to KVM_S390_MAX_BIT_DISTANCE pages
each) stay uninitialized yet fall inside [0, count) and are copied out
by copy_to_user(), disclosing stale kernel memory to user space.
Before the switch to the new gmap implementation the buffer was fully
populated for every gfn in the span, so no uninitialized bytes were
exposed; the dirty-only walk introduced the leak.
Use vzalloc() so the gaps read back as zero.
Fixes: e38c884df9 ("KVM: s390: Switch to new gmap")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260611105036.11491-1-borntraeger@linux.ibm.com>
pinctrl consumers can request states while the pinctrl core enables the
controller. On Qualcomm pinctrl drivers this can happen before the SoC
function list has been registered, which leaves the function table
incomplete during state lookup.
On APQ8064 this can fail while claiming pinctrl hogs:
apq8064-pinctrl 800000.pinctrl: invalid function ps_hold in map table
apq8064-pinctrl 800000.pinctrl: error claiming hogs: -22
apq8064-pinctrl 800000.pinctrl: could not claim hogs: -22
Register Qualcomm pinctrl with devm_pinctrl_register_and_init(), add the
SoC pin functions, and only then enable the pinctrl device.
Signed-off-by: Alexandre MINETTE <contact@alex-min.fr>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Use pinctrl_find_gpio_range_from_pin_nolock() instead of
pinctrl_find_gpio_range_from_pin() when configuring a pin or
setting a GPIO value.
This avoids taking the lock and allows the code to be safely
called from interrupt context.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add support for the pin controller on the UltraRISC DP1000 SoC.
The controller provides mux selection for pins in ports A, B, C, D, and
LPC. Ports A-D default to GPIO and support peripheral muxing. LPC pins
can be switched to eSPI, but are not available as GPIOs. Basic pin
configuration controls such as drive strength, pull-up, and pull-down
are also supported.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add doc for the pinctrl controllers on the UltraRISC DP1000 RISC-V SoC.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Merge ACPICA updates for 7.2-rc1 including the following changes:
- Add support for the Legacy Virtual Register (LVR) field in I2C serial
bus resource descriptors to ACPICA (Akhil R)
- Fix multiple issues related to bounds checks, input validation,
use-after-free, and integer overflow checks in the AML interpreter
in ACPICA (ikaros)
- Update the copyright year to 2026 in ACPICA files and make minor
changes related to ACPI 6.6 support (Pawel Chmielewski)
- Remove spurious precision from format used to dump parse trees in
ACPICA (David Laight)
- Add modern standby DSM GUIDs to ACPICA header files (Daniel Schaefer)
- Fix FADT 32/64X length mismatch warning in ACPICA (Abdelkader Boudih)
- Update D3hot/cold device power states definitions in ACPICA header
files (Aymeric Wibo)
- Fix NULL pointer dereference in acpi_ns_custom_package() (Weiming
Shi)
- Update ACPICA version to 20260408 (Saket Dumbre)
* acpica: (27 commits)
ACPICA: add boundary checks in two places
ACPICA: Add package limit checks in parser functions
ACPICA: Update version to 20260408
ACPICA: Update the copyright year to 2026
ACPICA: Remove spurious precision from format used to dump parse trees
ACPICA: Enhance OEM ID and Table ID validation in acpi_ex_load_table_op()
ACPICA: Fix NULL pointer dereference in acpi_ns_custom_package()
ACPICA: Enhance buffer validation in acpi_ut_walk_aml_resources()
ACPICA: Add validation for node in acpi_ns_build_normalized_path()
ACPICA: validate handler object type in two places
ACPICA: Improve argument parsing in acpi_ps_get_next_simple_arg()
ACPICA: Fix integer overflow in acpi_ex_opcode_3A_1T_1R() (mid_op)
ACPICA: Prevent adding invalid references
ACPICA: add boundary checks in acpi_ps_get_next_field()
ACPICA: validate byte_count in acpi_ps_get_next_package_length()
ACPICA: Fix use-after-free in acpi_ds_terminate_control_method()
ACPICA: fix I2C LVR item count in the conversion table
ACPICA: Mention the LVR bits
ACPICA: Change LVR to 8 bit value
ACPICA: Fetch LVR I2C resource descriptor
...
kvm_io_bus_register_dev() and kvm_io_bus_unregister_dev() should be
called under kvm->slots_lock. The unregister calls in ipi.c, eiointc.c
and pch_pic.c were also missing this protection. Add it to match the
register side.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Zeng Chi <zengchi@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Sashiko reported that the irqchip index is not validated for LoongArch.
Add validation and reject out-of-range irqchip indexes to avoid indexing
past the routing table's chip array.
Cc: stable@vger.kernel.org
Fixes: 1928254c5c ("LoongArch: KVM: Add irqfd support")
Closes: https://lore.kernel.org/kvm/20260525051714.485D51F000E9@smtp.kernel.org/
Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Yanfei Xu <yanfei.xu@bytedance.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The LoongArch CSRXCHG instruction returns the full old CSR value in rd
after applying the masked update. kvm_emu_xchg_csr() currently masks
the saved value before returning it to the guest, so rd receives only
the bits selected by the write mask.
That breaks the architectural behavior and makes a zero mask return 0
instead of the previous CSR value. So, keep the masked CSR update, but
return the unmodified old CSR value.
Cc: stable@vger.kernel.org
Fixes: da50f5a693 ("LoongArch: KVM: Implement handle csr exception")
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
